197062 |
10-Sep-2009 |
jhb |
Don't malloc a buffer while holding the prison0 mutex. Instead, use a loop where we figure out the hostname length under the lock, malloc the buffer with the lock dropped, then recheck the length under the lock and loop again if the buffer is now too small.
Tested by: Norbert Koch nkoch demig de MFC after: 3 days
|
193066 |
29-May-2009 |
jamie |
Place hostnames and similar information fully under the prison system. The system hostname is now stored in prison0, and the global variable "hostname" has been removed, as has the hostname_mtx mutex. Jails may have their own host information, or they may inherit it from the parent/system. The proper way to read the hostname is via getcredhostname(), which will copy either the hostname associated with the passed cred, or the system hostname if you pass NULL. The system hostname can still be accessed directly (and without locking) at prison0.pr_host, but that should be avoided where possible.
The "similar information" referred to is domainname, hostid, and hostuuid, which have also become prison parameters and had their associated global variables removed.
Approved by: bz (mentor)
|
181803 |
17-Aug-2008 |
bz |
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course of the next few weeks.
Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
|
180291 |
05-Jul-2008 |
rwatson |
Introduce a new lock, hostname_mtx, and use it to synchronize access to global hostname and domainname variables. Where necessary, copy to or from a stack-local buffer before performing copyin() or copyout(). A few uses, such as in cd9660 and daemon_saver, remain under-synchronized and will require further updates.
Correct a bug in which a failed copyin() of domainname would leave domainname potentially corrupted.
MFC after: 3 weeks
|
56043 |
15-Jan-2000 |
yokota |
This is the 3rd stage of syscons code reorganization.
- Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.)
- Put sysmouse related code in a separate file, thus, simplifying the main part of the driver.
As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time.
You shouldn't see any functional change by this commit; this is only internal code reorganization.
|
48104 |
22-Jun-1999 |
yokota |
The second phase of syscons reorganization.
- Split syscons source code into manageable chunks and reorganize some of complicated functions.
- Many static variables are moved to the softc structure.
- Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
- Modified the kernel console input function sccngetc() so that it handles function keys properly.
- Reorganized the screen update routine.
- VT switching code is reorganized. It now should be slightly more robust than before.
- Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly.
- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced.
SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons.
SC_DISABLE_DDBKEY Disables the `debug' key combination.
SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)
SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only.
- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.
- The video driver provides a set of ioctl commands to manipulate the frame buffer.
- New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.
- The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons.
- Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1.
- Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
|
42504 |
11-Jan-1999 |
yokota |
The first stage of console driver reorganization: activate new keyboard and video card drivers.
Because of the changes, you are required to update your kernel configuration file now!
The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet.
syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
|
39287 |
15-Sep-1998 |
sos |
Add VESA support to syscons.
Kazu writes:
The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA"
The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600
The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers.
vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter.
Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
|
32571 |
16-Jan-1998 |
bde |
Include <machine/pc/display.h>, not <i386/include/pc/display.h>. This is not quite correct, because the Makefiles in lkm/syscons don't set up the `machine' symlink, but other, more volatile headers in <machine> are already used.
|
27427 |
15-Jul-1997 |
yokota |
Incorporated lots of fixes and suggestions from Bruce and changes to facilitate the new saver loading/unloading notification interface in syscons.
daemon_saver: - M_NOWAIT was wrong, since NULL returns are not handled. Just use M_WAITOK. - use `ostype' instead of hard-coded "FreeBSD". Now there is no more hard-coded string! (But, who will run this screen saver on other OS?!) - put macros and data declarations in a consistent order. - -DDEAMON_ONLY and -DSHOW_HOSTNAME options added in the previous commit are removed. Options of this kind can go stale and no one notices because no one uses them. DEAMON_ONLY is just removed. SHOW_HOSTNAME is made default.
snake_saver: - use `ostype' and `osrelease' as in the daemon saver. The string changes slightly - there was a hyphen after "FreeBSD"; now there is a space. (It is consistent with uname -a, like the daemon server already is.)
all screen savers: - Use the new add_scrn_saver()/remove_scrn_saver() in syscons.c to declare loading/unloading of a screen saver. Removed reference to `current_saver' and the variable `old_saver' as they are not necessary anymore. - The blank, fade and green screen savers manipulate VGA registers. Module loading should fail for non-VGA cards. - `scrn_blanked' is consistently treated as a number/counter rather than boolean. - Some savers touch `scp->start' and `scp->end' to force entire screen update when stopping themselves. This is unnecessary now because syscons.c takes care of that. - cleared up many unused or unnecessary #include statements. - Removed -DLKM from Makefiles.
YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THIS CHANGE.
|