mly_tables.h revision 331722 
1/*-
2 * Copyright (c) 2000 Michael Smith
3 * Copyright (c) 2000 BSDi
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 *	$FreeBSD: stable/11/sys/dev/mly/mly_tables.h 331722 2018-03-29 02:50:57Z eadler $
28 */
29
30/*
31 * Lookup table for code-to-text translations.
32 */
33struct mly_code_lookup {
34    char	*string;
35    u_int32_t	code;
36};
37
38static char	*mly_describe_code(struct mly_code_lookup *table, u_int32_t code);
39
40/********************************************************************************
41 * Look up a text description of a numeric code and return a pointer to same.
42 */
43static char *
44mly_describe_code(struct mly_code_lookup *table, u_int32_t code)
45{
46    int		i;
47
48    for (i = 0; table[i].string != NULL; i++)
49	if (table[i].code == code)
50	    return(table[i].string);
51    return(table[i+1].string);
52}
53
54#if 0
55static struct mly_code_lookup mly_table_bustype[] = {
56    {"SCSI",		0x00},
57    {"FC-AL",		0x01},
58    {"PCI",		0x03},
59    {NULL,		0},
60    {"unknown bus",	0}
61};
62#endif
63
64static struct mly_code_lookup mly_table_controllertype[] = {
65#if 0	/* not supported by this driver */
66    {"DAC960E",		0x01},	/* EISA */
67    {"DAC960M",		0x08},	/* MCA */
68    {"DAC960PD",	0x10},	/* PCI Dual */
69    {"DAC960PL",	0x11},	/* PCU low-cost */
70    {"DAC960PDU",	0x12},	/* PD Ultra */
71    {"DAC960PE",	0x13},	/* Peregrine low-cost */
72    {"DAC960PG",	0x14},	/* Peregrine high-performance */
73    {"DAC960PJ",	0x15},	/* Road Runner */
74    {"DAC960PTL0",	0x16},	/* Jaguar */
75    {"DAC960PR",	0x17},	/* Road Runner (again?) */
76    {"DAC960PRL",	0x18},	/* Tomcat */
77    {"DAC960PT",	0x19},	/* Road Runner (yet again?) */
78    {"DAC1164P",	0x1a},	/* Little Apple */
79    {"DAC960PTL1",	0x1b},	/* Jaguar+ */
80#endif
81    {"EXR2000P",	0x1c},	/* Big Apple */
82    {"EXR3000P",	0x1d},	/* Fibre Apple */
83    {"AcceleRAID 352",	0x1e},	/* Leopard */
84    {"AcceleRAID 170",	0x1f},	/* Lynx */
85    {"AcceleRAID 160",	0x20},	/* Bobcat */
86    {NULL,		0},
87    {"unknown adapter",	0}
88};
89
90static struct mly_code_lookup mly_table_oemname[] = {
91    {"Mylex",		MLY_OEM_MYLEX},
92    {"IBM",		MLY_OEM_IBM},
93    {"Hewlett-Packard",	MLY_OEM_HP},
94    {"DEC/Compaq",	MLY_OEM_DEC},
95    {"Siemens",		MLY_OEM_SIEMENS},
96    {"Intel",		MLY_OEM_INTEL},
97    {NULL,		0},
98    {"unknown OEM",	0}
99};
100
101static struct mly_code_lookup mly_table_memorytype[] = {
102    {"DRAM",		0x01},
103    {"EDRAM",		0x02},
104    {"EDO RAM",		0x03},
105    {"SDRAM",		0x04},
106    {NULL,		0},
107    {"unknown memory",	0}
108};
109
110static struct mly_code_lookup mly_table_cputype[] = {
111    {"i960CA",		0x01},
112    {"i960RD",		0x02},
113    {"i960RN",		0x03},
114    {"i960RP",		0x04},
115    {"NorthBay(?)",	0x05},
116    {"StrongArm",	0x06},
117    {"i960RM",		0x07},
118    {NULL,		0},
119    {"unknown CPU",	0}
120};
121
122/*
123 * This table is directly derived from the corresponding table in the
124 * Linux driver, and uses a derivative encoding for simplicity's sake.
125 *
126 * The first character of the string determines the format of the message.
127 *
128 * p  "physical device <channel>:<target> <text>"	(physical device status)
129 * s  "physical device <channel>:<target> <text>"	(scsi message or error)
130 *    "  sense key <key>  asc <asc>  ascq <ascq>"
131 *    "  info <info>   csi <csi>"
132 * l  "logical drive <unit>: <text>"			(logical device status)
133 * m  "logical drive <unit>: <text>"			(logical device message)
134 *
135 * Messages which are typically suppressed have the first character capitalised.
136 * These messages will only be printed if bootverbose is set.
137 *
138 * The second character in the string indicates an action to be taken as a
139 * result of the event.
140 *
141 * r	rescan the device for possible state change
142 *
143 */
144static struct mly_code_lookup mly_table_event[] = {
145    /* physical device events (0x0000 - 0x007f) */
146    {"pr online",							0x0001},
147    {"pr standby",							0x0002},
148    {"p  automatic rebuild started",					0x0005},
149    {"p  manual rebuild started",					0x0006},
150    {"pr rebuild completed",						0x0007},
151    {"pr rebuild cancelled",						0x0008},
152    {"pr rebuild failed for unknown reasons",				0x0009},
153    {"pr rebuild failed due to new physical device",			0x000a},
154    {"pr rebuild failed due to logical drive failure",			0x000b},
155    {"sr offline",							0x000c},
156    {"pr found",							0x000d},
157    {"pr gone",								0x000e},
158    {"p  unconfigured",							0x000f},
159    {"p  expand capacity started",					0x0010},
160    {"pr expand capacity completed",					0x0011},
161    {"pr expand capacity failed",					0x0012},
162    {"p  parity error",							0x0016},
163    {"p  soft error",							0x0017},
164    {"p  miscellaneous error",						0x0018},
165    {"p  reset",							0x0019},
166    {"p  active spare found",						0x001a},
167    {"p  warm spare found",						0x001b},
168    {"s  sense data received",						0x001c},
169    {"p  initialization started",					0x001d},
170    {"pr initialization completed",					0x001e},
171    {"pr initialization failed",					0x001f},
172    {"pr initialization cancelled",					0x0020},
173    {"P  write recovery failed",					0x0021},
174    {"p  scsi bus reset failed",					0x0022},
175    {"p  double check condition",					0x0023},
176    {"p  device cannot be accessed",					0x0024},
177    {"p  gross error on scsi processor",				0x0025},
178    {"p  bad tag from device",						0x0026},
179    {"p  command timeout",						0x0027},
180    {"pr system reset",							0x0028},
181    {"p  busy status or parity error",					0x0029},
182    {"pr host set device to failed state",				0x002a},
183    {"pr selection timeout",						0x002b},
184    {"p  scsi bus phase error",						0x002c},
185    {"pr device returned unknown status",				0x002d},
186    {"pr device not ready",						0x002e},
187    {"p  device not found at startup",					0x002f},
188    {"p  COD write operation failed",					0x0030},
189    {"p  BDT write operation failed",					0x0031},
190    {"p  missing at startup",						0x0039},
191    {"p  start rebuild failed due to physical drive too small",		0x003a},
192    /* logical device events (0x0080 - 0x00ff) */
193    {"m  consistency check started",					0x0080},
194    {"mr consistency check completed",					0x0081},
195    {"mr consistency check cancelled",					0x0082},
196    {"mr consistency check completed with errors",			0x0083},
197    {"mr consistency check failed due to logical drive failure",	0x0084},
198    {"mr consistency check failed due to physical device failure",	0x0085},
199    {"lr offline",							0x0086},
200    {"lr critical",							0x0087},
201    {"lr online",							0x0088},
202    {"m  automatic rebuild started",					0x0089},
203    {"m  manual rebuild started",					0x008a},
204    {"mr rebuild completed",						0x008b},
205    {"mr rebuild cancelled",						0x008c},
206    {"mr rebuild failed for unknown reasons",				0x008d},
207    {"mr rebuild failed due to new physical device",			0x008e},
208    {"mr rebuild failed due to logical drive failure",			0x008f},
209    {"l  initialization started",					0x0090},
210    {"lr initialization completed",					0x0091},
211    {"lr initialization cancelled",					0x0092},
212    {"lr initialization failed",					0x0093},
213    {"lr found",							0x0094},
214    {"lr gone",								0x0095},
215    {"l  expand capacity started",					0x0096},
216    {"lr expand capacity completed",					0x0097},
217    {"lr expand capacity failed",					0x0098},
218    {"l  bad block found",						0x0099},
219    {"lr size changed",							0x009a},
220    {"lr type changed",							0x009b},
221    {"l  bad data block found",						0x009c},
222    {"l  read of data block in bdt",					0x009e},
223    {"l  write back data for disk block lost",				0x009f},
224    /* enclosure management events (0x0100 - 0x017f) */
225    {"e  enclosure %d fan %d failed",					0x0140},
226    {"e  enclosure %d fan %d ok",					0x0141},
227    {"e  enclosure %d fan %d not present",				0x0142},
228    {"e  enclosure %d power supply %d failed",				0x0143},
229    {"e  enclosure %d power supply %d ok",				0x0144},
230    {"e  enclosure %d power supply %d not present",			0x0145},
231    {"e  enclosure %d temperature sensor %d failed",			0x0146},
232    {"e  enclosure %d temperature sensor %d critical",			0x0147},
233    {"e  enclosure %d temperature sensor %d ok",			0x0148},
234    {"e  enclosure %d temperature sensor %d not present",		0x0149},
235    {"e  enclosure %d unit %d access critical",				0x014a},
236    {"e  enclosure %d unit %d access ok",				0x014b},
237    {"e  enclosure %d unit %d access offline",				0x014c},
238    /* controller events (0x0180 - 0x01ff) */
239    {"c  cache write back error",					0x0181},
240    {"c  battery backup unit found",					0x0188},
241    {"c  battery backup unit charge level low",				0x0189},
242    {"c  battery backup unit charge level ok",				0x018a},
243    {"c  installation aborted",						0x0193},
244    {"c  mirror race recovery in progress",				0x0195},
245    {"c  mirror race on critical drive",				0x0196},
246    {"c  memory soft ecc error",					0x019e},
247    {"c  memory hard ecc error",					0x019f},
248    {"c  battery backup unit failed",					0x01a2},
249    {NULL, 0},
250    {"?  unknown event code",						0}
251};
252
253/*
254 * Values here must be 16 characters or less, as they are packed into
255 * the 'product' field in the SCSI inquiry data.
256 */
257static struct mly_code_lookup mly_table_device_state[] = {
258    {"offline",		MLY_DEVICE_STATE_OFFLINE},
259    {"unconfigured",	MLY_DEVICE_STATE_UNCONFIGURED},
260    {"online",		MLY_DEVICE_STATE_ONLINE},
261    {"critical",	MLY_DEVICE_STATE_CRITICAL},
262    {"writeonly",	MLY_DEVICE_STATE_WRITEONLY},
263    {"standby",		MLY_DEVICE_STATE_STANDBY},
264    {"missing",		MLY_DEVICE_STATE_MISSING},
265    {NULL, 0},
266    {"unknown state",	0}
267};
268
269/*
270 * Values here must be 8 characters or less, as they are packed into
271 * the 'vendor' field in the SCSI inquiry data.
272 */
273static struct mly_code_lookup mly_table_device_type[] = {
274    {"RAID 0",		MLY_DEVICE_TYPE_RAID0},
275    {"RAID 1",		MLY_DEVICE_TYPE_RAID1},
276    {"RAID 3",		MLY_DEVICE_TYPE_RAID3},		/* right asymmetric parity */
277    {"RAID 5",		MLY_DEVICE_TYPE_RAID5},		/* right asymmetric parity */
278    {"RAID 6",		MLY_DEVICE_TYPE_RAID6},		/* Mylex RAID 6 */
279    {"RAID 7",		MLY_DEVICE_TYPE_RAID7},		/* JBOD */
280    {"SPAN",		MLY_DEVICE_TYPE_NEWSPAN},	/* New Mylex SPAN */
281    {"RAID 3",		MLY_DEVICE_TYPE_RAID3F},	/* fixed parity */
282    {"RAID 3",		MLY_DEVICE_TYPE_RAID3L},	/* left symmetric parity */
283    {"SPAN",		MLY_DEVICE_TYPE_SPAN},		/* current spanning implementation */
284    {"RAID 5",		MLY_DEVICE_TYPE_RAID5L},	/* left symmetric parity */
285    {"RAID E",		MLY_DEVICE_TYPE_RAIDE},		/* concatenation */
286    {"PHYSICAL",	MLY_DEVICE_TYPE_PHYSICAL},	/* physical device */
287    {NULL, 0},
288    {"UNKNOWN",		0}
289};
290
291#if 0
292static struct mly_code_lookup mly_table_stripe_size[] = {
293    {"NONE",		MLY_STRIPE_ZERO},
294    {"512B",		MLY_STRIPE_512b},
295    {"1k",		MLY_STRIPE_1k},
296    {"2k",		MLY_STRIPE_2k},
297    {"4k",		MLY_STRIPE_4k},
298    {"8k",		MLY_STRIPE_8k},
299    {"16k",		MLY_STRIPE_16k},
300    {"32k",		MLY_STRIPE_32k},
301    {"64k",		MLY_STRIPE_64k},
302    {"128k",		MLY_STRIPE_128k},
303    {"256k",		MLY_STRIPE_256k},
304    {"512k",		MLY_STRIPE_512k},
305    {"1M",		MLY_STRIPE_1m},
306    {NULL, 0},
307    {"unknown",		0}
308};
309
310static struct mly_code_lookup mly_table_cacheline_size[] = {
311    {"NONE",		MLY_CACHELINE_ZERO},
312    {"512B",		MLY_CACHELINE_512b},
313    {"1k",		MLY_CACHELINE_1k},
314    {"2k",		MLY_CACHELINE_2k},
315    {"4k",		MLY_CACHELINE_4k},
316    {"8k",		MLY_CACHELINE_8k},
317    {"16k",		MLY_CACHELINE_16k},
318    {"32k",		MLY_CACHELINE_32k},
319    {"64k",		MLY_CACHELINE_64k},
320    {NULL, 0},
321    {"unknown",		0}
322};
323#endif
324