mpi_raid.h revision 330897
1/* $FreeBSD: stable/11/sys/dev/mpt/mpilib/mpi_raid.h 330897 2018-03-14 03:19:51Z eadler $ */
2/*-
3 * SPDX-License-Identifier: BSD-3-Clause
4 *
5 * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are
10 * met:
11 * 1. Redistributions of source code must retain the above copyright
12 *    notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 *    substantially similar to the "NO WARRANTY" disclaimer below
15 *    ("Disclaimer") and any redistribution must be conditioned upon including
16 *    a substantially similar Disclaimer requirement for further binary
17 *    redistribution.
18 * 3. Neither the name of the LSI Logic Corporation nor the names of its
19 *    contributors may be used to endorse or promote products derived from
20 *    this software without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
26 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
32 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 *           Name:  mpi_raid.h
35 *          Title:  MPI RAID message and structures
36 *  Creation Date:  February 27, 2001
37 *
38 *    mpi_raid.h Version:  01.05.05
39 *
40 *  Version History
41 *  ---------------
42 *
43 *  Date      Version   Description
44 *  --------  --------  ------------------------------------------------------
45 *  02-27-01  01.01.01  Original release for this file.
46 *  03-27-01  01.01.02  Added structure offset comments.
47 *  08-08-01  01.02.01  Original release for v1.2 work.
48 *  09-28-01  01.02.02  Major rework for MPI v1.2 Integrated RAID changes.
49 *  10-04-01  01.02.03  Added ActionData defines for
50 *                      MPI_RAID_ACTION_DELETE_VOLUME action.
51 *  11-01-01  01.02.04  Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC.
52 *  03-14-02  01.02.05  Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT.
53 *  05-07-02  01.02.06  Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME,
54 *                      MPI_RAID_ACTION_INACTIVATE_VOLUME, and
55 *                      MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
56 *  07-12-02  01.02.07  Added structures for Mailbox request and reply.
57 *  11-15-02  01.02.08  Added missing MsgContext field to MSG_MAILBOX_REQUEST.
58 *  04-01-03  01.02.09  New action data option flag for
59 *                      MPI_RAID_ACTION_DELETE_VOLUME.
60 *  05-11-04  01.03.01  Original release for MPI v1.3.
61 *  08-19-04  01.05.01  Original release for MPI v1.5.
62 *  01-15-05  01.05.02  Added defines for the two new RAID Actions for
63 *                      _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
64 *  02-28-07  01.05.03  Added new RAID Action, Device FW Update Mode, and
65 *                      associated defines.
66 *  08-07-07  01.05.04  Added Disable Full Rebuild bit to the ActionDataWord
67 *                      for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
68 *  01-15-08  01.05.05  Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
69 *  --------------------------------------------------------------------------
70 */
71
72#ifndef MPI_RAID_H
73#define MPI_RAID_H
74
75
76/******************************************************************************
77*
78*        R A I D    M e s s a g e s
79*
80*******************************************************************************/
81
82
83/****************************************************************************/
84/* RAID Action Request                                                      */
85/****************************************************************************/
86
87typedef struct _MSG_RAID_ACTION
88{
89    U8                      Action;             /* 00h */
90    U8                      Reserved1;          /* 01h */
91    U8                      ChainOffset;        /* 02h */
92    U8                      Function;           /* 03h */
93    U8                      VolumeID;           /* 04h */
94    U8                      VolumeBus;          /* 05h */
95    U8                      PhysDiskNum;        /* 06h */
96    U8                      MsgFlags;           /* 07h */
97    U32                     MsgContext;         /* 08h */
98    U32                     Reserved2;          /* 0Ch */
99    U32                     ActionDataWord;     /* 10h */
100    SGE_SIMPLE_UNION        ActionDataSGE;      /* 14h */
101} MSG_RAID_ACTION_REQUEST, MPI_POINTER PTR_MSG_RAID_ACTION_REQUEST,
102  MpiRaidActionRequest_t , MPI_POINTER pMpiRaidActionRequest_t;
103
104
105/* RAID Action request Action values */
106
107#define MPI_RAID_ACTION_STATUS                      (0x00)
108#define MPI_RAID_ACTION_INDICATOR_STRUCT            (0x01)
109#define MPI_RAID_ACTION_CREATE_VOLUME               (0x02)
110#define MPI_RAID_ACTION_DELETE_VOLUME               (0x03)
111#define MPI_RAID_ACTION_DISABLE_VOLUME              (0x04)
112#define MPI_RAID_ACTION_ENABLE_VOLUME               (0x05)
113#define MPI_RAID_ACTION_QUIESCE_PHYS_IO             (0x06)
114#define MPI_RAID_ACTION_ENABLE_PHYS_IO              (0x07)
115#define MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS      (0x08)
116#define MPI_RAID_ACTION_PHYSDISK_OFFLINE            (0x0A)
117#define MPI_RAID_ACTION_PHYSDISK_ONLINE             (0x0B)
118#define MPI_RAID_ACTION_CHANGE_PHYSDISK_SETTINGS    (0x0C)
119#define MPI_RAID_ACTION_CREATE_PHYSDISK             (0x0D)
120#define MPI_RAID_ACTION_DELETE_PHYSDISK             (0x0E)
121#define MPI_RAID_ACTION_FAIL_PHYSDISK               (0x0F)
122#define MPI_RAID_ACTION_REPLACE_PHYSDISK            (0x10)
123#define MPI_RAID_ACTION_ACTIVATE_VOLUME             (0x11)
124#define MPI_RAID_ACTION_INACTIVATE_VOLUME           (0x12)
125#define MPI_RAID_ACTION_SET_RESYNC_RATE             (0x13)
126#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE         (0x14)
127#define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE       (0x15)
128#define MPI_RAID_ACTION_SET_VOLUME_NAME             (0x16)
129
130/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
131#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC           (0x00000001)
132#define MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT        (0x00000002)
133
134/* ActionDataWord defines for use with MPI_RAID_ACTION_DELETE_VOLUME action */
135#define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS       (0x00000000)
136#define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS        (0x00000001)
137
138#define MPI_RAID_ACTION_ADATA_KEEP_LBA0             (0x00000000)
139#define MPI_RAID_ACTION_ADATA_ZERO_LBA0             (0x00000002)
140
141/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
142#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD  (0x00000001)
143
144/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
145#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL        (0x00000001)
146
147/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_RESYNC_RATE action */
148#define MPI_RAID_ACTION_ADATA_RESYNC_RATE_MASK      (0x000000FF)
149
150/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_DATA_SCRUB_RATE action */
151#define MPI_RAID_ACTION_ADATA_DATA_SCRUB_RATE_MASK  (0x000000FF)
152
153/* ActionDataWord defines for use with MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
154#define MPI_RAID_ACTION_ADATA_ENABLE_FW_UPDATE          (0x00000001)
155#define MPI_RAID_ACTION_ADATA_MASK_FW_UPDATE_TIMEOUT    (0x0000FF00)
156#define MPI_RAID_ACTION_ADATA_SHIFT_FW_UPDATE_TIMEOUT   (8)
157
158
159/* RAID Action reply message */
160
161typedef struct _MSG_RAID_ACTION_REPLY
162{
163    U8                      Action;             /* 00h */
164    U8                      Reserved;           /* 01h */
165    U8                      MsgLength;          /* 02h */
166    U8                      Function;           /* 03h */
167    U8                      VolumeID;           /* 04h */
168    U8                      VolumeBus;          /* 05h */
169    U8                      PhysDiskNum;        /* 06h */
170    U8                      MsgFlags;           /* 07h */
171    U32                     MsgContext;         /* 08h */
172    U16                     ActionStatus;       /* 0Ch */
173    U16                     IOCStatus;          /* 0Eh */
174    U32                     IOCLogInfo;         /* 10h */
175    U32                     VolumeStatus;       /* 14h */
176    U32                     ActionData;         /* 18h */
177} MSG_RAID_ACTION_REPLY, MPI_POINTER PTR_MSG_RAID_ACTION_REPLY,
178  MpiRaidActionReply_t, MPI_POINTER pMpiRaidActionReply_t;
179
180
181/* RAID Volume reply ActionStatus values */
182
183#define MPI_RAID_ACTION_ASTATUS_SUCCESS             (0x0000)
184#define MPI_RAID_ACTION_ASTATUS_INVALID_ACTION      (0x0001)
185#define MPI_RAID_ACTION_ASTATUS_FAILURE             (0x0002)
186#define MPI_RAID_ACTION_ASTATUS_IN_PROGRESS         (0x0003)
187
188
189/* RAID Volume reply RAID Volume Indicator structure */
190
191typedef struct _MPI_RAID_VOL_INDICATOR
192{
193    U64                     TotalBlocks;        /* 00h */
194    U64                     BlocksRemaining;    /* 08h */
195} MPI_RAID_VOL_INDICATOR, MPI_POINTER PTR_MPI_RAID_VOL_INDICATOR,
196  MpiRaidVolIndicator_t, MPI_POINTER pMpiRaidVolIndicator_t;
197
198
199/****************************************************************************/
200/* SCSI IO RAID Passthrough Request                                         */
201/****************************************************************************/
202
203typedef struct _MSG_SCSI_IO_RAID_PT_REQUEST
204{
205    U8                      PhysDiskNum;        /* 00h */
206    U8                      Reserved1;          /* 01h */
207    U8                      ChainOffset;        /* 02h */
208    U8                      Function;           /* 03h */
209    U8                      CDBLength;          /* 04h */
210    U8                      SenseBufferLength;  /* 05h */
211    U8                      Reserved2;          /* 06h */
212    U8                      MsgFlags;           /* 07h */
213    U32                     MsgContext;         /* 08h */
214    U8                      LUN[8];             /* 0Ch */
215    U32                     Control;            /* 14h */
216    U8                      CDB[16];            /* 18h */
217    U32                     DataLength;         /* 28h */
218    U32                     SenseBufferLowAddr; /* 2Ch */
219    SGE_IO_UNION            SGL;                /* 30h */
220} MSG_SCSI_IO_RAID_PT_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REQUEST,
221  SCSIIORaidPassthroughRequest_t, MPI_POINTER pSCSIIORaidPassthroughRequest_t;
222
223
224/* SCSI IO RAID Passthrough reply structure */
225
226typedef struct _MSG_SCSI_IO_RAID_PT_REPLY
227{
228    U8                      PhysDiskNum;        /* 00h */
229    U8                      Reserved1;          /* 01h */
230    U8                      MsgLength;          /* 02h */
231    U8                      Function;           /* 03h */
232    U8                      CDBLength;          /* 04h */
233    U8                      SenseBufferLength;  /* 05h */
234    U8                      Reserved2;          /* 06h */
235    U8                      MsgFlags;           /* 07h */
236    U32                     MsgContext;         /* 08h */
237    U8                      SCSIStatus;         /* 0Ch */
238    U8                      SCSIState;          /* 0Dh */
239    U16                     IOCStatus;          /* 0Eh */
240    U32                     IOCLogInfo;         /* 10h */
241    U32                     TransferCount;      /* 14h */
242    U32                     SenseCount;         /* 18h */
243    U32                     ResponseInfo;       /* 1Ch */
244} MSG_SCSI_IO_RAID_PT_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REPLY,
245  SCSIIORaidPassthroughReply_t, MPI_POINTER pSCSIIORaidPassthroughReply_t;
246
247
248/****************************************************************************/
249/* Mailbox reqeust structure */
250/****************************************************************************/
251
252typedef struct _MSG_MAILBOX_REQUEST
253{
254    U16                     Reserved1;
255    U8                      ChainOffset;
256    U8                      Function;
257    U16                     Reserved2;
258    U8                      Reserved3;
259    U8                      MsgFlags;
260    U32                     MsgContext;
261    U8                      Command[10];
262    U16                     Reserved4;
263    SGE_IO_UNION            SGL;
264} MSG_MAILBOX_REQUEST, MPI_POINTER PTR_MSG_MAILBOX_REQUEST,
265  MailboxRequest_t, MPI_POINTER pMailboxRequest_t;
266
267
268/* Mailbox reply structure */
269typedef struct _MSG_MAILBOX_REPLY
270{
271    U16                     Reserved1;          /* 00h */
272    U8                      MsgLength;          /* 02h */
273    U8                      Function;           /* 03h */
274    U16                     Reserved2;          /* 04h */
275    U8                      Reserved3;          /* 06h */
276    U8                      MsgFlags;           /* 07h */
277    U32                     MsgContext;         /* 08h */
278    U16                     MailboxStatus;      /* 0Ch */
279    U16                     IOCStatus;          /* 0Eh */
280    U32                     IOCLogInfo;         /* 10h */
281    U32                     Reserved4;          /* 14h */
282} MSG_MAILBOX_REPLY, MPI_POINTER PTR_MSG_MAILBOX_REPLY,
283  MailboxReply_t, MPI_POINTER pMailboxReply_t;
284
285#endif
286
287
288
289