if_bge.c revision 331722
1/*- 2 * Copyright (c) 2001 Wind River Systems 3 * Copyright (c) 1997, 1998, 1999, 2001 4 * Bill Paul <wpaul@windriver.com>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34#include <sys/cdefs.h> 35__FBSDID("$FreeBSD: stable/11/sys/dev/bge/if_bge.c 331722 2018-03-29 02:50:57Z eadler $"); 36 37/* 38 * Broadcom BCM57xx(x)/BCM590x NetXtreme and NetLink family Ethernet driver 39 * 40 * The Broadcom BCM5700 is based on technology originally developed by 41 * Alteon Networks as part of the Tigon I and Tigon II Gigabit Ethernet 42 * MAC chips. The BCM5700, sometimes referred to as the Tigon III, has 43 * two on-board MIPS R4000 CPUs and can have as much as 16MB of external 44 * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo 45 * frames, highly configurable RX filtering, and 16 RX and TX queues 46 * (which, along with RX filter rules, can be used for QOS applications). 47 * Other features, such as TCP segmentation, may be available as part 48 * of value-added firmware updates. Unlike the Tigon I and Tigon II, 49 * firmware images can be stored in hardware and need not be compiled 50 * into the driver. 51 * 52 * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will 53 * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus. 54 * 55 * The BCM5701 is a single-chip solution incorporating both the BCM5700 56 * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701 57 * does not support external SSRAM. 58 * 59 * Broadcom also produces a variation of the BCM5700 under the "Altima" 60 * brand name, which is functionally similar but lacks PCI-X support. 61 * 62 * Without external SSRAM, you can only have at most 4 TX rings, 63 * and the use of the mini RX ring is disabled. This seems to imply 64 * that these features are simply not available on the BCM5701. As a 65 * result, this driver does not implement any support for the mini RX 66 * ring. 67 */ 68 69#ifdef HAVE_KERNEL_OPTION_HEADERS 70#include "opt_device_polling.h" 71#endif 72 73#include <sys/param.h> 74#include <sys/endian.h> 75#include <sys/systm.h> 76#include <sys/sockio.h> 77#include <sys/mbuf.h> 78#include <sys/malloc.h> 79#include <sys/kernel.h> 80#include <sys/module.h> 81#include <sys/socket.h> 82#include <sys/sysctl.h> 83#include <sys/taskqueue.h> 84 85#include <net/if.h> 86#include <net/if_var.h> 87#include <net/if_arp.h> 88#include <net/ethernet.h> 89#include <net/if_dl.h> 90#include <net/if_media.h> 91 92#include <net/bpf.h> 93 94#include <net/if_types.h> 95#include <net/if_vlan_var.h> 96 97#include <netinet/in_systm.h> 98#include <netinet/in.h> 99#include <netinet/ip.h> 100#include <netinet/tcp.h> 101 102#include <machine/bus.h> 103#include <machine/resource.h> 104#include <sys/bus.h> 105#include <sys/rman.h> 106 107#include <dev/mii/mii.h> 108#include <dev/mii/miivar.h> 109#include "miidevs.h" 110#include <dev/mii/brgphyreg.h> 111 112#ifdef __sparc64__ 113#include <dev/ofw/ofw_bus.h> 114#include <dev/ofw/openfirm.h> 115#include <machine/ofw_machdep.h> 116#include <machine/ver.h> 117#endif 118 119#include <dev/pci/pcireg.h> 120#include <dev/pci/pcivar.h> 121 122#include <dev/bge/if_bgereg.h> 123 124#define BGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP) 125#define ETHER_MIN_NOPAD (ETHER_MIN_LEN - ETHER_CRC_LEN) /* i.e., 60 */ 126 127MODULE_DEPEND(bge, pci, 1, 1, 1); 128MODULE_DEPEND(bge, ether, 1, 1, 1); 129MODULE_DEPEND(bge, miibus, 1, 1, 1); 130 131/* "device miibus" required. See GENERIC if you get errors here. */ 132#include "miibus_if.h" 133 134/* 135 * Various supported device vendors/types and their names. Note: the 136 * spec seems to indicate that the hardware still has Alteon's vendor 137 * ID burned into it, though it will always be overriden by the vendor 138 * ID in the EEPROM. Just to be safe, we cover all possibilities. 139 */ 140static const struct bge_type { 141 uint16_t bge_vid; 142 uint16_t bge_did; 143} bge_devs[] = { 144 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5700 }, 145 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5701 }, 146 147 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1000 }, 148 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1002 }, 149 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC9100 }, 150 151 { APPLE_VENDORID, APPLE_DEVICE_BCM5701 }, 152 153 { BCOM_VENDORID, BCOM_DEVICEID_BCM5700 }, 154 { BCOM_VENDORID, BCOM_DEVICEID_BCM5701 }, 155 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702 }, 156 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702_ALT }, 157 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702X }, 158 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703 }, 159 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703_ALT }, 160 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703X }, 161 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704C }, 162 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S }, 163 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S_ALT }, 164 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705 }, 165 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705F }, 166 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705K }, 167 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M }, 168 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M_ALT }, 169 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714C }, 170 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714S }, 171 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715 }, 172 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715S }, 173 { BCOM_VENDORID, BCOM_DEVICEID_BCM5717 }, 174 { BCOM_VENDORID, BCOM_DEVICEID_BCM5717C }, 175 { BCOM_VENDORID, BCOM_DEVICEID_BCM5718 }, 176 { BCOM_VENDORID, BCOM_DEVICEID_BCM5719 }, 177 { BCOM_VENDORID, BCOM_DEVICEID_BCM5720 }, 178 { BCOM_VENDORID, BCOM_DEVICEID_BCM5721 }, 179 { BCOM_VENDORID, BCOM_DEVICEID_BCM5722 }, 180 { BCOM_VENDORID, BCOM_DEVICEID_BCM5723 }, 181 { BCOM_VENDORID, BCOM_DEVICEID_BCM5725 }, 182 { BCOM_VENDORID, BCOM_DEVICEID_BCM5727 }, 183 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750 }, 184 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750M }, 185 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751 }, 186 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751F }, 187 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751M }, 188 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752 }, 189 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752M }, 190 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753 }, 191 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753F }, 192 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753M }, 193 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754 }, 194 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754M }, 195 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755 }, 196 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755M }, 197 { BCOM_VENDORID, BCOM_DEVICEID_BCM5756 }, 198 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761 }, 199 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761E }, 200 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761S }, 201 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761SE }, 202 { BCOM_VENDORID, BCOM_DEVICEID_BCM5762 }, 203 { BCOM_VENDORID, BCOM_DEVICEID_BCM5764 }, 204 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780 }, 205 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780S }, 206 { BCOM_VENDORID, BCOM_DEVICEID_BCM5781 }, 207 { BCOM_VENDORID, BCOM_DEVICEID_BCM5782 }, 208 { BCOM_VENDORID, BCOM_DEVICEID_BCM5784 }, 209 { BCOM_VENDORID, BCOM_DEVICEID_BCM5785F }, 210 { BCOM_VENDORID, BCOM_DEVICEID_BCM5785G }, 211 { BCOM_VENDORID, BCOM_DEVICEID_BCM5786 }, 212 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787 }, 213 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787F }, 214 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787M }, 215 { BCOM_VENDORID, BCOM_DEVICEID_BCM5788 }, 216 { BCOM_VENDORID, BCOM_DEVICEID_BCM5789 }, 217 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901 }, 218 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901A2 }, 219 { BCOM_VENDORID, BCOM_DEVICEID_BCM5903M }, 220 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906 }, 221 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906M }, 222 { BCOM_VENDORID, BCOM_DEVICEID_BCM57760 }, 223 { BCOM_VENDORID, BCOM_DEVICEID_BCM57761 }, 224 { BCOM_VENDORID, BCOM_DEVICEID_BCM57762 }, 225 { BCOM_VENDORID, BCOM_DEVICEID_BCM57764 }, 226 { BCOM_VENDORID, BCOM_DEVICEID_BCM57765 }, 227 { BCOM_VENDORID, BCOM_DEVICEID_BCM57766 }, 228 { BCOM_VENDORID, BCOM_DEVICEID_BCM57767 }, 229 { BCOM_VENDORID, BCOM_DEVICEID_BCM57780 }, 230 { BCOM_VENDORID, BCOM_DEVICEID_BCM57781 }, 231 { BCOM_VENDORID, BCOM_DEVICEID_BCM57782 }, 232 { BCOM_VENDORID, BCOM_DEVICEID_BCM57785 }, 233 { BCOM_VENDORID, BCOM_DEVICEID_BCM57786 }, 234 { BCOM_VENDORID, BCOM_DEVICEID_BCM57787 }, 235 { BCOM_VENDORID, BCOM_DEVICEID_BCM57788 }, 236 { BCOM_VENDORID, BCOM_DEVICEID_BCM57790 }, 237 { BCOM_VENDORID, BCOM_DEVICEID_BCM57791 }, 238 { BCOM_VENDORID, BCOM_DEVICEID_BCM57795 }, 239 240 { SK_VENDORID, SK_DEVICEID_ALTIMA }, 241 242 { TC_VENDORID, TC_DEVICEID_3C996 }, 243 244 { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE4 }, 245 { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE5 }, 246 { FJTSU_VENDORID, FJTSU_DEVICEID_PP250450 }, 247 248 { 0, 0 } 249}; 250 251static const struct bge_vendor { 252 uint16_t v_id; 253 const char *v_name; 254} bge_vendors[] = { 255 { ALTEON_VENDORID, "Alteon" }, 256 { ALTIMA_VENDORID, "Altima" }, 257 { APPLE_VENDORID, "Apple" }, 258 { BCOM_VENDORID, "Broadcom" }, 259 { SK_VENDORID, "SysKonnect" }, 260 { TC_VENDORID, "3Com" }, 261 { FJTSU_VENDORID, "Fujitsu" }, 262 263 { 0, NULL } 264}; 265 266static const struct bge_revision { 267 uint32_t br_chipid; 268 const char *br_name; 269} bge_revisions[] = { 270 { BGE_CHIPID_BCM5700_A0, "BCM5700 A0" }, 271 { BGE_CHIPID_BCM5700_A1, "BCM5700 A1" }, 272 { BGE_CHIPID_BCM5700_B0, "BCM5700 B0" }, 273 { BGE_CHIPID_BCM5700_B1, "BCM5700 B1" }, 274 { BGE_CHIPID_BCM5700_B2, "BCM5700 B2" }, 275 { BGE_CHIPID_BCM5700_B3, "BCM5700 B3" }, 276 { BGE_CHIPID_BCM5700_ALTIMA, "BCM5700 Altima" }, 277 { BGE_CHIPID_BCM5700_C0, "BCM5700 C0" }, 278 { BGE_CHIPID_BCM5701_A0, "BCM5701 A0" }, 279 { BGE_CHIPID_BCM5701_B0, "BCM5701 B0" }, 280 { BGE_CHIPID_BCM5701_B2, "BCM5701 B2" }, 281 { BGE_CHIPID_BCM5701_B5, "BCM5701 B5" }, 282 { BGE_CHIPID_BCM5703_A0, "BCM5703 A0" }, 283 { BGE_CHIPID_BCM5703_A1, "BCM5703 A1" }, 284 { BGE_CHIPID_BCM5703_A2, "BCM5703 A2" }, 285 { BGE_CHIPID_BCM5703_A3, "BCM5703 A3" }, 286 { BGE_CHIPID_BCM5703_B0, "BCM5703 B0" }, 287 { BGE_CHIPID_BCM5704_A0, "BCM5704 A0" }, 288 { BGE_CHIPID_BCM5704_A1, "BCM5704 A1" }, 289 { BGE_CHIPID_BCM5704_A2, "BCM5704 A2" }, 290 { BGE_CHIPID_BCM5704_A3, "BCM5704 A3" }, 291 { BGE_CHIPID_BCM5704_B0, "BCM5704 B0" }, 292 { BGE_CHIPID_BCM5705_A0, "BCM5705 A0" }, 293 { BGE_CHIPID_BCM5705_A1, "BCM5705 A1" }, 294 { BGE_CHIPID_BCM5705_A2, "BCM5705 A2" }, 295 { BGE_CHIPID_BCM5705_A3, "BCM5705 A3" }, 296 { BGE_CHIPID_BCM5750_A0, "BCM5750 A0" }, 297 { BGE_CHIPID_BCM5750_A1, "BCM5750 A1" }, 298 { BGE_CHIPID_BCM5750_A3, "BCM5750 A3" }, 299 { BGE_CHIPID_BCM5750_B0, "BCM5750 B0" }, 300 { BGE_CHIPID_BCM5750_B1, "BCM5750 B1" }, 301 { BGE_CHIPID_BCM5750_C0, "BCM5750 C0" }, 302 { BGE_CHIPID_BCM5750_C1, "BCM5750 C1" }, 303 { BGE_CHIPID_BCM5750_C2, "BCM5750 C2" }, 304 { BGE_CHIPID_BCM5714_A0, "BCM5714 A0" }, 305 { BGE_CHIPID_BCM5752_A0, "BCM5752 A0" }, 306 { BGE_CHIPID_BCM5752_A1, "BCM5752 A1" }, 307 { BGE_CHIPID_BCM5752_A2, "BCM5752 A2" }, 308 { BGE_CHIPID_BCM5714_B0, "BCM5714 B0" }, 309 { BGE_CHIPID_BCM5714_B3, "BCM5714 B3" }, 310 { BGE_CHIPID_BCM5715_A0, "BCM5715 A0" }, 311 { BGE_CHIPID_BCM5715_A1, "BCM5715 A1" }, 312 { BGE_CHIPID_BCM5715_A3, "BCM5715 A3" }, 313 { BGE_CHIPID_BCM5717_A0, "BCM5717 A0" }, 314 { BGE_CHIPID_BCM5717_B0, "BCM5717 B0" }, 315 { BGE_CHIPID_BCM5717_C0, "BCM5717 C0" }, 316 { BGE_CHIPID_BCM5719_A0, "BCM5719 A0" }, 317 { BGE_CHIPID_BCM5720_A0, "BCM5720 A0" }, 318 { BGE_CHIPID_BCM5755_A0, "BCM5755 A0" }, 319 { BGE_CHIPID_BCM5755_A1, "BCM5755 A1" }, 320 { BGE_CHIPID_BCM5755_A2, "BCM5755 A2" }, 321 { BGE_CHIPID_BCM5722_A0, "BCM5722 A0" }, 322 { BGE_CHIPID_BCM5761_A0, "BCM5761 A0" }, 323 { BGE_CHIPID_BCM5761_A1, "BCM5761 A1" }, 324 { BGE_CHIPID_BCM5762_A0, "BCM5762 A0" }, 325 { BGE_CHIPID_BCM5784_A0, "BCM5784 A0" }, 326 { BGE_CHIPID_BCM5784_A1, "BCM5784 A1" }, 327 /* 5754 and 5787 share the same ASIC ID */ 328 { BGE_CHIPID_BCM5787_A0, "BCM5754/5787 A0" }, 329 { BGE_CHIPID_BCM5787_A1, "BCM5754/5787 A1" }, 330 { BGE_CHIPID_BCM5787_A2, "BCM5754/5787 A2" }, 331 { BGE_CHIPID_BCM5906_A1, "BCM5906 A1" }, 332 { BGE_CHIPID_BCM5906_A2, "BCM5906 A2" }, 333 { BGE_CHIPID_BCM57765_A0, "BCM57765 A0" }, 334 { BGE_CHIPID_BCM57765_B0, "BCM57765 B0" }, 335 { BGE_CHIPID_BCM57780_A0, "BCM57780 A0" }, 336 { BGE_CHIPID_BCM57780_A1, "BCM57780 A1" }, 337 338 { 0, NULL } 339}; 340 341/* 342 * Some defaults for major revisions, so that newer steppings 343 * that we don't know about have a shot at working. 344 */ 345static const struct bge_revision bge_majorrevs[] = { 346 { BGE_ASICREV_BCM5700, "unknown BCM5700" }, 347 { BGE_ASICREV_BCM5701, "unknown BCM5701" }, 348 { BGE_ASICREV_BCM5703, "unknown BCM5703" }, 349 { BGE_ASICREV_BCM5704, "unknown BCM5704" }, 350 { BGE_ASICREV_BCM5705, "unknown BCM5705" }, 351 { BGE_ASICREV_BCM5750, "unknown BCM5750" }, 352 { BGE_ASICREV_BCM5714_A0, "unknown BCM5714" }, 353 { BGE_ASICREV_BCM5752, "unknown BCM5752" }, 354 { BGE_ASICREV_BCM5780, "unknown BCM5780" }, 355 { BGE_ASICREV_BCM5714, "unknown BCM5714" }, 356 { BGE_ASICREV_BCM5755, "unknown BCM5755" }, 357 { BGE_ASICREV_BCM5761, "unknown BCM5761" }, 358 { BGE_ASICREV_BCM5784, "unknown BCM5784" }, 359 { BGE_ASICREV_BCM5785, "unknown BCM5785" }, 360 /* 5754 and 5787 share the same ASIC ID */ 361 { BGE_ASICREV_BCM5787, "unknown BCM5754/5787" }, 362 { BGE_ASICREV_BCM5906, "unknown BCM5906" }, 363 { BGE_ASICREV_BCM57765, "unknown BCM57765" }, 364 { BGE_ASICREV_BCM57766, "unknown BCM57766" }, 365 { BGE_ASICREV_BCM57780, "unknown BCM57780" }, 366 { BGE_ASICREV_BCM5717, "unknown BCM5717" }, 367 { BGE_ASICREV_BCM5719, "unknown BCM5719" }, 368 { BGE_ASICREV_BCM5720, "unknown BCM5720" }, 369 { BGE_ASICREV_BCM5762, "unknown BCM5762" }, 370 371 { 0, NULL } 372}; 373 374#define BGE_IS_JUMBO_CAPABLE(sc) ((sc)->bge_flags & BGE_FLAG_JUMBO) 375#define BGE_IS_5700_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5700_FAMILY) 376#define BGE_IS_5705_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5705_PLUS) 377#define BGE_IS_5714_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5714_FAMILY) 378#define BGE_IS_575X_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_575X_PLUS) 379#define BGE_IS_5755_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5755_PLUS) 380#define BGE_IS_5717_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5717_PLUS) 381#define BGE_IS_57765_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_57765_PLUS) 382 383static uint32_t bge_chipid(device_t); 384static const struct bge_vendor * bge_lookup_vendor(uint16_t); 385static const struct bge_revision * bge_lookup_rev(uint32_t); 386 387typedef int (*bge_eaddr_fcn_t)(struct bge_softc *, uint8_t[]); 388 389static int bge_probe(device_t); 390static int bge_attach(device_t); 391static int bge_detach(device_t); 392static int bge_suspend(device_t); 393static int bge_resume(device_t); 394static void bge_release_resources(struct bge_softc *); 395static void bge_dma_map_addr(void *, bus_dma_segment_t *, int, int); 396static int bge_dma_alloc(struct bge_softc *); 397static void bge_dma_free(struct bge_softc *); 398static int bge_dma_ring_alloc(struct bge_softc *, bus_size_t, bus_size_t, 399 bus_dma_tag_t *, uint8_t **, bus_dmamap_t *, bus_addr_t *, const char *); 400 401static void bge_devinfo(struct bge_softc *); 402static int bge_mbox_reorder(struct bge_softc *); 403 404static int bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]); 405static int bge_get_eaddr_mem(struct bge_softc *, uint8_t[]); 406static int bge_get_eaddr_nvram(struct bge_softc *, uint8_t[]); 407static int bge_get_eaddr_eeprom(struct bge_softc *, uint8_t[]); 408static int bge_get_eaddr(struct bge_softc *, uint8_t[]); 409 410static void bge_txeof(struct bge_softc *, uint16_t); 411static void bge_rxcsum(struct bge_softc *, struct bge_rx_bd *, struct mbuf *); 412static int bge_rxeof(struct bge_softc *, uint16_t, int); 413 414static void bge_asf_driver_up (struct bge_softc *); 415static void bge_tick(void *); 416static void bge_stats_clear_regs(struct bge_softc *); 417static void bge_stats_update(struct bge_softc *); 418static void bge_stats_update_regs(struct bge_softc *); 419static struct mbuf *bge_check_short_dma(struct mbuf *); 420static struct mbuf *bge_setup_tso(struct bge_softc *, struct mbuf *, 421 uint16_t *, uint16_t *); 422static int bge_encap(struct bge_softc *, struct mbuf **, uint32_t *); 423 424static void bge_intr(void *); 425static int bge_msi_intr(void *); 426static void bge_intr_task(void *, int); 427static void bge_start_locked(if_t); 428static void bge_start(if_t); 429static int bge_ioctl(if_t, u_long, caddr_t); 430static void bge_init_locked(struct bge_softc *); 431static void bge_init(void *); 432static void bge_stop_block(struct bge_softc *, bus_size_t, uint32_t); 433static void bge_stop(struct bge_softc *); 434static void bge_watchdog(struct bge_softc *); 435static int bge_shutdown(device_t); 436static int bge_ifmedia_upd_locked(if_t); 437static int bge_ifmedia_upd(if_t); 438static void bge_ifmedia_sts(if_t, struct ifmediareq *); 439static uint64_t bge_get_counter(if_t, ift_counter); 440 441static uint8_t bge_nvram_getbyte(struct bge_softc *, int, uint8_t *); 442static int bge_read_nvram(struct bge_softc *, caddr_t, int, int); 443 444static uint8_t bge_eeprom_getbyte(struct bge_softc *, int, uint8_t *); 445static int bge_read_eeprom(struct bge_softc *, caddr_t, int, int); 446 447static void bge_setpromisc(struct bge_softc *); 448static void bge_setmulti(struct bge_softc *); 449static void bge_setvlan(struct bge_softc *); 450 451static __inline void bge_rxreuse_std(struct bge_softc *, int); 452static __inline void bge_rxreuse_jumbo(struct bge_softc *, int); 453static int bge_newbuf_std(struct bge_softc *, int); 454static int bge_newbuf_jumbo(struct bge_softc *, int); 455static int bge_init_rx_ring_std(struct bge_softc *); 456static void bge_free_rx_ring_std(struct bge_softc *); 457static int bge_init_rx_ring_jumbo(struct bge_softc *); 458static void bge_free_rx_ring_jumbo(struct bge_softc *); 459static void bge_free_tx_ring(struct bge_softc *); 460static int bge_init_tx_ring(struct bge_softc *); 461 462static int bge_chipinit(struct bge_softc *); 463static int bge_blockinit(struct bge_softc *); 464static uint32_t bge_dma_swap_options(struct bge_softc *); 465 466static int bge_has_eaddr(struct bge_softc *); 467static uint32_t bge_readmem_ind(struct bge_softc *, int); 468static void bge_writemem_ind(struct bge_softc *, int, int); 469static void bge_writembx(struct bge_softc *, int, int); 470#ifdef notdef 471static uint32_t bge_readreg_ind(struct bge_softc *, int); 472#endif 473static void bge_writemem_direct(struct bge_softc *, int, int); 474static void bge_writereg_ind(struct bge_softc *, int, int); 475 476static int bge_miibus_readreg(device_t, int, int); 477static int bge_miibus_writereg(device_t, int, int, int); 478static void bge_miibus_statchg(device_t); 479#ifdef DEVICE_POLLING 480static int bge_poll(if_t ifp, enum poll_cmd cmd, int count); 481#endif 482 483#define BGE_RESET_SHUTDOWN 0 484#define BGE_RESET_START 1 485#define BGE_RESET_SUSPEND 2 486static void bge_sig_post_reset(struct bge_softc *, int); 487static void bge_sig_legacy(struct bge_softc *, int); 488static void bge_sig_pre_reset(struct bge_softc *, int); 489static void bge_stop_fw(struct bge_softc *); 490static int bge_reset(struct bge_softc *); 491static void bge_link_upd(struct bge_softc *); 492 493static void bge_ape_lock_init(struct bge_softc *); 494static void bge_ape_read_fw_ver(struct bge_softc *); 495static int bge_ape_lock(struct bge_softc *, int); 496static void bge_ape_unlock(struct bge_softc *, int); 497static void bge_ape_send_event(struct bge_softc *, uint32_t); 498static void bge_ape_driver_state_change(struct bge_softc *, int); 499 500/* 501 * The BGE_REGISTER_DEBUG option is only for low-level debugging. It may 502 * leak information to untrusted users. It is also known to cause alignment 503 * traps on certain architectures. 504 */ 505#ifdef BGE_REGISTER_DEBUG 506static int bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS); 507static int bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS); 508static int bge_sysctl_ape_read(SYSCTL_HANDLER_ARGS); 509static int bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS); 510#endif 511static void bge_add_sysctls(struct bge_softc *); 512static void bge_add_sysctl_stats_regs(struct bge_softc *, 513 struct sysctl_ctx_list *, struct sysctl_oid_list *); 514static void bge_add_sysctl_stats(struct bge_softc *, struct sysctl_ctx_list *, 515 struct sysctl_oid_list *); 516static int bge_sysctl_stats(SYSCTL_HANDLER_ARGS); 517 518static device_method_t bge_methods[] = { 519 /* Device interface */ 520 DEVMETHOD(device_probe, bge_probe), 521 DEVMETHOD(device_attach, bge_attach), 522 DEVMETHOD(device_detach, bge_detach), 523 DEVMETHOD(device_shutdown, bge_shutdown), 524 DEVMETHOD(device_suspend, bge_suspend), 525 DEVMETHOD(device_resume, bge_resume), 526 527 /* MII interface */ 528 DEVMETHOD(miibus_readreg, bge_miibus_readreg), 529 DEVMETHOD(miibus_writereg, bge_miibus_writereg), 530 DEVMETHOD(miibus_statchg, bge_miibus_statchg), 531 532 DEVMETHOD_END 533}; 534 535static driver_t bge_driver = { 536 "bge", 537 bge_methods, 538 sizeof(struct bge_softc) 539}; 540 541static devclass_t bge_devclass; 542 543DRIVER_MODULE(bge, pci, bge_driver, bge_devclass, 0, 0); 544DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0); 545 546static int bge_allow_asf = 1; 547 548static SYSCTL_NODE(_hw, OID_AUTO, bge, CTLFLAG_RD, 0, "BGE driver parameters"); 549SYSCTL_INT(_hw_bge, OID_AUTO, allow_asf, CTLFLAG_RDTUN, &bge_allow_asf, 0, 550 "Allow ASF mode if available"); 551 552#define SPARC64_BLADE_1500_MODEL "SUNW,Sun-Blade-1500" 553#define SPARC64_BLADE_1500_PATH_BGE "/pci@1f,700000/network@2" 554#define SPARC64_BLADE_2500_MODEL "SUNW,Sun-Blade-2500" 555#define SPARC64_BLADE_2500_PATH_BGE "/pci@1c,600000/network@3" 556#define SPARC64_OFW_SUBVENDOR "subsystem-vendor-id" 557 558static int 559bge_has_eaddr(struct bge_softc *sc) 560{ 561#ifdef __sparc64__ 562 char buf[sizeof(SPARC64_BLADE_1500_PATH_BGE)]; 563 device_t dev; 564 uint32_t subvendor; 565 566 dev = sc->bge_dev; 567 568 /* 569 * The on-board BGEs found in sun4u machines aren't fitted with 570 * an EEPROM which means that we have to obtain the MAC address 571 * via OFW and that some tests will always fail. We distinguish 572 * such BGEs by the subvendor ID, which also has to be obtained 573 * from OFW instead of the PCI configuration space as the latter 574 * indicates Broadcom as the subvendor of the netboot interface. 575 * For early Blade 1500 and 2500 we even have to check the OFW 576 * device path as the subvendor ID always defaults to Broadcom 577 * there. 578 */ 579 if (OF_getprop(ofw_bus_get_node(dev), SPARC64_OFW_SUBVENDOR, 580 &subvendor, sizeof(subvendor)) == sizeof(subvendor) && 581 (subvendor == FJTSU_VENDORID || subvendor == SUN_VENDORID)) 582 return (0); 583 memset(buf, 0, sizeof(buf)); 584 if (OF_package_to_path(ofw_bus_get_node(dev), buf, sizeof(buf)) > 0) { 585 if (strcmp(sparc64_model, SPARC64_BLADE_1500_MODEL) == 0 && 586 strcmp(buf, SPARC64_BLADE_1500_PATH_BGE) == 0) 587 return (0); 588 if (strcmp(sparc64_model, SPARC64_BLADE_2500_MODEL) == 0 && 589 strcmp(buf, SPARC64_BLADE_2500_PATH_BGE) == 0) 590 return (0); 591 } 592#endif 593 return (1); 594} 595 596static uint32_t 597bge_readmem_ind(struct bge_softc *sc, int off) 598{ 599 device_t dev; 600 uint32_t val; 601 602 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 603 off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4) 604 return (0); 605 606 dev = sc->bge_dev; 607 608 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 609 val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4); 610 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 611 return (val); 612} 613 614static void 615bge_writemem_ind(struct bge_softc *sc, int off, int val) 616{ 617 device_t dev; 618 619 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 620 off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4) 621 return; 622 623 dev = sc->bge_dev; 624 625 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 626 pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4); 627 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 628} 629 630#ifdef notdef 631static uint32_t 632bge_readreg_ind(struct bge_softc *sc, int off) 633{ 634 device_t dev; 635 636 dev = sc->bge_dev; 637 638 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 639 return (pci_read_config(dev, BGE_PCI_REG_DATA, 4)); 640} 641#endif 642 643static void 644bge_writereg_ind(struct bge_softc *sc, int off, int val) 645{ 646 device_t dev; 647 648 dev = sc->bge_dev; 649 650 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 651 pci_write_config(dev, BGE_PCI_REG_DATA, val, 4); 652} 653 654static void 655bge_writemem_direct(struct bge_softc *sc, int off, int val) 656{ 657 CSR_WRITE_4(sc, off, val); 658} 659 660static void 661bge_writembx(struct bge_softc *sc, int off, int val) 662{ 663 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 664 off += BGE_LPMBX_IRQ0_HI - BGE_MBX_IRQ0_HI; 665 666 CSR_WRITE_4(sc, off, val); 667 if ((sc->bge_flags & BGE_FLAG_MBOX_REORDER) != 0) 668 CSR_READ_4(sc, off); 669} 670 671/* 672 * Clear all stale locks and select the lock for this driver instance. 673 */ 674static void 675bge_ape_lock_init(struct bge_softc *sc) 676{ 677 uint32_t bit, regbase; 678 int i; 679 680 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 681 regbase = BGE_APE_LOCK_GRANT; 682 else 683 regbase = BGE_APE_PER_LOCK_GRANT; 684 685 /* Clear any stale locks. */ 686 for (i = BGE_APE_LOCK_PHY0; i <= BGE_APE_LOCK_GPIO; i++) { 687 switch (i) { 688 case BGE_APE_LOCK_PHY0: 689 case BGE_APE_LOCK_PHY1: 690 case BGE_APE_LOCK_PHY2: 691 case BGE_APE_LOCK_PHY3: 692 bit = BGE_APE_LOCK_GRANT_DRIVER0; 693 break; 694 default: 695 if (sc->bge_func_addr == 0) 696 bit = BGE_APE_LOCK_GRANT_DRIVER0; 697 else 698 bit = (1 << sc->bge_func_addr); 699 } 700 APE_WRITE_4(sc, regbase + 4 * i, bit); 701 } 702 703 /* Select the PHY lock based on the device's function number. */ 704 switch (sc->bge_func_addr) { 705 case 0: 706 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY0; 707 break; 708 case 1: 709 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY1; 710 break; 711 case 2: 712 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY2; 713 break; 714 case 3: 715 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY3; 716 break; 717 default: 718 device_printf(sc->bge_dev, 719 "PHY lock not supported on this function\n"); 720 } 721} 722 723/* 724 * Check for APE firmware, set flags, and print version info. 725 */ 726static void 727bge_ape_read_fw_ver(struct bge_softc *sc) 728{ 729 const char *fwtype; 730 uint32_t apedata, features; 731 732 /* Check for a valid APE signature in shared memory. */ 733 apedata = APE_READ_4(sc, BGE_APE_SEG_SIG); 734 if (apedata != BGE_APE_SEG_SIG_MAGIC) { 735 sc->bge_mfw_flags &= ~ BGE_MFW_ON_APE; 736 return; 737 } 738 739 /* Check if APE firmware is running. */ 740 apedata = APE_READ_4(sc, BGE_APE_FW_STATUS); 741 if ((apedata & BGE_APE_FW_STATUS_READY) == 0) { 742 device_printf(sc->bge_dev, "APE signature found " 743 "but FW status not ready! 0x%08x\n", apedata); 744 return; 745 } 746 747 sc->bge_mfw_flags |= BGE_MFW_ON_APE; 748 749 /* Fetch the APE firwmare type and version. */ 750 apedata = APE_READ_4(sc, BGE_APE_FW_VERSION); 751 features = APE_READ_4(sc, BGE_APE_FW_FEATURES); 752 if ((features & BGE_APE_FW_FEATURE_NCSI) != 0) { 753 sc->bge_mfw_flags |= BGE_MFW_TYPE_NCSI; 754 fwtype = "NCSI"; 755 } else if ((features & BGE_APE_FW_FEATURE_DASH) != 0) { 756 sc->bge_mfw_flags |= BGE_MFW_TYPE_DASH; 757 fwtype = "DASH"; 758 } else 759 fwtype = "UNKN"; 760 761 /* Print the APE firmware version. */ 762 device_printf(sc->bge_dev, "APE FW version: %s v%d.%d.%d.%d\n", 763 fwtype, 764 (apedata & BGE_APE_FW_VERSION_MAJMSK) >> BGE_APE_FW_VERSION_MAJSFT, 765 (apedata & BGE_APE_FW_VERSION_MINMSK) >> BGE_APE_FW_VERSION_MINSFT, 766 (apedata & BGE_APE_FW_VERSION_REVMSK) >> BGE_APE_FW_VERSION_REVSFT, 767 (apedata & BGE_APE_FW_VERSION_BLDMSK)); 768} 769 770static int 771bge_ape_lock(struct bge_softc *sc, int locknum) 772{ 773 uint32_t bit, gnt, req, status; 774 int i, off; 775 776 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 777 return (0); 778 779 /* Lock request/grant registers have different bases. */ 780 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) { 781 req = BGE_APE_LOCK_REQ; 782 gnt = BGE_APE_LOCK_GRANT; 783 } else { 784 req = BGE_APE_PER_LOCK_REQ; 785 gnt = BGE_APE_PER_LOCK_GRANT; 786 } 787 788 off = 4 * locknum; 789 790 switch (locknum) { 791 case BGE_APE_LOCK_GPIO: 792 /* Lock required when using GPIO. */ 793 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 794 return (0); 795 if (sc->bge_func_addr == 0) 796 bit = BGE_APE_LOCK_REQ_DRIVER0; 797 else 798 bit = (1 << sc->bge_func_addr); 799 break; 800 case BGE_APE_LOCK_GRC: 801 /* Lock required to reset the device. */ 802 if (sc->bge_func_addr == 0) 803 bit = BGE_APE_LOCK_REQ_DRIVER0; 804 else 805 bit = (1 << sc->bge_func_addr); 806 break; 807 case BGE_APE_LOCK_MEM: 808 /* Lock required when accessing certain APE memory. */ 809 if (sc->bge_func_addr == 0) 810 bit = BGE_APE_LOCK_REQ_DRIVER0; 811 else 812 bit = (1 << sc->bge_func_addr); 813 break; 814 case BGE_APE_LOCK_PHY0: 815 case BGE_APE_LOCK_PHY1: 816 case BGE_APE_LOCK_PHY2: 817 case BGE_APE_LOCK_PHY3: 818 /* Lock required when accessing PHYs. */ 819 bit = BGE_APE_LOCK_REQ_DRIVER0; 820 break; 821 default: 822 return (EINVAL); 823 } 824 825 /* Request a lock. */ 826 APE_WRITE_4(sc, req + off, bit); 827 828 /* Wait up to 1 second to acquire lock. */ 829 for (i = 0; i < 20000; i++) { 830 status = APE_READ_4(sc, gnt + off); 831 if (status == bit) 832 break; 833 DELAY(50); 834 } 835 836 /* Handle any errors. */ 837 if (status != bit) { 838 device_printf(sc->bge_dev, "APE lock %d request failed! " 839 "request = 0x%04x[0x%04x], status = 0x%04x[0x%04x]\n", 840 locknum, req + off, bit & 0xFFFF, gnt + off, 841 status & 0xFFFF); 842 /* Revoke the lock request. */ 843 APE_WRITE_4(sc, gnt + off, bit); 844 return (EBUSY); 845 } 846 847 return (0); 848} 849 850static void 851bge_ape_unlock(struct bge_softc *sc, int locknum) 852{ 853 uint32_t bit, gnt; 854 int off; 855 856 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 857 return; 858 859 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 860 gnt = BGE_APE_LOCK_GRANT; 861 else 862 gnt = BGE_APE_PER_LOCK_GRANT; 863 864 off = 4 * locknum; 865 866 switch (locknum) { 867 case BGE_APE_LOCK_GPIO: 868 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 869 return; 870 if (sc->bge_func_addr == 0) 871 bit = BGE_APE_LOCK_GRANT_DRIVER0; 872 else 873 bit = (1 << sc->bge_func_addr); 874 break; 875 case BGE_APE_LOCK_GRC: 876 if (sc->bge_func_addr == 0) 877 bit = BGE_APE_LOCK_GRANT_DRIVER0; 878 else 879 bit = (1 << sc->bge_func_addr); 880 break; 881 case BGE_APE_LOCK_MEM: 882 if (sc->bge_func_addr == 0) 883 bit = BGE_APE_LOCK_GRANT_DRIVER0; 884 else 885 bit = (1 << sc->bge_func_addr); 886 break; 887 case BGE_APE_LOCK_PHY0: 888 case BGE_APE_LOCK_PHY1: 889 case BGE_APE_LOCK_PHY2: 890 case BGE_APE_LOCK_PHY3: 891 bit = BGE_APE_LOCK_GRANT_DRIVER0; 892 break; 893 default: 894 return; 895 } 896 897 APE_WRITE_4(sc, gnt + off, bit); 898} 899 900/* 901 * Send an event to the APE firmware. 902 */ 903static void 904bge_ape_send_event(struct bge_softc *sc, uint32_t event) 905{ 906 uint32_t apedata; 907 int i; 908 909 /* NCSI does not support APE events. */ 910 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 911 return; 912 913 /* Wait up to 1ms for APE to service previous event. */ 914 for (i = 10; i > 0; i--) { 915 if (bge_ape_lock(sc, BGE_APE_LOCK_MEM) != 0) 916 break; 917 apedata = APE_READ_4(sc, BGE_APE_EVENT_STATUS); 918 if ((apedata & BGE_APE_EVENT_STATUS_EVENT_PENDING) == 0) { 919 APE_WRITE_4(sc, BGE_APE_EVENT_STATUS, event | 920 BGE_APE_EVENT_STATUS_EVENT_PENDING); 921 bge_ape_unlock(sc, BGE_APE_LOCK_MEM); 922 APE_WRITE_4(sc, BGE_APE_EVENT, BGE_APE_EVENT_1); 923 break; 924 } 925 bge_ape_unlock(sc, BGE_APE_LOCK_MEM); 926 DELAY(100); 927 } 928 if (i == 0) 929 device_printf(sc->bge_dev, "APE event 0x%08x send timed out\n", 930 event); 931} 932 933static void 934bge_ape_driver_state_change(struct bge_softc *sc, int kind) 935{ 936 uint32_t apedata, event; 937 938 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 939 return; 940 941 switch (kind) { 942 case BGE_RESET_START: 943 /* If this is the first load, clear the load counter. */ 944 apedata = APE_READ_4(sc, BGE_APE_HOST_SEG_SIG); 945 if (apedata != BGE_APE_HOST_SEG_SIG_MAGIC) 946 APE_WRITE_4(sc, BGE_APE_HOST_INIT_COUNT, 0); 947 else { 948 apedata = APE_READ_4(sc, BGE_APE_HOST_INIT_COUNT); 949 APE_WRITE_4(sc, BGE_APE_HOST_INIT_COUNT, ++apedata); 950 } 951 APE_WRITE_4(sc, BGE_APE_HOST_SEG_SIG, 952 BGE_APE_HOST_SEG_SIG_MAGIC); 953 APE_WRITE_4(sc, BGE_APE_HOST_SEG_LEN, 954 BGE_APE_HOST_SEG_LEN_MAGIC); 955 956 /* Add some version info if bge(4) supports it. */ 957 APE_WRITE_4(sc, BGE_APE_HOST_DRIVER_ID, 958 BGE_APE_HOST_DRIVER_ID_MAGIC(1, 0)); 959 APE_WRITE_4(sc, BGE_APE_HOST_BEHAVIOR, 960 BGE_APE_HOST_BEHAV_NO_PHYLOCK); 961 APE_WRITE_4(sc, BGE_APE_HOST_HEARTBEAT_INT_MS, 962 BGE_APE_HOST_HEARTBEAT_INT_DISABLE); 963 APE_WRITE_4(sc, BGE_APE_HOST_DRVR_STATE, 964 BGE_APE_HOST_DRVR_STATE_START); 965 event = BGE_APE_EVENT_STATUS_STATE_START; 966 break; 967 case BGE_RESET_SHUTDOWN: 968 APE_WRITE_4(sc, BGE_APE_HOST_DRVR_STATE, 969 BGE_APE_HOST_DRVR_STATE_UNLOAD); 970 event = BGE_APE_EVENT_STATUS_STATE_UNLOAD; 971 break; 972 case BGE_RESET_SUSPEND: 973 event = BGE_APE_EVENT_STATUS_STATE_SUSPEND; 974 break; 975 default: 976 return; 977 } 978 979 bge_ape_send_event(sc, event | BGE_APE_EVENT_STATUS_DRIVER_EVNT | 980 BGE_APE_EVENT_STATUS_STATE_CHNGE); 981} 982 983/* 984 * Map a single buffer address. 985 */ 986 987static void 988bge_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 989{ 990 struct bge_dmamap_arg *ctx; 991 992 if (error) 993 return; 994 995 KASSERT(nseg == 1, ("%s: %d segments returned!", __func__, nseg)); 996 997 ctx = arg; 998 ctx->bge_busaddr = segs->ds_addr; 999} 1000 1001static uint8_t 1002bge_nvram_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 1003{ 1004 uint32_t access, byte = 0; 1005 int i; 1006 1007 /* Lock. */ 1008 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); 1009 for (i = 0; i < 8000; i++) { 1010 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1) 1011 break; 1012 DELAY(20); 1013 } 1014 if (i == 8000) 1015 return (1); 1016 1017 /* Enable access. */ 1018 access = CSR_READ_4(sc, BGE_NVRAM_ACCESS); 1019 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access | BGE_NVRAMACC_ENABLE); 1020 1021 CSR_WRITE_4(sc, BGE_NVRAM_ADDR, addr & 0xfffffffc); 1022 CSR_WRITE_4(sc, BGE_NVRAM_CMD, BGE_NVRAM_READCMD); 1023 for (i = 0; i < BGE_TIMEOUT * 10; i++) { 1024 DELAY(10); 1025 if (CSR_READ_4(sc, BGE_NVRAM_CMD) & BGE_NVRAMCMD_DONE) { 1026 DELAY(10); 1027 break; 1028 } 1029 } 1030 1031 if (i == BGE_TIMEOUT * 10) { 1032 if_printf(sc->bge_ifp, "nvram read timed out\n"); 1033 return (1); 1034 } 1035 1036 /* Get result. */ 1037 byte = CSR_READ_4(sc, BGE_NVRAM_RDDATA); 1038 1039 *dest = (bswap32(byte) >> ((addr % 4) * 8)) & 0xFF; 1040 1041 /* Disable access. */ 1042 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access); 1043 1044 /* Unlock. */ 1045 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_CLR1); 1046 CSR_READ_4(sc, BGE_NVRAM_SWARB); 1047 1048 return (0); 1049} 1050 1051/* 1052 * Read a sequence of bytes from NVRAM. 1053 */ 1054static int 1055bge_read_nvram(struct bge_softc *sc, caddr_t dest, int off, int cnt) 1056{ 1057 int err = 0, i; 1058 uint8_t byte = 0; 1059 1060 if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 1061 return (1); 1062 1063 for (i = 0; i < cnt; i++) { 1064 err = bge_nvram_getbyte(sc, off + i, &byte); 1065 if (err) 1066 break; 1067 *(dest + i) = byte; 1068 } 1069 1070 return (err ? 1 : 0); 1071} 1072 1073/* 1074 * Read a byte of data stored in the EEPROM at address 'addr.' The 1075 * BCM570x supports both the traditional bitbang interface and an 1076 * auto access interface for reading the EEPROM. We use the auto 1077 * access method. 1078 */ 1079static uint8_t 1080bge_eeprom_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 1081{ 1082 int i; 1083 uint32_t byte = 0; 1084 1085 /* 1086 * Enable use of auto EEPROM access so we can avoid 1087 * having to use the bitbang method. 1088 */ 1089 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM); 1090 1091 /* Reset the EEPROM, load the clock period. */ 1092 CSR_WRITE_4(sc, BGE_EE_ADDR, 1093 BGE_EEADDR_RESET | BGE_EEHALFCLK(BGE_HALFCLK_384SCL)); 1094 DELAY(20); 1095 1096 /* Issue the read EEPROM command. */ 1097 CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr); 1098 1099 /* Wait for completion */ 1100 for(i = 0; i < BGE_TIMEOUT * 10; i++) { 1101 DELAY(10); 1102 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE) 1103 break; 1104 } 1105 1106 if (i == BGE_TIMEOUT * 10) { 1107 device_printf(sc->bge_dev, "EEPROM read timed out\n"); 1108 return (1); 1109 } 1110 1111 /* Get result. */ 1112 byte = CSR_READ_4(sc, BGE_EE_DATA); 1113 1114 *dest = (byte >> ((addr % 4) * 8)) & 0xFF; 1115 1116 return (0); 1117} 1118 1119/* 1120 * Read a sequence of bytes from the EEPROM. 1121 */ 1122static int 1123bge_read_eeprom(struct bge_softc *sc, caddr_t dest, int off, int cnt) 1124{ 1125 int i, error = 0; 1126 uint8_t byte = 0; 1127 1128 for (i = 0; i < cnt; i++) { 1129 error = bge_eeprom_getbyte(sc, off + i, &byte); 1130 if (error) 1131 break; 1132 *(dest + i) = byte; 1133 } 1134 1135 return (error ? 1 : 0); 1136} 1137 1138static int 1139bge_miibus_readreg(device_t dev, int phy, int reg) 1140{ 1141 struct bge_softc *sc; 1142 uint32_t val; 1143 int i; 1144 1145 sc = device_get_softc(dev); 1146 1147 if (bge_ape_lock(sc, sc->bge_phy_ape_lock) != 0) 1148 return (0); 1149 1150 /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */ 1151 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1152 CSR_WRITE_4(sc, BGE_MI_MODE, 1153 sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL); 1154 DELAY(80); 1155 } 1156 1157 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ | BGE_MICOMM_BUSY | 1158 BGE_MIPHY(phy) | BGE_MIREG(reg)); 1159 1160 /* Poll for the PHY register access to complete. */ 1161 for (i = 0; i < BGE_TIMEOUT; i++) { 1162 DELAY(10); 1163 val = CSR_READ_4(sc, BGE_MI_COMM); 1164 if ((val & BGE_MICOMM_BUSY) == 0) { 1165 DELAY(5); 1166 val = CSR_READ_4(sc, BGE_MI_COMM); 1167 break; 1168 } 1169 } 1170 1171 if (i == BGE_TIMEOUT) { 1172 device_printf(sc->bge_dev, 1173 "PHY read timed out (phy %d, reg %d, val 0x%08x)\n", 1174 phy, reg, val); 1175 val = 0; 1176 } 1177 1178 /* Restore the autopoll bit if necessary. */ 1179 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1180 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); 1181 DELAY(80); 1182 } 1183 1184 bge_ape_unlock(sc, sc->bge_phy_ape_lock); 1185 1186 if (val & BGE_MICOMM_READFAIL) 1187 return (0); 1188 1189 return (val & 0xFFFF); 1190} 1191 1192static int 1193bge_miibus_writereg(device_t dev, int phy, int reg, int val) 1194{ 1195 struct bge_softc *sc; 1196 int i; 1197 1198 sc = device_get_softc(dev); 1199 1200 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 1201 (reg == BRGPHY_MII_1000CTL || reg == BRGPHY_MII_AUXCTL)) 1202 return (0); 1203 1204 if (bge_ape_lock(sc, sc->bge_phy_ape_lock) != 0) 1205 return (0); 1206 1207 /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */ 1208 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1209 CSR_WRITE_4(sc, BGE_MI_MODE, 1210 sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL); 1211 DELAY(80); 1212 } 1213 1214 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE | BGE_MICOMM_BUSY | 1215 BGE_MIPHY(phy) | BGE_MIREG(reg) | val); 1216 1217 for (i = 0; i < BGE_TIMEOUT; i++) { 1218 DELAY(10); 1219 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) { 1220 DELAY(5); 1221 CSR_READ_4(sc, BGE_MI_COMM); /* dummy read */ 1222 break; 1223 } 1224 } 1225 1226 /* Restore the autopoll bit if necessary. */ 1227 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1228 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); 1229 DELAY(80); 1230 } 1231 1232 bge_ape_unlock(sc, sc->bge_phy_ape_lock); 1233 1234 if (i == BGE_TIMEOUT) 1235 device_printf(sc->bge_dev, 1236 "PHY write timed out (phy %d, reg %d, val 0x%04x)\n", 1237 phy, reg, val); 1238 1239 return (0); 1240} 1241 1242static void 1243bge_miibus_statchg(device_t dev) 1244{ 1245 struct bge_softc *sc; 1246 struct mii_data *mii; 1247 uint32_t mac_mode, rx_mode, tx_mode; 1248 1249 sc = device_get_softc(dev); 1250 if ((if_getdrvflags(sc->bge_ifp) & IFF_DRV_RUNNING) == 0) 1251 return; 1252 mii = device_get_softc(sc->bge_miibus); 1253 1254 if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) == 1255 (IFM_ACTIVE | IFM_AVALID)) { 1256 switch (IFM_SUBTYPE(mii->mii_media_active)) { 1257 case IFM_10_T: 1258 case IFM_100_TX: 1259 sc->bge_link = 1; 1260 break; 1261 case IFM_1000_T: 1262 case IFM_1000_SX: 1263 case IFM_2500_SX: 1264 if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 1265 sc->bge_link = 1; 1266 else 1267 sc->bge_link = 0; 1268 break; 1269 default: 1270 sc->bge_link = 0; 1271 break; 1272 } 1273 } else 1274 sc->bge_link = 0; 1275 if (sc->bge_link == 0) 1276 return; 1277 1278 /* 1279 * APE firmware touches these registers to keep the MAC 1280 * connected to the outside world. Try to keep the 1281 * accesses atomic. 1282 */ 1283 1284 /* Set the port mode (MII/GMII) to match the link speed. */ 1285 mac_mode = CSR_READ_4(sc, BGE_MAC_MODE) & 1286 ~(BGE_MACMODE_PORTMODE | BGE_MACMODE_HALF_DUPLEX); 1287 tx_mode = CSR_READ_4(sc, BGE_TX_MODE); 1288 rx_mode = CSR_READ_4(sc, BGE_RX_MODE); 1289 1290 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T || 1291 IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) 1292 mac_mode |= BGE_PORTMODE_GMII; 1293 else 1294 mac_mode |= BGE_PORTMODE_MII; 1295 1296 /* Set MAC flow control behavior to match link flow control settings. */ 1297 tx_mode &= ~BGE_TXMODE_FLOWCTL_ENABLE; 1298 rx_mode &= ~BGE_RXMODE_FLOWCTL_ENABLE; 1299 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) { 1300 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE) != 0) 1301 tx_mode |= BGE_TXMODE_FLOWCTL_ENABLE; 1302 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE) != 0) 1303 rx_mode |= BGE_RXMODE_FLOWCTL_ENABLE; 1304 } else 1305 mac_mode |= BGE_MACMODE_HALF_DUPLEX; 1306 1307 CSR_WRITE_4(sc, BGE_MAC_MODE, mac_mode); 1308 DELAY(40); 1309 CSR_WRITE_4(sc, BGE_TX_MODE, tx_mode); 1310 CSR_WRITE_4(sc, BGE_RX_MODE, rx_mode); 1311} 1312 1313/* 1314 * Intialize a standard receive ring descriptor. 1315 */ 1316static int 1317bge_newbuf_std(struct bge_softc *sc, int i) 1318{ 1319 struct mbuf *m; 1320 struct bge_rx_bd *r; 1321 bus_dma_segment_t segs[1]; 1322 bus_dmamap_t map; 1323 int error, nsegs; 1324 1325 if (sc->bge_flags & BGE_FLAG_JUMBO_STD && 1326 (if_getmtu(sc->bge_ifp) + ETHER_HDR_LEN + ETHER_CRC_LEN + 1327 ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN))) { 1328 m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUM9BYTES); 1329 if (m == NULL) 1330 return (ENOBUFS); 1331 m->m_len = m->m_pkthdr.len = MJUM9BYTES; 1332 } else { 1333 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1334 if (m == NULL) 1335 return (ENOBUFS); 1336 m->m_len = m->m_pkthdr.len = MCLBYTES; 1337 } 1338 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 1339 m_adj(m, ETHER_ALIGN); 1340 1341 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_rx_mtag, 1342 sc->bge_cdata.bge_rx_std_sparemap, m, segs, &nsegs, 0); 1343 if (error != 0) { 1344 m_freem(m); 1345 return (error); 1346 } 1347 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 1348 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 1349 sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_POSTREAD); 1350 bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, 1351 sc->bge_cdata.bge_rx_std_dmamap[i]); 1352 } 1353 map = sc->bge_cdata.bge_rx_std_dmamap[i]; 1354 sc->bge_cdata.bge_rx_std_dmamap[i] = sc->bge_cdata.bge_rx_std_sparemap; 1355 sc->bge_cdata.bge_rx_std_sparemap = map; 1356 sc->bge_cdata.bge_rx_std_chain[i] = m; 1357 sc->bge_cdata.bge_rx_std_seglen[i] = segs[0].ds_len; 1358 r = &sc->bge_ldata.bge_rx_std_ring[sc->bge_std]; 1359 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); 1360 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); 1361 r->bge_flags = BGE_RXBDFLAG_END; 1362 r->bge_len = segs[0].ds_len; 1363 r->bge_idx = i; 1364 1365 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 1366 sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_PREREAD); 1367 1368 return (0); 1369} 1370 1371/* 1372 * Initialize a jumbo receive ring descriptor. This allocates 1373 * a jumbo buffer from the pool managed internally by the driver. 1374 */ 1375static int 1376bge_newbuf_jumbo(struct bge_softc *sc, int i) 1377{ 1378 bus_dma_segment_t segs[BGE_NSEG_JUMBO]; 1379 bus_dmamap_t map; 1380 struct bge_extrx_bd *r; 1381 struct mbuf *m; 1382 int error, nsegs; 1383 1384 MGETHDR(m, M_NOWAIT, MT_DATA); 1385 if (m == NULL) 1386 return (ENOBUFS); 1387 1388 if (m_cljget(m, M_NOWAIT, MJUM9BYTES) == NULL) { 1389 m_freem(m); 1390 return (ENOBUFS); 1391 } 1392 m->m_len = m->m_pkthdr.len = MJUM9BYTES; 1393 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 1394 m_adj(m, ETHER_ALIGN); 1395 1396 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_mtag_jumbo, 1397 sc->bge_cdata.bge_rx_jumbo_sparemap, m, segs, &nsegs, 0); 1398 if (error != 0) { 1399 m_freem(m); 1400 return (error); 1401 } 1402 1403 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { 1404 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1405 sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_POSTREAD); 1406 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 1407 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1408 } 1409 map = sc->bge_cdata.bge_rx_jumbo_dmamap[i]; 1410 sc->bge_cdata.bge_rx_jumbo_dmamap[i] = 1411 sc->bge_cdata.bge_rx_jumbo_sparemap; 1412 sc->bge_cdata.bge_rx_jumbo_sparemap = map; 1413 sc->bge_cdata.bge_rx_jumbo_chain[i] = m; 1414 sc->bge_cdata.bge_rx_jumbo_seglen[i][0] = 0; 1415 sc->bge_cdata.bge_rx_jumbo_seglen[i][1] = 0; 1416 sc->bge_cdata.bge_rx_jumbo_seglen[i][2] = 0; 1417 sc->bge_cdata.bge_rx_jumbo_seglen[i][3] = 0; 1418 1419 /* 1420 * Fill in the extended RX buffer descriptor. 1421 */ 1422 r = &sc->bge_ldata.bge_rx_jumbo_ring[sc->bge_jumbo]; 1423 r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; 1424 r->bge_idx = i; 1425 r->bge_len3 = r->bge_len2 = r->bge_len1 = 0; 1426 switch (nsegs) { 1427 case 4: 1428 r->bge_addr3.bge_addr_lo = BGE_ADDR_LO(segs[3].ds_addr); 1429 r->bge_addr3.bge_addr_hi = BGE_ADDR_HI(segs[3].ds_addr); 1430 r->bge_len3 = segs[3].ds_len; 1431 sc->bge_cdata.bge_rx_jumbo_seglen[i][3] = segs[3].ds_len; 1432 case 3: 1433 r->bge_addr2.bge_addr_lo = BGE_ADDR_LO(segs[2].ds_addr); 1434 r->bge_addr2.bge_addr_hi = BGE_ADDR_HI(segs[2].ds_addr); 1435 r->bge_len2 = segs[2].ds_len; 1436 sc->bge_cdata.bge_rx_jumbo_seglen[i][2] = segs[2].ds_len; 1437 case 2: 1438 r->bge_addr1.bge_addr_lo = BGE_ADDR_LO(segs[1].ds_addr); 1439 r->bge_addr1.bge_addr_hi = BGE_ADDR_HI(segs[1].ds_addr); 1440 r->bge_len1 = segs[1].ds_len; 1441 sc->bge_cdata.bge_rx_jumbo_seglen[i][1] = segs[1].ds_len; 1442 case 1: 1443 r->bge_addr0.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); 1444 r->bge_addr0.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); 1445 r->bge_len0 = segs[0].ds_len; 1446 sc->bge_cdata.bge_rx_jumbo_seglen[i][0] = segs[0].ds_len; 1447 break; 1448 default: 1449 panic("%s: %d segments\n", __func__, nsegs); 1450 } 1451 1452 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1453 sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_PREREAD); 1454 1455 return (0); 1456} 1457 1458static int 1459bge_init_rx_ring_std(struct bge_softc *sc) 1460{ 1461 int error, i; 1462 1463 bzero(sc->bge_ldata.bge_rx_std_ring, BGE_STD_RX_RING_SZ); 1464 sc->bge_std = 0; 1465 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 1466 if ((error = bge_newbuf_std(sc, i)) != 0) 1467 return (error); 1468 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 1469 } 1470 1471 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 1472 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); 1473 1474 sc->bge_std = 0; 1475 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, BGE_STD_RX_RING_CNT - 1); 1476 1477 return (0); 1478} 1479 1480static void 1481bge_free_rx_ring_std(struct bge_softc *sc) 1482{ 1483 int i; 1484 1485 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 1486 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 1487 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 1488 sc->bge_cdata.bge_rx_std_dmamap[i], 1489 BUS_DMASYNC_POSTREAD); 1490 bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, 1491 sc->bge_cdata.bge_rx_std_dmamap[i]); 1492 m_freem(sc->bge_cdata.bge_rx_std_chain[i]); 1493 sc->bge_cdata.bge_rx_std_chain[i] = NULL; 1494 } 1495 bzero((char *)&sc->bge_ldata.bge_rx_std_ring[i], 1496 sizeof(struct bge_rx_bd)); 1497 } 1498} 1499 1500static int 1501bge_init_rx_ring_jumbo(struct bge_softc *sc) 1502{ 1503 struct bge_rcb *rcb; 1504 int error, i; 1505 1506 bzero(sc->bge_ldata.bge_rx_jumbo_ring, BGE_JUMBO_RX_RING_SZ); 1507 sc->bge_jumbo = 0; 1508 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1509 if ((error = bge_newbuf_jumbo(sc, i)) != 0) 1510 return (error); 1511 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 1512 } 1513 1514 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1515 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); 1516 1517 sc->bge_jumbo = 0; 1518 1519 /* Enable the jumbo receive producer ring. */ 1520 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 1521 rcb->bge_maxlen_flags = 1522 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_USE_EXT_RX_BD); 1523 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 1524 1525 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, BGE_JUMBO_RX_RING_CNT - 1); 1526 1527 return (0); 1528} 1529 1530static void 1531bge_free_rx_ring_jumbo(struct bge_softc *sc) 1532{ 1533 int i; 1534 1535 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1536 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { 1537 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1538 sc->bge_cdata.bge_rx_jumbo_dmamap[i], 1539 BUS_DMASYNC_POSTREAD); 1540 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 1541 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1542 m_freem(sc->bge_cdata.bge_rx_jumbo_chain[i]); 1543 sc->bge_cdata.bge_rx_jumbo_chain[i] = NULL; 1544 } 1545 bzero((char *)&sc->bge_ldata.bge_rx_jumbo_ring[i], 1546 sizeof(struct bge_extrx_bd)); 1547 } 1548} 1549 1550static void 1551bge_free_tx_ring(struct bge_softc *sc) 1552{ 1553 int i; 1554 1555 if (sc->bge_ldata.bge_tx_ring == NULL) 1556 return; 1557 1558 for (i = 0; i < BGE_TX_RING_CNT; i++) { 1559 if (sc->bge_cdata.bge_tx_chain[i] != NULL) { 1560 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, 1561 sc->bge_cdata.bge_tx_dmamap[i], 1562 BUS_DMASYNC_POSTWRITE); 1563 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, 1564 sc->bge_cdata.bge_tx_dmamap[i]); 1565 m_freem(sc->bge_cdata.bge_tx_chain[i]); 1566 sc->bge_cdata.bge_tx_chain[i] = NULL; 1567 } 1568 bzero((char *)&sc->bge_ldata.bge_tx_ring[i], 1569 sizeof(struct bge_tx_bd)); 1570 } 1571} 1572 1573static int 1574bge_init_tx_ring(struct bge_softc *sc) 1575{ 1576 sc->bge_txcnt = 0; 1577 sc->bge_tx_saved_considx = 0; 1578 1579 bzero(sc->bge_ldata.bge_tx_ring, BGE_TX_RING_SZ); 1580 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 1581 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); 1582 1583 /* Initialize transmit producer index for host-memory send ring. */ 1584 sc->bge_tx_prodidx = 0; 1585 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1586 1587 /* 5700 b2 errata */ 1588 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1589 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1590 1591 /* NIC-memory send ring not used; initialize to zero. */ 1592 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1593 /* 5700 b2 errata */ 1594 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1595 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1596 1597 return (0); 1598} 1599 1600static void 1601bge_setpromisc(struct bge_softc *sc) 1602{ 1603 if_t ifp; 1604 1605 BGE_LOCK_ASSERT(sc); 1606 1607 ifp = sc->bge_ifp; 1608 1609 /* Enable or disable promiscuous mode as needed. */ 1610 if (if_getflags(ifp) & IFF_PROMISC) 1611 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1612 else 1613 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1614} 1615 1616static void 1617bge_setmulti(struct bge_softc *sc) 1618{ 1619 if_t ifp; 1620 int mc_count = 0; 1621 uint32_t hashes[4] = { 0, 0, 0, 0 }; 1622 int h, i, mcnt; 1623 unsigned char *mta; 1624 1625 BGE_LOCK_ASSERT(sc); 1626 1627 ifp = sc->bge_ifp; 1628 1629 mc_count = if_multiaddr_count(ifp, -1); 1630 mta = malloc(sizeof(unsigned char) * ETHER_ADDR_LEN * 1631 mc_count, M_DEVBUF, M_NOWAIT); 1632 1633 if(mta == NULL) { 1634 device_printf(sc->bge_dev, 1635 "Failed to allocated temp mcast list\n"); 1636 return; 1637 } 1638 1639 if (if_getflags(ifp) & IFF_ALLMULTI || if_getflags(ifp) & IFF_PROMISC) { 1640 for (i = 0; i < 4; i++) 1641 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF); 1642 free(mta, M_DEVBUF); 1643 return; 1644 } 1645 1646 /* First, zot all the existing filters. */ 1647 for (i = 0; i < 4; i++) 1648 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0); 1649 1650 if_multiaddr_array(ifp, mta, &mcnt, mc_count); 1651 for(i = 0; i < mcnt; i++) { 1652 h = ether_crc32_le(mta + (i * ETHER_ADDR_LEN), 1653 ETHER_ADDR_LEN) & 0x7F; 1654 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F); 1655 } 1656 1657 for (i = 0; i < 4; i++) 1658 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]); 1659 1660 free(mta, M_DEVBUF); 1661} 1662 1663static void 1664bge_setvlan(struct bge_softc *sc) 1665{ 1666 if_t ifp; 1667 1668 BGE_LOCK_ASSERT(sc); 1669 1670 ifp = sc->bge_ifp; 1671 1672 /* Enable or disable VLAN tag stripping as needed. */ 1673 if (if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING) 1674 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1675 else 1676 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1677} 1678 1679static void 1680bge_sig_pre_reset(struct bge_softc *sc, int type) 1681{ 1682 1683 /* 1684 * Some chips don't like this so only do this if ASF is enabled 1685 */ 1686 if (sc->bge_asf_mode) 1687 bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); 1688 1689 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1690 switch (type) { 1691 case BGE_RESET_START: 1692 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1693 BGE_FW_DRV_STATE_START); 1694 break; 1695 case BGE_RESET_SHUTDOWN: 1696 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1697 BGE_FW_DRV_STATE_UNLOAD); 1698 break; 1699 case BGE_RESET_SUSPEND: 1700 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1701 BGE_FW_DRV_STATE_SUSPEND); 1702 break; 1703 } 1704 } 1705 1706 if (type == BGE_RESET_START || type == BGE_RESET_SUSPEND) 1707 bge_ape_driver_state_change(sc, type); 1708} 1709 1710static void 1711bge_sig_post_reset(struct bge_softc *sc, int type) 1712{ 1713 1714 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1715 switch (type) { 1716 case BGE_RESET_START: 1717 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1718 BGE_FW_DRV_STATE_START_DONE); 1719 /* START DONE */ 1720 break; 1721 case BGE_RESET_SHUTDOWN: 1722 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1723 BGE_FW_DRV_STATE_UNLOAD_DONE); 1724 break; 1725 } 1726 } 1727 if (type == BGE_RESET_SHUTDOWN) 1728 bge_ape_driver_state_change(sc, type); 1729} 1730 1731static void 1732bge_sig_legacy(struct bge_softc *sc, int type) 1733{ 1734 1735 if (sc->bge_asf_mode) { 1736 switch (type) { 1737 case BGE_RESET_START: 1738 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1739 BGE_FW_DRV_STATE_START); 1740 break; 1741 case BGE_RESET_SHUTDOWN: 1742 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1743 BGE_FW_DRV_STATE_UNLOAD); 1744 break; 1745 } 1746 } 1747} 1748 1749static void 1750bge_stop_fw(struct bge_softc *sc) 1751{ 1752 int i; 1753 1754 if (sc->bge_asf_mode) { 1755 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, BGE_FW_CMD_PAUSE); 1756 CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, 1757 CSR_READ_4(sc, BGE_RX_CPU_EVENT) | BGE_RX_CPU_DRV_EVENT); 1758 1759 for (i = 0; i < 100; i++ ) { 1760 if (!(CSR_READ_4(sc, BGE_RX_CPU_EVENT) & 1761 BGE_RX_CPU_DRV_EVENT)) 1762 break; 1763 DELAY(10); 1764 } 1765 } 1766} 1767 1768static uint32_t 1769bge_dma_swap_options(struct bge_softc *sc) 1770{ 1771 uint32_t dma_options; 1772 1773 dma_options = BGE_MODECTL_WORDSWAP_NONFRAME | 1774 BGE_MODECTL_BYTESWAP_DATA | BGE_MODECTL_WORDSWAP_DATA; 1775#if BYTE_ORDER == BIG_ENDIAN 1776 dma_options |= BGE_MODECTL_BYTESWAP_NONFRAME; 1777#endif 1778 return (dma_options); 1779} 1780 1781/* 1782 * Do endian, PCI and DMA initialization. 1783 */ 1784static int 1785bge_chipinit(struct bge_softc *sc) 1786{ 1787 uint32_t dma_rw_ctl, misc_ctl, mode_ctl; 1788 uint16_t val; 1789 int i; 1790 1791 /* Set endianness before we access any non-PCI registers. */ 1792 misc_ctl = BGE_INIT; 1793 if (sc->bge_flags & BGE_FLAG_TAGGED_STATUS) 1794 misc_ctl |= BGE_PCIMISCCTL_TAGGED_STATUS; 1795 pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, misc_ctl, 4); 1796 1797 /* 1798 * Clear the MAC statistics block in the NIC's 1799 * internal memory. 1800 */ 1801 for (i = BGE_STATS_BLOCK; 1802 i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t)) 1803 BGE_MEMWIN_WRITE(sc, i, 0); 1804 1805 for (i = BGE_STATUS_BLOCK; 1806 i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t)) 1807 BGE_MEMWIN_WRITE(sc, i, 0); 1808 1809 if (sc->bge_chiprev == BGE_CHIPREV_5704_BX) { 1810 /* 1811 * Fix data corruption caused by non-qword write with WB. 1812 * Fix master abort in PCI mode. 1813 * Fix PCI latency timer. 1814 */ 1815 val = pci_read_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, 2); 1816 val |= (1 << 10) | (1 << 12) | (1 << 13); 1817 pci_write_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, val, 2); 1818 } 1819 1820 if (sc->bge_asicrev == BGE_ASICREV_BCM57765 || 1821 sc->bge_asicrev == BGE_ASICREV_BCM57766) { 1822 /* 1823 * For the 57766 and non Ax versions of 57765, bootcode 1824 * needs to setup the PCIE Fast Training Sequence (FTS) 1825 * value to prevent transmit hangs. 1826 */ 1827 if (sc->bge_chiprev != BGE_CHIPREV_57765_AX) { 1828 CSR_WRITE_4(sc, BGE_CPMU_PADRNG_CTL, 1829 CSR_READ_4(sc, BGE_CPMU_PADRNG_CTL) | 1830 BGE_CPMU_PADRNG_CTL_RDIV2); 1831 } 1832 } 1833 1834 /* 1835 * Set up the PCI DMA control register. 1836 */ 1837 dma_rw_ctl = BGE_PCIDMARWCTL_RD_CMD_SHIFT(6) | 1838 BGE_PCIDMARWCTL_WR_CMD_SHIFT(7); 1839 if (sc->bge_flags & BGE_FLAG_PCIE) { 1840 if (sc->bge_mps >= 256) 1841 dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); 1842 else 1843 dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1844 } else if (sc->bge_flags & BGE_FLAG_PCIX) { 1845 if (BGE_IS_5714_FAMILY(sc)) { 1846 /* 256 bytes for read and write. */ 1847 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(2) | 1848 BGE_PCIDMARWCTL_WR_WAT_SHIFT(2); 1849 dma_rw_ctl |= (sc->bge_asicrev == BGE_ASICREV_BCM5780) ? 1850 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL : 1851 BGE_PCIDMARWCTL_ONEDMA_ATONCE_LOCAL; 1852 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5703) { 1853 /* 1854 * In the BCM5703, the DMA read watermark should 1855 * be set to less than or equal to the maximum 1856 * memory read byte count of the PCI-X command 1857 * register. 1858 */ 1859 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(4) | 1860 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1861 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1862 /* 1536 bytes for read, 384 bytes for write. */ 1863 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1864 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1865 } else { 1866 /* 384 bytes for read and write. */ 1867 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(3) | 1868 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3) | 1869 0x0F; 1870 } 1871 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1872 sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1873 uint32_t tmp; 1874 1875 /* Set ONE_DMA_AT_ONCE for hardware workaround. */ 1876 tmp = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; 1877 if (tmp == 6 || tmp == 7) 1878 dma_rw_ctl |= 1879 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL; 1880 1881 /* Set PCI-X DMA write workaround. */ 1882 dma_rw_ctl |= BGE_PCIDMARWCTL_ASRT_ALL_BE; 1883 } 1884 } else { 1885 /* Conventional PCI bus: 256 bytes for read and write. */ 1886 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1887 BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); 1888 1889 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 && 1890 sc->bge_asicrev != BGE_ASICREV_BCM5750) 1891 dma_rw_ctl |= 0x0F; 1892 } 1893 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 1894 sc->bge_asicrev == BGE_ASICREV_BCM5701) 1895 dma_rw_ctl |= BGE_PCIDMARWCTL_USE_MRM | 1896 BGE_PCIDMARWCTL_ASRT_ALL_BE; 1897 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1898 sc->bge_asicrev == BGE_ASICREV_BCM5704) 1899 dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA; 1900 if (BGE_IS_5717_PLUS(sc)) { 1901 dma_rw_ctl &= ~BGE_PCIDMARWCTL_DIS_CACHE_ALIGNMENT; 1902 if (sc->bge_chipid == BGE_CHIPID_BCM57765_A0) 1903 dma_rw_ctl &= ~BGE_PCIDMARWCTL_CRDRDR_RDMA_MRRS_MSK; 1904 /* 1905 * Enable HW workaround for controllers that misinterpret 1906 * a status tag update and leave interrupts permanently 1907 * disabled. 1908 */ 1909 if (!BGE_IS_57765_PLUS(sc) && 1910 sc->bge_asicrev != BGE_ASICREV_BCM5717 && 1911 sc->bge_asicrev != BGE_ASICREV_BCM5762) 1912 dma_rw_ctl |= BGE_PCIDMARWCTL_TAGGED_STATUS_WA; 1913 } 1914 pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4); 1915 1916 /* 1917 * Set up general mode register. 1918 */ 1919 mode_ctl = bge_dma_swap_options(sc); 1920 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 1921 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 1922 /* Retain Host-2-BMC settings written by APE firmware. */ 1923 mode_ctl |= CSR_READ_4(sc, BGE_MODE_CTL) & 1924 (BGE_MODECTL_BYTESWAP_B2HRX_DATA | 1925 BGE_MODECTL_WORDSWAP_B2HRX_DATA | 1926 BGE_MODECTL_B2HRX_ENABLE | BGE_MODECTL_HTX2B_ENABLE); 1927 } 1928 mode_ctl |= BGE_MODECTL_MAC_ATTN_INTR | BGE_MODECTL_HOST_SEND_BDS | 1929 BGE_MODECTL_TX_NO_PHDR_CSUM; 1930 1931 /* 1932 * BCM5701 B5 have a bug causing data corruption when using 1933 * 64-bit DMA reads, which can be terminated early and then 1934 * completed later as 32-bit accesses, in combination with 1935 * certain bridges. 1936 */ 1937 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 1938 sc->bge_chipid == BGE_CHIPID_BCM5701_B5) 1939 mode_ctl |= BGE_MODECTL_FORCE_PCI32; 1940 1941 /* 1942 * Tell the firmware the driver is running 1943 */ 1944 if (sc->bge_asf_mode & ASF_STACKUP) 1945 mode_ctl |= BGE_MODECTL_STACKUP; 1946 1947 CSR_WRITE_4(sc, BGE_MODE_CTL, mode_ctl); 1948 1949 /* 1950 * Disable memory write invalidate. Apparently it is not supported 1951 * properly by these devices. 1952 */ 1953 PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_MWIEN, 4); 1954 1955 /* Set the timer prescaler (always 66 MHz). */ 1956 CSR_WRITE_4(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); 1957 1958 /* XXX: The Linux tg3 driver does this at the start of brgphy_reset. */ 1959 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 1960 DELAY(40); /* XXX */ 1961 1962 /* Put PHY into ready state */ 1963 BGE_CLRBIT(sc, BGE_MISC_CFG, BGE_MISCCFG_EPHY_IDDQ); 1964 CSR_READ_4(sc, BGE_MISC_CFG); /* Flush */ 1965 DELAY(40); 1966 } 1967 1968 return (0); 1969} 1970 1971static int 1972bge_blockinit(struct bge_softc *sc) 1973{ 1974 struct bge_rcb *rcb; 1975 bus_size_t vrcb; 1976 bge_hostaddr taddr; 1977 uint32_t dmactl, rdmareg, val; 1978 int i, limit; 1979 1980 /* 1981 * Initialize the memory window pointer register so that 1982 * we can access the first 32K of internal NIC RAM. This will 1983 * allow us to set up the TX send ring RCBs and the RX return 1984 * ring RCBs, plus other things which live in NIC memory. 1985 */ 1986 CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0); 1987 1988 /* Note: the BCM5704 has a smaller mbuf space than other chips. */ 1989 1990 if (!(BGE_IS_5705_PLUS(sc))) { 1991 /* Configure mbuf memory pool */ 1992 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR, BGE_BUFFPOOL_1); 1993 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) 1994 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000); 1995 else 1996 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000); 1997 1998 /* Configure DMA resource pool */ 1999 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR, 2000 BGE_DMA_DESCRIPTORS); 2001 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000); 2002 } 2003 2004 /* Configure mbuf pool watermarks */ 2005 if (BGE_IS_5717_PLUS(sc)) { 2006 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 2007 if (if_getmtu(sc->bge_ifp) > ETHERMTU) { 2008 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x7e); 2009 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xea); 2010 } else { 2011 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x2a); 2012 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xa0); 2013 } 2014 } else if (!BGE_IS_5705_PLUS(sc)) { 2015 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50); 2016 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20); 2017 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 2018 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 2019 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 2020 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x04); 2021 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x10); 2022 } else { 2023 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 2024 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10); 2025 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 2026 } 2027 2028 /* Configure DMA resource watermarks */ 2029 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5); 2030 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10); 2031 2032 /* Enable buffer manager */ 2033 val = BGE_BMANMODE_ENABLE | BGE_BMANMODE_LOMBUF_ATTN; 2034 /* 2035 * Change the arbitration algorithm of TXMBUF read request to 2036 * round-robin instead of priority based for BCM5719. When 2037 * TXFIFO is almost empty, RDMA will hold its request until 2038 * TXFIFO is not almost empty. 2039 */ 2040 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 2041 val |= BGE_BMANMODE_NO_TX_UNDERRUN; 2042 CSR_WRITE_4(sc, BGE_BMAN_MODE, val); 2043 2044 /* Poll for buffer manager start indication */ 2045 for (i = 0; i < BGE_TIMEOUT; i++) { 2046 DELAY(10); 2047 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE) 2048 break; 2049 } 2050 2051 if (i == BGE_TIMEOUT) { 2052 device_printf(sc->bge_dev, "buffer manager failed to start\n"); 2053 return (ENXIO); 2054 } 2055 2056 /* Enable flow-through queues */ 2057 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 2058 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 2059 2060 /* Wait until queue initialization is complete */ 2061 for (i = 0; i < BGE_TIMEOUT; i++) { 2062 DELAY(10); 2063 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0) 2064 break; 2065 } 2066 2067 if (i == BGE_TIMEOUT) { 2068 device_printf(sc->bge_dev, "flow-through queue init failed\n"); 2069 return (ENXIO); 2070 } 2071 2072 /* 2073 * Summary of rings supported by the controller: 2074 * 2075 * Standard Receive Producer Ring 2076 * - This ring is used to feed receive buffers for "standard" 2077 * sized frames (typically 1536 bytes) to the controller. 2078 * 2079 * Jumbo Receive Producer Ring 2080 * - This ring is used to feed receive buffers for jumbo sized 2081 * frames (i.e. anything bigger than the "standard" frames) 2082 * to the controller. 2083 * 2084 * Mini Receive Producer Ring 2085 * - This ring is used to feed receive buffers for "mini" 2086 * sized frames to the controller. 2087 * - This feature required external memory for the controller 2088 * but was never used in a production system. Should always 2089 * be disabled. 2090 * 2091 * Receive Return Ring 2092 * - After the controller has placed an incoming frame into a 2093 * receive buffer that buffer is moved into a receive return 2094 * ring. The driver is then responsible to passing the 2095 * buffer up to the stack. Many versions of the controller 2096 * support multiple RR rings. 2097 * 2098 * Send Ring 2099 * - This ring is used for outgoing frames. Many versions of 2100 * the controller support multiple send rings. 2101 */ 2102 2103 /* Initialize the standard receive producer ring control block. */ 2104 rcb = &sc->bge_ldata.bge_info.bge_std_rx_rcb; 2105 rcb->bge_hostaddr.bge_addr_lo = 2106 BGE_ADDR_LO(sc->bge_ldata.bge_rx_std_ring_paddr); 2107 rcb->bge_hostaddr.bge_addr_hi = 2108 BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr); 2109 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 2110 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREREAD); 2111 if (BGE_IS_5717_PLUS(sc)) { 2112 /* 2113 * Bits 31-16: Programmable ring size (2048, 1024, 512, .., 32) 2114 * Bits 15-2 : Maximum RX frame size 2115 * Bit 1 : 1 = Ring Disabled, 0 = Ring ENabled 2116 * Bit 0 : Reserved 2117 */ 2118 rcb->bge_maxlen_flags = 2119 BGE_RCB_MAXLEN_FLAGS(512, BGE_MAX_FRAMELEN << 2); 2120 } else if (BGE_IS_5705_PLUS(sc)) { 2121 /* 2122 * Bits 31-16: Programmable ring size (512, 256, 128, 64, 32) 2123 * Bits 15-2 : Reserved (should be 0) 2124 * Bit 1 : 1 = Ring Disabled, 0 = Ring Enabled 2125 * Bit 0 : Reserved 2126 */ 2127 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0); 2128 } else { 2129 /* 2130 * Ring size is always XXX entries 2131 * Bits 31-16: Maximum RX frame size 2132 * Bits 15-2 : Reserved (should be 0) 2133 * Bit 1 : 1 = Ring Disabled, 0 = Ring Enabled 2134 * Bit 0 : Reserved 2135 */ 2136 rcb->bge_maxlen_flags = 2137 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0); 2138 } 2139 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2140 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2141 sc->bge_asicrev == BGE_ASICREV_BCM5720) 2142 rcb->bge_nicaddr = BGE_STD_RX_RINGS_5717; 2143 else 2144 rcb->bge_nicaddr = BGE_STD_RX_RINGS; 2145 /* Write the standard receive producer ring control block. */ 2146 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi); 2147 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo); 2148 CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 2149 CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr); 2150 2151 /* Reset the standard receive producer ring producer index. */ 2152 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, 0); 2153 2154 /* 2155 * Initialize the jumbo RX producer ring control 2156 * block. We set the 'ring disabled' bit in the 2157 * flags field until we're actually ready to start 2158 * using this ring (i.e. once we set the MTU 2159 * high enough to require it). 2160 */ 2161 if (BGE_IS_JUMBO_CAPABLE(sc)) { 2162 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 2163 /* Get the jumbo receive producer ring RCB parameters. */ 2164 rcb->bge_hostaddr.bge_addr_lo = 2165 BGE_ADDR_LO(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 2166 rcb->bge_hostaddr.bge_addr_hi = 2167 BGE_ADDR_HI(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 2168 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2169 sc->bge_cdata.bge_rx_jumbo_ring_map, 2170 BUS_DMASYNC_PREREAD); 2171 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 2172 BGE_RCB_FLAG_USE_EXT_RX_BD | BGE_RCB_FLAG_RING_DISABLED); 2173 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2174 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2175 sc->bge_asicrev == BGE_ASICREV_BCM5720) 2176 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS_5717; 2177 else 2178 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS; 2179 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI, 2180 rcb->bge_hostaddr.bge_addr_hi); 2181 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO, 2182 rcb->bge_hostaddr.bge_addr_lo); 2183 /* Program the jumbo receive producer ring RCB parameters. */ 2184 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, 2185 rcb->bge_maxlen_flags); 2186 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr); 2187 /* Reset the jumbo receive producer ring producer index. */ 2188 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0); 2189 } 2190 2191 /* Disable the mini receive producer ring RCB. */ 2192 if (BGE_IS_5700_FAMILY(sc)) { 2193 rcb = &sc->bge_ldata.bge_info.bge_mini_rx_rcb; 2194 rcb->bge_maxlen_flags = 2195 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED); 2196 CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS, 2197 rcb->bge_maxlen_flags); 2198 /* Reset the mini receive producer ring producer index. */ 2199 bge_writembx(sc, BGE_MBX_RX_MINI_PROD_LO, 0); 2200 } 2201 2202 /* Choose de-pipeline mode for BCM5906 A0, A1 and A2. */ 2203 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 2204 if (sc->bge_chipid == BGE_CHIPID_BCM5906_A0 || 2205 sc->bge_chipid == BGE_CHIPID_BCM5906_A1 || 2206 sc->bge_chipid == BGE_CHIPID_BCM5906_A2) 2207 CSR_WRITE_4(sc, BGE_ISO_PKT_TX, 2208 (CSR_READ_4(sc, BGE_ISO_PKT_TX) & ~3) | 2); 2209 } 2210 /* 2211 * The BD ring replenish thresholds control how often the 2212 * hardware fetches new BD's from the producer rings in host 2213 * memory. Setting the value too low on a busy system can 2214 * starve the hardware and recue the throughpout. 2215 * 2216 * Set the BD ring replentish thresholds. The recommended 2217 * values are 1/8th the number of descriptors allocated to 2218 * each ring. 2219 * XXX The 5754 requires a lower threshold, so it might be a 2220 * requirement of all 575x family chips. The Linux driver sets 2221 * the lower threshold for all 5705 family chips as well, but there 2222 * are reports that it might not need to be so strict. 2223 * 2224 * XXX Linux does some extra fiddling here for the 5906 parts as 2225 * well. 2226 */ 2227 if (BGE_IS_5705_PLUS(sc)) 2228 val = 8; 2229 else 2230 val = BGE_STD_RX_RING_CNT / 8; 2231 CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val); 2232 if (BGE_IS_JUMBO_CAPABLE(sc)) 2233 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH, 2234 BGE_JUMBO_RX_RING_CNT/8); 2235 if (BGE_IS_5717_PLUS(sc)) { 2236 CSR_WRITE_4(sc, BGE_STD_REPLENISH_LWM, 32); 2237 CSR_WRITE_4(sc, BGE_JMB_REPLENISH_LWM, 16); 2238 } 2239 2240 /* 2241 * Disable all send rings by setting the 'ring disabled' bit 2242 * in the flags field of all the TX send ring control blocks, 2243 * located in NIC memory. 2244 */ 2245 if (!BGE_IS_5705_PLUS(sc)) 2246 /* 5700 to 5704 had 16 send rings. */ 2247 limit = BGE_TX_RINGS_EXTSSRAM_MAX; 2248 else if (BGE_IS_57765_PLUS(sc) || 2249 sc->bge_asicrev == BGE_ASICREV_BCM5762) 2250 limit = 2; 2251 else if (BGE_IS_5717_PLUS(sc)) 2252 limit = 4; 2253 else 2254 limit = 1; 2255 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 2256 for (i = 0; i < limit; i++) { 2257 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2258 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED)); 2259 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 2260 vrcb += sizeof(struct bge_rcb); 2261 } 2262 2263 /* Configure send ring RCB 0 (we use only the first ring) */ 2264 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 2265 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr); 2266 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 2267 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 2268 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2269 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2270 sc->bge_asicrev == BGE_ASICREV_BCM5720) 2271 RCB_WRITE_4(sc, vrcb, bge_nicaddr, BGE_SEND_RING_5717); 2272 else 2273 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 2274 BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT)); 2275 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2276 BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0)); 2277 2278 /* 2279 * Disable all receive return rings by setting the 2280 * 'ring diabled' bit in the flags field of all the receive 2281 * return ring control blocks, located in NIC memory. 2282 */ 2283 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2284 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2285 sc->bge_asicrev == BGE_ASICREV_BCM5720) { 2286 /* Should be 17, use 16 until we get an SRAM map. */ 2287 limit = 16; 2288 } else if (!BGE_IS_5705_PLUS(sc)) 2289 limit = BGE_RX_RINGS_MAX; 2290 else if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 2291 sc->bge_asicrev == BGE_ASICREV_BCM5762 || 2292 BGE_IS_57765_PLUS(sc)) 2293 limit = 4; 2294 else 2295 limit = 1; 2296 /* Disable all receive return rings. */ 2297 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 2298 for (i = 0; i < limit; i++) { 2299 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0); 2300 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0); 2301 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2302 BGE_RCB_FLAG_RING_DISABLED); 2303 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 2304 bge_writembx(sc, BGE_MBX_RX_CONS0_LO + 2305 (i * (sizeof(uint64_t))), 0); 2306 vrcb += sizeof(struct bge_rcb); 2307 } 2308 2309 /* 2310 * Set up receive return ring 0. Note that the NIC address 2311 * for RX return rings is 0x0. The return rings live entirely 2312 * within the host, so the nicaddr field in the RCB isn't used. 2313 */ 2314 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 2315 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_rx_return_ring_paddr); 2316 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 2317 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 2318 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 2319 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2320 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0)); 2321 2322 /* Set random backoff seed for TX */ 2323 CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF, 2324 (IF_LLADDR(sc->bge_ifp)[0] + IF_LLADDR(sc->bge_ifp)[1] + 2325 IF_LLADDR(sc->bge_ifp)[2] + IF_LLADDR(sc->bge_ifp)[3] + 2326 IF_LLADDR(sc->bge_ifp)[4] + IF_LLADDR(sc->bge_ifp)[5]) & 2327 BGE_TX_BACKOFF_SEED_MASK); 2328 2329 /* Set inter-packet gap */ 2330 val = 0x2620; 2331 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 2332 sc->bge_asicrev == BGE_ASICREV_BCM5762) 2333 val |= CSR_READ_4(sc, BGE_TX_LENGTHS) & 2334 (BGE_TXLEN_JMB_FRM_LEN_MSK | BGE_TXLEN_CNT_DN_VAL_MSK); 2335 CSR_WRITE_4(sc, BGE_TX_LENGTHS, val); 2336 2337 /* 2338 * Specify which ring to use for packets that don't match 2339 * any RX rules. 2340 */ 2341 CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08); 2342 2343 /* 2344 * Configure number of RX lists. One interrupt distribution 2345 * list, sixteen active lists, one bad frames class. 2346 */ 2347 CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181); 2348 2349 /* Inialize RX list placement stats mask. */ 2350 CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF); 2351 CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1); 2352 2353 /* Disable host coalescing until we get it set up */ 2354 CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000); 2355 2356 /* Poll to make sure it's shut down. */ 2357 for (i = 0; i < BGE_TIMEOUT; i++) { 2358 DELAY(10); 2359 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE)) 2360 break; 2361 } 2362 2363 if (i == BGE_TIMEOUT) { 2364 device_printf(sc->bge_dev, 2365 "host coalescing engine failed to idle\n"); 2366 return (ENXIO); 2367 } 2368 2369 /* Set up host coalescing defaults */ 2370 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks); 2371 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks); 2372 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_max_coal_bds); 2373 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_max_coal_bds); 2374 if (!(BGE_IS_5705_PLUS(sc))) { 2375 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT, 0); 2376 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT, 0); 2377 } 2378 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, 1); 2379 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, 1); 2380 2381 /* Set up address of statistics block */ 2382 if (!(BGE_IS_5705_PLUS(sc))) { 2383 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI, 2384 BGE_ADDR_HI(sc->bge_ldata.bge_stats_paddr)); 2385 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO, 2386 BGE_ADDR_LO(sc->bge_ldata.bge_stats_paddr)); 2387 CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK); 2388 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK); 2389 CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks); 2390 } 2391 2392 /* Set up address of status block */ 2393 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI, 2394 BGE_ADDR_HI(sc->bge_ldata.bge_status_block_paddr)); 2395 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO, 2396 BGE_ADDR_LO(sc->bge_ldata.bge_status_block_paddr)); 2397 2398 /* Set up status block size. */ 2399 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 2400 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) { 2401 val = BGE_STATBLKSZ_FULL; 2402 bzero(sc->bge_ldata.bge_status_block, BGE_STATUS_BLK_SZ); 2403 } else { 2404 val = BGE_STATBLKSZ_32BYTE; 2405 bzero(sc->bge_ldata.bge_status_block, 32); 2406 } 2407 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 2408 sc->bge_cdata.bge_status_map, 2409 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 2410 2411 /* Turn on host coalescing state machine */ 2412 CSR_WRITE_4(sc, BGE_HCC_MODE, val | BGE_HCCMODE_ENABLE); 2413 2414 /* Turn on RX BD completion state machine and enable attentions */ 2415 CSR_WRITE_4(sc, BGE_RBDC_MODE, 2416 BGE_RBDCMODE_ENABLE | BGE_RBDCMODE_ATTN); 2417 2418 /* Turn on RX list placement state machine */ 2419 CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 2420 2421 /* Turn on RX list selector state machine. */ 2422 if (!(BGE_IS_5705_PLUS(sc))) 2423 CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 2424 2425 /* Turn on DMA, clear stats. */ 2426 val = BGE_MACMODE_TXDMA_ENB | BGE_MACMODE_RXDMA_ENB | 2427 BGE_MACMODE_RX_STATS_CLEAR | BGE_MACMODE_TX_STATS_CLEAR | 2428 BGE_MACMODE_RX_STATS_ENB | BGE_MACMODE_TX_STATS_ENB | 2429 BGE_MACMODE_FRMHDR_DMA_ENB; 2430 2431 if (sc->bge_flags & BGE_FLAG_TBI) 2432 val |= BGE_PORTMODE_TBI; 2433 else if (sc->bge_flags & BGE_FLAG_MII_SERDES) 2434 val |= BGE_PORTMODE_GMII; 2435 else 2436 val |= BGE_PORTMODE_MII; 2437 2438 /* Allow APE to send/receive frames. */ 2439 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) 2440 val |= BGE_MACMODE_APE_RX_EN | BGE_MACMODE_APE_TX_EN; 2441 2442 CSR_WRITE_4(sc, BGE_MAC_MODE, val); 2443 DELAY(40); 2444 2445 /* Set misc. local control, enable interrupts on attentions */ 2446 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN); 2447 2448#ifdef notdef 2449 /* Assert GPIO pins for PHY reset */ 2450 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0 | 2451 BGE_MLC_MISCIO_OUT1 | BGE_MLC_MISCIO_OUT2); 2452 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0 | 2453 BGE_MLC_MISCIO_OUTEN1 | BGE_MLC_MISCIO_OUTEN2); 2454#endif 2455 2456 /* Turn on DMA completion state machine */ 2457 if (!(BGE_IS_5705_PLUS(sc))) 2458 CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 2459 2460 val = BGE_WDMAMODE_ENABLE | BGE_WDMAMODE_ALL_ATTNS; 2461 2462 /* Enable host coalescing bug fix. */ 2463 if (BGE_IS_5755_PLUS(sc)) 2464 val |= BGE_WDMAMODE_STATUS_TAG_FIX; 2465 2466 /* Request larger DMA burst size to get better performance. */ 2467 if (sc->bge_asicrev == BGE_ASICREV_BCM5785) 2468 val |= BGE_WDMAMODE_BURST_ALL_DATA; 2469 2470 /* Turn on write DMA state machine */ 2471 CSR_WRITE_4(sc, BGE_WDMA_MODE, val); 2472 DELAY(40); 2473 2474 /* Turn on read DMA state machine */ 2475 val = BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS; 2476 2477 if (sc->bge_asicrev == BGE_ASICREV_BCM5717) 2478 val |= BGE_RDMAMODE_MULT_DMA_RD_DIS; 2479 2480 if (sc->bge_asicrev == BGE_ASICREV_BCM5784 || 2481 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 2482 sc->bge_asicrev == BGE_ASICREV_BCM57780) 2483 val |= BGE_RDMAMODE_BD_SBD_CRPT_ATTN | 2484 BGE_RDMAMODE_MBUF_RBD_CRPT_ATTN | 2485 BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN; 2486 if (sc->bge_flags & BGE_FLAG_PCIE) 2487 val |= BGE_RDMAMODE_FIFO_LONG_BURST; 2488 if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) { 2489 val |= BGE_RDMAMODE_TSO4_ENABLE; 2490 if (sc->bge_flags & BGE_FLAG_TSO3 || 2491 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 2492 sc->bge_asicrev == BGE_ASICREV_BCM57780) 2493 val |= BGE_RDMAMODE_TSO6_ENABLE; 2494 } 2495 2496 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 2497 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 2498 val |= CSR_READ_4(sc, BGE_RDMA_MODE) & 2499 BGE_RDMAMODE_H2BNC_VLAN_DET; 2500 /* 2501 * Allow multiple outstanding read requests from 2502 * non-LSO read DMA engine. 2503 */ 2504 val &= ~BGE_RDMAMODE_MULT_DMA_RD_DIS; 2505 } 2506 2507 if (sc->bge_asicrev == BGE_ASICREV_BCM5761 || 2508 sc->bge_asicrev == BGE_ASICREV_BCM5784 || 2509 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 2510 sc->bge_asicrev == BGE_ASICREV_BCM57780 || 2511 BGE_IS_5717_PLUS(sc) || BGE_IS_57765_PLUS(sc)) { 2512 if (sc->bge_asicrev == BGE_ASICREV_BCM5762) 2513 rdmareg = BGE_RDMA_RSRVCTRL_REG2; 2514 else 2515 rdmareg = BGE_RDMA_RSRVCTRL; 2516 dmactl = CSR_READ_4(sc, rdmareg); 2517 /* 2518 * Adjust tx margin to prevent TX data corruption and 2519 * fix internal FIFO overflow. 2520 */ 2521 if (sc->bge_chipid == BGE_CHIPID_BCM5719_A0 || 2522 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 2523 dmactl &= ~(BGE_RDMA_RSRVCTRL_FIFO_LWM_MASK | 2524 BGE_RDMA_RSRVCTRL_FIFO_HWM_MASK | 2525 BGE_RDMA_RSRVCTRL_TXMRGN_MASK); 2526 dmactl |= BGE_RDMA_RSRVCTRL_FIFO_LWM_1_5K | 2527 BGE_RDMA_RSRVCTRL_FIFO_HWM_1_5K | 2528 BGE_RDMA_RSRVCTRL_TXMRGN_320B; 2529 } 2530 /* 2531 * Enable fix for read DMA FIFO overruns. 2532 * The fix is to limit the number of RX BDs 2533 * the hardware would fetch at a fime. 2534 */ 2535 CSR_WRITE_4(sc, rdmareg, dmactl | 2536 BGE_RDMA_RSRVCTRL_FIFO_OFLW_FIX); 2537 } 2538 2539 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) { 2540 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, 2541 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) | 2542 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_4K | 2543 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); 2544 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5720) { 2545 /* 2546 * Allow 4KB burst length reads for non-LSO frames. 2547 * Enable 512B burst length reads for buffer descriptors. 2548 */ 2549 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, 2550 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) | 2551 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_512 | 2552 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); 2553 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5762) { 2554 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL_REG2, 2555 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL_REG2) | 2556 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_4K | 2557 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); 2558 } 2559 2560 CSR_WRITE_4(sc, BGE_RDMA_MODE, val); 2561 DELAY(40); 2562 2563 if (sc->bge_flags & BGE_FLAG_RDMA_BUG) { 2564 for (i = 0; i < BGE_NUM_RDMA_CHANNELS / 2; i++) { 2565 val = CSR_READ_4(sc, BGE_RDMA_LENGTH + i * 4); 2566 if ((val & 0xFFFF) > BGE_FRAMELEN) 2567 break; 2568 if (((val >> 16) & 0xFFFF) > BGE_FRAMELEN) 2569 break; 2570 } 2571 if (i != BGE_NUM_RDMA_CHANNELS / 2) { 2572 val = CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL); 2573 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 2574 val |= BGE_RDMA_TX_LENGTH_WA_5719; 2575 else 2576 val |= BGE_RDMA_TX_LENGTH_WA_5720; 2577 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, val); 2578 } 2579 } 2580 2581 /* Turn on RX data completion state machine */ 2582 CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 2583 2584 /* Turn on RX BD initiator state machine */ 2585 CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 2586 2587 /* Turn on RX data and RX BD initiator state machine */ 2588 CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE); 2589 2590 /* Turn on Mbuf cluster free state machine */ 2591 if (!(BGE_IS_5705_PLUS(sc))) 2592 CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 2593 2594 /* Turn on send BD completion state machine */ 2595 CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 2596 2597 /* Turn on send data completion state machine */ 2598 val = BGE_SDCMODE_ENABLE; 2599 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 2600 val |= BGE_SDCMODE_CDELAY; 2601 CSR_WRITE_4(sc, BGE_SDC_MODE, val); 2602 2603 /* Turn on send data initiator state machine */ 2604 if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) 2605 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE | 2606 BGE_SDIMODE_HW_LSO_PRE_DMA); 2607 else 2608 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 2609 2610 /* Turn on send BD initiator state machine */ 2611 CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 2612 2613 /* Turn on send BD selector state machine */ 2614 CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 2615 2616 CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF); 2617 CSR_WRITE_4(sc, BGE_SDI_STATS_CTL, 2618 BGE_SDISTATSCTL_ENABLE | BGE_SDISTATSCTL_FASTER); 2619 2620 /* ack/clear link change events */ 2621 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 2622 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 2623 BGE_MACSTAT_LINK_CHANGED); 2624 CSR_WRITE_4(sc, BGE_MI_STS, 0); 2625 2626 /* 2627 * Enable attention when the link has changed state for 2628 * devices that use auto polling. 2629 */ 2630 if (sc->bge_flags & BGE_FLAG_TBI) { 2631 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK); 2632 } else { 2633 if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) { 2634 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); 2635 DELAY(80); 2636 } 2637 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 2638 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) 2639 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 2640 BGE_EVTENB_MI_INTERRUPT); 2641 } 2642 2643 /* 2644 * Clear any pending link state attention. 2645 * Otherwise some link state change events may be lost until attention 2646 * is cleared by bge_intr() -> bge_link_upd() sequence. 2647 * It's not necessary on newer BCM chips - perhaps enabling link 2648 * state change attentions implies clearing pending attention. 2649 */ 2650 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 2651 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 2652 BGE_MACSTAT_LINK_CHANGED); 2653 2654 /* Enable link state change attentions. */ 2655 BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED); 2656 2657 return (0); 2658} 2659 2660static const struct bge_revision * 2661bge_lookup_rev(uint32_t chipid) 2662{ 2663 const struct bge_revision *br; 2664 2665 for (br = bge_revisions; br->br_name != NULL; br++) { 2666 if (br->br_chipid == chipid) 2667 return (br); 2668 } 2669 2670 for (br = bge_majorrevs; br->br_name != NULL; br++) { 2671 if (br->br_chipid == BGE_ASICREV(chipid)) 2672 return (br); 2673 } 2674 2675 return (NULL); 2676} 2677 2678static const struct bge_vendor * 2679bge_lookup_vendor(uint16_t vid) 2680{ 2681 const struct bge_vendor *v; 2682 2683 for (v = bge_vendors; v->v_name != NULL; v++) 2684 if (v->v_id == vid) 2685 return (v); 2686 2687 return (NULL); 2688} 2689 2690static uint32_t 2691bge_chipid(device_t dev) 2692{ 2693 uint32_t id; 2694 2695 id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> 2696 BGE_PCIMISCCTL_ASICREV_SHIFT; 2697 if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG) { 2698 /* 2699 * Find the ASCI revision. Different chips use different 2700 * registers. 2701 */ 2702 switch (pci_get_device(dev)) { 2703 case BCOM_DEVICEID_BCM5717C: 2704 /* 5717 C0 seems to belong to 5720 line. */ 2705 id = BGE_CHIPID_BCM5720_A0; 2706 break; 2707 case BCOM_DEVICEID_BCM5717: 2708 case BCOM_DEVICEID_BCM5718: 2709 case BCOM_DEVICEID_BCM5719: 2710 case BCOM_DEVICEID_BCM5720: 2711 case BCOM_DEVICEID_BCM5725: 2712 case BCOM_DEVICEID_BCM5727: 2713 case BCOM_DEVICEID_BCM5762: 2714 case BCOM_DEVICEID_BCM57764: 2715 case BCOM_DEVICEID_BCM57767: 2716 case BCOM_DEVICEID_BCM57787: 2717 id = pci_read_config(dev, 2718 BGE_PCI_GEN2_PRODID_ASICREV, 4); 2719 break; 2720 case BCOM_DEVICEID_BCM57761: 2721 case BCOM_DEVICEID_BCM57762: 2722 case BCOM_DEVICEID_BCM57765: 2723 case BCOM_DEVICEID_BCM57766: 2724 case BCOM_DEVICEID_BCM57781: 2725 case BCOM_DEVICEID_BCM57782: 2726 case BCOM_DEVICEID_BCM57785: 2727 case BCOM_DEVICEID_BCM57786: 2728 case BCOM_DEVICEID_BCM57791: 2729 case BCOM_DEVICEID_BCM57795: 2730 id = pci_read_config(dev, 2731 BGE_PCI_GEN15_PRODID_ASICREV, 4); 2732 break; 2733 default: 2734 id = pci_read_config(dev, BGE_PCI_PRODID_ASICREV, 4); 2735 } 2736 } 2737 return (id); 2738} 2739 2740/* 2741 * Probe for a Broadcom chip. Check the PCI vendor and device IDs 2742 * against our list and return its name if we find a match. 2743 * 2744 * Note that since the Broadcom controller contains VPD support, we 2745 * try to get the device name string from the controller itself instead 2746 * of the compiled-in string. It guarantees we'll always announce the 2747 * right product name. We fall back to the compiled-in string when 2748 * VPD is unavailable or corrupt. 2749 */ 2750static int 2751bge_probe(device_t dev) 2752{ 2753 char buf[96]; 2754 char model[64]; 2755 const struct bge_revision *br; 2756 const char *pname; 2757 struct bge_softc *sc; 2758 const struct bge_type *t = bge_devs; 2759 const struct bge_vendor *v; 2760 uint32_t id; 2761 uint16_t did, vid; 2762 2763 sc = device_get_softc(dev); 2764 sc->bge_dev = dev; 2765 vid = pci_get_vendor(dev); 2766 did = pci_get_device(dev); 2767 while(t->bge_vid != 0) { 2768 if ((vid == t->bge_vid) && (did == t->bge_did)) { 2769 id = bge_chipid(dev); 2770 br = bge_lookup_rev(id); 2771 if (bge_has_eaddr(sc) && 2772 pci_get_vpd_ident(dev, &pname) == 0) 2773 snprintf(model, sizeof(model), "%s", pname); 2774 else { 2775 v = bge_lookup_vendor(vid); 2776 snprintf(model, sizeof(model), "%s %s", 2777 v != NULL ? v->v_name : "Unknown", 2778 br != NULL ? br->br_name : 2779 "NetXtreme/NetLink Ethernet Controller"); 2780 } 2781 snprintf(buf, sizeof(buf), "%s, %sASIC rev. %#08x", 2782 model, br != NULL ? "" : "unknown ", id); 2783 device_set_desc_copy(dev, buf); 2784 return (BUS_PROBE_DEFAULT); 2785 } 2786 t++; 2787 } 2788 2789 return (ENXIO); 2790} 2791 2792static void 2793bge_dma_free(struct bge_softc *sc) 2794{ 2795 int i; 2796 2797 /* Destroy DMA maps for RX buffers. */ 2798 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 2799 if (sc->bge_cdata.bge_rx_std_dmamap[i]) 2800 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, 2801 sc->bge_cdata.bge_rx_std_dmamap[i]); 2802 } 2803 if (sc->bge_cdata.bge_rx_std_sparemap) 2804 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, 2805 sc->bge_cdata.bge_rx_std_sparemap); 2806 2807 /* Destroy DMA maps for jumbo RX buffers. */ 2808 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 2809 if (sc->bge_cdata.bge_rx_jumbo_dmamap[i]) 2810 bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, 2811 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 2812 } 2813 if (sc->bge_cdata.bge_rx_jumbo_sparemap) 2814 bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, 2815 sc->bge_cdata.bge_rx_jumbo_sparemap); 2816 2817 /* Destroy DMA maps for TX buffers. */ 2818 for (i = 0; i < BGE_TX_RING_CNT; i++) { 2819 if (sc->bge_cdata.bge_tx_dmamap[i]) 2820 bus_dmamap_destroy(sc->bge_cdata.bge_tx_mtag, 2821 sc->bge_cdata.bge_tx_dmamap[i]); 2822 } 2823 2824 if (sc->bge_cdata.bge_rx_mtag) 2825 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_mtag); 2826 if (sc->bge_cdata.bge_mtag_jumbo) 2827 bus_dma_tag_destroy(sc->bge_cdata.bge_mtag_jumbo); 2828 if (sc->bge_cdata.bge_tx_mtag) 2829 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_mtag); 2830 2831 /* Destroy standard RX ring. */ 2832 if (sc->bge_ldata.bge_rx_std_ring_paddr) 2833 bus_dmamap_unload(sc->bge_cdata.bge_rx_std_ring_tag, 2834 sc->bge_cdata.bge_rx_std_ring_map); 2835 if (sc->bge_ldata.bge_rx_std_ring) 2836 bus_dmamem_free(sc->bge_cdata.bge_rx_std_ring_tag, 2837 sc->bge_ldata.bge_rx_std_ring, 2838 sc->bge_cdata.bge_rx_std_ring_map); 2839 2840 if (sc->bge_cdata.bge_rx_std_ring_tag) 2841 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_std_ring_tag); 2842 2843 /* Destroy jumbo RX ring. */ 2844 if (sc->bge_ldata.bge_rx_jumbo_ring_paddr) 2845 bus_dmamap_unload(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2846 sc->bge_cdata.bge_rx_jumbo_ring_map); 2847 2848 if (sc->bge_ldata.bge_rx_jumbo_ring) 2849 bus_dmamem_free(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2850 sc->bge_ldata.bge_rx_jumbo_ring, 2851 sc->bge_cdata.bge_rx_jumbo_ring_map); 2852 2853 if (sc->bge_cdata.bge_rx_jumbo_ring_tag) 2854 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_jumbo_ring_tag); 2855 2856 /* Destroy RX return ring. */ 2857 if (sc->bge_ldata.bge_rx_return_ring_paddr) 2858 bus_dmamap_unload(sc->bge_cdata.bge_rx_return_ring_tag, 2859 sc->bge_cdata.bge_rx_return_ring_map); 2860 2861 if (sc->bge_ldata.bge_rx_return_ring) 2862 bus_dmamem_free(sc->bge_cdata.bge_rx_return_ring_tag, 2863 sc->bge_ldata.bge_rx_return_ring, 2864 sc->bge_cdata.bge_rx_return_ring_map); 2865 2866 if (sc->bge_cdata.bge_rx_return_ring_tag) 2867 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_return_ring_tag); 2868 2869 /* Destroy TX ring. */ 2870 if (sc->bge_ldata.bge_tx_ring_paddr) 2871 bus_dmamap_unload(sc->bge_cdata.bge_tx_ring_tag, 2872 sc->bge_cdata.bge_tx_ring_map); 2873 2874 if (sc->bge_ldata.bge_tx_ring) 2875 bus_dmamem_free(sc->bge_cdata.bge_tx_ring_tag, 2876 sc->bge_ldata.bge_tx_ring, 2877 sc->bge_cdata.bge_tx_ring_map); 2878 2879 if (sc->bge_cdata.bge_tx_ring_tag) 2880 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_ring_tag); 2881 2882 /* Destroy status block. */ 2883 if (sc->bge_ldata.bge_status_block_paddr) 2884 bus_dmamap_unload(sc->bge_cdata.bge_status_tag, 2885 sc->bge_cdata.bge_status_map); 2886 2887 if (sc->bge_ldata.bge_status_block) 2888 bus_dmamem_free(sc->bge_cdata.bge_status_tag, 2889 sc->bge_ldata.bge_status_block, 2890 sc->bge_cdata.bge_status_map); 2891 2892 if (sc->bge_cdata.bge_status_tag) 2893 bus_dma_tag_destroy(sc->bge_cdata.bge_status_tag); 2894 2895 /* Destroy statistics block. */ 2896 if (sc->bge_ldata.bge_stats_paddr) 2897 bus_dmamap_unload(sc->bge_cdata.bge_stats_tag, 2898 sc->bge_cdata.bge_stats_map); 2899 2900 if (sc->bge_ldata.bge_stats) 2901 bus_dmamem_free(sc->bge_cdata.bge_stats_tag, 2902 sc->bge_ldata.bge_stats, 2903 sc->bge_cdata.bge_stats_map); 2904 2905 if (sc->bge_cdata.bge_stats_tag) 2906 bus_dma_tag_destroy(sc->bge_cdata.bge_stats_tag); 2907 2908 if (sc->bge_cdata.bge_buffer_tag) 2909 bus_dma_tag_destroy(sc->bge_cdata.bge_buffer_tag); 2910 2911 /* Destroy the parent tag. */ 2912 if (sc->bge_cdata.bge_parent_tag) 2913 bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag); 2914} 2915 2916static int 2917bge_dma_ring_alloc(struct bge_softc *sc, bus_size_t alignment, 2918 bus_size_t maxsize, bus_dma_tag_t *tag, uint8_t **ring, bus_dmamap_t *map, 2919 bus_addr_t *paddr, const char *msg) 2920{ 2921 struct bge_dmamap_arg ctx; 2922 int error; 2923 2924 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2925 alignment, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2926 NULL, maxsize, 1, maxsize, 0, NULL, NULL, tag); 2927 if (error != 0) { 2928 device_printf(sc->bge_dev, 2929 "could not create %s dma tag\n", msg); 2930 return (ENOMEM); 2931 } 2932 /* Allocate DMA'able memory for ring. */ 2933 error = bus_dmamem_alloc(*tag, (void **)ring, 2934 BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, map); 2935 if (error != 0) { 2936 device_printf(sc->bge_dev, 2937 "could not allocate DMA'able memory for %s\n", msg); 2938 return (ENOMEM); 2939 } 2940 /* Load the address of the ring. */ 2941 ctx.bge_busaddr = 0; 2942 error = bus_dmamap_load(*tag, *map, *ring, maxsize, bge_dma_map_addr, 2943 &ctx, BUS_DMA_NOWAIT); 2944 if (error != 0) { 2945 device_printf(sc->bge_dev, 2946 "could not load DMA'able memory for %s\n", msg); 2947 return (ENOMEM); 2948 } 2949 *paddr = ctx.bge_busaddr; 2950 return (0); 2951} 2952 2953static int 2954bge_dma_alloc(struct bge_softc *sc) 2955{ 2956 bus_addr_t lowaddr; 2957 bus_size_t rxmaxsegsz, sbsz, txsegsz, txmaxsegsz; 2958 int i, error; 2959 2960 lowaddr = BUS_SPACE_MAXADDR; 2961 if ((sc->bge_flags & BGE_FLAG_40BIT_BUG) != 0) 2962 lowaddr = BGE_DMA_MAXADDR; 2963 /* 2964 * Allocate the parent bus DMA tag appropriate for PCI. 2965 */ 2966 error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 2967 1, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, 2968 NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 2969 0, NULL, NULL, &sc->bge_cdata.bge_parent_tag); 2970 if (error != 0) { 2971 device_printf(sc->bge_dev, 2972 "could not allocate parent dma tag\n"); 2973 return (ENOMEM); 2974 } 2975 2976 /* Create tag for standard RX ring. */ 2977 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STD_RX_RING_SZ, 2978 &sc->bge_cdata.bge_rx_std_ring_tag, 2979 (uint8_t **)&sc->bge_ldata.bge_rx_std_ring, 2980 &sc->bge_cdata.bge_rx_std_ring_map, 2981 &sc->bge_ldata.bge_rx_std_ring_paddr, "RX ring"); 2982 if (error) 2983 return (error); 2984 2985 /* Create tag for RX return ring. */ 2986 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_RX_RTN_RING_SZ(sc), 2987 &sc->bge_cdata.bge_rx_return_ring_tag, 2988 (uint8_t **)&sc->bge_ldata.bge_rx_return_ring, 2989 &sc->bge_cdata.bge_rx_return_ring_map, 2990 &sc->bge_ldata.bge_rx_return_ring_paddr, "RX return ring"); 2991 if (error) 2992 return (error); 2993 2994 /* Create tag for TX ring. */ 2995 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_TX_RING_SZ, 2996 &sc->bge_cdata.bge_tx_ring_tag, 2997 (uint8_t **)&sc->bge_ldata.bge_tx_ring, 2998 &sc->bge_cdata.bge_tx_ring_map, 2999 &sc->bge_ldata.bge_tx_ring_paddr, "TX ring"); 3000 if (error) 3001 return (error); 3002 3003 /* 3004 * Create tag for status block. 3005 * Because we only use single Tx/Rx/Rx return ring, use 3006 * minimum status block size except BCM5700 AX/BX which 3007 * seems to want to see full status block size regardless 3008 * of configured number of ring. 3009 */ 3010 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 3011 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) 3012 sbsz = BGE_STATUS_BLK_SZ; 3013 else 3014 sbsz = 32; 3015 error = bge_dma_ring_alloc(sc, PAGE_SIZE, sbsz, 3016 &sc->bge_cdata.bge_status_tag, 3017 (uint8_t **)&sc->bge_ldata.bge_status_block, 3018 &sc->bge_cdata.bge_status_map, 3019 &sc->bge_ldata.bge_status_block_paddr, "status block"); 3020 if (error) 3021 return (error); 3022 3023 /* Create tag for statistics block. */ 3024 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STATS_SZ, 3025 &sc->bge_cdata.bge_stats_tag, 3026 (uint8_t **)&sc->bge_ldata.bge_stats, 3027 &sc->bge_cdata.bge_stats_map, 3028 &sc->bge_ldata.bge_stats_paddr, "statistics block"); 3029 if (error) 3030 return (error); 3031 3032 /* Create tag for jumbo RX ring. */ 3033 if (BGE_IS_JUMBO_CAPABLE(sc)) { 3034 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_JUMBO_RX_RING_SZ, 3035 &sc->bge_cdata.bge_rx_jumbo_ring_tag, 3036 (uint8_t **)&sc->bge_ldata.bge_rx_jumbo_ring, 3037 &sc->bge_cdata.bge_rx_jumbo_ring_map, 3038 &sc->bge_ldata.bge_rx_jumbo_ring_paddr, "jumbo RX ring"); 3039 if (error) 3040 return (error); 3041 } 3042 3043 /* Create parent tag for buffers. */ 3044 if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0) { 3045 /* 3046 * XXX 3047 * watchdog timeout issue was observed on BCM5704 which 3048 * lives behind PCI-X bridge(e.g AMD 8131 PCI-X bridge). 3049 * Both limiting DMA address space to 32bits and flushing 3050 * mailbox write seem to address the issue. 3051 */ 3052 if (sc->bge_pcixcap != 0) 3053 lowaddr = BUS_SPACE_MAXADDR_32BIT; 3054 } 3055 error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 1, 0, lowaddr, 3056 BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE_32BIT, 0, 3057 BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL, 3058 &sc->bge_cdata.bge_buffer_tag); 3059 if (error != 0) { 3060 device_printf(sc->bge_dev, 3061 "could not allocate buffer dma tag\n"); 3062 return (ENOMEM); 3063 } 3064 /* Create tag for Tx mbufs. */ 3065 if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) { 3066 txsegsz = BGE_TSOSEG_SZ; 3067 txmaxsegsz = 65535 + sizeof(struct ether_vlan_header); 3068 } else { 3069 txsegsz = MCLBYTES; 3070 txmaxsegsz = MCLBYTES * BGE_NSEG_NEW; 3071 } 3072 error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 3073 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, 3074 txmaxsegsz, BGE_NSEG_NEW, txsegsz, 0, NULL, NULL, 3075 &sc->bge_cdata.bge_tx_mtag); 3076 3077 if (error) { 3078 device_printf(sc->bge_dev, "could not allocate TX dma tag\n"); 3079 return (ENOMEM); 3080 } 3081 3082 /* Create tag for Rx mbufs. */ 3083 if (sc->bge_flags & BGE_FLAG_JUMBO_STD) 3084 rxmaxsegsz = MJUM9BYTES; 3085 else 3086 rxmaxsegsz = MCLBYTES; 3087 error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, 3088 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, rxmaxsegsz, 1, 3089 rxmaxsegsz, 0, NULL, NULL, &sc->bge_cdata.bge_rx_mtag); 3090 3091 if (error) { 3092 device_printf(sc->bge_dev, "could not allocate RX dma tag\n"); 3093 return (ENOMEM); 3094 } 3095 3096 /* Create DMA maps for RX buffers. */ 3097 error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, 3098 &sc->bge_cdata.bge_rx_std_sparemap); 3099 if (error) { 3100 device_printf(sc->bge_dev, 3101 "can't create spare DMA map for RX\n"); 3102 return (ENOMEM); 3103 } 3104 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 3105 error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, 3106 &sc->bge_cdata.bge_rx_std_dmamap[i]); 3107 if (error) { 3108 device_printf(sc->bge_dev, 3109 "can't create DMA map for RX\n"); 3110 return (ENOMEM); 3111 } 3112 } 3113 3114 /* Create DMA maps for TX buffers. */ 3115 for (i = 0; i < BGE_TX_RING_CNT; i++) { 3116 error = bus_dmamap_create(sc->bge_cdata.bge_tx_mtag, 0, 3117 &sc->bge_cdata.bge_tx_dmamap[i]); 3118 if (error) { 3119 device_printf(sc->bge_dev, 3120 "can't create DMA map for TX\n"); 3121 return (ENOMEM); 3122 } 3123 } 3124 3125 /* Create tags for jumbo RX buffers. */ 3126 if (BGE_IS_JUMBO_CAPABLE(sc)) { 3127 error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 3128 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 3129 NULL, MJUM9BYTES, BGE_NSEG_JUMBO, PAGE_SIZE, 3130 0, NULL, NULL, &sc->bge_cdata.bge_mtag_jumbo); 3131 if (error) { 3132 device_printf(sc->bge_dev, 3133 "could not allocate jumbo dma tag\n"); 3134 return (ENOMEM); 3135 } 3136 /* Create DMA maps for jumbo RX buffers. */ 3137 error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 3138 0, &sc->bge_cdata.bge_rx_jumbo_sparemap); 3139 if (error) { 3140 device_printf(sc->bge_dev, 3141 "can't create spare DMA map for jumbo RX\n"); 3142 return (ENOMEM); 3143 } 3144 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 3145 error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 3146 0, &sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 3147 if (error) { 3148 device_printf(sc->bge_dev, 3149 "can't create DMA map for jumbo RX\n"); 3150 return (ENOMEM); 3151 } 3152 } 3153 } 3154 3155 return (0); 3156} 3157 3158/* 3159 * Return true if this device has more than one port. 3160 */ 3161static int 3162bge_has_multiple_ports(struct bge_softc *sc) 3163{ 3164 device_t dev = sc->bge_dev; 3165 u_int b, d, f, fscan, s; 3166 3167 d = pci_get_domain(dev); 3168 b = pci_get_bus(dev); 3169 s = pci_get_slot(dev); 3170 f = pci_get_function(dev); 3171 for (fscan = 0; fscan <= PCI_FUNCMAX; fscan++) 3172 if (fscan != f && pci_find_dbsf(d, b, s, fscan) != NULL) 3173 return (1); 3174 return (0); 3175} 3176 3177/* 3178 * Return true if MSI can be used with this device. 3179 */ 3180static int 3181bge_can_use_msi(struct bge_softc *sc) 3182{ 3183 int can_use_msi = 0; 3184 3185 if (sc->bge_msi == 0) 3186 return (0); 3187 3188 /* Disable MSI for polling(4). */ 3189#ifdef DEVICE_POLLING 3190 return (0); 3191#endif 3192 switch (sc->bge_asicrev) { 3193 case BGE_ASICREV_BCM5714_A0: 3194 case BGE_ASICREV_BCM5714: 3195 /* 3196 * Apparently, MSI doesn't work when these chips are 3197 * configured in single-port mode. 3198 */ 3199 if (bge_has_multiple_ports(sc)) 3200 can_use_msi = 1; 3201 break; 3202 case BGE_ASICREV_BCM5750: 3203 if (sc->bge_chiprev != BGE_CHIPREV_5750_AX && 3204 sc->bge_chiprev != BGE_CHIPREV_5750_BX) 3205 can_use_msi = 1; 3206 break; 3207 default: 3208 if (BGE_IS_575X_PLUS(sc)) 3209 can_use_msi = 1; 3210 } 3211 return (can_use_msi); 3212} 3213 3214static int 3215bge_mbox_reorder(struct bge_softc *sc) 3216{ 3217 /* Lists of PCI bridges that are known to reorder mailbox writes. */ 3218 static const struct mbox_reorder { 3219 const uint16_t vendor; 3220 const uint16_t device; 3221 const char *desc; 3222 } mbox_reorder_lists[] = { 3223 { 0x1022, 0x7450, "AMD-8131 PCI-X Bridge" }, 3224 }; 3225 devclass_t pci, pcib; 3226 device_t bus, dev; 3227 int i; 3228 3229 pci = devclass_find("pci"); 3230 pcib = devclass_find("pcib"); 3231 dev = sc->bge_dev; 3232 bus = device_get_parent(dev); 3233 for (;;) { 3234 dev = device_get_parent(bus); 3235 bus = device_get_parent(dev); 3236 if (device_get_devclass(dev) != pcib) 3237 break; 3238 for (i = 0; i < nitems(mbox_reorder_lists); i++) { 3239 if (pci_get_vendor(dev) == 3240 mbox_reorder_lists[i].vendor && 3241 pci_get_device(dev) == 3242 mbox_reorder_lists[i].device) { 3243 device_printf(sc->bge_dev, 3244 "enabling MBOX workaround for %s\n", 3245 mbox_reorder_lists[i].desc); 3246 return (1); 3247 } 3248 } 3249 if (device_get_devclass(bus) != pci) 3250 break; 3251 } 3252 return (0); 3253} 3254 3255static void 3256bge_devinfo(struct bge_softc *sc) 3257{ 3258 uint32_t cfg, clk; 3259 3260 device_printf(sc->bge_dev, 3261 "CHIP ID 0x%08x; ASIC REV 0x%02x; CHIP REV 0x%02x; ", 3262 sc->bge_chipid, sc->bge_asicrev, sc->bge_chiprev); 3263 if (sc->bge_flags & BGE_FLAG_PCIE) 3264 printf("PCI-E\n"); 3265 else if (sc->bge_flags & BGE_FLAG_PCIX) { 3266 printf("PCI-X "); 3267 cfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK; 3268 if (cfg == BGE_MISCCFG_BOARD_ID_5704CIOBE) 3269 clk = 133; 3270 else { 3271 clk = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; 3272 switch (clk) { 3273 case 0: 3274 clk = 33; 3275 break; 3276 case 2: 3277 clk = 50; 3278 break; 3279 case 4: 3280 clk = 66; 3281 break; 3282 case 6: 3283 clk = 100; 3284 break; 3285 case 7: 3286 clk = 133; 3287 break; 3288 } 3289 } 3290 printf("%u MHz\n", clk); 3291 } else { 3292 if (sc->bge_pcixcap != 0) 3293 printf("PCI on PCI-X "); 3294 else 3295 printf("PCI "); 3296 cfg = pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4); 3297 if (cfg & BGE_PCISTATE_PCI_BUSSPEED) 3298 clk = 66; 3299 else 3300 clk = 33; 3301 if (cfg & BGE_PCISTATE_32BIT_BUS) 3302 printf("%u MHz; 32bit\n", clk); 3303 else 3304 printf("%u MHz; 64bit\n", clk); 3305 } 3306} 3307 3308static int 3309bge_attach(device_t dev) 3310{ 3311 if_t ifp; 3312 struct bge_softc *sc; 3313 uint32_t hwcfg = 0, misccfg, pcistate; 3314 u_char eaddr[ETHER_ADDR_LEN]; 3315 int capmask, error, reg, rid, trys; 3316 3317 sc = device_get_softc(dev); 3318 sc->bge_dev = dev; 3319 3320 BGE_LOCK_INIT(sc, device_get_nameunit(dev)); 3321 TASK_INIT(&sc->bge_intr_task, 0, bge_intr_task, sc); 3322 callout_init_mtx(&sc->bge_stat_ch, &sc->bge_mtx, 0); 3323 3324 pci_enable_busmaster(dev); 3325 3326 /* 3327 * Allocate control/status registers. 3328 */ 3329 rid = PCIR_BAR(0); 3330 sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 3331 RF_ACTIVE); 3332 3333 if (sc->bge_res == NULL) { 3334 device_printf (sc->bge_dev, "couldn't map BAR0 memory\n"); 3335 error = ENXIO; 3336 goto fail; 3337 } 3338 3339 /* Save various chip information. */ 3340 sc->bge_func_addr = pci_get_function(dev); 3341 sc->bge_chipid = bge_chipid(dev); 3342 sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid); 3343 sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid); 3344 3345 /* Set default PHY address. */ 3346 sc->bge_phy_addr = 1; 3347 /* 3348 * PHY address mapping for various devices. 3349 * 3350 * | F0 Cu | F0 Sr | F1 Cu | F1 Sr | 3351 * ---------+-------+-------+-------+-------+ 3352 * BCM57XX | 1 | X | X | X | 3353 * BCM5704 | 1 | X | 1 | X | 3354 * BCM5717 | 1 | 8 | 2 | 9 | 3355 * BCM5719 | 1 | 8 | 2 | 9 | 3356 * BCM5720 | 1 | 8 | 2 | 9 | 3357 * 3358 * | F2 Cu | F2 Sr | F3 Cu | F3 Sr | 3359 * ---------+-------+-------+-------+-------+ 3360 * BCM57XX | X | X | X | X | 3361 * BCM5704 | X | X | X | X | 3362 * BCM5717 | X | X | X | X | 3363 * BCM5719 | 3 | 10 | 4 | 11 | 3364 * BCM5720 | X | X | X | X | 3365 * 3366 * Other addresses may respond but they are not 3367 * IEEE compliant PHYs and should be ignored. 3368 */ 3369 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 3370 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 3371 sc->bge_asicrev == BGE_ASICREV_BCM5720) { 3372 if (sc->bge_chipid != BGE_CHIPID_BCM5717_A0) { 3373 if (CSR_READ_4(sc, BGE_SGDIG_STS) & 3374 BGE_SGDIGSTS_IS_SERDES) 3375 sc->bge_phy_addr = sc->bge_func_addr + 8; 3376 else 3377 sc->bge_phy_addr = sc->bge_func_addr + 1; 3378 } else { 3379 if (CSR_READ_4(sc, BGE_CPMU_PHY_STRAP) & 3380 BGE_CPMU_PHY_STRAP_IS_SERDES) 3381 sc->bge_phy_addr = sc->bge_func_addr + 8; 3382 else 3383 sc->bge_phy_addr = sc->bge_func_addr + 1; 3384 } 3385 } 3386 3387 if (bge_has_eaddr(sc)) 3388 sc->bge_flags |= BGE_FLAG_EADDR; 3389 3390 /* Save chipset family. */ 3391 switch (sc->bge_asicrev) { 3392 case BGE_ASICREV_BCM5762: 3393 case BGE_ASICREV_BCM57765: 3394 case BGE_ASICREV_BCM57766: 3395 sc->bge_flags |= BGE_FLAG_57765_PLUS; 3396 /* FALLTHROUGH */ 3397 case BGE_ASICREV_BCM5717: 3398 case BGE_ASICREV_BCM5719: 3399 case BGE_ASICREV_BCM5720: 3400 sc->bge_flags |= BGE_FLAG_5717_PLUS | BGE_FLAG_5755_PLUS | 3401 BGE_FLAG_575X_PLUS | BGE_FLAG_5705_PLUS | BGE_FLAG_JUMBO | 3402 BGE_FLAG_JUMBO_FRAME; 3403 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 || 3404 sc->bge_asicrev == BGE_ASICREV_BCM5720) { 3405 /* 3406 * Enable work around for DMA engine miscalculation 3407 * of TXMBUF available space. 3408 */ 3409 sc->bge_flags |= BGE_FLAG_RDMA_BUG; 3410 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 && 3411 sc->bge_chipid == BGE_CHIPID_BCM5719_A0) { 3412 /* Jumbo frame on BCM5719 A0 does not work. */ 3413 sc->bge_flags &= ~BGE_FLAG_JUMBO; 3414 } 3415 } 3416 break; 3417 case BGE_ASICREV_BCM5755: 3418 case BGE_ASICREV_BCM5761: 3419 case BGE_ASICREV_BCM5784: 3420 case BGE_ASICREV_BCM5785: 3421 case BGE_ASICREV_BCM5787: 3422 case BGE_ASICREV_BCM57780: 3423 sc->bge_flags |= BGE_FLAG_5755_PLUS | BGE_FLAG_575X_PLUS | 3424 BGE_FLAG_5705_PLUS; 3425 break; 3426 case BGE_ASICREV_BCM5700: 3427 case BGE_ASICREV_BCM5701: 3428 case BGE_ASICREV_BCM5703: 3429 case BGE_ASICREV_BCM5704: 3430 sc->bge_flags |= BGE_FLAG_5700_FAMILY | BGE_FLAG_JUMBO; 3431 break; 3432 case BGE_ASICREV_BCM5714_A0: 3433 case BGE_ASICREV_BCM5780: 3434 case BGE_ASICREV_BCM5714: 3435 sc->bge_flags |= BGE_FLAG_5714_FAMILY | BGE_FLAG_JUMBO_STD; 3436 /* FALLTHROUGH */ 3437 case BGE_ASICREV_BCM5750: 3438 case BGE_ASICREV_BCM5752: 3439 case BGE_ASICREV_BCM5906: 3440 sc->bge_flags |= BGE_FLAG_575X_PLUS; 3441 /* FALLTHROUGH */ 3442 case BGE_ASICREV_BCM5705: 3443 sc->bge_flags |= BGE_FLAG_5705_PLUS; 3444 break; 3445 } 3446 3447 /* Identify chips with APE processor. */ 3448 switch (sc->bge_asicrev) { 3449 case BGE_ASICREV_BCM5717: 3450 case BGE_ASICREV_BCM5719: 3451 case BGE_ASICREV_BCM5720: 3452 case BGE_ASICREV_BCM5761: 3453 case BGE_ASICREV_BCM5762: 3454 sc->bge_flags |= BGE_FLAG_APE; 3455 break; 3456 } 3457 3458 /* Chips with APE need BAR2 access for APE registers/memory. */ 3459 if ((sc->bge_flags & BGE_FLAG_APE) != 0) { 3460 rid = PCIR_BAR(2); 3461 sc->bge_res2 = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 3462 RF_ACTIVE); 3463 if (sc->bge_res2 == NULL) { 3464 device_printf (sc->bge_dev, 3465 "couldn't map BAR2 memory\n"); 3466 error = ENXIO; 3467 goto fail; 3468 } 3469 3470 /* Enable APE register/memory access by host driver. */ 3471 pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4); 3472 pcistate |= BGE_PCISTATE_ALLOW_APE_CTLSPC_WR | 3473 BGE_PCISTATE_ALLOW_APE_SHMEM_WR | 3474 BGE_PCISTATE_ALLOW_APE_PSPACE_WR; 3475 pci_write_config(dev, BGE_PCI_PCISTATE, pcistate, 4); 3476 3477 bge_ape_lock_init(sc); 3478 bge_ape_read_fw_ver(sc); 3479 } 3480 3481 /* Add SYSCTLs, requires the chipset family to be set. */ 3482 bge_add_sysctls(sc); 3483 3484 /* Identify the chips that use an CPMU. */ 3485 if (BGE_IS_5717_PLUS(sc) || 3486 sc->bge_asicrev == BGE_ASICREV_BCM5784 || 3487 sc->bge_asicrev == BGE_ASICREV_BCM5761 || 3488 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 3489 sc->bge_asicrev == BGE_ASICREV_BCM57780) 3490 sc->bge_flags |= BGE_FLAG_CPMU_PRESENT; 3491 if ((sc->bge_flags & BGE_FLAG_CPMU_PRESENT) != 0) 3492 sc->bge_mi_mode = BGE_MIMODE_500KHZ_CONST; 3493 else 3494 sc->bge_mi_mode = BGE_MIMODE_BASE; 3495 /* Enable auto polling for BCM570[0-5]. */ 3496 if (BGE_IS_5700_FAMILY(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5705) 3497 sc->bge_mi_mode |= BGE_MIMODE_AUTOPOLL; 3498 3499 /* 3500 * All Broadcom controllers have 4GB boundary DMA bug. 3501 * Whenever an address crosses a multiple of the 4GB boundary 3502 * (including 4GB, 8Gb, 12Gb, etc.) and makes the transition 3503 * from 0xX_FFFF_FFFF to 0x(X+1)_0000_0000 an internal DMA 3504 * state machine will lockup and cause the device to hang. 3505 */ 3506 sc->bge_flags |= BGE_FLAG_4G_BNDRY_BUG; 3507 3508 /* BCM5755 or higher and BCM5906 have short DMA bug. */ 3509 if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906) 3510 sc->bge_flags |= BGE_FLAG_SHORT_DMA_BUG; 3511 3512 /* 3513 * BCM5719 cannot handle DMA requests for DMA segments that 3514 * have larger than 4KB in size. However the maximum DMA 3515 * segment size created in DMA tag is 4KB for TSO, so we 3516 * wouldn't encounter the issue here. 3517 */ 3518 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 3519 sc->bge_flags |= BGE_FLAG_4K_RDMA_BUG; 3520 3521 misccfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK; 3522 if (sc->bge_asicrev == BGE_ASICREV_BCM5705) { 3523 if (misccfg == BGE_MISCCFG_BOARD_ID_5788 || 3524 misccfg == BGE_MISCCFG_BOARD_ID_5788M) 3525 sc->bge_flags |= BGE_FLAG_5788; 3526 } 3527 3528 capmask = BMSR_DEFCAPMASK; 3529 if ((sc->bge_asicrev == BGE_ASICREV_BCM5703 && 3530 (misccfg == 0x4000 || misccfg == 0x8000)) || 3531 (sc->bge_asicrev == BGE_ASICREV_BCM5705 && 3532 pci_get_vendor(dev) == BCOM_VENDORID && 3533 (pci_get_device(dev) == BCOM_DEVICEID_BCM5901 || 3534 pci_get_device(dev) == BCOM_DEVICEID_BCM5901A2 || 3535 pci_get_device(dev) == BCOM_DEVICEID_BCM5705F)) || 3536 (pci_get_vendor(dev) == BCOM_VENDORID && 3537 (pci_get_device(dev) == BCOM_DEVICEID_BCM5751F || 3538 pci_get_device(dev) == BCOM_DEVICEID_BCM5753F || 3539 pci_get_device(dev) == BCOM_DEVICEID_BCM5787F)) || 3540 pci_get_device(dev) == BCOM_DEVICEID_BCM57790 || 3541 pci_get_device(dev) == BCOM_DEVICEID_BCM57791 || 3542 pci_get_device(dev) == BCOM_DEVICEID_BCM57795 || 3543 sc->bge_asicrev == BGE_ASICREV_BCM5906) { 3544 /* These chips are 10/100 only. */ 3545 capmask &= ~BMSR_EXTSTAT; 3546 sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; 3547 } 3548 3549 /* 3550 * Some controllers seem to require a special firmware to use 3551 * TSO. But the firmware is not available to FreeBSD and Linux 3552 * claims that the TSO performed by the firmware is slower than 3553 * hardware based TSO. Moreover the firmware based TSO has one 3554 * known bug which can't handle TSO if Ethernet header + IP/TCP 3555 * header is greater than 80 bytes. A workaround for the TSO 3556 * bug exist but it seems it's too expensive than not using 3557 * TSO at all. Some hardwares also have the TSO bug so limit 3558 * the TSO to the controllers that are not affected TSO issues 3559 * (e.g. 5755 or higher). 3560 */ 3561 if (BGE_IS_5717_PLUS(sc)) { 3562 /* BCM5717 requires different TSO configuration. */ 3563 sc->bge_flags |= BGE_FLAG_TSO3; 3564 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 && 3565 sc->bge_chipid == BGE_CHIPID_BCM5719_A0) { 3566 /* TSO on BCM5719 A0 does not work. */ 3567 sc->bge_flags &= ~BGE_FLAG_TSO3; 3568 } 3569 } else if (BGE_IS_5755_PLUS(sc)) { 3570 /* 3571 * BCM5754 and BCM5787 shares the same ASIC id so 3572 * explicit device id check is required. 3573 * Due to unknown reason TSO does not work on BCM5755M. 3574 */ 3575 if (pci_get_device(dev) != BCOM_DEVICEID_BCM5754 && 3576 pci_get_device(dev) != BCOM_DEVICEID_BCM5754M && 3577 pci_get_device(dev) != BCOM_DEVICEID_BCM5755M) 3578 sc->bge_flags |= BGE_FLAG_TSO; 3579 } 3580 3581 /* 3582 * Check if this is a PCI-X or PCI Express device. 3583 */ 3584 if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) { 3585 /* 3586 * Found a PCI Express capabilities register, this 3587 * must be a PCI Express device. 3588 */ 3589 sc->bge_flags |= BGE_FLAG_PCIE; 3590 sc->bge_expcap = reg; 3591 /* Extract supported maximum payload size. */ 3592 sc->bge_mps = pci_read_config(dev, sc->bge_expcap + 3593 PCIER_DEVICE_CAP, 2); 3594 sc->bge_mps = 128 << (sc->bge_mps & PCIEM_CAP_MAX_PAYLOAD); 3595 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 || 3596 sc->bge_asicrev == BGE_ASICREV_BCM5720) 3597 sc->bge_expmrq = 2048; 3598 else 3599 sc->bge_expmrq = 4096; 3600 pci_set_max_read_req(dev, sc->bge_expmrq); 3601 } else { 3602 /* 3603 * Check if the device is in PCI-X Mode. 3604 * (This bit is not valid on PCI Express controllers.) 3605 */ 3606 if (pci_find_cap(dev, PCIY_PCIX, ®) == 0) 3607 sc->bge_pcixcap = reg; 3608 if ((pci_read_config(dev, BGE_PCI_PCISTATE, 4) & 3609 BGE_PCISTATE_PCI_BUSMODE) == 0) 3610 sc->bge_flags |= BGE_FLAG_PCIX; 3611 } 3612 3613 /* 3614 * The 40bit DMA bug applies to the 5714/5715 controllers and is 3615 * not actually a MAC controller bug but an issue with the embedded 3616 * PCIe to PCI-X bridge in the device. Use 40bit DMA workaround. 3617 */ 3618 if (BGE_IS_5714_FAMILY(sc) && (sc->bge_flags & BGE_FLAG_PCIX)) 3619 sc->bge_flags |= BGE_FLAG_40BIT_BUG; 3620 /* 3621 * Some PCI-X bridges are known to trigger write reordering to 3622 * the mailbox registers. Typical phenomena is watchdog timeouts 3623 * caused by out-of-order TX completions. Enable workaround for 3624 * PCI-X devices that live behind these bridges. 3625 * Note, PCI-X controllers can run in PCI mode so we can't use 3626 * BGE_FLAG_PCIX flag to detect PCI-X controllers. 3627 */ 3628 if (sc->bge_pcixcap != 0 && bge_mbox_reorder(sc) != 0) 3629 sc->bge_flags |= BGE_FLAG_MBOX_REORDER; 3630 /* 3631 * Allocate the interrupt, using MSI if possible. These devices 3632 * support 8 MSI messages, but only the first one is used in 3633 * normal operation. 3634 */ 3635 rid = 0; 3636 if (pci_find_cap(sc->bge_dev, PCIY_MSI, ®) == 0) { 3637 sc->bge_msicap = reg; 3638 reg = 1; 3639 if (bge_can_use_msi(sc) && pci_alloc_msi(dev, ®) == 0) { 3640 rid = 1; 3641 sc->bge_flags |= BGE_FLAG_MSI; 3642 } 3643 } 3644 3645 /* 3646 * All controllers except BCM5700 supports tagged status but 3647 * we use tagged status only for MSI case on BCM5717. Otherwise 3648 * MSI on BCM5717 does not work. 3649 */ 3650#ifndef DEVICE_POLLING 3651 if (sc->bge_flags & BGE_FLAG_MSI && BGE_IS_5717_PLUS(sc)) 3652 sc->bge_flags |= BGE_FLAG_TAGGED_STATUS; 3653#endif 3654 3655 sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 3656 RF_ACTIVE | (rid != 0 ? 0 : RF_SHAREABLE)); 3657 3658 if (sc->bge_irq == NULL) { 3659 device_printf(sc->bge_dev, "couldn't map interrupt\n"); 3660 error = ENXIO; 3661 goto fail; 3662 } 3663 3664 bge_devinfo(sc); 3665 3666 sc->bge_asf_mode = 0; 3667 /* No ASF if APE present. */ 3668 if ((sc->bge_flags & BGE_FLAG_APE) == 0) { 3669 if (bge_allow_asf && (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == 3670 BGE_SRAM_DATA_SIG_MAGIC)) { 3671 if (bge_readmem_ind(sc, BGE_SRAM_DATA_CFG) & 3672 BGE_HWCFG_ASF) { 3673 sc->bge_asf_mode |= ASF_ENABLE; 3674 sc->bge_asf_mode |= ASF_STACKUP; 3675 if (BGE_IS_575X_PLUS(sc)) 3676 sc->bge_asf_mode |= ASF_NEW_HANDSHAKE; 3677 } 3678 } 3679 } 3680 3681 bge_stop_fw(sc); 3682 bge_sig_pre_reset(sc, BGE_RESET_SHUTDOWN); 3683 if (bge_reset(sc)) { 3684 device_printf(sc->bge_dev, "chip reset failed\n"); 3685 error = ENXIO; 3686 goto fail; 3687 } 3688 3689 bge_sig_legacy(sc, BGE_RESET_SHUTDOWN); 3690 bge_sig_post_reset(sc, BGE_RESET_SHUTDOWN); 3691 3692 if (bge_chipinit(sc)) { 3693 device_printf(sc->bge_dev, "chip initialization failed\n"); 3694 error = ENXIO; 3695 goto fail; 3696 } 3697 3698 error = bge_get_eaddr(sc, eaddr); 3699 if (error) { 3700 device_printf(sc->bge_dev, 3701 "failed to read station address\n"); 3702 error = ENXIO; 3703 goto fail; 3704 } 3705 3706 /* 5705 limits RX return ring to 512 entries. */ 3707 if (BGE_IS_5717_PLUS(sc)) 3708 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; 3709 else if (BGE_IS_5705_PLUS(sc)) 3710 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705; 3711 else 3712 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; 3713 3714 if (bge_dma_alloc(sc)) { 3715 device_printf(sc->bge_dev, 3716 "failed to allocate DMA resources\n"); 3717 error = ENXIO; 3718 goto fail; 3719 } 3720 3721 /* Set default tuneable values. */ 3722 sc->bge_stat_ticks = BGE_TICKS_PER_SEC; 3723 sc->bge_rx_coal_ticks = 150; 3724 sc->bge_tx_coal_ticks = 150; 3725 sc->bge_rx_max_coal_bds = 10; 3726 sc->bge_tx_max_coal_bds = 10; 3727 3728 /* Initialize checksum features to use. */ 3729 sc->bge_csum_features = BGE_CSUM_FEATURES; 3730 if (sc->bge_forced_udpcsum != 0) 3731 sc->bge_csum_features |= CSUM_UDP; 3732 3733 /* Set up ifnet structure */ 3734 ifp = sc->bge_ifp = if_alloc(IFT_ETHER); 3735 if (ifp == NULL) { 3736 device_printf(sc->bge_dev, "failed to if_alloc()\n"); 3737 error = ENXIO; 3738 goto fail; 3739 } 3740 if_setsoftc(ifp, sc); 3741 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 3742 if_setflags(ifp, IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST); 3743 if_setioctlfn(ifp, bge_ioctl); 3744 if_setstartfn(ifp, bge_start); 3745 if_setinitfn(ifp, bge_init); 3746 if_setgetcounterfn(ifp, bge_get_counter); 3747 if_setsendqlen(ifp, BGE_TX_RING_CNT - 1); 3748 if_setsendqready(ifp); 3749 if_sethwassist(ifp, sc->bge_csum_features); 3750 if_setcapabilities(ifp, IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING | 3751 IFCAP_VLAN_MTU); 3752 if ((sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) != 0) { 3753 if_sethwassistbits(ifp, CSUM_TSO, 0); 3754 if_setcapabilitiesbit(ifp, IFCAP_TSO4 | IFCAP_VLAN_HWTSO, 0); 3755 } 3756#ifdef IFCAP_VLAN_HWCSUM 3757 if_setcapabilitiesbit(ifp, IFCAP_VLAN_HWCSUM, 0); 3758#endif 3759 if_setcapenable(ifp, if_getcapabilities(ifp)); 3760#ifdef DEVICE_POLLING 3761 if_setcapabilitiesbit(ifp, IFCAP_POLLING, 0); 3762#endif 3763 3764 /* 3765 * 5700 B0 chips do not support checksumming correctly due 3766 * to hardware bugs. 3767 */ 3768 if (sc->bge_chipid == BGE_CHIPID_BCM5700_B0) { 3769 if_setcapabilitiesbit(ifp, 0, IFCAP_HWCSUM); 3770 if_setcapenablebit(ifp, 0, IFCAP_HWCSUM); 3771 if_sethwassist(ifp, 0); 3772 } 3773 3774 /* 3775 * Figure out what sort of media we have by checking the 3776 * hardware config word in the first 32k of NIC internal memory, 3777 * or fall back to examining the EEPROM if necessary. 3778 * Note: on some BCM5700 cards, this value appears to be unset. 3779 * If that's the case, we have to rely on identifying the NIC 3780 * by its PCI subsystem ID, as we do below for the SysKonnect 3781 * SK-9D41. 3782 */ 3783 if (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == BGE_SRAM_DATA_SIG_MAGIC) 3784 hwcfg = bge_readmem_ind(sc, BGE_SRAM_DATA_CFG); 3785 else if ((sc->bge_flags & BGE_FLAG_EADDR) && 3786 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 3787 if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, 3788 sizeof(hwcfg))) { 3789 device_printf(sc->bge_dev, "failed to read EEPROM\n"); 3790 error = ENXIO; 3791 goto fail; 3792 } 3793 hwcfg = ntohl(hwcfg); 3794 } 3795 3796 /* The SysKonnect SK-9D41 is a 1000baseSX card. */ 3797 if ((pci_read_config(dev, BGE_PCI_SUBSYS, 4) >> 16) == 3798 SK_SUBSYSID_9D41 || (hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER) { 3799 if (BGE_IS_5705_PLUS(sc)) { 3800 sc->bge_flags |= BGE_FLAG_MII_SERDES; 3801 sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; 3802 } else 3803 sc->bge_flags |= BGE_FLAG_TBI; 3804 } 3805 3806 /* Set various PHY bug flags. */ 3807 if (sc->bge_chipid == BGE_CHIPID_BCM5701_A0 || 3808 sc->bge_chipid == BGE_CHIPID_BCM5701_B0) 3809 sc->bge_phy_flags |= BGE_PHY_CRC_BUG; 3810 if (sc->bge_chiprev == BGE_CHIPREV_5703_AX || 3811 sc->bge_chiprev == BGE_CHIPREV_5704_AX) 3812 sc->bge_phy_flags |= BGE_PHY_ADC_BUG; 3813 if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0) 3814 sc->bge_phy_flags |= BGE_PHY_5704_A0_BUG; 3815 if (pci_get_subvendor(dev) == DELL_VENDORID) 3816 sc->bge_phy_flags |= BGE_PHY_NO_3LED; 3817 if ((BGE_IS_5705_PLUS(sc)) && 3818 sc->bge_asicrev != BGE_ASICREV_BCM5906 && 3819 sc->bge_asicrev != BGE_ASICREV_BCM5785 && 3820 sc->bge_asicrev != BGE_ASICREV_BCM57780 && 3821 !BGE_IS_5717_PLUS(sc)) { 3822 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 3823 sc->bge_asicrev == BGE_ASICREV_BCM5761 || 3824 sc->bge_asicrev == BGE_ASICREV_BCM5784 || 3825 sc->bge_asicrev == BGE_ASICREV_BCM5787) { 3826 if (pci_get_device(dev) != BCOM_DEVICEID_BCM5722 && 3827 pci_get_device(dev) != BCOM_DEVICEID_BCM5756) 3828 sc->bge_phy_flags |= BGE_PHY_JITTER_BUG; 3829 if (pci_get_device(dev) == BCOM_DEVICEID_BCM5755M) 3830 sc->bge_phy_flags |= BGE_PHY_ADJUST_TRIM; 3831 } else 3832 sc->bge_phy_flags |= BGE_PHY_BER_BUG; 3833 } 3834 3835 /* 3836 * Don't enable Ethernet@WireSpeed for the 5700 or the 3837 * 5705 A0 and A1 chips. 3838 */ 3839 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 3840 (sc->bge_asicrev == BGE_ASICREV_BCM5705 && 3841 (sc->bge_chipid != BGE_CHIPID_BCM5705_A0 && 3842 sc->bge_chipid != BGE_CHIPID_BCM5705_A1))) 3843 sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; 3844 3845 if (sc->bge_flags & BGE_FLAG_TBI) { 3846 ifmedia_init(&sc->bge_ifmedia, IFM_IMASK, bge_ifmedia_upd, 3847 bge_ifmedia_sts); 3848 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX, 0, NULL); 3849 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX | IFM_FDX, 3850 0, NULL); 3851 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL); 3852 ifmedia_set(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO); 3853 sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media; 3854 } else { 3855 /* 3856 * Do transceiver setup and tell the firmware the 3857 * driver is down so we can try to get access the 3858 * probe if ASF is running. Retry a couple of times 3859 * if we get a conflict with the ASF firmware accessing 3860 * the PHY. 3861 */ 3862 trys = 0; 3863 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 3864again: 3865 bge_asf_driver_up(sc); 3866 3867 error = mii_attach(dev, &sc->bge_miibus, ifp, 3868 (ifm_change_cb_t)bge_ifmedia_upd, 3869 (ifm_stat_cb_t)bge_ifmedia_sts, capmask, sc->bge_phy_addr, 3870 MII_OFFSET_ANY, MIIF_DOPAUSE); 3871 if (error != 0) { 3872 if (trys++ < 4) { 3873 device_printf(sc->bge_dev, "Try again\n"); 3874 bge_miibus_writereg(sc->bge_dev, 3875 sc->bge_phy_addr, MII_BMCR, BMCR_RESET); 3876 goto again; 3877 } 3878 device_printf(sc->bge_dev, "attaching PHYs failed\n"); 3879 goto fail; 3880 } 3881 3882 /* 3883 * Now tell the firmware we are going up after probing the PHY 3884 */ 3885 if (sc->bge_asf_mode & ASF_STACKUP) 3886 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 3887 } 3888 3889 /* 3890 * When using the BCM5701 in PCI-X mode, data corruption has 3891 * been observed in the first few bytes of some received packets. 3892 * Aligning the packet buffer in memory eliminates the corruption. 3893 * Unfortunately, this misaligns the packet payloads. On platforms 3894 * which do not support unaligned accesses, we will realign the 3895 * payloads by copying the received packets. 3896 */ 3897 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 3898 sc->bge_flags & BGE_FLAG_PCIX) 3899 sc->bge_flags |= BGE_FLAG_RX_ALIGNBUG; 3900 3901 /* 3902 * Call MI attach routine. 3903 */ 3904 ether_ifattach(ifp, eaddr); 3905 3906 /* Tell upper layer we support long frames. */ 3907 if_setifheaderlen(ifp, sizeof(struct ether_vlan_header)); 3908 3909 /* 3910 * Hookup IRQ last. 3911 */ 3912 if (BGE_IS_5755_PLUS(sc) && sc->bge_flags & BGE_FLAG_MSI) { 3913 /* Take advantage of single-shot MSI. */ 3914 CSR_WRITE_4(sc, BGE_MSI_MODE, CSR_READ_4(sc, BGE_MSI_MODE) & 3915 ~BGE_MSIMODE_ONE_SHOT_DISABLE); 3916 sc->bge_tq = taskqueue_create_fast("bge_taskq", M_WAITOK, 3917 taskqueue_thread_enqueue, &sc->bge_tq); 3918 if (sc->bge_tq == NULL) { 3919 device_printf(dev, "could not create taskqueue.\n"); 3920 ether_ifdetach(ifp); 3921 error = ENOMEM; 3922 goto fail; 3923 } 3924 error = taskqueue_start_threads(&sc->bge_tq, 1, PI_NET, 3925 "%s taskq", device_get_nameunit(sc->bge_dev)); 3926 if (error != 0) { 3927 device_printf(dev, "could not start threads.\n"); 3928 ether_ifdetach(ifp); 3929 goto fail; 3930 } 3931 error = bus_setup_intr(dev, sc->bge_irq, 3932 INTR_TYPE_NET | INTR_MPSAFE, bge_msi_intr, NULL, sc, 3933 &sc->bge_intrhand); 3934 } else 3935 error = bus_setup_intr(dev, sc->bge_irq, 3936 INTR_TYPE_NET | INTR_MPSAFE, NULL, bge_intr, sc, 3937 &sc->bge_intrhand); 3938 3939 if (error) { 3940 ether_ifdetach(ifp); 3941 device_printf(sc->bge_dev, "couldn't set up irq\n"); 3942 } 3943 3944fail: 3945 if (error) 3946 bge_detach(dev); 3947 return (error); 3948} 3949 3950static int 3951bge_detach(device_t dev) 3952{ 3953 struct bge_softc *sc; 3954 if_t ifp; 3955 3956 sc = device_get_softc(dev); 3957 ifp = sc->bge_ifp; 3958 3959#ifdef DEVICE_POLLING 3960 if (if_getcapenable(ifp) & IFCAP_POLLING) 3961 ether_poll_deregister(ifp); 3962#endif 3963 3964 if (device_is_attached(dev)) { 3965 ether_ifdetach(ifp); 3966 BGE_LOCK(sc); 3967 bge_stop(sc); 3968 BGE_UNLOCK(sc); 3969 callout_drain(&sc->bge_stat_ch); 3970 } 3971 3972 if (sc->bge_tq) 3973 taskqueue_drain(sc->bge_tq, &sc->bge_intr_task); 3974 3975 if (sc->bge_flags & BGE_FLAG_TBI) 3976 ifmedia_removeall(&sc->bge_ifmedia); 3977 else if (sc->bge_miibus != NULL) { 3978 bus_generic_detach(dev); 3979 device_delete_child(dev, sc->bge_miibus); 3980 } 3981 3982 bge_release_resources(sc); 3983 3984 return (0); 3985} 3986 3987static void 3988bge_release_resources(struct bge_softc *sc) 3989{ 3990 device_t dev; 3991 3992 dev = sc->bge_dev; 3993 3994 if (sc->bge_tq != NULL) 3995 taskqueue_free(sc->bge_tq); 3996 3997 if (sc->bge_intrhand != NULL) 3998 bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand); 3999 4000 if (sc->bge_irq != NULL) { 4001 bus_release_resource(dev, SYS_RES_IRQ, 4002 rman_get_rid(sc->bge_irq), sc->bge_irq); 4003 pci_release_msi(dev); 4004 } 4005 4006 if (sc->bge_res != NULL) 4007 bus_release_resource(dev, SYS_RES_MEMORY, 4008 rman_get_rid(sc->bge_res), sc->bge_res); 4009 4010 if (sc->bge_res2 != NULL) 4011 bus_release_resource(dev, SYS_RES_MEMORY, 4012 rman_get_rid(sc->bge_res2), sc->bge_res2); 4013 4014 if (sc->bge_ifp != NULL) 4015 if_free(sc->bge_ifp); 4016 4017 bge_dma_free(sc); 4018 4019 if (mtx_initialized(&sc->bge_mtx)) /* XXX */ 4020 BGE_LOCK_DESTROY(sc); 4021} 4022 4023static int 4024bge_reset(struct bge_softc *sc) 4025{ 4026 device_t dev; 4027 uint32_t cachesize, command, mac_mode, mac_mode_mask, reset, val; 4028 void (*write_op)(struct bge_softc *, int, int); 4029 uint16_t devctl; 4030 int i; 4031 4032 dev = sc->bge_dev; 4033 4034 mac_mode_mask = BGE_MACMODE_HALF_DUPLEX | BGE_MACMODE_PORTMODE; 4035 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) 4036 mac_mode_mask |= BGE_MACMODE_APE_RX_EN | BGE_MACMODE_APE_TX_EN; 4037 mac_mode = CSR_READ_4(sc, BGE_MAC_MODE) & mac_mode_mask; 4038 4039 if (BGE_IS_575X_PLUS(sc) && !BGE_IS_5714_FAMILY(sc) && 4040 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 4041 if (sc->bge_flags & BGE_FLAG_PCIE) 4042 write_op = bge_writemem_direct; 4043 else 4044 write_op = bge_writemem_ind; 4045 } else 4046 write_op = bge_writereg_ind; 4047 4048 if (sc->bge_asicrev != BGE_ASICREV_BCM5700 && 4049 sc->bge_asicrev != BGE_ASICREV_BCM5701) { 4050 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); 4051 for (i = 0; i < 8000; i++) { 4052 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & 4053 BGE_NVRAMSWARB_GNT1) 4054 break; 4055 DELAY(20); 4056 } 4057 if (i == 8000) { 4058 if (bootverbose) 4059 device_printf(dev, "NVRAM lock timedout!\n"); 4060 } 4061 } 4062 /* Take APE lock when performing reset. */ 4063 bge_ape_lock(sc, BGE_APE_LOCK_GRC); 4064 4065 /* Save some important PCI state. */ 4066 cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4); 4067 command = pci_read_config(dev, BGE_PCI_CMD, 4); 4068 4069 pci_write_config(dev, BGE_PCI_MISC_CTL, 4070 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 4071 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 4072 4073 /* Disable fastboot on controllers that support it. */ 4074 if (sc->bge_asicrev == BGE_ASICREV_BCM5752 || 4075 BGE_IS_5755_PLUS(sc)) { 4076 if (bootverbose) 4077 device_printf(dev, "Disabling fastboot\n"); 4078 CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0); 4079 } 4080 4081 /* 4082 * Write the magic number to SRAM at offset 0xB50. 4083 * When firmware finishes its initialization it will 4084 * write ~BGE_SRAM_FW_MB_MAGIC to the same location. 4085 */ 4086 bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); 4087 4088 reset = BGE_MISCCFG_RESET_CORE_CLOCKS | BGE_32BITTIME_66MHZ; 4089 4090 /* XXX: Broadcom Linux driver. */ 4091 if (sc->bge_flags & BGE_FLAG_PCIE) { 4092 if (sc->bge_asicrev != BGE_ASICREV_BCM5785 && 4093 (sc->bge_flags & BGE_FLAG_5717_PLUS) == 0) { 4094 if (CSR_READ_4(sc, 0x7E2C) == 0x60) /* PCIE 1.0 */ 4095 CSR_WRITE_4(sc, 0x7E2C, 0x20); 4096 } 4097 if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 4098 /* Prevent PCIE link training during global reset */ 4099 CSR_WRITE_4(sc, BGE_MISC_CFG, 1 << 29); 4100 reset |= 1 << 29; 4101 } 4102 } 4103 4104 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 4105 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 4106 CSR_WRITE_4(sc, BGE_VCPU_STATUS, 4107 val | BGE_VCPU_STATUS_DRV_RESET); 4108 val = CSR_READ_4(sc, BGE_VCPU_EXT_CTRL); 4109 CSR_WRITE_4(sc, BGE_VCPU_EXT_CTRL, 4110 val & ~BGE_VCPU_EXT_CTRL_HALT_CPU); 4111 } 4112 4113 /* 4114 * Set GPHY Power Down Override to leave GPHY 4115 * powered up in D0 uninitialized. 4116 */ 4117 if (BGE_IS_5705_PLUS(sc) && 4118 (sc->bge_flags & BGE_FLAG_CPMU_PRESENT) == 0) 4119 reset |= BGE_MISCCFG_GPHY_PD_OVERRIDE; 4120 4121 /* Issue global reset */ 4122 write_op(sc, BGE_MISC_CFG, reset); 4123 4124 if (sc->bge_flags & BGE_FLAG_PCIE) 4125 DELAY(100 * 1000); 4126 else 4127 DELAY(1000); 4128 4129 /* XXX: Broadcom Linux driver. */ 4130 if (sc->bge_flags & BGE_FLAG_PCIE) { 4131 if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) { 4132 DELAY(500000); /* wait for link training to complete */ 4133 val = pci_read_config(dev, 0xC4, 4); 4134 pci_write_config(dev, 0xC4, val | (1 << 15), 4); 4135 } 4136 devctl = pci_read_config(dev, 4137 sc->bge_expcap + PCIER_DEVICE_CTL, 2); 4138 /* Clear enable no snoop and disable relaxed ordering. */ 4139 devctl &= ~(PCIEM_CTL_RELAXED_ORD_ENABLE | 4140 PCIEM_CTL_NOSNOOP_ENABLE); 4141 pci_write_config(dev, sc->bge_expcap + PCIER_DEVICE_CTL, 4142 devctl, 2); 4143 pci_set_max_read_req(dev, sc->bge_expmrq); 4144 /* Clear error status. */ 4145 pci_write_config(dev, sc->bge_expcap + PCIER_DEVICE_STA, 4146 PCIEM_STA_CORRECTABLE_ERROR | 4147 PCIEM_STA_NON_FATAL_ERROR | PCIEM_STA_FATAL_ERROR | 4148 PCIEM_STA_UNSUPPORTED_REQ, 2); 4149 } 4150 4151 /* Reset some of the PCI state that got zapped by reset. */ 4152 pci_write_config(dev, BGE_PCI_MISC_CTL, 4153 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 4154 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 4155 val = BGE_PCISTATE_ROM_ENABLE | BGE_PCISTATE_ROM_RETRY_ENABLE; 4156 if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0 && 4157 (sc->bge_flags & BGE_FLAG_PCIX) != 0) 4158 val |= BGE_PCISTATE_RETRY_SAME_DMA; 4159 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) 4160 val |= BGE_PCISTATE_ALLOW_APE_CTLSPC_WR | 4161 BGE_PCISTATE_ALLOW_APE_SHMEM_WR | 4162 BGE_PCISTATE_ALLOW_APE_PSPACE_WR; 4163 pci_write_config(dev, BGE_PCI_PCISTATE, val, 4); 4164 pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4); 4165 pci_write_config(dev, BGE_PCI_CMD, command, 4); 4166 /* 4167 * Disable PCI-X relaxed ordering to ensure status block update 4168 * comes first then packet buffer DMA. Otherwise driver may 4169 * read stale status block. 4170 */ 4171 if (sc->bge_flags & BGE_FLAG_PCIX) { 4172 devctl = pci_read_config(dev, 4173 sc->bge_pcixcap + PCIXR_COMMAND, 2); 4174 devctl &= ~PCIXM_COMMAND_ERO; 4175 if (sc->bge_asicrev == BGE_ASICREV_BCM5703) { 4176 devctl &= ~PCIXM_COMMAND_MAX_READ; 4177 devctl |= PCIXM_COMMAND_MAX_READ_2048; 4178 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 4179 devctl &= ~(PCIXM_COMMAND_MAX_SPLITS | 4180 PCIXM_COMMAND_MAX_READ); 4181 devctl |= PCIXM_COMMAND_MAX_READ_2048; 4182 } 4183 pci_write_config(dev, sc->bge_pcixcap + PCIXR_COMMAND, 4184 devctl, 2); 4185 } 4186 /* Re-enable MSI, if necessary, and enable the memory arbiter. */ 4187 if (BGE_IS_5714_FAMILY(sc)) { 4188 /* This chip disables MSI on reset. */ 4189 if (sc->bge_flags & BGE_FLAG_MSI) { 4190 val = pci_read_config(dev, 4191 sc->bge_msicap + PCIR_MSI_CTRL, 2); 4192 pci_write_config(dev, 4193 sc->bge_msicap + PCIR_MSI_CTRL, 4194 val | PCIM_MSICTRL_MSI_ENABLE, 2); 4195 val = CSR_READ_4(sc, BGE_MSI_MODE); 4196 CSR_WRITE_4(sc, BGE_MSI_MODE, 4197 val | BGE_MSIMODE_ENABLE); 4198 } 4199 val = CSR_READ_4(sc, BGE_MARB_MODE); 4200 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | val); 4201 } else 4202 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 4203 4204 /* Fix up byte swapping. */ 4205 CSR_WRITE_4(sc, BGE_MODE_CTL, bge_dma_swap_options(sc)); 4206 4207 val = CSR_READ_4(sc, BGE_MAC_MODE); 4208 val = (val & ~mac_mode_mask) | mac_mode; 4209 CSR_WRITE_4(sc, BGE_MAC_MODE, val); 4210 DELAY(40); 4211 4212 bge_ape_unlock(sc, BGE_APE_LOCK_GRC); 4213 4214 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 4215 for (i = 0; i < BGE_TIMEOUT; i++) { 4216 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 4217 if (val & BGE_VCPU_STATUS_INIT_DONE) 4218 break; 4219 DELAY(100); 4220 } 4221 if (i == BGE_TIMEOUT) { 4222 device_printf(dev, "reset timed out\n"); 4223 return (1); 4224 } 4225 } else { 4226 /* 4227 * Poll until we see the 1's complement of the magic number. 4228 * This indicates that the firmware initialization is complete. 4229 * We expect this to fail if no chip containing the Ethernet 4230 * address is fitted though. 4231 */ 4232 for (i = 0; i < BGE_TIMEOUT; i++) { 4233 DELAY(10); 4234 val = bge_readmem_ind(sc, BGE_SRAM_FW_MB); 4235 if (val == ~BGE_SRAM_FW_MB_MAGIC) 4236 break; 4237 } 4238 4239 if ((sc->bge_flags & BGE_FLAG_EADDR) && i == BGE_TIMEOUT) 4240 device_printf(dev, 4241 "firmware handshake timed out, found 0x%08x\n", 4242 val); 4243 /* BCM57765 A0 needs additional time before accessing. */ 4244 if (sc->bge_chipid == BGE_CHIPID_BCM57765_A0) 4245 DELAY(10 * 1000); /* XXX */ 4246 } 4247 4248 /* 4249 * The 5704 in TBI mode apparently needs some special 4250 * adjustment to insure the SERDES drive level is set 4251 * to 1.2V. 4252 */ 4253 if (sc->bge_asicrev == BGE_ASICREV_BCM5704 && 4254 sc->bge_flags & BGE_FLAG_TBI) { 4255 val = CSR_READ_4(sc, BGE_SERDES_CFG); 4256 val = (val & ~0xFFF) | 0x880; 4257 CSR_WRITE_4(sc, BGE_SERDES_CFG, val); 4258 } 4259 4260 /* XXX: Broadcom Linux driver. */ 4261 if (sc->bge_flags & BGE_FLAG_PCIE && 4262 !BGE_IS_5717_PLUS(sc) && 4263 sc->bge_chipid != BGE_CHIPID_BCM5750_A0 && 4264 sc->bge_asicrev != BGE_ASICREV_BCM5785) { 4265 /* Enable Data FIFO protection. */ 4266 val = CSR_READ_4(sc, 0x7C00); 4267 CSR_WRITE_4(sc, 0x7C00, val | (1 << 25)); 4268 } 4269 4270 if (sc->bge_asicrev == BGE_ASICREV_BCM5720) 4271 BGE_CLRBIT(sc, BGE_CPMU_CLCK_ORIDE, 4272 CPMU_CLCK_ORIDE_MAC_ORIDE_EN); 4273 4274 return (0); 4275} 4276 4277static __inline void 4278bge_rxreuse_std(struct bge_softc *sc, int i) 4279{ 4280 struct bge_rx_bd *r; 4281 4282 r = &sc->bge_ldata.bge_rx_std_ring[sc->bge_std]; 4283 r->bge_flags = BGE_RXBDFLAG_END; 4284 r->bge_len = sc->bge_cdata.bge_rx_std_seglen[i]; 4285 r->bge_idx = i; 4286 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 4287} 4288 4289static __inline void 4290bge_rxreuse_jumbo(struct bge_softc *sc, int i) 4291{ 4292 struct bge_extrx_bd *r; 4293 4294 r = &sc->bge_ldata.bge_rx_jumbo_ring[sc->bge_jumbo]; 4295 r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; 4296 r->bge_len0 = sc->bge_cdata.bge_rx_jumbo_seglen[i][0]; 4297 r->bge_len1 = sc->bge_cdata.bge_rx_jumbo_seglen[i][1]; 4298 r->bge_len2 = sc->bge_cdata.bge_rx_jumbo_seglen[i][2]; 4299 r->bge_len3 = sc->bge_cdata.bge_rx_jumbo_seglen[i][3]; 4300 r->bge_idx = i; 4301 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 4302} 4303 4304/* 4305 * Frame reception handling. This is called if there's a frame 4306 * on the receive return list. 4307 * 4308 * Note: we have to be able to handle two possibilities here: 4309 * 1) the frame is from the jumbo receive ring 4310 * 2) the frame is from the standard receive ring 4311 */ 4312 4313static int 4314bge_rxeof(struct bge_softc *sc, uint16_t rx_prod, int holdlck) 4315{ 4316 if_t ifp; 4317 int rx_npkts = 0, stdcnt = 0, jumbocnt = 0; 4318 uint16_t rx_cons; 4319 4320 rx_cons = sc->bge_rx_saved_considx; 4321 4322 /* Nothing to do. */ 4323 if (rx_cons == rx_prod) 4324 return (rx_npkts); 4325 4326 ifp = sc->bge_ifp; 4327 4328 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 4329 sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_POSTREAD); 4330 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 4331 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_POSTWRITE); 4332 if (BGE_IS_JUMBO_CAPABLE(sc) && 4333 if_getmtu(ifp) + ETHER_HDR_LEN + ETHER_CRC_LEN + 4334 ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN)) 4335 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 4336 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_POSTWRITE); 4337 4338 while (rx_cons != rx_prod) { 4339 struct bge_rx_bd *cur_rx; 4340 uint32_t rxidx; 4341 struct mbuf *m = NULL; 4342 uint16_t vlan_tag = 0; 4343 int have_tag = 0; 4344 4345#ifdef DEVICE_POLLING 4346 if (if_getcapenable(ifp) & IFCAP_POLLING) { 4347 if (sc->rxcycles <= 0) 4348 break; 4349 sc->rxcycles--; 4350 } 4351#endif 4352 4353 cur_rx = &sc->bge_ldata.bge_rx_return_ring[rx_cons]; 4354 4355 rxidx = cur_rx->bge_idx; 4356 BGE_INC(rx_cons, sc->bge_return_ring_cnt); 4357 4358 if (if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING && 4359 cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) { 4360 have_tag = 1; 4361 vlan_tag = cur_rx->bge_vlan_tag; 4362 } 4363 4364 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) { 4365 jumbocnt++; 4366 m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx]; 4367 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 4368 bge_rxreuse_jumbo(sc, rxidx); 4369 continue; 4370 } 4371 if (bge_newbuf_jumbo(sc, rxidx) != 0) { 4372 bge_rxreuse_jumbo(sc, rxidx); 4373 if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1); 4374 continue; 4375 } 4376 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 4377 } else { 4378 stdcnt++; 4379 m = sc->bge_cdata.bge_rx_std_chain[rxidx]; 4380 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 4381 bge_rxreuse_std(sc, rxidx); 4382 continue; 4383 } 4384 if (bge_newbuf_std(sc, rxidx) != 0) { 4385 bge_rxreuse_std(sc, rxidx); 4386 if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1); 4387 continue; 4388 } 4389 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 4390 } 4391 4392 if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1); 4393#ifndef __NO_STRICT_ALIGNMENT 4394 /* 4395 * For architectures with strict alignment we must make sure 4396 * the payload is aligned. 4397 */ 4398 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) { 4399 bcopy(m->m_data, m->m_data + ETHER_ALIGN, 4400 cur_rx->bge_len); 4401 m->m_data += ETHER_ALIGN; 4402 } 4403#endif 4404 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN; 4405 m->m_pkthdr.rcvif = ifp; 4406 4407 if (if_getcapenable(ifp) & IFCAP_RXCSUM) 4408 bge_rxcsum(sc, cur_rx, m); 4409 4410 /* 4411 * If we received a packet with a vlan tag, 4412 * attach that information to the packet. 4413 */ 4414 if (have_tag) { 4415 m->m_pkthdr.ether_vtag = vlan_tag; 4416 m->m_flags |= M_VLANTAG; 4417 } 4418 4419 if (holdlck != 0) { 4420 BGE_UNLOCK(sc); 4421 if_input(ifp, m); 4422 BGE_LOCK(sc); 4423 } else 4424 if_input(ifp, m); 4425 rx_npkts++; 4426 4427 if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) 4428 return (rx_npkts); 4429 } 4430 4431 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 4432 sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_PREREAD); 4433 if (stdcnt > 0) 4434 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 4435 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); 4436 4437 if (jumbocnt > 0) 4438 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 4439 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); 4440 4441 sc->bge_rx_saved_considx = rx_cons; 4442 bge_writembx(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx); 4443 if (stdcnt) 4444 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, (sc->bge_std + 4445 BGE_STD_RX_RING_CNT - 1) % BGE_STD_RX_RING_CNT); 4446 if (jumbocnt) 4447 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, (sc->bge_jumbo + 4448 BGE_JUMBO_RX_RING_CNT - 1) % BGE_JUMBO_RX_RING_CNT); 4449#ifdef notyet 4450 /* 4451 * This register wraps very quickly under heavy packet drops. 4452 * If you need correct statistics, you can enable this check. 4453 */ 4454 if (BGE_IS_5705_PLUS(sc)) 4455 if_incierrors(ifp, CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS)); 4456#endif 4457 return (rx_npkts); 4458} 4459 4460static void 4461bge_rxcsum(struct bge_softc *sc, struct bge_rx_bd *cur_rx, struct mbuf *m) 4462{ 4463 4464 if (BGE_IS_5717_PLUS(sc)) { 4465 if ((cur_rx->bge_flags & BGE_RXBDFLAG_IPV6) == 0) { 4466 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { 4467 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 4468 if ((cur_rx->bge_error_flag & 4469 BGE_RXERRFLAG_IP_CSUM_NOK) == 0) 4470 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 4471 } 4472 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) { 4473 m->m_pkthdr.csum_data = 4474 cur_rx->bge_tcp_udp_csum; 4475 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID | 4476 CSUM_PSEUDO_HDR; 4477 } 4478 } 4479 } else { 4480 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { 4481 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 4482 if ((cur_rx->bge_ip_csum ^ 0xFFFF) == 0) 4483 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 4484 } 4485 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM && 4486 m->m_pkthdr.len >= ETHER_MIN_NOPAD) { 4487 m->m_pkthdr.csum_data = 4488 cur_rx->bge_tcp_udp_csum; 4489 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID | 4490 CSUM_PSEUDO_HDR; 4491 } 4492 } 4493} 4494 4495static void 4496bge_txeof(struct bge_softc *sc, uint16_t tx_cons) 4497{ 4498 struct bge_tx_bd *cur_tx; 4499 if_t ifp; 4500 4501 BGE_LOCK_ASSERT(sc); 4502 4503 /* Nothing to do. */ 4504 if (sc->bge_tx_saved_considx == tx_cons) 4505 return; 4506 4507 ifp = sc->bge_ifp; 4508 4509 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 4510 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_POSTWRITE); 4511 /* 4512 * Go through our tx ring and free mbufs for those 4513 * frames that have been sent. 4514 */ 4515 while (sc->bge_tx_saved_considx != tx_cons) { 4516 uint32_t idx; 4517 4518 idx = sc->bge_tx_saved_considx; 4519 cur_tx = &sc->bge_ldata.bge_tx_ring[idx]; 4520 if (cur_tx->bge_flags & BGE_TXBDFLAG_END) 4521 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 4522 if (sc->bge_cdata.bge_tx_chain[idx] != NULL) { 4523 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, 4524 sc->bge_cdata.bge_tx_dmamap[idx], 4525 BUS_DMASYNC_POSTWRITE); 4526 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, 4527 sc->bge_cdata.bge_tx_dmamap[idx]); 4528 m_freem(sc->bge_cdata.bge_tx_chain[idx]); 4529 sc->bge_cdata.bge_tx_chain[idx] = NULL; 4530 } 4531 sc->bge_txcnt--; 4532 BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT); 4533 } 4534 4535 if_setdrvflagbits(ifp, 0, IFF_DRV_OACTIVE); 4536 if (sc->bge_txcnt == 0) 4537 sc->bge_timer = 0; 4538} 4539 4540#ifdef DEVICE_POLLING 4541static int 4542bge_poll(if_t ifp, enum poll_cmd cmd, int count) 4543{ 4544 struct bge_softc *sc = if_getsoftc(ifp); 4545 uint16_t rx_prod, tx_cons; 4546 uint32_t statusword; 4547 int rx_npkts = 0; 4548 4549 BGE_LOCK(sc); 4550 if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) { 4551 BGE_UNLOCK(sc); 4552 return (rx_npkts); 4553 } 4554 4555 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4556 sc->bge_cdata.bge_status_map, 4557 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 4558 /* Fetch updates from the status block. */ 4559 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 4560 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 4561 4562 statusword = sc->bge_ldata.bge_status_block->bge_status; 4563 /* Clear the status so the next pass only sees the changes. */ 4564 sc->bge_ldata.bge_status_block->bge_status = 0; 4565 4566 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4567 sc->bge_cdata.bge_status_map, 4568 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 4569 4570 /* Note link event. It will be processed by POLL_AND_CHECK_STATUS. */ 4571 if (statusword & BGE_STATFLAG_LINKSTATE_CHANGED) 4572 sc->bge_link_evt++; 4573 4574 if (cmd == POLL_AND_CHECK_STATUS) 4575 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 4576 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 4577 sc->bge_link_evt || (sc->bge_flags & BGE_FLAG_TBI)) 4578 bge_link_upd(sc); 4579 4580 sc->rxcycles = count; 4581 rx_npkts = bge_rxeof(sc, rx_prod, 1); 4582 if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) { 4583 BGE_UNLOCK(sc); 4584 return (rx_npkts); 4585 } 4586 bge_txeof(sc, tx_cons); 4587 if (!if_sendq_empty(ifp)) 4588 bge_start_locked(ifp); 4589 4590 BGE_UNLOCK(sc); 4591 return (rx_npkts); 4592} 4593#endif /* DEVICE_POLLING */ 4594 4595static int 4596bge_msi_intr(void *arg) 4597{ 4598 struct bge_softc *sc; 4599 4600 sc = (struct bge_softc *)arg; 4601 /* 4602 * This interrupt is not shared and controller already 4603 * disabled further interrupt. 4604 */ 4605 taskqueue_enqueue(sc->bge_tq, &sc->bge_intr_task); 4606 return (FILTER_HANDLED); 4607} 4608 4609static void 4610bge_intr_task(void *arg, int pending) 4611{ 4612 struct bge_softc *sc; 4613 if_t ifp; 4614 uint32_t status, status_tag; 4615 uint16_t rx_prod, tx_cons; 4616 4617 sc = (struct bge_softc *)arg; 4618 ifp = sc->bge_ifp; 4619 4620 BGE_LOCK(sc); 4621 if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0) { 4622 BGE_UNLOCK(sc); 4623 return; 4624 } 4625 4626 /* Get updated status block. */ 4627 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4628 sc->bge_cdata.bge_status_map, 4629 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 4630 4631 /* Save producer/consumer indices. */ 4632 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 4633 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 4634 status = sc->bge_ldata.bge_status_block->bge_status; 4635 status_tag = sc->bge_ldata.bge_status_block->bge_status_tag << 24; 4636 /* Dirty the status flag. */ 4637 sc->bge_ldata.bge_status_block->bge_status = 0; 4638 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4639 sc->bge_cdata.bge_status_map, 4640 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 4641 if ((sc->bge_flags & BGE_FLAG_TAGGED_STATUS) == 0) 4642 status_tag = 0; 4643 4644 if ((status & BGE_STATFLAG_LINKSTATE_CHANGED) != 0) 4645 bge_link_upd(sc); 4646 4647 /* Let controller work. */ 4648 bge_writembx(sc, BGE_MBX_IRQ0_LO, status_tag); 4649 4650 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING && 4651 sc->bge_rx_saved_considx != rx_prod) { 4652 /* Check RX return ring producer/consumer. */ 4653 BGE_UNLOCK(sc); 4654 bge_rxeof(sc, rx_prod, 0); 4655 BGE_LOCK(sc); 4656 } 4657 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 4658 /* Check TX ring producer/consumer. */ 4659 bge_txeof(sc, tx_cons); 4660 if (!if_sendq_empty(ifp)) 4661 bge_start_locked(ifp); 4662 } 4663 BGE_UNLOCK(sc); 4664} 4665 4666static void 4667bge_intr(void *xsc) 4668{ 4669 struct bge_softc *sc; 4670 if_t ifp; 4671 uint32_t statusword; 4672 uint16_t rx_prod, tx_cons; 4673 4674 sc = xsc; 4675 4676 BGE_LOCK(sc); 4677 4678 ifp = sc->bge_ifp; 4679 4680#ifdef DEVICE_POLLING 4681 if (if_getcapenable(ifp) & IFCAP_POLLING) { 4682 BGE_UNLOCK(sc); 4683 return; 4684 } 4685#endif 4686 4687 /* 4688 * Ack the interrupt by writing something to BGE_MBX_IRQ0_LO. Don't 4689 * disable interrupts by writing nonzero like we used to, since with 4690 * our current organization this just gives complications and 4691 * pessimizations for re-enabling interrupts. We used to have races 4692 * instead of the necessary complications. Disabling interrupts 4693 * would just reduce the chance of a status update while we are 4694 * running (by switching to the interrupt-mode coalescence 4695 * parameters), but this chance is already very low so it is more 4696 * efficient to get another interrupt than prevent it. 4697 * 4698 * We do the ack first to ensure another interrupt if there is a 4699 * status update after the ack. We don't check for the status 4700 * changing later because it is more efficient to get another 4701 * interrupt than prevent it, not quite as above (not checking is 4702 * a smaller optimization than not toggling the interrupt enable, 4703 * since checking doesn't involve PCI accesses and toggling require 4704 * the status check). So toggling would probably be a pessimization 4705 * even with MSI. It would only be needed for using a task queue. 4706 */ 4707 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 4708 4709 /* 4710 * Do the mandatory PCI flush as well as get the link status. 4711 */ 4712 statusword = CSR_READ_4(sc, BGE_MAC_STS) & BGE_MACSTAT_LINK_CHANGED; 4713 4714 /* Make sure the descriptor ring indexes are coherent. */ 4715 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4716 sc->bge_cdata.bge_status_map, 4717 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 4718 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 4719 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 4720 sc->bge_ldata.bge_status_block->bge_status = 0; 4721 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4722 sc->bge_cdata.bge_status_map, 4723 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 4724 4725 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 4726 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 4727 statusword || sc->bge_link_evt) 4728 bge_link_upd(sc); 4729 4730 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 4731 /* Check RX return ring producer/consumer. */ 4732 bge_rxeof(sc, rx_prod, 1); 4733 } 4734 4735 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 4736 /* Check TX ring producer/consumer. */ 4737 bge_txeof(sc, tx_cons); 4738 } 4739 4740 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING && 4741 !if_sendq_empty(ifp)) 4742 bge_start_locked(ifp); 4743 4744 BGE_UNLOCK(sc); 4745} 4746 4747static void 4748bge_asf_driver_up(struct bge_softc *sc) 4749{ 4750 if (sc->bge_asf_mode & ASF_STACKUP) { 4751 /* Send ASF heartbeat aprox. every 2s */ 4752 if (sc->bge_asf_count) 4753 sc->bge_asf_count --; 4754 else { 4755 sc->bge_asf_count = 2; 4756 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, 4757 BGE_FW_CMD_DRV_ALIVE); 4758 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_LEN_MB, 4); 4759 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_DATA_MB, 4760 BGE_FW_HB_TIMEOUT_SEC); 4761 CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, 4762 CSR_READ_4(sc, BGE_RX_CPU_EVENT) | 4763 BGE_RX_CPU_DRV_EVENT); 4764 } 4765 } 4766} 4767 4768static void 4769bge_tick(void *xsc) 4770{ 4771 struct bge_softc *sc = xsc; 4772 struct mii_data *mii = NULL; 4773 4774 BGE_LOCK_ASSERT(sc); 4775 4776 /* Synchronize with possible callout reset/stop. */ 4777 if (callout_pending(&sc->bge_stat_ch) || 4778 !callout_active(&sc->bge_stat_ch)) 4779 return; 4780 4781 if (BGE_IS_5705_PLUS(sc)) 4782 bge_stats_update_regs(sc); 4783 else 4784 bge_stats_update(sc); 4785 4786 /* XXX Add APE heartbeat check here? */ 4787 4788 if ((sc->bge_flags & BGE_FLAG_TBI) == 0) { 4789 mii = device_get_softc(sc->bge_miibus); 4790 /* 4791 * Do not touch PHY if we have link up. This could break 4792 * IPMI/ASF mode or produce extra input errors 4793 * (extra errors was reported for bcm5701 & bcm5704). 4794 */ 4795 if (!sc->bge_link) 4796 mii_tick(mii); 4797 } else { 4798 /* 4799 * Since in TBI mode auto-polling can't be used we should poll 4800 * link status manually. Here we register pending link event 4801 * and trigger interrupt. 4802 */ 4803#ifdef DEVICE_POLLING 4804 /* In polling mode we poll link state in bge_poll(). */ 4805 if (!(if_getcapenable(sc->bge_ifp) & IFCAP_POLLING)) 4806#endif 4807 { 4808 sc->bge_link_evt++; 4809 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 4810 sc->bge_flags & BGE_FLAG_5788) 4811 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 4812 else 4813 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 4814 } 4815 } 4816 4817 bge_asf_driver_up(sc); 4818 bge_watchdog(sc); 4819 4820 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 4821} 4822 4823static void 4824bge_stats_update_regs(struct bge_softc *sc) 4825{ 4826 if_t ifp; 4827 struct bge_mac_stats *stats; 4828 uint32_t val; 4829 4830 ifp = sc->bge_ifp; 4831 stats = &sc->bge_mac_stats; 4832 4833 stats->ifHCOutOctets += 4834 CSR_READ_4(sc, BGE_TX_MAC_STATS_OCTETS); 4835 stats->etherStatsCollisions += 4836 CSR_READ_4(sc, BGE_TX_MAC_STATS_COLLS); 4837 stats->outXonSent += 4838 CSR_READ_4(sc, BGE_TX_MAC_STATS_XON_SENT); 4839 stats->outXoffSent += 4840 CSR_READ_4(sc, BGE_TX_MAC_STATS_XOFF_SENT); 4841 stats->dot3StatsInternalMacTransmitErrors += 4842 CSR_READ_4(sc, BGE_TX_MAC_STATS_ERRORS); 4843 stats->dot3StatsSingleCollisionFrames += 4844 CSR_READ_4(sc, BGE_TX_MAC_STATS_SINGLE_COLL); 4845 stats->dot3StatsMultipleCollisionFrames += 4846 CSR_READ_4(sc, BGE_TX_MAC_STATS_MULTI_COLL); 4847 stats->dot3StatsDeferredTransmissions += 4848 CSR_READ_4(sc, BGE_TX_MAC_STATS_DEFERRED); 4849 stats->dot3StatsExcessiveCollisions += 4850 CSR_READ_4(sc, BGE_TX_MAC_STATS_EXCESS_COLL); 4851 stats->dot3StatsLateCollisions += 4852 CSR_READ_4(sc, BGE_TX_MAC_STATS_LATE_COLL); 4853 stats->ifHCOutUcastPkts += 4854 CSR_READ_4(sc, BGE_TX_MAC_STATS_UCAST); 4855 stats->ifHCOutMulticastPkts += 4856 CSR_READ_4(sc, BGE_TX_MAC_STATS_MCAST); 4857 stats->ifHCOutBroadcastPkts += 4858 CSR_READ_4(sc, BGE_TX_MAC_STATS_BCAST); 4859 4860 stats->ifHCInOctets += 4861 CSR_READ_4(sc, BGE_RX_MAC_STATS_OCTESTS); 4862 stats->etherStatsFragments += 4863 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAGMENTS); 4864 stats->ifHCInUcastPkts += 4865 CSR_READ_4(sc, BGE_RX_MAC_STATS_UCAST); 4866 stats->ifHCInMulticastPkts += 4867 CSR_READ_4(sc, BGE_RX_MAC_STATS_MCAST); 4868 stats->ifHCInBroadcastPkts += 4869 CSR_READ_4(sc, BGE_RX_MAC_STATS_BCAST); 4870 stats->dot3StatsFCSErrors += 4871 CSR_READ_4(sc, BGE_RX_MAC_STATS_FCS_ERRORS); 4872 stats->dot3StatsAlignmentErrors += 4873 CSR_READ_4(sc, BGE_RX_MAC_STATS_ALGIN_ERRORS); 4874 stats->xonPauseFramesReceived += 4875 CSR_READ_4(sc, BGE_RX_MAC_STATS_XON_RCVD); 4876 stats->xoffPauseFramesReceived += 4877 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_RCVD); 4878 stats->macControlFramesReceived += 4879 CSR_READ_4(sc, BGE_RX_MAC_STATS_CTRL_RCVD); 4880 stats->xoffStateEntered += 4881 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_ENTERED); 4882 stats->dot3StatsFramesTooLong += 4883 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAME_TOO_LONG); 4884 stats->etherStatsJabbers += 4885 CSR_READ_4(sc, BGE_RX_MAC_STATS_JABBERS); 4886 stats->etherStatsUndersizePkts += 4887 CSR_READ_4(sc, BGE_RX_MAC_STATS_UNDERSIZE); 4888 4889 stats->FramesDroppedDueToFilters += 4890 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_FILTDROP); 4891 stats->DmaWriteQueueFull += 4892 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_WRQ_FULL); 4893 stats->DmaWriteHighPriQueueFull += 4894 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_HPWRQ_FULL); 4895 stats->NoMoreRxBDs += 4896 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_OUT_OF_BDS); 4897 /* 4898 * XXX 4899 * Unlike other controllers, BGE_RXLP_LOCSTAT_IFIN_DROPS 4900 * counter of BCM5717, BCM5718, BCM5719 A0 and BCM5720 A0 4901 * includes number of unwanted multicast frames. This comes 4902 * from silicon bug and known workaround to get rough(not 4903 * exact) counter is to enable interrupt on MBUF low water 4904 * attention. This can be accomplished by setting 4905 * BGE_HCCMODE_ATTN bit of BGE_HCC_MODE, 4906 * BGE_BMANMODE_LOMBUF_ATTN bit of BGE_BMAN_MODE and 4907 * BGE_MODECTL_FLOWCTL_ATTN_INTR bit of BGE_MODE_CTL. 4908 * However that change would generate more interrupts and 4909 * there are still possibilities of losing multiple frames 4910 * during BGE_MODECTL_FLOWCTL_ATTN_INTR interrupt handling. 4911 * Given that the workaround still would not get correct 4912 * counter I don't think it's worth to implement it. So 4913 * ignore reading the counter on controllers that have the 4914 * silicon bug. 4915 */ 4916 if (sc->bge_asicrev != BGE_ASICREV_BCM5717 && 4917 sc->bge_chipid != BGE_CHIPID_BCM5719_A0 && 4918 sc->bge_chipid != BGE_CHIPID_BCM5720_A0) 4919 stats->InputDiscards += 4920 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 4921 stats->InputErrors += 4922 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_ERRORS); 4923 stats->RecvThresholdHit += 4924 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_RXTHRESH_HIT); 4925 4926 if (sc->bge_flags & BGE_FLAG_RDMA_BUG) { 4927 /* 4928 * If controller transmitted more than BGE_NUM_RDMA_CHANNELS 4929 * frames, it's safe to disable workaround for DMA engine's 4930 * miscalculation of TXMBUF space. 4931 */ 4932 if (stats->ifHCOutUcastPkts + stats->ifHCOutMulticastPkts + 4933 stats->ifHCOutBroadcastPkts > BGE_NUM_RDMA_CHANNELS) { 4934 val = CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL); 4935 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 4936 val &= ~BGE_RDMA_TX_LENGTH_WA_5719; 4937 else 4938 val &= ~BGE_RDMA_TX_LENGTH_WA_5720; 4939 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, val); 4940 sc->bge_flags &= ~BGE_FLAG_RDMA_BUG; 4941 } 4942 } 4943} 4944 4945static void 4946bge_stats_clear_regs(struct bge_softc *sc) 4947{ 4948 4949 CSR_READ_4(sc, BGE_TX_MAC_STATS_OCTETS); 4950 CSR_READ_4(sc, BGE_TX_MAC_STATS_COLLS); 4951 CSR_READ_4(sc, BGE_TX_MAC_STATS_XON_SENT); 4952 CSR_READ_4(sc, BGE_TX_MAC_STATS_XOFF_SENT); 4953 CSR_READ_4(sc, BGE_TX_MAC_STATS_ERRORS); 4954 CSR_READ_4(sc, BGE_TX_MAC_STATS_SINGLE_COLL); 4955 CSR_READ_4(sc, BGE_TX_MAC_STATS_MULTI_COLL); 4956 CSR_READ_4(sc, BGE_TX_MAC_STATS_DEFERRED); 4957 CSR_READ_4(sc, BGE_TX_MAC_STATS_EXCESS_COLL); 4958 CSR_READ_4(sc, BGE_TX_MAC_STATS_LATE_COLL); 4959 CSR_READ_4(sc, BGE_TX_MAC_STATS_UCAST); 4960 CSR_READ_4(sc, BGE_TX_MAC_STATS_MCAST); 4961 CSR_READ_4(sc, BGE_TX_MAC_STATS_BCAST); 4962 4963 CSR_READ_4(sc, BGE_RX_MAC_STATS_OCTESTS); 4964 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAGMENTS); 4965 CSR_READ_4(sc, BGE_RX_MAC_STATS_UCAST); 4966 CSR_READ_4(sc, BGE_RX_MAC_STATS_MCAST); 4967 CSR_READ_4(sc, BGE_RX_MAC_STATS_BCAST); 4968 CSR_READ_4(sc, BGE_RX_MAC_STATS_FCS_ERRORS); 4969 CSR_READ_4(sc, BGE_RX_MAC_STATS_ALGIN_ERRORS); 4970 CSR_READ_4(sc, BGE_RX_MAC_STATS_XON_RCVD); 4971 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_RCVD); 4972 CSR_READ_4(sc, BGE_RX_MAC_STATS_CTRL_RCVD); 4973 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_ENTERED); 4974 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAME_TOO_LONG); 4975 CSR_READ_4(sc, BGE_RX_MAC_STATS_JABBERS); 4976 CSR_READ_4(sc, BGE_RX_MAC_STATS_UNDERSIZE); 4977 4978 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_FILTDROP); 4979 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_WRQ_FULL); 4980 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_HPWRQ_FULL); 4981 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_OUT_OF_BDS); 4982 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 4983 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_ERRORS); 4984 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_RXTHRESH_HIT); 4985} 4986 4987static void 4988bge_stats_update(struct bge_softc *sc) 4989{ 4990 if_t ifp; 4991 bus_size_t stats; 4992 uint32_t cnt; /* current register value */ 4993 4994 ifp = sc->bge_ifp; 4995 4996 stats = BGE_MEMWIN_START + BGE_STATS_BLOCK; 4997 4998#define READ_STAT(sc, stats, stat) \ 4999 CSR_READ_4(sc, stats + offsetof(struct bge_stats, stat)) 5000 5001 cnt = READ_STAT(sc, stats, txstats.etherStatsCollisions.bge_addr_lo); 5002 if_inc_counter(ifp, IFCOUNTER_COLLISIONS, cnt - sc->bge_tx_collisions); 5003 sc->bge_tx_collisions = cnt; 5004 5005 cnt = READ_STAT(sc, stats, nicNoMoreRxBDs.bge_addr_lo); 5006 if_inc_counter(ifp, IFCOUNTER_IERRORS, cnt - sc->bge_rx_nobds); 5007 sc->bge_rx_nobds = cnt; 5008 cnt = READ_STAT(sc, stats, ifInErrors.bge_addr_lo); 5009 if_inc_counter(ifp, IFCOUNTER_IERRORS, cnt - sc->bge_rx_inerrs); 5010 sc->bge_rx_inerrs = cnt; 5011 cnt = READ_STAT(sc, stats, ifInDiscards.bge_addr_lo); 5012 if_inc_counter(ifp, IFCOUNTER_IERRORS, cnt - sc->bge_rx_discards); 5013 sc->bge_rx_discards = cnt; 5014 5015 cnt = READ_STAT(sc, stats, txstats.ifOutDiscards.bge_addr_lo); 5016 if_inc_counter(ifp, IFCOUNTER_OERRORS, cnt - sc->bge_tx_discards); 5017 sc->bge_tx_discards = cnt; 5018 5019#undef READ_STAT 5020} 5021 5022/* 5023 * Pad outbound frame to ETHER_MIN_NOPAD for an unusual reason. 5024 * The bge hardware will pad out Tx runts to ETHER_MIN_NOPAD, 5025 * but when such padded frames employ the bge IP/TCP checksum offload, 5026 * the hardware checksum assist gives incorrect results (possibly 5027 * from incorporating its own padding into the UDP/TCP checksum; who knows). 5028 * If we pad such runts with zeros, the onboard checksum comes out correct. 5029 */ 5030static __inline int 5031bge_cksum_pad(struct mbuf *m) 5032{ 5033 int padlen = ETHER_MIN_NOPAD - m->m_pkthdr.len; 5034 struct mbuf *last; 5035 5036 /* If there's only the packet-header and we can pad there, use it. */ 5037 if (m->m_pkthdr.len == m->m_len && M_WRITABLE(m) && 5038 M_TRAILINGSPACE(m) >= padlen) { 5039 last = m; 5040 } else { 5041 /* 5042 * Walk packet chain to find last mbuf. We will either 5043 * pad there, or append a new mbuf and pad it. 5044 */ 5045 for (last = m; last->m_next != NULL; last = last->m_next); 5046 if (!(M_WRITABLE(last) && M_TRAILINGSPACE(last) >= padlen)) { 5047 /* Allocate new empty mbuf, pad it. Compact later. */ 5048 struct mbuf *n; 5049 5050 MGET(n, M_NOWAIT, MT_DATA); 5051 if (n == NULL) 5052 return (ENOBUFS); 5053 n->m_len = 0; 5054 last->m_next = n; 5055 last = n; 5056 } 5057 } 5058 5059 /* Now zero the pad area, to avoid the bge cksum-assist bug. */ 5060 memset(mtod(last, caddr_t) + last->m_len, 0, padlen); 5061 last->m_len += padlen; 5062 m->m_pkthdr.len += padlen; 5063 5064 return (0); 5065} 5066 5067static struct mbuf * 5068bge_check_short_dma(struct mbuf *m) 5069{ 5070 struct mbuf *n; 5071 int found; 5072 5073 /* 5074 * If device receive two back-to-back send BDs with less than 5075 * or equal to 8 total bytes then the device may hang. The two 5076 * back-to-back send BDs must in the same frame for this failure 5077 * to occur. Scan mbuf chains and see whether two back-to-back 5078 * send BDs are there. If this is the case, allocate new mbuf 5079 * and copy the frame to workaround the silicon bug. 5080 */ 5081 for (n = m, found = 0; n != NULL; n = n->m_next) { 5082 if (n->m_len < 8) { 5083 found++; 5084 if (found > 1) 5085 break; 5086 continue; 5087 } 5088 found = 0; 5089 } 5090 5091 if (found > 1) { 5092 n = m_defrag(m, M_NOWAIT); 5093 if (n == NULL) 5094 m_freem(m); 5095 } else 5096 n = m; 5097 return (n); 5098} 5099 5100static struct mbuf * 5101bge_setup_tso(struct bge_softc *sc, struct mbuf *m, uint16_t *mss, 5102 uint16_t *flags) 5103{ 5104 struct ip *ip; 5105 struct tcphdr *tcp; 5106 struct mbuf *n; 5107 uint16_t hlen; 5108 uint32_t poff; 5109 5110 if (M_WRITABLE(m) == 0) { 5111 /* Get a writable copy. */ 5112 n = m_dup(m, M_NOWAIT); 5113 m_freem(m); 5114 if (n == NULL) 5115 return (NULL); 5116 m = n; 5117 } 5118 m = m_pullup(m, sizeof(struct ether_header) + sizeof(struct ip)); 5119 if (m == NULL) 5120 return (NULL); 5121 ip = (struct ip *)(mtod(m, char *) + sizeof(struct ether_header)); 5122 poff = sizeof(struct ether_header) + (ip->ip_hl << 2); 5123 m = m_pullup(m, poff + sizeof(struct tcphdr)); 5124 if (m == NULL) 5125 return (NULL); 5126 tcp = (struct tcphdr *)(mtod(m, char *) + poff); 5127 m = m_pullup(m, poff + (tcp->th_off << 2)); 5128 if (m == NULL) 5129 return (NULL); 5130 /* 5131 * It seems controller doesn't modify IP length and TCP pseudo 5132 * checksum. These checksum computed by upper stack should be 0. 5133 */ 5134 *mss = m->m_pkthdr.tso_segsz; 5135 ip = (struct ip *)(mtod(m, char *) + sizeof(struct ether_header)); 5136 ip->ip_sum = 0; 5137 ip->ip_len = htons(*mss + (ip->ip_hl << 2) + (tcp->th_off << 2)); 5138 /* Clear pseudo checksum computed by TCP stack. */ 5139 tcp = (struct tcphdr *)(mtod(m, char *) + poff); 5140 tcp->th_sum = 0; 5141 /* 5142 * Broadcom controllers uses different descriptor format for 5143 * TSO depending on ASIC revision. Due to TSO-capable firmware 5144 * license issue and lower performance of firmware based TSO 5145 * we only support hardware based TSO. 5146 */ 5147 /* Calculate header length, incl. TCP/IP options, in 32 bit units. */ 5148 hlen = ((ip->ip_hl << 2) + (tcp->th_off << 2)) >> 2; 5149 if (sc->bge_flags & BGE_FLAG_TSO3) { 5150 /* 5151 * For BCM5717 and newer controllers, hardware based TSO 5152 * uses the 14 lower bits of the bge_mss field to store the 5153 * MSS and the upper 2 bits to store the lowest 2 bits of 5154 * the IP/TCP header length. The upper 6 bits of the header 5155 * length are stored in the bge_flags[14:10,4] field. Jumbo 5156 * frames are supported. 5157 */ 5158 *mss |= ((hlen & 0x3) << 14); 5159 *flags |= ((hlen & 0xF8) << 7) | ((hlen & 0x4) << 2); 5160 } else { 5161 /* 5162 * For BCM5755 and newer controllers, hardware based TSO uses 5163 * the lower 11 bits to store the MSS and the upper 5 bits to 5164 * store the IP/TCP header length. Jumbo frames are not 5165 * supported. 5166 */ 5167 *mss |= (hlen << 11); 5168 } 5169 return (m); 5170} 5171 5172/* 5173 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data 5174 * pointers to descriptors. 5175 */ 5176static int 5177bge_encap(struct bge_softc *sc, struct mbuf **m_head, uint32_t *txidx) 5178{ 5179 bus_dma_segment_t segs[BGE_NSEG_NEW]; 5180 bus_dmamap_t map; 5181 struct bge_tx_bd *d; 5182 struct mbuf *m = *m_head; 5183 uint32_t idx = *txidx; 5184 uint16_t csum_flags, mss, vlan_tag; 5185 int nsegs, i, error; 5186 5187 csum_flags = 0; 5188 mss = 0; 5189 vlan_tag = 0; 5190 if ((sc->bge_flags & BGE_FLAG_SHORT_DMA_BUG) != 0 && 5191 m->m_next != NULL) { 5192 *m_head = bge_check_short_dma(m); 5193 if (*m_head == NULL) 5194 return (ENOBUFS); 5195 m = *m_head; 5196 } 5197 if ((m->m_pkthdr.csum_flags & CSUM_TSO) != 0) { 5198 *m_head = m = bge_setup_tso(sc, m, &mss, &csum_flags); 5199 if (*m_head == NULL) 5200 return (ENOBUFS); 5201 csum_flags |= BGE_TXBDFLAG_CPU_PRE_DMA | 5202 BGE_TXBDFLAG_CPU_POST_DMA; 5203 } else if ((m->m_pkthdr.csum_flags & sc->bge_csum_features) != 0) { 5204 if (m->m_pkthdr.csum_flags & CSUM_IP) 5205 csum_flags |= BGE_TXBDFLAG_IP_CSUM; 5206 if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)) { 5207 csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM; 5208 if (m->m_pkthdr.len < ETHER_MIN_NOPAD && 5209 (error = bge_cksum_pad(m)) != 0) { 5210 m_freem(m); 5211 *m_head = NULL; 5212 return (error); 5213 } 5214 } 5215 } 5216 5217 if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0) { 5218 if (sc->bge_flags & BGE_FLAG_JUMBO_FRAME && 5219 m->m_pkthdr.len > ETHER_MAX_LEN) 5220 csum_flags |= BGE_TXBDFLAG_JUMBO_FRAME; 5221 if (sc->bge_forced_collapse > 0 && 5222 (sc->bge_flags & BGE_FLAG_PCIE) != 0 && m->m_next != NULL) { 5223 /* 5224 * Forcedly collapse mbuf chains to overcome hardware 5225 * limitation which only support a single outstanding 5226 * DMA read operation. 5227 */ 5228 if (sc->bge_forced_collapse == 1) 5229 m = m_defrag(m, M_NOWAIT); 5230 else 5231 m = m_collapse(m, M_NOWAIT, 5232 sc->bge_forced_collapse); 5233 if (m == NULL) 5234 m = *m_head; 5235 *m_head = m; 5236 } 5237 } 5238 5239 map = sc->bge_cdata.bge_tx_dmamap[idx]; 5240 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, m, segs, 5241 &nsegs, BUS_DMA_NOWAIT); 5242 if (error == EFBIG) { 5243 m = m_collapse(m, M_NOWAIT, BGE_NSEG_NEW); 5244 if (m == NULL) { 5245 m_freem(*m_head); 5246 *m_head = NULL; 5247 return (ENOBUFS); 5248 } 5249 *m_head = m; 5250 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, 5251 m, segs, &nsegs, BUS_DMA_NOWAIT); 5252 if (error) { 5253 m_freem(m); 5254 *m_head = NULL; 5255 return (error); 5256 } 5257 } else if (error != 0) 5258 return (error); 5259 5260 /* Check if we have enough free send BDs. */ 5261 if (sc->bge_txcnt + nsegs >= BGE_TX_RING_CNT) { 5262 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, map); 5263 return (ENOBUFS); 5264 } 5265 5266 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, map, BUS_DMASYNC_PREWRITE); 5267 5268 if (m->m_flags & M_VLANTAG) { 5269 csum_flags |= BGE_TXBDFLAG_VLAN_TAG; 5270 vlan_tag = m->m_pkthdr.ether_vtag; 5271 } 5272 5273 if (sc->bge_asicrev == BGE_ASICREV_BCM5762 && 5274 (m->m_pkthdr.csum_flags & CSUM_TSO) != 0) { 5275 /* 5276 * 5725 family of devices corrupts TSO packets when TSO DMA 5277 * buffers cross into regions which are within MSS bytes of 5278 * a 4GB boundary. If we encounter the condition, drop the 5279 * packet. 5280 */ 5281 for (i = 0; ; i++) { 5282 d = &sc->bge_ldata.bge_tx_ring[idx]; 5283 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr); 5284 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr); 5285 d->bge_len = segs[i].ds_len; 5286 if (d->bge_addr.bge_addr_lo + segs[i].ds_len + mss < 5287 d->bge_addr.bge_addr_lo) 5288 break; 5289 d->bge_flags = csum_flags; 5290 d->bge_vlan_tag = vlan_tag; 5291 d->bge_mss = mss; 5292 if (i == nsegs - 1) 5293 break; 5294 BGE_INC(idx, BGE_TX_RING_CNT); 5295 } 5296 if (i != nsegs - 1) { 5297 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, map, 5298 BUS_DMASYNC_POSTWRITE); 5299 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, map); 5300 m_freem(*m_head); 5301 *m_head = NULL; 5302 return (EIO); 5303 } 5304 } else { 5305 for (i = 0; ; i++) { 5306 d = &sc->bge_ldata.bge_tx_ring[idx]; 5307 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr); 5308 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr); 5309 d->bge_len = segs[i].ds_len; 5310 d->bge_flags = csum_flags; 5311 d->bge_vlan_tag = vlan_tag; 5312 d->bge_mss = mss; 5313 if (i == nsegs - 1) 5314 break; 5315 BGE_INC(idx, BGE_TX_RING_CNT); 5316 } 5317 } 5318 5319 /* Mark the last segment as end of packet... */ 5320 d->bge_flags |= BGE_TXBDFLAG_END; 5321 5322 /* 5323 * Insure that the map for this transmission 5324 * is placed at the array index of the last descriptor 5325 * in this chain. 5326 */ 5327 sc->bge_cdata.bge_tx_dmamap[*txidx] = sc->bge_cdata.bge_tx_dmamap[idx]; 5328 sc->bge_cdata.bge_tx_dmamap[idx] = map; 5329 sc->bge_cdata.bge_tx_chain[idx] = m; 5330 sc->bge_txcnt += nsegs; 5331 5332 BGE_INC(idx, BGE_TX_RING_CNT); 5333 *txidx = idx; 5334 5335 return (0); 5336} 5337 5338/* 5339 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 5340 * to the mbuf data regions directly in the transmit descriptors. 5341 */ 5342static void 5343bge_start_locked(if_t ifp) 5344{ 5345 struct bge_softc *sc; 5346 struct mbuf *m_head; 5347 uint32_t prodidx; 5348 int count; 5349 5350 sc = if_getsoftc(ifp); 5351 BGE_LOCK_ASSERT(sc); 5352 5353 if (!sc->bge_link || 5354 (if_getdrvflags(ifp) & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 5355 IFF_DRV_RUNNING) 5356 return; 5357 5358 prodidx = sc->bge_tx_prodidx; 5359 5360 for (count = 0; !if_sendq_empty(ifp);) { 5361 if (sc->bge_txcnt > BGE_TX_RING_CNT - 16) { 5362 if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0); 5363 break; 5364 } 5365 m_head = if_dequeue(ifp); 5366 if (m_head == NULL) 5367 break; 5368 5369 /* 5370 * Pack the data into the transmit ring. If we 5371 * don't have room, set the OACTIVE flag and wait 5372 * for the NIC to drain the ring. 5373 */ 5374 if (bge_encap(sc, &m_head, &prodidx)) { 5375 if (m_head == NULL) 5376 break; 5377 if_sendq_prepend(ifp, m_head); 5378 if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0); 5379 break; 5380 } 5381 ++count; 5382 5383 /* 5384 * If there's a BPF listener, bounce a copy of this frame 5385 * to him. 5386 */ 5387 if_bpfmtap(ifp, m_head); 5388 } 5389 5390 if (count > 0) { 5391 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 5392 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); 5393 /* Transmit. */ 5394 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 5395 /* 5700 b2 errata */ 5396 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 5397 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 5398 5399 sc->bge_tx_prodidx = prodidx; 5400 5401 /* 5402 * Set a timeout in case the chip goes out to lunch. 5403 */ 5404 sc->bge_timer = BGE_TX_TIMEOUT; 5405 } 5406} 5407 5408/* 5409 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 5410 * to the mbuf data regions directly in the transmit descriptors. 5411 */ 5412static void 5413bge_start(if_t ifp) 5414{ 5415 struct bge_softc *sc; 5416 5417 sc = if_getsoftc(ifp); 5418 BGE_LOCK(sc); 5419 bge_start_locked(ifp); 5420 BGE_UNLOCK(sc); 5421} 5422 5423static void 5424bge_init_locked(struct bge_softc *sc) 5425{ 5426 if_t ifp; 5427 uint16_t *m; 5428 uint32_t mode; 5429 5430 BGE_LOCK_ASSERT(sc); 5431 5432 ifp = sc->bge_ifp; 5433 5434 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) 5435 return; 5436 5437 /* Cancel pending I/O and flush buffers. */ 5438 bge_stop(sc); 5439 5440 bge_stop_fw(sc); 5441 bge_sig_pre_reset(sc, BGE_RESET_START); 5442 bge_reset(sc); 5443 bge_sig_legacy(sc, BGE_RESET_START); 5444 bge_sig_post_reset(sc, BGE_RESET_START); 5445 5446 bge_chipinit(sc); 5447 5448 /* 5449 * Init the various state machines, ring 5450 * control blocks and firmware. 5451 */ 5452 if (bge_blockinit(sc)) { 5453 device_printf(sc->bge_dev, "initialization failure\n"); 5454 return; 5455 } 5456 5457 ifp = sc->bge_ifp; 5458 5459 /* Specify MTU. */ 5460 CSR_WRITE_4(sc, BGE_RX_MTU, if_getmtu(ifp) + 5461 ETHER_HDR_LEN + ETHER_CRC_LEN + 5462 (if_getcapenable(ifp) & IFCAP_VLAN_MTU ? ETHER_VLAN_ENCAP_LEN : 0)); 5463 5464 /* Load our MAC address. */ 5465 m = (uint16_t *)IF_LLADDR(sc->bge_ifp); 5466 CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0])); 5467 CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2])); 5468 5469 /* Program promiscuous mode. */ 5470 bge_setpromisc(sc); 5471 5472 /* Program multicast filter. */ 5473 bge_setmulti(sc); 5474 5475 /* Program VLAN tag stripping. */ 5476 bge_setvlan(sc); 5477 5478 /* Override UDP checksum offloading. */ 5479 if (sc->bge_forced_udpcsum == 0) 5480 sc->bge_csum_features &= ~CSUM_UDP; 5481 else 5482 sc->bge_csum_features |= CSUM_UDP; 5483 if (if_getcapabilities(ifp) & IFCAP_TXCSUM && 5484 if_getcapenable(ifp) & IFCAP_TXCSUM) { 5485 if_sethwassistbits(ifp, 0, (BGE_CSUM_FEATURES | CSUM_UDP)); 5486 if_sethwassistbits(ifp, sc->bge_csum_features, 0); 5487 } 5488 5489 /* Init RX ring. */ 5490 if (bge_init_rx_ring_std(sc) != 0) { 5491 device_printf(sc->bge_dev, "no memory for std Rx buffers.\n"); 5492 bge_stop(sc); 5493 return; 5494 } 5495 5496 /* 5497 * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's 5498 * memory to insure that the chip has in fact read the first 5499 * entry of the ring. 5500 */ 5501 if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) { 5502 uint32_t v, i; 5503 for (i = 0; i < 10; i++) { 5504 DELAY(20); 5505 v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8); 5506 if (v == (MCLBYTES - ETHER_ALIGN)) 5507 break; 5508 } 5509 if (i == 10) 5510 device_printf (sc->bge_dev, 5511 "5705 A0 chip failed to load RX ring\n"); 5512 } 5513 5514 /* Init jumbo RX ring. */ 5515 if (BGE_IS_JUMBO_CAPABLE(sc) && 5516 if_getmtu(ifp) + ETHER_HDR_LEN + ETHER_CRC_LEN + 5517 ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN)) { 5518 if (bge_init_rx_ring_jumbo(sc) != 0) { 5519 device_printf(sc->bge_dev, 5520 "no memory for jumbo Rx buffers.\n"); 5521 bge_stop(sc); 5522 return; 5523 } 5524 } 5525 5526 /* Init our RX return ring index. */ 5527 sc->bge_rx_saved_considx = 0; 5528 5529 /* Init our RX/TX stat counters. */ 5530 sc->bge_rx_discards = sc->bge_tx_discards = sc->bge_tx_collisions = 0; 5531 5532 /* Init TX ring. */ 5533 bge_init_tx_ring(sc); 5534 5535 /* Enable TX MAC state machine lockup fix. */ 5536 mode = CSR_READ_4(sc, BGE_TX_MODE); 5537 if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906) 5538 mode |= BGE_TXMODE_MBUF_LOCKUP_FIX; 5539 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 5540 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 5541 mode &= ~(BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE); 5542 mode |= CSR_READ_4(sc, BGE_TX_MODE) & 5543 (BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE); 5544 } 5545 /* Turn on transmitter. */ 5546 CSR_WRITE_4(sc, BGE_TX_MODE, mode | BGE_TXMODE_ENABLE); 5547 DELAY(100); 5548 5549 /* Turn on receiver. */ 5550 mode = CSR_READ_4(sc, BGE_RX_MODE); 5551 if (BGE_IS_5755_PLUS(sc)) 5552 mode |= BGE_RXMODE_IPV6_ENABLE; 5553 if (sc->bge_asicrev == BGE_ASICREV_BCM5762) 5554 mode |= BGE_RXMODE_IPV4_FRAG_FIX; 5555 CSR_WRITE_4(sc,BGE_RX_MODE, mode | BGE_RXMODE_ENABLE); 5556 DELAY(10); 5557 5558 /* 5559 * Set the number of good frames to receive after RX MBUF 5560 * Low Watermark has been reached. After the RX MAC receives 5561 * this number of frames, it will drop subsequent incoming 5562 * frames until the MBUF High Watermark is reached. 5563 */ 5564 if (BGE_IS_57765_PLUS(sc)) 5565 CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 1); 5566 else 5567 CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 2); 5568 5569 /* Clear MAC statistics. */ 5570 if (BGE_IS_5705_PLUS(sc)) 5571 bge_stats_clear_regs(sc); 5572 5573 /* Tell firmware we're alive. */ 5574 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 5575 5576#ifdef DEVICE_POLLING 5577 /* Disable interrupts if we are polling. */ 5578 if (if_getcapenable(ifp) & IFCAP_POLLING) { 5579 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 5580 BGE_PCIMISCCTL_MASK_PCI_INTR); 5581 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 5582 } else 5583#endif 5584 5585 /* Enable host interrupts. */ 5586 { 5587 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA); 5588 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 5589 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 5590 } 5591 5592 if_setdrvflagbits(ifp, IFF_DRV_RUNNING, 0); 5593 if_setdrvflagbits(ifp, 0, IFF_DRV_OACTIVE); 5594 5595 bge_ifmedia_upd_locked(ifp); 5596 5597 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 5598} 5599 5600static void 5601bge_init(void *xsc) 5602{ 5603 struct bge_softc *sc = xsc; 5604 5605 BGE_LOCK(sc); 5606 bge_init_locked(sc); 5607 BGE_UNLOCK(sc); 5608} 5609 5610/* 5611 * Set media options. 5612 */ 5613static int 5614bge_ifmedia_upd(if_t ifp) 5615{ 5616 struct bge_softc *sc = if_getsoftc(ifp); 5617 int res; 5618 5619 BGE_LOCK(sc); 5620 res = bge_ifmedia_upd_locked(ifp); 5621 BGE_UNLOCK(sc); 5622 5623 return (res); 5624} 5625 5626static int 5627bge_ifmedia_upd_locked(if_t ifp) 5628{ 5629 struct bge_softc *sc = if_getsoftc(ifp); 5630 struct mii_data *mii; 5631 struct mii_softc *miisc; 5632 struct ifmedia *ifm; 5633 5634 BGE_LOCK_ASSERT(sc); 5635 5636 ifm = &sc->bge_ifmedia; 5637 5638 /* If this is a 1000baseX NIC, enable the TBI port. */ 5639 if (sc->bge_flags & BGE_FLAG_TBI) { 5640 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) 5641 return (EINVAL); 5642 switch(IFM_SUBTYPE(ifm->ifm_media)) { 5643 case IFM_AUTO: 5644 /* 5645 * The BCM5704 ASIC appears to have a special 5646 * mechanism for programming the autoneg 5647 * advertisement registers in TBI mode. 5648 */ 5649 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 5650 uint32_t sgdig; 5651 sgdig = CSR_READ_4(sc, BGE_SGDIG_STS); 5652 if (sgdig & BGE_SGDIGSTS_DONE) { 5653 CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0); 5654 sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG); 5655 sgdig |= BGE_SGDIGCFG_AUTO | 5656 BGE_SGDIGCFG_PAUSE_CAP | 5657 BGE_SGDIGCFG_ASYM_PAUSE; 5658 CSR_WRITE_4(sc, BGE_SGDIG_CFG, 5659 sgdig | BGE_SGDIGCFG_SEND); 5660 DELAY(5); 5661 CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig); 5662 } 5663 } 5664 break; 5665 case IFM_1000_SX: 5666 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) { 5667 BGE_CLRBIT(sc, BGE_MAC_MODE, 5668 BGE_MACMODE_HALF_DUPLEX); 5669 } else { 5670 BGE_SETBIT(sc, BGE_MAC_MODE, 5671 BGE_MACMODE_HALF_DUPLEX); 5672 } 5673 DELAY(40); 5674 break; 5675 default: 5676 return (EINVAL); 5677 } 5678 return (0); 5679 } 5680 5681 sc->bge_link_evt++; 5682 mii = device_get_softc(sc->bge_miibus); 5683 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) 5684 PHY_RESET(miisc); 5685 mii_mediachg(mii); 5686 5687 /* 5688 * Force an interrupt so that we will call bge_link_upd 5689 * if needed and clear any pending link state attention. 5690 * Without this we are not getting any further interrupts 5691 * for link state changes and thus will not UP the link and 5692 * not be able to send in bge_start_locked. The only 5693 * way to get things working was to receive a packet and 5694 * get an RX intr. 5695 * bge_tick should help for fiber cards and we might not 5696 * need to do this here if BGE_FLAG_TBI is set but as 5697 * we poll for fiber anyway it should not harm. 5698 */ 5699 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 5700 sc->bge_flags & BGE_FLAG_5788) 5701 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 5702 else 5703 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 5704 5705 return (0); 5706} 5707 5708/* 5709 * Report current media status. 5710 */ 5711static void 5712bge_ifmedia_sts(if_t ifp, struct ifmediareq *ifmr) 5713{ 5714 struct bge_softc *sc = if_getsoftc(ifp); 5715 struct mii_data *mii; 5716 5717 BGE_LOCK(sc); 5718 5719 if ((if_getflags(ifp) & IFF_UP) == 0) { 5720 BGE_UNLOCK(sc); 5721 return; 5722 } 5723 if (sc->bge_flags & BGE_FLAG_TBI) { 5724 ifmr->ifm_status = IFM_AVALID; 5725 ifmr->ifm_active = IFM_ETHER; 5726 if (CSR_READ_4(sc, BGE_MAC_STS) & 5727 BGE_MACSTAT_TBI_PCS_SYNCHED) 5728 ifmr->ifm_status |= IFM_ACTIVE; 5729 else { 5730 ifmr->ifm_active |= IFM_NONE; 5731 BGE_UNLOCK(sc); 5732 return; 5733 } 5734 ifmr->ifm_active |= IFM_1000_SX; 5735 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX) 5736 ifmr->ifm_active |= IFM_HDX; 5737 else 5738 ifmr->ifm_active |= IFM_FDX; 5739 BGE_UNLOCK(sc); 5740 return; 5741 } 5742 5743 mii = device_get_softc(sc->bge_miibus); 5744 mii_pollstat(mii); 5745 ifmr->ifm_active = mii->mii_media_active; 5746 ifmr->ifm_status = mii->mii_media_status; 5747 5748 BGE_UNLOCK(sc); 5749} 5750 5751static int 5752bge_ioctl(if_t ifp, u_long command, caddr_t data) 5753{ 5754 struct bge_softc *sc = if_getsoftc(ifp); 5755 struct ifreq *ifr = (struct ifreq *) data; 5756 struct mii_data *mii; 5757 int flags, mask, error = 0; 5758 5759 switch (command) { 5760 case SIOCSIFMTU: 5761 if (BGE_IS_JUMBO_CAPABLE(sc) || 5762 (sc->bge_flags & BGE_FLAG_JUMBO_STD)) { 5763 if (ifr->ifr_mtu < ETHERMIN || 5764 ifr->ifr_mtu > BGE_JUMBO_MTU) { 5765 error = EINVAL; 5766 break; 5767 } 5768 } else if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU) { 5769 error = EINVAL; 5770 break; 5771 } 5772 BGE_LOCK(sc); 5773 if (if_getmtu(ifp) != ifr->ifr_mtu) { 5774 if_setmtu(ifp, ifr->ifr_mtu); 5775 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5776 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING); 5777 bge_init_locked(sc); 5778 } 5779 } 5780 BGE_UNLOCK(sc); 5781 break; 5782 case SIOCSIFFLAGS: 5783 BGE_LOCK(sc); 5784 if (if_getflags(ifp) & IFF_UP) { 5785 /* 5786 * If only the state of the PROMISC flag changed, 5787 * then just use the 'set promisc mode' command 5788 * instead of reinitializing the entire NIC. Doing 5789 * a full re-init means reloading the firmware and 5790 * waiting for it to start up, which may take a 5791 * second or two. Similarly for ALLMULTI. 5792 */ 5793 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5794 flags = if_getflags(ifp) ^ sc->bge_if_flags; 5795 if (flags & IFF_PROMISC) 5796 bge_setpromisc(sc); 5797 if (flags & IFF_ALLMULTI) 5798 bge_setmulti(sc); 5799 } else 5800 bge_init_locked(sc); 5801 } else { 5802 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5803 bge_stop(sc); 5804 } 5805 } 5806 sc->bge_if_flags = if_getflags(ifp); 5807 BGE_UNLOCK(sc); 5808 error = 0; 5809 break; 5810 case SIOCADDMULTI: 5811 case SIOCDELMULTI: 5812 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5813 BGE_LOCK(sc); 5814 bge_setmulti(sc); 5815 BGE_UNLOCK(sc); 5816 error = 0; 5817 } 5818 break; 5819 case SIOCSIFMEDIA: 5820 case SIOCGIFMEDIA: 5821 if (sc->bge_flags & BGE_FLAG_TBI) { 5822 error = ifmedia_ioctl(ifp, ifr, 5823 &sc->bge_ifmedia, command); 5824 } else { 5825 mii = device_get_softc(sc->bge_miibus); 5826 error = ifmedia_ioctl(ifp, ifr, 5827 &mii->mii_media, command); 5828 } 5829 break; 5830 case SIOCSIFCAP: 5831 mask = ifr->ifr_reqcap ^ if_getcapenable(ifp); 5832#ifdef DEVICE_POLLING 5833 if (mask & IFCAP_POLLING) { 5834 if (ifr->ifr_reqcap & IFCAP_POLLING) { 5835 error = ether_poll_register(bge_poll, ifp); 5836 if (error) 5837 return (error); 5838 BGE_LOCK(sc); 5839 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 5840 BGE_PCIMISCCTL_MASK_PCI_INTR); 5841 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 5842 if_setcapenablebit(ifp, IFCAP_POLLING, 0); 5843 BGE_UNLOCK(sc); 5844 } else { 5845 error = ether_poll_deregister(ifp); 5846 /* Enable interrupt even in error case */ 5847 BGE_LOCK(sc); 5848 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, 5849 BGE_PCIMISCCTL_MASK_PCI_INTR); 5850 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 5851 if_setcapenablebit(ifp, 0, IFCAP_POLLING); 5852 BGE_UNLOCK(sc); 5853 } 5854 } 5855#endif 5856 if ((mask & IFCAP_TXCSUM) != 0 && 5857 (if_getcapabilities(ifp) & IFCAP_TXCSUM) != 0) { 5858 if_togglecapenable(ifp, IFCAP_TXCSUM); 5859 if ((if_getcapenable(ifp) & IFCAP_TXCSUM) != 0) 5860 if_sethwassistbits(ifp, 5861 sc->bge_csum_features, 0); 5862 else 5863 if_sethwassistbits(ifp, 0, 5864 sc->bge_csum_features); 5865 } 5866 5867 if ((mask & IFCAP_RXCSUM) != 0 && 5868 (if_getcapabilities(ifp) & IFCAP_RXCSUM) != 0) 5869 if_togglecapenable(ifp, IFCAP_RXCSUM); 5870 5871 if ((mask & IFCAP_TSO4) != 0 && 5872 (if_getcapabilities(ifp) & IFCAP_TSO4) != 0) { 5873 if_togglecapenable(ifp, IFCAP_TSO4); 5874 if ((if_getcapenable(ifp) & IFCAP_TSO4) != 0) 5875 if_sethwassistbits(ifp, CSUM_TSO, 0); 5876 else 5877 if_sethwassistbits(ifp, 0, CSUM_TSO); 5878 } 5879 5880 if (mask & IFCAP_VLAN_MTU) { 5881 if_togglecapenable(ifp, IFCAP_VLAN_MTU); 5882 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING); 5883 bge_init(sc); 5884 } 5885 5886 if ((mask & IFCAP_VLAN_HWTSO) != 0 && 5887 (if_getcapabilities(ifp) & IFCAP_VLAN_HWTSO) != 0) 5888 if_togglecapenable(ifp, IFCAP_VLAN_HWTSO); 5889 if ((mask & IFCAP_VLAN_HWTAGGING) != 0 && 5890 (if_getcapabilities(ifp) & IFCAP_VLAN_HWTAGGING) != 0) { 5891 if_togglecapenable(ifp, IFCAP_VLAN_HWTAGGING); 5892 if ((if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING) == 0) 5893 if_setcapenablebit(ifp, 0, IFCAP_VLAN_HWTSO); 5894 BGE_LOCK(sc); 5895 bge_setvlan(sc); 5896 BGE_UNLOCK(sc); 5897 } 5898#ifdef VLAN_CAPABILITIES 5899 if_vlancap(ifp); 5900#endif 5901 break; 5902 default: 5903 error = ether_ioctl(ifp, command, data); 5904 break; 5905 } 5906 5907 return (error); 5908} 5909 5910static void 5911bge_watchdog(struct bge_softc *sc) 5912{ 5913 if_t ifp; 5914 uint32_t status; 5915 5916 BGE_LOCK_ASSERT(sc); 5917 5918 if (sc->bge_timer == 0 || --sc->bge_timer) 5919 return; 5920 5921 /* If pause frames are active then don't reset the hardware. */ 5922 if ((CSR_READ_4(sc, BGE_RX_MODE) & BGE_RXMODE_FLOWCTL_ENABLE) != 0) { 5923 status = CSR_READ_4(sc, BGE_RX_STS); 5924 if ((status & BGE_RXSTAT_REMOTE_XOFFED) != 0) { 5925 /* 5926 * If link partner has us in XOFF state then wait for 5927 * the condition to clear. 5928 */ 5929 CSR_WRITE_4(sc, BGE_RX_STS, status); 5930 sc->bge_timer = BGE_TX_TIMEOUT; 5931 return; 5932 } else if ((status & BGE_RXSTAT_RCVD_XOFF) != 0 && 5933 (status & BGE_RXSTAT_RCVD_XON) != 0) { 5934 /* 5935 * If link partner has us in XOFF state then wait for 5936 * the condition to clear. 5937 */ 5938 CSR_WRITE_4(sc, BGE_RX_STS, status); 5939 sc->bge_timer = BGE_TX_TIMEOUT; 5940 return; 5941 } 5942 /* 5943 * Any other condition is unexpected and the controller 5944 * should be reset. 5945 */ 5946 } 5947 5948 ifp = sc->bge_ifp; 5949 5950 if_printf(ifp, "watchdog timeout -- resetting\n"); 5951 5952 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING); 5953 bge_init_locked(sc); 5954 5955 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 5956} 5957 5958static void 5959bge_stop_block(struct bge_softc *sc, bus_size_t reg, uint32_t bit) 5960{ 5961 int i; 5962 5963 BGE_CLRBIT(sc, reg, bit); 5964 5965 for (i = 0; i < BGE_TIMEOUT; i++) { 5966 if ((CSR_READ_4(sc, reg) & bit) == 0) 5967 return; 5968 DELAY(100); 5969 } 5970} 5971 5972/* 5973 * Stop the adapter and free any mbufs allocated to the 5974 * RX and TX lists. 5975 */ 5976static void 5977bge_stop(struct bge_softc *sc) 5978{ 5979 if_t ifp; 5980 5981 BGE_LOCK_ASSERT(sc); 5982 5983 ifp = sc->bge_ifp; 5984 5985 callout_stop(&sc->bge_stat_ch); 5986 5987 /* Disable host interrupts. */ 5988 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 5989 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 5990 5991 /* 5992 * Tell firmware we're shutting down. 5993 */ 5994 bge_stop_fw(sc); 5995 bge_sig_pre_reset(sc, BGE_RESET_SHUTDOWN); 5996 5997 /* 5998 * Disable all of the receiver blocks. 5999 */ 6000 bge_stop_block(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 6001 bge_stop_block(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 6002 bge_stop_block(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 6003 if (BGE_IS_5700_FAMILY(sc)) 6004 bge_stop_block(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 6005 bge_stop_block(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE); 6006 bge_stop_block(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 6007 bge_stop_block(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE); 6008 6009 /* 6010 * Disable all of the transmit blocks. 6011 */ 6012 bge_stop_block(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 6013 bge_stop_block(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 6014 bge_stop_block(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 6015 bge_stop_block(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE); 6016 bge_stop_block(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); 6017 if (BGE_IS_5700_FAMILY(sc)) 6018 bge_stop_block(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 6019 bge_stop_block(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 6020 6021 /* 6022 * Shut down all of the memory managers and related 6023 * state machines. 6024 */ 6025 bge_stop_block(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); 6026 bge_stop_block(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE); 6027 if (BGE_IS_5700_FAMILY(sc)) 6028 bge_stop_block(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 6029 6030 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 6031 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 6032 if (!(BGE_IS_5705_PLUS(sc))) { 6033 BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE); 6034 BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 6035 } 6036 /* Update MAC statistics. */ 6037 if (BGE_IS_5705_PLUS(sc)) 6038 bge_stats_update_regs(sc); 6039 6040 bge_reset(sc); 6041 bge_sig_legacy(sc, BGE_RESET_SHUTDOWN); 6042 bge_sig_post_reset(sc, BGE_RESET_SHUTDOWN); 6043 6044 /* 6045 * Keep the ASF firmware running if up. 6046 */ 6047 if (sc->bge_asf_mode & ASF_STACKUP) 6048 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 6049 else 6050 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 6051 6052 /* Free the RX lists. */ 6053 bge_free_rx_ring_std(sc); 6054 6055 /* Free jumbo RX list. */ 6056 if (BGE_IS_JUMBO_CAPABLE(sc)) 6057 bge_free_rx_ring_jumbo(sc); 6058 6059 /* Free TX buffers. */ 6060 bge_free_tx_ring(sc); 6061 6062 sc->bge_tx_saved_considx = BGE_TXCONS_UNSET; 6063 6064 /* Clear MAC's link state (PHY may still have link UP). */ 6065 if (bootverbose && sc->bge_link) 6066 if_printf(sc->bge_ifp, "link DOWN\n"); 6067 sc->bge_link = 0; 6068 6069 if_setdrvflagbits(ifp, 0, (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)); 6070} 6071 6072/* 6073 * Stop all chip I/O so that the kernel's probe routines don't 6074 * get confused by errant DMAs when rebooting. 6075 */ 6076static int 6077bge_shutdown(device_t dev) 6078{ 6079 struct bge_softc *sc; 6080 6081 sc = device_get_softc(dev); 6082 BGE_LOCK(sc); 6083 bge_stop(sc); 6084 BGE_UNLOCK(sc); 6085 6086 return (0); 6087} 6088 6089static int 6090bge_suspend(device_t dev) 6091{ 6092 struct bge_softc *sc; 6093 6094 sc = device_get_softc(dev); 6095 BGE_LOCK(sc); 6096 bge_stop(sc); 6097 BGE_UNLOCK(sc); 6098 6099 return (0); 6100} 6101 6102static int 6103bge_resume(device_t dev) 6104{ 6105 struct bge_softc *sc; 6106 if_t ifp; 6107 6108 sc = device_get_softc(dev); 6109 BGE_LOCK(sc); 6110 ifp = sc->bge_ifp; 6111 if (if_getflags(ifp) & IFF_UP) { 6112 bge_init_locked(sc); 6113 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) 6114 bge_start_locked(ifp); 6115 } 6116 BGE_UNLOCK(sc); 6117 6118 return (0); 6119} 6120 6121static void 6122bge_link_upd(struct bge_softc *sc) 6123{ 6124 struct mii_data *mii; 6125 uint32_t link, status; 6126 6127 BGE_LOCK_ASSERT(sc); 6128 6129 /* Clear 'pending link event' flag. */ 6130 sc->bge_link_evt = 0; 6131 6132 /* 6133 * Process link state changes. 6134 * Grrr. The link status word in the status block does 6135 * not work correctly on the BCM5700 rev AX and BX chips, 6136 * according to all available information. Hence, we have 6137 * to enable MII interrupts in order to properly obtain 6138 * async link changes. Unfortunately, this also means that 6139 * we have to read the MAC status register to detect link 6140 * changes, thereby adding an additional register access to 6141 * the interrupt handler. 6142 * 6143 * XXX: perhaps link state detection procedure used for 6144 * BGE_CHIPID_BCM5700_B2 can be used for others BCM5700 revisions. 6145 */ 6146 6147 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 6148 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) { 6149 status = CSR_READ_4(sc, BGE_MAC_STS); 6150 if (status & BGE_MACSTAT_MI_INTERRUPT) { 6151 mii = device_get_softc(sc->bge_miibus); 6152 mii_pollstat(mii); 6153 if (!sc->bge_link && 6154 mii->mii_media_status & IFM_ACTIVE && 6155 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 6156 sc->bge_link++; 6157 if (bootverbose) 6158 if_printf(sc->bge_ifp, "link UP\n"); 6159 } else if (sc->bge_link && 6160 (!(mii->mii_media_status & IFM_ACTIVE) || 6161 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 6162 sc->bge_link = 0; 6163 if (bootverbose) 6164 if_printf(sc->bge_ifp, "link DOWN\n"); 6165 } 6166 6167 /* Clear the interrupt. */ 6168 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 6169 BGE_EVTENB_MI_INTERRUPT); 6170 bge_miibus_readreg(sc->bge_dev, sc->bge_phy_addr, 6171 BRGPHY_MII_ISR); 6172 bge_miibus_writereg(sc->bge_dev, sc->bge_phy_addr, 6173 BRGPHY_MII_IMR, BRGPHY_INTRS); 6174 } 6175 return; 6176 } 6177 6178 if (sc->bge_flags & BGE_FLAG_TBI) { 6179 status = CSR_READ_4(sc, BGE_MAC_STS); 6180 if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) { 6181 if (!sc->bge_link) { 6182 sc->bge_link++; 6183 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 6184 BGE_CLRBIT(sc, BGE_MAC_MODE, 6185 BGE_MACMODE_TBI_SEND_CFGS); 6186 DELAY(40); 6187 } 6188 CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF); 6189 if (bootverbose) 6190 if_printf(sc->bge_ifp, "link UP\n"); 6191 if_link_state_change(sc->bge_ifp, 6192 LINK_STATE_UP); 6193 } 6194 } else if (sc->bge_link) { 6195 sc->bge_link = 0; 6196 if (bootverbose) 6197 if_printf(sc->bge_ifp, "link DOWN\n"); 6198 if_link_state_change(sc->bge_ifp, LINK_STATE_DOWN); 6199 } 6200 } else if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 6201 /* 6202 * Some broken BCM chips have BGE_STATFLAG_LINKSTATE_CHANGED bit 6203 * in status word always set. Workaround this bug by reading 6204 * PHY link status directly. 6205 */ 6206 link = (CSR_READ_4(sc, BGE_MI_STS) & BGE_MISTS_LINK) ? 1 : 0; 6207 6208 if (link != sc->bge_link || 6209 sc->bge_asicrev == BGE_ASICREV_BCM5700) { 6210 mii = device_get_softc(sc->bge_miibus); 6211 mii_pollstat(mii); 6212 if (!sc->bge_link && 6213 mii->mii_media_status & IFM_ACTIVE && 6214 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 6215 sc->bge_link++; 6216 if (bootverbose) 6217 if_printf(sc->bge_ifp, "link UP\n"); 6218 } else if (sc->bge_link && 6219 (!(mii->mii_media_status & IFM_ACTIVE) || 6220 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 6221 sc->bge_link = 0; 6222 if (bootverbose) 6223 if_printf(sc->bge_ifp, "link DOWN\n"); 6224 } 6225 } 6226 } else { 6227 /* 6228 * For controllers that call mii_tick, we have to poll 6229 * link status. 6230 */ 6231 mii = device_get_softc(sc->bge_miibus); 6232 mii_pollstat(mii); 6233 bge_miibus_statchg(sc->bge_dev); 6234 } 6235 6236 /* Disable MAC attention when link is up. */ 6237 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 6238 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 6239 BGE_MACSTAT_LINK_CHANGED); 6240} 6241 6242static void 6243bge_add_sysctls(struct bge_softc *sc) 6244{ 6245 struct sysctl_ctx_list *ctx; 6246 struct sysctl_oid_list *children; 6247 int unit; 6248 6249 ctx = device_get_sysctl_ctx(sc->bge_dev); 6250 children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bge_dev)); 6251 6252#ifdef BGE_REGISTER_DEBUG 6253 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "debug_info", 6254 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_debug_info, "I", 6255 "Debug Information"); 6256 6257 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "reg_read", 6258 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_reg_read, "I", 6259 "MAC Register Read"); 6260 6261 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "ape_read", 6262 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_ape_read, "I", 6263 "APE Register Read"); 6264 6265 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "mem_read", 6266 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_mem_read, "I", 6267 "Memory Read"); 6268 6269#endif 6270 6271 unit = device_get_unit(sc->bge_dev); 6272 /* 6273 * A common design characteristic for many Broadcom client controllers 6274 * is that they only support a single outstanding DMA read operation 6275 * on the PCIe bus. This means that it will take twice as long to fetch 6276 * a TX frame that is split into header and payload buffers as it does 6277 * to fetch a single, contiguous TX frame (2 reads vs. 1 read). For 6278 * these controllers, coalescing buffers to reduce the number of memory 6279 * reads is effective way to get maximum performance(about 940Mbps). 6280 * Without collapsing TX buffers the maximum TCP bulk transfer 6281 * performance is about 850Mbps. However forcing coalescing mbufs 6282 * consumes a lot of CPU cycles, so leave it off by default. 6283 */ 6284 sc->bge_forced_collapse = 0; 6285 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_collapse", 6286 CTLFLAG_RWTUN, &sc->bge_forced_collapse, 0, 6287 "Number of fragmented TX buffers of a frame allowed before " 6288 "forced collapsing"); 6289 6290 sc->bge_msi = 1; 6291 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "msi", 6292 CTLFLAG_RDTUN, &sc->bge_msi, 0, "Enable MSI"); 6293 6294 /* 6295 * It seems all Broadcom controllers have a bug that can generate UDP 6296 * datagrams with checksum value 0 when TX UDP checksum offloading is 6297 * enabled. Generating UDP checksum value 0 is RFC 768 violation. 6298 * Even though the probability of generating such UDP datagrams is 6299 * low, I don't want to see FreeBSD boxes to inject such datagrams 6300 * into network so disable UDP checksum offloading by default. Users 6301 * still override this behavior by setting a sysctl variable, 6302 * dev.bge.0.forced_udpcsum. 6303 */ 6304 sc->bge_forced_udpcsum = 0; 6305 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_udpcsum", 6306 CTLFLAG_RWTUN, &sc->bge_forced_udpcsum, 0, 6307 "Enable UDP checksum offloading even if controller can " 6308 "generate UDP checksum value 0"); 6309 6310 if (BGE_IS_5705_PLUS(sc)) 6311 bge_add_sysctl_stats_regs(sc, ctx, children); 6312 else 6313 bge_add_sysctl_stats(sc, ctx, children); 6314} 6315 6316#define BGE_SYSCTL_STAT(sc, ctx, desc, parent, node, oid) \ 6317 SYSCTL_ADD_PROC(ctx, parent, OID_AUTO, oid, CTLTYPE_UINT|CTLFLAG_RD, \ 6318 sc, offsetof(struct bge_stats, node), bge_sysctl_stats, "IU", \ 6319 desc) 6320 6321static void 6322bge_add_sysctl_stats(struct bge_softc *sc, struct sysctl_ctx_list *ctx, 6323 struct sysctl_oid_list *parent) 6324{ 6325 struct sysctl_oid *tree; 6326 struct sysctl_oid_list *children, *schildren; 6327 6328 tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "stats", CTLFLAG_RD, 6329 NULL, "BGE Statistics"); 6330 schildren = children = SYSCTL_CHILDREN(tree); 6331 BGE_SYSCTL_STAT(sc, ctx, "Frames Dropped Due To Filters", 6332 children, COSFramesDroppedDueToFilters, 6333 "FramesDroppedDueToFilters"); 6334 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write Queue Full", 6335 children, nicDmaWriteQueueFull, "DmaWriteQueueFull"); 6336 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write High Priority Queue Full", 6337 children, nicDmaWriteHighPriQueueFull, "DmaWriteHighPriQueueFull"); 6338 BGE_SYSCTL_STAT(sc, ctx, "NIC No More RX Buffer Descriptors", 6339 children, nicNoMoreRxBDs, "NoMoreRxBDs"); 6340 BGE_SYSCTL_STAT(sc, ctx, "Discarded Input Frames", 6341 children, ifInDiscards, "InputDiscards"); 6342 BGE_SYSCTL_STAT(sc, ctx, "Input Errors", 6343 children, ifInErrors, "InputErrors"); 6344 BGE_SYSCTL_STAT(sc, ctx, "NIC Recv Threshold Hit", 6345 children, nicRecvThresholdHit, "RecvThresholdHit"); 6346 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read Queue Full", 6347 children, nicDmaReadQueueFull, "DmaReadQueueFull"); 6348 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read High Priority Queue Full", 6349 children, nicDmaReadHighPriQueueFull, "DmaReadHighPriQueueFull"); 6350 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Data Complete Queue Full", 6351 children, nicSendDataCompQueueFull, "SendDataCompQueueFull"); 6352 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Set Send Producer Index", 6353 children, nicRingSetSendProdIndex, "RingSetSendProdIndex"); 6354 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Status Update", 6355 children, nicRingStatusUpdate, "RingStatusUpdate"); 6356 BGE_SYSCTL_STAT(sc, ctx, "NIC Interrupts", 6357 children, nicInterrupts, "Interrupts"); 6358 BGE_SYSCTL_STAT(sc, ctx, "NIC Avoided Interrupts", 6359 children, nicAvoidedInterrupts, "AvoidedInterrupts"); 6360 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Threshold Hit", 6361 children, nicSendThresholdHit, "SendThresholdHit"); 6362 6363 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "rx", CTLFLAG_RD, 6364 NULL, "BGE RX Statistics"); 6365 children = SYSCTL_CHILDREN(tree); 6366 BGE_SYSCTL_STAT(sc, ctx, "Inbound Octets", 6367 children, rxstats.ifHCInOctets, "ifHCInOctets"); 6368 BGE_SYSCTL_STAT(sc, ctx, "Fragments", 6369 children, rxstats.etherStatsFragments, "Fragments"); 6370 BGE_SYSCTL_STAT(sc, ctx, "Inbound Unicast Packets", 6371 children, rxstats.ifHCInUcastPkts, "UnicastPkts"); 6372 BGE_SYSCTL_STAT(sc, ctx, "Inbound Multicast Packets", 6373 children, rxstats.ifHCInMulticastPkts, "MulticastPkts"); 6374 BGE_SYSCTL_STAT(sc, ctx, "FCS Errors", 6375 children, rxstats.dot3StatsFCSErrors, "FCSErrors"); 6376 BGE_SYSCTL_STAT(sc, ctx, "Alignment Errors", 6377 children, rxstats.dot3StatsAlignmentErrors, "AlignmentErrors"); 6378 BGE_SYSCTL_STAT(sc, ctx, "XON Pause Frames Received", 6379 children, rxstats.xonPauseFramesReceived, "xonPauseFramesReceived"); 6380 BGE_SYSCTL_STAT(sc, ctx, "XOFF Pause Frames Received", 6381 children, rxstats.xoffPauseFramesReceived, 6382 "xoffPauseFramesReceived"); 6383 BGE_SYSCTL_STAT(sc, ctx, "MAC Control Frames Received", 6384 children, rxstats.macControlFramesReceived, 6385 "ControlFramesReceived"); 6386 BGE_SYSCTL_STAT(sc, ctx, "XOFF State Entered", 6387 children, rxstats.xoffStateEntered, "xoffStateEntered"); 6388 BGE_SYSCTL_STAT(sc, ctx, "Frames Too Long", 6389 children, rxstats.dot3StatsFramesTooLong, "FramesTooLong"); 6390 BGE_SYSCTL_STAT(sc, ctx, "Jabbers", 6391 children, rxstats.etherStatsJabbers, "Jabbers"); 6392 BGE_SYSCTL_STAT(sc, ctx, "Undersized Packets", 6393 children, rxstats.etherStatsUndersizePkts, "UndersizePkts"); 6394 BGE_SYSCTL_STAT(sc, ctx, "Inbound Range Length Errors", 6395 children, rxstats.inRangeLengthError, "inRangeLengthError"); 6396 BGE_SYSCTL_STAT(sc, ctx, "Outbound Range Length Errors", 6397 children, rxstats.outRangeLengthError, "outRangeLengthError"); 6398 6399 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "tx", CTLFLAG_RD, 6400 NULL, "BGE TX Statistics"); 6401 children = SYSCTL_CHILDREN(tree); 6402 BGE_SYSCTL_STAT(sc, ctx, "Outbound Octets", 6403 children, txstats.ifHCOutOctets, "ifHCOutOctets"); 6404 BGE_SYSCTL_STAT(sc, ctx, "TX Collisions", 6405 children, txstats.etherStatsCollisions, "Collisions"); 6406 BGE_SYSCTL_STAT(sc, ctx, "XON Sent", 6407 children, txstats.outXonSent, "XonSent"); 6408 BGE_SYSCTL_STAT(sc, ctx, "XOFF Sent", 6409 children, txstats.outXoffSent, "XoffSent"); 6410 BGE_SYSCTL_STAT(sc, ctx, "Flow Control Done", 6411 children, txstats.flowControlDone, "flowControlDone"); 6412 BGE_SYSCTL_STAT(sc, ctx, "Internal MAC TX errors", 6413 children, txstats.dot3StatsInternalMacTransmitErrors, 6414 "InternalMacTransmitErrors"); 6415 BGE_SYSCTL_STAT(sc, ctx, "Single Collision Frames", 6416 children, txstats.dot3StatsSingleCollisionFrames, 6417 "SingleCollisionFrames"); 6418 BGE_SYSCTL_STAT(sc, ctx, "Multiple Collision Frames", 6419 children, txstats.dot3StatsMultipleCollisionFrames, 6420 "MultipleCollisionFrames"); 6421 BGE_SYSCTL_STAT(sc, ctx, "Deferred Transmissions", 6422 children, txstats.dot3StatsDeferredTransmissions, 6423 "DeferredTransmissions"); 6424 BGE_SYSCTL_STAT(sc, ctx, "Excessive Collisions", 6425 children, txstats.dot3StatsExcessiveCollisions, 6426 "ExcessiveCollisions"); 6427 BGE_SYSCTL_STAT(sc, ctx, "Late Collisions", 6428 children, txstats.dot3StatsLateCollisions, 6429 "LateCollisions"); 6430 BGE_SYSCTL_STAT(sc, ctx, "Outbound Unicast Packets", 6431 children, txstats.ifHCOutUcastPkts, "UnicastPkts"); 6432 BGE_SYSCTL_STAT(sc, ctx, "Outbound Multicast Packets", 6433 children, txstats.ifHCOutMulticastPkts, "MulticastPkts"); 6434 BGE_SYSCTL_STAT(sc, ctx, "Outbound Broadcast Packets", 6435 children, txstats.ifHCOutBroadcastPkts, "BroadcastPkts"); 6436 BGE_SYSCTL_STAT(sc, ctx, "Carrier Sense Errors", 6437 children, txstats.dot3StatsCarrierSenseErrors, 6438 "CarrierSenseErrors"); 6439 BGE_SYSCTL_STAT(sc, ctx, "Outbound Discards", 6440 children, txstats.ifOutDiscards, "Discards"); 6441 BGE_SYSCTL_STAT(sc, ctx, "Outbound Errors", 6442 children, txstats.ifOutErrors, "Errors"); 6443} 6444 6445#undef BGE_SYSCTL_STAT 6446 6447#define BGE_SYSCTL_STAT_ADD64(c, h, n, p, d) \ 6448 SYSCTL_ADD_UQUAD(c, h, OID_AUTO, n, CTLFLAG_RD, p, d) 6449 6450static void 6451bge_add_sysctl_stats_regs(struct bge_softc *sc, struct sysctl_ctx_list *ctx, 6452 struct sysctl_oid_list *parent) 6453{ 6454 struct sysctl_oid *tree; 6455 struct sysctl_oid_list *child, *schild; 6456 struct bge_mac_stats *stats; 6457 6458 stats = &sc->bge_mac_stats; 6459 tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "stats", CTLFLAG_RD, 6460 NULL, "BGE Statistics"); 6461 schild = child = SYSCTL_CHILDREN(tree); 6462 BGE_SYSCTL_STAT_ADD64(ctx, child, "FramesDroppedDueToFilters", 6463 &stats->FramesDroppedDueToFilters, "Frames Dropped Due to Filters"); 6464 BGE_SYSCTL_STAT_ADD64(ctx, child, "DmaWriteQueueFull", 6465 &stats->DmaWriteQueueFull, "NIC DMA Write Queue Full"); 6466 BGE_SYSCTL_STAT_ADD64(ctx, child, "DmaWriteHighPriQueueFull", 6467 &stats->DmaWriteHighPriQueueFull, 6468 "NIC DMA Write High Priority Queue Full"); 6469 BGE_SYSCTL_STAT_ADD64(ctx, child, "NoMoreRxBDs", 6470 &stats->NoMoreRxBDs, "NIC No More RX Buffer Descriptors"); 6471 BGE_SYSCTL_STAT_ADD64(ctx, child, "InputDiscards", 6472 &stats->InputDiscards, "Discarded Input Frames"); 6473 BGE_SYSCTL_STAT_ADD64(ctx, child, "InputErrors", 6474 &stats->InputErrors, "Input Errors"); 6475 BGE_SYSCTL_STAT_ADD64(ctx, child, "RecvThresholdHit", 6476 &stats->RecvThresholdHit, "NIC Recv Threshold Hit"); 6477 6478 tree = SYSCTL_ADD_NODE(ctx, schild, OID_AUTO, "rx", CTLFLAG_RD, 6479 NULL, "BGE RX Statistics"); 6480 child = SYSCTL_CHILDREN(tree); 6481 BGE_SYSCTL_STAT_ADD64(ctx, child, "ifHCInOctets", 6482 &stats->ifHCInOctets, "Inbound Octets"); 6483 BGE_SYSCTL_STAT_ADD64(ctx, child, "Fragments", 6484 &stats->etherStatsFragments, "Fragments"); 6485 BGE_SYSCTL_STAT_ADD64(ctx, child, "UnicastPkts", 6486 &stats->ifHCInUcastPkts, "Inbound Unicast Packets"); 6487 BGE_SYSCTL_STAT_ADD64(ctx, child, "MulticastPkts", 6488 &stats->ifHCInMulticastPkts, "Inbound Multicast Packets"); 6489 BGE_SYSCTL_STAT_ADD64(ctx, child, "BroadcastPkts", 6490 &stats->ifHCInBroadcastPkts, "Inbound Broadcast Packets"); 6491 BGE_SYSCTL_STAT_ADD64(ctx, child, "FCSErrors", 6492 &stats->dot3StatsFCSErrors, "FCS Errors"); 6493 BGE_SYSCTL_STAT_ADD64(ctx, child, "AlignmentErrors", 6494 &stats->dot3StatsAlignmentErrors, "Alignment Errors"); 6495 BGE_SYSCTL_STAT_ADD64(ctx, child, "xonPauseFramesReceived", 6496 &stats->xonPauseFramesReceived, "XON Pause Frames Received"); 6497 BGE_SYSCTL_STAT_ADD64(ctx, child, "xoffPauseFramesReceived", 6498 &stats->xoffPauseFramesReceived, "XOFF Pause Frames Received"); 6499 BGE_SYSCTL_STAT_ADD64(ctx, child, "ControlFramesReceived", 6500 &stats->macControlFramesReceived, "MAC Control Frames Received"); 6501 BGE_SYSCTL_STAT_ADD64(ctx, child, "xoffStateEntered", 6502 &stats->xoffStateEntered, "XOFF State Entered"); 6503 BGE_SYSCTL_STAT_ADD64(ctx, child, "FramesTooLong", 6504 &stats->dot3StatsFramesTooLong, "Frames Too Long"); 6505 BGE_SYSCTL_STAT_ADD64(ctx, child, "Jabbers", 6506 &stats->etherStatsJabbers, "Jabbers"); 6507 BGE_SYSCTL_STAT_ADD64(ctx, child, "UndersizePkts", 6508 &stats->etherStatsUndersizePkts, "Undersized Packets"); 6509 6510 tree = SYSCTL_ADD_NODE(ctx, schild, OID_AUTO, "tx", CTLFLAG_RD, 6511 NULL, "BGE TX Statistics"); 6512 child = SYSCTL_CHILDREN(tree); 6513 BGE_SYSCTL_STAT_ADD64(ctx, child, "ifHCOutOctets", 6514 &stats->ifHCOutOctets, "Outbound Octets"); 6515 BGE_SYSCTL_STAT_ADD64(ctx, child, "Collisions", 6516 &stats->etherStatsCollisions, "TX Collisions"); 6517 BGE_SYSCTL_STAT_ADD64(ctx, child, "XonSent", 6518 &stats->outXonSent, "XON Sent"); 6519 BGE_SYSCTL_STAT_ADD64(ctx, child, "XoffSent", 6520 &stats->outXoffSent, "XOFF Sent"); 6521 BGE_SYSCTL_STAT_ADD64(ctx, child, "InternalMacTransmitErrors", 6522 &stats->dot3StatsInternalMacTransmitErrors, 6523 "Internal MAC TX Errors"); 6524 BGE_SYSCTL_STAT_ADD64(ctx, child, "SingleCollisionFrames", 6525 &stats->dot3StatsSingleCollisionFrames, "Single Collision Frames"); 6526 BGE_SYSCTL_STAT_ADD64(ctx, child, "MultipleCollisionFrames", 6527 &stats->dot3StatsMultipleCollisionFrames, 6528 "Multiple Collision Frames"); 6529 BGE_SYSCTL_STAT_ADD64(ctx, child, "DeferredTransmissions", 6530 &stats->dot3StatsDeferredTransmissions, "Deferred Transmissions"); 6531 BGE_SYSCTL_STAT_ADD64(ctx, child, "ExcessiveCollisions", 6532 &stats->dot3StatsExcessiveCollisions, "Excessive Collisions"); 6533 BGE_SYSCTL_STAT_ADD64(ctx, child, "LateCollisions", 6534 &stats->dot3StatsLateCollisions, "Late Collisions"); 6535 BGE_SYSCTL_STAT_ADD64(ctx, child, "UnicastPkts", 6536 &stats->ifHCOutUcastPkts, "Outbound Unicast Packets"); 6537 BGE_SYSCTL_STAT_ADD64(ctx, child, "MulticastPkts", 6538 &stats->ifHCOutMulticastPkts, "Outbound Multicast Packets"); 6539 BGE_SYSCTL_STAT_ADD64(ctx, child, "BroadcastPkts", 6540 &stats->ifHCOutBroadcastPkts, "Outbound Broadcast Packets"); 6541} 6542 6543#undef BGE_SYSCTL_STAT_ADD64 6544 6545static int 6546bge_sysctl_stats(SYSCTL_HANDLER_ARGS) 6547{ 6548 struct bge_softc *sc; 6549 uint32_t result; 6550 int offset; 6551 6552 sc = (struct bge_softc *)arg1; 6553 offset = arg2; 6554 result = CSR_READ_4(sc, BGE_MEMWIN_START + BGE_STATS_BLOCK + offset + 6555 offsetof(bge_hostaddr, bge_addr_lo)); 6556 return (sysctl_handle_int(oidp, &result, 0, req)); 6557} 6558 6559#ifdef BGE_REGISTER_DEBUG 6560static int 6561bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS) 6562{ 6563 struct bge_softc *sc; 6564 uint16_t *sbdata; 6565 int error, result, sbsz; 6566 int i, j; 6567 6568 result = -1; 6569 error = sysctl_handle_int(oidp, &result, 0, req); 6570 if (error || (req->newptr == NULL)) 6571 return (error); 6572 6573 if (result == 1) { 6574 sc = (struct bge_softc *)arg1; 6575 6576 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 6577 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) 6578 sbsz = BGE_STATUS_BLK_SZ; 6579 else 6580 sbsz = 32; 6581 sbdata = (uint16_t *)sc->bge_ldata.bge_status_block; 6582 printf("Status Block:\n"); 6583 BGE_LOCK(sc); 6584 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 6585 sc->bge_cdata.bge_status_map, 6586 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 6587 for (i = 0x0; i < sbsz / sizeof(uint16_t); ) { 6588 printf("%06x:", i); 6589 for (j = 0; j < 8; j++) 6590 printf(" %04x", sbdata[i++]); 6591 printf("\n"); 6592 } 6593 6594 printf("Registers:\n"); 6595 for (i = 0x800; i < 0xA00; ) { 6596 printf("%06x:", i); 6597 for (j = 0; j < 8; j++) { 6598 printf(" %08x", CSR_READ_4(sc, i)); 6599 i += 4; 6600 } 6601 printf("\n"); 6602 } 6603 BGE_UNLOCK(sc); 6604 6605 printf("Hardware Flags:\n"); 6606 if (BGE_IS_5717_PLUS(sc)) 6607 printf(" - 5717 Plus\n"); 6608 if (BGE_IS_5755_PLUS(sc)) 6609 printf(" - 5755 Plus\n"); 6610 if (BGE_IS_575X_PLUS(sc)) 6611 printf(" - 575X Plus\n"); 6612 if (BGE_IS_5705_PLUS(sc)) 6613 printf(" - 5705 Plus\n"); 6614 if (BGE_IS_5714_FAMILY(sc)) 6615 printf(" - 5714 Family\n"); 6616 if (BGE_IS_5700_FAMILY(sc)) 6617 printf(" - 5700 Family\n"); 6618 if (sc->bge_flags & BGE_FLAG_JUMBO) 6619 printf(" - Supports Jumbo Frames\n"); 6620 if (sc->bge_flags & BGE_FLAG_PCIX) 6621 printf(" - PCI-X Bus\n"); 6622 if (sc->bge_flags & BGE_FLAG_PCIE) 6623 printf(" - PCI Express Bus\n"); 6624 if (sc->bge_phy_flags & BGE_PHY_NO_3LED) 6625 printf(" - No 3 LEDs\n"); 6626 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) 6627 printf(" - RX Alignment Bug\n"); 6628 } 6629 6630 return (error); 6631} 6632 6633static int 6634bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS) 6635{ 6636 struct bge_softc *sc; 6637 int error; 6638 uint16_t result; 6639 uint32_t val; 6640 6641 result = -1; 6642 error = sysctl_handle_int(oidp, &result, 0, req); 6643 if (error || (req->newptr == NULL)) 6644 return (error); 6645 6646 if (result < 0x8000) { 6647 sc = (struct bge_softc *)arg1; 6648 val = CSR_READ_4(sc, result); 6649 printf("reg 0x%06X = 0x%08X\n", result, val); 6650 } 6651 6652 return (error); 6653} 6654 6655static int 6656bge_sysctl_ape_read(SYSCTL_HANDLER_ARGS) 6657{ 6658 struct bge_softc *sc; 6659 int error; 6660 uint16_t result; 6661 uint32_t val; 6662 6663 result = -1; 6664 error = sysctl_handle_int(oidp, &result, 0, req); 6665 if (error || (req->newptr == NULL)) 6666 return (error); 6667 6668 if (result < 0x8000) { 6669 sc = (struct bge_softc *)arg1; 6670 val = APE_READ_4(sc, result); 6671 printf("reg 0x%06X = 0x%08X\n", result, val); 6672 } 6673 6674 return (error); 6675} 6676 6677static int 6678bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS) 6679{ 6680 struct bge_softc *sc; 6681 int error; 6682 uint16_t result; 6683 uint32_t val; 6684 6685 result = -1; 6686 error = sysctl_handle_int(oidp, &result, 0, req); 6687 if (error || (req->newptr == NULL)) 6688 return (error); 6689 6690 if (result < 0x8000) { 6691 sc = (struct bge_softc *)arg1; 6692 val = bge_readmem_ind(sc, result); 6693 printf("mem 0x%06X = 0x%08X\n", result, val); 6694 } 6695 6696 return (error); 6697} 6698#endif 6699 6700static int 6701bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]) 6702{ 6703 6704 if (sc->bge_flags & BGE_FLAG_EADDR) 6705 return (1); 6706 6707#ifdef __sparc64__ 6708 OF_getetheraddr(sc->bge_dev, ether_addr); 6709 return (0); 6710#endif 6711 return (1); 6712} 6713 6714static int 6715bge_get_eaddr_mem(struct bge_softc *sc, uint8_t ether_addr[]) 6716{ 6717 uint32_t mac_addr; 6718 6719 mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_HIGH_MB); 6720 if ((mac_addr >> 16) == 0x484b) { 6721 ether_addr[0] = (uint8_t)(mac_addr >> 8); 6722 ether_addr[1] = (uint8_t)mac_addr; 6723 mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_LOW_MB); 6724 ether_addr[2] = (uint8_t)(mac_addr >> 24); 6725 ether_addr[3] = (uint8_t)(mac_addr >> 16); 6726 ether_addr[4] = (uint8_t)(mac_addr >> 8); 6727 ether_addr[5] = (uint8_t)mac_addr; 6728 return (0); 6729 } 6730 return (1); 6731} 6732 6733static int 6734bge_get_eaddr_nvram(struct bge_softc *sc, uint8_t ether_addr[]) 6735{ 6736 int mac_offset = BGE_EE_MAC_OFFSET; 6737 6738 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 6739 mac_offset = BGE_EE_MAC_OFFSET_5906; 6740 6741 return (bge_read_nvram(sc, ether_addr, mac_offset + 2, 6742 ETHER_ADDR_LEN)); 6743} 6744 6745static int 6746bge_get_eaddr_eeprom(struct bge_softc *sc, uint8_t ether_addr[]) 6747{ 6748 6749 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 6750 return (1); 6751 6752 return (bge_read_eeprom(sc, ether_addr, BGE_EE_MAC_OFFSET + 2, 6753 ETHER_ADDR_LEN)); 6754} 6755 6756static int 6757bge_get_eaddr(struct bge_softc *sc, uint8_t eaddr[]) 6758{ 6759 static const bge_eaddr_fcn_t bge_eaddr_funcs[] = { 6760 /* NOTE: Order is critical */ 6761 bge_get_eaddr_fw, 6762 bge_get_eaddr_mem, 6763 bge_get_eaddr_nvram, 6764 bge_get_eaddr_eeprom, 6765 NULL 6766 }; 6767 const bge_eaddr_fcn_t *func; 6768 6769 for (func = bge_eaddr_funcs; *func != NULL; ++func) { 6770 if ((*func)(sc, eaddr) == 0) 6771 break; 6772 } 6773 return (*func == NULL ? ENXIO : 0); 6774} 6775 6776static uint64_t 6777bge_get_counter(if_t ifp, ift_counter cnt) 6778{ 6779 struct bge_softc *sc; 6780 struct bge_mac_stats *stats; 6781 6782 sc = if_getsoftc(ifp); 6783 if (!BGE_IS_5705_PLUS(sc)) 6784 return (if_get_counter_default(ifp, cnt)); 6785 stats = &sc->bge_mac_stats; 6786 6787 switch (cnt) { 6788 case IFCOUNTER_IERRORS: 6789 return (stats->NoMoreRxBDs + stats->InputDiscards + 6790 stats->InputErrors); 6791 case IFCOUNTER_COLLISIONS: 6792 return (stats->etherStatsCollisions); 6793 default: 6794 return (if_get_counter_default(ifp, cnt)); 6795 } 6796} 6797