ohci_pci.c revision 330897
1/*- 2 * SPDX-License-Identifier: BSD-2-Clause-NetBSD 3 * 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (augustss@carlstedt.se) at 9 * Carlstedt Research & Technology. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: stable/11/sys/dev/usb/controller/ohci_pci.c 330897 2018-03-14 03:19:51Z eadler $"); 35 36/* 37 * USB Open Host Controller driver. 38 * 39 * OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf 40 */ 41 42/* The low level controller code for OHCI has been split into 43 * PCI probes and OHCI specific code. This was done to facilitate the 44 * sharing of code between *BSD's 45 */ 46 47#include <sys/stdint.h> 48#include <sys/stddef.h> 49#include <sys/param.h> 50#include <sys/queue.h> 51#include <sys/types.h> 52#include <sys/systm.h> 53#include <sys/kernel.h> 54#include <sys/bus.h> 55#include <sys/module.h> 56#include <sys/lock.h> 57#include <sys/mutex.h> 58#include <sys/condvar.h> 59#include <sys/sysctl.h> 60#include <sys/sx.h> 61#include <sys/unistd.h> 62#include <sys/callout.h> 63#include <sys/malloc.h> 64#include <sys/priv.h> 65 66#include <dev/usb/usb.h> 67#include <dev/usb/usbdi.h> 68 69#include <dev/usb/usb_core.h> 70#include <dev/usb/usb_busdma.h> 71#include <dev/usb/usb_process.h> 72#include <dev/usb/usb_util.h> 73 74#include <dev/usb/usb_controller.h> 75#include <dev/usb/usb_bus.h> 76#include <dev/usb/usb_pci.h> 77#include <dev/usb/controller/ohci.h> 78#include <dev/usb/controller/ohcireg.h> 79#include "usb_if.h" 80 81#define PCI_OHCI_VENDORID_ACERLABS 0x10b9 82#define PCI_OHCI_VENDORID_AMD 0x1022 83#define PCI_OHCI_VENDORID_APPLE 0x106b 84#define PCI_OHCI_VENDORID_ATI 0x1002 85#define PCI_OHCI_VENDORID_CMDTECH 0x1095 86#define PCI_OHCI_VENDORID_NEC 0x1033 87#define PCI_OHCI_VENDORID_NVIDIA 0x12D2 88#define PCI_OHCI_VENDORID_NVIDIA2 0x10DE 89#define PCI_OHCI_VENDORID_OPTI 0x1045 90#define PCI_OHCI_VENDORID_SIS 0x1039 91#define PCI_OHCI_VENDORID_SUN 0x108e 92 93#define PCI_OHCI_BASE_REG 0x10 94 95static device_probe_t ohci_pci_probe; 96static device_attach_t ohci_pci_attach; 97static device_detach_t ohci_pci_detach; 98static usb_take_controller_t ohci_pci_take_controller; 99 100static int 101ohci_pci_take_controller(device_t self) 102{ 103 uint32_t reg; 104 uint32_t int_line; 105 106 if (pci_get_powerstate(self) != PCI_POWERSTATE_D0) { 107 device_printf(self, "chip is in D%d mode " 108 "-- setting to D0\n", pci_get_powerstate(self)); 109 reg = pci_read_config(self, PCI_CBMEM, 4); 110 int_line = pci_read_config(self, PCIR_INTLINE, 4); 111 pci_set_powerstate(self, PCI_POWERSTATE_D0); 112 pci_write_config(self, PCI_CBMEM, reg, 4); 113 pci_write_config(self, PCIR_INTLINE, int_line, 4); 114 } 115 return (0); 116} 117 118static const char * 119ohci_pci_match(device_t self) 120{ 121 uint32_t device_id = pci_get_devid(self); 122 123 switch (device_id) { 124 case 0x523710b9: 125 return ("AcerLabs M5237 (Aladdin-V) USB controller"); 126 127 case 0x740c1022: 128 return ("AMD-756 USB Controller"); 129 case 0x74141022: 130 return ("AMD-766 USB Controller"); 131 case 0x78071022: 132 return ("AMD FCH USB Controller"); 133 134 case 0x43741002: 135 return "ATI SB400 USB Controller"; 136 case 0x43751002: 137 return "ATI SB400 USB Controller"; 138 case 0x43971002: 139 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 140 case 0x43981002: 141 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 142 case 0x43991002: 143 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 144 145 case 0x06701095: 146 return ("CMD Tech 670 (USB0670) USB controller"); 147 148 case 0x06731095: 149 return ("CMD Tech 673 (USB0673) USB controller"); 150 151 case 0xc8611045: 152 return ("OPTi 82C861 (FireLink) USB controller"); 153 154 case 0x00351033: 155 return ("NEC uPD 9210 USB controller"); 156 157 case 0x00d710de: 158 return ("nVidia nForce3 USB Controller"); 159 160 case 0x005a10de: 161 return ("nVidia nForce CK804 USB Controller"); 162 case 0x036c10de: 163 return ("nVidia nForce MCP55 USB Controller"); 164 case 0x03f110de: 165 return ("nVidia nForce MCP61 USB Controller"); 166 case 0x0aa510de: 167 return ("nVidia nForce MCP79 USB Controller"); 168 case 0x0aa710de: 169 return ("nVidia nForce MCP79 USB Controller"); 170 case 0x0aa810de: 171 return ("nVidia nForce MCP79 USB Controller"); 172 173 case 0x70011039: 174 return ("SiS 5571 USB controller"); 175 176 case 0x1103108e: 177 return "Sun PCIO-2 USB controller"; 178 179 case 0x0019106b: 180 return ("Apple KeyLargo USB controller"); 181 case 0x003f106b: 182 return ("Apple KeyLargo/Intrepid USB controller"); 183 184 default: 185 break; 186 } 187 if ((pci_get_class(self) == PCIC_SERIALBUS) && 188 (pci_get_subclass(self) == PCIS_SERIALBUS_USB) && 189 (pci_get_progif(self) == PCI_INTERFACE_OHCI)) { 190 return ("OHCI (generic) USB controller"); 191 } 192 return (NULL); 193} 194 195static int 196ohci_pci_probe(device_t self) 197{ 198 const char *desc = ohci_pci_match(self); 199 200 if (desc) { 201 device_set_desc(self, desc); 202 return (0); 203 } else { 204 return (ENXIO); 205 } 206} 207 208static int 209ohci_pci_attach(device_t self) 210{ 211 ohci_softc_t *sc = device_get_softc(self); 212 int rid; 213 int err; 214 215 /* initialise some bus fields */ 216 sc->sc_bus.parent = self; 217 sc->sc_bus.devices = sc->sc_devices; 218 sc->sc_bus.devices_max = OHCI_MAX_DEVICES; 219 sc->sc_bus.dma_bits = 32; 220 221 /* get all DMA memory */ 222 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), 223 &ohci_iterate_hw_softc)) { 224 return (ENOMEM); 225 } 226 sc->sc_dev = self; 227 228 pci_enable_busmaster(self); 229 230 /* 231 * Some Sun PCIO-2 USB controllers have their intpin register 232 * bogusly set to 0, although it should be 4. Correct that. 233 */ 234 if (pci_get_devid(self) == 0x1103108e && pci_get_intpin(self) == 0) 235 pci_set_intpin(self, 4); 236 237 rid = PCI_CBMEM; 238 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 239 RF_ACTIVE); 240 if (!sc->sc_io_res) { 241 device_printf(self, "Could not map memory\n"); 242 goto error; 243 } 244 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 245 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 246 sc->sc_io_size = rman_get_size(sc->sc_io_res); 247 248 rid = 0; 249 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 250 RF_SHAREABLE | RF_ACTIVE); 251 if (sc->sc_irq_res == NULL) { 252 device_printf(self, "Could not allocate irq\n"); 253 goto error; 254 } 255 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 256 if (!sc->sc_bus.bdev) { 257 device_printf(self, "Could not add USB device\n"); 258 goto error; 259 } 260 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 261 262 /* 263 * ohci_pci_match will never return NULL if ohci_pci_probe 264 * succeeded 265 */ 266 device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self)); 267 switch (pci_get_vendor(self)) { 268 case PCI_OHCI_VENDORID_ACERLABS: 269 sprintf(sc->sc_vendor, "AcerLabs"); 270 break; 271 case PCI_OHCI_VENDORID_AMD: 272 sprintf(sc->sc_vendor, "AMD"); 273 break; 274 case PCI_OHCI_VENDORID_APPLE: 275 sprintf(sc->sc_vendor, "Apple"); 276 break; 277 case PCI_OHCI_VENDORID_ATI: 278 sprintf(sc->sc_vendor, "ATI"); 279 break; 280 case PCI_OHCI_VENDORID_CMDTECH: 281 sprintf(sc->sc_vendor, "CMDTECH"); 282 break; 283 case PCI_OHCI_VENDORID_NEC: 284 sprintf(sc->sc_vendor, "NEC"); 285 break; 286 case PCI_OHCI_VENDORID_NVIDIA: 287 case PCI_OHCI_VENDORID_NVIDIA2: 288 sprintf(sc->sc_vendor, "nVidia"); 289 break; 290 case PCI_OHCI_VENDORID_OPTI: 291 sprintf(sc->sc_vendor, "OPTi"); 292 break; 293 case PCI_OHCI_VENDORID_SIS: 294 sprintf(sc->sc_vendor, "SiS"); 295 break; 296 case PCI_OHCI_VENDORID_SUN: 297 sprintf(sc->sc_vendor, "SUN"); 298 break; 299 default: 300 if (bootverbose) { 301 device_printf(self, "(New OHCI DeviceId=0x%08x)\n", 302 pci_get_devid(self)); 303 } 304 sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 305 } 306 307 /* sc->sc_bus.usbrev; set by ohci_init() */ 308 309#if (__FreeBSD_version >= 700031) 310 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 311 NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 312#else 313 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 314 (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 315#endif 316 if (err) { 317 device_printf(self, "Could not setup irq, %d\n", err); 318 sc->sc_intr_hdl = NULL; 319 goto error; 320 } 321 err = ohci_init(sc); 322 if (!err) { 323 err = device_probe_and_attach(sc->sc_bus.bdev); 324 } 325 if (err) { 326 device_printf(self, "USB init failed\n"); 327 goto error; 328 } 329 return (0); 330 331error: 332 ohci_pci_detach(self); 333 return (ENXIO); 334} 335 336static int 337ohci_pci_detach(device_t self) 338{ 339 ohci_softc_t *sc = device_get_softc(self); 340 341 /* during module unload there are lots of children leftover */ 342 device_delete_children(self); 343 344 pci_disable_busmaster(self); 345 346 if (sc->sc_irq_res && sc->sc_intr_hdl) { 347 /* 348 * only call ohci_detach() after ohci_init() 349 */ 350 ohci_detach(sc); 351 352 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 353 354 if (err) { 355 /* XXX or should we panic? */ 356 device_printf(self, "Could not tear down irq, %d\n", 357 err); 358 } 359 sc->sc_intr_hdl = NULL; 360 } 361 if (sc->sc_irq_res) { 362 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 363 sc->sc_irq_res = NULL; 364 } 365 if (sc->sc_io_res) { 366 bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, 367 sc->sc_io_res); 368 sc->sc_io_res = NULL; 369 } 370 usb_bus_mem_free_all(&sc->sc_bus, &ohci_iterate_hw_softc); 371 372 return (0); 373} 374 375static device_method_t ohci_pci_methods[] = { 376 /* Device interface */ 377 DEVMETHOD(device_probe, ohci_pci_probe), 378 DEVMETHOD(device_attach, ohci_pci_attach), 379 DEVMETHOD(device_detach, ohci_pci_detach), 380 DEVMETHOD(device_suspend, bus_generic_suspend), 381 DEVMETHOD(device_resume, bus_generic_resume), 382 DEVMETHOD(device_shutdown, bus_generic_shutdown), 383 DEVMETHOD(usb_take_controller, ohci_pci_take_controller), 384 385 DEVMETHOD_END 386}; 387 388static driver_t ohci_driver = { 389 .name = "ohci", 390 .methods = ohci_pci_methods, 391 .size = sizeof(struct ohci_softc), 392}; 393 394static devclass_t ohci_devclass; 395 396DRIVER_MODULE(ohci, pci, ohci_driver, ohci_devclass, 0, 0); 397MODULE_DEPEND(ohci, usb, 1, 1, 1); 398