MFC: r292180 (partial), r297127 (partial), r311911, r311923, r312939,
r313250, r313712, r314811 (partial), r314887 (partial), r315430,
r317981, r315466

o Move the DRIVER_MODULE() statements that declare mmc(4) to be a child
of the various bridge drivers out of dev/mmc.c and into the bridge
drivers.

o Add ACPI platform support for SDHCI driver.

o Fix some overly long lines, whitespace and other bugs according to
style(9) as well as spelling etc. in mmc(4), mmcsd(4) and sdhci(4).

o In the mmc(4) bridges and sdhci(4) (bus) front-ends:
- Remove redundant assignments of the default bus_generic_print_child
device method,
- use DEVMETHOD_END,
- use NULL instead of 0 for pointers.

o Trim/adjust includes.

o Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges
as kernel drivers and their dependency onto mmc(4).

o Add support for eMMC "partitions". Besides the user data area, i. e.
the default partition, eMMC v4.41 and later devices can additionally
provide up to:
1 enhanced user data area partition
2 boot partitions
1 RPMB (Replay Protected Memory Block) partition
4 general purpose partitions (optionally with a enhanced or extended
attribute)

Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
code in the boot partitions etc., another use case for the partition
support is the activation of pseudo-SLC mode, which manufacturers of
eMMC chips typically associate with the enhanced user data area and/
or the enhanced attribute of general purpose partitions.

CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.

o Now that properly issuing CMD6 is crucial (so data isn't written to
the wrong partition for example), make a step into the direction of
correctly handling the timeout for these commands in the MMC layer.
Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
recommended by relevant specifications.

o Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
with Linux so that the GNU mmc-utils can be ported to and used with
FreeBSD (note that due to the remaining deficiencies outlined above
SANITIZE operations issued by/with `mmc` currently most likely will
fail). These latter have been added to ports as sysutils/mmc-utils.
Among others, the `mmc` tool of mmc-utils allows for partitioning
eMMC devices (tested working).

o For devices following the eMMC specification v4.41 or later, year 0
is 2013 rather than 1997; so correct this for assembling the device
ID string properly.

o Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
least for some of the above a matching pair is required.

MFC r273799:

Make the GPIO children attach to the first unit available and not only to
unit 0.

This fix a bug where a GPIO controller could fail to attach its children
(gpioc and gpiobus) if another GPIO driver attach first.

MFC r277454, r277460, r277465, r277466, r277467, r277469, r277470, r277471,
r277472, r277473, r277474, r277475, r277476, r277477, r277478, r277479,
r277480, r277512, r277516:

Add inline implementations of arm bus_space_read/write_N().

Revise the arm bus_space implementation to avoid dereferencing the tag on
every operation to retrieve the bs_cookie value almost nothing actually uses.

Use the explicit member initializer style to init the bus_space struct.

Use arm/bus_space-v6.c for all armv6 systems

Consolidate many identical implementations of bus_space to a single
common tag and implementation shared by armv4 and armv6.

Micro-optimize the new arm inline bus_space implementation by grouping all
the data the inline functions access together at the start of the bus_space
struct so that they all fit in a single cache line.

MFC r266969 and r276717:
Add 64-bit DMA support in the XHCI controller driver.
- Fix some comments and whitespaces while at it.
- Add support for PAE.

MFC 262952, 262958, 262966, 262979, 262980, 262986, 262987, 262995, 262997,
263030, 263033, 263034, 263056, 263057,

Remove all the redundant external declarations of exception vectors and
runtime setting of the pointers that's scattered around various places.

Remove all traces of support for ARM chips prior to the arm9 series.

Make the default exception handler vectors point to where I thought they
were already pointing: the default handlers (not a panic that says there
is no default handler).

Eliminate irq_dispatch.S. Move the data items it contained into
arm/intr.c and the functionality it provided into arm/exception.S.

Move the exception vector table (so-called "page0" data) into exception.S
and eliminate vectors.S.

Change the way the asm GET_CURTHREAD_PTR() macro is defined so that code
using it doesn't have to have an "AST_LOCALS" macro somewhere in the file.

Arrange for arm fork_trampoline() to return to userland via the standard
swi_exit code in exception.S instead of having its own inline expansion
of the DO_AST and PULLFRAME macros.

Now that the PUSHFRAME and PULLFRAME macros are used only in the swi
entry/exit code, they don't need to be macros. Except that didn't work
and the whole change was reverted.

Remove some unnecessary indirection and jump right to the handler functions.

Use panic rather than printf to "handle" an arm26 address exception
(should never happen on arm32).

Remove the unreferenced DATA() macro.

Remove #include <machine/asmacros.h> from files that don't need it.

MFC r262534, r262548, r262549, r262552, r262568, r262581, r262583, r262584,
r262585, r262587, r262696, r262712

Replace many pasted identical definitions of cpu_initclocks() with a common
implementation in arm/machdep.c.

aicasm: Don't complain about missing prototypes to ease bootstrap issues.

Vybrid: Add driver for Inter-Integrated Circuit (I2C).

imx6: Initialize the Low Power Mode bits to keep the ARM cores running
during WFI.

All our current ARM multi-core systems have all cores in one package with
a shared L2 cache, reflect that in the common cpu_topo() routine.

mpcore timer: Supply a DELAY() implementation via weak linkage, so that
SoC-specific code can supply a better implementation.

imx6: Add some rudimentary voltage control.

Add an armv7 implementation of cpu_sleep().

Add __used attribute so that the DELAY implementation doesn't get
optimized away as unreferenced, causing linker errors when trying to
resolve the weak reference to the missing function.

MFC r261410

Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
r261353

Fix the name of the dts file for the HL201...

When mapping an address, the bsh needs the same offset we do for other things.

Add explicit depends on bus_if.h and device_if.h to avoid a
chicken and egg problem in some compilation environments.

Switch to using PAs rather than VAs for the addresses we map for
devices. This is a nop, except for what's reported by atmelbus for the
resources.

Comment cleanups. Move things around for diff reduction against FDT work.

MFC r257738, r259202, r258410, r260288, r260292, r260294, r260320, r260323,
r260326, r260327, r260331, r260333, r260340, r260371, r260372, r260373,
r260374, r260375

Add common bus_space tag definition shared for most supported ARMv6/v7 SoCs.
Correct license statements to reflect the fact that these files were all
derived from sys/arm/mv/bus_space.c.

In pmap_unmapdev(), remember the size, and use that as an argument to
kva_free(), or we'd end up always passing it a size of 0

In pmap_mapdev(), first check whether a static mapping exists,

Convert TI static device mapping to use the new arm_devmap_add_entry(),

Use the common armv6 fdt_bus_tag defintion for tegra instead of a local copy.

Eliminate use of fdt_immr_addr(), it's not needed for tegra

Convert lpc from using fdt_immr style to arm_devmap_add_entry() to make
static device mappings.

Retire machine/fdt.h as a header used by MI code, as its function is now
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
(aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
requests to its parent (nexus). This allows x86 FDT devices to allocate
both memory and IO requests and removes the last notionally MI use of
fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
FDT_MAP_IRQ and FDT_INTR_MAX have been removed.

Add #include <machine/fdt.h> to a few files that used to get it via pollution

Enable the mv cesa security/crypto device by providing the required property
in the dts source, and adding the right devices to the kernel config.

Remove dev/fdt/fdt_pci.c, which was code specific to Marvell ARM SoCs,
related to setting up static device mappings. Since it was only used by
arm/mv/mv_pci.c, it's now just static functions within that file, plus
one public function that gets called only from arm/mv/mv_machdep.c.

Switch RPi to using arm_devmap_add_entry() to set up static device mapping.

Allow 'no static device mappings' to potentially work.

Don't try to find a static mapping before calling pmap_mapdev(), that logic
is now part of pmap_mapdev() and doesn't need to be duplicated here.

Switch a10 to using arm_devmap_add_entry() to set up static device mapping.

MFC r258779,r258780,r258787,r258822:

Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.

Similar to the (1 << 31) case it is not defined to do (2 << 30).

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

MFC r257127:

Remove all the instances of '#undef DEBUG' from kernel.

Suggested by: rpaulo
Approved by: adrian (mentor)

MFC r257669, r257672, r257673, r257676, r257678:

Call initarm_lastaddr() later in the init sequence, after establishing
static device mappings, rather than as the first of the initializations
that a platform can hook into. This allows a platform to allocate KVA
from the top of the address space downwards for things like static device
mapping, and return the final "last usable address" result after that and
other early init work is done.

Because some platforms were doing work in initarm_lastaddr() that needs to
be done early, add a new initarm_early_init() routine and move the early
init code to that routine on those platforms.

Make PTE_DEVICE a synonym for PTE_NOCACHE on armv4, to make it easier to
share the same code on both architectures.

Add new helper routines for arm static device mapping. The new code
allocates kva space from the top down for the device mappings and builds
entries in an internal table which is automatically used later by
arm_devmap_bootstrap(). The platform code just calls the new
arm_devmap_add_entry() function as many times as it needs to (up to 32
entries allowed; most platforms use 2 or 3 at most).

Remove imx local devmap code and use the essentially identical common
code that got moved from imx_machdep.c to arm/devmap.c.

MFC r257648, r257649, r257660:

Begin reducing code duplication in arm pmap.c and pmap-v6.c by factoring
out common code related to mapping device memory into a new devmap.c file.

Remove the growing duplication of code that used pmap_devmap_find_pa() and
then did some math with the returned results to generate a virtual address,
and likewise in reverse to get a physical address. Now there are a pair
of functions, arm_devmap_vtop() and arm_devmap_ptov(), to do that. The
bus_space_map() implementations are rewritten in terms of these.

Move remaining code and data related to static device mapping into the
new devmap.[ch] files. Emphasize the MD nature of these things by using
the prefix arm_devmap_ on the function and type names (already a few of
these things found their way into MI code, hopefully it will be harder to
do by accident in the future).

MFC r257258, r257265: Include headers (if_var.h and others) where needed.

The change that triggered the need for this on head was r257244. That
hasn't been MFC'd yet, but there's no harm in paving the way for it with
this MFC.

MFC r257201, r257202

Retire arm_remap_nocache() and the data and constants associated with it.

MFC r257199, r257200, r257217:

Remove all #include <machine/pmap.h> from arm code. It's already
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.

Remove #include <machine/frame.h> from all the arm code that doesn't
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.

Remove the last dregs of trapframe_t. It turns out only arm was using
this type, so remove it to make arm code more consistant with other
platforms.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFcalloutng:
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking about practical inexpediency.
This change legitimates the status quo and cleans up the code.

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually

Fix typo; s/ouput/output

Merge the FDT versions of initarm.

The copies of initarm used on platforms with FDT support were almost
identical. The differences were pulled out into separate functions that
were called by initarm.

This change merges the, now identical, copies of initarm and a few of it's
support functions. This is a step towards a common kernel on ARMv6.

Merge r242125 into the other ARMv6 copies of initarm.

Move the call to platform_gpio_init() into initarm_gpio_init() to reduce
the diff to the other FDT versions of initarm.

Create the new initarm_ functions to reduce the diff to the other FDT
versions of initarm

Use arm_dump_avail_init to build the dump_avail array

Start to clean up the lpc initarm as it also uses FDT.

Update different versions of physmap_init to be identical in preparation
for merging them.

Reduce the diff between the FDT implementations of initarm.
This only touches whitespace and comments.

Create a common set_stackptrs in sys/arm/machdep.c.

On single core devices set_stackptrs is only ever called with cpu = 0 in
initarm and will be identical to the existing function. On SMP this needs
to be implemented for sys/arm/mp_machdep.c, but the implementations are
identical for each SoC.

Set machine correctly on ARM. This allows universe to use the correct world
when building each kernel.

Reviewed by: imp

Switch lpc initarm() to use struct arm_boot_params and therefore fix
EA3250 kernel build.

Approved by: gonzo

Merging of projects/armv6, part 8

r235162:

Initial LPC32x0 support. Includes DTS file for Embedded Artists EA3250
board.

Peripherals currently supported:
- Serial ports
- Interrupt controller
- Timers
- Ethernet
- USB host
- Framebuffer (in conjunction with SSD1289 LCD controller)
- RTC
- SPI
- GPIO

Submitted by: Jakub Wojciech Klama <jceel@freebsd.org>