Searched +hist:2 +hist:f221d6f (Results 1 - 25 of 55) sorted by last modified time
/linux-master/fs/9p/ | ||
H A D | vfs_inode_dotl.c | diff 2dc92e59 Fri Jan 05 10:17:35 MST 2024 Eric Van Hensbergen <ericvh@kernel.org> fs/9p: Eliminate redundant non-cache path in mknod Like symlink, mknod had a seperate path with different inode allocation -- but this seems unnecessary, so eliminating this path. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> diff 0d72b928 Mon Aug 07 13:38:33 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff cf7c33d3 Wed May 03 01:49:29 MDT 2023 Dominique Martinet <asmadeus@codewreck.org> 9p: remove dead stores (variable set again without being read) The 9p code for some reason used to initialize variables outside of the declaration, e.g. instead of just initializing the variable like this: int retval = 0 We would be doing this: int retval; retval = 0; This is perfectly fine and the compiler will just optimize dead stores anyway, but scan-build seems to think this is a problem and there are many of these warnings making the output of scan-build full of such warnings: fs/9p/vfs_inode.c:916:2: warning: Value stored to 'retval' is never read [deadcode.DeadStores] retval = 0; ^ ~ I have no strong opinion here, but if we want to regularly run scan-build we should fix these just to silence the messages. I've confirmed these all are indeed ok to remove. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> diff d9bc0d11 Wed Dec 07 19:40:37 MST 2022 Eric Van Hensbergen <ericvh@kernel.org> fs/9p: Consolidate file operations and add readahead and writeback We had 3 different sets of file operations across 2 different protocol variants differentiated by cache which really only changed 3 functions. But the real problem is that certain file modes, mount options, and other factors weren't being considered when we decided whether or not to use caches. This consolidates all the operations and switches to conditionals within a common set to decide whether or not to do different aspects of caching. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> diff beca774f Sun Jun 12 01:00:05 MDT 2022 Dominique Martinet <asmadeus@codewreck.org> 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl We need to release directory fid if we fail halfway through open This fixes fid leaking with xfstests generic 531 Link: https://lkml.kernel.org/r/20220612085330.1451496-2-asmadeus@codewreck.org Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct") Cc: stable@vger.kernel.org Reported-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> diff 24e42e32 Wed Nov 18 02:06:42 MST 2020 David Howells <dhowells@redhat.com> 9p: Use fscache indexing rewrite and reenable caching Change the 9p filesystem to take account of the changes to fscache's indexing rewrite and reenable caching in 9p. The following changes have been made: (1) The fscache_netfs struct is no more, and there's no need to register the filesystem as a whole. (2) The session cookie is now an fscache_volume cookie, allocated with fscache_acquire_volume(). That takes three parameters: a string representing the "volume" in the index, a string naming the cache to use (or NULL) and a u64 that conveys coherency metadata for the volume. For 9p, I've made it render the volume name string as: "9p,<devname>,<cachetag>" where the cachetag is replaced by the aname if it wasn't supplied. This probably needs rethinking a bit as the aname can have slashes in it. It might be better to hash the cachetag and use the hash or I could substitute commas for the slashes or something. (3) The fscache_cookie_def is no more and needed information is passed directly to fscache_acquire_cookie(). The cache no longer calls back into the filesystem, but rather metadata changes are indicated at other times. fscache_acquire_cookie() is passed the same keying and coherency information as before. (4) The functions to set/reset/flush cookies are removed and fscache_use_cookie() and fscache_unuse_cookie() are used instead. fscache_use_cookie() is passed a flag to indicate if the cookie is opened for writing. fscache_unuse_cookie() is passed updates for the metadata if we changed it (ie. if the file was opened for writing). These are called when the file is opened or closed. (5) wait_on_page_bit[_killable]() is replaced with the specific wait functions for the bits waited upon. (6) I've got rid of some of the 9p-specific cache helper functions and called things like fscache_relinquish_cookie() directly as they'll optimise away if v9fs_inode_cookie() returns an unconditional NULL (which will be the case if CONFIG_9P_FSCACHE=n). (7) v9fs_vfs_setattr() is made to call fscache_resize() to change the size of the cache object. Notes: (A) We should call fscache_invalidate() if we detect that the server's copy of a file got changed by a third party, but I don't know where to do that. We don't need to do that when allocating the cookie as we get a check-and-invalidate when we initially bind to the cache object. (B) The copy-to-cache-on-writeback side of things will be handled in separate patch. Changes ======= ver #3: - Canonicalise the cookie key and coherency data to make them endianness-independent. ver #2: - Use gfpflags_allow_blocking() rather than using flag directly. - fscache_acquire_volume() now returns errors. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dominique Martinet <asmadeus@codewreck.org> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: v9fs-developer@lists.sourceforge.net cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819664645.215744.1555314582005286846.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906975017.143852.3459573173204394039.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967178512.1823006.17377493641569138183.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021573143.640689.3977487095697717967.stgit@warthog.procyon.org.uk/ # v4 diff 24e42e32 Wed Nov 18 02:06:42 MST 2020 David Howells <dhowells@redhat.com> 9p: Use fscache indexing rewrite and reenable caching Change the 9p filesystem to take account of the changes to fscache's indexing rewrite and reenable caching in 9p. The following changes have been made: (1) The fscache_netfs struct is no more, and there's no need to register the filesystem as a whole. (2) The session cookie is now an fscache_volume cookie, allocated with fscache_acquire_volume(). That takes three parameters: a string representing the "volume" in the index, a string naming the cache to use (or NULL) and a u64 that conveys coherency metadata for the volume. For 9p, I've made it render the volume name string as: "9p,<devname>,<cachetag>" where the cachetag is replaced by the aname if it wasn't supplied. This probably needs rethinking a bit as the aname can have slashes in it. It might be better to hash the cachetag and use the hash or I could substitute commas for the slashes or something. (3) The fscache_cookie_def is no more and needed information is passed directly to fscache_acquire_cookie(). The cache no longer calls back into the filesystem, but rather metadata changes are indicated at other times. fscache_acquire_cookie() is passed the same keying and coherency information as before. (4) The functions to set/reset/flush cookies are removed and fscache_use_cookie() and fscache_unuse_cookie() are used instead. fscache_use_cookie() is passed a flag to indicate if the cookie is opened for writing. fscache_unuse_cookie() is passed updates for the metadata if we changed it (ie. if the file was opened for writing). These are called when the file is opened or closed. (5) wait_on_page_bit[_killable]() is replaced with the specific wait functions for the bits waited upon. (6) I've got rid of some of the 9p-specific cache helper functions and called things like fscache_relinquish_cookie() directly as they'll optimise away if v9fs_inode_cookie() returns an unconditional NULL (which will be the case if CONFIG_9P_FSCACHE=n). (7) v9fs_vfs_setattr() is made to call fscache_resize() to change the size of the cache object. Notes: (A) We should call fscache_invalidate() if we detect that the server's copy of a file got changed by a third party, but I don't know where to do that. We don't need to do that when allocating the cookie as we get a check-and-invalidate when we initially bind to the cache object. (B) The copy-to-cache-on-writeback side of things will be handled in separate patch. Changes ======= ver #3: - Canonicalise the cookie key and coherency data to make them endianness-independent. ver #2: - Use gfpflags_allow_blocking() rather than using flag directly. - fscache_acquire_volume() now returns errors. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dominique Martinet <asmadeus@codewreck.org> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: v9fs-developer@lists.sourceforge.net cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819664645.215744.1555314582005286846.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906975017.143852.3459573173204394039.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967178512.1823006.17377493641569138183.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021573143.640689.3977487095697717967.stgit@warthog.procyon.org.uk/ # v4 diff 024b7d6a Tue Nov 02 07:12:01 MDT 2021 Dominique Martinet <asmadeus@codewreck.org> 9p: fix file headers - add missing SPDX-License-Identifier - remove (sometimes incorrect) file name from file header Link: http://lkml.kernel.org/r/20211102134608.1588018-2-dominique.martinet@atmark-techno.com Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> diff bc868036 Mon Oct 04 15:07:22 MDT 2021 David Howells <dhowells@redhat.com> 9p: Fix a bunch of kerneldoc warnings shown up by W=1 Fix a bunch of kerneldoc warnings shown up by W=1 in the 9p filesystem: (1) Add/remove/fix kerneldoc parameters descriptions. (2) Move __add_fid() from between v9fs_fid_add() and its comment. (3) 9p's caches_show() doesn't really make sense as an API function, so remove the kerneldoc annotation. It's also not prefixed with 'v9fs_'. Also remove the kerneldoc markers from the 9p fscache wrappers. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Mauro Carvalho Chehab <mchehab@kernel.org> cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/ # rfc v1 Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/ # rfc v2 diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
H A D | vfs_inode.c | diff 100ccd18 Fri Nov 24 06:39:02 MST 2023 David Howells <dhowells@redhat.com> netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org diff 0d72b928 Mon Aug 07 13:38:33 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff cf7c33d3 Wed May 03 01:49:29 MDT 2023 Dominique Martinet <asmadeus@codewreck.org> 9p: remove dead stores (variable set again without being read) The 9p code for some reason used to initialize variables outside of the declaration, e.g. instead of just initializing the variable like this: int retval = 0 We would be doing this: int retval; retval = 0; This is perfectly fine and the compiler will just optimize dead stores anyway, but scan-build seems to think this is a problem and there are many of these warnings making the output of scan-build full of such warnings: fs/9p/vfs_inode.c:916:2: warning: Value stored to 'retval' is never read [deadcode.DeadStores] retval = 0; ^ ~ I have no strong opinion here, but if we want to regularly run scan-build we should fix these just to silence the messages. I've confirmed these all are indeed ok to remove. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> diff d9bc0d11 Wed Dec 07 19:40:37 MST 2022 Eric Van Hensbergen <ericvh@kernel.org> fs/9p: Consolidate file operations and add readahead and writeback We had 3 different sets of file operations across 2 different protocol variants differentiated by cache which really only changed 3 functions. But the real problem is that certain file modes, mount options, and other factors weren't being considered when we decided whether or not to use caches. This consolidates all the operations and switches to conditionals within a common set to decide whether or not to do different aspects of caching. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> diff 874c8ca1 Thu Jun 09 14:46:04 MDT 2022 David Howells <dhowells@redhat.com> netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 874c8ca1 Thu Jun 09 14:46:04 MDT 2022 David Howells <dhowells@redhat.com> netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 874c8ca1 Thu Jun 09 14:46:04 MDT 2022 David Howells <dhowells@redhat.com> netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 874c8ca1 Thu Jun 09 14:46:04 MDT 2022 David Howells <dhowells@redhat.com> netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 874c8ca1 Thu Jun 09 14:46:04 MDT 2022 David Howells <dhowells@redhat.com> netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 874c8ca1 Thu Jun 09 14:46:04 MDT 2022 David Howells <dhowells@redhat.com> netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
/linux-master/fs/btrfs/ | ||
H A D | inode.c | diff 74e97958 Thu Mar 21 11:02:04 MDT 2024 Boris Burkov <boris@bur.io> btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction. However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation. The fix is to ensure that every qgroup PREALLOC reservation observes the following properties: 1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation. This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row. Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> diff 2b712e3b Thu Jan 25 09:44:47 MST 2024 David Sterba <dsterba@suse.com> btrfs: remove unused included headers With help of neovim, LSP and clangd we can identify header files that are not actually needed to be included in the .c files. This is focused only on removal (with minor fixups), further cleanups are possible but will require doing the header files properly with forward declarations, minimized includes and include-what-you-use care. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 1bd96c92 Thu Feb 01 17:09:22 MST 2024 Filipe Manana <fdmanana@suse.com> btrfs: reject encoded write if inode has nodatasum flag set Currently we allow an encoded write against inodes that have the NODATASUM flag set, either because they are NOCOW files or they were created while the filesystem was mounted with "-o nodatasum". This results in having compressed extents without corresponding checksums, which is a filesystem inconsistency reported by 'btrfs check'. For example, running btrfs/281 with MOUNT_OPTIONS="-o nodatacow" triggers this and 'btrfs check' errors out with: [1/7] checking root items [2/7] checking extents [3/7] checking free space tree [4/7] checking fs roots root 256 inode 257 errors 1040, bad file extent, some csum missing root 256 inode 258 errors 1040, bad file extent, some csum missing ERROR: errors found in fs roots (...) So reject encoded writes if the target inode has NODATASUM set. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 3324d054 Thu Jan 04 12:48:47 MST 2024 Omar Sandoval <osandov@fb.com> btrfs: avoid copying BTRFS_ROOT_SUBVOL_DEAD flag to snapshot of subvolume being deleted Sweet Tea spotted a race between subvolume deletion and snapshotting that can result in the root item for the snapshot having the BTRFS_ROOT_SUBVOL_DEAD flag set. The race is: Thread 1 | Thread 2 ----------------------------------------------|---------- btrfs_delete_subvolume | btrfs_set_root_flags(BTRFS_ROOT_SUBVOL_DEAD)| |btrfs_mksubvol | down_read(subvol_sem) | create_snapshot | ... | create_pending_snapshot | copy root item from source down_write(subvol_sem) | This flag is only checked in send and swap activate, which this would cause to fail mysteriously. create_snapshot() now checks the root refs to reject a deleted subvolume, so we can fix this by locking subvol_sem earlier so that the BTRFS_ROOT_SUBVOL_DEAD flag and the root refs are updated atomically. CC: stable@vger.kernel.org # 4.14+ Reported-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 00deaf04 Mon Dec 04 09:20:29 MST 2023 Filipe Manana <fdmanana@suse.com> btrfs: log messages at unpin_extent_range() during unexpected cases At unpin_extent_range() we trigger a WARN_ON() when we don't find an extent map or we find one with a start offset not matching the start offset of the target range. This however isn't very useful for debugging because: 1) We don't know which condition was triggered, as they are both in the same WARN_ON() call; 2) We don't know which inode was affected, from which root, for which range, what's the start offset of the extent map, and so on. So trigger a separate warning for each case and log a message for each case providing information about the inode, its root, the target range, the generation and the start offset of the extent map we found. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 7dc66abb Tue Nov 21 06:38:38 MST 2023 Filipe Manana <fdmanana@suse.com> btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 7dc66abb Tue Nov 21 06:38:38 MST 2023 Filipe Manana <fdmanana@suse.com> btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 7dc66abb Tue Nov 21 06:38:38 MST 2023 Filipe Manana <fdmanana@suse.com> btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 7dc66abb Tue Nov 21 06:38:38 MST 2023 Filipe Manana <fdmanana@suse.com> btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> diff 776a838f Tue Oct 17 02:00:31 MDT 2023 Naohiro Aota <naohiro.aota@wdc.com> btrfs: zoned: wait for data BG to be finished on direct IO allocation Running the fio command below on a ZNS device results in "Resource temporarily unavailable" error. $ sudo fio --name=w --directory=/mnt --filesize=1GB --bs=16MB --numjobs=16 \ --rw=write --ioengine=libaio --iodepth=128 --direct=1 fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=117440512, buflen=16777216 fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=134217728, buflen=16777216 ... This happens because -EAGAIN error returned from btrfs_reserve_extent() called from btrfs_new_extent_direct() is spilling over to the userland. btrfs_reserve_extent() returns -EAGAIN when there is no active zone available. Then, the caller should wait for some other on-going IO to finish a zone and retry the allocation. This logic is already implemented for buffered write in cow_file_range(), but it is missing for the direct IO counterpart. Implement the same logic for it. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 2ce543f47843 ("btrfs: zoned: wait until zone is finished when allocation didn't progress") CC: stable@vger.kernel.org # 6.1+ Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> |
/linux-master/mm/ | ||
H A D | shmem.c | diff a4af51ce Tue Feb 06 19:56:15 MST 2024 Kent Overstreet <kent.overstreet@linux.dev> fs: super_set_uuid() Some weird old filesytems have UUID-like things that we wish to expose as UUIDs, but are smaller; add a length field so that the new FS_IOC_(GET|SET)UUID ioctls can handle them in generic code. And add a helper super_set_uuid(), for setting nonstandard length uuids. Helper is now required for the new FS_IOC_GETUUID ioctl; if super_set_uuid() hasn't been called, the ioctl won't be supported. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20240207025624.1019754-2-kent.overstreet@linux.dev Signed-off-by: Christian Brauner <brauner@kernel.org> diff beb98686 Fri Sep 29 21:42:45 MDT 2023 Hugh Dickins <hughd@google.com> shmem,percpu_counter: add _limited_add(fbc, limit, amount) Percpu counter's compare and add are separate functions: without locking around them (which would defeat their purpose), it has been possible to overflow the intended limit. Imagine all the other CPUs fallocating tmpfs huge pages to the limit, in between this CPU's compare and its add. I have not seen reports of that happening; but tmpfs's recent addition of dquot_alloc_block_nodirty() in between the compare and the add makes it even more likely, and I'd be uncomfortable to leave it unfixed. Introduce percpu_counter_limited_add(fbc, limit, amount) to prevent it. I believe this implementation is correct, and slightly more efficient than the combination of compare and add (taking the lock once rather than twice when nearing full - the last 128MiB of a tmpfs volume on a machine with 128 CPUs and 4KiB pages); but it does beg for a better design - when nearing full, there is no new batching, but the costly percpu counter sum across CPUs still has to be done, while locked. Follow __percpu_counter_sum()'s example, including cpu_dying_mask as well as cpu_online_mask: but shouldn't __percpu_counter_compare() and __percpu_counter_limited_add() then be adding a num_dying_cpus() to num_online_cpus(), when they calculate the maximum which could be held across CPUs? But the times when it matters would be vanishingly rare. Link: https://lkml.kernel.org/r/bb817848-2d19-bcc8-39ca-ea179af0f0b4@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Carlos Maiolino <cem@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 3022fd7a Fri Sep 29 21:32:40 MDT 2023 Hugh Dickins <hughd@google.com> shmem: _add_to_page_cache() before shmem_inode_acct_blocks() There has been a recurring problem, that when a tmpfs volume is being filled by racing threads, some fail with ENOSPC (or consequent SIGBUS or EFAULT) even though all allocations were within the permitted size. This was a problem since early days, but magnified and complicated by the addition of huge pages. We have often worked around it by adding some slop to the tmpfs size, but it's hard to say how much is needed, and some users prefer not to do that e.g. keeping sparse files in a tightly tailored tmpfs helps to prevent accidental writing to holes. This comes from the allocation sequence: 1. check page cache for existing folio 2. check and reserve from vm_enough_memory 3. check and account from size of tmpfs 4. if huge, check page cache for overlapping folio 5. allocate physical folio, huge or small 6. check and charge from mem cgroup limit 7. add to page cache (but maybe another folio already got in). Concurrent tasks allocating at the same position could deplete the size allowance and fail. Doing vm_enough_memory and size checks before the folio allocation was intentional (to limit the load on the page allocator from this source) and still has some virtue; but memory cgroup never did that, so I think it's better reordered to favour predictable behaviour. 1. check page cache for existing folio 2. if huge, check page cache for overlapping folio 3. allocate physical folio, huge or small 4. check and charge from mem cgroup limit 5. add to page cache (but maybe another folio already got in) 6. check and reserve from vm_enough_memory 7. check and account from size of tmpfs. The folio lock held from allocation onwards ensures that the !uptodate folio cannot be used by others, and can safely be deleted from the cache if checks 6 or 7 subsequently fail (and those waiting on folio lock already check that the folio was not truncated once they get the lock); and the early addition to page cache ensures that racers find it before they try to duplicate the accounting. Seize the opportunity to tidy up shmem_get_folio_gfp()'s ENOSPC retrying, which can be combined inside the new shmem_alloc_and_add_folio(): doing 2 splits twice (once huge, once nonhuge) is not exactly equivalent to trying 5 splits (and giving up early on huge), but let's keep it simple unless more complication proves necessary. Userfaultfd is a foreign country: they do things differently there, and for good reason - to avoid mmap_lock deadlock. Leave ordering in shmem_mfill_atomic_pte() untouched for now, but I would rather like to mesh it better with shmem_get_folio_gfp() in the future. Link: https://lkml.kernel.org/r/22ddd06-d919-33b-1219-56335c1bf28e@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Carlos Maiolino <cem@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Tim Chen <tim.c.chen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 3022fd7a Fri Sep 29 21:32:40 MDT 2023 Hugh Dickins <hughd@google.com> shmem: _add_to_page_cache() before shmem_inode_acct_blocks() There has been a recurring problem, that when a tmpfs volume is being filled by racing threads, some fail with ENOSPC (or consequent SIGBUS or EFAULT) even though all allocations were within the permitted size. This was a problem since early days, but magnified and complicated by the addition of huge pages. We have often worked around it by adding some slop to the tmpfs size, but it's hard to say how much is needed, and some users prefer not to do that e.g. keeping sparse files in a tightly tailored tmpfs helps to prevent accidental writing to holes. This comes from the allocation sequence: 1. check page cache for existing folio 2. check and reserve from vm_enough_memory 3. check and account from size of tmpfs 4. if huge, check page cache for overlapping folio 5. allocate physical folio, huge or small 6. check and charge from mem cgroup limit 7. add to page cache (but maybe another folio already got in). Concurrent tasks allocating at the same position could deplete the size allowance and fail. Doing vm_enough_memory and size checks before the folio allocation was intentional (to limit the load on the page allocator from this source) and still has some virtue; but memory cgroup never did that, so I think it's better reordered to favour predictable behaviour. 1. check page cache for existing folio 2. if huge, check page cache for overlapping folio 3. allocate physical folio, huge or small 4. check and charge from mem cgroup limit 5. add to page cache (but maybe another folio already got in) 6. check and reserve from vm_enough_memory 7. check and account from size of tmpfs. The folio lock held from allocation onwards ensures that the !uptodate folio cannot be used by others, and can safely be deleted from the cache if checks 6 or 7 subsequently fail (and those waiting on folio lock already check that the folio was not truncated once they get the lock); and the early addition to page cache ensures that racers find it before they try to duplicate the accounting. Seize the opportunity to tidy up shmem_get_folio_gfp()'s ENOSPC retrying, which can be combined inside the new shmem_alloc_and_add_folio(): doing 2 splits twice (once huge, once nonhuge) is not exactly equivalent to trying 5 splits (and giving up early on huge), but let's keep it simple unless more complication proves necessary. Userfaultfd is a foreign country: they do things differently there, and for good reason - to avoid mmap_lock deadlock. Leave ordering in shmem_mfill_atomic_pte() untouched for now, but I would rather like to mesh it better with shmem_get_folio_gfp() in the future. Link: https://lkml.kernel.org/r/22ddd06-d919-33b-1219-56335c1bf28e@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Carlos Maiolino <cem@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Tim Chen <tim.c.chen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 3022fd7a Fri Sep 29 21:32:40 MDT 2023 Hugh Dickins <hughd@google.com> shmem: _add_to_page_cache() before shmem_inode_acct_blocks() There has been a recurring problem, that when a tmpfs volume is being filled by racing threads, some fail with ENOSPC (or consequent SIGBUS or EFAULT) even though all allocations were within the permitted size. This was a problem since early days, but magnified and complicated by the addition of huge pages. We have often worked around it by adding some slop to the tmpfs size, but it's hard to say how much is needed, and some users prefer not to do that e.g. keeping sparse files in a tightly tailored tmpfs helps to prevent accidental writing to holes. This comes from the allocation sequence: 1. check page cache for existing folio 2. check and reserve from vm_enough_memory 3. check and account from size of tmpfs 4. if huge, check page cache for overlapping folio 5. allocate physical folio, huge or small 6. check and charge from mem cgroup limit 7. add to page cache (but maybe another folio already got in). Concurrent tasks allocating at the same position could deplete the size allowance and fail. Doing vm_enough_memory and size checks before the folio allocation was intentional (to limit the load on the page allocator from this source) and still has some virtue; but memory cgroup never did that, so I think it's better reordered to favour predictable behaviour. 1. check page cache for existing folio 2. if huge, check page cache for overlapping folio 3. allocate physical folio, huge or small 4. check and charge from mem cgroup limit 5. add to page cache (but maybe another folio already got in) 6. check and reserve from vm_enough_memory 7. check and account from size of tmpfs. The folio lock held from allocation onwards ensures that the !uptodate folio cannot be used by others, and can safely be deleted from the cache if checks 6 or 7 subsequently fail (and those waiting on folio lock already check that the folio was not truncated once they get the lock); and the early addition to page cache ensures that racers find it before they try to duplicate the accounting. Seize the opportunity to tidy up shmem_get_folio_gfp()'s ENOSPC retrying, which can be combined inside the new shmem_alloc_and_add_folio(): doing 2 splits twice (once huge, once nonhuge) is not exactly equivalent to trying 5 splits (and giving up early on huge), but let's keep it simple unless more complication proves necessary. Userfaultfd is a foreign country: they do things differently there, and for good reason - to avoid mmap_lock deadlock. Leave ordering in shmem_mfill_atomic_pte() untouched for now, but I would rather like to mesh it better with shmem_get_folio_gfp() in the future. Link: https://lkml.kernel.org/r/22ddd06-d919-33b-1219-56335c1bf28e@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Carlos Maiolino <cem@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Tim Chen <tim.c.chen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 2f502860 Fri Sep 29 23:00:32 MDT 2023 Wedson Almeida Filho <walmeida@microsoft.com> shmem: move shmem_xattr_handlers to .rodata This makes it harder for accidental or malicious changes to shmem_xattr_handlers at runtime. Cc: Hugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20230930050033.41174-29-wedsonaf@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff af19487f Fri Jul 07 15:55:33 MDT 2023 Axel Rasmussen <axelrasmussen@google.com> mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 2daf18a7 Tue Aug 08 22:33:56 MDT 2023 Hugh Dickins <hughd@google.com> tmpfs,xattr: enable limited user extended attributes Enable "user." extended attributes on tmpfs, limiting them by tracking the space they occupy, and deducting that space from the limited ispace (unless tmpfs mounted with nr_inodes=0 to leave that ispace unlimited). tmpfs inodes and simple xattrs are both unswappable, and have to be in lowmem on a 32-bit highmem kernel: so the ispace limit is appropriate for xattrs, without any need for a further mount option. Add simple_xattr_space() to give approximate but deterministic estimate of the space taken up by each xattr: with simple_xattrs_free() outputting the space freed if required (but kernfs and even some tmpfs usages do not require that, so don't waste time on strlen'ing if not needed). Security and trusted xattrs were already supported: for consistency and simplicity, account them from the same pool; though there's a small risk that a tmpfs with enough space before would now be considered too small. When extended attributes are used, "df -i" does show more IUsed and less IFree than can be explained by the inodes: document that (manpage later). xfstests tests/generic which were not run on tmpfs before but now pass: 020 037 062 070 077 097 103 117 337 377 454 486 523 533 611 618 728 with no new failures. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Message-Id: <2e63b26e-df46-5baa-c7d6-f9a8dd3282c5@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 2daf18a7 Tue Aug 08 22:33:56 MDT 2023 Hugh Dickins <hughd@google.com> tmpfs,xattr: enable limited user extended attributes Enable "user." extended attributes on tmpfs, limiting them by tracking the space they occupy, and deducting that space from the limited ispace (unless tmpfs mounted with nr_inodes=0 to leave that ispace unlimited). tmpfs inodes and simple xattrs are both unswappable, and have to be in lowmem on a 32-bit highmem kernel: so the ispace limit is appropriate for xattrs, without any need for a further mount option. Add simple_xattr_space() to give approximate but deterministic estimate of the space taken up by each xattr: with simple_xattrs_free() outputting the space freed if required (but kernfs and even some tmpfs usages do not require that, so don't waste time on strlen'ing if not needed). Security and trusted xattrs were already supported: for consistency and simplicity, account them from the same pool; though there's a small risk that a tmpfs with enough space before would now be considered too small. When extended attributes are used, "df -i" does show more IUsed and less IFree than can be explained by the inodes: document that (manpage later). xfstests tests/generic which were not run on tmpfs before but now pass: 020 037 062 070 077 097 103 117 337 377 454 486 523 533 611 618 728 with no new failures. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Message-Id: <2e63b26e-df46-5baa-c7d6-f9a8dd3282c5@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5de75970 Tue Aug 08 22:30:59 MDT 2023 Hugh Dickins <hughd@google.com> xattr: simple_xattr_set() return old_xattr to be freed tmpfs wants to support limited user extended attributes, but kernfs (or cgroupfs, the only kernfs with KERNFS_ROOT_SUPPORT_USER_XATTR) already supports user extended attributes through simple xattrs: but limited by a policy (128KiB per inode) too liberal to be used on tmpfs. To allow a different limiting policy for tmpfs, without affecting the policy for kernfs, change simple_xattr_set() to return the replaced or removed xattr (if any), leaving the caller to update their accounting then free the xattr (by simple_xattr_free(), renamed from the static free_simple_xattr()). Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Message-Id: <158c6585-2aa7-d4aa-90ff-f7c3f8fe407c@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
/linux-master/fs/fuse/ | ||
H A D | dir.c | diff 2d09ab22 Fri Jan 05 08:21:27 MST 2024 Alexander Mikhalitsyn <alexander@mihalicyn.com> fuse: fix typo for fuse_permission comment Found by chance while working on support for idmapped mounts in fuse. Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 972f4c46 Wed Aug 09 16:45:05 MDT 2023 Miklos Szeredi <mszeredi@redhat.com> fuse: cache btime Not all inode attributes are supported by all filesystems, but for the basic stats (which are returned by stat(2) and friends) all of them will have some value, even if that doesn't reflect a real attribute of the file. Btime is different, in that filesystems are free to report or not report a value in statx. If the value is available, then STATX_BTIME bit is set in stx_mask. When caching the value of btime, remember the availability of the attribute as well as the value (if available). This is done by using the FUSE_I_BTIME bit in fuse_inode->state to indicate availability, while using fuse_inode->inval_mask & STATX_BTIME to indicate the state of the cache itself (i.e. set if cache is invalid, and cleared if cache is valid). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff d3045530 Wed Aug 09 16:45:05 MDT 2023 Miklos Szeredi <mszeredi@redhat.com> fuse: implement statx Allow querying btime. When btime is requested in mask, then FUSE_STATX request is sent. Otherwise keep using FUSE_GETATTR. The userspace interface for statx matches that of the statx(2) API. However there are limitations on how this interface is used: - returned basic stats and btime are used, stx_attributes, etc. are ignored - always query basic stats and btime, regardless of what was requested - requested sync type is ignored, the default is passed to the server - if server returns with some attributes missing from the result_mask, then no attributes will be cached - btime is not cached yet (next patch will fix that) For new inodes initialize fi->inval_mask to "all invalid", instead of "all valid" as previously. Also only clear basic stats from inval_mask when caching attributes. This will result in the caching logic not thinking that btime is cached. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 0d72b928 Mon Aug 07 13:38:33 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff facd6105 Thu Jan 19 16:55:04 MST 2023 Christian Brauner <brauner@kernel.org> fuse: fixes after adapting to new posix acl api This cycle we ported all filesystems to the new posix acl api. While looking at further simplifications in this area to remove the last remnants of the generic dummy posix acl handlers we realized that we regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use of posix acls. With the change to a dedicated posix acl api interacting with posix acls doesn't go through the old xattr codepaths anymore and instead only relies the get acl and set acl inode operations. Before this change fuse daemons that don't set FUSE_POSIX_ACL were able to get and set posix acl albeit with two caveats. First, that posix acls aren't cached. And second, that they aren't used for permission checking in the vfs. We regressed that use-case as we currently refuse to retrieve any posix acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons would see a change in behavior. We can restore the old behavior in multiple ways. We could change the new posix acl api and look for a dedicated xattr handler and if we find one prefer that over the dedicated posix acl api. That would break the consistency of the new posix acl api so we would very much prefer not to do that. We could introduce a new ACL_*_CACHE sentinel that would instruct the vfs permission checking codepath to not call into the filesystem and ignore acls. But a more straightforward fix for v6.2 is to do the same thing that Overlayfs does and give fuse a separate get acl method for permission checking. Overlayfs uses this to express different needs for vfs permission lookup and acl based retrieval via the regular system call path as well. Let fuse do the same for now. This way fuse can continue to refuse to retrieve posix acls for daemons that don't set FUSE_POSXI_ACL for permission checking while allowing a fuse server to retrieve it via the usual system calls. In the future, we could extend the get acl inode operation to not just pass a simple boolean to indicate rcu lookup but instead make it a flag argument. Then in addition to passing the information that this is an rcu lookup to the filesystem we could also introduce a flag that tells the filesystem that this is a request from the vfs to use these acls for permission checking. Then fuse could refuse the get acl request for permission checking when the daemon doesn't have FUSE_POSIX_ACL set in the same get acl method. This would also help Overlayfs and allow us to remove the second method for it as well. But since that change is more invasive as we need to update the get acl inode operation for multiple filesystems we should not do this as a fix for v6.2. Instead we will do this for the v6.3 merge window. Fwiw, since posix acls are now always correctly translated in the new posix acl api we could also allow them to be used for daemons without FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral change and again if dones should be done for v6.3. For now, let's just restore the original behavior. A nice side-effect of this change is that for fuse daemons with and without FUSE_POSIX_ACL the same code is used for posix acls in a backwards compatible way. This also means we can remove the legacy xattr handlers completely. We've also added comments to explain the expected behavior for daemons without FUSE_POSIX_ACL into the code. Fixes: 318e66856dde ("xattr: use posix acl api") Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> diff facd6105 Thu Jan 19 16:55:04 MST 2023 Christian Brauner <brauner@kernel.org> fuse: fixes after adapting to new posix acl api This cycle we ported all filesystems to the new posix acl api. While looking at further simplifications in this area to remove the last remnants of the generic dummy posix acl handlers we realized that we regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use of posix acls. With the change to a dedicated posix acl api interacting with posix acls doesn't go through the old xattr codepaths anymore and instead only relies the get acl and set acl inode operations. Before this change fuse daemons that don't set FUSE_POSIX_ACL were able to get and set posix acl albeit with two caveats. First, that posix acls aren't cached. And second, that they aren't used for permission checking in the vfs. We regressed that use-case as we currently refuse to retrieve any posix acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons would see a change in behavior. We can restore the old behavior in multiple ways. We could change the new posix acl api and look for a dedicated xattr handler and if we find one prefer that over the dedicated posix acl api. That would break the consistency of the new posix acl api so we would very much prefer not to do that. We could introduce a new ACL_*_CACHE sentinel that would instruct the vfs permission checking codepath to not call into the filesystem and ignore acls. But a more straightforward fix for v6.2 is to do the same thing that Overlayfs does and give fuse a separate get acl method for permission checking. Overlayfs uses this to express different needs for vfs permission lookup and acl based retrieval via the regular system call path as well. Let fuse do the same for now. This way fuse can continue to refuse to retrieve posix acls for daemons that don't set FUSE_POSXI_ACL for permission checking while allowing a fuse server to retrieve it via the usual system calls. In the future, we could extend the get acl inode operation to not just pass a simple boolean to indicate rcu lookup but instead make it a flag argument. Then in addition to passing the information that this is an rcu lookup to the filesystem we could also introduce a flag that tells the filesystem that this is a request from the vfs to use these acls for permission checking. Then fuse could refuse the get acl request for permission checking when the daemon doesn't have FUSE_POSIX_ACL set in the same get acl method. This would also help Overlayfs and allow us to remove the second method for it as well. But since that change is more invasive as we need to update the get acl inode operation for multiple filesystems we should not do this as a fix for v6.2. Instead we will do this for the v6.3 merge window. Fwiw, since posix acls are now always correctly translated in the new posix acl api we could also allow them to be used for daemons without FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral change and again if dones should be done for v6.3. For now, let's just restore the original behavior. A nice side-effect of this change is that for fuse daemons with and without FUSE_POSIX_ACL the same code is used for posix acls in a backwards compatible way. This also means we can remove the legacy xattr handlers completely. We've also added comments to explain the expected behavior for daemons without FUSE_POSIX_ACL into the code. Fixes: 318e66856dde ("xattr: use posix acl api") Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> diff 2fdbb8dd Fri Apr 22 07:48:53 MDT 2022 Miklos Szeredi <mszeredi@redhat.com> fuse: fix deadlock between atomic O_TRUNC and page invalidation fuse_finish_open() will be called with FUSE_NOWRITE set in case of atomic O_TRUNC open(), so commit 76224355db75 ("fuse: truncate pagecache on atomic_o_trunc") replaced invalidate_inode_pages2() by truncate_pagecache() in such a case to avoid the A-A deadlock. However, we found another A-B-B-A deadlock related to the case above, which will cause the xfstests generic/464 testcase hung in our virtio-fs test environment. For example, consider two processes concurrently open one same file, one with O_TRUNC and another without O_TRUNC. The deadlock case is described below, if open(O_TRUNC) is already set_nowrite(acquired A), and is trying to lock a page (acquiring B), open() could have held the page lock (acquired B), and waiting on the page writeback (acquiring A). This would lead to deadlocks. open(O_TRUNC) ---------------------------------------------------------------- fuse_open_common inode_lock [C acquire] fuse_set_nowrite [A acquire] fuse_finish_open truncate_pagecache lock_page [B acquire] truncate_inode_page unlock_page [B release] fuse_release_nowrite [A release] inode_unlock [C release] ---------------------------------------------------------------- open() ---------------------------------------------------------------- fuse_open_common fuse_finish_open invalidate_inode_pages2 lock_page [B acquire] fuse_launder_page fuse_wait_on_page_writeback [A acquire & release] unlock_page [B release] ---------------------------------------------------------------- Besides this case, all calls of invalidate_inode_pages2() and invalidate_inode_pages2_range() in fuse code also can deadlock with open(O_TRUNC). Fix by moving the truncate_pagecache() call outside the nowrite protected region. The nowrite protection is only for delayed writeback (writeback_cache) case, where inode lock does not protect against truncation racing with writes on the server. Write syscalls racing with page cache truncation still get the inode lock protection. This patch also changes the order of filemap_invalidate_lock() vs. fuse_set_nowrite() in fuse_open_common(). This new order matches the order found in fuse_file_fallocate() and fuse_do_setattr(). Reported-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com> Tested-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com> Fixes: e4648309b85a ("fuse: truncate pending writes on O_TRUNC") Cc: <stable@vger.kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 2bf06b8e Wed Feb 09 13:21:56 MST 2022 Matthew Wilcox (Oracle) <willy@infradead.org> fuse: Convert from launder_page to launder_folio Straightforward conversion although the helper functions still assume a single page. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs diff 5c791fe1 Fri Oct 22 09:03:01 MDT 2021 Miklos Szeredi <mszeredi@redhat.com> fuse: make sure reclaim doesn't write the inode In writeback cache mode mtime/ctime updates are cached, and flushed to the server using the ->write_inode() callback. Closing the file will result in a dirty inode being immediately written, but in other cases the inode can remain dirty after all references are dropped. This result in the inode being written back from reclaim, which can deadlock on a regular allocation while the request is being served. The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because serving a request involves unrelated userspace process(es). Instead do the same as for dirty pages: make sure the inode is written before the last reference is gone. - fallocate(2)/copy_file_range(2): these call file_update_time() or file_modified(), so flush the inode before returning from the call - unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so flush the ctime directly from this helper Reported-by: chenguanyou <chenguanyou@xiaomi.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 5c791fe1 Fri Oct 22 09:03:01 MDT 2021 Miklos Szeredi <mszeredi@redhat.com> fuse: make sure reclaim doesn't write the inode In writeback cache mode mtime/ctime updates are cached, and flushed to the server using the ->write_inode() callback. Closing the file will result in a dirty inode being immediately written, but in other cases the inode can remain dirty after all references are dropped. This result in the inode being written back from reclaim, which can deadlock on a regular allocation while the request is being served. The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because serving a request involves unrelated userspace process(es). Instead do the same as for dirty pages: make sure the inode is written before the last reference is gone. - fallocate(2)/copy_file_range(2): these call file_update_time() or file_modified(), so flush the inode before returning from the call - unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so flush the ctime directly from this helper Reported-by: chenguanyou <chenguanyou@xiaomi.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 5c791fe1 Fri Oct 22 09:03:01 MDT 2021 Miklos Szeredi <mszeredi@redhat.com> fuse: make sure reclaim doesn't write the inode In writeback cache mode mtime/ctime updates are cached, and flushed to the server using the ->write_inode() callback. Closing the file will result in a dirty inode being immediately written, but in other cases the inode can remain dirty after all references are dropped. This result in the inode being written back from reclaim, which can deadlock on a regular allocation while the request is being served. The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because serving a request involves unrelated userspace process(es). Instead do the same as for dirty pages: make sure the inode is written before the last reference is gone. - fallocate(2)/copy_file_range(2): these call file_update_time() or file_modified(), so flush the inode before returning from the call - unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so flush the ctime directly from this helper Reported-by: chenguanyou <chenguanyou@xiaomi.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 5c791fe1 Fri Oct 22 09:03:01 MDT 2021 Miklos Szeredi <mszeredi@redhat.com> fuse: make sure reclaim doesn't write the inode In writeback cache mode mtime/ctime updates are cached, and flushed to the server using the ->write_inode() callback. Closing the file will result in a dirty inode being immediately written, but in other cases the inode can remain dirty after all references are dropped. This result in the inode being written back from reclaim, which can deadlock on a regular allocation while the request is being served. The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because serving a request involves unrelated userspace process(es). Instead do the same as for dirty pages: make sure the inode is written before the last reference is gone. - fallocate(2)/copy_file_range(2): these call file_update_time() or file_modified(), so flush the inode before returning from the call - unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so flush the ctime directly from this helper Reported-by: chenguanyou <chenguanyou@xiaomi.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 5c791fe1 Fri Oct 22 09:03:01 MDT 2021 Miklos Szeredi <mszeredi@redhat.com> fuse: make sure reclaim doesn't write the inode In writeback cache mode mtime/ctime updates are cached, and flushed to the server using the ->write_inode() callback. Closing the file will result in a dirty inode being immediately written, but in other cases the inode can remain dirty after all references are dropped. This result in the inode being written back from reclaim, which can deadlock on a regular allocation while the request is being served. The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because serving a request involves unrelated userspace process(es). Instead do the same as for dirty pages: make sure the inode is written before the last reference is gone. - fallocate(2)/copy_file_range(2): these call file_update_time() or file_modified(), so flush the inode before returning from the call - unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so flush the ctime directly from this helper Reported-by: chenguanyou <chenguanyou@xiaomi.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
/linux-master/fs/zonefs/ | ||
H A D | super.c | diff 14db5f64 Thu Feb 08 01:26:59 MST 2024 Damien Le Moal <dlemoal@kernel.org> zonefs: Improve error handling Write error handling is racy and can sometime lead to the error recovery path wrongly changing the inode size of a sequential zone file to an incorrect value which results in garbage data being readable at the end of a file. There are 2 problems: 1) zonefs_file_dio_write() updates a zone file write pointer offset after issuing a direct IO with iomap_dio_rw(). This update is done only if the IO succeed for synchronous direct writes. However, for asynchronous direct writes, the update is done without waiting for the IO completion so that the next asynchronous IO can be immediately issued. However, if an asynchronous IO completes with a failure right before the i_truncate_mutex lock protecting the update, the update may change the value of the inode write pointer offset that was corrected by the error path (zonefs_io_error() function). 2) zonefs_io_error() is called when a read or write error occurs. This function executes a report zone operation using the callback function zonefs_io_error_cb(), which does all the error recovery handling based on the current zone condition, write pointer position and according to the mount options being used. However, depending on the zoned device being used, a report zone callback may be executed in a context that is different from the context of __zonefs_io_error(). As a result, zonefs_io_error_cb() may be executed without the inode truncate mutex lock held, which can lead to invalid error processing. Fix both problems as follows: - Problem 1: Perform the inode write pointer offset update before a direct write is issued with iomap_dio_rw(). This is safe to do as partial direct writes are not supported (IOMAP_DIO_PARTIAL is not set) and any failed IO will trigger the execution of zonefs_io_error() which will correct the inode write pointer offset to reflect the current state of the one on the device. - Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error() and call this function directly from __zonefs_io_error() after obtaining the zone information using blkdev_report_zones() with a simple callback function that copies to a local stack variable the struct blk_zone obtained from the device. This ensures that error handling is performed holding the inode truncate mutex. This change also simplifies error handling for conventional zone files by bypassing the execution of report zones entirely. This is safe to do because the condition of conventional zones cannot be read-only or offline and conventional zone files are always fully mapped with a constant file size. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> diff 14db5f64 Thu Feb 08 01:26:59 MST 2024 Damien Le Moal <dlemoal@kernel.org> zonefs: Improve error handling Write error handling is racy and can sometime lead to the error recovery path wrongly changing the inode size of a sequential zone file to an incorrect value which results in garbage data being readable at the end of a file. There are 2 problems: 1) zonefs_file_dio_write() updates a zone file write pointer offset after issuing a direct IO with iomap_dio_rw(). This update is done only if the IO succeed for synchronous direct writes. However, for asynchronous direct writes, the update is done without waiting for the IO completion so that the next asynchronous IO can be immediately issued. However, if an asynchronous IO completes with a failure right before the i_truncate_mutex lock protecting the update, the update may change the value of the inode write pointer offset that was corrected by the error path (zonefs_io_error() function). 2) zonefs_io_error() is called when a read or write error occurs. This function executes a report zone operation using the callback function zonefs_io_error_cb(), which does all the error recovery handling based on the current zone condition, write pointer position and according to the mount options being used. However, depending on the zoned device being used, a report zone callback may be executed in a context that is different from the context of __zonefs_io_error(). As a result, zonefs_io_error_cb() may be executed without the inode truncate mutex lock held, which can lead to invalid error processing. Fix both problems as follows: - Problem 1: Perform the inode write pointer offset update before a direct write is issued with iomap_dio_rw(). This is safe to do as partial direct writes are not supported (IOMAP_DIO_PARTIAL is not set) and any failed IO will trigger the execution of zonefs_io_error() which will correct the inode write pointer offset to reflect the current state of the one on the device. - Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error() and call this function directly from __zonefs_io_error() after obtaining the zone information using blkdev_report_zones() with a simple callback function that copies to a local stack variable the struct blk_zone obtained from the device. This ensures that error handling is performed holding the inode truncate mutex. This change also simplifies error handling for conventional zone files by bypassing the execution of report zones entirely. This is safe to do because the condition of conventional zones cannot be read-only or offline and conventional zone files are always fully mapped with a constant file size. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> diff 14db5f64 Thu Feb 08 01:26:59 MST 2024 Damien Le Moal <dlemoal@kernel.org> zonefs: Improve error handling Write error handling is racy and can sometime lead to the error recovery path wrongly changing the inode size of a sequential zone file to an incorrect value which results in garbage data being readable at the end of a file. There are 2 problems: 1) zonefs_file_dio_write() updates a zone file write pointer offset after issuing a direct IO with iomap_dio_rw(). This update is done only if the IO succeed for synchronous direct writes. However, for asynchronous direct writes, the update is done without waiting for the IO completion so that the next asynchronous IO can be immediately issued. However, if an asynchronous IO completes with a failure right before the i_truncate_mutex lock protecting the update, the update may change the value of the inode write pointer offset that was corrected by the error path (zonefs_io_error() function). 2) zonefs_io_error() is called when a read or write error occurs. This function executes a report zone operation using the callback function zonefs_io_error_cb(), which does all the error recovery handling based on the current zone condition, write pointer position and according to the mount options being used. However, depending on the zoned device being used, a report zone callback may be executed in a context that is different from the context of __zonefs_io_error(). As a result, zonefs_io_error_cb() may be executed without the inode truncate mutex lock held, which can lead to invalid error processing. Fix both problems as follows: - Problem 1: Perform the inode write pointer offset update before a direct write is issued with iomap_dio_rw(). This is safe to do as partial direct writes are not supported (IOMAP_DIO_PARTIAL is not set) and any failed IO will trigger the execution of zonefs_io_error() which will correct the inode write pointer offset to reflect the current state of the one on the device. - Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error() and call this function directly from __zonefs_io_error() after obtaining the zone information using blkdev_report_zones() with a simple callback function that copies to a local stack variable the struct blk_zone obtained from the device. This ensures that error handling is performed holding the inode truncate mutex. This change also simplifies error handling for conventional zone files by bypassing the execution of report zones entirely. This is safe to do because the condition of conventional zones cannot be read-only or offline and conventional zone files are always fully mapped with a constant file size. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> diff 4e458869 Sun Nov 20 03:57:59 MST 2022 Zhang Xiaoxu <zhangxiaoxu5@huawei.com> zonefs: Fix race between modprobe and mount There is a race between modprobe and mount as below: modprobe zonefs | mount -t zonefs --------------------------------|------------------------- zonefs_init | register_filesystem [1] | | zonefs_fill_super [2] zonefs_sysfs_init [3] | 1. register zonefs suceess, then 2. user can mount the zonefs 3. if sysfs initialize failed, the module initialize failed. Then the mount process maybe some error happened since the module initialize failed. Let's register zonefs after all dependency resource ready. And reorder the dependency resource release in module exit. Fixes: 9277a6d4fbd4 ("zonefs: Export open zone resource information through sysfs") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> diff 4e458869 Sun Nov 20 03:57:59 MST 2022 Zhang Xiaoxu <zhangxiaoxu5@huawei.com> zonefs: Fix race between modprobe and mount There is a race between modprobe and mount as below: modprobe zonefs | mount -t zonefs --------------------------------|------------------------- zonefs_init | register_filesystem [1] | | zonefs_fill_super [2] zonefs_sysfs_init [3] | 1. register zonefs suceess, then 2. user can mount the zonefs 3. if sysfs initialize failed, the module initialize failed. Then the mount process maybe some error happened since the module initialize failed. Let's register zonefs after all dependency resource ready. And reorder the dependency resource release in module exit. Fixes: 9277a6d4fbd4 ("zonefs: Export open zone resource information through sysfs") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> diff 2ec810d5 Sun Jun 05 22:55:08 MDT 2022 Matthew Wilcox (Oracle) <willy@infradead.org> mm/migrate: Add filemap_migrate_folio() There is nothing iomap-specific about iomap_migratepage(), and it fits a pattern used by several other filesystems, so move it to mm/migrate.c, convert it to be filemap_migrate_folio() and convert the iomap filesystems to use it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> diff ff07a02e Thu Jul 14 12:06:27 MDT 2022 Bart Van Assche <bvanassche@acm.org> treewide: Rename enum req_opf into enum req_op The type name enum req_opf is misleading since it suggests that values of this type include both an operation type and flags. Since values of this type represent an operation only, change the type name into enum req_op. Convert the enum req_op documentation into kernel-doc format. Move a few definitions such that the enum req_op documentation occurs just above the enum req_op definition. The name "req_opf" was introduced by commit ef295ecf090d ("block: better op and flags encoding"). Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> diff 2b95a23c Tue Apr 12 02:00:13 MDT 2022 Damien Le Moal <damien.lemoal@opensource.wdc.com> zonefs: Rename super block information fields The s_open_zones field of struct zonefs_sb_info is used to count the number of files that are open for writing and may not necessarilly correspond to the number of open zones on the device. For instance, an application may open for writing a sequential zone file, fully write it and keep the file open. In such case, the zone of the file is not open anymore (it is in the full state). Avoid confusion about this counter meaning by renaming it to s_wro_seq_files. To keep things consistent, the field s_max_open_zones is renamed to s_max_wro_seq_files. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> diff 2aba0d19 Thu Apr 14 22:52:46 MDT 2022 Christoph Hellwig <hch@lst.de> block: add a bdev_max_zone_append_sectors helper Add a helper to check the max supported sectors for zone append based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> diff c75e707f Fri Mar 04 10:55:56 MST 2022 Christoph Hellwig <hch@lst.de> block: remove the per-bio/request write hint With the NVMe support for this gone, there are no consumers of these hints left, so remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220304175556.407719-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
/linux-master/include/linux/ | ||
H A D | fs.h | diff 2824083d Tue Feb 20 22:14:03 MST 2024 Gabriel Krisman Bertazi <krisman@suse.de> ovl: Always reject mounting over case-insensitive directories overlayfs relies on the filesystem setting DCACHE_OP_HASH or DCACHE_OP_COMPARE to reject mounting over case-insensitive directories. Since commit bb9cd9106b22 ("fscrypt: Have filesystems handle their d_ops"), we set ->d_op through a hook in ->d_lookup, which means the root dentry won't have them, causing the mount to accidentally succeed. In v6.7-rc7, the following sequence will succeed to mount, but any dentry other than the root dentry will be a "weird" dentry to ovl and fail with EREMOTE. mkfs.ext4 -O casefold lower.img mount -O loop lower.img lower mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work ovl /mnt Mounting on a subdirectory fails, as expected, because DCACHE_OP_HASH and DCACHE_OP_COMPARE are properly set by ->lookup. Fix by explicitly rejecting superblocks that allow case-insensitive dentries. Yes, this will be solved when we move d_op configuration back to ->s_d_op. Yet, we better have an explicit fix to avoid messing up again. While there, re-sort the entries to have more descriptive error messages first. Fixes: bb9cd9106b22 ("fscrypt: Have filesystems handle their d_ops") Acked-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20240221171412.10710-2-krisman@suse.de Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> diff a4af51ce Tue Feb 06 19:56:15 MST 2024 Kent Overstreet <kent.overstreet@linux.dev> fs: super_set_uuid() Some weird old filesytems have UUID-like things that we wish to expose as UUIDs, but are smaller; add a length field so that the new FS_IOC_(GET|SET)UUID ioctls can handle them in generic code. And add a helper super_set_uuid(), for setting nonstandard length uuids. Helper is now required for the new FS_IOC_GETUUID ioctl; if super_set_uuid() hasn't been called, the ioctl won't be supported. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20240207025624.1019754-2-kent.overstreet@linux.dev Signed-off-by: Christian Brauner <brauner@kernel.org> diff 3058fca1 Fri Feb 02 04:01:31 MST 2024 Amir Goldstein <amir73il@gmail.com> fs: make file_dentry() a simple accessor file_dentry() is a relic from the days that overlayfs was using files with a "fake" path, meaning, f_path on overlayfs and f_inode on underlying fs. In those days, file_dentry() was needed to get the underlying fs dentry that matches f_inode. Files with "fake" path should not exist nowadays, so make file_dentry() a simple accessor and use an assertion to make sure that file_dentry() was not papering over filesystem bugs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20240202110132.1584111-2-amir73il@gmail.com Tested-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff d3b1a9a7 Fri Feb 02 01:33:04 MST 2024 JonasZhou <JonasZhou@zhaoxin.com> fs/address_space: move i_mmap_rwsem to mitigate a false sharing with i_mmap. In the struct address_space, there is a 32-byte gap between i_mmap and i_mmap_rwsem. Due to the alignment of struct address_space variables to 8 bytes, in certain situations, i_mmap and i_mmap_rwsem may end up in the same CACHE line. While running Unixbench/execl, we observe high false sharing issues when accessing i_mmap against i_mmap_rwsem. We move i_mmap_rwsem after i_private_list, ensuring a 64-byte gap between i_mmap and i_mmap_rwsem. For Intel Silver machines (2 sockets) using kernel v6.8 rc-2, the score of Unixbench/execl improves by ~3.94%, and the score of Unixbench/shell improves by ~3.26%. Baseline: ------------------------------------------------------------- 162 546 748 11374 21 0xffff92e266af90c0 ------------------------------------------------------------- 46.89% 44.65% 0.00% 0.00% 0x0 1 1 0xffffffff86d5fb96 460 258 271 1069 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 4.21% 4.41% 0.00% 0.00% 0x4 1 1 0xffffffff86d0ed54 473 311 288 95 28 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 0.04% 4.76% 0x8 1 1 0xffffffff86d4bcf1 0 0 0 5 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 6.41% 6.02% 0.00% 0.00% 0x8 1 1 0xffffffff86d4ba85 411 271 339 210 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 0.47% 95.24% 0x10 1 1 0xffffffff86d4bd34 0 0 0 74 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 0.37% 0.13% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4f 328 212 380 7 5 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 5.13% 5.08% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4b 416 255 357 197 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 1.10% 0.53% 0.00% 0.00% 0x28 1 1 0xffffffff86e06eb8 395 228 351 24 14 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 1.10% 2.14% 57.07% 0.00% 0x38 1 1 0xffffffff878c9225 1364 792 462 7003 32 [k] down_write [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.00% 0.01% 0.00% 0x38 1 1 0xffffffff878c8e75 0 0 252 3 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.13% 0.00% 0.00% 0x38 1 1 0xffffffff878c8e23 0 596 63 2 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 2.38% 2.94% 6.53% 0.00% 0x38 1 1 0xffffffff878c8ccb 1150 818 570 1197 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 30.59% 32.22% 0.00% 0.00% 0x38 1 1 0xffffffff878c8cb4 423 251 380 648 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 1.83% 1.74% 35.88% 0.00% 0x38 1 1 0xffffffff86b4f833 1217 1112 565 4586 32 [k] up_write [kernel.vmlinux] atomic64_64.h:91 0 1 with this change: ------------------------------------------------------------- 360 12 300 57 35 0xffff982cdae76400 ------------------------------------------------------------- 50.00% 59.67% 0.00% 0.00% 0x0 1 1 0xffffffff8215fb86 352 200 191 558 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 8.33% 5.00% 0.00% 0.00% 0x4 1 1 0xffffffff8210ed44 370 284 263 42 24 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 5.26% 2.86% 0x8 1 1 0xffffffff8214bce1 0 0 0 4 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 33.33% 14.33% 0.00% 0.00% 0x8 1 1 0xffffffff8214ba75 344 186 219 140 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 94.74% 97.14% 0x10 1 1 0xffffffff8214bd24 0 0 0 88 29 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 8.33% 20.00% 0.00% 0.00% 0x10 1 1 0xffffffff8214bb3b 296 209 226 167 31 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 0.00% 0.67% 0.00% 0.00% 0x28 1 1 0xffffffff82206f45 0 140 334 4 3 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 0.00% 0.33% 0.00% 0.00% 0x38 1 1 0xffffffff8250a6c4 0 286 126 5 5 [k] errseq_sample [kernel.vmlinux] errseq.c:125 0 Signed-off-by: JonasZhou <JonasZhou@zhaoxin.com> Link: https://lore.kernel.org/r/20240202083304.10995-1-JonasZhou-oc@zhaoxin.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff d3b1a9a7 Fri Feb 02 01:33:04 MST 2024 JonasZhou <JonasZhou@zhaoxin.com> fs/address_space: move i_mmap_rwsem to mitigate a false sharing with i_mmap. In the struct address_space, there is a 32-byte gap between i_mmap and i_mmap_rwsem. Due to the alignment of struct address_space variables to 8 bytes, in certain situations, i_mmap and i_mmap_rwsem may end up in the same CACHE line. While running Unixbench/execl, we observe high false sharing issues when accessing i_mmap against i_mmap_rwsem. We move i_mmap_rwsem after i_private_list, ensuring a 64-byte gap between i_mmap and i_mmap_rwsem. For Intel Silver machines (2 sockets) using kernel v6.8 rc-2, the score of Unixbench/execl improves by ~3.94%, and the score of Unixbench/shell improves by ~3.26%. Baseline: ------------------------------------------------------------- 162 546 748 11374 21 0xffff92e266af90c0 ------------------------------------------------------------- 46.89% 44.65% 0.00% 0.00% 0x0 1 1 0xffffffff86d5fb96 460 258 271 1069 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 4.21% 4.41% 0.00% 0.00% 0x4 1 1 0xffffffff86d0ed54 473 311 288 95 28 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 0.04% 4.76% 0x8 1 1 0xffffffff86d4bcf1 0 0 0 5 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 6.41% 6.02% 0.00% 0.00% 0x8 1 1 0xffffffff86d4ba85 411 271 339 210 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 0.47% 95.24% 0x10 1 1 0xffffffff86d4bd34 0 0 0 74 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 0.37% 0.13% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4f 328 212 380 7 5 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 5.13% 5.08% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4b 416 255 357 197 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 1.10% 0.53% 0.00% 0.00% 0x28 1 1 0xffffffff86e06eb8 395 228 351 24 14 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 1.10% 2.14% 57.07% 0.00% 0x38 1 1 0xffffffff878c9225 1364 792 462 7003 32 [k] down_write [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.00% 0.01% 0.00% 0x38 1 1 0xffffffff878c8e75 0 0 252 3 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.13% 0.00% 0.00% 0x38 1 1 0xffffffff878c8e23 0 596 63 2 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 2.38% 2.94% 6.53% 0.00% 0x38 1 1 0xffffffff878c8ccb 1150 818 570 1197 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 30.59% 32.22% 0.00% 0.00% 0x38 1 1 0xffffffff878c8cb4 423 251 380 648 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 1.83% 1.74% 35.88% 0.00% 0x38 1 1 0xffffffff86b4f833 1217 1112 565 4586 32 [k] up_write [kernel.vmlinux] atomic64_64.h:91 0 1 with this change: ------------------------------------------------------------- 360 12 300 57 35 0xffff982cdae76400 ------------------------------------------------------------- 50.00% 59.67% 0.00% 0.00% 0x0 1 1 0xffffffff8215fb86 352 200 191 558 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 8.33% 5.00% 0.00% 0.00% 0x4 1 1 0xffffffff8210ed44 370 284 263 42 24 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 5.26% 2.86% 0x8 1 1 0xffffffff8214bce1 0 0 0 4 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 33.33% 14.33% 0.00% 0.00% 0x8 1 1 0xffffffff8214ba75 344 186 219 140 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 94.74% 97.14% 0x10 1 1 0xffffffff8214bd24 0 0 0 88 29 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 8.33% 20.00% 0.00% 0.00% 0x10 1 1 0xffffffff8214bb3b 296 209 226 167 31 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 0.00% 0.67% 0.00% 0.00% 0x28 1 1 0xffffffff82206f45 0 140 334 4 3 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 0.00% 0.33% 0.00% 0.00% 0x38 1 1 0xffffffff8250a6c4 0 286 126 5 5 [k] errseq_sample [kernel.vmlinux] errseq.c:125 0 Signed-off-by: JonasZhou <JonasZhou@zhaoxin.com> Link: https://lore.kernel.org/r/20240202083304.10995-1-JonasZhou-oc@zhaoxin.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff d3b1a9a7 Fri Feb 02 01:33:04 MST 2024 JonasZhou <JonasZhou@zhaoxin.com> fs/address_space: move i_mmap_rwsem to mitigate a false sharing with i_mmap. In the struct address_space, there is a 32-byte gap between i_mmap and i_mmap_rwsem. Due to the alignment of struct address_space variables to 8 bytes, in certain situations, i_mmap and i_mmap_rwsem may end up in the same CACHE line. While running Unixbench/execl, we observe high false sharing issues when accessing i_mmap against i_mmap_rwsem. We move i_mmap_rwsem after i_private_list, ensuring a 64-byte gap between i_mmap and i_mmap_rwsem. For Intel Silver machines (2 sockets) using kernel v6.8 rc-2, the score of Unixbench/execl improves by ~3.94%, and the score of Unixbench/shell improves by ~3.26%. Baseline: ------------------------------------------------------------- 162 546 748 11374 21 0xffff92e266af90c0 ------------------------------------------------------------- 46.89% 44.65% 0.00% 0.00% 0x0 1 1 0xffffffff86d5fb96 460 258 271 1069 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 4.21% 4.41% 0.00% 0.00% 0x4 1 1 0xffffffff86d0ed54 473 311 288 95 28 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 0.04% 4.76% 0x8 1 1 0xffffffff86d4bcf1 0 0 0 5 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 6.41% 6.02% 0.00% 0.00% 0x8 1 1 0xffffffff86d4ba85 411 271 339 210 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 0.47% 95.24% 0x10 1 1 0xffffffff86d4bd34 0 0 0 74 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 0.37% 0.13% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4f 328 212 380 7 5 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 5.13% 5.08% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4b 416 255 357 197 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 1.10% 0.53% 0.00% 0.00% 0x28 1 1 0xffffffff86e06eb8 395 228 351 24 14 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 1.10% 2.14% 57.07% 0.00% 0x38 1 1 0xffffffff878c9225 1364 792 462 7003 32 [k] down_write [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.00% 0.01% 0.00% 0x38 1 1 0xffffffff878c8e75 0 0 252 3 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.13% 0.00% 0.00% 0x38 1 1 0xffffffff878c8e23 0 596 63 2 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 2.38% 2.94% 6.53% 0.00% 0x38 1 1 0xffffffff878c8ccb 1150 818 570 1197 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 30.59% 32.22% 0.00% 0.00% 0x38 1 1 0xffffffff878c8cb4 423 251 380 648 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 1.83% 1.74% 35.88% 0.00% 0x38 1 1 0xffffffff86b4f833 1217 1112 565 4586 32 [k] up_write [kernel.vmlinux] atomic64_64.h:91 0 1 with this change: ------------------------------------------------------------- 360 12 300 57 35 0xffff982cdae76400 ------------------------------------------------------------- 50.00% 59.67% 0.00% 0.00% 0x0 1 1 0xffffffff8215fb86 352 200 191 558 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 8.33% 5.00% 0.00% 0.00% 0x4 1 1 0xffffffff8210ed44 370 284 263 42 24 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 5.26% 2.86% 0x8 1 1 0xffffffff8214bce1 0 0 0 4 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 33.33% 14.33% 0.00% 0.00% 0x8 1 1 0xffffffff8214ba75 344 186 219 140 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 94.74% 97.14% 0x10 1 1 0xffffffff8214bd24 0 0 0 88 29 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 8.33% 20.00% 0.00% 0.00% 0x10 1 1 0xffffffff8214bb3b 296 209 226 167 31 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 0.00% 0.67% 0.00% 0.00% 0x28 1 1 0xffffffff82206f45 0 140 334 4 3 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 0.00% 0.33% 0.00% 0.00% 0x38 1 1 0xffffffff8250a6c4 0 286 126 5 5 [k] errseq_sample [kernel.vmlinux] errseq.c:125 0 Signed-off-by: JonasZhou <JonasZhou@zhaoxin.com> Link: https://lore.kernel.org/r/20240202083304.10995-1-JonasZhou-oc@zhaoxin.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff d3b1a9a7 Fri Feb 02 01:33:04 MST 2024 JonasZhou <JonasZhou@zhaoxin.com> fs/address_space: move i_mmap_rwsem to mitigate a false sharing with i_mmap. In the struct address_space, there is a 32-byte gap between i_mmap and i_mmap_rwsem. Due to the alignment of struct address_space variables to 8 bytes, in certain situations, i_mmap and i_mmap_rwsem may end up in the same CACHE line. While running Unixbench/execl, we observe high false sharing issues when accessing i_mmap against i_mmap_rwsem. We move i_mmap_rwsem after i_private_list, ensuring a 64-byte gap between i_mmap and i_mmap_rwsem. For Intel Silver machines (2 sockets) using kernel v6.8 rc-2, the score of Unixbench/execl improves by ~3.94%, and the score of Unixbench/shell improves by ~3.26%. Baseline: ------------------------------------------------------------- 162 546 748 11374 21 0xffff92e266af90c0 ------------------------------------------------------------- 46.89% 44.65% 0.00% 0.00% 0x0 1 1 0xffffffff86d5fb96 460 258 271 1069 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 4.21% 4.41% 0.00% 0.00% 0x4 1 1 0xffffffff86d0ed54 473 311 288 95 28 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 0.04% 4.76% 0x8 1 1 0xffffffff86d4bcf1 0 0 0 5 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 6.41% 6.02% 0.00% 0.00% 0x8 1 1 0xffffffff86d4ba85 411 271 339 210 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 0.47% 95.24% 0x10 1 1 0xffffffff86d4bd34 0 0 0 74 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 0.37% 0.13% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4f 328 212 380 7 5 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 5.13% 5.08% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4b 416 255 357 197 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 1.10% 0.53% 0.00% 0.00% 0x28 1 1 0xffffffff86e06eb8 395 228 351 24 14 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 1.10% 2.14% 57.07% 0.00% 0x38 1 1 0xffffffff878c9225 1364 792 462 7003 32 [k] down_write [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.00% 0.01% 0.00% 0x38 1 1 0xffffffff878c8e75 0 0 252 3 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.13% 0.00% 0.00% 0x38 1 1 0xffffffff878c8e23 0 596 63 2 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 2.38% 2.94% 6.53% 0.00% 0x38 1 1 0xffffffff878c8ccb 1150 818 570 1197 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 30.59% 32.22% 0.00% 0.00% 0x38 1 1 0xffffffff878c8cb4 423 251 380 648 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 1.83% 1.74% 35.88% 0.00% 0x38 1 1 0xffffffff86b4f833 1217 1112 565 4586 32 [k] up_write [kernel.vmlinux] atomic64_64.h:91 0 1 with this change: ------------------------------------------------------------- 360 12 300 57 35 0xffff982cdae76400 ------------------------------------------------------------- 50.00% 59.67% 0.00% 0.00% 0x0 1 1 0xffffffff8215fb86 352 200 191 558 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 8.33% 5.00% 0.00% 0.00% 0x4 1 1 0xffffffff8210ed44 370 284 263 42 24 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 5.26% 2.86% 0x8 1 1 0xffffffff8214bce1 0 0 0 4 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 33.33% 14.33% 0.00% 0.00% 0x8 1 1 0xffffffff8214ba75 344 186 219 140 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 94.74% 97.14% 0x10 1 1 0xffffffff8214bd24 0 0 0 88 29 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 8.33% 20.00% 0.00% 0.00% 0x10 1 1 0xffffffff8214bb3b 296 209 226 167 31 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 0.00% 0.67% 0.00% 0.00% 0x28 1 1 0xffffffff82206f45 0 140 334 4 3 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 0.00% 0.33% 0.00% 0.00% 0x38 1 1 0xffffffff8250a6c4 0 286 126 5 5 [k] errseq_sample [kernel.vmlinux] errseq.c:125 0 Signed-off-by: JonasZhou <JonasZhou@zhaoxin.com> Link: https://lore.kernel.org/r/20240202083304.10995-1-JonasZhou-oc@zhaoxin.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff d3b1a9a7 Fri Feb 02 01:33:04 MST 2024 JonasZhou <JonasZhou@zhaoxin.com> fs/address_space: move i_mmap_rwsem to mitigate a false sharing with i_mmap. In the struct address_space, there is a 32-byte gap between i_mmap and i_mmap_rwsem. Due to the alignment of struct address_space variables to 8 bytes, in certain situations, i_mmap and i_mmap_rwsem may end up in the same CACHE line. While running Unixbench/execl, we observe high false sharing issues when accessing i_mmap against i_mmap_rwsem. We move i_mmap_rwsem after i_private_list, ensuring a 64-byte gap between i_mmap and i_mmap_rwsem. For Intel Silver machines (2 sockets) using kernel v6.8 rc-2, the score of Unixbench/execl improves by ~3.94%, and the score of Unixbench/shell improves by ~3.26%. Baseline: ------------------------------------------------------------- 162 546 748 11374 21 0xffff92e266af90c0 ------------------------------------------------------------- 46.89% 44.65% 0.00% 0.00% 0x0 1 1 0xffffffff86d5fb96 460 258 271 1069 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 4.21% 4.41% 0.00% 0.00% 0x4 1 1 0xffffffff86d0ed54 473 311 288 95 28 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 0.04% 4.76% 0x8 1 1 0xffffffff86d4bcf1 0 0 0 5 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 6.41% 6.02% 0.00% 0.00% 0x8 1 1 0xffffffff86d4ba85 411 271 339 210 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 0.47% 95.24% 0x10 1 1 0xffffffff86d4bd34 0 0 0 74 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 0.37% 0.13% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4f 328 212 380 7 5 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 5.13% 5.08% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4b 416 255 357 197 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 1.10% 0.53% 0.00% 0.00% 0x28 1 1 0xffffffff86e06eb8 395 228 351 24 14 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 1.10% 2.14% 57.07% 0.00% 0x38 1 1 0xffffffff878c9225 1364 792 462 7003 32 [k] down_write [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.00% 0.01% 0.00% 0x38 1 1 0xffffffff878c8e75 0 0 252 3 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 0.00% 0.13% 0.00% 0.00% 0x38 1 1 0xffffffff878c8e23 0 596 63 2 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 2.38% 2.94% 6.53% 0.00% 0x38 1 1 0xffffffff878c8ccb 1150 818 570 1197 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1 30.59% 32.22% 0.00% 0.00% 0x38 1 1 0xffffffff878c8cb4 423 251 380 648 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1 1.83% 1.74% 35.88% 0.00% 0x38 1 1 0xffffffff86b4f833 1217 1112 565 4586 32 [k] up_write [kernel.vmlinux] atomic64_64.h:91 0 1 with this change: ------------------------------------------------------------- 360 12 300 57 35 0xffff982cdae76400 ------------------------------------------------------------- 50.00% 59.67% 0.00% 0.00% 0x0 1 1 0xffffffff8215fb86 352 200 191 558 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1 8.33% 5.00% 0.00% 0.00% 0x4 1 1 0xffffffff8210ed44 370 284 263 42 24 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1 0.00% 0.00% 5.26% 2.86% 0x8 1 1 0xffffffff8214bce1 0 0 0 4 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1 33.33% 14.33% 0.00% 0.00% 0x8 1 1 0xffffffff8214ba75 344 186 219 140 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1 0.00% 0.00% 94.74% 97.14% 0x10 1 1 0xffffffff8214bd24 0 0 0 88 29 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1 8.33% 20.00% 0.00% 0.00% 0x10 1 1 0xffffffff8214bb3b 296 209 226 167 31 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1 0.00% 0.67% 0.00% 0.00% 0x28 1 1 0xffffffff82206f45 0 140 334 4 3 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1 0.00% 0.33% 0.00% 0.00% 0x38 1 1 0xffffffff8250a6c4 0 286 126 5 5 [k] errseq_sample [kernel.vmlinux] errseq.c:125 0 Signed-off-by: JonasZhou <JonasZhou@zhaoxin.com> Link: https://lore.kernel.org/r/20240202083304.10995-1-JonasZhou-oc@zhaoxin.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff d8f899d1 Wed Jan 24 07:28:55 MST 2024 Baokun Li <libaokun1@huawei.com> fs: make the i_size_read/write helpers be smp_load_acquire/store_release() In [Link] Linus mentions that acquire/release makes it clear which _particular_ memory accesses are the ordered ones, and it's unlikely to make any performance difference, so it's much better to pair up the release->acquire ordering than have a "wmb->rmb" ordering. ========================================================= update pagecache folio_mark_uptodate(folio) smp_wmb() set_bit PG_uptodate === ↑↑↑ STLR ↑↑↑ === smp_store_release(&inode->i_size, i_size) folio_test_uptodate(folio) test_bit PG_uptodate smp_rmb() === ↓↓↓ LDAR ↓↓↓ === smp_load_acquire(&inode->i_size) copy_page_to_iter() ========================================================= Calling smp_store_release() in i_size_write() ensures that the data in the page and the PG_uptodate bit are updated before the isize is updated, and calling smp_load_acquire() in i_size_read ensures that it will not read a newer isize than the data in the page. Therefore, this avoids buffered read-write inconsistencies caused by Load-Load reordering. Link: https://lore.kernel.org/r/CAHk-=wifOnmeJq+sn+2s-P46zw0SFEbw9BSCGgp2c5fYPtRPGw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240124142857.4146716-2-libaokun1@huawei.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff d8f899d1 Wed Jan 24 07:28:55 MST 2024 Baokun Li <libaokun1@huawei.com> fs: make the i_size_read/write helpers be smp_load_acquire/store_release() In [Link] Linus mentions that acquire/release makes it clear which _particular_ memory accesses are the ordered ones, and it's unlikely to make any performance difference, so it's much better to pair up the release->acquire ordering than have a "wmb->rmb" ordering. ========================================================= update pagecache folio_mark_uptodate(folio) smp_wmb() set_bit PG_uptodate === ↑↑↑ STLR ↑↑↑ === smp_store_release(&inode->i_size, i_size) folio_test_uptodate(folio) test_bit PG_uptodate smp_rmb() === ↓↓↓ LDAR ↓↓↓ === smp_load_acquire(&inode->i_size) copy_page_to_iter() ========================================================= Calling smp_store_release() in i_size_write() ensures that the data in the page and the PG_uptodate bit are updated before the isize is updated, and calling smp_load_acquire() in i_size_read ensures that it will not read a newer isize than the data in the page. Therefore, this avoids buffered read-write inconsistencies caused by Load-Load reordering. Link: https://lore.kernel.org/r/CAHk-=wifOnmeJq+sn+2s-P46zw0SFEbw9BSCGgp2c5fYPtRPGw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240124142857.4146716-2-libaokun1@huawei.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
/linux-master/fs/nfsd/ | ||
H A D | vfs.c | diff 2d8ae8c4 Tue May 02 07:36:02 MDT 2023 Christian Brauner <brauner@kernel.org> nfsd: use vfs setgid helper We've aligned setgid behavior over multiple kernel releases. The details can be found in commit cf619f891971 ("Merge tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping") and commit 426b4ca2d6a5 ("Merge tag 'fs.setgid.v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux"). Consistent setgid stripping behavior is now encapsulated in the setattr_should_drop_sgid() helper which is used by all filesystems that strip setgid bits outside of vfs proper. Usually ATTR_KILL_SGID is raised in e.g., chown_common() and is subject to the setattr_should_drop_sgid() check to determine whether the setgid bit can be retained. Since nfsd is raising ATTR_KILL_SGID unconditionally it will cause notify_change() to strip it even if the caller had the necessary privileges to retain it. Ensure that nfsd only raises ATR_KILL_SGID if the caller lacks the necessary privileges to retain the setgid bit. Without this patch the setgid stripping tests in LTP will fail: > As you can see, the problem is S_ISGID (0002000) was dropped on a > non-group-executable file while chown was invoked by super-user, while [...] > fchown02.c:66: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700 [...] > chown02.c:57: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700 With this patch all tests pass. Reported-by: Sherry Yang <sherry.yang@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> diff 2d8ae8c4 Tue May 02 07:36:02 MDT 2023 Christian Brauner <brauner@kernel.org> nfsd: use vfs setgid helper We've aligned setgid behavior over multiple kernel releases. The details can be found in commit cf619f891971 ("Merge tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping") and commit 426b4ca2d6a5 ("Merge tag 'fs.setgid.v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux"). Consistent setgid stripping behavior is now encapsulated in the setattr_should_drop_sgid() helper which is used by all filesystems that strip setgid bits outside of vfs proper. Usually ATTR_KILL_SGID is raised in e.g., chown_common() and is subject to the setattr_should_drop_sgid() check to determine whether the setgid bit can be retained. Since nfsd is raising ATTR_KILL_SGID unconditionally it will cause notify_change() to strip it even if the caller had the necessary privileges to retain it. Ensure that nfsd only raises ATR_KILL_SGID if the caller lacks the necessary privileges to retain the setgid bit. Without this patch the setgid stripping tests in LTP will fail: > As you can see, the problem is S_ISGID (0002000) was dropped on a > non-group-executable file while chown was invoked by super-user, while [...] > fchown02.c:66: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700 [...] > chown02.c:57: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700 With this patch all tests pass. Reported-by: Sherry Yang <sherry.yang@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> diff de4eda9d Thu Sep 15 18:25:47 MDT 2022 Al Viro <viro@zeniv.linux.org.uk> use less confusing names for iov_iter direction initializers READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff de4eda9d Thu Sep 15 18:25:47 MDT 2022 Al Viro <viro@zeniv.linux.org.uk> use less confusing names for iov_iter direction initializers READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff 2c445a0e Tue Dec 28 12:26:03 MST 2021 Chuck Lever <chuck.lever@oracle.com> NFSD: De-duplicate net_generic(nf->nf_net, nfsd_net_id) Since this pointer is used repeatedly, move it to a stack variable. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> diff ea49dc79 Tue Jul 27 16:56:09 MDT 2021 NeilBrown <neilb@suse.de> NFSD: remove vanity comments Including one's name in copyright claims is appropriate. Including it in random comments is just vanity. After 2 decades, it is time for these to be gone. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> diff 6019ce07 Fri Mar 05 11:57:40 MST 2021 Chuck Lever <chuck.lever@oracle.com> NFSD: Add a tracepoint to record directory entry encoding Enable watching the progress of directory encoding to capture the timing of any issues with reading or encoding a directory. The new tracepoint captures dirent encoding for all NFS versions. For example, here's what a few NFSv4 directory entries might look like: nfsd-989 [002] 468.596265: nfsd_dirent: fh_hash=0x5d162594 ino=2 name=. nfsd-989 [002] 468.596267: nfsd_dirent: fh_hash=0x5d162594 ino=1 name=.. nfsd-989 [002] 468.596299: nfsd_dirent: fh_hash=0x5d162594 ino=3827 name=zlib.c nfsd-989 [002] 468.596325: nfsd_dirent: fh_hash=0x5d162594 ino=3811 name=xdiff nfsd-989 [002] 468.596351: nfsd_dirent: fh_hash=0x5d162594 ino=3810 name=xdiff-interface.h nfsd-989 [002] 468.596377: nfsd_dirent: fh_hash=0x5d162594 ino=3809 name=xdiff-interface.c Signed-off-by: Chuck Lever <chuck.lever@oracle.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff c11d7fd1 Tue Jun 23 16:39:24 MDT 2020 Frank van der Linden <fllinden@amazon.com> nfsd: take xattr bits into account for permission checks Since the NFSv4.2 extended attributes extension defines 3 new access bits for xattr operations, take them in to account when validating what the client is asking for, and when checking permissions. Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
H A D | nfsproc.c | diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2a1aa489 Sun Nov 03 09:50:18 MST 2019 Arnd Bergmann <arnd@arndb.de> nfsd: pass a 64-bit guardtime to nfsd_setattr() Guardtime handling in nfs3 differs between 32-bit and 64-bit architectures, and uses the deprecated time_t type. Change it to using time64_t, which behaves the same way on 64-bit and 32-bit architectures, treating the number as an unsigned 32-bit entity with a range of year 1970 to 2106 consistently, and avoiding the y2038 overflow. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> diff 83a63072 Mon Aug 26 11:03:11 MDT 2019 Trond Myklebust <trondmy@gmail.com> nfsd: fix nfs read eof detection Currently, the knfsd server assumes that a short read indicates an end of file. That assumption is incorrect. The short read means that either we've hit the end of file, or we've hit a read error. In the case of a read error, the client may want to retry (as per the implementation recommendations in RFC1813 and RFC7530), but currently it is being told that it hit an eof. Move the code to detect eof from version specific code into the generic nfsd read. Report eof only in the two following cases: 1) read() returns a zero length short read with no error. 2) the offset+length of the read is >= the file size. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff 2b0143b5 Tue Mar 17 16:25:59 MDT 2015 David Howells <dhowells@redhat.com> VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff 04716e66 Thu Aug 07 11:00:20 MDT 2008 J. Bruce Fields <bfields@citi.umich.edu> nfsd: permit unauthenticated stat of export root RFC 2623 section 2.3.2 permits the server to bypass gss authentication checks for certain operations that a client may perform when mounting. In the case of a client that doesn't have some form of credentials available to it on boot, this allows it to perform the mount unattended. (Presumably real file access won't be needed until a user with credentials logs in.) Being slightly more lenient allows lots of old clients to access krb5-only exports, with the only loss being a small amount of information leaked about the root directory of the export. This affects only v2 and v3; v4 still requires authentication for all access. Thanks to Peter Staubach testing against a Solaris client, which suggesting addition of v3 getattr, to the list, and to Trond for noting that doing so exposes no additional information. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Peter Staubach <staubach@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> diff c4d987ba Fri Oct 20 00:29:00 MDT 2006 Al Viro <viro@ftp.linux.org.uk> [PATCH] nfsd: NFSv{2,3} trivial endianness annotations for error values Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> |
/linux-master/fs/ubifs/ | ||
H A D | file.c | diff 2ec71843 Wed Jan 24 10:52:50 MST 2024 Matthew Wilcox (Oracle) <willy@infradead.org> ubifs: Convert write_begin_slow() to use a folio Update to new APIs, removing several calls to compound_head() and including support for large folios. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff 2cb1e089 Mon May 22 07:50:15 MDT 2023 David Howells <dhowells@redhat.com> splice: Use filemap_splice_read() instead of generic_file_splice_read() Replace pointers to generic_file_splice_read() with calls to filemap_splice_read(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> diff 66f4742e Tue May 31 21:00:00 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private The normal process cannot go to ubifs_releasepage() which means there exists pages being private but not dirty. Reproducer[1] shows that it could occur (which maybe related to [2]) with following process: PA PB PC lock(page)[PA] ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages[PA] lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage do_truncation[PB] truncate_setsize i_size_write(inode, newsize) // newsize = 0 i_size = i_size_read(inode) // i_size = 0 end_index = i_size >> PAGE_SHIFT if (page->index > end_index) goto out // jump out: unlock(page) // Private, Not Dirty generic_fadvise[PC] lock(page) invalidate_inode_page try_to_release_page ubifs_releasepage ubifs_assert(c, 0) // bad assertion! unlock(page) truncate_pagecache[PB] Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1513 UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308 Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x67/0x1d0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 __invalidate_mapping_pages+0xb9/0x280 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 ksys_fadvise64_64+0x4c/0xb0 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215373 [2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff 66f4742e Tue May 31 21:00:00 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private The normal process cannot go to ubifs_releasepage() which means there exists pages being private but not dirty. Reproducer[1] shows that it could occur (which maybe related to [2]) with following process: PA PB PC lock(page)[PA] ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages[PA] lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage do_truncation[PB] truncate_setsize i_size_write(inode, newsize) // newsize = 0 i_size = i_size_read(inode) // i_size = 0 end_index = i_size >> PAGE_SHIFT if (page->index > end_index) goto out // jump out: unlock(page) // Private, Not Dirty generic_fadvise[PC] lock(page) invalidate_inode_page try_to_release_page ubifs_releasepage ubifs_assert(c, 0) // bad assertion! unlock(page) truncate_pagecache[PB] Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1513 UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308 Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x67/0x1d0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 __invalidate_mapping_pages+0xb9/0x280 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 ksys_fadvise64_64+0x4c/0xb0 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215373 [2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff 66f4742e Tue May 31 21:00:00 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private The normal process cannot go to ubifs_releasepage() which means there exists pages being private but not dirty. Reproducer[1] shows that it could occur (which maybe related to [2]) with following process: PA PB PC lock(page)[PA] ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages[PA] lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage do_truncation[PB] truncate_setsize i_size_write(inode, newsize) // newsize = 0 i_size = i_size_read(inode) // i_size = 0 end_index = i_size >> PAGE_SHIFT if (page->index > end_index) goto out // jump out: unlock(page) // Private, Not Dirty generic_fadvise[PC] lock(page) invalidate_inode_page try_to_release_page ubifs_releasepage ubifs_assert(c, 0) // bad assertion! unlock(page) truncate_pagecache[PB] Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1513 UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308 Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x67/0x1d0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 __invalidate_mapping_pages+0xb9/0x280 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 ksys_fadvise64_64+0x4c/0xb0 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215373 [2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff 66f4742e Tue May 31 21:00:00 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private The normal process cannot go to ubifs_releasepage() which means there exists pages being private but not dirty. Reproducer[1] shows that it could occur (which maybe related to [2]) with following process: PA PB PC lock(page)[PA] ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages[PA] lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage do_truncation[PB] truncate_setsize i_size_write(inode, newsize) // newsize = 0 i_size = i_size_read(inode) // i_size = 0 end_index = i_size >> PAGE_SHIFT if (page->index > end_index) goto out // jump out: unlock(page) // Private, Not Dirty generic_fadvise[PC] lock(page) invalidate_inode_page try_to_release_page ubifs_releasepage ubifs_assert(c, 0) // bad assertion! unlock(page) truncate_pagecache[PB] Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1513 UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308 Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x67/0x1d0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 __invalidate_mapping_pages+0xb9/0x280 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 ksys_fadvise64_64+0x4c/0xb0 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215373 [2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff fb8bc4c7 Tue May 31 20:59:59 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_writepage: Mark page dirty after writing inode failed There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private There is a third possibility which maybe related to [1] that page is private but not dirty caused by following process: PA lock(page) ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage write_inode // fail, goto out, following codes are not executed // do_writepage // set_page_writeback // set Writeback // detach_page_private // clear Private // end_page_writeback // clear Writeback out: unlock(page) // Private, Not Dirty PB ksys_fadvise64_64 generic_fadvise invalidate_inode_page // page is neither Dirty nor Writeback invalidate_complete_page // page_has_private is true try_to_release_page ubifs_releasepage ubifs_assert(c, 0) !!! Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1499 UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x7e/0x1e0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 vfs_fadvise+0x35/0x40 ksys_fadvise64_64+0x4c/0xb0 Jump [2] to find a reproducer. [1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty [2] https://bugzilla.kernel.org/show_bug.cgi?id=215357 Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff fb8bc4c7 Tue May 31 20:59:59 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_writepage: Mark page dirty after writing inode failed There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private There is a third possibility which maybe related to [1] that page is private but not dirty caused by following process: PA lock(page) ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage write_inode // fail, goto out, following codes are not executed // do_writepage // set_page_writeback // set Writeback // detach_page_private // clear Private // end_page_writeback // clear Writeback out: unlock(page) // Private, Not Dirty PB ksys_fadvise64_64 generic_fadvise invalidate_inode_page // page is neither Dirty nor Writeback invalidate_complete_page // page_has_private is true try_to_release_page ubifs_releasepage ubifs_assert(c, 0) !!! Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1499 UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x7e/0x1e0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 vfs_fadvise+0x35/0x40 ksys_fadvise64_64+0x4c/0xb0 Jump [2] to find a reproducer. [1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty [2] https://bugzilla.kernel.org/show_bug.cgi?id=215357 Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff fb8bc4c7 Tue May 31 20:59:59 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_writepage: Mark page dirty after writing inode failed There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private There is a third possibility which maybe related to [1] that page is private but not dirty caused by following process: PA lock(page) ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage write_inode // fail, goto out, following codes are not executed // do_writepage // set_page_writeback // set Writeback // detach_page_private // clear Private // end_page_writeback // clear Writeback out: unlock(page) // Private, Not Dirty PB ksys_fadvise64_64 generic_fadvise invalidate_inode_page // page is neither Dirty nor Writeback invalidate_complete_page // page_has_private is true try_to_release_page ubifs_releasepage ubifs_assert(c, 0) !!! Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1499 UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x7e/0x1e0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 vfs_fadvise+0x35/0x40 ksys_fadvise64_64+0x4c/0xb0 Jump [2] to find a reproducer. [1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty [2] https://bugzilla.kernel.org/show_bug.cgi?id=215357 Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> diff fb8bc4c7 Tue May 31 20:59:59 MDT 2022 Zhihao Cheng <chengzhihao1@huawei.com> ubifs: ubifs_writepage: Mark page dirty after writing inode failed There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private There is a third possibility which maybe related to [1] that page is private but not dirty caused by following process: PA lock(page) ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage write_inode // fail, goto out, following codes are not executed // do_writepage // set_page_writeback // set Writeback // detach_page_private // clear Private // end_page_writeback // clear Writeback out: unlock(page) // Private, Not Dirty PB ksys_fadvise64_64 generic_fadvise invalidate_inode_page // page is neither Dirty nor Writeback invalidate_complete_page // page_has_private is true try_to_release_page ubifs_releasepage ubifs_assert(c, 0) !!! Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1499 UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x7e/0x1e0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 vfs_fadvise+0x35/0x40 ksys_fadvise64_64+0x4c/0xb0 Jump [2] to find a reproducer. [1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty [2] https://bugzilla.kernel.org/show_bug.cgi?id=215357 Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> |
/linux-master/fs/overlayfs/ | ||
H A D | copy_up.c | diff 2c3ef4f8 Mon Nov 20 06:43:34 MST 2023 Amir Goldstein <amir73il@gmail.com> ovl: initialize ovl_copy_up_ctx.destname inside ovl_do_copy_up() The ->destname member of struct ovl_copy_up_ctx is initialized inside ovl_copy_up_one() to ->d_name of the overlayfs dentry being copied up and then it may be overridden by index name inside ovl_do_copy_up(). ovl_inode_lock() in ovl_copy_up_start() and ovl_copy_up() in ovl_rename() effectively stabilze ->d_name of the overlayfs dentry being copied up, but ovl_inode_lock() is not held when ->d_name is being read. It is not a correctness bug, because if ovl_do_copy_up() races with ovl_rename() and ctx.destname is freed, we will not end up calling ovl_do_copy_up() with the dead name reference. The code becomes much easier to understand and to document if the initialization of c->destname is always done inside ovl_do_copy_up(), either to the index entry name, or to the overlay dentry ->d_name. Signed-off-by: Amir Goldstein <amir73il@gmail.com> diff 0f292086 Tue Dec 12 02:44:36 MST 2023 Amir Goldstein <amir73il@gmail.com> splice: return type ssize_t from all helpers Not sure why some splice helpers return long, maybe historic reasons. Change them all to return ssize_t to conform to the splice methods and to the rest of the helpers. Suggested-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20231208-horchen-helium-d3ec1535ede5@brauner/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20231212094440.250945-2-amir73il@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> diff ca7ab482 Wed Nov 22 05:27:00 MST 2023 Amir Goldstein <amir73il@gmail.com> ovl: add permission hooks outside of do_splice_direct() The main callers of do_splice_direct() also call rw_verify_area() for the entire range that is being copied, e.g. by vfs_copy_file_range() or do_sendfile() before calling do_splice_direct(). The only caller that does not have those checks for entire range is ovl_copy_up_file(). In preparation for removing the checks inside do_splice_direct(), add rw_verify_area() call in ovl_copy_up_file(). For extra safety, perform minimal sanity checks from rw_verify_area() for non negative offsets also in the copy up do_splice_direct() loop without calling the file permission hooks. This is needed for fanotify "pre content" events. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20231122122715.2561213-2-amir73il@gmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 4f11ada1 Tue Jan 24 08:41:18 MST 2023 Miklos Szeredi <mszeredi@redhat.com> ovl: fail on invalid uid/gid mapping at copy up If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then copy-up should fail, just like it would fail if the mounter task was doing the copy using "cp -a". There's a corner case where the "cp -a" would succeed but copy up fail: if there's a mapping of the invalid uid/gid (65534 by default) in the user namespace. This is because stat(2) will return this value if the mapping doesn't exist in the current user_ns and "cp -a" will in turn be able to create a file with this uid/gid. This behavior would be inconsistent with POSIX ACL's, which return -1 for invalid uid/gid which result in a failed copy. For consistency and simplicity fail the copy of the st_uid/st_gid are invalid. Fixes: 459c7c565ac3 ("ovl: unprivieged mounts") Cc: <stable@vger.kernel.org> # v5.11 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Seth Forshee <sforshee@kernel.org> diff baabaa50 Tue Jan 24 08:41:18 MST 2023 Miklos Szeredi <mszeredi@redhat.com> ovl: fix tmpfile leak Missed an error cleanup. Reported-by: syzbot+fd749a7ea127a84e0ffd@syzkaller.appspotmail.com Fixes: 2b1a77461f16 ("ovl: use vfs_tmpfile_open() helper") Cc: <stable@vger.kernel.org> # v6.1 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 2b1a7746 Fri Sep 23 23:00:00 MDT 2022 Miklos Szeredi <mszeredi@redhat.com> ovl: use vfs_tmpfile_open() helper If tmpfile is used for copy up, then use this helper to create the tmpfile and open it at the same time. This will later allow filesystems such as fuse to do this operation atomically. Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 2d343087 Thu Aug 04 11:11:15 MDT 2022 Al Viro <viro@zeniv.linux.org.uk> overlayfs: constify path Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff 5b0a414d Thu Nov 04 07:04:52 MDT 2021 Miklos Szeredi <mszeredi@redhat.com> ovl: fix filattr copy-up failure This regression can be reproduced with ntfs-3g and overlayfs: mkdir lower upper work overlay dd if=/dev/zero of=ntfs.raw bs=1M count=2 mkntfs -F ntfs.raw mount ntfs.raw lower touch lower/file.txt mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work - overlay mv overlay/file.txt overlay/file2.txt mv fails and (misleadingly) prints mv: cannot move 'overlay/file.txt' to a subdirectory of itself, 'overlay/file2.txt' The reason is that ovl_copy_fileattr() is triggered due to S_NOATIME being set on all inodes (by fuse) regardless of fileattr. ovl_copy_fileattr() tries to retrieve file attributes from lower file, but that fails because filesystem does not support this ioctl (this should fail with ENOTTY, but ntfs-3g return EINVAL instead). This failure is propagated to origial operation (in this case rename) that triggered the copy-up. The fix is to ignore ENOTTY and EINVAL errors from fileattr_get() in copy up. This also requires turning the internal ENOIOCTLCMD into ENOTTY. As a further measure to prevent unnecessary failures, only try the fileattr_get/set on upper if there are any flags to copy up. Side note: a number of filesystems set S_NOATIME (and sometimes other inode flags) irrespective of fileattr flags. This causes unnecessary calls during copy up, which might lead to a performance issue, especially if latency is high. To fix this, the kernel would need to differentiate between the two cases. E.g. introduce SB_NOATIME_UPDATE, a per-sb variant of S_NOATIME. SB_NOATIME doesn't work, because that's interpreted as "filesystem doesn't store an atime attribute" Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name> Fixes: 72db82115d2b ("ovl: copy up sync/noatime fileattr flags") Cc: <stable@vger.kernel.org> # v5.15 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
H A D | super.c | diff 2bc5e5e8 Thu Oct 12 09:36:57 MDT 2023 Christian Brauner <brauner@kernel.org> ovl: rely on SB_I_NOUMASK In commit f61b9bb3f838 ("fs: add a new SB_I_NOUMASK flag") we added a new SB_I_NOUMASK flag that is used by filesystems like NFS to indicate that umask stripping is never supposed to be done in the vfs independent of whether or not POSIX ACLs are supported. Overlayfs falls into the same category as it raises SB_POSIXACL unconditionally to defer umask application to the upper filesystem. Now that we have SB_I_NOUMASK use that and make SB_POSIXACL properly conditional on whether or not the kernel does have support for it. This will enable use to turn IS_POSIXACL() into nop on kernels that don't have POSIX ACL support avoding bugs from missed umask stripping. Link: https://lore.kernel.org/r/20231012-einband-uferpromenade-80541a047a1f@brauner Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff ceecc2d8 Tue Jun 20 05:42:38 MDT 2023 Christian Brauner <brauner@kernel.org> ovl: reserve ability to reconfigure mount options with new mount api Using the old mount api to remount an overlayfs superblock via mount(MS_REMOUNT) all mount options will be silently ignored. For example, if you create an overlayfs mount: mount -t overlay overlay -o lowerdir=/mnt/a:/mnt/b,upperdir=/mnt/upper,workdir=/mnt/work /mnt/merged and then issue a remount via: # force mount(8) to use mount(2) export LIBMOUNT_FORCE_MOUNT2=always mount -t overlay overlay -o remount,WOOTWOOT,lowerdir=/DOESNT-EXIST /mnt/merged with completely nonsensical mount options whatsoever it will succeed nonetheless. This prevents us from every changing any mount options we might introduce in the future that could reasonably be changed during a remount. We don't need to carry this issue into the new mount api port. Similar to FUSE we can use the fs_context::oldapi member to figure out that this is a request coming through the legacy mount api. If we detect it we continue silently ignoring all mount options. But for the new mount api we simply report that mount options cannot currently be changed. This will allow us to potentially alter mount properties for new or even old properties. It any case, silently ignoring everything is not something new apis should do. Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> diff b36a5780 Fri Jun 16 07:54:19 MDT 2023 Christian Brauner <brauner@kernel.org> ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> diff 2b21da92 Wed Apr 26 15:21:46 MDT 2023 Amir Goldstein <amir73il@gmail.com> ovl: prepare to store lowerdata redirect for lazy lowerdata lookup Prepare to allow ovl_lookup() to leave the last entry in a non-dir lowerstack empty to signify lazy lowerdata lookup. In this case, ovl_lookup() stores the redirect path from metacopy to lowerdata in ovl_inode, which is going to be used later to perform the lazy lowerdata lookup. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 2b1a7746 Fri Sep 23 23:00:00 MDT 2022 Miklos Szeredi <mszeredi@redhat.com> ovl: use vfs_tmpfile_open() helper If tmpfile is used for copy up, then use this helper to create the tmpfile and open it at the same time. This will later allow filesystems such as fuse to do this operation atomically. Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 2d343087 Thu Aug 04 11:11:15 MDT 2022 Al Viro <viro@zeniv.linux.org.uk> overlayfs: constify path Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff 4a47c638 Wed Jul 06 07:56:11 MDT 2022 Christian Brauner <brauner@kernel.org> ovl: turn of SB_POSIXACL with idmapped layers temporarily This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I have sent out an patch that fixes this and makes POSIX ACLs work correctly but the patch is a bit bigger and we're already at -rc5 so I recommend we simply don't raise SB_POSIXACL when idmapped layers are used. Then we can fix the VFS part described below for the next merge window so we can have good exposure in -next. I'm going to give a rather detailed explanation to both the origin of the problem and mention the solution so people know what's going on. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we simply move the idmapped mount translation into a separate step performed in vfs_{g,s}etxattr() instead of in posix_acl_fix_xattr_{from,to}_user(). To see how this fixes things let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. The simple solution is to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission(). Since overlayfs doesn't cache ACLs they'll be released right after. Link: https://github.com/brauner/mount-idmapped/issues/9 Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: linux-unionfs@vger.kernel.org Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Fixes: bc70682a497c ("ovl: support idmapped layers") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 4a47c638 Wed Jul 06 07:56:11 MDT 2022 Christian Brauner <brauner@kernel.org> ovl: turn of SB_POSIXACL with idmapped layers temporarily This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I have sent out an patch that fixes this and makes POSIX ACLs work correctly but the patch is a bit bigger and we're already at -rc5 so I recommend we simply don't raise SB_POSIXACL when idmapped layers are used. Then we can fix the VFS part described below for the next merge window so we can have good exposure in -next. I'm going to give a rather detailed explanation to both the origin of the problem and mention the solution so people know what's going on. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we simply move the idmapped mount translation into a separate step performed in vfs_{g,s}etxattr() instead of in posix_acl_fix_xattr_{from,to}_user(). To see how this fixes things let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. The simple solution is to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission(). Since overlayfs doesn't cache ACLs they'll be released right after. Link: https://github.com/brauner/mount-idmapped/issues/9 Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: linux-unionfs@vger.kernel.org Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Fixes: bc70682a497c ("ovl: support idmapped layers") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff 4a47c638 Wed Jul 06 07:56:11 MDT 2022 Christian Brauner <brauner@kernel.org> ovl: turn of SB_POSIXACL with idmapped layers temporarily This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I have sent out an patch that fixes this and makes POSIX ACLs work correctly but the patch is a bit bigger and we're already at -rc5 so I recommend we simply don't raise SB_POSIXACL when idmapped layers are used. Then we can fix the VFS part described below for the next merge window so we can have good exposure in -next. I'm going to give a rather detailed explanation to both the origin of the problem and mention the solution so people know what's going on. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we simply move the idmapped mount translation into a separate step performed in vfs_{g,s}etxattr() instead of in posix_acl_fix_xattr_{from,to}_user(). To see how this fixes things let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. The simple solution is to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission(). Since overlayfs doesn't cache ACLs they'll be released right after. Link: https://github.com/brauner/mount-idmapped/issues/9 Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: linux-unionfs@vger.kernel.org Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Fixes: bc70682a497c ("ovl: support idmapped layers") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> diff bb49e9e7 Thu Dec 02 16:16:58 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> fs: add is_idmapped_mnt() helper Multiple places open-code the same check to determine whether a given mount is idmapped. Introduce a simple helper function that can be used instead. This allows us to get rid of the fragile open-coding. We will later change the check that is used to determine whether a given mount is idmapped. Introducing a helper allows us to do this in a single place instead of doing it for multiple places. Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff bb49e9e7 Thu Dec 02 16:16:58 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> fs: add is_idmapped_mnt() helper Multiple places open-code the same check to determine whether a given mount is idmapped. Introduce a simple helper function that can be used instead. This allows us to get rid of the fragile open-coding. We will later change the check that is used to determine whether a given mount is idmapped. Introducing a helper allows us to do this in a single place instead of doing it for multiple places. Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff bb49e9e7 Thu Dec 02 16:16:58 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> fs: add is_idmapped_mnt() helper Multiple places open-code the same check to determine whether a given mount is idmapped. Introduce a simple helper function that can be used instead. This allows us to get rid of the fragile open-coding. We will later change the check that is used to determine whether a given mount is idmapped. Introducing a helper allows us to do this in a single place instead of doing it for multiple places. Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
/linux-master/fs/f2fs/ | ||
H A D | file.c | diff 2f6d721e Tue Mar 05 20:47:46 MST 2024 Xiuhong Wang <xiuhong.wang@unisoc.com> f2fs: compress: fix reserve_cblocks counting error when out of space When a file only needs one direct_node, performing the following operations will cause the file to be unrepairable: unisoc # ./f2fs_io compress test.apk unisoc #df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.2M 100% /data unisoc # ./f2fs_io release_cblocks test.apk 924 unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 4.8M 100% /data unisoc # dd if=/dev/random of=file4 bs=1M count=3 3145728 bytes (3.0 M) copied, 0.025 s, 120 M/s unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 0 This is because the file has only one direct_node. After returning to -ENOSPC, reserved_blocks += ret will not be executed. As a result, the reserved_blocks at this time is still 0, which is not the real number of reserved blocks. Therefore, fsck cannot be set to repair the file. After this patch, the fsck flag will be set to fix this problem. unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot then fsck will be executed unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 924 Fixes: c75488fb4d82 ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS") Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com> Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 2fc2bcc8 Sun Feb 25 20:19:16 MST 2024 Chao Yu <chao@kernel.org> f2fs: fix to check return value in f2fs_insert_range() In f2fs_insert_range(), it missed to check return value of filemap_write_and_wait_range(), fix it. Meanwhile, just return error number once __exchange_data_block() fails. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 4961acdd Sun Dec 10 04:35:42 MST 2023 Chao Yu <chao@kernel.org> f2fs: fix to tag gcing flag on page during block migration It needs to add missing gcing flag on page during block migration, in order to garantee migrated data be persisted during checkpoint, otherwise out-of-order persistency between data and node may cause data corruption after SPOR. Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment"). Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 982c3b30 Tue Oct 24 07:01:08 MDT 2023 Christian Brauner <brauner@kernel.org> bdev: rename freeze and thaw helpers We have bdev_mark_dead() etc and we're going to move block device freezing to holder ops in the next patch. Make the naming consistent: * freeze_bdev() -> bdev_freeze() * thaw_bdev() -> bdev_thaw() Also document the return code. Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-2-599c19f4faac@kernel.org Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 4ed33e69 Tue Oct 03 16:51:49 MDT 2023 Jaegeuk Kim <jaegeuk@kernel.org> f2fs: stop iterating f2fs_map_block if hole exists Let's avoid unnecessary f2fs_map_block calls to load extents. # f2fs_io fadvise willneed 0 4096 /data/local/tmp/test f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0 ... f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 4ed33e69 Tue Oct 03 16:51:49 MDT 2023 Jaegeuk Kim <jaegeuk@kernel.org> f2fs: stop iterating f2fs_map_block if hole exists Let's avoid unnecessary f2fs_map_block calls to load extents. # f2fs_io fadvise willneed 0 4096 /data/local/tmp/test f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0 ... f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 4ed33e69 Tue Oct 03 16:51:49 MDT 2023 Jaegeuk Kim <jaegeuk@kernel.org> f2fs: stop iterating f2fs_map_block if hole exists Let's avoid unnecessary f2fs_map_block calls to load extents. # f2fs_io fadvise willneed 0 4096 /data/local/tmp/test f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0 ... f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 4ed33e69 Tue Oct 03 16:51:49 MDT 2023 Jaegeuk Kim <jaegeuk@kernel.org> f2fs: stop iterating f2fs_map_block if hole exists Let's avoid unnecessary f2fs_map_block calls to load extents. # f2fs_io fadvise willneed 0 4096 /data/local/tmp/test f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0 ... f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 4ed33e69 Tue Oct 03 16:51:49 MDT 2023 Jaegeuk Kim <jaegeuk@kernel.org> f2fs: stop iterating f2fs_map_block if hole exists Let's avoid unnecessary f2fs_map_block calls to load extents. # f2fs_io fadvise willneed 0 4096 /data/local/tmp/test f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0 ... f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 4ed33e69 Tue Oct 03 16:51:49 MDT 2023 Jaegeuk Kim <jaegeuk@kernel.org> f2fs: stop iterating f2fs_map_block if hole exists Let's avoid unnecessary f2fs_map_block calls to load extents. # f2fs_io fadvise willneed 0 4096 /data/local/tmp/test f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0 ... f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> diff 4ed33e69 Tue Oct 03 16:51:49 MDT 2023 Jaegeuk Kim <jaegeuk@kernel.org> f2fs: stop iterating f2fs_map_block if hole exists Let's avoid unnecessary f2fs_map_block calls to load extents. # f2fs_io fadvise willneed 0 4096 /data/local/tmp/test f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2, f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0 ... f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0 f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
/linux-master/fs/ | ||
H A D | inode.c | diff 8b3d8381 Tue Jan 16 00:53:35 MST 2024 Baolin Wang <baolin.wang@linux.alibaba.com> fs: improve dump_mapping() robustness We met a kernel crash issue when running stress-ng testing, and the system crashes when printing the dentry name in dump_mapping(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... The root cause is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. The page migration issue has been fixed by commit d1adb25df711 ("mm: migrate: fix getting incorrect page mapping during page migration"). In addition, Matthew suggested we should also improve dump_mapping()'s robustness to resilient against the kernel crash [1]. With checking the 'dentry.parent' and 'dentry.d_name.name' used by dentry_name(), I can see dump_mapping() will output the invalid dentry instead of crashing the system when this issue is reproduced again. [12211.189128] page:fffff7de047741c0 refcount:1 mapcount:0 mapping:ffff989117f55ea0 index:0x1 pfn:0x211dd07 [12211.189144] aops:0x0 ino:1 invalid dentry:74786574206e6870 [12211.189148] flags: 0x57ffffc0000001(locked|node=1|zone=2|lastcpupid=0x1fffff) [12211.189150] page_type: 0xffffffff() [12211.189153] raw: 0057ffffc0000001 0000000000000000 dead000000000122 ffff989117f55ea0 [12211.189154] raw: 0000000000000001 0000000000000001 00000001ffffffff 0000000000000000 [12211.189155] page dumped because: unmovable page [1] https://lore.kernel.org/all/ZXxn%2F0oixJxxAnpF@casper.infradead.org/ Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/937ab1f87328516821d39be672b6bc18861d9d3e.1705391420.git.baolin.wang@linux.alibaba.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff 8b3d8381 Tue Jan 16 00:53:35 MST 2024 Baolin Wang <baolin.wang@linux.alibaba.com> fs: improve dump_mapping() robustness We met a kernel crash issue when running stress-ng testing, and the system crashes when printing the dentry name in dump_mapping(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... The root cause is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. The page migration issue has been fixed by commit d1adb25df711 ("mm: migrate: fix getting incorrect page mapping during page migration"). In addition, Matthew suggested we should also improve dump_mapping()'s robustness to resilient against the kernel crash [1]. With checking the 'dentry.parent' and 'dentry.d_name.name' used by dentry_name(), I can see dump_mapping() will output the invalid dentry instead of crashing the system when this issue is reproduced again. [12211.189128] page:fffff7de047741c0 refcount:1 mapcount:0 mapping:ffff989117f55ea0 index:0x1 pfn:0x211dd07 [12211.189144] aops:0x0 ino:1 invalid dentry:74786574206e6870 [12211.189148] flags: 0x57ffffc0000001(locked|node=1|zone=2|lastcpupid=0x1fffff) [12211.189150] page_type: 0xffffffff() [12211.189153] raw: 0057ffffc0000001 0000000000000000 dead000000000122 ffff989117f55ea0 [12211.189154] raw: 0000000000000001 0000000000000001 00000001ffffffff 0000000000000000 [12211.189155] page dumped because: unmovable page [1] https://lore.kernel.org/all/ZXxn%2F0oixJxxAnpF@casper.infradead.org/ Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/937ab1f87328516821d39be672b6bc18861d9d3e.1705391420.git.baolin.wang@linux.alibaba.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff 9d5b9475 Mon Nov 20 16:35:12 MST 2023 Joel Granados <j.granados@samsung.com> fs: Remove the now superfluous sentinel elements from ctl_table array This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel elements ctl_table struct. Special attention was placed in making sure that an empty directory for fs/verity was created when CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not defined. In this case we use the register sysctl call that expects a size. Signed-off-by: Joel Granados <j.granados@samsung.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> diff 0a97c01c Thu Nov 30 12:40:18 MST 2023 Nhat Pham <nphamcs@gmail.com> list_lru: allow explicit memcg and NUMA node selection Patch series "workload-specific and memory pressure-driven zswap writeback", v8. There are currently several issues with zswap writeback: 1. There is only a single global LRU for zswap, making it impossible to perform worload-specific shrinking - an memcg under memory pressure cannot determine which pages in the pool it owns, and often ends up writing pages from other memcgs. This issue has been previously observed in practice and mitigated by simply disabling memcg-initiated shrinking: https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u But this solution leaves a lot to be desired, as we still do not have an avenue for an memcg to free up its own memory locked up in the zswap pool. 2. We only shrink the zswap pool when the user-defined limit is hit. This means that if we set the limit too high, cold data that are unlikely to be used again will reside in the pool, wasting precious memory. It is hard to predict how much zswap space will be needed ahead of time, as this depends on the workload (specifically, on factors such as memory access patterns and compressibility of the memory pages). This patch series solves these issues by separating the global zswap LRU into per-memcg and per-NUMA LRUs, and performs workload-specific (i.e memcg- and NUMA-aware) zswap writeback under memory pressure. The new shrinker does not have any parameter that must be tuned by the user, and can be opted in or out on a per-memcg basis. As a proof of concept, we ran the following synthetic benchmark: build the linux kernel in a memory-limited cgroup, and allocate some cold data in tmpfs to see if the shrinker could write them out and improved the overall performance. Depending on the amount of cold data generated, we observe from 14% to 35% reduction in kernel CPU time used in the kernel builds. This patch (of 6): The interface of list_lru is based on the assumption that the list node and the data it represents belong to the same allocated on the correct node/memcg. While this assumption is valid for existing slab objects LRU such as dentries and inodes, it is undocumented, and rather inflexible for certain potential list_lru users (such as the upcoming zswap shrinker and the THP shrinker). It has caused us a lot of issues during our development. This patch changes list_lru interface so that the caller must explicitly specify numa node and memcg when adding and removing objects. The old list_lru_add() and list_lru_del() are renamed to list_lru_add_obj() and list_lru_del_obj(), respectively. It also extends the list_lru API with a new function, list_lru_putback, which undoes a previous list_lru_isolate call. Unlike list_lru_add, it does not increment the LRU node count (as list_lru_isolate does not decrement the node count). list_lru_putback also allows for explicit memcg and NUMA node selection. Link: https://lkml.kernel.org/r/20231130194023.4102148-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20231130194023.4102148-2-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 0a97c01c Thu Nov 30 12:40:18 MST 2023 Nhat Pham <nphamcs@gmail.com> list_lru: allow explicit memcg and NUMA node selection Patch series "workload-specific and memory pressure-driven zswap writeback", v8. There are currently several issues with zswap writeback: 1. There is only a single global LRU for zswap, making it impossible to perform worload-specific shrinking - an memcg under memory pressure cannot determine which pages in the pool it owns, and often ends up writing pages from other memcgs. This issue has been previously observed in practice and mitigated by simply disabling memcg-initiated shrinking: https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u But this solution leaves a lot to be desired, as we still do not have an avenue for an memcg to free up its own memory locked up in the zswap pool. 2. We only shrink the zswap pool when the user-defined limit is hit. This means that if we set the limit too high, cold data that are unlikely to be used again will reside in the pool, wasting precious memory. It is hard to predict how much zswap space will be needed ahead of time, as this depends on the workload (specifically, on factors such as memory access patterns and compressibility of the memory pages). This patch series solves these issues by separating the global zswap LRU into per-memcg and per-NUMA LRUs, and performs workload-specific (i.e memcg- and NUMA-aware) zswap writeback under memory pressure. The new shrinker does not have any parameter that must be tuned by the user, and can be opted in or out on a per-memcg basis. As a proof of concept, we ran the following synthetic benchmark: build the linux kernel in a memory-limited cgroup, and allocate some cold data in tmpfs to see if the shrinker could write them out and improved the overall performance. Depending on the amount of cold data generated, we observe from 14% to 35% reduction in kernel CPU time used in the kernel builds. This patch (of 6): The interface of list_lru is based on the assumption that the list node and the data it represents belong to the same allocated on the correct node/memcg. While this assumption is valid for existing slab objects LRU such as dentries and inodes, it is undocumented, and rather inflexible for certain potential list_lru users (such as the upcoming zswap shrinker and the THP shrinker). It has caused us a lot of issues during our development. This patch changes list_lru interface so that the caller must explicitly specify numa node and memcg when adding and removing objects. The old list_lru_add() and list_lru_del() are renamed to list_lru_add_obj() and list_lru_del_obj(), respectively. It also extends the list_lru API with a new function, list_lru_putback, which undoes a previous list_lru_isolate call. Unlike list_lru_add, it does not increment the LRU node count (as list_lru_isolate does not decrement the node count). list_lru_putback also allows for explicit memcg and NUMA node selection. Link: https://lkml.kernel.org/r/20231130194023.4102148-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20231130194023.4102148-2-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 762321da Wed Oct 25 08:10:17 MDT 2023 Christoph Hellwig <hch@lst.de> filemap: add a per-mapping stable writes flag folio_wait_stable waits for writeback to finish before modifying the contents of a folio again, e.g. to support check summing of the data in the block integrity code. Currently this behavior is controlled by the SB_I_STABLE_WRITES flag on the super_block, which means it is uniform for the entire file system. This is wrong for the block device pseudofs which is shared by all block devices, or file systems that can use multiple devices like XFS witht the RT subvolume or btrfs (although btrfs currently reimplements folio_wait_stable anyway). Add a per-address_space AS_STABLE_WRITES flag to control the behavior in a more fine grained way. The existing SB_I_STABLE_WRITES is kept to initialize AS_STABLE_WRITES to the existing default which covers most cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231025141020.192413-2-hch@lst.de Tested-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 16a94965 Wed Oct 04 12:52:38 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: convert core infrastructure to new timestamp accessors Convert the core vfs code to use the new timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185239.80830-2-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> diff 3e15dcf7 Fri Sep 08 07:28:59 MDT 2023 Amir Goldstein <amir73il@gmail.com> fs: rename __mnt_{want,drop}_write*() helpers Before exporting these helpers to modules, make their names more meaningful. The names mnt_{get,put)_write_access*() were chosen, because they rhyme with the inode {get,put)_write_access() helpers, which have a very close meaning for the inode object. Suggested-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230817-anfechtbar-ruhelosigkeit-8c6cca8443fc@brauner/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Message-Id: <20230908132900.2983519-2-amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 9b6304c1 Wed Jul 05 12:58:10 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: add ctime accessors infrastructure struct timespec64 has unused bits in the tv_nsec field that can be used for other purposes. In future patches, we're going to change how the inode->i_ctime is accessed in certain inodes in order to make use of them. In order to do that safely though, we'll need to eradicate raw accesses of the inode->i_ctime field from the kernel. Add new accessor functions for the ctime that we use to replace them. Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Message-Id: <20230705185812.579118-2-jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 33ab231f Mon Jul 03 08:49:12 MDT 2023 Christian Brauner <brauner@kernel.org> fs: don't assume arguments are non-NULL The helper is explicitly documented as locking zero, one, or two arguments. While all current callers do pass non-NULL arguments there's no need or requirement for them to do so according to the code and the unlock_two_nondirectories() helper is pretty clear about it as well. So only call WARN_ON_ONCE() if the checked inode is valid. Fixes: 2454ad83b90a ("fs: Restrict lock_two_nondirectories() to non-directory inodes") Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jan Kara <jack@suse.cz> Message-Id: <20230703-vfs-rename-source-v1-2-37eebb29b65b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
H A D | libfs.c | diff ae62bcb5 Mon Oct 23 08:30:49 MDT 2023 Amir Goldstein <amir73il@gmail.com> fs: report f_fsid from s_dev for "simple" filesystems There are many "simple" filesystems (*) that report null f_fsid in statfs(2). Those "simple" filesystems report sb->s_dev as the st_dev field of the stat syscalls for all inodes of the filesystem (**). In order to enable fanotify reporting of events with fsid on those "simple" filesystems, report the sb->s_dev number in f_fsid field of statfs(2). (*) For most of the "simple" filesystem refered to in this commit, the ->statfs() operation is simple_statfs(). Some of those fs assign the simple_statfs() method directly in their ->s_op struct and some assign it indirectly via a call to simple_fill_super() or to pseudo_fs_fill_super() with either custom or "simple" s_op. We also make the same change to efivarfs and hugetlbfs, although they do not use simple_statfs(), because they use the simple_* inode opreations (e.g. simple_lookup()). (**) For most of the "simple" filesystems, the ->getattr() method is not assigned, so stat() is implemented by generic_fillattr(). A few "simple" filesystem use the simple_getattr() method which also calls generic_fillattr() to fill most of the stat struct. The two exceptions are procfs and 9p. procfs implements several different ->getattr() methods, but they all end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. 9p has more complicated ->getattr() methods, but they too, end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. Note that 9p and kernfs also call simple_statfs() from custom ->statfs() methods which already fill the f_fsid field, but v9fs_statfs() calls simple_statfs() only in case f_fsid was not filled and kenrfs_statfs() overwrites f_fsid after calling simple_statfs(). Link: https://lore.kernel.org/r/20230919094820.g5bwharbmy2dq46w@quack3/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20231023143049.2944970-1-amir73il@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> diff ae62bcb5 Mon Oct 23 08:30:49 MDT 2023 Amir Goldstein <amir73il@gmail.com> fs: report f_fsid from s_dev for "simple" filesystems There are many "simple" filesystems (*) that report null f_fsid in statfs(2). Those "simple" filesystems report sb->s_dev as the st_dev field of the stat syscalls for all inodes of the filesystem (**). In order to enable fanotify reporting of events with fsid on those "simple" filesystems, report the sb->s_dev number in f_fsid field of statfs(2). (*) For most of the "simple" filesystem refered to in this commit, the ->statfs() operation is simple_statfs(). Some of those fs assign the simple_statfs() method directly in their ->s_op struct and some assign it indirectly via a call to simple_fill_super() or to pseudo_fs_fill_super() with either custom or "simple" s_op. We also make the same change to efivarfs and hugetlbfs, although they do not use simple_statfs(), because they use the simple_* inode opreations (e.g. simple_lookup()). (**) For most of the "simple" filesystems, the ->getattr() method is not assigned, so stat() is implemented by generic_fillattr(). A few "simple" filesystem use the simple_getattr() method which also calls generic_fillattr() to fill most of the stat struct. The two exceptions are procfs and 9p. procfs implements several different ->getattr() methods, but they all end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. 9p has more complicated ->getattr() methods, but they too, end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. Note that 9p and kernfs also call simple_statfs() from custom ->statfs() methods which already fill the f_fsid field, but v9fs_statfs() calls simple_statfs() only in case f_fsid was not filled and kenrfs_statfs() overwrites f_fsid after calling simple_statfs(). Link: https://lore.kernel.org/r/20230919094820.g5bwharbmy2dq46w@quack3/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20231023143049.2944970-1-amir73il@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 8287474a Wed Sep 13 10:28:15 MDT 2023 Al Viro <viro@zeniv.linux.org.uk> direct_write_fallback(): on error revert the ->ki_pos update from buffered write If we fail filemap_write_and_wait_range() on the range the buffered write went into, we only report the "number of bytes which we direct-written", to quote the comment in there. Which is fine, but buffered write has already advanced iocb->ki_pos, so we need to roll that back. Otherwise we end up with e.g. write(2) advancing position by more than the amount it reports having written. Fixes: 182c25e9c157 "filemap: update ki_pos in generic_perform_write" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Message-Id: <20230827214518.GU3390869@ZenIV> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 2be4f05a Tue Jul 25 12:31:04 MDT 2023 Chuck Lever <chuck.lever@oracle.com> libfs: Remove parent dentry locking in offset_iterate_dir() Since offset_iterate_dir() does not walk the parent's d_subdir list nor does it manipulate the parent's d_child, there doesn't seem to be a reason to hold the parent's d_lock. The offset_ctx's xarray can be sufficiently protected with just the RCU read lock. Flame graph data captured during the git regression run shows a 20% reduction in CPU cycles consumed in offset_find_next(). Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202307171640.e299f8d5-oliver.sang@intel.com Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Message-Id: <169030957098.157536.9938425508695693348.stgit@manet.1015granger.net> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 0d72b928 Mon Aug 07 13:38:33 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 2e41f274 Mon Sep 19 11:24:16 MDT 2022 Akinobu Mita <akinobu.mita@gmail.com> libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value Patch series "fix error when writing negative value to simple attribute files". The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), but some attribute files want to accept a negative value. This patch (of 3): The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), so we have to use a 64-bit value to write a negative value. This adds DEFINE_SIMPLE_ATTRIBUTE_SIGNED for a signed value. Link: https://lkml.kernel.org/r/20220919172418.45257-1-akinobu.mita@gmail.com Link: https://lkml.kernel.org/r/20220919172418.45257-2-akinobu.mita@gmail.com Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()") Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Zhao Gongyi <zhaogongyi@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 2e41f274 Mon Sep 19 11:24:16 MDT 2022 Akinobu Mita <akinobu.mita@gmail.com> libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value Patch series "fix error when writing negative value to simple attribute files". The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), but some attribute files want to accept a negative value. This patch (of 3): The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), so we have to use a 64-bit value to write a negative value. This adds DEFINE_SIMPLE_ATTRIBUTE_SIGNED for a signed value. Link: https://lkml.kernel.org/r/20220919172418.45257-1-akinobu.mita@gmail.com Link: https://lkml.kernel.org/r/20220919172418.45257-2-akinobu.mita@gmail.com Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()") Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Zhao Gongyi <zhaogongyi@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 5298d4bf Mon Jan 17 23:56:14 MST 2022 Christoph Hellwig <hch@lst.de> unicode: clean up the Kconfig symbol confusion Turn the CONFIG_UNICODE symbol into a tristate that generates some always built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol. Note that a lot of the IS_ENABLED() checks could be turned from cpp statements into normal ifs, but this change is intended to be fairly mechanic, so that should be cleaned up later. Fixes: 2b3d04787012 ("unicode: Add utf8-data module") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> diff 6429e463 Thu Oct 28 03:47:21 MDT 2021 Lorenz Bauer <lmb@cloudflare.com> libfs: Move shmem_exchange to simple_rename_exchange Move shmem_exchange and make it available to other callers. Suggested-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Miklos Szeredi <mszeredi@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/bpf/20211028094724.59043-2-lmb@cloudflare.com diff 59347d99 Mon Feb 15 21:29:27 MST 2021 Randy Dunlap <rdunlap@infradead.org> libfs: fix kernel-doc for mnt_userns Fix kernel-doc warning in libfs.c. ../fs/libfs.c:498: warning: Function parameter or member 'mnt_userns' not described in 'simple_setattr' Link: https://lore.kernel.org/r/20210216042929.8931-2-rdunlap@infradead.org/ Fixes: 549c7297717c ("fs: make helpers idmap mount aware") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
H A D | open.c | diff 5f0d594c Fri Feb 02 05:17:23 MST 2024 Tony Solomonik <tony.solomonik@gmail.com> Add do_ftruncate that truncates a struct file do_sys_ftruncate receives a file descriptor, fgets the struct file, and finally actually truncates the file. do_ftruncate allows for passing in a file directly, with the caller already holding a reference to it. Signed-off-by: Tony Solomonik <tony.solomonik@gmail.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20240202121724.17461-2-tony.solomonik@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> diff 83bc1d29 Mon Oct 09 09:37:10 MDT 2023 Amir Goldstein <amir73il@gmail.com> fs: get mnt_writers count for an open backing file's real path A writeable mapped backing file can perform writes to the real inode. Therefore, the real path mount must be kept writable so long as the writable map exists. This may not be strictly needed for ovelrayfs private upper mount, but it is correct to take the mnt_writers count in the vfs helper. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20231009153712.1566422-2-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org> diff 3e15dcf7 Fri Sep 08 07:28:59 MDT 2023 Amir Goldstein <amir73il@gmail.com> fs: rename __mnt_{want,drop}_write*() helpers Before exporting these helpers to modules, make their names more meaningful. The names mnt_{get,put)_write_access*() were chosen, because they rhyme with the inode {get,put)_write_access() helpers, which have a very close meaning for the inode object. Suggested-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230817-anfechtbar-ruhelosigkeit-8c6cca8443fc@brauner/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Message-Id: <20230908132900.2983519-2-amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 021a160a Tue Aug 08 11:26:35 MDT 2023 Linus Torvalds <torvalds@linux-foundation.org> fs: use __fput_sync in close(2) close(2) is a special case which guarantees a shallow kernel stack, making delegation to task_work machinery unnecessary. Said delegation is problematic as it involves atomic ops and interrupt masking trips, none of which are cheap on x86-64. Forcing close(2) to do it looks like an oversight in the original work. Moreover presence of CONFIG_RSEQ adds an additional overhead as fput() -> task_work_add(..., TWA_RESUME) -> set_notify_resume() makes the thread returning to userspace land in resume_user_mode_work(), where rseq_handle_notify_resume takes a SMAP round-trip if rseq is enabled for the thread (and it is by default with contemporary glibc). Sample result when benchmarking open1_processes -t 1 from will-it-scale (that's an open + close loop) + tmpfs on /tmp, running on the Sapphire Rapid CPU (ops/s): stock+RSEQ: 1329857 stock-RSEQ: 1421667 (+7%) patched: 1523521 (+14.5% / +7%) (with / without rseq) Patched result is the same regardless of rseq as the codepath is avoided. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 021a160a Tue Aug 08 11:26:35 MDT 2023 Linus Torvalds <torvalds@linux-foundation.org> fs: use __fput_sync in close(2) close(2) is a special case which guarantees a shallow kernel stack, making delegation to task_work machinery unnecessary. Said delegation is problematic as it involves atomic ops and interrupt masking trips, none of which are cheap on x86-64. Forcing close(2) to do it looks like an oversight in the original work. Moreover presence of CONFIG_RSEQ adds an additional overhead as fput() -> task_work_add(..., TWA_RESUME) -> set_notify_resume() makes the thread returning to userspace land in resume_user_mode_work(), where rseq_handle_notify_resume takes a SMAP round-trip if rseq is enabled for the thread (and it is by default with contemporary glibc). Sample result when benchmarking open1_processes -t 1 from will-it-scale (that's an open + close loop) + tmpfs on /tmp, running on the Sapphire Rapid CPU (ops/s): stock+RSEQ: 1329857 stock-RSEQ: 1421667 (+7%) patched: 1523521 (+14.5% / +7%) (with / without rseq) Patched result is the same regardless of rseq as the codepath is avoided. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 021a160a Tue Aug 08 11:26:35 MDT 2023 Linus Torvalds <torvalds@linux-foundation.org> fs: use __fput_sync in close(2) close(2) is a special case which guarantees a shallow kernel stack, making delegation to task_work machinery unnecessary. Said delegation is problematic as it involves atomic ops and interrupt masking trips, none of which are cheap on x86-64. Forcing close(2) to do it looks like an oversight in the original work. Moreover presence of CONFIG_RSEQ adds an additional overhead as fput() -> task_work_add(..., TWA_RESUME) -> set_notify_resume() makes the thread returning to userspace land in resume_user_mode_work(), where rseq_handle_notify_resume takes a SMAP round-trip if rseq is enabled for the thread (and it is by default with contemporary glibc). Sample result when benchmarking open1_processes -t 1 from will-it-scale (that's an open + close loop) + tmpfs on /tmp, running on the Sapphire Rapid CPU (ops/s): stock+RSEQ: 1329857 stock-RSEQ: 1421667 (+7%) patched: 1523521 (+14.5% / +7%) (with / without rseq) Patched result is the same regardless of rseq as the codepath is avoided. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5daeb41a Fri Jul 28 05:58:26 MDT 2023 Aleksa Sarai <cyphar@cyphar.com> fchmodat2: add support for AT_EMPTY_PATH This allows userspace to avoid going through /proc/self/fd when dealing with all types of file descriptors for chmod(), and makes fchmodat2() a proper superset of all other chmod syscalls. The primary difference between fchmodat2(AT_EMPTY_PATH) and fchmod() is that fchmod() doesn't operate on O_PATH file descriptors by design. To quote open(2): > O_PATH (since Linux 2.6.39) > [...] > The file itself is not opened, and other file operations (e.g., > read(2), write(2), fchmod(2), fchown(2), fgetxattr(2), ioctl(2), > mmap(2)) fail with the error EBADF. However, procfs has allowed userspace to do this operation ever since the introduction of O_PATH through magic-links, so adding this feature is only an improvement for programs that have to mess around with /proc/self/fd/$n today to get this behaviour. In addition, fchownat(AT_EMPTY_PATH) has existed since the introduction of O_PATH and allows chown() operations directly on O_PATH descriptors. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Alexey Gladkov <legion@kernel.org> Message-Id: <20230728-fchmodat2-at_empty_path-v1-1-f3add31d3516@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
H A D | attr.c | diff 16a94965 Wed Oct 04 12:52:38 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: convert core infrastructure to new timestamp accessors Convert the core vfs code to use the new timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185239.80830-2-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5d1f903f Wed Jul 12 12:58:49 MDT 2023 Christian Brauner <brauner@kernel.org> attr: block mode changes of symlinks Changing the mode of symlinks is meaningless as the vfs doesn't take the mode of a symlink into account during path lookup permission checking. However, the vfs doesn't block mode changes on symlinks. This however, has lead to an untenable mess roughly classifiable into the following two categories: (1) Filesystems that don't implement a i_op->setattr() for symlinks. Such filesystems may or may not know that without i_op->setattr() defined, notify_change() falls back to simple_setattr() causing the inode's mode in the inode cache to be changed. That's a generic issue as this will affect all non-size changing inode attributes including ownership changes. Example: afs (2) Filesystems that fail with EOPNOTSUPP but change the mode of the symlink nonetheless. Some filesystems will happily update the mode of a symlink but still return EOPNOTSUPP. This is the biggest source of confusion for userspace. The EOPNOTSUPP in this case comes from POSIX ACLs. Specifically it comes from filesystems that call posix_acl_chmod(), e.g., btrfs via if (!err && attr->ia_valid & ATTR_MODE) err = posix_acl_chmod(idmap, dentry, inode->i_mode); Filesystems including btrfs don't implement i_op->set_acl() so posix_acl_chmod() will report EOPNOTSUPP. When posix_acl_chmod() is called, most filesystems will have finished updating the inode. Perversely, this has the consequences that this behavior may depend on two kconfig options and mount options: * CONFIG_POSIX_ACL={y,n} * CONFIG_${FSTYPE}_POSIX_ACL={y,n} * Opt_acl, Opt_noacl Example: btrfs, ext4, xfs The only way to change the mode on a symlink currently involves abusing an O_PATH file descriptor in the following manner: fd = openat(-1, "/path/to/link", O_CLOEXEC | O_PATH | O_NOFOLLOW); char path[PATH_MAX]; snprintf(path, sizeof(path), "/proc/self/fd/%d", fd); chmod(path, 0000); But for most major filesystems with POSIX ACL support such as btrfs, ext4, ceph, tmpfs, xfs and others this will fail with EOPNOTSUPP with the mode still updated due to the aforementioned posix_acl_chmod() nonsense. So, given that for all major filesystems this would fail with EOPNOTSUPP and that both glibc (cf. [1]) and musl (cf. [2]) outright block mode changes on symlinks we should just try and block mode changes on symlinks directly in the vfs and have a clean break with this nonsense. If this causes any regressions, we do the next best thing and fix up all filesystems that do return EOPNOTSUPP with the mode updated to not call posix_acl_chmod() on symlinks. But as usual, let's try the clean cut solution first. It's a simple patch that can be easily reverted. Not marking this for backport as I'll do that manually if we're reasonably sure that this works and there are no strong objections. We could block this in chmod_common() but it's more appropriate to do it notify_change() as it will also mean that we catch filesystems that change symlink permissions explicitly or accidently. Similar proposals were floated in the past as in [3] and [4] and again recently in [5]. There's also a couple of bugs about this inconsistency as in [6] and [7]. Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=99527a3727e44cb8661ee1f743068f108ec93979;hb=HEAD [1] Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c [2] Link: https://lore.kernel.org/all/20200911065733.GA31579@infradead.org [3] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00518.html [4] Link: https://lore.kernel.org/lkml/87lefmbppo.fsf@oldenburg.str.redhat.com [5] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00467.html [6] Link: https://sourceware.org/bugzilla/show_bug.cgi?id=14578#c17 [7] Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # please backport to all LTSes but not before v6.6-rc2 is tagged Suggested-by: Christoph Hellwig <hch@lst.de> Suggested-by: Florian Weimer <fweimer@redhat.com> Message-Id: <20230712-vfs-chmod-symlinks-v2-1-08cfb92b61dd@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5d1f903f Wed Jul 12 12:58:49 MDT 2023 Christian Brauner <brauner@kernel.org> attr: block mode changes of symlinks Changing the mode of symlinks is meaningless as the vfs doesn't take the mode of a symlink into account during path lookup permission checking. However, the vfs doesn't block mode changes on symlinks. This however, has lead to an untenable mess roughly classifiable into the following two categories: (1) Filesystems that don't implement a i_op->setattr() for symlinks. Such filesystems may or may not know that without i_op->setattr() defined, notify_change() falls back to simple_setattr() causing the inode's mode in the inode cache to be changed. That's a generic issue as this will affect all non-size changing inode attributes including ownership changes. Example: afs (2) Filesystems that fail with EOPNOTSUPP but change the mode of the symlink nonetheless. Some filesystems will happily update the mode of a symlink but still return EOPNOTSUPP. This is the biggest source of confusion for userspace. The EOPNOTSUPP in this case comes from POSIX ACLs. Specifically it comes from filesystems that call posix_acl_chmod(), e.g., btrfs via if (!err && attr->ia_valid & ATTR_MODE) err = posix_acl_chmod(idmap, dentry, inode->i_mode); Filesystems including btrfs don't implement i_op->set_acl() so posix_acl_chmod() will report EOPNOTSUPP. When posix_acl_chmod() is called, most filesystems will have finished updating the inode. Perversely, this has the consequences that this behavior may depend on two kconfig options and mount options: * CONFIG_POSIX_ACL={y,n} * CONFIG_${FSTYPE}_POSIX_ACL={y,n} * Opt_acl, Opt_noacl Example: btrfs, ext4, xfs The only way to change the mode on a symlink currently involves abusing an O_PATH file descriptor in the following manner: fd = openat(-1, "/path/to/link", O_CLOEXEC | O_PATH | O_NOFOLLOW); char path[PATH_MAX]; snprintf(path, sizeof(path), "/proc/self/fd/%d", fd); chmod(path, 0000); But for most major filesystems with POSIX ACL support such as btrfs, ext4, ceph, tmpfs, xfs and others this will fail with EOPNOTSUPP with the mode still updated due to the aforementioned posix_acl_chmod() nonsense. So, given that for all major filesystems this would fail with EOPNOTSUPP and that both glibc (cf. [1]) and musl (cf. [2]) outright block mode changes on symlinks we should just try and block mode changes on symlinks directly in the vfs and have a clean break with this nonsense. If this causes any regressions, we do the next best thing and fix up all filesystems that do return EOPNOTSUPP with the mode updated to not call posix_acl_chmod() on symlinks. But as usual, let's try the clean cut solution first. It's a simple patch that can be easily reverted. Not marking this for backport as I'll do that manually if we're reasonably sure that this works and there are no strong objections. We could block this in chmod_common() but it's more appropriate to do it notify_change() as it will also mean that we catch filesystems that change symlink permissions explicitly or accidently. Similar proposals were floated in the past as in [3] and [4] and again recently in [5]. There's also a couple of bugs about this inconsistency as in [6] and [7]. Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=99527a3727e44cb8661ee1f743068f108ec93979;hb=HEAD [1] Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c [2] Link: https://lore.kernel.org/all/20200911065733.GA31579@infradead.org [3] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00518.html [4] Link: https://lore.kernel.org/lkml/87lefmbppo.fsf@oldenburg.str.redhat.com [5] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00467.html [6] Link: https://sourceware.org/bugzilla/show_bug.cgi?id=14578#c17 [7] Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # please backport to all LTSes but not before v6.6-rc2 is tagged Suggested-by: Christoph Hellwig <hch@lst.de> Suggested-by: Florian Weimer <fweimer@redhat.com> Message-Id: <20230712-vfs-chmod-symlinks-v2-1-08cfb92b61dd@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 5d1f903f Wed Jul 12 12:58:49 MDT 2023 Christian Brauner <brauner@kernel.org> attr: block mode changes of symlinks Changing the mode of symlinks is meaningless as the vfs doesn't take the mode of a symlink into account during path lookup permission checking. However, the vfs doesn't block mode changes on symlinks. This however, has lead to an untenable mess roughly classifiable into the following two categories: (1) Filesystems that don't implement a i_op->setattr() for symlinks. Such filesystems may or may not know that without i_op->setattr() defined, notify_change() falls back to simple_setattr() causing the inode's mode in the inode cache to be changed. That's a generic issue as this will affect all non-size changing inode attributes including ownership changes. Example: afs (2) Filesystems that fail with EOPNOTSUPP but change the mode of the symlink nonetheless. Some filesystems will happily update the mode of a symlink but still return EOPNOTSUPP. This is the biggest source of confusion for userspace. The EOPNOTSUPP in this case comes from POSIX ACLs. Specifically it comes from filesystems that call posix_acl_chmod(), e.g., btrfs via if (!err && attr->ia_valid & ATTR_MODE) err = posix_acl_chmod(idmap, dentry, inode->i_mode); Filesystems including btrfs don't implement i_op->set_acl() so posix_acl_chmod() will report EOPNOTSUPP. When posix_acl_chmod() is called, most filesystems will have finished updating the inode. Perversely, this has the consequences that this behavior may depend on two kconfig options and mount options: * CONFIG_POSIX_ACL={y,n} * CONFIG_${FSTYPE}_POSIX_ACL={y,n} * Opt_acl, Opt_noacl Example: btrfs, ext4, xfs The only way to change the mode on a symlink currently involves abusing an O_PATH file descriptor in the following manner: fd = openat(-1, "/path/to/link", O_CLOEXEC | O_PATH | O_NOFOLLOW); char path[PATH_MAX]; snprintf(path, sizeof(path), "/proc/self/fd/%d", fd); chmod(path, 0000); But for most major filesystems with POSIX ACL support such as btrfs, ext4, ceph, tmpfs, xfs and others this will fail with EOPNOTSUPP with the mode still updated due to the aforementioned posix_acl_chmod() nonsense. So, given that for all major filesystems this would fail with EOPNOTSUPP and that both glibc (cf. [1]) and musl (cf. [2]) outright block mode changes on symlinks we should just try and block mode changes on symlinks directly in the vfs and have a clean break with this nonsense. If this causes any regressions, we do the next best thing and fix up all filesystems that do return EOPNOTSUPP with the mode updated to not call posix_acl_chmod() on symlinks. But as usual, let's try the clean cut solution first. It's a simple patch that can be easily reverted. Not marking this for backport as I'll do that manually if we're reasonably sure that this works and there are no strong objections. We could block this in chmod_common() but it's more appropriate to do it notify_change() as it will also mean that we catch filesystems that change symlink permissions explicitly or accidently. Similar proposals were floated in the past as in [3] and [4] and again recently in [5]. There's also a couple of bugs about this inconsistency as in [6] and [7]. Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=99527a3727e44cb8661ee1f743068f108ec93979;hb=HEAD [1] Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c [2] Link: https://lore.kernel.org/all/20200911065733.GA31579@infradead.org [3] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00518.html [4] Link: https://lore.kernel.org/lkml/87lefmbppo.fsf@oldenburg.str.redhat.com [5] Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00467.html [6] Link: https://sourceware.org/bugzilla/show_bug.cgi?id=14578#c17 [7] Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # please backport to all LTSes but not before v6.6-rc2 is tagged Suggested-by: Christoph Hellwig <hch@lst.de> Suggested-by: Florian Weimer <fweimer@redhat.com> Message-Id: <20230712-vfs-chmod-symlinks-v2-1-08cfb92b61dd@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 4f704d9a Mon Mar 13 17:51:10 MDT 2023 Christian Brauner <brauner@kernel.org> nfs: use vfs setgid helper We've aligned setgid behavior over multiple kernel releases. The details can be found in the following two merge messages: cf619f891971 ("Merge tag 'fs.ovl.setgid.v6.2') 426b4ca2d6a5 ("Merge tag 'fs.setgid.v6.0') Consistent setgid stripping behavior is now encapsulated in the setattr_should_drop_sgid() helper which is used by all filesystems that strip setgid bits outside of vfs proper. Switch nfs to rely on this helper as well. Without this patch the setgid stripping tests in xfstests will fail. Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Message-Id: <20230313-fs-nfs-setgid-v2-1-9a59f436cfc0@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff e2ebff9c Mon Aug 08 02:52:35 MDT 2022 David Howells <dhowells@redhat.com> vfs: Check the truncate maximum size in inode_newsize_ok() If something manages to set the maximum file size to MAX_OFFSET+1, this can cause the xfs and ext4 filesystems at least to become corrupt. Ordinarily, the kernel protects against userspace trying this by checking the value early in the truncate() and ftruncate() system calls calls - but there are at least two places that this check is bypassed: (1) Cachefiles will round up the EOF of the backing file to DIO block size so as to allow DIO on the final block - but this might push the offset negative. It then calls notify_change(), but this inadvertently bypasses the checking. This can be triggered if someone puts an 8EiB-1 file on a server for someone else to try and access by, say, nfs. (2) ksmbd doesn't check the value it is given in set_end_of_file_info() and then calls vfs_truncate() directly - which also bypasses the check. In both cases, it is potentially possible for a network filesystem to cause a disk filesystem to be corrupted: cachefiles in the client's cache filesystem; ksmbd in the server's filesystem. nfsd is okay as it checks the value, but we can then remove this check too. Fix this by adding a check to inode_newsize_ok(), as called from setattr_prepare(), thereby catching the issue as filesystems set up to perform the truncate with minimal opportunity for bypassing the new check. Fixes: 1f08c925e7a3 ("cachefiles: Implement backing file wrangling") Fixes: f44158485826 ("cifsd: add file operations") Signed-off-by: David Howells <dhowells@redhat.com> Reported-by: Jeff Layton <jlayton@kernel.org> Tested-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Cc: stable@kernel.org Acked-by: Alexander Viro <viro@zeniv.linux.org.uk> cc: Steve French <sfrench@samba.org> cc: Hyunchul Lee <hyc.lee@gmail.com> cc: Chuck Lever <chuck.lever@oracle.com> cc: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 168f9128 Mon Jun 13 05:15:17 MDT 2022 Christian Brauner <brauner@kernel.org> fs: account for group membership When calling setattr_prepare() to determine the validity of the attributes the ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id. This is exactly the same for idmapped and non-idmapped mounts and allows callers to pass in the values they want to see written to inode->i_{g,u}id. When group ownership is changed a caller whose fsuid owns the inode can change the group of the inode to any group they are a member of. When searching through the caller's groups we need to use the gid mapped according to the idmapped mount otherwise we will fail to change ownership for unprivileged users. Consider a caller running with fsuid and fsgid 1000 using an idmapped mount that maps id 65534 to 1000 and 65535 to 1001. Consequently, a file owned by 65534:65535 in the filesystem will be owned by 1000:1001 in the idmapped mount. The caller now requests the gid of the file to be changed to 1000 going through the idmapped mount. In the vfs we will immediately map the requested gid to the value that will need to be written to inode->i_gid and place it in attr->ia_gid. Since this idmapped mount maps 65534 to 1000 we place 65534 in attr->ia_gid. When we check whether the caller is allowed to change group ownership we first validate that their fsuid matches the inode's uid. The inode->i_uid is 65534 which is mapped to uid 1000 in the idmapped mount. Since the caller's fsuid is 1000 we pass the check. We now check whether the caller is allowed to change inode->i_gid to the requested gid by calling in_group_p(). This will compare the passed in gid to the caller's fsgid and search the caller's additional groups. Since we're dealing with an idmapped mount we need to pass in the gid mapped according to the idmapped mount. This is akin to checking whether a caller is privileged over the future group the inode is owned by. And that needs to take the idmapped mount into account. Note, all helpers are nops without idmapped mounts. New regression test sent to xfstests. Link: https://github.com/lxc/lxd/issues/10537 Link: https://lore.kernel.org/r/20220613111517.2186646-1-brauner@kernel.org Fixes: 2f221d6f7b88 ("attr: handle idmapped mounts") Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org # 5.15+ CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> diff 96821970 Tue Nov 09 07:57:12 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> fs: handle circular mappings correctly When calling setattr_prepare() to determine the validity of the attributes the ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id. When the {g,u}id attribute of the file isn't altered and the caller's fs{g,u}id matches the current {g,u}id attribute the attribute change is allowed. The value in ia_{g,u}id does already account for idmapped mounts and will have taken the relevant idmapping into account. So in order to verify that the {g,u}id attribute isn't changed we simple need to compare the ia_{g,u}id value against the inode's i_{g,u}id value. This only has any meaning for idmapped mounts as idmapping helpers are idempotent without them. And for idmapped mounts this really only has a meaning when circular idmappings are used, i.e. mappings where e.g. id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such ciruclar mappings can e.g. be useful when sharing the same home directory between multiple users at the same time. As an example consider a directory with two files: /source/file1 owned by {g,u}id 1000 and /source/file2 owned by {g,u}id 1001. Assume we create an idmapped mount at /target with an idmapping that maps files owned by {g,u}id 1000 to being owned by {g,u}id 1001 and files owned by {g,u}id 1001 to being owned by {g,u}id 1000. In effect, the idmapped mount at /target switches the ownership of /source/file1 and source/file2, i.e. /target/file1 will be owned by {g,u}id 1001 and /target/file2 will be owned by {g,u}id 1000. This means that a user with fs{g,u}id 1000 must be allowed to setattr /target/file2 from {g,u}id 1000 to {g,u}id 1000. Similar, a user with fs{g,u}id 1001 must be allowed to setattr /target/file1 from {g,u}id 1001 to {g,u}id 1001. Conversely, a user with fs{g,u}id 1000 must fail to setattr /target/file1 from {g,u}id 1001 to {g,u}id 1000. And a user with fs{g,u}id 1001 must fail to setattr /target/file2 from {g,u}id 1000 to {g,u}id 1000. Both cases must fail with EPERM for non-capable callers. Before this patch we could end up denying legitimate attribute changes and allowing invalid attribute changes when circular mappings are used. To even get into this situation the caller must've been privileged both to create that mapping and to create that idmapped mount. This hasn't been seen in the wild anywhere but came up when expanding the testsuite during work on a series of hardening patches. All idmapped fstests pass without any regressions and we add new tests to verify the behavior of circular mappings. Link: https://lore.kernel.org/r/20211109145713.1868404-1-brauner@kernel.org Fixes: 2f221d6f7b88 ("attr: handle idmapped mounts") Cc: Seth Forshee <seth.forshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org CC: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
/linux-master/fs/ext4/ | ||
H A D | inode.c | diff 3fcc2b88 Fri Jan 26 18:58:00 MST 2024 Zhang Yi <yi.zhang@huawei.com> ext4: refactor ext4_da_map_blocks() Refactor and cleanup ext4_da_map_blocks(), reduce some unnecessary parameters and branches, no logic changes. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240127015825.1608160-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 2ffd2a6a Fri Jan 05 02:21:01 MST 2024 Kemeng Shi <shikemeng@huaweicloud.com> ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations The "needed" controls the number of ext4_prealloc_space to discard in ext4_discard_preallocations. Function ext4_discard_preallocations is supposed to discard all non-used preallocated blocks when "needed" is 0 and now ext4_discard_preallocations is always called with "needed" = 0. Remove unnecessary parameter "needed" and remove all non-used preallocated spaces in ext4_discard_preallocations to simplify the code. Note: If count of non-used preallocated spaces could be more than UINT_MAX, there was a memory leak as some non-used preallocated spaces are left ununsed and this commit will fix it. Otherwise, there is no behavior change. Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240105092102.496631-9-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 2cd8bdb5 Mon Sep 18 04:45:50 MDT 2023 Ojaswin Mujoo <ojaswin@linux.ibm.com> ext4: mark buffer new if it is unwritten to avoid stale data exposure ** Short Version ** In ext4 with dioread_nolock, we could have a scenario where the bh returned by get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we never zero out the range of bh that is not under write, causing whatever stale data is present in the folio at that time to be written out to disk. To fix this mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten(). ** Long Version ** The issue mentioned above was resulting in two different bugs: 1. On block size < page size case in ext4, generic/269 was reliably failing with dioread_nolock. The state of the write was as follows: * The write was extending i_size. * The last block of the file was fallocated and had an unwritten extent * We were near ENOSPC and hence we were switching to non-delayed alloc allocation. In this case, the back trace that triggers the bug is as follows: ext4_da_write_begin() /* switch to nodelalloc due to low space */ ext4_write_begin() ext4_should_dioread_nolock() // true since mount flags still have delalloc __block_write_begin(..., ext4_get_block_unwritten) __block_write_begin_int() for(each buffer head in page) { /* first iteration, this is bh1 which contains i_size */ if (!buffer_mapped) get_block() /* returns bh with only UNWRITTEN and MAPPED */ /* second iteration, bh2 */ if (!buffer_mapped) get_block() /* we fail here, could be ENOSPC */ } if (err) /* * this would zero out all new buffers and mark them uptodate. * Since bh1 was never marked new, we skip it here which causes * the bug later. */ folio_zero_new_buffers(); /* ext4_wrte_begin() error handling */ ext4_truncate_failed_write() ext4_truncate() ext4_block_truncate_page() __ext4_block_zero_page_range() if(!buffer_uptodate()) ext4_read_bh_lock() ext4_read_bh() -> ... ext4_submit_bh_wbc() BUG_ON(buffer_unwritten(bh)); /* !!! */ 2. The second issue is stale data exposure with page size >= blocksize with dioread_nolock. The conditions needed for it to happen are same as the previous issue ie dioread_nolock around ENOSPC condition. The issue is also similar where in __block_write_begin_int() when we call ext4_get_block_unwritten() on the buffer_head and the underlying extent is unwritten, we get an unwritten and mapped buffer head. Since it is not new, we never zero out the partial range which is not under write, thus writing stale data to disk. This can be easily observed with the following reproducer: fallocate -l 4k testfile xfs_io -c "pwrite 2k 2k" testfile # hexdump output will have stale data in from byte 0 to 2k in testfile hexdump -C testfile NOTE: To trigger this, we need dioread_nolock enabled and write happening via ext4_write_begin(), which is usually used when we have -o nodealloc. Since dioread_nolock is disabled with nodelalloc, the only alternate way to call ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when ext4 is almost full like the way generic/269 was triggering it in Issue 1 above. This might make the issue harder to hit. Hence, for reliable replication, I used the below patch to temporarily allow dioread_nolock with nodelalloc and then mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale data issue 100% of times: @@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) if (ext4_should_journal_data(inode)) return 0; /* temporary fix to prevent generic/422 test failures */ - if (!test_opt(inode->i_sb, DELALLOC)) - return 0; + // if (!test_opt(inode->i_sb, DELALLOC)) + // return 0; return 1; } After applying this patch to mark buffer as NEW, both the above issues are fixed. Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 2cd8bdb5 Mon Sep 18 04:45:50 MDT 2023 Ojaswin Mujoo <ojaswin@linux.ibm.com> ext4: mark buffer new if it is unwritten to avoid stale data exposure ** Short Version ** In ext4 with dioread_nolock, we could have a scenario where the bh returned by get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we never zero out the range of bh that is not under write, causing whatever stale data is present in the folio at that time to be written out to disk. To fix this mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten(). ** Long Version ** The issue mentioned above was resulting in two different bugs: 1. On block size < page size case in ext4, generic/269 was reliably failing with dioread_nolock. The state of the write was as follows: * The write was extending i_size. * The last block of the file was fallocated and had an unwritten extent * We were near ENOSPC and hence we were switching to non-delayed alloc allocation. In this case, the back trace that triggers the bug is as follows: ext4_da_write_begin() /* switch to nodelalloc due to low space */ ext4_write_begin() ext4_should_dioread_nolock() // true since mount flags still have delalloc __block_write_begin(..., ext4_get_block_unwritten) __block_write_begin_int() for(each buffer head in page) { /* first iteration, this is bh1 which contains i_size */ if (!buffer_mapped) get_block() /* returns bh with only UNWRITTEN and MAPPED */ /* second iteration, bh2 */ if (!buffer_mapped) get_block() /* we fail here, could be ENOSPC */ } if (err) /* * this would zero out all new buffers and mark them uptodate. * Since bh1 was never marked new, we skip it here which causes * the bug later. */ folio_zero_new_buffers(); /* ext4_wrte_begin() error handling */ ext4_truncate_failed_write() ext4_truncate() ext4_block_truncate_page() __ext4_block_zero_page_range() if(!buffer_uptodate()) ext4_read_bh_lock() ext4_read_bh() -> ... ext4_submit_bh_wbc() BUG_ON(buffer_unwritten(bh)); /* !!! */ 2. The second issue is stale data exposure with page size >= blocksize with dioread_nolock. The conditions needed for it to happen are same as the previous issue ie dioread_nolock around ENOSPC condition. The issue is also similar where in __block_write_begin_int() when we call ext4_get_block_unwritten() on the buffer_head and the underlying extent is unwritten, we get an unwritten and mapped buffer head. Since it is not new, we never zero out the partial range which is not under write, thus writing stale data to disk. This can be easily observed with the following reproducer: fallocate -l 4k testfile xfs_io -c "pwrite 2k 2k" testfile # hexdump output will have stale data in from byte 0 to 2k in testfile hexdump -C testfile NOTE: To trigger this, we need dioread_nolock enabled and write happening via ext4_write_begin(), which is usually used when we have -o nodealloc. Since dioread_nolock is disabled with nodelalloc, the only alternate way to call ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when ext4 is almost full like the way generic/269 was triggering it in Issue 1 above. This might make the issue harder to hit. Hence, for reliable replication, I used the below patch to temporarily allow dioread_nolock with nodelalloc and then mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale data issue 100% of times: @@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) if (ext4_should_journal_data(inode)) return 0; /* temporary fix to prevent generic/422 test failures */ - if (!test_opt(inode->i_sb, DELALLOC)) - return 0; + // if (!test_opt(inode->i_sb, DELALLOC)) + // return 0; return 1; } After applying this patch to mark buffer as NEW, both the above issues are fixed. Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 2cd8bdb5 Mon Sep 18 04:45:50 MDT 2023 Ojaswin Mujoo <ojaswin@linux.ibm.com> ext4: mark buffer new if it is unwritten to avoid stale data exposure ** Short Version ** In ext4 with dioread_nolock, we could have a scenario where the bh returned by get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we never zero out the range of bh that is not under write, causing whatever stale data is present in the folio at that time to be written out to disk. To fix this mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten(). ** Long Version ** The issue mentioned above was resulting in two different bugs: 1. On block size < page size case in ext4, generic/269 was reliably failing with dioread_nolock. The state of the write was as follows: * The write was extending i_size. * The last block of the file was fallocated and had an unwritten extent * We were near ENOSPC and hence we were switching to non-delayed alloc allocation. In this case, the back trace that triggers the bug is as follows: ext4_da_write_begin() /* switch to nodelalloc due to low space */ ext4_write_begin() ext4_should_dioread_nolock() // true since mount flags still have delalloc __block_write_begin(..., ext4_get_block_unwritten) __block_write_begin_int() for(each buffer head in page) { /* first iteration, this is bh1 which contains i_size */ if (!buffer_mapped) get_block() /* returns bh with only UNWRITTEN and MAPPED */ /* second iteration, bh2 */ if (!buffer_mapped) get_block() /* we fail here, could be ENOSPC */ } if (err) /* * this would zero out all new buffers and mark them uptodate. * Since bh1 was never marked new, we skip it here which causes * the bug later. */ folio_zero_new_buffers(); /* ext4_wrte_begin() error handling */ ext4_truncate_failed_write() ext4_truncate() ext4_block_truncate_page() __ext4_block_zero_page_range() if(!buffer_uptodate()) ext4_read_bh_lock() ext4_read_bh() -> ... ext4_submit_bh_wbc() BUG_ON(buffer_unwritten(bh)); /* !!! */ 2. The second issue is stale data exposure with page size >= blocksize with dioread_nolock. The conditions needed for it to happen are same as the previous issue ie dioread_nolock around ENOSPC condition. The issue is also similar where in __block_write_begin_int() when we call ext4_get_block_unwritten() on the buffer_head and the underlying extent is unwritten, we get an unwritten and mapped buffer head. Since it is not new, we never zero out the partial range which is not under write, thus writing stale data to disk. This can be easily observed with the following reproducer: fallocate -l 4k testfile xfs_io -c "pwrite 2k 2k" testfile # hexdump output will have stale data in from byte 0 to 2k in testfile hexdump -C testfile NOTE: To trigger this, we need dioread_nolock enabled and write happening via ext4_write_begin(), which is usually used when we have -o nodealloc. Since dioread_nolock is disabled with nodelalloc, the only alternate way to call ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when ext4 is almost full like the way generic/269 was triggering it in Issue 1 above. This might make the issue harder to hit. Hence, for reliable replication, I used the below patch to temporarily allow dioread_nolock with nodelalloc and then mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale data issue 100% of times: @@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) if (ext4_should_journal_data(inode)) return 0; /* temporary fix to prevent generic/422 test failures */ - if (!test_opt(inode->i_sb, DELALLOC)) - return 0; + // if (!test_opt(inode->i_sb, DELALLOC)) + // return 0; return 1; } After applying this patch to mark buffer as NEW, both the above issues are fixed. Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 2cd8bdb5 Mon Sep 18 04:45:50 MDT 2023 Ojaswin Mujoo <ojaswin@linux.ibm.com> ext4: mark buffer new if it is unwritten to avoid stale data exposure ** Short Version ** In ext4 with dioread_nolock, we could have a scenario where the bh returned by get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we never zero out the range of bh that is not under write, causing whatever stale data is present in the folio at that time to be written out to disk. To fix this mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten(). ** Long Version ** The issue mentioned above was resulting in two different bugs: 1. On block size < page size case in ext4, generic/269 was reliably failing with dioread_nolock. The state of the write was as follows: * The write was extending i_size. * The last block of the file was fallocated and had an unwritten extent * We were near ENOSPC and hence we were switching to non-delayed alloc allocation. In this case, the back trace that triggers the bug is as follows: ext4_da_write_begin() /* switch to nodelalloc due to low space */ ext4_write_begin() ext4_should_dioread_nolock() // true since mount flags still have delalloc __block_write_begin(..., ext4_get_block_unwritten) __block_write_begin_int() for(each buffer head in page) { /* first iteration, this is bh1 which contains i_size */ if (!buffer_mapped) get_block() /* returns bh with only UNWRITTEN and MAPPED */ /* second iteration, bh2 */ if (!buffer_mapped) get_block() /* we fail here, could be ENOSPC */ } if (err) /* * this would zero out all new buffers and mark them uptodate. * Since bh1 was never marked new, we skip it here which causes * the bug later. */ folio_zero_new_buffers(); /* ext4_wrte_begin() error handling */ ext4_truncate_failed_write() ext4_truncate() ext4_block_truncate_page() __ext4_block_zero_page_range() if(!buffer_uptodate()) ext4_read_bh_lock() ext4_read_bh() -> ... ext4_submit_bh_wbc() BUG_ON(buffer_unwritten(bh)); /* !!! */ 2. The second issue is stale data exposure with page size >= blocksize with dioread_nolock. The conditions needed for it to happen are same as the previous issue ie dioread_nolock around ENOSPC condition. The issue is also similar where in __block_write_begin_int() when we call ext4_get_block_unwritten() on the buffer_head and the underlying extent is unwritten, we get an unwritten and mapped buffer head. Since it is not new, we never zero out the partial range which is not under write, thus writing stale data to disk. This can be easily observed with the following reproducer: fallocate -l 4k testfile xfs_io -c "pwrite 2k 2k" testfile # hexdump output will have stale data in from byte 0 to 2k in testfile hexdump -C testfile NOTE: To trigger this, we need dioread_nolock enabled and write happening via ext4_write_begin(), which is usually used when we have -o nodealloc. Since dioread_nolock is disabled with nodelalloc, the only alternate way to call ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when ext4 is almost full like the way generic/269 was triggering it in Issue 1 above. This might make the issue harder to hit. Hence, for reliable replication, I used the below patch to temporarily allow dioread_nolock with nodelalloc and then mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale data issue 100% of times: @@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) if (ext4_should_journal_data(inode)) return 0; /* temporary fix to prevent generic/422 test failures */ - if (!test_opt(inode->i_sb, DELALLOC)) - return 0; + // if (!test_opt(inode->i_sb, DELALLOC)) + // return 0; return 1; } After applying this patch to mark buffer as NEW, both the above issues are fixed. Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 2cd8bdb5 Mon Sep 18 04:45:50 MDT 2023 Ojaswin Mujoo <ojaswin@linux.ibm.com> ext4: mark buffer new if it is unwritten to avoid stale data exposure ** Short Version ** In ext4 with dioread_nolock, we could have a scenario where the bh returned by get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we never zero out the range of bh that is not under write, causing whatever stale data is present in the folio at that time to be written out to disk. To fix this mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten(). ** Long Version ** The issue mentioned above was resulting in two different bugs: 1. On block size < page size case in ext4, generic/269 was reliably failing with dioread_nolock. The state of the write was as follows: * The write was extending i_size. * The last block of the file was fallocated and had an unwritten extent * We were near ENOSPC and hence we were switching to non-delayed alloc allocation. In this case, the back trace that triggers the bug is as follows: ext4_da_write_begin() /* switch to nodelalloc due to low space */ ext4_write_begin() ext4_should_dioread_nolock() // true since mount flags still have delalloc __block_write_begin(..., ext4_get_block_unwritten) __block_write_begin_int() for(each buffer head in page) { /* first iteration, this is bh1 which contains i_size */ if (!buffer_mapped) get_block() /* returns bh with only UNWRITTEN and MAPPED */ /* second iteration, bh2 */ if (!buffer_mapped) get_block() /* we fail here, could be ENOSPC */ } if (err) /* * this would zero out all new buffers and mark them uptodate. * Since bh1 was never marked new, we skip it here which causes * the bug later. */ folio_zero_new_buffers(); /* ext4_wrte_begin() error handling */ ext4_truncate_failed_write() ext4_truncate() ext4_block_truncate_page() __ext4_block_zero_page_range() if(!buffer_uptodate()) ext4_read_bh_lock() ext4_read_bh() -> ... ext4_submit_bh_wbc() BUG_ON(buffer_unwritten(bh)); /* !!! */ 2. The second issue is stale data exposure with page size >= blocksize with dioread_nolock. The conditions needed for it to happen are same as the previous issue ie dioread_nolock around ENOSPC condition. The issue is also similar where in __block_write_begin_int() when we call ext4_get_block_unwritten() on the buffer_head and the underlying extent is unwritten, we get an unwritten and mapped buffer head. Since it is not new, we never zero out the partial range which is not under write, thus writing stale data to disk. This can be easily observed with the following reproducer: fallocate -l 4k testfile xfs_io -c "pwrite 2k 2k" testfile # hexdump output will have stale data in from byte 0 to 2k in testfile hexdump -C testfile NOTE: To trigger this, we need dioread_nolock enabled and write happening via ext4_write_begin(), which is usually used when we have -o nodealloc. Since dioread_nolock is disabled with nodelalloc, the only alternate way to call ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when ext4 is almost full like the way generic/269 was triggering it in Issue 1 above. This might make the issue harder to hit. Hence, for reliable replication, I used the below patch to temporarily allow dioread_nolock with nodelalloc and then mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale data issue 100% of times: @@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) if (ext4_should_journal_data(inode)) return 0; /* temporary fix to prevent generic/422 test failures */ - if (!test_opt(inode->i_sb, DELALLOC)) - return 0; + // if (!test_opt(inode->i_sb, DELALLOC)) + // return 0; return 1; } After applying this patch to mark buffer as NEW, both the above issues are fixed. Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 8216776c Mon Aug 14 12:29:01 MDT 2023 Eric Biggers <ebiggers@google.com> ext4: reject casefold inode flag without casefold feature It is invalid for the casefold inode flag to be set without the casefold superblock feature flag also being set. e2fsck already considers this case to be invalid and handles it by offering to clear the casefold flag on the inode. __ext4_iget() also already considered this to be invalid, sort of, but it only got so far as logging an error message; it didn't actually reject the inode. Make it reject the inode so that other code doesn't have to handle this case. This matches what f2fs does. Note: we could check 's_encoding != NULL' instead of ext4_has_feature_casefold(). This would make the check robust against the casefold feature being enabled by userspace writing to the page cache of the mounted block device. However, it's unsolvable in general for filesystems to be robust against concurrent writes to the page cache of the mounted block device. Though this very particular scenario involving the casefold feature is solvable, we should not pretend that we can support this model, so let's just check the casefold feature. tune2fs already forbids enabling casefold on a mounted filesystem. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230814182903.37267-2-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 03de20be Thu Aug 10 09:43:33 MDT 2023 Liu Song <liusong@linux.alibaba.com> ext4: do not mark inode dirty every time when appending using delalloc In the delalloc append write scenario, if inode's i_size is extended due to buffer write, there are delalloc writes pending in the range up to i_size, and no need to touch i_disksize since writeback will push i_disksize up to i_size eventually. Offers significant performance improvement in high-frequency append write scenarios. I conducted tests in my 32-core environment by launching 32 concurrent threads to append write to the same file. Each write operation had a length of 1024 bytes and was repeated 100000 times. Without using this patch, the test was completed in 7705 ms. However, with this patch, the test was completed in 5066 ms, resulting in a performance improvement of 34%. Moreover, in test scenarios of Kafka version 2.6.2, using packet size of 2K, with this patch resulted in a 10% performance improvement. Signed-off-by: Liu Song <liusong@linux.alibaba.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230810154333.84921-1-liusong@linux.alibaba.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> diff 03de20be Thu Aug 10 09:43:33 MDT 2023 Liu Song <liusong@linux.alibaba.com> ext4: do not mark inode dirty every time when appending using delalloc In the delalloc append write scenario, if inode's i_size is extended due to buffer write, there are delalloc writes pending in the range up to i_size, and no need to touch i_disksize since writeback will push i_disksize up to i_size eventually. Offers significant performance improvement in high-frequency append write scenarios. I conducted tests in my 32-core environment by launching 32 concurrent threads to append write to the same file. Each write operation had a length of 1024 bytes and was repeated 100000 times. Without using this patch, the test was completed in 7705 ms. However, with this patch, the test was completed in 5066 ms, resulting in a performance improvement of 34%. Moreover, in test scenarios of Kafka version 2.6.2, using packet size of 2K, with this patch resulted in a 10% performance improvement. Signed-off-by: Liu Song <liusong@linux.alibaba.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230810154333.84921-1-liusong@linux.alibaba.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
/linux-master/fs/xfs/ | ||
H A D | xfs_iops.c | diff e014f37d Tue Mar 08 11:51:16 MST 2022 Darrick J. Wong <djwong@kernel.org> xfs: use setattr_copy to set vfs inode attributes Filipe Manana pointed out that XFS' behavior w.r.t. setuid/setgid revocation isn't consistent with btrfs[1] or ext4. Those two filesystems use the VFS function setattr_copy to convey certain attributes from struct iattr into the VFS inode structure. Andrey Zhadchenko reported[2] that XFS uses the wrong user namespace to decide if it should clear setgid and setuid on a file attribute update. This is a second symptom of the problem that Filipe noticed. XFS, on the other hand, open-codes setattr_copy in xfs_setattr_mode, xfs_setattr_nonsize, and xfs_setattr_time. Regrettably, setattr_copy is /not/ a simple copy function; it contains additional logic to clear the setgid bit when setting the mode, and XFS' version no longer matches. The VFS implements its own setuid/setgid stripping logic, which establishes consistent behavior. It's a tad unfortunate that it's scattered across notify_change, should_remove_suid, and setattr_copy but XFS should really follow the Linux VFS. Adapt XFS to use the VFS functions and get rid of the old functions. [1] https://lore.kernel.org/fstests/CAL3q7H47iNQ=Wmk83WcGB-KBJVOEtR9+qGczzCeXJ9Y2KCV25Q@mail.gmail.com/ [2] https://lore.kernel.org/linux-xfs/20220221182218.748084-1-andrey.zhadchenko@virtuozzo.com/ Fixes: 7fa294c8991c ("userns: Allow chown and setgid preservation") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> diff e014f37d Tue Mar 08 11:51:16 MST 2022 Darrick J. Wong <djwong@kernel.org> xfs: use setattr_copy to set vfs inode attributes Filipe Manana pointed out that XFS' behavior w.r.t. setuid/setgid revocation isn't consistent with btrfs[1] or ext4. Those two filesystems use the VFS function setattr_copy to convey certain attributes from struct iattr into the VFS inode structure. Andrey Zhadchenko reported[2] that XFS uses the wrong user namespace to decide if it should clear setgid and setuid on a file attribute update. This is a second symptom of the problem that Filipe noticed. XFS, on the other hand, open-codes setattr_copy in xfs_setattr_mode, xfs_setattr_nonsize, and xfs_setattr_time. Regrettably, setattr_copy is /not/ a simple copy function; it contains additional logic to clear the setgid bit when setting the mode, and XFS' version no longer matches. The VFS implements its own setuid/setgid stripping logic, which establishes consistent behavior. It's a tad unfortunate that it's scattered across notify_change, should_remove_suid, and setattr_copy but XFS should really follow the Linux VFS. Adapt XFS to use the VFS functions and get rid of the old functions. [1] https://lore.kernel.org/fstests/CAL3q7H47iNQ=Wmk83WcGB-KBJVOEtR9+qGczzCeXJ9Y2KCV25Q@mail.gmail.com/ [2] https://lore.kernel.org/linux-xfs/20220221182218.748084-1-andrey.zhadchenko@virtuozzo.com/ Fixes: 7fa294c8991c ("userns: Allow chown and setgid preservation") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> diff 2e973b2c Wed Aug 18 19:46:52 MDT 2021 Dave Chinner <dchinner@redhat.com> xfs: convert remaining mount flags to state flags The remaining mount flags kept in m_flags are actually runtime state flags. These change dynamically, so they really should be updated atomically so we don't potentially lose an update due to racing modifications. Convert these remaining flags to be stored in m_opstate and use atomic bitops to set and clear the flags. This also adds a couple of simple wrappers for common state checks - read only and shutdown. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> diff 38c26bfd Wed Aug 18 19:46:37 MDT 2021 Dave Chinner <dchinner@redhat.com> xfs: replace xfs_sb_version checks with feature flag checks Convert the xfs_sb_version_hasfoo() to checks against mp->m_features. Checks of the superblock itself during disk operations (e.g. in the read/write verifiers and the to/from disk formatters) are not converted - they operate purely on the superblock state. Everything else should use the mount features. Large parts of this conversion were done with sed with commands like this: for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f done With manual cleanups for things like "xfs_has_extflgbit" and other little inconsistencies in naming. The result is ia lot less typing to check features and an XFS binary size reduced by a bit over 3kB: $ size -t fs/xfs/built-in.a text data bss dec hex filenam before 1130866 311352 484 1442702 16038e (TOTALS) after 1127727 311352 484 1439563 15f74b (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 1b9598c8 Fri Mar 01 09:14:57 MST 2019 Luis R. Rodriguez <mcgrof@kernel.org> xfs: fix reporting supported extra file attributes for statx() statx(2) notes that any attribute that is not indicated as supported by stx_attributes_mask has no usable value. Commit 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") added support for informing userspace of extra file attributes but forgot to list these flags as supported making reporting them rather useless for the pedantic userspace author. $ git describe --contains 5f955f26f3d42d04aba65590a32eb70eedb7f37d v4.11-rc6~5^2^2~2 Fixes: 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: add a comment reminding people to keep attributes_mask up to date] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> diff 1b9598c8 Fri Mar 01 09:14:57 MST 2019 Luis R. Rodriguez <mcgrof@kernel.org> xfs: fix reporting supported extra file attributes for statx() statx(2) notes that any attribute that is not indicated as supported by stx_attributes_mask has no usable value. Commit 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") added support for informing userspace of extra file attributes but forgot to list these flags as supported making reporting them rather useless for the pedantic userspace author. $ git describe --contains 5f955f26f3d42d04aba65590a32eb70eedb7f37d v4.11-rc6~5^2^2~2 Fixes: 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: add a comment reminding people to keep attributes_mask up to date] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> diff 1b9598c8 Fri Mar 01 09:14:57 MST 2019 Luis R. Rodriguez <mcgrof@kernel.org> xfs: fix reporting supported extra file attributes for statx() statx(2) notes that any attribute that is not indicated as supported by stx_attributes_mask has no usable value. Commit 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") added support for informing userspace of extra file attributes but forgot to list these flags as supported making reporting them rather useless for the pedantic userspace author. $ git describe --contains 5f955f26f3d42d04aba65590a32eb70eedb7f37d v4.11-rc6~5^2^2~2 Fixes: 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: add a comment reminding people to keep attributes_mask up to date] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> diff 1b9598c8 Fri Mar 01 09:14:57 MST 2019 Luis R. Rodriguez <mcgrof@kernel.org> xfs: fix reporting supported extra file attributes for statx() statx(2) notes that any attribute that is not indicated as supported by stx_attributes_mask has no usable value. Commit 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") added support for informing userspace of extra file attributes but forgot to list these flags as supported making reporting them rather useless for the pedantic userspace author. $ git describe --contains 5f955f26f3d42d04aba65590a32eb70eedb7f37d v4.11-rc6~5^2^2~2 Fixes: 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: add a comment reminding people to keep attributes_mask up to date] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |
/linux-master/fs/ocfs2/ | ||
H A D | file.c | diff 0d72b928 Mon Aug 07 13:38:33 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 2cb1e089 Mon May 22 07:50:15 MDT 2023 David Howells <dhowells@redhat.com> splice: Use filemap_splice_read() instead of generic_file_splice_read() Replace pointers to generic_file_splice_read() with calls to filemap_splice_read(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> diff 839b6386 Fri Nov 05 14:34:55 MDT 2021 Jan Kara <jack@suse.cz> ocfs2: fix data corruption on truncate Patch series "ocfs2: Truncate data corruption fix". As further testing has shown, commit 5314454ea3f ("ocfs2: fix data corruption after conversion from inline format") didn't fix all the data corruption issues the customer started observing after 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") This time I have tracked them down to two bugs in ocfs2 truncation code. One bug (truncating page cache before clearing tail cluster and setting i_size) could cause data corruption even before 6dbf7bb55598, but before that commit it needed a race with page fault, after 6dbf7bb55598 it started to be pretty deterministic. Another bug (zeroing pages beyond old i_size) used to be harmless inefficiency before commit 6dbf7bb55598. But after commit 6dbf7bb55598 in combination with the first bug it resulted in deterministic data corruption. Although fixing only the first problem is needed to stop data corruption, I've fixed both issues to make the code more robust. This patch (of 2): ocfs2_truncate_file() did unmap invalidate page cache pages before zeroing partial tail cluster and setting i_size. Thus some pages could be left (and likely have left if the cluster zeroing happened) in the page cache beyond i_size after truncate finished letting user possibly see stale data once the file was extended again. Also the tail cluster zeroing was not guaranteed to finish before truncate finished causing possible stale data exposure. The problem started to be particularly easy to hit after commit 6dbf7bb55598 "fs: Don't invalidate page buffers in block_write_full_page()" stopped invalidation of pages beyond i_size from page writeback path. Fix these problems by unmapping and invalidating pages in the page cache after the i_size is reduced and tail cluster is zeroed out. Link: https://lkml.kernel.org/r/20211025150008.29002-1-jack@suse.cz Link: https://lkml.kernel.org/r/20211025151332.11301-1-jack@suse.cz Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9449ad33 Thu Jul 29 15:53:41 MDT 2021 Junxiao Bi <junxiao.bi@oracle.com> ocfs2: issue zeroout to EOF blocks For punch holes in EOF blocks, fallocate used buffer write to zero the EOF blocks in last cluster. But since ->writepage will ignore EOF pages, those zeros will not be flushed. This "looks" ok as commit 6bba4471f0cc ("ocfs2: fix data corruption by fallocate") will zero the EOF blocks when extend the file size, but it isn't. The problem happened on those EOF pages, before writeback, those pages had DIRTY flag set and all buffer_head in them also had DIRTY flag set, when writeback run by write_cache_pages(), DIRTY flag on the page was cleared, but DIRTY flag on the buffer_head not. When next write happened to those EOF pages, since buffer_head already had DIRTY flag set, it would not mark page DIRTY again. That made writeback ignore them forever. That will cause data corruption. Even directio write can't work because it will fail when trying to drop pages caches before direct io, as it found the buffer_head for those pages still had DIRTY flag set, then it will fall back to buffer io mode. To make a summary of the issue, as writeback ingores EOF pages, once any EOF page is generated, any write to it will only go to the page cache, it will never be flushed to disk even file size extends and that page is not EOF page any more. The fix is to avoid zero EOF blocks with buffer write. The following code snippet from qemu-img could trigger the corruption. 656 open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11 ... 660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...> 660 fallocate(11, 0, 2275868672, 327680) = 0 658 pwrite64(11, " Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9449ad33 Thu Jul 29 15:53:41 MDT 2021 Junxiao Bi <junxiao.bi@oracle.com> ocfs2: issue zeroout to EOF blocks For punch holes in EOF blocks, fallocate used buffer write to zero the EOF blocks in last cluster. But since ->writepage will ignore EOF pages, those zeros will not be flushed. This "looks" ok as commit 6bba4471f0cc ("ocfs2: fix data corruption by fallocate") will zero the EOF blocks when extend the file size, but it isn't. The problem happened on those EOF pages, before writeback, those pages had DIRTY flag set and all buffer_head in them also had DIRTY flag set, when writeback run by write_cache_pages(), DIRTY flag on the page was cleared, but DIRTY flag on the buffer_head not. When next write happened to those EOF pages, since buffer_head already had DIRTY flag set, it would not mark page DIRTY again. That made writeback ignore them forever. That will cause data corruption. Even directio write can't work because it will fail when trying to drop pages caches before direct io, as it found the buffer_head for those pages still had DIRTY flag set, then it will fall back to buffer io mode. To make a summary of the issue, as writeback ingores EOF pages, once any EOF page is generated, any write to it will only go to the page cache, it will never be flushed to disk even file size extends and that page is not EOF page any more. The fix is to avoid zero EOF blocks with buffer write. The following code snippet from qemu-img could trigger the corruption. 656 open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11 ... 660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...> 660 fallocate(11, 0, 2275868672, 327680) = 0 658 pwrite64(11, " Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 2b5f52c5 Wed Apr 07 06:36:44 MDT 2021 Miklos Szeredi <mszeredi@redhat.com> ocfs2: convert to fileattr Use the fileattr API to let the VFS handle locking, permission checking and conversion. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: Joel Becker <jlbec@evilplan.org> diff 90bd070a Fri Apr 09 14:27:29 MDT 2021 Wengang Wang <wen.gang.wang@oracle.com> ocfs2: fix deadlock between setattr and dio_end_io_write The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a7c033 ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 90bd070a Fri Apr 09 14:27:29 MDT 2021 Wengang Wang <wen.gang.wang@oracle.com> ocfs2: fix deadlock between setattr and dio_end_io_write The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a7c033 ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
/linux-master/fs/nilfs2/ | ||
H A D | inode.c | diff 21a87d88 Sat Oct 01 09:08:04 MDT 2022 Ryusuke Konishi <konishi.ryusuke@gmail.com> nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level() If the i_mode field in inode of metadata files is corrupted on disk, it can cause the initialization of bmap structure, which should have been called from nilfs_read_inode_common(), not to be called. This causes a lockdep warning followed by a NULL pointer dereference at nilfs_bmap_lookup_at_level(). This patch fixes these issues by adding a missing sanitiy check for the i_mode field of metadata file's inode. Link: https://lkml.kernel.org/r/20221002030804.29978-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+2b32eb36c1a825b7a74c@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff e897be17 Fri Apr 01 12:28:18 MDT 2022 Ryusuke Konishi <konishi.ryusuke@gmail.com> nilfs2: fix lockdep warnings in page operations for btree nodes Patch series "nilfs2 lockdep warning fixes". The first two are to resolve the lockdep warning issue, and the last one is the accompanying cleanup and low priority. Based on your comment, this series solves the issue by separating inode object as needed. Since I was worried about the impact of the object composition changes, I tested the series carefully not to cause regressions especially for delicate functions such like disk space reclamation and snapshots. This patch (of 3): If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at inode_to_wb() during page/folio operations for btree nodes: WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline] WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline] WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509 Modules linked in: ... RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline] RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline] RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509 ... Call Trace: __set_page_dirty include/linux/pagemap.h:834 [inline] mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145 nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline] nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009 nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline] nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036 nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline] nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 This is because nilfs2 uses two page caches for each inode and inode->i_mapping never points to one of them, the btree node cache. This causes inode_to_wb(inode) to refer to a different page cache than the caller page/folio operations such like __folio_start_writeback(), __folio_end_writeback(), or __folio_mark_dirty() acquired the lock. This patch resolves the issue by allocating and using an additional inode to hold the page cache of btree nodes. The inode is attached one-to-one to the traditional nilfs2 inode if it requires a block mapping with b-tree. This setup change is in memory only and does not affect the disk format. Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com Reported-by: Hao Sun <sunhao.th@gmail.com> Reported-by: David Hildenbrand <david@redhat.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 1b0e3186 Tue Aug 11 19:35:43 MDT 2020 Eric Biggers <ebiggers@google.com> nilfs2: only call unlock_new_inode() if I_NEW Patch series "nilfs2 updates". This patch (of 3): unlock_new_inode() is only meant to be called after a new inode has already been inserted into the hash table. But nilfs_new_inode() can call it even before it has inserted the inode, triggering the WARNING in unlock_new_inode(). Fix this by only calling unlock_new_inode() if the inode has the I_NEW flag set, indicating that it's in the table. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1595860111-3920-1-git-send-email-konishi.ryusuke@gmail.com Link: http://lkml.kernel.org/r/1595860111-3920-2-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 06f4abf6 Mon May 23 17:23:31 MDT 2016 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: do not emit extra newline on nilfs_warning() and nilfs_error() This updates call sites of nilfs_warning() and nilfs_error() so that they don't add a duplicate newline. These output functions are already designed to add a trailing newline to the message. Link: http://lkml.kernel.org/r/1462886671-3521-2-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 2d19961d Mon May 23 17:23:20 MDT 2016 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: move cleanup code of metadata file from inode routines Refactor nilfs_clear_inode() and nilfs_i_callback() so that cleanup code or resource deallocation related to metadata file will be moved out to mdt.c. Link: http://lkml.kernel.org/r/1461935747-10380-9-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 2b0143b5 Tue Mar 17 16:25:59 MDT 2015 David Howells <dhowells@redhat.com> VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff 136e8770 Fri May 24 16:55:29 MDT 2013 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 136e8770 Fri May 24 16:55:29 MDT 2013 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 136e8770 Fri May 24 16:55:29 MDT 2013 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 136e8770 Fri May 24 16:55:29 MDT 2013 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 136e8770 Fri May 24 16:55:29 MDT 2013 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 136e8770 Fri May 24 16:55:29 MDT 2013 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 136e8770 Fri May 24 16:55:29 MDT 2013 Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
/linux-master/fs/ext2/ | ||
H A D | inode.c | diff 2ebc736c Thu Aug 17 13:59:25 MDT 2023 Georg Ottinger <g.ottinger@gmx.at> ext2: improve consistency of ext2_fsblk_t datatype usage The ext2 block allocation/deallocation functions and their respective calls use a mixture of unsigned long and ext2_fsblk_t datatypes to index the desired ext2 block. This commit replaces occurrences of unsigned long with ext2_fsblk_t, covering the functions ext2_new_block(), ext2_new_blocks(), ext2_free_blocks(), ext2_free_data() and ext2_free_branches(). This commit is rather conservative, and only replaces unsigned long with ext2_fsblk_t if the variable is used to index a specific ext2 block. Signed-off-by: Georg Ottinger <g.ottinger@gmx.at> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230817195925.10268-1-g.ottinger@gmx.at> diff 0d72b928 Mon Aug 07 13:38:33 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff fcced95b Fri Apr 21 03:46:11 MDT 2023 Ritesh Harjani (IBM) <ritesh.list@gmail.com> ext2/dax: Fix ext2_setsize when len is page aligned PAGE_ALIGN(x) macro gives the next highest value which is multiple of pagesize. But if x is already page aligned then it simply returns x. So, if x passed is 0 in dax_zero_range() function, that means the length gets passed as 0 to ->iomap_begin(). In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on here in ext2_get_blocks(). BUG_ON(maxblocks == 0); Instead we should be calling dax_truncate_page() here which takes care of it. i.e. it only calls dax_zero_range if the offset is not page/block aligned. This can be easily triggered with following on fsdax mounted pmem device. dd if=/dev/zero of=file count=1 bs=512 truncate -s 0 file [79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff) [93.793207] ------------[ cut here ]------------ [93.795102] kernel BUG at fs/ext2/inode.c:637! [93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI [93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139 [93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610 <...> [93.835298] Call Trace: [93.836253] <TASK> [93.837103] ? lock_acquire+0xf8/0x110 [93.838479] ? d_lookup+0x69/0xd0 [93.839779] ext2_iomap_begin+0xa7/0x1c0 [93.841154] iomap_iter+0xc7/0x150 [93.842425] dax_zero_range+0x6e/0xa0 [93.843813] ext2_setsize+0x176/0x1b0 [93.845164] ext2_setattr+0x151/0x200 [93.846467] notify_change+0x341/0x4e0 [93.847805] ? lock_acquire+0xf8/0x110 [93.849143] ? do_truncate+0x74/0xe0 [93.850452] ? do_truncate+0x84/0xe0 [93.851739] do_truncate+0x84/0xe0 [93.852974] do_sys_ftruncate+0x2b4/0x2f0 [93.854404] do_syscall_64+0x3f/0x90 [93.855789] entry_SYSCALL_64_after_hwframe+0x72/0xdc CC: stable@vger.kernel.org Fixes: 2aa3048e03d3 ("iomap: switch iomap_zero_range to use iomap_iter") Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <046a58317f29d9603d1068b2bbae47c2332c17ae.1682069716.git.ritesh.list@gmail.com> diff 2aab03b8 Sun Jun 05 06:55:09 MDT 2022 Xiang wangx <wangxiang@cdjrlc.com> fs: Fix syntax errors in comments Delete the redundant word 'not'. Link: https://lore.kernel.org/r/20220605125509.14837-1-wangxiang@cdjrlc.com Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Jan Kara <jack@suse.cz> diff 9583db23 Tue Jul 20 07:33:38 MDT 2021 Christoph Hellwig <hch@lst.de> ext2: make ext2_iomap_ops available unconditionally ext2_iomap_ops will be used for the FIEMAP support going forward, so make it available unconditionally. Link: https://lore.kernel.org/r/20210720133341.405438-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 5aa1437d Thu May 17 15:18:30 MDT 2018 Al Viro <viro@zeniv.linux.org.uk> ext2: fix a block leak open file, unlink it, then use ioctl(2) to make it immutable or append only. Now close it and watch the blocks *not* freed... Immutable/append-only checks belong in ->setattr(). Note: the bug is old and backport to anything prior to 737f2e93b972 ("ext2: convert to use the new truncate convention") will need these checks lifted into ext2_setattr(). Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
/linux-master/fs/ocfs2/dlmfs/ | ||
H A D | dlmfs.c | diff e22c3872 Thu Aug 31 13:38:27 MDT 2023 Azeem Shaikh <azeemshaikh38@gmail.com> fs: ocfs2: replace strlcpy with sysfs_emit strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with sysfs_emit(). Direct replacement is safe here since its ok for `kernel_param_ops.get()` to return -errno [3]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 [3] https://elixir.bootlin.com/linux/v6.5/source/include/linux/moduleparam.h#L52 Link: https://lkml.kernel.org/r/20230831193827.1528867-1-azeemshaikh38@gmail.com Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Layton <jlayton@kernel.org> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff e22c3872 Thu Aug 31 13:38:27 MDT 2023 Azeem Shaikh <azeemshaikh38@gmail.com> fs: ocfs2: replace strlcpy with sysfs_emit strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with sysfs_emit(). Direct replacement is safe here since its ok for `kernel_param_ops.get()` to return -errno [3]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 [3] https://elixir.bootlin.com/linux/v6.5/source/include/linux/moduleparam.h#L52 Link: https://lkml.kernel.org/r/20230831193827.1528867-1-azeemshaikh38@gmail.com Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Layton <jlayton@kernel.org> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 328970de Thu May 23 16:04:05 MDT 2019 Thomas Gleixner <tglx@linutronix.de> treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 145 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 021110 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 84 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100844.756442981@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff a9a08845 Sun Feb 11 15:34:03 MST 2018 Linus Torvalds <torvalds@linux-foundation.org> vfs: do bulk POLL* -> EPOLL* replacement This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 2b0143b5 Tue Mar 17 16:25:59 MDT 2015 David Howells <dhowells@redhat.com> VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff ff8fb335 Tue Jan 21 16:48:20 MST 2014 Goldwyn Rodrigues <rgoldwyn@suse.de> ocfs2: remove versioning information The versioning information is confusing for end-users. The numbers are stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the versioning system in the OCFS2 modules and let the kernel version be the guide to debug issues. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 2b15ad06 Sun Jul 24 11:43:19 MDT 2011 Al Viro <viro@zeniv.linux.org.uk> dlmfs: use inode_init_owner() don't open-code it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> diff 0016eedc Sat Jan 30 05:33:50 MST 2010 Joel Becker <joel.becker@oracle.com> ocfs2_dlmfs: Use the stackglue. Rather than directly using o2dlm, dlmfs can now use the stackglue. This allows it to use userspace cluster stacks and fs/dlm. This commit forces o2cb for now. A latter commit will bump the protocol version and allow non-o2cb stacks. This is one big sed, really. LKM_xxMODE becomes DLM_LOCK_xx. LKM_flag becomes DLM_LKF_flag. We also learn to check that the LVB is valid before reading it. Any DLM can lose the contents of the LVB during a complicated recovery. userdlm should be checking this. Now it does. dlmfs will return 0 from read(2) if the LVB was invalid. Signed-off-by: Joel Becker <joel.becker@oracle.com> |
/linux-master/fs/hugetlbfs/ | ||
H A D | inode.c | diff ae62bcb5 Mon Oct 23 08:30:49 MDT 2023 Amir Goldstein <amir73il@gmail.com> fs: report f_fsid from s_dev for "simple" filesystems There are many "simple" filesystems (*) that report null f_fsid in statfs(2). Those "simple" filesystems report sb->s_dev as the st_dev field of the stat syscalls for all inodes of the filesystem (**). In order to enable fanotify reporting of events with fsid on those "simple" filesystems, report the sb->s_dev number in f_fsid field of statfs(2). (*) For most of the "simple" filesystem refered to in this commit, the ->statfs() operation is simple_statfs(). Some of those fs assign the simple_statfs() method directly in their ->s_op struct and some assign it indirectly via a call to simple_fill_super() or to pseudo_fs_fill_super() with either custom or "simple" s_op. We also make the same change to efivarfs and hugetlbfs, although they do not use simple_statfs(), because they use the simple_* inode opreations (e.g. simple_lookup()). (**) For most of the "simple" filesystems, the ->getattr() method is not assigned, so stat() is implemented by generic_fillattr(). A few "simple" filesystem use the simple_getattr() method which also calls generic_fillattr() to fill most of the stat struct. The two exceptions are procfs and 9p. procfs implements several different ->getattr() methods, but they all end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. 9p has more complicated ->getattr() methods, but they too, end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. Note that 9p and kernfs also call simple_statfs() from custom ->statfs() methods which already fill the f_fsid field, but v9fs_statfs() calls simple_statfs() only in case f_fsid was not filled and kenrfs_statfs() overwrites f_fsid after calling simple_statfs(). Link: https://lore.kernel.org/r/20230919094820.g5bwharbmy2dq46w@quack3/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20231023143049.2944970-1-amir73il@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> diff ae62bcb5 Mon Oct 23 08:30:49 MDT 2023 Amir Goldstein <amir73il@gmail.com> fs: report f_fsid from s_dev for "simple" filesystems There are many "simple" filesystems (*) that report null f_fsid in statfs(2). Those "simple" filesystems report sb->s_dev as the st_dev field of the stat syscalls for all inodes of the filesystem (**). In order to enable fanotify reporting of events with fsid on those "simple" filesystems, report the sb->s_dev number in f_fsid field of statfs(2). (*) For most of the "simple" filesystem refered to in this commit, the ->statfs() operation is simple_statfs(). Some of those fs assign the simple_statfs() method directly in their ->s_op struct and some assign it indirectly via a call to simple_fill_super() or to pseudo_fs_fill_super() with either custom or "simple" s_op. We also make the same change to efivarfs and hugetlbfs, although they do not use simple_statfs(), because they use the simple_* inode opreations (e.g. simple_lookup()). (**) For most of the "simple" filesystems, the ->getattr() method is not assigned, so stat() is implemented by generic_fillattr(). A few "simple" filesystem use the simple_getattr() method which also calls generic_fillattr() to fill most of the stat struct. The two exceptions are procfs and 9p. procfs implements several different ->getattr() methods, but they all end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. 9p has more complicated ->getattr() methods, but they too, end up calling generic_fillattr() to fill the st_dev field from sb->s_dev. Note that 9p and kernfs also call simple_statfs() from custom ->statfs() methods which already fill the f_fsid field, but v9fs_statfs() calls simple_statfs() only in case f_fsid was not filled and kenrfs_statfs() overwrites f_fsid after calling simple_statfs(). Link: https://lore.kernel.org/r/20230919094820.g5bwharbmy2dq46w@quack3/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20231023143049.2944970-1-amir73il@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff a08c7193 Tue Sep 26 01:20:17 MDT 2023 Sidhartha Kumar <sidhartha.kumar@oracle.com> mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
/linux-master/fs/exfat/ | ||
H A D | file.c | diff 0d72b928 Mon Aug 07 13:38:33 MDT 2023 Jeff Layton <jlayton@kernel.org> fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> diff 2cb1e089 Mon May 22 07:50:15 MDT 2023 David Howells <dhowells@redhat.com> splice: Use filemap_splice_read() instead of generic_file_splice_read() Replace pointers to generic_file_splice_read() with calls to filemap_splice_read(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 2f221d6f Thu Jan 21 06:19:26 MST 2021 Christian Brauner <christian.brauner@ubuntu.com> attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> diff 81df1ad4 Mon Apr 20 20:13:10 MDT 2020 Eric Sandeen <sandeen@sandeen.net> exfat: truncate atimes to 2s granularity The timestamp for access_time has double seconds granularity(There is no 10msIncrement field for access_time unlike create/modify_time). exfat's atimes are restricted to only 2s granularity so after we set an atime, round it down to the nearest 2s and set the sub-second component of the timestamp to 0. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> diff 81df1ad4 Mon Apr 20 20:13:10 MDT 2020 Eric Sandeen <sandeen@sandeen.net> exfat: truncate atimes to 2s granularity The timestamp for access_time has double seconds granularity(There is no 10msIncrement field for access_time unlike create/modify_time). exfat's atimes are restricted to only 2s granularity so after we set an atime, round it down to the nearest 2s and set the sub-second component of the timestamp to 0. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> diff 81df1ad4 Mon Apr 20 20:13:10 MDT 2020 Eric Sandeen <sandeen@sandeen.net> exfat: truncate atimes to 2s granularity The timestamp for access_time has double seconds granularity(There is no 10msIncrement field for access_time unlike create/modify_time). exfat's atimes are restricted to only 2s granularity so after we set an atime, round it down to the nearest 2s and set the sub-second component of the timestamp to 0. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> |
Completed in 2384 milliseconds