fs/9p: remove erroneous nlink init from legacy stat2inode

In 9p2000 legacy mode, stat2inode initializes nlink to 1,
which is redundant with what alloc_inode should have already set.
9p2000.u overrides this with extensions if present in the stat
structure, and 9p2000.L incorporates nlink into its stat structure.

At the very least this probably messes with directory nlink
accounting in legacy mode.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: translate O_TRUNC into OTRUNC

This one hits both 9P2000 and .u as it appears v9fs has never translated
the O_TRUNC flag.

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: only translate RWX permissions for plain 9P2000

Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u.

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: fix uninitialized values during inode evict

If an iget fails due to not being able to retrieve information
from the server then the inode structure is only partially
initialized. When the inode gets evicted, references to
uninitialized structures (like fscache cookies) were being
made.

This patch checks for a bad_inode before doing anything other
than clearing the inode from the cache. Since the inode is
bad, it shouldn't have any state associated with it that needs
to be written back (and there really isn't a way to complete
those anyways).

Reported-by: syzbot+eb83fe1cce5833cd66a0@syzkaller.appspotmail.com
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: simplify iget to remove unnecessary paths

Remove the additional comparison operators and switch to
simply lookup by inode number (aka qid.path).

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: rework qid2ino logic

This changes from a function to a macro because we can
figure out if we are 32 or 64 bit at compile time.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: Eliminate now unused v9fs_get_inode

Now with all inode allocation going through get_from_fid
functions we can remove v9fs_get_inode and reduce us down
to a single inode allocation path.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

9p: Fix initialisation of netfs_inode for 9p

The 9p filesystem is calling netfs_inode_init() in v9fs_init_inode() -
before the struct inode fields have been initialised from the obtained file
stats (ie. after v9fs_stat2inode*() has been called), but netfslib wants to
set a couple of its fields from i_size.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org

9p: Use netfslib read/write_iter

Use netfslib's read and write iteration helpers, allowing netfslib to take
over the management of the page cache for 9p files and to manage local disk
caching. In particular, this eliminates write_begin, write_end, writepage
and all mentions of struct page and struct folio from 9p.

Note that netfslib now offers the possibility of write-through caching if
that is desirable for 9p: just set the NETFS_ICTX_WRITETHROUGH flag in
v9inode->netfs.flags in v9fs_set_netfs_context().

Note also this is untested as I can't get ganesha.nfsd to correctly parse
the config to turn on 9p support.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org

netfs: Optimise away reads above the point at which there can be no data

Track the file position above which the server is not expected to have any
data (the "zero point") and preemptively assume that we can satisfy
requests by filling them with zeroes locally rather than attempting to
download them if they're over that line - even if we've written data back
to the server. Assume that any data that was written back above that
position is held in the local cache. Note that we have to split requests
that straddle the line.

Make use of this to optimise away some reads from the server. We need to
set the zero point in the following circumstances:

(1) When we see an extant remote inode and have no cache for it, we set
the zero_point to i_size.

(2) On local inode creation, we set zero_point to 0.

(3) On local truncation down, we reduce zero_point to the new i_size if
the new i_size is lower.

(4) On local truncation up, we don't change zero_point.

(5) On local modification, we don't change zero_point.

(6) On remote invalidation, we set zero_point to the new i_size.

(7) If stored data is discarded from the pagecache or culled from fscache,
we must set zero_point above that if the data also got written to the
server.

(8) If dirty data is written back to the server, but not fscache, we must
set zero_point above that.

(9) If a direct I/O write is made, set zero_point above that.

Assuming the above, any read from the server at or above the zero_point
position will return all zeroes.

The zero_point value can be stored in the cache, provided the above rules
are applied to it by any code that culls part of the local cache.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org

netfs: Move pinning-for-writeback from fscache to netfs

Move the resource pinning-for-writeback from fscache code to netfslib code.
This is used to keep a cache backing object pinned whilst we have dirty
pages on the netfs inode in the pagecache such that VM writeback will be
able to reach it.

Whilst we're at it, switch the parameters of netfs_unpin_writeback() to
match ->write_inode() so that it can be used for that directly.

Note that this mechanism could be more generically useful than that for
network filesystems. Quite often they have to keep around other resources
(e.g. authentication tokens or network connections) until the writeback is
complete.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org

9p: convert to new timestamp accessors

Convert to using the new inode timestamp accessor functions.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-13-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

fs: pass the request_mask to generic_fillattr

generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.

Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.

Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

9p: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-19-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

9p: remove dead stores (variable set again without being read)

The 9p code for some reason used to initialize variables outside of the
declaration, e.g. instead of just initializing the variable like this:

int retval = 0

We would be doing this:

int retval;
retval = 0;

This is perfectly fine and the compiler will just optimize dead stores
anyway, but scan-build seems to think this is a problem and there are
many of these warnings making the output of scan-build full of such
warnings:
fs/9p/vfs_inode.c:916:2: warning: Value stored to 'retval' is never read [deadcode.DeadStores]
retval = 0;
^ ~

I have no strong opinion here, but if we want to regularly run
scan-build we should fix these just to silence the messages.

I've confirmed these all are indeed ok to remove.

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

9p: Remove INET dependency

9pfs can run over assorted transports, so it doesn't have an INET
dependency. Drop it and remove the includes of linux/inet.h.

NET_9P_FD/trans_fd.o builds without INET or UNIX and is usable over
plain file descriptors. However, tcp and unix functionality is still
built and would generate runtime failures if used. Add imply INET and
UNIX to NET_9P_FD, so functionality is enabled by default but can still
be explicitly disabled.

This allows configuring 9pfs over Xen with INET and UNIX disabled.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fs/9p: Fix bit operation logic error

This re-introduces a fix that somehow got dropped during rebase of the
current series in for-next. When writeback is enabled, opens
are forced to support both read and write operations but with the
logic error other flags may be dropped unintentionaly.

Reported-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: Rework cache modes and add new options to Documentation

Switch cache modes to a bit-mask and use legacy
cache names as shortcuts. Update documentation to
include information on both shortcuts and bitmasks.

This patch also fixes missing guards related to fscache.

Update the documentation for new mount flags
and cache modes.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: remove writeback fid and fix per-file modes

This patch removes the creating of an additional writeback_fid
for opened files. The patch addresses problems when files
were opened write-only or getattr on files with dirty caches.

This patch also incorporates information about cache behavior
in the fid for every file. This allows us to reflect cache
behavior from mount flags, open mode, and information from
the server to inform readahead and writeback behavior.

This includes adding support for a 9p semantic that qid.version==0
is used to mark a file as non-cachable which is important for
synthetic files. This may have a side-effect of not supporting
caching on certain legacy file servers that do not properly set
qid.version. There is also now a mount flag which can disable
the qid.version behavior.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>

fs/9p: Consolidate file operations and add readahead and writeback

We had 3 different sets of file operations across 2 different protocol
variants differentiated by cache which really only changed 3
functions. But the real problem is that certain file modes, mount
options, and other factors weren't being considered when we
decided whether or not to use caches.

This consolidates all the operations and switches
to conditionals within a common set to decide whether or not
to do different aspects of caching.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>

fs/9p: Expand setup of writeback cache to all levels

If cache is enabled, make sure we are putting the right things
in place (mainly impacts mmap). This also sets us up for more
cache levels.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>

fs: port inode_init_owner() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->rename() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->mknod() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->mkdir() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->symlink() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->create() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->getattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->setattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

9p/fs: Remove unneeded idr.h #include

The 9p fs does not use IDR or IDA functionalities. So there is no point in
including <linux/idr.h>.
Remove it.

Link: https://lkml.kernel.org/r/3d1e0ed9714eaee7e18d9f5b0b4bfa49b00b286d.1669553950.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: reword subject]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p fid refcount: cleanup p9_fid_put calls

Simplify p9_fid_put cleanup path in many 9p functions since the function
is noop on null or error fids.

Also make the *_add_fid() helpers "steal" the fid by nulling its
pointer, so put after them will be noop.

This should lead to no change of behaviour

Link: https://lkml.kernel.org/r/20220612085330.1451496-7-asmadeus@codewreck.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p fid refcount: add p9_fid_get/put wrappers

I was recently reminded that it is not clear that p9_client_clunk()
was actually just decrementing refcount and clunking only when that
reaches zero: make it clear through a set of helpers.

This will also allow instrumenting refcounting better for debugging
next patch

Link: https://lkml.kernel.org/r/20220612085330.1451496-5-asmadeus@codewreck.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p: fix fid refcount leak in v9fs_vfs_get_link

we check for protocol version later than required, after a fid has
been obtained. Just move the version check earlier.

Link: https://lkml.kernel.org/r/20220612085330.1451496-3-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

netfs: Further cleanups after struct netfs_inode wrapper introduced

Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up. For
type safety, it's better not to do that (and it's less typing too).

Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer. Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.

netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.

Changes
=======
- Updated the kerneldoc comments and documentation [DH].

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/

netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context

While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled. This was causing the
following complaint[1] from gcc v12:

In file included from include/linux/string.h:253,
from include/linux/ceph/ceph_debug.h:7,
from fs/ceph/inode.c:2:
In function 'fortify_memset_chk',
inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
242 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode). The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.

Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).

Most of the changes were done with:

perl -p -i -e 's/vfs_inode/netfs.inode/'g \
`git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]`

Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.

Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].

Version #2:
- Fix a couple of missed name changes due to a disabled cifs option.
- Rename nfs_i_context to nfs_inode
- Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
structs.

[ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily
disable '-Wattribute-warning' for now") that is no longer needed ]

Fixes: bc899ee1c898 ("netfs: Add a netfs inode context")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
cc: Jonathan Corbet <corbet@lwn.net>
cc: Eric Van Hensbergen <ericvh@gmail.com>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: William Kucharski <william.kucharski@oracle.com>
cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
cc: Dave Chinner <david@fromorbit.com>
cc: linux-doc@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2]
Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3]
Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4]
Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

netfs: Add a netfs inode context

Add a netfs_i_context struct that should be included in the network
filesystem's own inode struct wrapper, directly after the VFS's inode
struct, e.g.:

struct my_inode {
struct {
/* These must be contiguous */
struct inode vfs_inode;
struct netfs_i_context netfs_ctx;
};
};

The netfs_i_context struct so far contains a single field for the network
filesystem to use - the cache cookie:

struct netfs_i_context {
...
struct fscache_cookie *cache;
};

Three functions are provided to help with this:

(1) void netfs_i_context_init(struct inode *inode,
const struct netfs_request_ops *ops);

Initialise the netfs context and set the operations.

(2) struct netfs_i_context *netfs_i_context(struct inode *inode);

Find the netfs context from the VFS inode.

(3) struct inode *netfs_inode(struct netfs_i_context *ctx);

Find the VFS inode from the netfs context.

Changes
=======
ver #4)
- Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a
cache is present[3].
- Fix netfs_skip_folio_read() to zero out all of the page, not just some
of it[3].

ver #3)
- Split out the bit to move ceph cap-getting on readahead into
ceph_init_request()[1].
- Stick in a comment to the netfs inode structs indicating the contiguity
requirements[2].

ver #2)
- Adjust documentation to match.
- Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef".
- Move the cap check from ceph_readahead() to ceph_init_request() to be
called from netfslib.
- Remove ceph_readahead() and use netfs_readahead() directly instead.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com

Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2]
Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4

fs: allocate inode by using alloc_inode_sb()

The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().

Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: Copy local writes to the cache when writing to the server

When writing to the server from v9fs_vfs_writepage(), copy the data to the
cache object too.

To make this possible, the cookie must have its active users count
incremented when the page is dirtied and kept incremented until we manage
to clean up all the pages. This allows the writeback to take place after
the last file struct is released.

This is done by taking a use on the cookie in v9fs_set_page_dirty() if we
haven't already done so (controlled by the I_PINNING_FSCACHE_WB flag) and
dropping the pin in v9fs_write_inode() if __writeback_single_inode() clears
all the outstanding dirty pages (conveyed by the unpinned_fscache_wb flag
in the writeback_control struct).

Inode eviction must also clear the flag after truncating away all the
outstanding pages.

In the future this will be handled more gracefully by netfslib.

Changes
=======
ver #3:
- Canonicalise the coherency data to make it endianness-independent.

ver #2:
- Fix an unused-var warning due to CONFIG_9P_FSCACHE=n[1].

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@gmail.com>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: v9fs-developer@lists.sourceforge.net
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819667027.215744.13815687931204222995.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906978015.143852.10646669694345706328.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967180760.1823006.5831751873616248910.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021574522.640689.13849966660182529125.stgit@warthog.procyon.org.uk/ # v4

9p: Use fscache indexing rewrite and reenable caching

Change the 9p filesystem to take account of the changes to fscache's
indexing rewrite and reenable caching in 9p.

The following changes have been made:

(1) The fscache_netfs struct is no more, and there's no need to register
the filesystem as a whole.

(2) The session cookie is now an fscache_volume cookie, allocated with
fscache_acquire_volume(). That takes three parameters: a string
representing the "volume" in the index, a string naming the cache to
use (or NULL) and a u64 that conveys coherency metadata for the
volume.

For 9p, I've made it render the volume name string as:

"9p,<devname>,<cachetag>"

where the cachetag is replaced by the aname if it wasn't supplied.

This probably needs rethinking a bit as the aname can have slashes in
it. It might be better to hash the cachetag and use the hash or I
could substitute commas for the slashes or something.

(3) The fscache_cookie_def is no more and needed information is passed
directly to fscache_acquire_cookie(). The cache no longer calls back
into the filesystem, but rather metadata changes are indicated at
other times.

fscache_acquire_cookie() is passed the same keying and coherency
information as before.

(4) The functions to set/reset/flush cookies are removed and
fscache_use_cookie() and fscache_unuse_cookie() are used instead.

fscache_use_cookie() is passed a flag to indicate if the cookie is
opened for writing. fscache_unuse_cookie() is passed updates for the
metadata if we changed it (ie. if the file was opened for writing).

These are called when the file is opened or closed.

(5) wait_on_page_bit[_killable]() is replaced with the specific wait
functions for the bits waited upon.

(6) I've got rid of some of the 9p-specific cache helper functions and
called things like fscache_relinquish_cookie() directly as they'll
optimise away if v9fs_inode_cookie() returns an unconditional NULL
(which will be the case if CONFIG_9P_FSCACHE=n).

(7) v9fs_vfs_setattr() is made to call fscache_resize() to change the size
of the cache object.

Notes:

(A) We should call fscache_invalidate() if we detect that the server's
copy of a file got changed by a third party, but I don't know where to
do that. We don't need to do that when allocating the cookie as we
get a check-and-invalidate when we initially bind to the cache object.

(B) The copy-to-cache-on-writeback side of things will be handled in
separate patch.

Changes
=======
ver #3:
- Canonicalise the cookie key and coherency data to make them
endianness-independent.

ver #2:
- Use gfpflags_allow_blocking() rather than using flag directly.
- fscache_acquire_volume() now returns errors.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@gmail.com>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: v9fs-developer@lists.sourceforge.net
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819664645.215744.1555314582005286846.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906975017.143852.3459573173204394039.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967178512.1823006.17377493641569138183.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021573143.640689.3977487095697717967.stgit@warthog.procyon.org.uk/ # v4

9p: fix a bunch of checkpatch warnings

Sohaib Mohamed started a serie of tiny and incomplete checkpatch fixes but
seemingly stopped halfway -- take over and do most of it.
This is still missing net/9p/trans* and net/9p/protocol.c for a later
time...

Link: http://lkml.kernel.org/r/20211102134608.1588018-3-dominique.martinet@atmark-techno.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p p9mode2perm: remove useless strlcpy and check sscanf return code

This is also a checkpatch warning fix but this one might have implications
so keeping it separate

Link: http://lkml.kernel.org/r/20211102134608.1588018-5-dominique.martinet@atmark-techno.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p: fix file headers

- add missing SPDX-License-Identifier
- remove (sometimes incorrect) file name from file header

Link: http://lkml.kernel.org/r/20211102134608.1588018-2-dominique.martinet@atmark-techno.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p: Fix a bunch of kerneldoc warnings shown up by W=1

Fix a bunch of kerneldoc warnings shown up by W=1 in the 9p filesystem:

(1) Add/remove/fix kerneldoc parameters descriptions.

(2) Move __add_fid() from between v9fs_fid_add() and its comment.

(3) 9p's caches_show() doesn't really make sense as an API function, so
remove the kerneldoc annotation. It's also not prefixed with 'v9fs_'.
Also remove the kerneldoc markers from the 9p fscache wrappers.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Mauro Carvalho Chehab <mchehab@kernel.org>
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/ # rfc v1
Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/ # rfc v2

new helper: inode_wrong_type()

inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type. We have enough of
those checks open-coded to make a helper worthwhile.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: fix misuse of sscanf() in v9fs_stat2inode()

1) sscanf() return value needs to be checked, damnit
2) sscanf() is perfectly capable of checking for fixed prefix,
no need for that %13s + strncmp with constant string.
3) st->extension is a valid string; no need for voodoo with
str*cpy() there.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: make helpers idmap mount aware

Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

stat: handle idmapped mounts

The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

attr: handle idmapped mounts

When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

inode: make init and permission helpers idmapped mount aware

The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

9p: add refcount to p9_fid struct

Fix race issue in fid contention.

Eric's and Greg's patch offer a mechanism to fix open-unlink-f*syscall
bug in 9p. But there is race issue in fid parallel accesses.
As Greg's patch stores all of fids from opened files into according inode,
so all the lookup fid ops can retrieve fid from inode preferentially. But
there is no mechanism to handle the fid contention issue. For example,
there are two threads get the same fid in the same time and one of them
clunk the fid before the other thread ready to discard the fid. In this
scenario, it will lead to some fatal problems, even kernel core dump.

I introduce a mechanism to fix this race issue. A counter field introduced
into p9_fid struct to store the reference counter to the fid. When a fid
is allocated from the inode or dentry, the counter will increase, and
will decrease at the end of its occupation. It is guaranteed that the
fid won't be clunked before the reference counter go down to 0, then
we can avoid the clunked fid to be used.

tests:
race issue test from the old test case:
for file in {01..50}; do touch f.${file}; done
seq 1 1000 | xargs -n 1 -P 50 -I{} cat f.* > /dev/null

open-unlink-f*syscall test:
I have tested for f*syscall include: ftruncate fstat fchown fchmod faccessat.

Link: http://lkml.kernel.org/r/20200923141146.90046-5-jianyong.wu@arm.com
Fixes: 478ba09edc1f ("fs/9p: search open fids first")
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

fs/9p: track open fids

This patch adds accounting of open fids in a list hanging off the i_private
field of the corresponding inode. This allows faster lookups compared to
searching the full 9p client list.

The lookup code is modified accordingly.

Link: http://lkml.kernel.org/r/20200923141146.90046-3-jianyong.wu@arm.com
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

fs/9p: fix create-unlink-getattr idiom

Fixes several outstanding bug reports of not being able to getattr from an
open file after an unlink. This patch cleans up transient fids on an unlink
and will search open fids on a client if it detects a dentry that appears to
have been unlinked. This search is necessary because fstat does not pass fd
information through the VFS API to the filesystem, only the dentry which for
9p has an imperfect match to fids.

Inherent in this patch is also a fix for the qid handling on create/open
which apparently wasn't being set correctly and was necessary for the search
to succeed.

A possible optimization over this fix is to include accounting of open fids
with the inode in the private data (in a similar fashion to the way we track
transient fids with dentries). This would allow a much quicker search for
a matching open fid.

(changed v9fs_fid_find_global to v9fs_fid_find_inode in comment)

Link: http://lkml.kernel.org/r/20200923141146.90046-2-jianyong.wu@arm.com
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p: Remove unneeded cast from memory allocation

Remove kmem_cache_alloc return value cast.

Coccinelle emits the following warning:

./fs/9p/vfs_inode.c:226:12-29: WARNING: casting value returned by memory allocation function to (struct v9fs_inode *) is useless.

Link: http://lkml.kernel.org/r/1596013140-49744-1-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
[Dominique: commit message wording]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p: remove unused code in 9p

These codes have been commented out since 2007 and lay in kernel
since then. So, it's better to remove them.

Link: http://lkml.kernel.org/r/20200628074337.45895-1-jianyong.wu@arm.com
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p: retrieve fid from file when file instance exist.

In the current setattr implementation in 9p, fid is always retrieved
from dentry no matter file instance exists or not. If so, there may be
some info related to opened file instance dropped. So it's better
to retrieve fid from file instance when it is passed to setattr.

for example:
fd=open("tmp", O_RDWR);
ftruncate(fd, 10);

The file context related with the fd will be lost as fid is always
retrieved from dentry, then the backend can't get the info of
file context. It is against the original intention of user and
may lead to bug.

Link: http://lkml.kernel.org/r/20200710101548.10108-1-jianyong.wu@arm.com
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

9p: Remove unneeded semicolon

Fixes coccicheck warning:

fs/9p/vfs_inode.c:146:3-4: Unneeded semicolon

Link: http://lkml.kernel.org/r/1576752517-58292-1-git-send-email-zhengbin13@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 188

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to free software
foundation 51 franklin street fifth floor boston ma 02111 1301 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 27 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.981318839@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: switch to ->free_inode()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: use inode->i_lock to protect i_size_write() under 32-bit

Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:

watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
Modules linked in:
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
PC is at generic_fillattr+0x104/0x108
LR is at 0xec497f00
pc : [<802b8898>] lr : [<ec497f00>] psr: 200c0013
sp : ec497e20 ip : ed608030 fp : ec497e3c
r10: 00000000 r9 : ec497f00 r8 : ed608030
r7 : ec497ebc r6 : ec497f00 r5 : ee5c1550 r4 : ee005780
r3 : 0000052d r2 : 00000000 r1 : ec497f00 r0 : ed608030
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: ac48006a DAC: 00000051
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
Backtrace:
[<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
[<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
[<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
[<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
[<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
[<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
[<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
[<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
[<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
[<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
[<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
[<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
[<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
[<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
[<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
[<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
[<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
[<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
[<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
[<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
[<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)

[dominique.martinet@cea.fr: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 7549ae3e81cc ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: Xing Gaopeng <xingaopeng@huawei.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>

get rid of 'opened' argument of ->atomic_open() - part 3

now it can be done...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

getting rid of 'opened' argument of ->atomic_open() - part 1

'opened' argument of finish_open() is unused. Kill it.

Signed-off-by Al Viro <viro@zeniv.linux.org.uk>

introduce FMODE_CREATED and switch to it

Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now). IMA is another one (here and everywhere)...

Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: unify paths in v9fs_vfs_lookup()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: don't maintain dir i_nlink if the exported fs doesn't either

If the exported filesystem dir on 9p server doesn't maintain accurate
i_nlink count, e.g. always reports i_nlink as 1, then 9p should not
maintain nlink count either, otherwise drop_link would report warning
with i_nlink being zero.

For example:

- overlayfs sets nlink to 1 for merged dir

- ext4 (with dir_nlink feature enabled) sets nlink to 1 if a dir has
more than EXT4_LINK_MAX (65000) links.

In this case, everytime a stat(2) call (getattr) on such exported dirs
on 9p client side, the i_nlink gets reset to 1, then operations like
rmdir(2), unlink(2) and rename(2) would cause the dir nlink to go to
zero (then negative), which results in warnings in drop_nlink() and/or
inc_nlink() calls.

This can be reproduced easily as the following steps:

- export a merged overlayfs dir via qemu virtfs to guest

- mount the exported virtfs in guest

- create two sub-directories in the root dir of the mounted 9pfs

- stat the root dir of 9pfs, this resets nlink to 1

- remove all subdirs, the second unlink/rmdir would trigger warning

------------[ cut here ]------------
WARNING: CPU: 3 PID: 1284 at fs/inode.c:282 drop_nlink+0x3e/0x50
...
Call Trace:
dump_stack+0x63/0x81
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
drop_nlink+0x3e/0x50
v9fs_remove+0xaa/0x130 [9p]
v9fs_vfs_rmdir+0x13/0x20 [9p]
vfs_rmdir+0xb7/0x130
do_rmdir+0x1b8/0x230
SyS_unlinkat+0x22/0x30
do_syscall_64+0x67/0x180
---[ end trace 43758d8ba91e603b ]---

Fix it by leaving i_nlink to be 1 and don't drop nlink if a directory
has nlink <= 2, which indicates that the underlying exported fs doesn't
maintain nlink count accurately. This follows what ext4 does in
ext4_dec_count().

Link: http://lkml.kernel.org/r/20180312053829.4367-1-eguan@linux.alibaba.com
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Tested-by: Roman Kapl <code@rkapl.cz>
Cc: Caspar Zhang <caspar@linux.alibaba.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: <v9fs-developer@lists.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/9p: Compare qid.path in v9fs_test_inode

Commit fd2421f54423 ("fs/9p: When doing inode lookup compare qid details
and inode mode bits.") transformed v9fs_qid_iget() to use iget5_locked()
instead of iget_locked(). However, the test() callback is not checking
fid.path at all, which means that a lookup in the inode cache can now
accidentally locate a completely wrong inode from the same inode hash
bucket if the other fields (qid.type and qid.version) match.

Fixes: fd2421f54423 ("fs/9p: When doing inode lookup compare qid details and inode mode bits.")
Cc: stable@vger.kernel.org
Reviewed-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

statx: Add a system call to make enhanced file info available

Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included. The
following have been included:

(1) Make the fields a consistent size on all arches and make them large.

(2) Spare space, request flags and information flags are provided for
future expansion.

(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).

(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).

This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].

(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).

(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].

Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.

(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).

(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].

(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].

(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...

(This requires a separate system call - I have an fsinfo() call idea
for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].

(Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].

(Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).

(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].

(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.

(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.

(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data. This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};

struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};

The defined bits in request_mask and stx_mask are:

STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:

STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

STATX_ATTR_AUTOMOUNT Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

(0) stx_dev_*, stx_blksize.

These are local system information and are always available.

(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.

These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.

If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.

If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.

Note that there are instances where the type might not be valid, for
instance Windows reparse points.

(2) stx_rdev_*.

This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.

(3) stx_btime.

Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: constify ->d_name handling

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: remove ".readlink = generic_readlink" assignments

If .readlink == NULL implies generic_readlink().

Generated by:

to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fs: Replace CURRENT_TIME with current_time() for inode timestamps

CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.

CURRENT_TIME is also not y2038 safe.

This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.

Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: rename "rename2" i_op to "rename"

Generated patch:

sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2`
sed -i "s/\brename2\b/rename/g" `git grep -wl rename2`

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fs: make remaining filesystems use .rename2

This is trivial to do:

- add flags argument to foo_rename()
- check if flags is zero
- assign foo_rename() to .rename2 instead of .rename

This doesn't mean it's impossible to support RENAME_NOREPLACE for these
filesystems, but it is not trivial, like for local filesystems.
RENAME_NOREPLACE must guarantee atomicity (i.e. it shouldn't be possible
for a file to be created on one host while it is overwritten by rename on
another host).

Filesystems converted:

9p, afs, ceph, coda, ecryptfs, kernfs, lustre, ncpfs, nfs, ocfs2, orangefs.

After this, we can get rid of the duplicate interfaces for rename.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Howells <dhowells@redhat.com> [AFS]
Acked-by: Mike Marshall <hubcap@omnibond.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Mark Fasheh <mfasheh@suse.com>

fs: Give dentry to inode_change_ok() instead of inode

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

9p: use clone_fid()

in a bunch of places it cleans the things up

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()"

In v9fs_vfs_rename() we need to clone the parents' fids, not just
find them.

Spotted-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use the right predicate in ->atomic_open() instances

->atomic_open() can be given an in-lookup dentry *or* a negative one
found in dcache. Use d_in_lookup() to tell one from another, rather
than d_unhashed().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: new helper - v9fs_parent_fid()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

don't bother with ->d_inode->i_sb - it's always equal to ->d_sb

... and neither can ever be NULL

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: use fscache mutex rather than spinlock

We may sleep inside a the lock, so use a mutex rather than spinlock.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: use fscache mutex rather than spinlock

We may sleep inside a the lock, so use a mutex rather than spinlock.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

switch ->get_link() to delayed_call, kill ->put_link()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

replace ->follow_link() with new method that could stay in RCU mode

new method: ->get_link(); replacement of ->follow_link(). The differences
are:
* inode and dentry are passed separately
* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.

It's a flagday change - the old method is gone, all in-tree instances
converted. Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode. That'll change
in the next commits.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: ->evict_inode() should kick out ->i_data, not ->i_mapping

For block devices the pagecache is associated with the inode
on bdevfs, not with the aliasing ones on the mountable filesystems.
The latter have its own ->i_data empty and ->i_mapping pointing
to the (unique per major/minor) bdevfs inode. That guarantees
cache coherence between all block device inodes with the same
device number.

Eviction of an alias inode has no business trying to evict the
pages belonging to bdevfs one; moreover, ->i_mapping is only
safe to access when the thing is opened. At the time of
->evict_inode() the victim is definitely *not* opened. We are
about to kill the address space embedded into struct inode
(inode->i_data) and that's what we need to empty of any pages.

9p instance tries to empty inode->i_mapping instead, which is
both unsafe and bogus - if we have several device nodes with
the same device number in different places, closing one of them
should not try to empty the (shared) page cache.

Fortunately, other instances in the tree are OK; they are
evicting from &inode->i_data instead, as 9p one should.

Cc: stable@vger.kernel.org # v2.6.32+, ones prior to 2.6.36 need only half of that
Reported-by: "Suzuki K. Poulose" <Suzuki.Poulose@arm.com>
Tested-by: "Suzuki K. Poulose" <Suzuki.Poulose@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: remove unnecessary new_valid_dev() checks

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: don't leave a half-initialized inode sitting around

Cc: stable@vger.kernel.org # all branches
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

get rid of assorted nameidata-related debris

pointless forward declarations, stale comments

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

don't pass nameidata to ->follow_link()

its only use is getting passed to nd_jump_link(), which can obtain
it from current->nameidata

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

new ->follow_link() and ->put_link() calling conventions

a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks. Stored pointer
is ignored in all cases except the last one.

Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().

b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is. In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: don't bother with __getname() in ->follow_link()

We copy there a kmalloc'ed string and proceed to kfree that string immediately
after that. Easier to just feed that string to nd_set_link() and _not_
kfree it until ->put_link() (which becomes kfree_put_link() in that case).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: don't bother with 4K allocation for 24-byte local array...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

VFS: normal filesystems (and lustre): d_inode() annotations

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)

Convert the following where appropriate:

(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).

(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).

(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.

In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).

Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.

However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.

There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.

The following perl+coccinelle script was used:

use strict;

my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}

my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );

my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);

foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}

[AV: overlayfs parts skipped]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch d_materialise_unique() users to d_splice_alias()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: switch to %p[dD]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: kerneldoc fixes

Function parameters comment fixing.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/9p: adjust sscanf parameters accordingly to the variable types

Signed-off-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

mm + fs: store shadow entries in page cache

Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9P: introduction of a new cache=mmap model.

- Add cache=mmap option
- Make mmap read-write while keeping it as synchronous as possible
- Build writeback fid on mmap creation if it is writable

Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: remove useless assignment

There is no use of pointer 'fid' before the next assignment.

Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: remove unused 'super_block' struct pointer

Get rid of the useless '*sb' variable.

Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: make v9fs_cache_inode_{get,put,set}_cookie empty inlines for !9P_CACHEFS

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: 9p: use strlcpy instead of strncpy

For 'NULL' terminated string, recommend always to be ended by zero.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Remove the unused variable "err" in v9fs_vfs_getattr()

Delete the unused variable "err" in v9fs_vfs_getattr()

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: make sure ->lookup() adds fid to the right dentry

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: untangle ->lookup() a bit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: double iput() in ->lookup() if d_materialise_unique() fails

d_materialise_unique() does iput() itself.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: v9fs_fid_add() can't fail now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: Modify the stat structures to use kuid_t and kgid_t

9p has thre strucrtures that can encode inode stat information. Modify
all of those structures to contain kuid_t and kgid_t values. Modify
he wire encoders and decoders of those structures to use 'u' and 'g' instead of
'd' in the format string where uids and gids are present.

This results in all kuid and kgid conversion to and from on the wire values
being performed by the same code in protocol.c where the client is known
at the time of the conversion.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

fs/9p: Don't use O_TRUNC flag in TOPEN and TLOPEN request

We do the truncate via setattr request, hence don't pass the O_TRUNC flag in
open request. Without this patch we end up sending zero sized write request
to server when we try to truncate. Some servers (VirtFS) were not handling that
properly.

Reported-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: avoid debug OOPS when reading a long symlink

Reading a symlink longer than the given buffer, a p9_debug use would
try to print the link name (not NUL-terminated) using a %s format.
Use %.*s instead, and replace the strncpy+strnlen with functionally
equivalent strlen+memcpy.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

don't pass nameidata to ->create()

boolean "does it have to be exclusive?" flag is passed instead;
Local filesystem should just ignore it - the object is guaranteed
not to be there yet.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

stop passing nameidata to ->lookup()

Just the flags; only NFS cares even about that, but there are
legitimate uses for such argument. And getting rid of that
completely would require splitting ->lookup() into a couple
of methods (at least), so let's leave that alone for now...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

make finish_no_open() return int

namely, 1 ;-) That's what we want to return from ->atomic_open()
instances after finish_no_open().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

kill struct opendata

Just pass struct file *. Methods are happier that way...
There's no need to return struct file * from finish_open() now,
so let it return int. Next: saner prototypes for parts in
namei.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

make ->atomic_open() return int

Change of calling conventions:
old new
NULL 1
file 0
ERR_PTR(-ve) -ve

Caller *knows* that struct file *; no need to return it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

->atomic_open() prototype change - pass int * instead of bool *

... and let finish_open() report having opened the file via that sucker.
Next step: don't modify od->filp at all.

[AV: FILE_CREATE was already used by cifs; Miklos' fix folded]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: implement i_op->atomic_open()

Add an ->atomic_open implementation which replaces the atomic open+create
operation implemented via ->create. No functionality is changed.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: Rename end_writeback() to clear_inode()

After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

fs/9p: We should not allocate a new inode when creating hardlines.

Don't do new_inode_from fid in case of hardlink creation. This ensures
that link count for hardlink files get updated properly. Earlier link count
was not updated on removing a hardlink with cache mode enabled.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: v9fs_stat2inode should update suid/sgid bits.

Create a new helper that update the permission bits and use
that, instead of opencoding the logic.

Reported and bisected by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Reduce object size with CONFIG_NET_9P_DEBUG

Reduce object size by deduplicating formats.

Use vsprintf extension %pV.
Rename P9_DPRINTK uses to p9_debug, align arguments.
Add function for _p9_debug and macro to add __func__.
Add missing "\n"s to p9_debug uses.
Remove embedded function names as p9_debug adds it.
Remove P9_EPRINTK macro and convert use to pr_<level>.
Add and use pr_fmt and pr_<level>.

$ size fs/9p/built-in.o*
text data bss dec hex filename
62133 984 16000 79117 1350d fs/9p/built-in.o.new
67342 984 16928 85254 14d06 fs/9p/built-in.o.old
$ size net/9p/built-in.o*
text data bss dec hex filename
88792 4148 22024 114964 1c114 net/9p/built-in.o.new
94072 4148 23232 121452 1da6c net/9p/built-in.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: propagate umode_t

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: don't bother with unixmode2p9mode() for link() and symlink()

Pass perm to v9fs_vfs_mkspecial() instead of passing mode;
calculate in caller when done for mknod(), use known value for link()
and symlink(). As the result, we avoid a bit of work *and* stop
mixing mode_t with P9_DMLINK.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch ->mknod() to umode_t

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch ->create() to umode_t

vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch vfs_mkdir() and ->mkdir() to umode_t

vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: fix the stupidity with i_dentry in inode destructors

Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

filesystems: add set_nlink()

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fs/9p: inode file operation is properly initialized init_special_inode

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Always ask new inode in lookup for cache mode disabled

This make sure we don't end up reusing the unlinked inode object.
The ideal way is to use inode i_generation. But i_generation is
not available in userspace always.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

fs/9p: Add OS dependent open flags in 9p protocol

Some of the flags are OS/arch dependent we add a 9p
protocol value which maps to asm-generic/fcntl.h values in Linux
Based on the original patch from Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

fs/9p: Don't update file type when updating file attributes

We should only update attributes that we can change on stat2inode.
Also do file type initialization in v9fs_init_inode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Add fid before dentry instantiation

d_instantiate marks the dentry positive. So a parallel lookup and mkdir of
the directory can find dentry that doesn't have fid attached. This can result
in both the code path doing v9fs_fid_add which results in v9fs_dentry leak.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: add 9P2000.L unlinkat operation

unlinkat - Remove a directory entry

size[4] Tunlinkat tag[2] dirfid[4] name[s] flag[4]
size[4] Runlinkat tag[2]

older Tremove have the below request format

size[4] Tremove tag[2] fid[4]

The remove message is used to remove a directory entry either file or directory
The remove opreation is actually a directory opertation and should ideally have
dirfid, if not we cannot represent the fid on server with anything other than
name. We will have to derive the directory name from fid in the Tremove request.

NOTE: The operation doesn't clunk the unlink fid.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: add 9P2000.L renameat operation

renameat - change name of file or directory

size[4] Trenameat tag[2] olddirfid[4] oldname[s] newdirfid[4] newname[s]
size[4] Rrenameat tag[2]

older Trename have the below request format

size[4] Trename tag[2] fid[4] newdirfid[4] name[s]

The rename message is used to change the name of a file, possibly moving it
to a new directory. The rename opreation is actually a directory opertation
and should ideally have olddirfid, if not we cannot represent the fid on server
with anything other than name. We will have to derive the old directory name
from fid in the Trename request.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Always ask new inode in create

This make sure we don't end up reusing the unlinked inode object.
The ideal way is to use inode i_generation. But i_generation is
not available in userspace always.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: When doing inode lookup compare qid details and inode mode bits.

This make sure we don't use wrong inode from the inode hash. The inode number
of the file deleted is reused by the next file system object created
and if we only use inode number for inode hash lookup we could end up
with wrong struct inode.

Also compare inode generation number. Not all Linux file system provide
st_gen in userspace. So it could be 0;

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: remove rename work around in 9p

Now that VFS does the right thing remove the work around.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

no need to check for LOOKUP_OPEN in ->create() instances

... it will be set in nd->flag for all cases with non-NULL nd
(i.e. when called from do_last()).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

don't transliterate lower bits of ->intent.open.flags to FMODE_...

->create() instances are much happier that way...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: remove unnecessary dentry_unhash on rmdir, dir rename

9p has no problems with references to unlinked directories.

CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: push dentry_unhash on rename_dir into file systems

Only a few file systems need this. Start by pushing it down into each
rename method (except gfs2 and xfs) so that it can be dealt with on a
per-fs basis.

Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: push dentry_unhash on rmdir into file systems

Only a few file systems need this. Start by pushing it down into each
fs rmdir method (except gfs2 and xfs) so it can be dealt with on a per-fs
basis.

This does not change behavior for any in-tree file systems.

Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: Add v9fs_dentry2v9ses

Add the new static inline and use the same

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Attach writeback_fid on first open with WR flag

We don't need writeback fid if we are only doing O_RDONLY open

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Use truncate_setsize instead of vmtruncate

convert vmtruncate usage to truncate_setsize. We also writeback
all dirty pages before doing 9p operations and on success call truncate_setsize.
This ensure that we continue sanely on failed truncate on the server. The
disadvantage is that we are now going to write back the content that get
thrown away later as a part of truncate.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Fix race in initializing writeback fid

When two process open the same file we can end up with both of them
allocating the writeback_fid. Add a new mutex which can be used
for synchronizing v9fs_inode member values.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Writeback dirty data before setattr

change file attribute can result in making the file readonly.
So flush the dirty pages before that.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: call vmtruncate before setattr 9p opeation

We need to call vmtruncate before 9p setattr operation, otherwise we
could write back some dirty pages between setattr with ATTR_SIZE and vmtruncate
causing some truncated pages to be written back to server

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Properly update inode attributes on link

With caching enabled, we need to make sure we don't
update inode->i_size via stat2inode because we could
have dirty data which is not yet written to the server

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Workaround vfs rename rehash bug

This is similar to what ceph, ocfs2 and nfs does
http://kerneltrap.org/mailarchive/linux-fsdevel/2008/4/18/1498534

May be we should get vfs fixed

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Mark directory inode invalid for many directory inode operations

One successfull directory operation we would have changed directory
inode attribute. So mark them invalid

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: mark inode attribute invalid on rename, unlink and setattr

rename, unlink and setattr can result in update of inode attribute.
So mark the cached copy invalid

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Add support for marking inode attribute invalid

With cached mode some of the file system operation result
in updating inode attributes (ctime). Add support for
marking inode attribute invalid in such cases so that
we fetch the updated inode attribute on dentry revalidation.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Update link count correctly on different file system operations

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Move writeback fid to v9fs_inode

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Add v9fs_inode

Switch to the fscache code to v9fs_inode. We will later use
v9fs_inode in cache=loose mode to track the inode cache
validity timeout. Ie if we find an inode in cache older
that a specific jiffie range we will consider it stale

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Don't set stat.st_blocks based on nrpages

simple_getattr does set stat.st_blocks to a value
derived from nrpages. That is not correct with 9p

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Add inode hashing

We didn't add the inode to inode hash in 9p. We need to do that
to get sync to work, otherwise __mark_inode_dirty will not
add the inode to super block's dirty list.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Add fid to inode in cached mode

The fid attached to inode will be opened O_RDWR mode and is used
for dirty page writeback only.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: set fs cache cookie in create path also

We need to call v9fs_cache_inode_set_cookie in create
path also

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: set the cached file_operations struct during inode init

With the old code we were not setting the file->f_op
with cached file operations during creat.

(format correction by jvrao@linux.vnet.ibm.com)

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

switch 9p

here we actually *want* ->d_op for root; setting it allows to get rid
of kludge in v9fs_kill_super() since now we have proper ->d_release()
for root and don't need to call it manually.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: Don't set dentry->d_op in create routines

We do set dentry->d_op in lookup even in case of EOENT entries.
That implies we should have dentry->d_op already set when
create/mkdir/mknod/link/symlink routines are called

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Move dotl inode operations into a seperate file

Source Code Reorganization

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs: dcache per-inode inode alias locking

dcache_inode_lock can be replaced with per-inode locking. Use existing
inode->i_lock for this. This is slightly non-trivial because we sometimes
need to find the inode from the dentry, which requires d_inode to be
stabilised (either with refcount or d_lock).

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs: dcache reduce branches in lookup path

Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.

Patched with:

git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs: icache RCU free inodes

RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs: dcache remove dcache_lock

dcache_lock no longer protects anything. remove it.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs: scale inode alias list

Add a new lock, dcache_inode_lock, to protect the inode's i_dentry list
from concurrent modification. d_alias is also protected by d_lock.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs/9p: Use generic_file_open with lookup_instantiate_filp

We need to do O_LARGEFILE check even in case of 9p. Use the
generic_file_open helper

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Add missing iput in v9fs_vfs_lookup

Make sure we drop inode reference in the error path

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Use mknod 9p operation on create without open request

A create without LOOKUP_OPEN flag set is due to mknod of regular
files. Use mknod 9P operation for the same

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Implement TREADLINK operation for 9p2000.L

Synopsis

size[4] TReadlink tag[2] fid[4]
size[4] RReadlink tag[2] target[s]

Description
Readlink is used to return the contents of the symoblic link
referred by fid. Contents of symboic link is returned as a
response.

target[s] - Contents of the symbolic link referred by fid.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Implement create time inheritance

Inherit default ACL on create

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Update ACL on chmod

We need update the acl value on chmod

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Implement setting posix acl

This patch also update mode bits, as a normal file system.
I am not sure wether we should do that, considering that
a setxattr on the server will again update the ACL/mode value

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Implement POSIX ACL permission checking function

The ACL value is fetched as a part of inode initialization
from the server and the permission checking function use the
cached value of the ACL

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: mkdir fix for setting S_ISGID bit as per parent directory

The current implementation of 9p client mkdir function does not
set the S_ISGID mode bit for the directory being created if the
parent directory has this bit set. This patch fixes this problem
so that the newly created directory inherits the gid from parent
directory and not from the process creating this directory, when
the S_ISGID bit is set in parent directory.

Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: remove unneeded checks

git_t is unsigned an can never be less than zero.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

new helper: ihold()

Clones an existing reference to inode; caller must already hold one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: Don't use dotl version of mknod for dotu inode operations

We should not use dotlversion for the dotu inode operations

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Use the correct dentry operations

We should use the cached dentry operation only if caching mode is enabled

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p, net/9p: memory leak fixes

Four memory leak fixes in the 9P code.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

v9fs: fixup for inode_setattr being removed

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

convert remaining ->clear_inode() to ->evict_inode()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

remove inode_setattr

Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs/9p: remove sparse warning in vfs_inode

make v9fs_dentry_from_dir_inode static

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Prevent parallel rename when doing fid_lookup

During fid lookup we need to make sure that the dentry->d_parent doesn't
change so that we can safely walk the parent dentries. To ensure that
we need to prevent cross directory rename during fid_lookup. Add a
per superblock rename_sem rw_semaphore to prevent parallel fid lookup and
rename.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Add support user. xattr

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: This patch implements TLCREATE for 9p2000.L protocol.

SYNOPSIS

size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Implement TMKDIR

Implement TMKDIR as part of 2000.L Work

Synopsis

size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

size[4] Rmkdir tag[2] qid[13]

Description

mkdir asks the file server to create a directory with given name,
mode and gid. The qid for the new directory is returned with
the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Implement TMKNOD

Synopsis

size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

size[4] Rmknod tag[2] qid[13]

Description

mknod asks the file server to create a device node with given major and
minor number, mode and gid. The qid for the new device node is returned
with the mknod reply message.

[sripathik@in.ibm.com: Fix error handling code]

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Define and implement TSYMLINK for 9P2000.L

Create a symbolic link

SYNOPSIS

size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

size[4] Rsymlink tag[2] qid[13]

DESCRIPTION

Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Define and implement TLINK for 9P2000.L

This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink

SYNOPSIS

size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]

size[4] Rlink tag[2]

DESCRIPTION

Create a link 'newpath' in directory pointed by dfid linking to oldfid path.

[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Implement client side of setattr for 9P2000.L protocol.

SYNOPSIS

size[4] Tsetattr tag[2] attr[n]

size[4] Rsetattr tag[2]

DESCRIPTION

The setattr command changes some of the file status information.
attr resembles the iattr structure used in Linux kernel. It
specifies which status parameter is to be changed and to what
value. It is laid out as follows:

valid[4]
specifies which status information is to be changed. Possible
values are:
ATTR_MODE (1 << 0)
ATTR_UID (1 << 1)
ATTR_GID (1 << 2)
ATTR_SIZE (1 << 3)
ATTR_ATIME (1 << 4)
ATTR_MTIME (1 << 5)
ATTR_ATIME_SET (1 << 7)
ATTR_MTIME_SET (1 << 8)

The last two bits represent whether the time information
is being sent by the client's user space. In the absense
of these bits the server always uses server's time.

mode[4]
File permission bits

uid[4]
Owner id of file

gid[4]
Group id of the file

size[8]
File size

atime_sec[8]
Time of last file access, seconds

atime_nsec[8]
Time of last file access, nanoseconds

mtime_sec[8]
Time of last file modification, seconds

mtime_nsec[8]
Time of last file modification, nanoseconds

Explanation of the patches:
--------------------------

*) The kernel just copies relevent contents of iattr structure to
p9_iattr_dotl structure and passes it down to the client. The
only check it has is calling inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file
parameters because I don't think these are needed in our case.
The client user space can request updating just ctime by calling
chown(fd, -1, -1). This is handled on server side without a need
for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and
size of the file.
*) 9P RFC says "Either all the changes in wstat request happen, or
none of them does: if the request succeeds, all changes were made;
if it fails, none were."
I have not done anything to implement this specifically because I
don't see a reason.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: getattr client implementation for 9P2000.L protocol.

SYNOPSIS

size[4] Tgetattr tag[2] fid[4] request_mask[8]

size[4] Rgetattr tag[2] lstat[n]

DESCRIPTION

The getattr transaction inquires about the file identified by fid.
request_mask is a bit mask that specifies which fields of the
stat structure is the client interested in.

The reply will contain a machine-independent directory entry,
laid out as follows:

st_result_mask[8]
Bit mask that indicates which fields in the stat structure
have been populated by the server

qid.type[1]
the type of the file (directory, etc.), represented as a bit
vector corresponding to the high 8 bits of the file's mode
word.

qid.vers[4]
version number for given path

qid.path[8]
the file server's unique identification for the file

st_mode[4]
Permission and flags

st_uid[4]
User id of owner

st_gid[4]
Group ID of owner

st_nlink[8]
Number of hard links

st_rdev[8]
Device ID (if special file)

st_size[8]
Size, in bytes

st_blksize[8]
Block size for file system IO

st_blocks[8]
Number of file system blocks allocated

st_atime_sec[8]
Time of last access, seconds

st_atime_nsec[8]
Time of last access, nanoseconds

st_mtime_sec[8]
Time of last modification, seconds

st_mtime_nsec[8]
Time of last modification, nanoseconds

st_ctime_sec[8]
Time of last status change, seconds

st_ctime_nsec[8]
Time of last status change, nanoseconds

st_btime_sec[8]
Time of creation (birth) of file, seconds

st_btime_nsec[8]
Time of creation (birth) of file, nanoseconds

st_gen[8]
Inode generation

st_data_version[8]
Data version number

request_mask and result_mask bit masks contain the following bits
#define P9_STATS_MODE 0x00000001ULL
#define P9_STATS_NLINK 0x00000002ULL
#define P9_STATS_UID 0x00000004ULL
#define P9_STATS_GID 0x00000008ULL
#define P9_STATS_RDEV 0x00000010ULL
#define P9_STATS_ATIME 0x00000020ULL
#define P9_STATS_MTIME 0x00000040ULL
#define P9_STATS_CTIME 0x00000080ULL
#define P9_STATS_INO 0x00000100ULL
#define P9_STATS_SIZE 0x00000200ULL
#define P9_STATS_BLOCKS 0x00000400ULL

#define P9_STATS_BTIME 0x00000800ULL
#define P9_STATS_GEN 0x00001000ULL
#define P9_STATS_DATA_VERSION 0x00002000ULL

#define P9_STATS_BASIC 0x000007ffULL
#define P9_STATS_ALL 0x00003fffULL

This patch implements the client side of getattr implementation for
9P2000.L. It introduces a new structure p9_stat_dotl for getting
Linux stat information along with QID. The data layout is similar to
stat structure in Linux user space with the following major
differences:

inode (st_ino) is not part of data. Instead qid is.

device (st_dev) is not part of data because this doesn't make sense
on the client.

All time variables are 64 bit wide on the wire. The kernel seems to use
32 bit variables for these variables. However, some of the architectures
have used 64 bit variables and glibc exposes 64 bit variables to user
space on some architectures. Hence to be on the safer side we have made
these 64 bit in the protocol. Refer to the comments in
include/asm-generic/stat.h

There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
st_data_version apart from the bitmask, st_result_mask. The bit mask
is filled by the server to indicate which stat fields have been
populated by the server. Currently there is no clean way for the
server to obtain these additional fields, so it sends back just the
basic fields.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>

9p: Optimize TCREATE by eliminating a redundant fid clone.

This patch removes a redundant fid clone on the directory fid and hence
reduces a server transaction while creating new filesystem object.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: cleanup: remove unneeded assignment

We never use "v9ses" and so we can remove it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Add mksock support

Without this patch, an attempt to mksock will get an EINVAL.

Before this patch:
[root@localhost 1dir]# mksock mysock
mksock: error making mysock: Invalid argument

With this patch:
[root@localhost 1dir]# mksock mysock
[root@localhost 1dir]# ls -l mysock
s--------- 1 root root 0 2010-03-31 17:44 mysock

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: Make sure we properly instantiate dentry.

For lookup if we get ENOENT error from the server we still
instantiate the dentry. We need to make sure we have dentry
operations set in that case so that a later dput on the dentry
does the expected. Without the patch we get the below error

#ln -sf abc abclink
ln: creating symbolic link `abclink': No such file or directory

Now on the host do
$ touch abclink

Guest now gives ENOENT error.
# ls
ls: cannot access abclink: No such file or directory

Debugged-by:Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: replace inode uid,gid,mode initialization with helper function

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: add 9P2000.L rename operation

I made a V2 of this patch on top of my patches for VFS switches.
All the changes were due to change in some offsets.

rename - change name of file or directory

size[4] Trename tag[2] fid[4] newdirfid[4] name[s]
size[4] Rrename tag[2]

The rename message is used to change the name of a file, possibly moving it
to a new directory. The 9P wstat message can only rename a file within the
same directory.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: VFS switches for 9p2000.L: VFS switches

Implements VFS switches for 9p2000.L protocol.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Creating files with names too long should fail with ENAMETOOLONG.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: drop nlink remove

We need to drop the link count on the inode of a sucessfull remove

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

fs/9p: Add hardlink support to .u extension

For regular file and directories we put the link
count in th extension field in a tagged string format.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9P2010.L handshake: Add VFS flags

Add 9P2000.u and 9P2010.L protocol flags to V9FS VFS

This patch adds 9P2000.u and 9P2010.L protocol flags into V9FS VFS side code
and removes the single flag used for 'extended'.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Include fsync support for 9p client

Implement the fsync in the client side by marking stat field values to 'don't touch' so that server may
interpret it as a request to guarantee that the contents of the associated file are committed to stable
storage before the Rwstat message is returned.

Without this patch, calling fsync on a 9p file results in "Invalid argument" error. Please check the attached
C program.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Acked-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Kill 9p readlink()

For symlinks generic_readlink() will work just fine and for directories
we don't want ->readlink() at all.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

9p: fix readlink

I do not know if you've looked on the patch, but unfortunately it is
incorrect. A suggested better version is in this email (the old
version didn't work in case the user provided buffer was not long
enough - it incorrectly appended null byte on a position of last char,
and thus broke the contract of the readlink method). However, I'm
still not sure this is 100% correct thing to do, I think readlink is
supposed to return buffer without last null byte in all cases, but we
do return last null byte (even the old version).. on the other hand it
is likely unspecified what is in the remaining part of the buffer, so
null character may be fine there ;):

Signed-off-by: Martin Stava <martin.stava@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Add fscache support to 9p

This patch adds a persistent, read-only caching facility for
9p clients using the FS-Cache caching backend.

When the fscache facility is enabled, each inode is associated
with a corresponding vcookie which is an index into the FS-Cache
indexing tree. The FS-Cache indexing tree is indexed at 3 levels:
- session object associated with each mount.
- inode/vcookie
- actual data (pages)

A cache tag is chosen randomly for each session. These tags can
be read off /sys/fs/9p/caches and can be passed as a mount-time
parameter to re-attach to the specified caching session.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.

Change all occurrence of inode->i_size with i_size_read() or i_size_write()
as appropriate.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Add missing cast for the error return value in v9fs_get_inode

Cast the error return value (ENOMEM) in v9fs_get_inode() to its
correct type using ERR_PTR.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Fix possible memleak in v9fs_inode_from fid.

Add missing p9stat_free in v9fs_inode_from_fid to avoid
any possible leaks.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: minor comment fixes

Fix the comments -- mostly the improper and/or missing descriptions
of function parameters.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Fix possible inode leak in v9fs_get_inode.

Add a missing iput when cleaning up if v9fs_get_inode
fails after returning a valid inode.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Check for error in return value of v9fs_fid_add

Check if v9fs_fid_add was successful or not based on its
return value.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: convert d_iname references to d_name.name

d_iname is rubbish for long file names.
Use d_name.name in printks instead.

Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Remove potentially bad parameter from function entry debug print.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

CRED: Wrap task credential accesses in 9P2000 filesystem

Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Reviewed-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: v9fs-developer@lists.sourceforge.net
Signed-off-by: James Morris <jmorris@namei.org>

9p: fix device file handling

In v9fs_get_inode(), for block, as well as char devices (in theory),
the function init_special_inode() is called to set up callback functions
for file ops. this function uses the file mode's value to determine whether
to use block or char dev functions. In v9fs_inode_from_fid(), the function
p9mode2unixmode() is used, but for all devices it initially returns S_IFBLK,
then uses v9fs_get_inode() to initialise a new inode, then finally uses
v9fs_stat2inode(), which would determine whether the inode is a block or
character device. However, at that point init_special_inode() had already
decided to use the block device functions, so even if the inode's mode is
turned to a character device, the block functions are still used to operate
on them. The attached patch simply calls init_special_inode() again for devices
after parsing device node data in v9fs_stat2inode() so that the proper functions
are used.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: rework client code to use new protocol support functions

Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: use an IS_ERR test rather than a NULL test

In case of error, the function p9_client_walk returns an ERR pointer, but
never returns a NULL pointer. So a NULL test that comes after an IS_ERR
test should be deleted.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = p9_client_walk(...)
... when != x = E
* if (x != NULL)
S1 else S2
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

9p: fix O_APPEND in legacy mode

The legacy protocol's open operation doesn't handle an append operation
(it is expected that the client take care of it). We were incorrectly
passing the extended protocol's flag through even in legacy mode. This
was reported in bugzilla report #10689. This patch fixes the problem
by disallowing extended protocol open modes from being passed in legacy
mode and implemented append functionality on the client side by adding
a seek after the open.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Documentation updates

The kernel-doc comments of much of the 9p system have been in disarray since
reorganization. This patch fixes those problems, adds additional documentation
and a template book which collects the 9p information.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)

Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using:

perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security`

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: add support for sticky bit

GDM gets unhappy if /var/gdm doesn't have the sticky bit set. This patch adds
support for the sticky bit in much the same way setuid/setgid is supported.

With this patch, I can launch X from a v9fs rootfs (although I quickly run out
of fds in the server once gnome starts up).

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: v9fs_vfs_rename incorrect clunk order

In v9fs_vfs_rename function labels don't match the fids that are clunked.
The correct clunk order is clunking newdirfid first and then olddirfid next.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: attach-per-user

The 9P2000 protocol requires the authentication and permission checks to be
done in the file server. For that reason every user that accesses the file
server tree has to authenticate and attach to the server separately.
Multiple users can share the same connection to the server.

Currently v9fs does a single attach and executes all I/O operations as a
single user. This makes using v9fs in multiuser environment unsafe as it
depends on the client doing the permission checking.

This patch improves the 9P2000 support by allowing every user to attach
separately. The patch defines three modes of access (new mount option
'access'):

- attach-per-user (access=user) (default mode for 9P2000.u)
If a user tries to access a file served by v9fs for the first time, v9fs
sends an attach command to the server (Tattach) specifying the user. If
the attach succeeds, the user can access the v9fs tree.
As there is no uname->uid (string->integer) mapping yet, this mode works
only with the 9P2000.u dialect.

- allow only one user to access the tree (access=<uid>)
Only the user with uid can access the v9fs tree. Other users that attempt
to access it will get EPERM error.

- do all operations as a single user (access=any) (default for 9P2000)
V9fs does a single attach and all operations are done as a single user.
If this mode is selected, the v9fs behavior is identical with the current
one.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: rename uid and gid parameters

Change the names of 'uid' and 'gid' parameters to the more appropriate
'dfltuid' and 'dfltgid'. This also sets the default uid/gid to -2
(aka nfsnobody)

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: define session flags

Create more general flags field in the v9fs_session_info struct and move the
'extended' flag as a bit in the flags.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: cache meta-data when cache=loose

This patch expands the impact of the loose cache mode to allow for cached
metadata increasing the performance of directory listings and other metadata
read operations.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Reorganization of 9p file system code

This patchset moves non-filesystem interfaces of v9fs from fs/9p to net/9p.
It moves the transport, packet marshalling and connection layers to net/9p
leaving only the VFS related files in fs/9p. This work is being done in
preparation for in-kernel 9p servers as well as alternate 9p clients (other
than VFS).

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Detach sched.h from mm.h

First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
they don't need sched.h
b) sched.h stops being dependency for significant number of files:
on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
after patch it's only 3744 (-8.3%).

Cross-compile tested on

all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

header cleaning: don't include smp_lock.h when not used

Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

v9fs: don't use primary fid when removing file

v9fs_insert uses v9fs_fid_lookup (which also locks the fid) to get the
primary fid associated with the dentry and destroys the v9fs_fid struct
after removing the file. If another process called v9fs_fid_lookup on the
same dentry, it may wait undefinitely for the fid's lock (as the struct is
freed).

This patch changes v9fs_remove to use a cloned fid, so the primary fid is
not locked and freed.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@hera.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: implement optional loose read cache

While cacheing is generally frowned upon in the 9p world, it has its
place -- particularly in situations where the remote file system is
exclusive and/or read-only. The vacfs views of venti content addressable
store are a real-world instance of such a situation. To facilitate higher
performance for these workloads (and eventually use the fscache patches),
we have enabled a "loose" cache mode which does not attempt to maintain
any form of consistency on the page-cache or dcache. This results in over
two orders of magnitude performance improvement for cacheable block reads
in the Bonnie benchmark. The more aggressive use of the dcache also seems
to improve metadata operational performance.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

[PATCH] mark struct inode_operations const 1

Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] v9fs_vfs_mkdir(): fix a double free

Fix a double free of "dfid" introduced by commit
da977b2c7eb4d6312f063a7b486f2aad99809710 and spotted by the Coverity
checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] 9p: fix segfault caused by race condition in meta-data operations

Running dbench multithreaded exposed a race condition where fid structures
were removed while in use. This patch adds semaphores to meta-data operations
to protect the fid structure. Some cleanup of error-case handling in the
inode operations is also included.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] 9p: fix rename return code

9p doesn't handle renames between directories -- however, we were returning
EPERM instead of EXDEV when we detected this case.

Signed-off-by: Eric Van Hensbergren <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Function v9fs_get_idpool returns int, not u32 as called twice in fs/9p/vfs_inode.c

Function v9fs_get_idpool returns int, not u32. Actually it returns -1 on
errors, and these two callers check if the value is smaller than 0, which
was caught by gcc with extra warning flags. Compile tested only but should
be OK, as the value computed in v9fs_get_idpool() is also int.

Signed-of-by: Mika Kukkonen <mikukkon@iki.fi>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@lanl.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] r/o bind mount prepwork: inc_nlink() helper

This is mostly included for parity with dec_nlink(), where we will have some
more hooks. This one should stay pretty darn straightforward for now.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] inode-diet: Eliminate i_blksize from the inode structure

This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] 9p: fix fid behavior on failed remove

Based on a bug report from Russ Ross <russruss@gmail.com>

According to the spec:

"The remove request asks the file server both to remove the file
represented by fid and to clunk the fid, even if the remove fails."

but the Linux client seems to expect the fid to be valid after a failed
remove attempt. Specifically, I'm getting this behavior when attempting to
remove a non-empty directory.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix fid check in v9fs_create

Fix an incorrect check whether a fid was allocated in v9fs_create and if it
should be freed on error.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Remove needless checks in fs/9p/vfs_inode.c

coverity found two needless checks in vfs_inode.c (cid #1165 and #1164)
In both cases inode is always NULL when we goto error; either because it
is still initialized to NULL or is set to NULL explicitly. This patch
simply removes these checks to save some code.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@lanl.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] 9pfs: missing result check in v9fs_vfs_readlink() and v9fs_vfs_link()

__getname() may fail and return NULL (as pointed out by Coverity 437 &
1220).

Signed-off-by: Florin Malita <fmalita@gmail.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: <rminnich@lanl.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: signal handling fixes

Multiple races can happen when v9fs is interrupted by a signal and Tflush
message is sent to the server. After v9fs sends Tflush it doesn't wait
until it receives Rflush, and possibly the response of the original
message. This behavior may confuse v9fs what fids are allocated by the
file server.

This patch fixes the races and the fid allocation.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@hera.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: update license boilerplate

Update license boilerplate to specify GPLv2 and remove the (at your option
clause). This change was agreed to by all the copyright holders (approvals
can be found on v9fs-developer mailing list).

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix vfs_inode dereference before NULL check

__getname, which in turn will call kmem_cache_alloc, may return NULL.

Coverity bug #977

Signed-off-by: Eugene Teo <eugene.teo@eugeneteo.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: add extension field to Tcreate

Implement a new way of creating special files. Instead of Tcreate+Twstat,
add one more field to Tcreate that contains special file description.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: print 9p messages

Print 9p messages.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: assign dentry ops to negative dentries

If a file is not found in v9fs_vfs_lookup, the function creates negative
dentry, but doesn't assign any dentry ops. This leaves the negative entry
in the cache (there is no d_delete to mark it for removal). If the file is
created outside of the mounted v9fs filesystem, the file shows up in the
directory with weird permissions.

This patch assigns the default v9fs dentry ops to the negative dentry.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix for access to unitialized variables or freed memory

Miscellaneous fixes related to accessing uninitialized variables or memory
that was already freed.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix atomic create open

In order to assure atomic create+open v9fs stores the open fid produced by
v9fs_vfs_create in the dentry, from where v9fs_file_open retrieves it and
associates it with the open file.

This patch modifies v9fs to use nameidata.intent.open values to do the atomic
create+open.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: symlink support fixes

Two symlink fixes, v9fs_readlink didn't copy the last character of the
symlink name, v9fs_vfs_follow_link incorrectly called strlen of newly
allocated buffer instead of PATH_MAX.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: add readpage support

v9fs mmap support was originally removed from v9fs at Al Viro's request,
but recently there have been requests from folks who want readpage
functionality (primarily to enable execution of files mounted via 9P).
This patch adds readpage support (but not writepage which contained most of
the objectionable code). It passes fsx-linux (and other regressions) so it
should be relatively safe.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

spelling: s/retreive/retrieve/

Signed-off-by: Adrian Bunk <bunk@stusta.de>

[PATCH] v9fs: handle kthread_create failure, minor bugfixes

- remove unnecessary -ENOMEM assignments
- return correct value when buf_check_size for second time in a buffer
- handle failures when create_workqueue and kthread_create are called
- use kzalloc instead of kmalloc/memset 0
- v9fs_str_copy and v9fs_str_compare were buggy, were used only in one
place, correct the logic and move it to the place it is used.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: zero copy implementation

Performance enhancement reducing the number of copies in the data and
stat paths.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix fid management in v9fs_create

v9fs_create doesn't manage correctly the fids when it is called to create a
directory.. The fid created by the create 9P call (newfid) and the one
created by walking to already created file (wfidno) are not used
consistently.

This patch cleans up the usage of newfid and wfidno.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: new multiplexer implementation

New multiplexer implementation. Decreases the number of kernel threads
required. Better handling when the user process receives a signal.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix memory leak in v9fs dentry code

Assign the appropriate dentry operations to the dentry. Fixes memory leak.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] V9FS: 'names_cache' memory leak

Data allocated with "__getname()" should always be free'd with "__putname()"
because of the AUDITSYSCALL code.

Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com>
Cc: <rminnich@lanl.gov>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix races in fid allocation

Fid management cleanup. The patch attempts to fix the races in dentry's
fid management.

Dentries don't keep the opened fids anymore, they are moved to the file
structs. Ideally there should be no more than one fid with fidcreate equal
to zero in the dentry's list of fids.

v9fs_fid_create initializes the important fields (fid, fidcreated) before
v9fs_fid is added to the list. v9fs_fid_lookup returns only fids that are
not created by v9fs_create. v9fs_fid_get_created returns the fid created
by the same process by v9fs_create (if any) and removes it from dentry's
list

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: replace strlen on newly allocated by __getname buffers to PATH_MAX

v9fs_vfs_readlink allocates space for the link using __getname and
errorneously uses strlen on the newly allocated buffer to check if the buffer
passed by the user is bigger than the one returned by __getname.

The patch replaces the strlen usage to PATH_MAX, which is the actual size of
the buffers returned by __getname.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: readlink extended mode check

LANL reported some issues with random crashes during mount of legacy protocol
servers (9P2000 versus 9P2000.u) -- crash was always happening in readlink
(which should never happen in legacy mode). Added some sanity conditionals to
the get_inode code which should prevent the errors LANL was seeing. Code
tested benign through regression.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: Fix support for special files (devices, named pipes, etc.)

Fix v9fs special files (block, char devices) support.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: Clean-up vfs_inode and setattr functions

Cleanup code in v9fs vfs_inode as suggested by Alexey Dobriyan. Did some
major revamping of the v9fs setattr code to remove unnecessary allocations and
clean up some dead-code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: VFS inode operations

This part of the patch contains the VFS inode interfaces.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>