ext2: Drop GFP_NOFS use in ext2_get_blocks()

ext2_get_blocks() calls sb_issue_zeroout() with GFP_NOFS flag. However
the call is performed under inode->i_rwsem and
EXT2_I(inode)->i_truncate_mutex neither of which is acquired during
direct fs reclaim. So it is safe to change the gfp mask to GFP_KERNEL.

Signed-off-by: Jan Kara <jack@suse.cz>

fs: convert error_remove_page to error_remove_folio

There were already assertions that we were not passing a tail page to
error_remove_page(), so make the compiler enforce that by converting
everything to pass and use a folio.

Link: https://lkml.kernel.org/r/20231117161447.2461643-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ext2: convert to new timestamp accessors

Convert to using the new inode timestamp accessor functions.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-32-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

ext2: Fix kernel-doc warnings

Document a few parameters of ext2_alloc_blocks(). Redo the
alloc_new_reservation() and find_next_reservable_window() kernel-doc
entirely.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818201121.2720451-1-willy@infradead.org>

ext2: improve consistency of ext2_fsblk_t datatype usage

The ext2 block allocation/deallocation functions and their respective
calls use a mixture of unsigned long and ext2_fsblk_t datatypes to
index the desired ext2 block. This commit replaces occurrences of
unsigned long with ext2_fsblk_t, covering the functions
ext2_new_block(), ext2_new_blocks(), ext2_free_blocks(),
ext2_free_data() and ext2_free_branches(). This commit is rather
conservative, and only replaces unsigned long with ext2_fsblk_t if
the variable is used to index a specific ext2 block.

Signed-off-by: Georg Ottinger <g.ottinger@gmx.at>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230817195925.10268-1-g.ottinger@gmx.at>

ext2: introduce new flags argument for ext2_new_blocks()

This patch introduces a new flags argument for ext2_new_blocks() and also
a new EXT2_ALLOC_NORESERVE flag.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Message-Id: <20230815112612.221145-3-yebin10@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>

fs: pass the request_mask to generic_fillattr

generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.

Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.

Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

ext2: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-39-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

ext2: Move direct-io to use iomap

This patch converts ext2 direct-io path to iomap interface.
- This also takes care of DIO_SKIP_HOLES part in which we return -ENOTBLK
from ext2_iomap_begin(), in case if the write is done on a hole.
- This fallbacks to buffered-io in case of DIO_SKIP_HOLES or in case of
a partial write or if any error is detected in ext2_iomap_end().
We try to return -ENOTBLK in such cases.
- For any unaligned or extending DIO writes, we pass
IOMAP_DIO_FORCE_WAIT flag to ensure synchronous writes.
- For extending writes we set IOMAP_F_DIRTY in ext2_iomap_begin because
otherwise with dsync writes on devices that support FUA, generic_write_sync
won't be called and we might miss inode metadata updates.
- Since ext2 already now uses _nolock vartiant of sync write. Hence
there is no inode lock problem with iomap in this patch.
- ext2_iomap_ops are now being shared by DIO, DAX & fiemap path

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <610b672a52f2a7ff6dc550fd14d0f995806232a5.1682069716.git.ritesh.list@gmail.com>

ext2/dax: Fix ext2_setsize when len is page aligned

PAGE_ALIGN(x) macro gives the next highest value which is multiple of
pagesize. But if x is already page aligned then it simply returns x.
So, if x passed is 0 in dax_zero_range() function, that means the
length gets passed as 0 to ->iomap_begin().

In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on
here in ext2_get_blocks().
BUG_ON(maxblocks == 0);

Instead we should be calling dax_truncate_page() here which takes
care of it. i.e. it only calls dax_zero_range if the offset is not
page/block aligned.

This can be easily triggered with following on fsdax mounted pmem
device.

dd if=/dev/zero of=file count=1 bs=512
truncate -s 0 file

[79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff)
[93.793207] ------------[ cut here ]------------
[93.795102] kernel BUG at fs/ext2/inode.c:637!
[93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139
[93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610
<...>
[93.835298] Call Trace:
[93.836253] <TASK>
[93.837103] ? lock_acquire+0xf8/0x110
[93.838479] ? d_lookup+0x69/0xd0
[93.839779] ext2_iomap_begin+0xa7/0x1c0
[93.841154] iomap_iter+0xc7/0x150
[93.842425] dax_zero_range+0x6e/0xa0
[93.843813] ext2_setsize+0x176/0x1b0
[93.845164] ext2_setattr+0x151/0x200
[93.846467] notify_change+0x341/0x4e0
[93.847805] ? lock_acquire+0xf8/0x110
[93.849143] ? do_truncate+0x74/0xe0
[93.850452] ? do_truncate+0x84/0xe0
[93.851739] do_truncate+0x84/0xe0
[93.852974] do_sys_ftruncate+0x2b4/0x2f0
[93.854404] do_syscall_64+0x3f/0x90
[93.855789] entry_SYSCALL_64_after_hwframe+0x72/0xdc

CC: stable@vger.kernel.org
Fixes: 2aa3048e03d3 ("iomap: switch iomap_zero_range to use iomap_iter")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <046a58317f29d9603d1068b2bbae47c2332c17ae.1682069716.git.ritesh.list@gmail.com>

quota: port to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->set_acl() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->getattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->setattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

ext2: remove ->writepage

->writepage is a very inefficient method to write back data, and only
used through write_cache_pages or as a fallback when no ->migrate_folio
method is present.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

fs: pass dentry to set acl method

The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.

Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().

As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

ext2: remove nobh support

The nobh mode is an obscure feature to save lowlevel for large memory
32-bit configurations while trading for much slower performance and
has been long obsolete. Remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()

Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

attr: port attribute changes to new types

Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.

This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.

Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.

The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.

We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.

Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.

The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.

Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

quota: port quota helpers mount ids

Port the is_quota_modification() and dqout_transfer() helper to type
safe vfs{g,u}id_t. Since these helpers are only called by a few
filesystems don't introduce a new helper but simply extend the existing
helpers to pass down the mount's idmapping.

Note, that this is a non-functional change, i.e. nothing will have
happened here or at the end of this series to how quota are done! This
a change necessary because we will at the end of this series make
ownership changes easier to reason about by keeping the original value
in struct iattr for both non-idmapped and idmapped mounts.

For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.

This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.

Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.

Since struct iattr uses an anonymous union with overlapping types as
supported by the C standard, filesystems that haven't converted to
ia_vfs{g,u}id won't see any difference and things will continue to work
as before. In other words, no functional changes intended with this
change.

Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port to iattr ownership update helpers

Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.

For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.

This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.

Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.

No functional changes intended.

Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: Fix syntax errors in comments

Delete the redundant word 'not'.

Link: https://lore.kernel.org/r/20220605125509.14837-1-wangxiang@cdjrlc.com
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Jan Kara <jack@suse.cz>

fs: Convert mpage_readpage to mpage_read_folio

mpage_readpage still works in terms of pages, and has not been audited
for correctness with large folios, so include an assertion that the
filesystem is not passing it large folios. Convert all the filesystems
to call mpage_read_folio() instead of mpage_readpage().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

fs: Remove flags parameter from aops->write_begin

There are no more aop flags left, so remove the parameter.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

fs: Remove aop flags parameter from nobh_write_begin()

There are no more aop flags left, so remove the parameter.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

fs: Remove aop flags parameter from block_write_begin()

There are no more aop flags left, so remove the parameter.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

fs: ext2: Fix duplicate included linux/dax.h

Clean up the following includecheck warning:

fs/ext2/inode.c: linux/dax.h is included more than once.

No functional change.

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1648008123-32485-1-git-send-email-baihaowen@meizu.com

fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio

This is a mechanical change.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs

fs: Convert __set_page_dirty_buffers to block_dirty_folio

Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs

fs: Remove noop_invalidatepage()

We used to have to use noop_invalidatepage() to prevent
block_invalidatepage() from being called, but that behaviour is now gone.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs

fs: Turn block_invalidatepage into block_invalidate_folio

Remove special-casing of a NULL invalidatepage, since there is no
more block_invalidatepage.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs

fsdax: shift partition offset handling into the file systems

Remove the last user of ->bdev in dax.c by requiring the file system to
pass in an address that already includes the DAX offset. As part of the
only set ->bdev or ->daxdev when actually required in the ->iomap_begin
methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-27-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

fsdax: decouple zeroing from the iomap buffered I/O code

Unshare the DAX and iomap buffered I/O page zeroing code. This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code. Instead move these checks
into the callers. Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-19-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

ext2: use iomap_fiemap to implement ->fiemap

Switch from generic_block_fiemap to use the iomap version. The only
interesting part is that ext2_get_blocks gets confused when being
asked for overly long ranges, so copy over the limit to the inode
size from generic_block_fiemap into ext2_fiemap.

Link: https://lore.kernel.org/r/20210720133341.405438-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: make ext2_iomap_ops available unconditionally

ext2_iomap_ops will be used for the FIEMAP support going forward,
so make it available unconditionally.

Link: https://lore.kernel.org/r/20210720133341.405438-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Convert to using invalidate_lock

Ext2 has its private dax_sem used for synchronizing page faults and
truncation. Use mapping->invalidate_lock instead as it is meant for this
purpose.

CC: <linux-ext4@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

fs: remove noop_set_page_dirty()

Use __set_page_dirty_no_writeback() instead. This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future. It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.

[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]

Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: require ->set_page_dirty to be explicitly wired up

Remove the CONFIG_BLOCK default to __set_page_dirty_buffers and just wire
that method up for the missing instances.

[hch@lst.de: ecryptfs: add a ->set_page_dirty cludge]
Link: https://lkml.kernel.org/r/20210624125250.536369-1-hch@lst.de

Link: https://lkml.kernel.org/r/20210614061512.3966143-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: make helpers idmap mount aware

Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

stat: handle idmapped mounts

The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

acl: handle idmapped mounts

The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.

The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.

In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.

Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

attr: handle idmapped mounts

When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

ext2: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/73d8ae2d06d639815672ee9ee4550ea4bfa08489.1605896059.git.gustavoars@kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: remove duplicate include

Remove linux/fiemap.h which is included more than once

Link: https://lore.kernel.org/r/20200819025434.65763-1-wanghai38@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

ext2: fix some incorrect comments in inode.c

There are some incorrect comments in inode.c, so fix them
properly.

Link: https://lore.kernel.org/r/20200703124411.24085-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Jan Kara <jack@suse.cz>

fs: move the fiemap definitions out of fs.h

No need to pull the fiemap definitions into almost every file in the
kernel build.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs: convert mpage_readpages to mpage_readahead

Implement the new readahead aop and convert all callers (block_dev,
exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6,
reiserfs & udf).

The callers are all trivial except for GFS2 & OCFS2.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax: Pass dax_dev instead of bdev to dax_writeback_mapping_range()

As of now dax_writeback_mapping_range() takes "struct block_device" as a
parameter and dax_dev is searched from bdev name. This also involves taking
a fresh reference on dax_dev and putting that reference at the end of
function.

We are developing a new filesystem virtio-fs and using dax to access host
page cache directly. But there is no block device. IOW, we want to make
use of dax but want to get rid of this assumption that there is always
a block device associated with dax_dev.

So pass in "struct dax_device" as parameter instead of bdev.

ext2/ext4/xfs are current users and they already have a reference on
dax_device. So there is no need to take reference and drop reference to
dax_device on each call of this function.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200103183307.GB13350@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

ext2: check err when partial != NULL

Check err when partial == NULL is meaningless because
partial == NULL means getting branch successfully without
error.

CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Jan Kara <jack@suse.cz>

iomap: use a srcmap for a read-modify-write I/O

The srcmap is used to identify where the read is to be performed from.
It is passed to ->iomap_begin, which can fill it in if we need to read
data for partially written blocks from a different location than the
write target. The srcmap is only supported for buffered writes so far.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as
srcmap if not set, adjust length down to srcmap end as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>

ext2: Always brelse bh on failure in ext2_iget()

All but one bail out paths in ext2_iget() is releasing bh. Move the
releasing of bh into a common error handling code.

Signed-off-by: Jan Kara <jack@suse.cz>

ext2: add missing brelse() in ext2_iget()

Add missing brelse() on error path of ext2_iget().

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Fix a typo in ext2_getattr argument

Fix a typo in a ext2_getattr argument

Signed-off-by: Fumiya Shigemitsu <shfy1014@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Adjust the comment of function ext2_alloc_branch

The name of argument is error in the header comment.
@num should be @indirect_blks.
At the same time, there was a lack of description of the two parameters
@blks and @goal.
This commit therefore fixes this header comment.

Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: support statx syscall

Since statx, every filesystem should fill the attributes/attributes_mask
in routine getattr. But the generic_fillattr has not fill that, so add
ext2_getattr to do this. This can fix generic/424 while testing ext2.

Reviewed-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Fix a typo in comment

Fix a typo in ext2_get_blocks comment.

Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Annotate implicit fall through in __ext2_truncate_blocks

There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1).

This commit removes the following warnings:

fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2, dax: set ext2_dax_aops for dax files

Sync syscall to DAX file needs to flush processor cache, but it
currently does not flush to existing DAX files. This is because
'ext2_da_aops' is set to address_space_operations of existing DAX
files, instead of 'ext2_dax_aops', since S_DAX flag is set after
ext2_set_aops() in the open path.

Similar to ext4, change ext2_iget() to initialize i_flags before
ext2_set_aops().

Fixes: fb094c90748f ("ext2, dax: introduce ext2_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: use ktime_get_real_seconds for timestamps

get_seconds() is deprecated because of the y2038 overflow, so users
should migrate to 64-bit timestamps using ktime_get_real_seconds().
In ext2, the timestamps in the superblock and in the inode are all
limited to 32-bit, and this won't get fixed, so let's just stop
using the deprecated interface and keep truncating.

All users of ext2 should migrate to ext4 before 2038 to prevent this
from causing problems.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: fix a block leak

open file, unlink it, then use ioctl(2) to make it immutable or
append only. Now close it and watch the blocks *not* freed...

Immutable/append-only checks belong in ->setattr().
Note: the bug is old and backport to anything prior to 737f2e93b972
("ext2: convert to use the new truncate convention") will need
these checks lifted into ext2_setattr().

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2, dax: introduce ext2_dax_aops

In preparation for the dax implementation to start associating dax pages
to inodes via page->mapping, we need to provide a 'struct
address_space_operations' instance for dax. Otherwise, direct-I/O
triggers incorrect page cache assumptions and warnings.

Reviewed-by: Jan Kara <jack@suse.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iomap: Switch from blkno to disk offset

Replace iomap->blkno, the sector number, with iomap->addr, the disk
offset in bytes. For invalid disk offsets, use the special value
IOMAP_NULL_ADDR instead of IOMAP_NULL_BLOCK.

This allows to use iomap for mappings which are not block aligned, such
as inline data on ext4.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> # iomap, xfs
Reviewed-by: Jan Kara <jack@suse.cz>

ext2: perform dax_device lookup at mount

The ->iomap_begin() operation is a hot path, so cache the
fs_dax_get_by_host() result at mount time to avoid the incurring the
hash lookup overhead on a per-i/o basis.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

ext2: Fix memory leak when truncate races ext2_get_blocks

Buffer heads referencing indirect blocks may not be released if the file
is truncated at the right time. This happens because ext2_get_branch()
returns NULL when it finds the whole chain of indirect blocks already
set, and when truncate alters the chain this value of NULL is
treated as the address of the last head to be released. Handle this in the
same way as it's done after the got_it label.

Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

dax, xfs, ext4: compile out iomap-dax paths in the FS_DAX=n case

Tetsuo reports:

fs/built-in.o: In function `xfs_file_iomap_end':
xfs_iomap.c:(.text+0xe0ef9): undefined reference to `put_dax'
fs/built-in.o: In function `xfs_file_iomap_begin':
xfs_iomap.c:(.text+0xe1a7f): undefined reference to `dax_get_by_host'
make: *** [vmlinux] Error 1
$ grep DAX .config
CONFIG_DAX=m
# CONFIG_DEV_DAX is not set
# CONFIG_FS_DAX is not set

When FS_DAX=n we can/must throw away the dax code in filesystems.
Implement 'fs_' versions of dax_get_by_host() and put_dax() that are
nops in the FS_DAX=n case.

Cc: <linux-xfs@vger.kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Fixes: ef51042472f5 ("block, dax: move 'select DAX' from BLOCK to FS_DAX")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

ext2, ext4, xfs: retrieve dax_device for iomap operations

In preparation for converting fs/dax.c to use dax_direct_access()
instead of bdev_direct_access(), add the plumbing to retrieve the
dax_device associated with a given block_device.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

ext2: Remove ext2_get_inode_flags()

Now that all places setting inode->i_flags that should be reflected in
on-disk flags are gone, we can remove ext2_get_inode_flags() call.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Call dquot_writeback_dquots() with s_umount held

ext2_sync_fs() could be called without s_umount semaphore held when
called through ext2_write_super() from __ext2_write_inode(). This
function then calls dquot_writeback_dquots() which relies on s_umount to
be held for protection against other quota operations.

In fact __ext2_write_inode() does not need all the functionality
ext2_write_super() provides. It is enough to just write the superblock.
So use ext2_sync_super() instead.

Fixes: 9d1ccbe70e0b14545caad12dc73adb3605447df0
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>

iomap: constify struct iomap_ops

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

ext2: Return BH_New buffers for zeroed blocks

So far we did not return BH_New buffers from ext2_get_blocks() when we
allocated and zeroed-out a block for DAX inode to avoid racy zeroing in
DAX code. This zeroing is gone these days so we can remove the
workaround.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

ext2: reject inodes with negative size

Don't load an inode with a negative size; this causes integer overflow
problems in the VFS.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: use iomap_zero_range() for zeroing truncated page in DAX path

Currently the last user of ext2_get_blocks() for DAX inodes was
dax_truncate_page(). Convert that to iomap_zero_range() so that all DAX
IO uses the iomap path.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext2: Use clean_bdev_aliases() instead of iteration

Use clean_bdev_aliases() instead of iterating through blocks one by one.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>

ext2: avoid bogus -Wmaybe-uninitialized warning

On ARM, we get this false-positive warning since the rework of
the ext2_get_blocks interface:

fs/ext2/inode.c: In function 'ext2_get_block':
include/linux/buffer_head.h:340:16: error: 'bno' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The calling conventions for this function are rather complex, and it's
not surprising that the compiler gets this wrong, I spent a long time
trying to understand how it all fits together myself.

This change to avoid the warning makes sure the compiler sees that we
always set 'bno' pointer whenever we have a positive return code.
The transformation is correct because we always arrive at the 'got_it'
label with a positive count that gets used as the return value, while
any branch to the 'cleanup' label has a negative or zero 'err'.

Fixes: 6750ad71986d ("ext2: stop passing buffer_head to ext2_get_blocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: fix possible integer truncation in ext2_iomap_begin

For 32-bit architectures we need to cast first_block to u64 before
shifting it left.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps

CURRENT_TIME_SEC is not y2038 safe. current_time() will
be transitioned to use 64 bit time along with vfs in a
separate patch.
There is no plan to transistion CURRENT_TIME_SEC to use
y2038 safe time interfaces.

current_time() will also be extended to use superblock
range checking parameters when range checking is introduced.

This works because alloc_super() fills in the the s_time_gran
in super block to NSEC_PER_SEC.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2: Unmap metadata when zeroing blocks

When zeroing blocks for DAX allocations, we also have to unmap aliases
in the block device mappings. Otherwise writeback can overwrite zeros
with stale data from block device page cache.

Signed-off-by: Jan Kara <jack@suse.cz>

fs: Give dentry to inode_change_ok() instead of inode

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: use iomap to implement DAX

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

ext2: stop passing buffer_head to ext2_get_blocks

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

ext2: fix filesystem deadlock while reading corrupted xattr block

This bug can be reproducible with fsfuzzer, although, I couldn't reproduce it
100% of my tries, it is quite easily reproducible.

During the deletion of an inode, ext2_xattr_delete_inode() does not check if the
block pointed by EXT2_I(inode)->i_file_acl is a valid data block, this might
lead to a deadlock, when i_file_acl == 1, and the filesystem block size is 1024.

In that situation, ext2_xattr_delete_inode, will load the superblock's buffer
head (instead of a valid i_file_acl block), and then lock that buffer head,
which, ext2_sync_super will also try to lock, making the filesystem deadlock in
the following stack trace:

root 17180 0.0 0.0 113660 660 pts/0 D+ 07:08 0:00 rmdir
/media/test/dir1

[<ffffffff8125da9f>] __sync_dirty_buffer+0xaf/0x100
[<ffffffff8125db03>] sync_dirty_buffer+0x13/0x20
[<ffffffffa03f0d57>] ext2_sync_super+0xb7/0xc0 [ext2]
[<ffffffffa03f10b9>] ext2_error+0x119/0x130 [ext2]
[<ffffffffa03e9d93>] ext2_free_blocks+0x83/0x350 [ext2]
[<ffffffffa03f3d03>] ext2_xattr_delete_inode+0x173/0x190 [ext2]
[<ffffffffa03ee9e9>] ext2_evict_inode+0xc9/0x130 [ext2]
[<ffffffff8123fd23>] evict+0xb3/0x180
[<ffffffff81240008>] iput+0x1b8/0x240
[<ffffffff8123c4ac>] d_delete+0x11c/0x150
[<ffffffff8122fa7e>] vfs_rmdir+0xfe/0x120
[<ffffffff812340ee>] do_rmdir+0x17e/0x1f0
[<ffffffff81234dd6>] SyS_rmdir+0x16/0x20
[<ffffffff81838cf2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
[<ffffffffffffffff>] 0xffffffffffffffff

Fix this by using the same approach ext4 uses to test data blocks validity,
implementing ext2_data_block_valid.

An another possibility when the superblock is very corrupted, is that i_file_acl
is 1, block_count is 1 and first_data_block is 0. For such situations, we might
have i_file_acl pointing to a 'valid' block, but still step over the superblock.
The approach I used was to also test if the superblock is not in the range
described by ext2_data_block_valid() arguments

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

dax: use sb_issue_zerout instead of calling dax_clear_sectors

dax_clear_sectors() cannot handle poisoned blocks. These must be
zeroed using the BIO interface instead. Convert ext2 and XFS to use
only sb_issue_zerout().

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
[vishal: Also remove the dax_clear_sectors function entirely]
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

ext2: Avoid DAX zeroing to corrupt data

Currently ext2 zeroes any data blocks allocated for DAX inode however it
still returns them as BH_New. Thus DAX code zeroes them again in
dax_insert_mapping() which can possibly overwrite the data that has been
already stored to those blocks by a racing dax_io(). Avoid marking
pre-zeroed buffers as new.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

ext2: Fix block zeroing in ext2_get_blocks() for DAX

When zeroing allocated blocks for DAX, we accidentally zeroed only the
first allocated block instead of all of them. So far this problem is
hidden by the fact that page faults always need only a single block and
DAX write code zeroes blocks again. But the zeroing in DAX code is racy
and needs to be removed so fix the zeroing in ext2 to zero all allocated
blocks.

Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

direct-io: eliminate the offset argument to ->direct_IO

Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually
work, so eliminate the superflous argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dax: move writeback calls into the filesystems

Previously calls to dax_writeback_mapping_range() for all DAX filesystems
(ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range().

dax_writeback_mapping_range() needs a struct block_device, and it used
to get that from inode->i_sb->s_bdev. This is correct for normal inodes
mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw
block devices and for XFS real-time files.

Instead, call dax_writeback_mapping_range() directly from the filesystem
->writepages function so that it can supply us with a valid block
device. This also fixes DAX code to properly flush caches in response
to sync(2).

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax: give DAX clearing code correct bdev

dax_clear_blocks() needs a valid struct block_device and previously it
was using inode->i_sb->s_bdev in all cases. This is correct for normal
inodes on mounted ext2, ext4 and XFS filesystems, but is incorrect for
DAX raw block devices and for XFS real-time devices.

Instead, rename dax_clear_blocks() to dax_clear_sectors(), and change
its arguments to take a bdev and a sector instead of an inode and a
block. This better reflects what the function does, and it allows the
filesystem and raw block device code to pass in an appropriate struct
block_device.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2, ext4: only set S_DAX for regular inodes

When S_DAX is set on an inode we assume that if there are pages attached
to the mapping (mapping->nrpages != 0), those pages are clean zero pages
that were used to service reads from holes. Any dirty data associated
with the inode should be in the form of DAX exceptional entries
(mapping->nrexceptional) that is written back via
dax_writeback_mapping_range().

With the current code, though, this isn't always true. For example,
ext2 and ext4 directory inodes can have S_DAX set, but have their dirty
data stored as dirty page cache entries. For these types of inodes,
having S_DAX set doesn't really make sense since their I/O doesn't
actually happen through the DAX code path.

Instead, only allow S_DAX to be set for regular inodes for ext2 and
ext4. This allows us to have strict DAX vs non-DAX paths in the
writeback code.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

don't put symlink bodies in pagecache into highmem

kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.

new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases. page_follow_link_light()
instrumented to yell about anything missed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2: Add locking for DAX faults

Add locking to ensure that DAX faults are isolated from ext2 operations
that modify the data blocks allocation for an inode. This is intended to
be analogous to the work being done in XFS by Dave Chinner:

http://www.spinics.net/lists/linux-fsdevel/msg90260.html

Compared with XFS the ext2 case is greatly simplified by the fact that ext2
already allocates and zeros new blocks before they are returned as part of
ext2_get_block(), so DAX doesn't need to worry about getting unmapped or
unwritten buffer heads.

This means that the only work we need to do in ext2 is to isolate the DAX
faults from inode block allocation changes. I believe this just means that
we need to isolate the DAX faults from truncate operations.

The newly introduced dax_sem is intended to replicate the protection
offered by i_mmaplock in XFS. In addition to truncate the i_mmaplock also
protects XFS operations like hole punching, fallocate down, extent
manipulation IOCTLS like xfs_ioc_space() and extent swapping. Truncate is
the only one of these operations supported by ext2.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.com>

dax: move DAX-related functions to a new header

In order to handle the !CONFIG_TRANSPARENT_HUGEPAGES case, we need to
return VM_FAULT_FALLBACK from the inlined dax_pmd_fault(), which is
defined in linux/mm.h. Given that we don't want to include <linux/mm.h>
in <linux/fs.h>, the easiest solution is to move the DAX-related
functions to a new header, <linux/dax.h>. We could also have moved
VM_FAULT_* definitions to a new header, or a different header that isn't
quite such a boil-the-ocean header as <linux/mm.h>, but this felt like
the best option.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: Handle error from dquot_initalize()

dquot_initialize() can now return error. Handle it where possible.

Signed-off-by: Jan Kara <jack@suse.com>

ext2: use simple_follow_link()

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dax: unify ext2/4_{dax,}_file_operations

The original dax patchset split the ext2/4_file_operations because of the
two NULL splice_read/splice_write in the dax case.

In the vfs if splice_read/splice_write are NULL we then call
default_splice_read/write.

What we do here is make generic_file_splice_read aware of IS_DAX() so the
original ext2/4_file_operations can be used as is.

For write it appears that iter_file_splice_write is just fine. It uses
the regular f_op->write(file,..) or new_sync_write(file, ...).

Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

VFS: normal filesystems (and lustre): d_inode() annotations

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

direct_IO: remove rw from a_ops->direct_IO()

Now that no one is using rw, remove it completely.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

direct_IO: use iov_iter_rw() instead of rw everywhere

The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Remove rw from dax_{do_,}io()

And use iov_iter_rw() instead.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Remove rw from {,__,do_}blockdev_direct_IO()

Most filesystems call through to these at some point, so we'll start
here.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: move struct kiocb to fs.h

struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2: get rid of most mentions of XIP in ext2

To help people transition, accept the 'xip' mount option (and report it in
/proc/mounts), but print a message encouraging people to switch over to
the 'dax' option.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: remove ext2_aops_xip

We shouldn't need a special address_space_operations any more

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: remove xip.c and xip.h

These files are now empty, so delete them

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: remove ext2_use_xip

Replace ext2_use_xip() with test_opt(XIP) which expands to the same code

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: remove get_xip_mem

All callers of get_xip_mem() are now gone. Remove checks for it,
initialisers of it, documentation of it and the only implementation of it.
Also remove mm/filemap_xip.c as it is now empty. Also remove
documentation of the long-gone get_xip_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax,ext2: replace xip_truncate_page with dax_truncate_page

It takes a get_block parameter just like nobh_truncate_page() and
block_truncate_page()

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax,ext2: replace ext2_clear_xip_target with dax_clear_blocks

This is practically generic code; other filesystems will want to call it
from other places, but there's nothing ext2-specific about it.

Make it a little more generic by allowing it to take a count of the number
of bytes to zero rather than fixing it to a single page. Thanks to Dave
Hansen for suggesting that I need to call cond_resched() if zeroing more
than one page.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax,ext2: replace XIP read and write with DAX I/O

Use the generic AIO infrastructure instead of custom read and write
methods. In addition to giving us support for AIO, this adds the missing
locking between read() and truncate().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs,ext2: introduce IS_DAX(inode)

Use an inode flag to tag inodes which should avoid using the page cache.
Convert ext2 to use it instead of mapping_is_xip(). Prevent I/Os to files
tagged with the DAX flag from falling back to buffered I/O.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

switch {__,}blockdev_direct_IO() to iov_iter

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

get rid of pointless iov_length() in ->direct_IO()

all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

pass iov_iter to ->direct_IO()

unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

mm + fs: store shadow entries in page cache

Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2/3/4: use generic posix ACL infrastructure

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2: Fix fs corruption in ext2_get_xip_mem()

Commit 8e3dffc651cb "Ext2: mark inode dirty after the function
dquot_free_block_nodirty is called" unveiled a bug in __ext2_get_block()
called from ext2_get_xip_mem(). That function called ext2_get_block()
mistakenly asking it to map 0 blocks while 1 was intended. Before the
above mentioned commit things worked out fine by luck but after that commit
we started returning that we allocated 0 blocks while we in fact
allocated 1 block and thus allocation was looping until all blocks in
the filesystem were exhausted.

Fix the problem by properly asking for one block and also add assertion
in ext2_get_blocks() to catch similar problems.

Reported-and-tested-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

truncate: drop 'oldsize' truncate_pagecache() parameter

truncate_pagecache() doesn't care about old size since commit
cedabed49b39 ("vfs: Fix vmtruncate() regression"). Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aio: don't include aio.h in sched.h

Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: Fix BUG_ON in evict() on inode deletion

Commit 8e3dffc6 introduced a regression where deleting inode with
large extended attributes leads to triggering
BUG_ON(inode->i_state != (I_FREEING | I_CLEAR))
in fs/inode.c:evict(). That happens because freeing of xattr block
dirtied the inode and it happened after clear_inode() has been called.

Fix the issue by moving removal of xattr block into ext2_evict_inode()
before clear_inode() call close to a place where data blocks are
truncated. That is also more logical place and removes surprising
requirement that ext2_free_blocks() mustn't dirty the inode.

Reported-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Ext2: free memory allocated and forget buffer head when io error happens

Add a necessary check when an io error happens.
If io error happens,free the memory allocated and forget
buffer head.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Implement freezing

The only missing piece to make freezing work reliably with ext2 is to
stop iput() of unlinked inode from deleting the inode on frozen filesystem.
So add a necessary protection to ext2_evict_inode().

We also provide appropriate ->freeze_fs and ->unfreeze_fs functions.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

userns: Convert ext2 to use kuid/kgid where appropriate.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

vfs: Rename end_writeback() to clear_inode()

After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

ext2/3/4: delete unneeded includes of module.h

Delete any instances of include module.h that were not strictly
required. In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jan Kara <jack@suse.cz>

filesystems: add set_nlink()

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fs: simplify the blockdev_direct_IO prototype

Simple filesystems always pass inode->i_sb_bdev as the block device
argument, and never need a end_io handler. Let's simply things for
them and for my grepping activity by dropping these arguments. The
only thing not falling into that scheme is ext4, which passes and
end_io handler without needing special flags (yet), but given how
messy the direct I/O code there is use of __blockdev_direct_IO
in one instead of two out of three cases isn't going to make a large
difference anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: move inode_dio_wait calls into ->setattr

Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand. This means filesystem-specific locks to prevent
new dio referenes from appearing can be held. This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

block: remove per-queue plugging

Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

ext2: fixed typo.

"excpet"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Jan Kara <jack@suse.cz>

fs: add sync_inode_metadata

Add a new helper to write out the inode using the writeback code,
that is including the correct dirty bit and list manipulation. A few
of filesystems already opencode this, and a lot of others should be
using it instead of using write_inode_now which also writes out the
data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2: fix a typo on comment in ext2/inode.c

'excpet' should be 'except'.
'ext3_get_branch' should be 'ext2_get_branch'.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

merge ext2 delete_inode and clear_inode, switch to ->evict_inode()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Take dirtying the inode to callers of ext2_free_blocks()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

check ATTR_SIZE contraints in inode_change_ok

Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.

As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.

Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.

Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

rename generic_setattr

Despite its name it's now a generic implementation of ->setattr, but
rather a helper to copy attributes from a struct iattr to the inode.
Rename it to setattr_copy to reflect this fact.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

get rid of block_write_begin_newtrunc

Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.

While we're at it also remove several unused arguments to block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

clean up write_begin usage for directories in pagecache

For filesystem that implement directories in pagecache we call
block_write_begin with an already allocated page for this code, while the
normal regular file write path uses the default block_write_begin behaviour.

Get rid of the __foofs_write_begin helper and opencode the normal write_begin
call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for
the directory code. The added benefit is that foofs_prepare_chunk has
a much saner calling convention.

Note that the interruptible flag passed into block_write_begin is always
ignored if we already pass in a page (see next patch for details), and
we never were doing truncations of exessive blocks for this case either so we
can switch directly to block_write_begin_newtrunc.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

get rid of nobh_write_begin_newtrunc

Move the call to vmtruncate to get rid of accessive blocks to the only
remaining caller and rename the non-truncating version to nobh_write_begin.

Get rid of the superflous file argument to it while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sort out blockdev_direct_IO variants

Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway. Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fix truncate inode time modification breakage

mtime and ctime should be changed only if the file size has actually
changed. Patches changing ext2 and tmpfs from vmtruncate to new truncate
sequence has caused regressions where they always update timestamps.

There is some strange cases in POSIX where truncate(2) must not update
times unless the size has acutally changed, see 6e656be89.

This area is all still rather buggy in different ways in a lot of
filesystems and needs a cleanup and audit (ideally the vfs will provide
a simple attribute or call to direct all filesystems exactly which
attributes to change). But coming up with the best solution will take a
while and is not appropriate for rc anyway.

So fix recent regression for now.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2: convert to use the new truncate convention.

I also have commented a possible bug in existing ext2 code, marked with XXX.

Cc: linux-ext4@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

quota: unify quota init condition in setattr

Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>

BKL: Remove BKL from ext2 filesystem

The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.

If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Add ext2_sb_info s_lock spinlock

Add a spinlock that protects against concurrent modifications of
s_mount_state, s_blocks_last, s_overhead_last and the content of the
superblock's buffer pointed to by sbi->s_es. The spinlock is now used in
ext2_xattr_update_super_block() which was setting the
EXT2_FEATURE_COMPAT_EXT_ATTR flag on the superblock without protection
before. Likewise the spinlock is used in ext2_show_options() to have a
consistent view of the mount options.

This is a preparation patch for removing the BKL from ext2 in the next
patch.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>

pass writeback_control to ->write_inode

This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dquot: cleanup dquot initialize routine

Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

dquot: move dquot initialization responsibility into the filesystem

Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.

For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.

For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.

Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

dquot: cleanup dquot transfer routine

Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2: Unify log messages in ext2

make messages produced by ext2 more unified. It should be
easy to parse.

dmesg before patch:
[ 4893.684892] reservations ON
[ 4893.684896] xip option not supported
[ 4893.684961] EXT2-fs warning: mounting ext3 filesystem as ext2
[ 4893.684964] EXT2-fs warning: maximal mount count reached, running
e2fsck is recommended
[ 4893.684990] EXT II FS: 0.5b, 95/08/09, bs=1024, fs=1024, gc=2,
bpg=8192, ipg=1280, mo=80010]

dmesg after patch:
[ 4893.684892] EXT2-fs (loop0): reservations ON
[ 4893.684896] EXT2-fs (loop0): xip option not supported
[ 4893.684961] EXT2-fs (loop0): warning: mounting ext3 filesystem as
ext2
[ 4893.684964] EXT2-fs (loop0): warning: maximal mount count reached,
running e2fsck is recommended
[ 4893.684990] EXT2-fs (loop0): 0.5b, 95/08/09, bs=1024, fs=1024, gc=2,
bpg=8192, ipg=1280, mo=80010]

Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Reviewed-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Jan Kara <jack@suse.cz>

HWPOISON: Enable .remove_error_page for migration aware file systems

Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.

I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.

Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?

Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ext2: Update comment about generic_osync_inode

We rely on generic_write_sync() now.

CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>

switch ext2 to inode->i_acl

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch ext2 to simple_fsync()

kill ext2_sync_file() (along with ext2/fsync.c), get rid of
ext2_update_inode() - it's an alias of ext2_write_inode().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2: fix data corruption for racing writes

If two writers allocating blocks to file race with each other (e.g.
because writepages races with ordinary write or two writepages race with
each other), ext2_getblock() can be called on the same inode in parallel.
Before we are going to allocate new blocks, we have to recheck the block
chain we have obtained so far without holding truncate_mutex. Otherwise
we could overwrite the indirect block pointer set by the other writer
leading to data loss.

The below test program by Ying is able to reproduce the data loss with ext2
on in BRD in a few minutes if the machine is under memory pressure:

long kMemSize = 50 << 20;
int kPageSize = 4096;

int main(int argc, char **argv) {
int status;
int count = 0;
int i;
char *fname = "/mnt/test.mmap";
char *mem;
unlink(fname);
int fd = open(fname, O_CREAT | O_EXCL | O_RDWR, 0600);
status = ftruncate(fd, kMemSize);
mem = mmap(0, kMemSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
// Fill the memory with 1s.
memset(mem, 1, kMemSize);
sleep(2);
for (i = 0; i < kMemSize; i++) {
int byte_good = mem[i] != 0;
if (!byte_good && ((i % kPageSize) == 0)) {
//printf("%d ", i / kPageSize);
count++;
}
}
munmap(mem, kMemSize);
close(fd);
unlink(fname);

if (count > 0) {
printf("Running %d bad page\n", count);
return 1;
}
return 0;
}

Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: Use lowercase names of quota functions

Use lowercase names of quota functions instead of old uppercase ones.

Signed-off-by: Jan Kara <jack@suse.cz>
CC: linux-ext4@vger.kernel.org

ext2: fix ext2_splice_branch() comments

There is no argument named @chain in ext2_splice_branch, remove references
to it.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: ensure fast symlinks are NUL-terminated

Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

generic block based fiemap implementation

Any block based fs (this patch includes ext3) just has to declare its own
fiemap() function and then call this generic function with its own
get_block_t. This works well for block based filesystems that will map
multiple contiguous blocks at one time, but will work for filesystems that
only map one block at a time, you will just end up with an "extent" for each
block. One gotcha is this will not play nicely where there is hole+data
after the EOF. This function will assume its hit the end of the data as soon
as it hits a hole after the EOF, so if there is any data past that it will
not pick that up. AFAIK no block based fs does this anyway, but its in the
comments of the function anyway just in case.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org

vfs: pagecache usage optimization for pagesize!=blocksize

When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.

I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment. Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.

So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate. This can
reduce read IO and improve system throughput.

I wrote a benchmark program and got result number with this program.

This benchmark do:

1: mount and open a test file.

2: create a 512MB file.

3: close a file and umount.

4: mount and again open a test file.

5: pwrite randomly 300000 times on a test file. offset is aligned
by IO size(1024bytes).

6: measure time of preading randomly 100000 times on a test file.

The result was:
2.6.26
330 sec

2.6.26-patched
226 sec

Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB

On ext3/4, a file is written through buffer/block. So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment. This test result
showed this.

The benchmark program is as follows:

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>

#define LEN 1024
#define LOOP 1024*512 /* 512MB */

main(void)
{
unsigned long i, offset, filesize;
int fd;
char buf[LEN];
time_t t1, t2;

if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
memset(buf, 0, LEN);
fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
for (i = 0; i < LOOP; i++)
write(fd, buf, LEN);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
fd = open("/root/test1/testfile", O_RDWR);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}

filesize = LEN * LOOP;
for (i = 0; i < 300000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pwrite(fd, buf, LEN, offset);
}
printf("start test\n");
time(&t1);
for (i = 0; i < 100000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pread(fd, buf, LEN, offset);
}
time(&t2);
printf("%ld sec\n", t2-t1);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
}

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: use ext2_fsblk_t type

Use ext2_fsblk_t type for filesystem-wide blocks number

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: use ext2_group_first_block_no()

Use ext2_group_first_block_no() and assign the return values to
ext2_fsblk_t variables.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xip: support non-struct page backed memory

Convert XIP to support non-struct page backed memory, using VM_MIXEDMAP for
the user mappings.

This requires the get_xip_page API to be changed to an address based one.
Improve the API layering a little bit too, while we're here.

This is required in order to support XIP filesystems on memory that isn't
backed with struct page (but memory with struct page is still supported too).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext*: spelling fix prefered -> preferred

Spelling fix: prefered -> preferred

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>

iget: stop EXT2 from using iget() and read_inode()

Stop the EXT2 filesystem from using iget() and read_inode(). Replace
ext2_read_inode() with ext2_iget(), and call that instead of iget().
ext2_iget() then uses iget_locked() directly and returns a proper error code
instead of an inode in the event of an error.

ext2_fill_super() returns any error incurred when getting the root inode
instead of EINVAL.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext[234]: remove unused argument for ext[234]_find_goal()

The argument chain for ext[234]_find_goal() is not used. This patch removes
it and fixes comment as well.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

BKL-removal: remove incorrect BKL comment in ext2

No BKL used anywhere, so don't mention it.

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2 reservations

Val's cross-port of the ext3 reservations code into ext2.

[mbligh@mbligh.org: Small type error for printk
[akpm@linux-foundation.org: fix types, sync with ext3]
[mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3]
[akpm@linux-foundation.org: kill noisy printk]
[akpm@linux-foundation.org: remember to dirty the gdp's block]
[akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a]
[akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969]
[akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e]
[akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6]
[akpm@linux-foundation.org: fixes]
[cmm@us.ibm.com: fix reservation extension]
[bunk@stusta.de: make ext2_get_blocks() static]
[hugh@veritas.com: fix hang]
[hugh@veritas.com: ext2_new_blocks should reset the reservation window size]
[hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end]
[hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such]
[hugh@veritas.com: rbtree usage cleanup]
[pbadari@us.ibm.com: Fix for ext2 reservation]
[bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()]
[hugh@veritas.com: ext2 balloc: use io_error label]
Cc: "Martin J. Bligh" <mbligh@mbligh.org>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove unused bh in calls to ext234_get_group_desc

ext[234]_get_group_desc never tests the bh argument, and only sets it if it
is passed in; it is perfectly happy with a NULL bh argument. But, many
callers send one in and never use it. May as well call with NULL like
other callers who don't use the bh.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: restore nobh

Implement nobh in new aops. This is a bit tricky. FWIW, nobh_truncate is
now implemented in a way that does not create blocks in sparse regions,
which is a silly thing for it to have been doing (isn't it?)

ext2 survives fsx and fsstress. jfs is converted as well... ext3
should be easy to do (but not done yet).

[akpm@linux-foundation.org: coding-style fixes]
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: convert to new aops

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext3: copy i_flags to inode flags on write

Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into
ext2-specific i_flags. Hence, when someone sets these flags via a different
interface than ioctl, they are stored correctly.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2/3/4: fix file date underflow on ext2 3 filesystems on 64 bit systems

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=5079

signed long ranges from -2.147.483.648 to 2.147.483.647 on x86 32bit

10000011110110100100111110111101 .. -2,082,844,739
10000011110110100100111110111101 .. 2,212,122,557 <- this currently gets
stored on the disk but when converting it to a 64bit signed long value it loses
its sign and becomes positive.

Cc: Andreas Dilger <adilger@dilger.ca>
Cc: <linux-ext4@vger.kernel.org>

Andreas says:

This patch is now treating timestamps with the high bit set as negative
times (before Jan 1, 1970). This means we lose 1/2 of the possible range
of timestamps (lopping off 68 years before unix timestamp overflow -
now only 30 years away :-) to handle the extremely rare case of setting
timestamps into the distant past.

If we are only interested in fixing the underflow case, we could just
limit the values to 0 instead of storing negative values. At worst this
will skew the timestamp by a few hours for timezones in the far east
(files would still show Jan 1, 1970 in "ls -l" output).

That said, it seems 32-bit systems (mine at least) allow files to be set
into the past (01/01/1907 works fine) so it seems this patch is bringing
the x86_64 behaviour into sync with other kernels.

On the plus side, we have a patch that is ready to add nanosecond timestamps
to ext3 and as an added bonus adds 2 high bits to the on-disk timestamp so
this extends the maximum date to 2242.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] inode-diet: Eliminate i_blksize from the inode structure

This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mark address_space_operations const

Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove ->get_blocks() support

Now that get_block() can handle mapping multiple disk blocks, no need to have
->get_blocks(). This patch removes fs specific ->get_blocks() added for DIO
and makes it users use get_block() instead.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Direct Migration V9: Avoid writeback / page_migrate() method

Migrate a page with buffers without requiring writeback

This introduces a new address space operation migratepage() that may be used
by a filesystem to implement its own version of page migration.

A version is provided that migrates buffers attached to pages. Some
filesystems (ext2, ext3, xfs) are modified to utilize this feature.

The swapper address space operation are modified so that a regular
migrate_page() will occur for anonymous pages without writeback (migrate_pages
forces every anonymous page to have a swap entry).

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Test for sb_getblk return value

This patch adds tests for the return value of sb_getblk() in the ext2/3
filesystems. In fs/buffer.c it is stated that the getblk() function never
fails. However, it does can return NULL in some situations due to I/O
errors, which may lead us to NULL pointer dereferences

Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] update filesystems for new delete_inode behavior

Update the file systems in fs/ implementing a delete_inode() callback to
call truncate_inode_pages(). One implementation note: In developing this
patch I put the calls to truncate_inode_pages() at the very top of those
filesystems delete_inode() callbacks in order to retain the previous
behavior. I'm guessing that some of those could probably be optimized.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] xip: ext2: execute in place

These are the ext2 related parts. Ext2 now uses the xip_* file operations
along with the get_xip_page aop when mounted with -o xip.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext2 corruption - regression between 2.6.9 and 2.6.10

Whilst trying to stress test a Promise SX8 card, we stumbled across
some nasty filesystem corruption in ext2. Our tests involved
creating an ext2 partition, mounting, running several concurrent
fsx's over it, umounting, and fsck'ing, all scripted[1]. The fsck
would always return with errors.

This regression was traced back to a change between 2.6.9 and
2.6.10, which moves the functionality of ext2_put_inode into
ext2_clear_inode. The attached patch reverses this change, and
eliminated the source of corruption.

Mingming Cao <cmm@us.ibm.com> said:

I think his patch for ext2 is correct. The corruption on ext3 is not the same
issue he saw on ext2. I believe that's the race between discard reservation
and reservation in-use that we already fixed it in 2.6.12- rc1.

For the problem related to ext2, at the time when we design reservation for
ext3, we decide we only need to discard the reservation at the last file
close, so we have ext3_discard_reservation on iput_final- >ext3_clear_inode.

The ext2 handle discard preallocation differently at that time, it discard the
preallocation at each iput(), not in input_final(), so we think it's
unnecessary to thrash it so frequently, and the right thing to do, as we did
for ext3 reservation, discard preallocation on last iput(). So we moved the
ext2_discard_preallocation from ext2_put_inode(0 to ext2_clear_inode.

Since ext2 preallocation is doing pre-allocation on disk, so it is possible
that at the unmount time, someone is still hold the reference of the inode, so
the preallocation for a file is not discard yet, so we still mark those blocks
allocated on disk, while they are not actually in the inode's block map, so
fsck will catch/fix that error later.

This is not a issue for ext3, as ext3 reservation(pre-allocation) is done in
memory.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!