Searched hist:190579 (Results 1 - 18 of 18) sorted by relevance
/freebsd-11-stable/sys/dev/malo/ | ||
H A D | if_malo.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
/freebsd-11-stable/sys/net80211/ | ||
H A D | ieee80211_ioctl.h | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | ieee80211_hostap.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | ieee80211_sta.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | ieee80211_freebsd.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | ieee80211_proto.h | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | ieee80211_node.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | ieee80211_var.h | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | ieee80211_output.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
/freebsd-11-stable/sys/dev/ral/ | ||
H A D | rt2661.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | rt2560.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
/freebsd-11-stable/sys/dev/usb/wlan/ | ||
H A D | if_zyd.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | if_ural.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
H A D | if_rum.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
/freebsd-11-stable/sys/dev/ipw/ | ||
H A D | if_ipw.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
/freebsd-11-stable/sys/dev/iwi/ | ||
H A D | if_iwi.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
/freebsd-11-stable/sys/dev/iwn/ | ||
H A D | if_iwn.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
/freebsd-11-stable/sys/dev/ath/ | ||
H A D | if_ath.c | diff 190579 Mon Mar 30 20:06:57 MDT 2009 sam Hoist 802.11 encapsulation up into net80211: o call ieee80211_encap in ieee80211_start so frames passed down to drivers are already encapsulated o remove ieee80211_encap calls in drivers o fixup wi so it recreates the 802.3 head it requires from the 802.11 header contents o move fast-frame aggregation from ath to net80211 (conditional on IEEE80211_SUPPORT_SUPERG): - aggregation is now done in ieee80211_start; it is enabled when the packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames are held on a staging queue according to ieee80211_ffagemax (net.wlan.ffagemax) to wait for a frame to combine with - drivers must call back to age/flush the staging queue (ath does this on tx done, at swba, and on rx according to the state of the tx queues and/or the contents of the staging queue) - remove fast-frame-related data structures from ath - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle per-node fast-frames state (we reuse 11n tx ampdu state) o change ieee80211_encap calling convention to include an explicit vap so frames coming through a WDS vap are recognized w/o setting M_WDS With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames. Reviewed by: thompsa, rpaulo, avatar, imp, sephe |
Completed in 704 milliseconds