PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

s/littel/little/ mainly in copy pasted comments.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.147.2;
Build in full debug symbols by default.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

The config files supported by this port are regened from this template.
Apply the changes which I previously made directly to the config files by
mistake.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.138.2; 1.138.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Disable svr4 and svr4_32 on sparc, sparc64 and amiga - the only places
where they were still enabled.

Remove TCP_COMPAT_42 from the config files. Pass 1.

branches: 1.132.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.129.2; 1.129.4;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.125.2;
Use COPTS="-O2 -fno-reorder-blocks" for kernels except INSTALL_CONFIGURATION.

Disable X-Surf devices for DRACO's configuration.

- ne at xsh requires ax88190 and ax88190 requires mii(4),
but all mii devices are declared only inside AMIGA_CONFIGURATION
- X-Surf also add wdc(4) but all children devices like atabus and
atapibus are declared only for AMIGA_CONFIGURATION

XXX: DRACO kernel is not built during build.sh release.

branches: 1.123.2;
Implement the probe procedure for ACA500. Now the user just needs acafh0
compiled in his kernel and it all should(tm) work.

Due to lack of obio in amiga port, the probe is called directly from mbattach().
This is going to change with the introduction of obio for all non-autoconfig
expansions.

Changes to ACA500 support:
- Add support for second (aux) CF slot.
- Rework wdc attachment to be more sane.
- Add support for clockport on ACA500.
- Fix style where appropriate.

Add preliminary support for the Individual Computers ACA500 in the form of acahf
driver. If ACA500 is equipped with supported accelerator with MMU, it allows
running NetBSD on an Amiga 500.

Since ACA is not autoconf-aware, and the probe procedure does not exist yet, the
driver is activated with the ACA500_SUPPORT kernel option. The acahf driver
is commented out in the GENERIC kernel for now (at least until it stops being
very experimental and hackish).

When it comes to ACA-specific hardware, for now the boot CF slot works. Support for everything else is incoming...

Nuke long dead NKPTADD and NKPTADDSHIFT options from config files.

Add the new xsh(4) driver to GENERIC.in template.

G/C PFIL_HOOKS from the kernel configs.

branches: 1.117.2;
remove obsolete networking options

Add slhci at zbus (Thylacine) and some USB HID devices.

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Include two MII PHY drivers, as needed by certain PCMCIA network cards.
More PHY drivers should be added when needed.

Add forgotten atabus at ata. Needed for satalink.

Add em4k(4).

Add empm(4) driver to config files.

Argh, commited wrong file. Add z3rambd.

Enable wdc at xsurf, remove WDC_NO_IDS (phx@ confirmed it's not needed).

Add (commented out for now) driver for X-Surf IDE.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.103.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

Don't enable wsmouse in a non-WSCONS kernel.

Enable empb in GENERIC, fix build, rearrange files.amiga.

Add a driver for Elbox Mediator 1200 PCI bridges. This is still a work in
progress, but now it is good enough to drive a NE2000 card. Support for
memory space accesses will be added soon(ish).

- Split X-Surf driver from if_ne_zbus, rework, add support for clockports present on X-Surf boards.
- Add gencp(4), a driver for generic clockports (it just needs a base address).

Approved by phx.

Add clockport(4) layer, which provides support for expansion bus present on
Amiga-style clockports. Also add a1k2cp(4) backend driver and the first
clockport device driver com_ss, that supports com(4) on clockport(4)
(particurarly Individual Computers SilverSurfer). Disabled by default,
since probe procedure is not written yet.

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.96.2; 1.96.6; 1.96.8;
Add voodoofb support. Allows using 3Dfx Voodoo 3 in G-REX as a console.

Don\'t forget to disable atabus* when disabling the efa driver.

User reported that efa driver attached when FastATA hardware was absent, but 4x EIDE splitter was present. Disable efa in GENERIC until problem is solved and/or better probe function is written.

Tons of enchancements to MD PCI code:
- The G-REX 4000 and G-REX 1200 are now really supported and working (still only 1st slot but the rest are a matter of time).
- Add bridge identification to p5pb, simplifies the driver and make it more user-friendly.
- Retire P5PB_GENFB and P5PB_OLD_FIRMWARE options, these are now handled automatically, depending on used hardware and firmware.
- Add PCI bus reconfiguration support to p5pb (PCI_NETBSD_CONFIGURE), allows using G-REX without boot to AmigaOS.
- Bring p5pb registers desription up to date with my knowledge.
- Add a lot of debugging code to p5pb (enabled by P5PB_DEBUG kernel option).
- Fix PCI_NETBSD_CONFIGURE in mppb (now it really works).
- Fix quirk handling in zbus.
- Update GENERIC.in and regen the kernel configs.
- Misc cleanup.

Add cv3dpb, a driver for CyberVision64/3D PCI bridge, which was split from p5pb.

Changes to Phase5 hardware support:
- Rework p5pb driver - simplify, cleanup, make more flexible.
- Add p5membar driver, which handles PCI resources autoconfigured by the firmware.
- Introduce intermediate p5bus layer, between zbus and CSPPC/BPPC on-board devices (p5pb, cbiiisc, bppcsc).
- Add experimental G-REX support to p5pb (first slot support only).
- Split CV64/3D PCI bridge support into separate cv3dpb driver (to be committed later).

Approved by phx.

Add putter device to generic kernels.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Amiga wscons/Xorg support, first phase.
Implemented wscons for CV64 and CV64/3D. Other graphics cards drivers are
prepared for it, but will not be attempted before Xorg is not running.
The wscons support is disabled by default. A GENERIC kernel should behave
like always. Use WSCONS to try out a kernel with wscons support.
Done by rkujawa@ and phx@.

branches: 1.87.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.86.2;
Enable efa in GENERIC.

Add driver for ELBOX FastATA 1200 Mk-III/Mk-IV (and the man page).

Minor changes to Amiga PCI MD code:
- Add bus enumeration and resource assignment (PCI_NETBSD_CONFIGURE) to mppb(4) - no more need to run AmigaOS to configure the bus.
- Add PCI configuration address register to p5pb(4).
- Add PCI I/O space support to p5pb(4).
- Move common code from p5pb(4) and mppb(4) to new pci_machdep.c file.
- Fix style.

Add driver for Prometheus PCI bridge.
Change approved by phx.

Add basic PCI support for amiga port.
Add missing bus_space(9) methods needed for MI PCI.
Add p5pb(4) - Phase5 PCI bridge driver (and the man page).
Add quirks table to zbus(4) - needed for p5pb.
Change approved by phx.

Fix DRACO kernel breakage introduced by my previous commit.

Add Bluetooth stack to Amiga. Tested with 3Com 3CRWB6096B on an A1200. Change approved by phx.

dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.77.2; 1.77.4;
Driver for BlizzardPPC 603e+ SCSI host adatper.
Patch submitted by Radoslaw Kujawa.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.73.2; 1.73.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Add COMPAT_50.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.69.2;
Enable fss(4) in not only GENERIC but also all !INSTALL kernels (i.e. DRACO).

Add accept filters to a proper file, as _READ_ME_FIRST_ claims.

Move "options WAPBL" so that it also gets added to INSTALL kernels.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.65.6; 1.65.10; 1.65.12; 1.65.16;
Remove systrace. Ok core@.

branches: 1.64.2; 1.64.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.62.2; 1.62.6;
wdc frontent for the buddha and catweazle Z2 hardware. From an old prototype
by me which was never committed due to lack of testers, adopted to 4.99 and
fixed by Frank Wille.

Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.60.2; 1.60.4; 1.60.8;
The option COMPAT_AOUT_M68K now requires COMPAT_40 (recent mount changes),
so make sure to define COMPAT_40 too.

Grr, do the addition of pseudo-device agr the right way

branches: 1.58.2; 1.58.8; 1.58.10; 1.58.16; 1.58.18;
Remove tmpfs's experimental status. OK'ed by core@.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

branches: 1.56.2; 1.56.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.53.2;
Add CARP to further platforms

ok christos, julian coleman and matthew green

branches: 1.52.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.51.2; 1.51.4; 1.51.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.49.2;
Add uncommented file-system UDF for generated config GENERIC files.

branches: 1.48.2; 1.48.4;
Add veriexec stuff to the common config file.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Add (commented out) file-system TMPFS in a proper file.

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.37.2;
Add PTYFS (commented out) in the correct form.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add wsmux.

branches: 1.34.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

add SMBFS/nsmb, per PR port-amiga/29066 by Florian Stoehr

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.28.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.27.2;
No more idesc please - we use the wdc driver.

Add COMPAT_BSDPTY on all the kernels that have COMPAT options.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.18.2;
Add wsfont pseudo-device.

With this the custom font loading code isn't needed and is removed.

Replace an IBM-encoded wsfont with ISO-encoded one

Add atabus

added wsmouse

add COMPAT_15/COMPAT_16

This was missing pseudo-device ksyms. Pointed out by J. Andberg.

branches: 1.12.2;
make /dev/reload optional. (It is only implemented for a.out kernels at the
moment.)

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added a commented out cgd(4).

add SYSTRACE here; pointed out by lukem

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF

branches: 1.2.2; 1.2.4;
Ensure INSTALL media has PIPE_SOCKETPAIR, MALLOC_NOINLINE and VNODE_OP_NOINLINE

branches: 1.1.2;
Use m4 instead of cpp to generate the various kernel configurations,
since cpp is the "C compiler pre-processor", and as such, isn't really
suited to parsing non-C-language files...

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

s/littel/little/ mainly in copy pasted comments.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.147.2;
Build in full debug symbols by default.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

The config files supported by this port are regened from this template.
Apply the changes which I previously made directly to the config files by
mistake.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.138.2; 1.138.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Disable svr4 and svr4_32 on sparc, sparc64 and amiga - the only places
where they were still enabled.

Remove TCP_COMPAT_42 from the config files. Pass 1.

branches: 1.132.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.129.2; 1.129.4;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.125.2;
Use COPTS="-O2 -fno-reorder-blocks" for kernels except INSTALL_CONFIGURATION.

Disable X-Surf devices for DRACO's configuration.

- ne at xsh requires ax88190 and ax88190 requires mii(4),
but all mii devices are declared only inside AMIGA_CONFIGURATION
- X-Surf also add wdc(4) but all children devices like atabus and
atapibus are declared only for AMIGA_CONFIGURATION

XXX: DRACO kernel is not built during build.sh release.

branches: 1.123.2;
Implement the probe procedure for ACA500. Now the user just needs acafh0
compiled in his kernel and it all should(tm) work.

Due to lack of obio in amiga port, the probe is called directly from mbattach().
This is going to change with the introduction of obio for all non-autoconfig
expansions.

Changes to ACA500 support:
- Add support for second (aux) CF slot.
- Rework wdc attachment to be more sane.
- Add support for clockport on ACA500.
- Fix style where appropriate.

Add preliminary support for the Individual Computers ACA500 in the form of acahf
driver. If ACA500 is equipped with supported accelerator with MMU, it allows
running NetBSD on an Amiga 500.

Since ACA is not autoconf-aware, and the probe procedure does not exist yet, the
driver is activated with the ACA500_SUPPORT kernel option. The acahf driver
is commented out in the GENERIC kernel for now (at least until it stops being
very experimental and hackish).

When it comes to ACA-specific hardware, for now the boot CF slot works. Support for everything else is incoming...

Nuke long dead NKPTADD and NKPTADDSHIFT options from config files.

Add the new xsh(4) driver to GENERIC.in template.

G/C PFIL_HOOKS from the kernel configs.

branches: 1.117.2;
remove obsolete networking options

Add slhci at zbus (Thylacine) and some USB HID devices.

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Include two MII PHY drivers, as needed by certain PCMCIA network cards.
More PHY drivers should be added when needed.

Add forgotten atabus at ata. Needed for satalink.

Add em4k(4).

Add empm(4) driver to config files.

Argh, commited wrong file. Add z3rambd.

Enable wdc at xsurf, remove WDC_NO_IDS (phx@ confirmed it's not needed).

Add (commented out for now) driver for X-Surf IDE.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.103.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

Don't enable wsmouse in a non-WSCONS kernel.

Enable empb in GENERIC, fix build, rearrange files.amiga.

Add a driver for Elbox Mediator 1200 PCI bridges. This is still a work in
progress, but now it is good enough to drive a NE2000 card. Support for
memory space accesses will be added soon(ish).

- Split X-Surf driver from if_ne_zbus, rework, add support for clockports present on X-Surf boards.
- Add gencp(4), a driver for generic clockports (it just needs a base address).

Approved by phx.

Add clockport(4) layer, which provides support for expansion bus present on
Amiga-style clockports. Also add a1k2cp(4) backend driver and the first
clockport device driver com_ss, that supports com(4) on clockport(4)
(particurarly Individual Computers SilverSurfer). Disabled by default,
since probe procedure is not written yet.

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.96.2; 1.96.6; 1.96.8;
Add voodoofb support. Allows using 3Dfx Voodoo 3 in G-REX as a console.

Don\'t forget to disable atabus* when disabling the efa driver.

User reported that efa driver attached when FastATA hardware was absent, but 4x EIDE splitter was present. Disable efa in GENERIC until problem is solved and/or better probe function is written.

Tons of enchancements to MD PCI code:
- The G-REX 4000 and G-REX 1200 are now really supported and working (still only 1st slot but the rest are a matter of time).
- Add bridge identification to p5pb, simplifies the driver and make it more user-friendly.
- Retire P5PB_GENFB and P5PB_OLD_FIRMWARE options, these are now handled automatically, depending on used hardware and firmware.
- Add PCI bus reconfiguration support to p5pb (PCI_NETBSD_CONFIGURE), allows using G-REX without boot to AmigaOS.
- Bring p5pb registers desription up to date with my knowledge.
- Add a lot of debugging code to p5pb (enabled by P5PB_DEBUG kernel option).
- Fix PCI_NETBSD_CONFIGURE in mppb (now it really works).
- Fix quirk handling in zbus.
- Update GENERIC.in and regen the kernel configs.
- Misc cleanup.

Add cv3dpb, a driver for CyberVision64/3D PCI bridge, which was split from p5pb.

Changes to Phase5 hardware support:
- Rework p5pb driver - simplify, cleanup, make more flexible.
- Add p5membar driver, which handles PCI resources autoconfigured by the firmware.
- Introduce intermediate p5bus layer, between zbus and CSPPC/BPPC on-board devices (p5pb, cbiiisc, bppcsc).
- Add experimental G-REX support to p5pb (first slot support only).
- Split CV64/3D PCI bridge support into separate cv3dpb driver (to be committed later).

Approved by phx.

Add putter device to generic kernels.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Amiga wscons/Xorg support, first phase.
Implemented wscons for CV64 and CV64/3D. Other graphics cards drivers are
prepared for it, but will not be attempted before Xorg is not running.
The wscons support is disabled by default. A GENERIC kernel should behave
like always. Use WSCONS to try out a kernel with wscons support.
Done by rkujawa@ and phx@.

branches: 1.87.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.86.2;
Enable efa in GENERIC.

Add driver for ELBOX FastATA 1200 Mk-III/Mk-IV (and the man page).

Minor changes to Amiga PCI MD code:
- Add bus enumeration and resource assignment (PCI_NETBSD_CONFIGURE) to mppb(4) - no more need to run AmigaOS to configure the bus.
- Add PCI configuration address register to p5pb(4).
- Add PCI I/O space support to p5pb(4).
- Move common code from p5pb(4) and mppb(4) to new pci_machdep.c file.
- Fix style.

Add driver for Prometheus PCI bridge.
Change approved by phx.

Add basic PCI support for amiga port.
Add missing bus_space(9) methods needed for MI PCI.
Add p5pb(4) - Phase5 PCI bridge driver (and the man page).
Add quirks table to zbus(4) - needed for p5pb.
Change approved by phx.

Fix DRACO kernel breakage introduced by my previous commit.

Add Bluetooth stack to Amiga. Tested with 3Com 3CRWB6096B on an A1200. Change approved by phx.

dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.77.2; 1.77.4;
Driver for BlizzardPPC 603e+ SCSI host adatper.
Patch submitted by Radoslaw Kujawa.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.73.2; 1.73.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Add COMPAT_50.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.69.2;
Enable fss(4) in not only GENERIC but also all !INSTALL kernels (i.e. DRACO).

Add accept filters to a proper file, as _READ_ME_FIRST_ claims.

Move "options WAPBL" so that it also gets added to INSTALL kernels.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.65.6; 1.65.10; 1.65.12; 1.65.16;
Remove systrace. Ok core@.

branches: 1.64.2; 1.64.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.62.2; 1.62.6;
wdc frontent for the buddha and catweazle Z2 hardware. From an old prototype
by me which was never committed due to lack of testers, adopted to 4.99 and
fixed by Frank Wille.

Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.60.2; 1.60.4; 1.60.8;
The option COMPAT_AOUT_M68K now requires COMPAT_40 (recent mount changes),
so make sure to define COMPAT_40 too.

Grr, do the addition of pseudo-device agr the right way

branches: 1.58.2; 1.58.8; 1.58.10; 1.58.16; 1.58.18;
Remove tmpfs's experimental status. OK'ed by core@.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

branches: 1.56.2; 1.56.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.53.2;
Add CARP to further platforms

ok christos, julian coleman and matthew green

branches: 1.52.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.51.2; 1.51.4; 1.51.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.49.2;
Add uncommented file-system UDF for generated config GENERIC files.

branches: 1.48.2; 1.48.4;
Add veriexec stuff to the common config file.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Add (commented out) file-system TMPFS in a proper file.

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.37.2;
Add PTYFS (commented out) in the correct form.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add wsmux.

branches: 1.34.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

add SMBFS/nsmb, per PR port-amiga/29066 by Florian Stoehr

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.28.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.27.2;
No more idesc please - we use the wdc driver.

Add COMPAT_BSDPTY on all the kernels that have COMPAT options.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.18.2;
Add wsfont pseudo-device.

With this the custom font loading code isn't needed and is removed.

Replace an IBM-encoded wsfont with ISO-encoded one

Add atabus

added wsmouse

add COMPAT_15/COMPAT_16

This was missing pseudo-device ksyms. Pointed out by J. Andberg.

branches: 1.12.2;
make /dev/reload optional. (It is only implemented for a.out kernels at the
moment.)

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added a commented out cgd(4).

add SYSTRACE here; pointed out by lukem

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF

branches: 1.2.2; 1.2.4;
Ensure INSTALL media has PIPE_SOCKETPAIR, MALLOC_NOINLINE and VNODE_OP_NOINLINE

branches: 1.1.2;
Use m4 instead of cpp to generate the various kernel configurations,
since cpp is the "C compiler pre-processor", and as such, isn't really
suited to parsing non-C-language files...

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

s/littel/little/ mainly in copy pasted comments.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.147.2;
Build in full debug symbols by default.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

The config files supported by this port are regened from this template.
Apply the changes which I previously made directly to the config files by
mistake.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.138.2; 1.138.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Disable svr4 and svr4_32 on sparc, sparc64 and amiga - the only places
where they were still enabled.

Remove TCP_COMPAT_42 from the config files. Pass 1.

branches: 1.132.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.129.2; 1.129.4;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.125.2;
Use COPTS="-O2 -fno-reorder-blocks" for kernels except INSTALL_CONFIGURATION.

Disable X-Surf devices for DRACO's configuration.

- ne at xsh requires ax88190 and ax88190 requires mii(4),
but all mii devices are declared only inside AMIGA_CONFIGURATION
- X-Surf also add wdc(4) but all children devices like atabus and
atapibus are declared only for AMIGA_CONFIGURATION

XXX: DRACO kernel is not built during build.sh release.

branches: 1.123.2;
Implement the probe procedure for ACA500. Now the user just needs acafh0
compiled in his kernel and it all should(tm) work.

Due to lack of obio in amiga port, the probe is called directly from mbattach().
This is going to change with the introduction of obio for all non-autoconfig
expansions.

Changes to ACA500 support:
- Add support for second (aux) CF slot.
- Rework wdc attachment to be more sane.
- Add support for clockport on ACA500.
- Fix style where appropriate.

Add preliminary support for the Individual Computers ACA500 in the form of acahf
driver. If ACA500 is equipped with supported accelerator with MMU, it allows
running NetBSD on an Amiga 500.

Since ACA is not autoconf-aware, and the probe procedure does not exist yet, the
driver is activated with the ACA500_SUPPORT kernel option. The acahf driver
is commented out in the GENERIC kernel for now (at least until it stops being
very experimental and hackish).

When it comes to ACA-specific hardware, for now the boot CF slot works. Support for everything else is incoming...

Nuke long dead NKPTADD and NKPTADDSHIFT options from config files.

Add the new xsh(4) driver to GENERIC.in template.

G/C PFIL_HOOKS from the kernel configs.

branches: 1.117.2;
remove obsolete networking options

Add slhci at zbus (Thylacine) and some USB HID devices.

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Include two MII PHY drivers, as needed by certain PCMCIA network cards.
More PHY drivers should be added when needed.

Add forgotten atabus at ata. Needed for satalink.

Add em4k(4).

Add empm(4) driver to config files.

Argh, commited wrong file. Add z3rambd.

Enable wdc at xsurf, remove WDC_NO_IDS (phx@ confirmed it's not needed).

Add (commented out for now) driver for X-Surf IDE.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.103.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

Don't enable wsmouse in a non-WSCONS kernel.

Enable empb in GENERIC, fix build, rearrange files.amiga.

Add a driver for Elbox Mediator 1200 PCI bridges. This is still a work in
progress, but now it is good enough to drive a NE2000 card. Support for
memory space accesses will be added soon(ish).

- Split X-Surf driver from if_ne_zbus, rework, add support for clockports present on X-Surf boards.
- Add gencp(4), a driver for generic clockports (it just needs a base address).

Approved by phx.

Add clockport(4) layer, which provides support for expansion bus present on
Amiga-style clockports. Also add a1k2cp(4) backend driver and the first
clockport device driver com_ss, that supports com(4) on clockport(4)
(particurarly Individual Computers SilverSurfer). Disabled by default,
since probe procedure is not written yet.

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.96.2; 1.96.6; 1.96.8;
Add voodoofb support. Allows using 3Dfx Voodoo 3 in G-REX as a console.

Don\'t forget to disable atabus* when disabling the efa driver.

User reported that efa driver attached when FastATA hardware was absent, but 4x EIDE splitter was present. Disable efa in GENERIC until problem is solved and/or better probe function is written.

Tons of enchancements to MD PCI code:
- The G-REX 4000 and G-REX 1200 are now really supported and working (still only 1st slot but the rest are a matter of time).
- Add bridge identification to p5pb, simplifies the driver and make it more user-friendly.
- Retire P5PB_GENFB and P5PB_OLD_FIRMWARE options, these are now handled automatically, depending on used hardware and firmware.
- Add PCI bus reconfiguration support to p5pb (PCI_NETBSD_CONFIGURE), allows using G-REX without boot to AmigaOS.
- Bring p5pb registers desription up to date with my knowledge.
- Add a lot of debugging code to p5pb (enabled by P5PB_DEBUG kernel option).
- Fix PCI_NETBSD_CONFIGURE in mppb (now it really works).
- Fix quirk handling in zbus.
- Update GENERIC.in and regen the kernel configs.
- Misc cleanup.

Add cv3dpb, a driver for CyberVision64/3D PCI bridge, which was split from p5pb.

Changes to Phase5 hardware support:
- Rework p5pb driver - simplify, cleanup, make more flexible.
- Add p5membar driver, which handles PCI resources autoconfigured by the firmware.
- Introduce intermediate p5bus layer, between zbus and CSPPC/BPPC on-board devices (p5pb, cbiiisc, bppcsc).
- Add experimental G-REX support to p5pb (first slot support only).
- Split CV64/3D PCI bridge support into separate cv3dpb driver (to be committed later).

Approved by phx.

Add putter device to generic kernels.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Amiga wscons/Xorg support, first phase.
Implemented wscons for CV64 and CV64/3D. Other graphics cards drivers are
prepared for it, but will not be attempted before Xorg is not running.
The wscons support is disabled by default. A GENERIC kernel should behave
like always. Use WSCONS to try out a kernel with wscons support.
Done by rkujawa@ and phx@.

branches: 1.87.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.86.2;
Enable efa in GENERIC.

Add driver for ELBOX FastATA 1200 Mk-III/Mk-IV (and the man page).

Minor changes to Amiga PCI MD code:
- Add bus enumeration and resource assignment (PCI_NETBSD_CONFIGURE) to mppb(4) - no more need to run AmigaOS to configure the bus.
- Add PCI configuration address register to p5pb(4).
- Add PCI I/O space support to p5pb(4).
- Move common code from p5pb(4) and mppb(4) to new pci_machdep.c file.
- Fix style.

Add driver for Prometheus PCI bridge.
Change approved by phx.

Add basic PCI support for amiga port.
Add missing bus_space(9) methods needed for MI PCI.
Add p5pb(4) - Phase5 PCI bridge driver (and the man page).
Add quirks table to zbus(4) - needed for p5pb.
Change approved by phx.

Fix DRACO kernel breakage introduced by my previous commit.

Add Bluetooth stack to Amiga. Tested with 3Com 3CRWB6096B on an A1200. Change approved by phx.

dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.77.2; 1.77.4;
Driver for BlizzardPPC 603e+ SCSI host adatper.
Patch submitted by Radoslaw Kujawa.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.73.2; 1.73.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Add COMPAT_50.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.69.2;
Enable fss(4) in not only GENERIC but also all !INSTALL kernels (i.e. DRACO).

Add accept filters to a proper file, as _READ_ME_FIRST_ claims.

Move "options WAPBL" so that it also gets added to INSTALL kernels.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.65.6; 1.65.10; 1.65.12; 1.65.16;
Remove systrace. Ok core@.

branches: 1.64.2; 1.64.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.62.2; 1.62.6;
wdc frontent for the buddha and catweazle Z2 hardware. From an old prototype
by me which was never committed due to lack of testers, adopted to 4.99 and
fixed by Frank Wille.

Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.60.2; 1.60.4; 1.60.8;
The option COMPAT_AOUT_M68K now requires COMPAT_40 (recent mount changes),
so make sure to define COMPAT_40 too.

Grr, do the addition of pseudo-device agr the right way

branches: 1.58.2; 1.58.8; 1.58.10; 1.58.16; 1.58.18;
Remove tmpfs's experimental status. OK'ed by core@.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

branches: 1.56.2; 1.56.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.53.2;
Add CARP to further platforms

ok christos, julian coleman and matthew green

branches: 1.52.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.51.2; 1.51.4; 1.51.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.49.2;
Add uncommented file-system UDF for generated config GENERIC files.

branches: 1.48.2; 1.48.4;
Add veriexec stuff to the common config file.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Add (commented out) file-system TMPFS in a proper file.

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.37.2;
Add PTYFS (commented out) in the correct form.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add wsmux.

branches: 1.34.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

add SMBFS/nsmb, per PR port-amiga/29066 by Florian Stoehr

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.28.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.