GENERIC.in revision 1.98
1# $NetBSD: GENERIC.in,v 1.98 2012/04/17 09:59:03 rkujawa Exp $ 2# 3## 4# GENERIC machine description file 5# 6# This machine description file is used to generate the default NetBSD 7# kernel. The generic kernel does not include all options, subsystems 8# and device drivers, but should be useful for most applications. 9# 10# The machine description file can be customised for your specific 11# machine to reduce the kernel size and improve its performance. 12# 13# For further information on compiling NetBSD kernels, see the config(8) 14# man page. 15# 16# For further information on hardware support for this architecture, see 17# the intro(4) man page. For further information about kernel options 18# for this architecture, see the options(4) man page. For an explanation 19# of each device driver in this file see the section 4 man page for the 20# device. 21 22m4_divert(-1) 23# 24# GENERIC Amiga or DraCo 25# 26# This configuration file contains all possible options 27# 28# make AMIGA extracts the AMIGA configuration file. 29# make DRACO extracts the DRACO configuration file. 30# make GENERIC extracts the GENERIC configuration file. 31# make INSTALL extracts the INSTALL configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48 49m4_divert(0)m4_dnl 50 51include "arch/amiga/conf/std.amiga" 52 53options INCLUDE_CONFIG_FILE # embed config file in kernel binary 54 55#ident "GENERIC-$Revision: 1.98 $" 56 57m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 58makeoptions COPTS="-Os" 59')m4_dnl 60 61maxusers 8 62options RTC_OFFSET=0 63 64# 65# mainboards to support (in addition to Amiga) 66# 67m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 68options DRACO 69')m4_dnl 70m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 71options BB060STUPIDROM # You need this, if you have a non-DraCo 72 # MC68060 with an OS ROM up to (at least) 73 # V40 (OS3.1) and want to boot with the 74 # bootblock. 75 # You do not need this if you have a DraCo, 76 # have no 68060 or NEVER use the bootblock 77options P5PPC68KBOARD # Phase5 PPC/68K board support 78')m4_dnl 79# 80# processors this kernel should support 81# 82options M68060 # support for 060 83options M060SP # MC68060 software support (Required for 060) 84m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 85options M68040 # support for 040 86options FPSP # MC68040 floating point support 87options M68030 # support for 030 88options M68020 # support for 020/851 89options FPU_EMULATE # FPU emulation 90')m4_dnl 91 92# 93# Networking options 94# 95options INET # IP networking support (Required) 96options INET6 # IPV6 97#options IPSEC # IP security 98#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 99#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 100#options IPSEC_DEBUG # debug for IP security 101#options GATEWAY # Packet forwarding 102#options DIRECTED_BROADCAST # Broadcast across subnets 103 104m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 105#options MROUTING # Multicast routing 106#options PIM # Protocol Independent Multicast 107#options ISO,TPIP # OSI 108#options EON # OSI tunneling over IP 109options NETATALK # AppleTalk networking protocols 110#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 111')m4_dnl 112 113options PPP_BSDCOMP # BSD-Compress compression support for PPP 114options PPP_DEFLATE # Deflate compression support for PPP 115options PPP_FILTER # Active filter support for PPP (requires bpf) 116options PFIL_HOOKS # pfil(9) packet filter hooks 117options IPFILTER_LOG # ipmon(8) log support 118options IPFILTER_LOOKUP # ippool(8) support 119options IPFILTER_COMPAT # Compat for IP-Filter 120#options IPFILTER_DEFAULT_BLOCK # block all packets by default 121 122#options ALTQ # Manipulate network interfaces' output queues 123#options ALTQ_BLUE # Stochastic Fair Blue 124#options ALTQ_CBQ # Class-Based Queueing 125#options ALTQ_CDNR # Diffserv Traffic Conditioner 126#options ALTQ_FIFOQ # First-In First-Out Queue 127#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 128#options ALTQ_HFSC # Hierarchical Fair Service Curve 129#options ALTQ_LOCALQ # Local queueing discipline 130#options ALTQ_PRIQ # Priority Queueing 131#options ALTQ_RED # Random Early Detection 132#options ALTQ_RIO # RED with IN/OUT 133#options ALTQ_WFQ # Weighted Fair Queueing 134 135# Filesystems 136file-system FFS # Berkeley fast file system 137file-system EXT2FS # second extended file system (linux) 138#file-system LFS # log-structured filesystem (experimental) 139 140m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 141file-system MFS # Memory based filesystem 142')m4_dnl 143 144file-system NFS # Network File System client side code 145file-system ADOSFS # AmigaDOS file system 146file-system CD9660 # ISO 9660 + Rock Ridge filesystem 147file-system MSDOSFS # MS-DOS filesystem 148 149file-system KERNFS # kernel data-structure filesystem 150 151m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 152file-system FDESC # user file descriptor filesystem 153file-system NULLFS # loopback filesystem 154file-system OVERLAY # overlay filesystem 155file-system PROCFS # /proc filesystem 156file-system UMAPFS # NULLFS + uid and gid remapping 157file-system UNION # union filesystem 158file-system SMBFS # experimental - CIFS; also needs nsmb (below) 159file-system PTYFS # /dev/pts/N support 160file-system TMPFS # Efficient memory file-system 161#file-system UDF # experimental - OSTA UDF CD/DVD file-system 162')m4_dnl 163 164# Filesystem options 165 166#options FFS_EI # FFS Endian Independent support 167options WAPBL # File system journaling support 168 169m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 170options QUOTA # legacy UFS quotas 171options QUOTA2 # new, in-filesystem UFS quotas 172#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 173options NFSSERVER # Network File System server side code 174#options FFS_NO_SNAPSHOT # No FFS snapshot support 175')m4_dnl 176 177#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 178 # immutable) behave as system flags. 179 180# 181# Compatibility options for various existing systems 182# 183 184m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 185#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 186options COMPAT_43 # compatibility with 4.3BSD interfaces 187options COMPAT_09 # compatibility with NetBSD 0.9 188options COMPAT_10 # compatibility with NetBSD 1.0 189options COMPAT_12 # compatibility with NetBSD 1.2 190options COMPAT_13 # compatibility with NetBSD 1.3 191options COMPAT_14 # compatibility with NetBSD 1.4 192options COMPAT_15 # compatibility with NetBSD 1.5 193options COMPAT_16 # compatibility with NetBSD 1.6 194options COMPAT_20 # compatibility with NetBSD 2.0 195options COMPAT_30 # NetBSD 3.0 compatibility. 196options COMPAT_40 # NetBSD 4.0 compatibility. 197options COMPAT_50 # NetBSD 5.0 compatibility. 198options COMPAT_SUNOS # Support to run Sun (m68k) executables 199options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 200options COMPAT_NOMID # allow nonvalid machine id executables 201#options COMPAT_LINUX # Support to run Linux/m68k executables 202')m4_dnl 203 204options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 205options COMPAT_AOUT_M68K # actually make some system calls work. 206options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 207 208m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 209# 210# Support for System V IPC facilities. 211# 212options SYSVSHM # System V-like shared memory 213options SYSVMSG # System V-like messages 214options SYSVSEM # System V-like semaphores 215')m4_dnl 216 217# 218# Support for various kernel options 219# 220 221m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 222options KTRACE # system call tracing support 223')m4_dnl 224#options INSECURE # disable kernel security levels 225options SCSIVERBOSE # human readable SCSI error messages 226options USERCONF # userconf(4) support 227m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 228options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 229options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 230', `m4_dnl 231options NTP # NTP phase/frequency locked loop 232#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 233')m4_dnl 234 235# Enable experimental buffer queue strategy for better responsiveness under 236# high disk I/O load. Use it with caution - it's not proven to be stable yet. 237#options BUFQ_READPRIO 238#options BUFQ_PRIOCSCAN 239 240# 241# Misc. debugging options 242# 243options DDB # Kernel debugger 244#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 245#options DIAGNOSTIC # Extra kernel sanity checks 246#options DEBUG # Enable misc. kernel debugging code 247#options SYSCALL_DEBUG # debug all syscalls. 248#options SCSIDEBUG # Add SCSI debugging statements 249#options PANICBUTTON # Forced crash via keypress (?) 250 251# 252# Amiga specific options 253# 254#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 255 # first bank of RAM. (default: unlimited) 256#options NKPTADD=4 # set this for 4 additional KPT pages 257#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 258 # per 16 MB (1<<24 bytes) of RAM 259 # uncomment and decrease this, or uncomment and 260 # increase NKPTADD if you get "out of PT pages" 261 # panics. 262 263# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 264# before the 10 secondinterval ends, or that KBDRESET does work at all. 265#options KBDRESET # sync on Ctrl-Amiga-Amiga 266 267# These options improve performance with the built-in serial port 268# on slower Amigas. Try the larger buffers first then lev6_defer. 269#options SERIBUF_SIZE=4096 270#options SEROBUF_SIZE=32 271#options LEV6_DEFER # defers l6 to l4 (below serial l5) 272 273m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 274#options DEVRELOAD # implement /dev/reload 275# # currently only works for a.out kernels 276')m4_dnl 277 278options RETINACONSOLE # enable code to allow retina to be console 279m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 280options ULOWELLCONSOLE # enable code to allow a2410 to be console 281options CL5426CONSOLE # Cirrus console 282options CV64CONSOLE # CyberVision console 283options TSENGCONSOLE # Tseng console 284options CV3DCONSOLE # CyberVision 64/3D console 285 286options GRF_ECS # Enhanced Chip Set 287options GRF_NTSC # NTSC 288options GRF_PAL # PAL 289options GRF_A2024 # Support for the A2024 290options GRF_AGA # AGA Chip Set 291options GRF_AGA_VGA # AGA VGAONLY timing 292options GRF_SUPER72 # AGA Super-72 293')m4_dnl 294#options KFONT_8X11 # 8x11 font 295 296# select a font for the console according to the character set and keymap 297# you want to use 298options KFONT_CONS_ISO8859_1 299#options KFONT_CONS_ISO8859_2 300 301# This is how you would tell the kernel the A2410 oscillator frequencies: 302# The used frequencies are the defaults, and do not need option setting 303#options ULOWELL_OSC1=36000000 304#options ULOWELL_OSC2=66667000 305 306# This is how you specify the blitting speed, higher values may speed up blits 307# a littel bit. If you raise this value too much some trash may appear. 308# the commented version is the default. 309#options RH_MEMCLK=61000000 310# this option enables the 64 bit sprite which does not work 311# for quite a few people. E.g. The cursor sprite will turn to a block 312# when moved to the top of the screen in X. 313#options RH_64BIT_SPRITE 314# enables fast scroll code appears to now work on 040 systems. 315#options RETINA_SPEED_HACK 316# enables the Hardwarecursor which does not work on some systems. 317#options RH_HARDWARECURSOR 318 319m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 320# wscons aware interface to amiga custom chips. 321# If you enable it enable also wskbd. 322# 323#amidisplaycc0 at mainbus0 # wscons interface to custom chips 324#wsdisplay0 at amidisplaycc0 console ? 325#options WSEMUL_VT100 326#options FONT_VT220L8x10 327#options FONT_VT220ISO8x16 328')m4_dnl 329 330m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 331p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus 332 333grfcc0 at mainbus0 # custom chips 334grfrt0 at zbus0 # retina II 335')m4_dnl 336grfrh0 at zbus0 # retina III 337m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 338grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 339grful0 at zbus0 # A2410 340grfcv0 at zbus0 # CyberVision 64 341grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 342grfcv3d0 at zbus0 # CyberVision 64/3D 343')m4_dnl 344 345m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 346grf0 at grfcc0 347grf1 at grfrt0 348')m4_dnl 349grf2 at grfrh0 350m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 351grf3 at grfcl? 352grf4 at grful0 353grf5 at grfcv0 354grf6 at grfet? 355grf7 at grfcv3d0 356ite0 at grf0 # terminal emulators for grfs 357ite1 at grf1 # terminal emulators for grfs 358')m4_dnl 359ite2 at grf2 # terminal emulators for grfs 360m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 361ite3 at grf3 # terminal emulators for grfs 362ite4 at grf4 # terminal emulators for grfs 363ite5 at grf5 # terminal emulators for grfs 364ite6 at grf6 # terminal emulators for grfs 365ite7 at grf7 # terminal emulators for grfs 366 367#wsdisplay* at grf5 console ? # wsdisplay on top of grf (CV64) 368#wsdisplay* at grf7 console ? # wsdisplay on top of grf (CV64/3D) 369')m4_dnl 370 371msc0 at zbus0 # A2232 MSC multiport serial. 372mfc0 at zbus0 # MultiFaceCard I/O board 373mfcs0 at mfc0 unit 0 # MFC serial 374mfcs1 at mfc0 unit 1 # MFC serial 375#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 376#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 377#mfcs2 at mfc1 unit 0 378#mfcs3 at mfc1 unit 1 379#mfcp1 at mfc1 unit 0 380 381hyper* at zbus? # zbus HyperCom3/3+/4/4+ 382#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 383com* at hyper? port ? # Hypercom3/4 serial ports 384lpt* at hyper? port ? # Hypercom3+/4+ parallel port 385 386#options IOBZCLOCK=22118400 # default, uncomment the next line 387#options IOBZCLOCK=24000000 # if needed. 388 389iobl* at zbus? # zbus IOBlix 390com* at iobl? port ? # IOBlix serial ports 391lpt* at iobl? port ? # IOBlix parallel ports 392 393 394# 395# Keyboard device. Optionally can attach a wskbd. 396# wskbd works together with a wsdisplay so enable them both if you will. 397# Don't enable wskbd if you use ite. 398# 399# XXX in std.amiga: kbd0 at mainbus0 400#wskbd0 at kbd0 console ? 401 402 403m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 404# 405# Amiga Mainboard devices (sans graphics and keyboard) 406# 407 408ser0 at mainbus0 # Amiga onboard serial 409par0 at mainbus0 # Amiga onboard parallel 410ms* at mainbus0 # Amiga mice 411fdc0 at mainbus0 # Amiga FDC 412fd* at fdc0 unit ? # floppy disks on the later 413a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 414a2kbbc0 at mainbus0 # A2000 battery backed clock 415m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 416aucc* at mainbus0 # Amiga CC audio 417audio* at aucc? 418 419#a1k2cp0 at mainbus0 # A1200 on-board clockport 420#clockport* at a1k2cp0 421 422#com* at clockport? # Individual Computers SilverSurfer 423')m4_dnl 424')m4_dnl 425 426#wsmouse* at ms? 427 428m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 429# 430# DraCo Mainboard devices (sans keyboard) 431# 432 433drbbc0 at mainbus0 # DraCo battery backed clock 434drsupio0 at mainbus0 # DraCo superio chip 435com* at drsupio? port ? # DraCo serial 436lpt0 at drsupio? port ? # DraCo parallel 437')m4_dnl 438 439# 440# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 441# 442 443m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 444m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 445# Alas, Melody-Z2 dont configure in the DraCo bus. 446melody* at zbus0 # Melody MPEG audio decoder 447audio* at melody? 448')m4_dnl 449 450repulse* at zbus0 # ALiENDESiGN Repulse 451audio* at repulse? 452 453toccata* at zbus0 # MacroSystem GmbH Toccata 454audio* at toccata? 455')m4_dnl 456 457# Ethernet cards: 458le* at zbus0 # A2065, Ameristar, Ariadne 459ne* at zbus0 # AriadneII, X-surf 460ed* at zbus0 # Hydra, ASDG LanRover 461es* at zbus0 # CEI A4066 EthernetPLUS 462qn* at zbus0 # Quicknet 463 464# Arcnet 465bah* at zbus0 # C=/Ameristar A2060 / 560 466 467m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 468# Greater Valley Product Bus 469gvpbus* at zbus0 470 471# scsi stuff, all possible 472gtsc0 at gvpbus? # GVP series II scsi 473scsibus* at gtsc0 474ahsc0 at mainbus0 # A3000 scsi 475scsibus* at ahsc0 476atzsc0 at zbus0 # A2091 scsi 477scsibus* at atzsc0 478wstsc0 at zbus0 # Wordsync II scsi 479scsibus* at wstsc0 480ivsc0 at zbus0 # IVS scsi 481scsibus* at ivsc0 482mlhsc0 at zbus0 # Hacker scsi 483scsibus* at mlhsc0 484otgsc0 at zbus0 # 12 gauge scsi 485scsibus* at otgsc0 486zssc0 at zbus0 # Zeus scsi 487scsibus* at zssc0 488mgnsc0 at zbus0 # Magnum scsi 489scsibus* at mgnsc0 490wesc0 at zbus0 # Warp Engine scsi 491scsibus* at wesc0 492bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi 493scsibus* at bppcsc0 494afsc0 at zbus0 # A4091 scsi 495scsibus* at afsc0 496aftsc0 at mainbus0 # A4000T scsi 497scsibus* at aftsc0 498flsc0 at zbus0 # FastlaneZ3 scsi 499scsibus* at flsc0 500bzsc0 at zbus0 # Blizzard 1230 I,II scsi 501scsibus* at bzsc0 502bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 503scsibus* at bzivsc0 504bztzsc0 at zbus0 # Blizzard 2060 scsi 505scsibus* at bztzsc0 506cbsc0 at zbus0 # CyberSCSI I 507scsibus* at cbsc0 508cbiisc0 at zbus0 # CyberSCSI II 509scsibus* at cbiisc0 510cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 511scsibus* at cbiiisc0 512empsc0 at zbus0 # Emplant scsi 513scsibus* at empsc0 514 515wdc0 at mainbus0 # A4000 & A1200 IDE bus 516wdc* at zbus0 # Buddha / Catweasel 517#efa0 at mainbus0 # ELBOX FastATA 1200 Mk-III/Mk-IV 518 519atabus* at wdc? channel ? # ATA bus 520#atabus* at efa? channel ? # ATA bus 521wd* at atabus? drive ? # + drives 522atapibus* at atabus? # ATAPI bus 523cd* at atapibus? drive ? # ATAPI CD-ROM drives 524sd* at atapibus? drive ? # ATAPI disk drives 525 526pccard0 at mainbus0 527pcmcia* at pccard0 528com* at pcmcia? function ? # Modems and serial cards 529pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 530aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 531wdc* at pcmcia? function ? 532awi* at pcmcia? function ? # BayStack 650 (802.11FH) 533ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 534mbe* at pcmcia? function ? # MB8696x based Ethernet 535ne* at pcmcia? function ? # NE2000-compatible Ethernet 536sm* at pcmcia? function ? # Megahertz Ethernet 537mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 538com* at mhzc? 539sm* at mhzc? 540 541')m4_dnl 542 543m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 544drsc0 at mainbus0 # DraCo scsi 545scsibus* at drsc0 546')m4_dnl 547 548 549# each hard drive from low target to high 550# will configure to the next available sd unit number 551sd* at scsibus? target ? lun ? # scsi disks 552st* at scsibus? target ? lun ? # scsi tapes 553cd* at scsibus? target ? lun ? # scsi cds 554ch* at scsibus? target ? lun ? # scsi autochangers 555m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 556ss* at scsibus? target ? lun ? # scsi scanner 557uk* at scsibus? target ? lun ? # scsi unknown 558')m4_dnl 559m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 560 561# PCI bus support 562options PCIVERBOSE # verbose PCI device autoconfig messages 563#options PCI_CONFIG_DUMP 564options PCI_NETBSD_CONFIGURE # supported by mppb(4) and p5pb(4) 565 566p5pb0 at p5bus0 # Phase5 PCI bridge (CVPPC/BVPPC/G-REX) 567p5membar* at zbus0 # Phase5 PCI bridge autoconfiguring BARs 568#options P5PB_DEBUG # enable excessive debug for p5pb 569#options P5PB_CONSOLE # console on CVPPC/BVPPC/Voodoo3 570pci* at p5pb0 571 572mppb* at zbus0 # Matay Prometheus Zorro-PCI bridge 573pci* at mppb? 574 575#cv3dpb* at zbus0 # CyberVision 64/3D PCI bridge 576 577#genfb* at pci? # generic fb, CVPPC/BVPPC only 578#voodoofb* at pci? # 3Dfx Voodoo 3 in G-REX 579#radeonfb* at pci? # untested 580 581ne* at pci? # NE2000 Ethernet 582 583# Bluetooth Controller and Device support 584# tested only with btuart on an A1200 585 586# Bluetooth PCMCIA Controllers 587bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A 588btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139 589 590# Bluetooth Device Hub 591bthub* at bcsp? 592bthub* at bt3c? 593bthub* at btbc? 594bthub* at btuart? 595 596# Bluetooth HID support 597bthidev* at bthub? 598 599# Bluetooth Mouse 600btms* at bthidev? reportid ? 601wsmouse* at btms? mux 0 602 603# Bluetooth Keyboard 604#btkbd* at bthidev? reportid ? 605#wskbd* at btkbd? console ? mux 1 606 607# Bluetooth Apple Magic Mouse 608btmagic* at bthub? 609wsmouse* at btmagic? mux 0 610 611# Bluetooth Audio support 612#btsco* at bthub? 613 614')m4_dnl 615m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 616# 617# accept filters 618pseudo-device accf_data # "dataready" accept filter 619pseudo-device accf_http # "httpready" accept filter 620')m4_dnl 621 622pseudo-device loop # loopback network interface 623pseudo-device sl # SLIP network interfaces 624pseudo-device ppp # PPP network interfaces 625pseudo-device pppoe # PPP over Ethernet (RFC 2516) 626pseudo-device tun # network tunnel line discipline 627pseudo-device tap # virtual Ethernet 628#pseudo-device gre # generic L3 over IP tunnel 629pseudo-device bpfilter # Berkeley packet filter 630#pseudo-device carp # Common Address Redundancy Protocol 631pseudo-device ipfilter # IP Filter package 632pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 633#pseudo-device faith # IPv[46] tcp relay translation i/f 634pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 635pseudo-device vlan # IEEE 802.1q encapsulation 636pseudo-device bridge # simple inter-network bridging 637#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 638pseudo-device agr # IEEE 802.3ad link aggregation 639#pseudo-device pf # PF packet filter 640#pseudo-device pflog # PF log if 641m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 642#pseudo-device fss # file system snapshot device 643', `m4_dnl 644pseudo-device fss # file system snapshot device 645')m4_dnl 646m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 647#pseudo-device putter # for puffs and pud 648', `m4_dnl 649pseudo-device putter # for puffs and pud 650')m4_dnl 651 652pseudo-device view 4 # views (needed for grfcc) 653m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 654pseudo-device pty 2 # pseudo-terminals 655', `m4_dnl 656pseudo-device pty # pseudo-terminals 657')m4_dnl 658pseudo-device clockctl # user control of clock subsystem 659 660#pseudo-device wsfont # wsfont(4) dynamic font loading support 661#pseudo-device wsmux # mouse & keyboard multiplexor 662 663pseudo-device vnd # vnode pseudo-disks 664#options VND_COMPRESSION # compressed vnd(4) 665pseudo-device ccd 4 # concatenated disk devices 666#pseudo-device cgd 4 # cryptographic disk devices 667pseudo-device raid 8 # RAIDframe disk driver 668options RAID_AUTOCONFIG # auto-configuration of RAID components 669# Options to enable various other RAIDframe RAID types. 670# options RF_INCLUDE_EVENODD=1 671# options RF_INCLUDE_RAID5_RS=1 672# options RF_INCLUDE_PARITYLOGGING=1 673# options RF_INCLUDE_CHAINDECLUSTER=1 674# options RF_INCLUDE_INTERDECLUSTER=1 675# options RF_INCLUDE_PARITY_DECLUSTERING=1 676# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 677 678#options RND_COM # use "com" randomness as well (BROKEN) 679 680m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 681pseudo-device ksyms # /dev/ksyms (kernel symbols) 682pseudo-device nsmb # experimental - SMB requester 683')m4_dnl 684m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 685pseudo-device bcsp # BlueCore Serial Protocol 686pseudo-device btuart # Bluetooth HCI UART (H4) 687')m4_dnl 688 689# Veriexec 690# 691# a pseudo device needed for veriexec 692#pseudo-device veriexec 1 693# 694# Uncomment the fingerprint methods below that are desired. Note that 695# removing fingerprint methods will have almost no impact on the kernel 696# code size. 697# 698#options VERIFIED_EXEC_FP_RMD160 699#options VERIFIED_EXEC_FP_SHA256 700#options VERIFIED_EXEC_FP_SHA384 701#options VERIFIED_EXEC_FP_SHA512 702#options VERIFIED_EXEC_FP_SHA1 703#options VERIFIED_EXEC_FP_MD5 704 705config netbsd root on ? type ? 706