GENERIC.in revision 1.44
1# $NetBSD: GENERIC.in,v 1.44 2005/10/07 17:46:33 tsutsui Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21m4_divert(-1) 22# 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make GENERIC extracts the GENERIC configuration file. 30# make INSTALL extracts the INSTALL configuration file. 31# make WSCONS extracts the WSCONS configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48# If building WSCONS, uncomment various options 49# 50m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') 51 52 53m4_divert(0)m4_dnl 54 55include "arch/amiga/conf/std.amiga" 56 57options INCLUDE_CONFIG_FILE # embed config file in kernel binary 58 59#ident "GENERIC-$Revision: 1.44 $" 60 61m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 62makeoptions COPTS="-Os" 63')m4_dnl 64 65maxusers 8 66options RTC_OFFSET=0 67 68# 69# mainboards to support (in addition to Amiga) 70# 71m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 72options DRACO 73')m4_dnl 74m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 75options BB060STUPIDROM # You need this, if you have a non-DraCo 76 # MC68060 with an OS ROM up to (at least) 77 # V40 (OS3.1) and want to boot with the 78 # bootblock. 79 # You do not need this if you have a DraCo, 80 # have no 68060 or NEVER use the bootblock 81options P5PPC68KBOARD # Phase5 PPC/68K board support 82')m4_dnl 83# 84# processors this kernel should support 85# 86options M68060 # support for 060 87options M060SP # MC68060 software support (Required for 060) 88m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 89options M68040 # support for 040 90options FPSP # MC68040 floating point support 91options M68030 # support for 030 92options M68020 # support for 020/851 93options FPU_EMULATE # FPU emulation 94')m4_dnl 95 96# 97# Networking options 98# 99options INET # IP networking support (Required) 100options INET6 # IPV6 101#options IPSEC # IP security 102#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 103#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 104#options IPSEC_DEBUG # debug for IP security 105#options GATEWAY # Packet forwarding 106#options DIRECTED_BROADCAST # Broadcast across subnets 107 108m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 109#options MROUTING # Multicast routing 110#options PIM # Protocol Independent Multicast 111options NS # XNS 112#options NSIP # XNS tunneling over IP 113options ISO,TPIP # OSI 114#options EON # OSI tunneling over IP 115options CCITT,LLC,HDLC # X.25 116options NETATALK # AppleTalk networking protocols 117#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 118')m4_dnl 119 120options PPP_BSDCOMP # BSD-Compress compression support for PPP 121options PPP_DEFLATE # Deflate compression support for PPP 122options PPP_FILTER # Active filter support for PPP (requires bpf) 123options PFIL_HOOKS # pfil(9) packet filter hooks 124options IPFILTER_LOG # ipmon(8) log support 125#options IPFILTER_DEFAULT_BLOCK # block all packets by default 126 127#options ALTQ # Manipulate network interfaces' output queues 128#options ALTQ_BLUE # Stochastic Fair Blue 129#options ALTQ_CBQ # Class-Based Queueing 130#options ALTQ_CDNR # Diffserv Traffic Conditioner 131#options ALTQ_FIFOQ # First-In First-Out Queue 132#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 133#options ALTQ_HFSC # Hierarchical Fair Service Curve 134#options ALTQ_LOCALQ # Local queueing discipline 135#options ALTQ_PRIQ # Priority Queueing 136#options ALTQ_RED # Random Early Detection 137#options ALTQ_RIO # RED with IN/OUT 138#options ALTQ_WFQ # Weighted Fair Queueing 139 140# Filesystems 141file-system FFS # Berkeley fast file system 142file-system EXT2FS # second extended file system (linux) 143#file-system LFS # log-structured filesystem (experimental) 144 145m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 146file-system MFS # Memory based filesystem 147')m4_dnl 148 149file-system NFS # Network File System client side code 150file-system ADOSFS # AmigaDOS file system 151file-system CD9660 # ISO 9660 + Rock Ridge filesystem 152file-system MSDOSFS # MS-DOS filesystem 153 154file-system KERNFS # kernel data-structure filesystem 155 156m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 157file-system FDESC # user file descriptor filesystem 158file-system NULLFS # loopback filesystem 159file-system OVERLAY # overlay filesystem 160#file-system PORTAL # Portal filesystem 161file-system PROCFS # /proc filesystem 162file-system UMAPFS # NULLFS + uid and gid remapping 163file-system UNION # union filesystem 164file-system SMBFS # experimental - CIFS; also needs nsmb (below) 165file-system PTYFS # /dev/pts/N support 166#file-system TMPFS # experimental - Efficient memory file-system 167')m4_dnl 168 169# Filesystem options 170 171#options FFS_EI # FFS Endian Independant support 172 173m4_ifdef(`INSTALL_CONFIGURATION', ` 174options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 175', `m4_dnl 176options QUOTA # User and group quotas in FFS 177options SOFTDEP # FFS soft updates support. 178#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 179options NFSSERVER # Network File System server side code 180#options FFS_NO_SNAPSHOT # ffs snapshots 181')m4_dnl 182 183#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 184 # immutable) behave as system flags. 185 186# 187# Compatibility options for various existing systems 188# 189 190m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 191#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 192options COMPAT_43 # compatibility with 4.3BSD interfaces 193options COMPAT_09 # compatibility with NetBSD 0.9 194options COMPAT_10 # compatibility with NetBSD 1.0 195options COMPAT_12 # compatibility with NetBSD 1.2 196options COMPAT_13 # compatibility with NetBSD 1.3 197options COMPAT_14 # compatibility with NetBSD 1.4 198options COMPAT_15 # compatibility with NetBSD 1.5 199options COMPAT_16 # compatibility with NetBSD 1.6 200options COMPAT_20 # compatibility with NetBSD 2.0 201options COMPAT_30 # NetBSD 3.0 compatibility. 202options COMPAT_SUNOS # Support to run Sun (m68k) executables 203options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 204options COMPAT_NOMID # allow nonvalid machine id executables 205#options COMPAT_LINUX # Support to run Linux/m68k executables 206')m4_dnl 207 208options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 209options COMPAT_AOUT_M68K # actually make some system calls work. 210options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 211 212m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 213# 214# Support for System V IPC facilities. 215# 216options SYSVSHM # System V-like shared memory 217options SYSVMSG # System V-like messages 218options SYSVSEM # System V-like semaphores 219#options SEMMNI=10 # number of semaphore identifiers 220#options SEMMNS=60 # number of semaphores in system 221#options SEMUME=10 # max number of undo entries per process 222#options SEMMNU=30 # number of undo structures in system 223options P1003_1B_SEMAPHORE # p1003.1b semaphore support 224')m4_dnl 225 226# 227# Support for various kernel options 228# 229 230m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 231options KTRACE # system call tracing support 232options SYSTRACE # system call vetting via systrace(1) 233options LKM # Loadable kernel modules 234')m4_dnl 235#options INSECURE # disable kernel security levels 236options SCSIVERBOSE # human readable SCSI error messages 237options USERCONF # userconf(4) support 238m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 239options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 240options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 241options MALLOC_NOINLINE # Not inlining MALLOC saves memory 242', `m4_dnl 243options NTP # NTP phase/frequency locked loop 244#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 245')m4_dnl 246 247# Enable experimental buffer queue strategy for better responsiveness under 248# high disk I/O load. Use it with caution - it's not proven to be stable yet. 249#options BUFQ_READPRIO 250#options BUFQ_PRIOCSCAN 251 252# 253# Misc. debugging options 254# 255options DDB # Kernel debugger 256#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 257options DIAGNOSTIC # Extra kernel sanity checks 258#options DEBUG # Enable misc. kernel debugging code 259#options SYSCALL_DEBUG # debug all syscalls. 260#options SCSIDEBUG # Add SCSI debugging statements 261#options PANICBUTTON # Forced crash via keypress (?) 262 263# 264# Amiga specific options 265# 266#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 267 # first bank of RAM. (default: unlimited) 268#options NKPTADD=4 # set this for 4 additional KPT pages 269#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 270 # per 16 MB (1<<24 bytes) of RAM 271 # uncomment and decrease this, or uncomment and 272 # increase NKPTADD if you get "out of PT pages" 273 # panics. 274 275# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 276# before the 10 secondinterval ends, or that KBDRESET does work at all. 277#options KBDRESET # sync on Ctrl-Amiga-Amiga 278 279# These options improve performance with the built-in serial port 280# on slower Amigas. Try the larger buffers first then lev6_defer. 281#options SERIBUF_SIZE=4096 282#options SEROBUF_SIZE=32 283#options LEV6_DEFER # defers l6 to l4 (below serial l5) 284 285m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 286#options DEVRELOAD # implement /dev/reload 287# # currently only works for a.out kernels 288')m4_dnl 289 290options RETINACONSOLE # enable code to allow retina to be console 291m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 292options ULOWELLCONSOLE # enable code to allow a2410 to be console 293options CL5426CONSOLE # Cirrus console 294options CV64CONSOLE # CyberVision console 295options TSENGCONSOLE # Tseng console 296options CV3DCONSOLE # CyberVision 64/3D console 297 298options GRF_ECS # Enhanced Chip Set 299options GRF_NTSC # NTSC 300options GRF_PAL # PAL 301options GRF_A2024 # Support for the A2024 302options GRF_AGA # AGA Chip Set 303options GRF_AGA_VGA # AGA VGAONLY timing 304options GRF_SUPER72 # AGA Super-72 305')m4_dnl 306#options KFONT_8X11 # 8x11 font 307 308# select a font for the console according to the character set and keymap 309# you want to use 310options KFONT_CONS_ISO8859_1 311#options KFONT_CONS_ISO8859_2 312 313# This is how you would tell the kernel the A2410 oscillator frequencies: 314# The used frequencies are the defaults, and do not need option setting 315#options ULOWELL_OSC1=36000000 316#options ULOWELL_OSC2=66667000 317 318# This is how you specify the blitting speed, higher values may speed up blits 319# a littel bit. If you raise this value too much some trash may appear. 320# the commented version is the default. 321#options RH_MEMCLK=61000000 322# this option enables the 64 bit sprite which does not work 323# for quite a few people. E.g. The cursor sprite will turn to a block 324# when moved to the top of the screen in X. 325#options RH_64BIT_SPRITE 326# enables fast scroll code appears to now work on 040 systems. 327#options RETINA_SPEED_HACK 328# enables the Hardwarecursor which does not work on some systems. 329#options RH_HARDWARECURSOR 330 331m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 332# wscons aware interface to amiga custom chips. 333# If you enable it enable also wskbd. 334# 335m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 336amidisplaycc0 at mainbus0 # wscons interface to custom chips 337wsdisplay0 at amidisplaycc0 console ? 338options WSEMUL_VT100 339options FONT_VT220L8x10 340options FONT_VT220ISO8x16 341', ` 342#amidisplaycc0 at mainbus0 # wscons interface to custom chips 343#wsdisplay0 at amidisplaycc0 console ? 344#options WSEMUL_VT100 345#options FONT_VT220L8x10 346#options FONT_VT220ISO8x16 347')m4_dnl 348')m4_dnl 349 350m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl 351m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 352grfcc0 at mainbus0 # custom chips 353grfrt0 at zbus0 # retina II 354')m4_dnl 355grfrh0 at zbus0 # retina III 356m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 357grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 358grful0 at zbus0 # A2410 359grfcv0 at zbus0 # CyberVision 64 360grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 361grfcv3d0 at zbus0 # CyberVision 64/3D 362')m4_dnl 363 364m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 365grf0 at grfcc0 366grf1 at grfrt0 367')m4_dnl 368grf2 at grfrh0 369m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 370grf3 at grfcl? 371grf4 at grful0 372grf5 at grfcv0 373grf6 at grfet? 374grf7 at grfcv3d0 375ite0 at grf0 # terminal emulators for grfs 376ite1 at grf1 # terminal emulators for grfs 377')m4_dnl 378ite2 at grf2 # terminal emulators for grfs 379m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 380ite3 at grf3 # terminal emulators for grfs 381ite4 at grf4 # terminal emulators for grfs 382ite5 at grf5 # terminal emulators for grfs 383ite6 at grf6 # terminal emulators for grfs 384ite7 at grf7 # terminal emulators for grfs 385')m4_dnl 386')m4_dnl 387 388msc0 at zbus0 # A2232 MSC multiport serial. 389mfc0 at zbus0 # MultiFaceCard I/O board 390mfcs0 at mfc0 unit 0 # MFC serial 391mfcs1 at mfc0 unit 1 # MFC serial 392#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 393#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 394#mfcs2 at mfc1 unit 0 395#mfcs3 at mfc1 unit 1 396#mfcp1 at mfc1 unit 0 397 398hyper* at zbus? # zbus HyperCom3/3+/4/4+ 399#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 400com* at hyper? port ? # Hypercom3/4 serial ports 401lpt* at hyper? port ? # Hypercom3+/4+ parallel port 402 403#options IOBZCLOCK=22118400 # default, uncomment the next line 404#options IOBZCLOCK=24000000 # if needed. 405 406iobl* at zbus? # zbus IOBlix 407com* at iobl? port ? # IOBlix serial ports 408lpt* at iobl? port ? # IOBlix parallel ports 409 410 411# 412# Keyboard device. Optionally can attach a wskbd. 413# wskbd works together with a wsdisplay so enable them both if you will. 414# Don't enable wskbd if you use ite. 415# 416# XXX in std.amiga: kbd0 at mainbus0 417m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 418wskbd0 at kbd0 console ? 419', ` 420#wskbd0 at kbd0 console ? 421')m4_dnl 422 423 424m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 425# 426# Amiga Mainboard devices (sans graphics and keyboard) 427# 428 429ser0 at mainbus0 # Amiga onboard serial 430par0 at mainbus0 # Amiga onboard parallel 431ms* at mainbus0 # Amiga mice 432fdc0 at mainbus0 # Amiga FDC 433fd* at fdc0 unit ? # floppy disks on the later 434a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 435a2kbbc0 at mainbus0 # A2000 battery backed clock 436m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 437aucc* at mainbus0 # Amiga CC audio 438audio* at aucc? 439')m4_dnl 440')m4_dnl 441 442m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 443wsmouse* at ms? 444', ` 445#wsmouse* at ms? 446')m4_dnl 447 448m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 449# 450# DraCo Mainboard devices (sans keyboard) 451# 452 453drbbc0 at mainbus0 # DraCo battery backed clock 454drsupio0 at mainbus0 # DraCo superio chip 455com* at drsupio? port ? # DraCo serial 456lpt0 at drsupio? port ? # DraCo parallel 457')m4_dnl 458 459# 460# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 461# 462 463m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 464m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 465# Alas, Melody-Z2 dont configure in the DraCo bus. 466melody* at zbus0 # Melody MPEG audio decoder 467audio* at melody? 468')m4_dnl 469 470repulse* at zbus0 # ALiENDESiGN Repulse 471audio* at repulse? 472 473toccata* at zbus0 # MacroSystem GmbH Toccata 474audio* at toccata? 475')m4_dnl 476 477# Ethernet cards: 478le* at zbus0 # A2065, Ameristar, Ariadne 479ne* at zbus0 # AriadneII, X-surf 480ed* at zbus0 # Hydra, ASDG LanRover 481es* at zbus0 # CEI A4066 EthernetPLUS 482qn* at zbus0 # Quicknet 483 484# Arcnet 485bah* at zbus0 # C=/Ameristar A2060 / 560 486 487m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 488# Greater Valley Product Bus 489gvpbus* at zbus0 490 491# scsi stuff, all possible 492gtsc0 at gvpbus? # GVP series II scsi 493scsibus* at gtsc0 494ahsc0 at mainbus0 # A3000 scsi 495scsibus* at ahsc0 496atzsc0 at zbus0 # A2091 scsi 497scsibus* at atzsc0 498wstsc0 at zbus0 # Wordsync II scsi 499scsibus* at wstsc0 500ivsc0 at zbus0 # IVS scsi 501scsibus* at ivsc0 502mlhsc0 at zbus0 # Hacker scsi 503scsibus* at mlhsc0 504otgsc0 at zbus0 # 12 gauge scsi 505scsibus* at otgsc0 506zssc0 at zbus0 # Zeus scsi 507scsibus* at zssc0 508mgnsc0 at zbus0 # Magnum scsi 509scsibus* at mgnsc0 510wesc0 at zbus0 # Warp Engine scsi 511scsibus* at wesc0 512afsc0 at zbus0 # A4091 scsi 513scsibus* at afsc0 514aftsc0 at mainbus0 # A4000T scsi 515scsibus* at aftsc0 516flsc0 at zbus0 # FastlaneZ3 scsi 517scsibus* at flsc0 518bzsc0 at zbus0 # Blizzard 1230 I,II scsi 519scsibus* at bzsc0 520bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 521scsibus* at bzivsc0 522bztzsc0 at zbus0 # Blizzard 2060 scsi 523scsibus* at bztzsc0 524cbsc0 at zbus0 # CyberSCSI I 525scsibus* at cbsc0 526cbiisc0 at zbus0 # CyberSCSI II 527scsibus* at cbiisc0 528cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 529scsibus* at cbiiisc0 530empsc0 at zbus0 # Emplant scsi 531scsibus* at empsc0 532 533wdc0 at mainbus0 # A4000 & A1200 IDE bus 534atabus* at wdc? channel ? # ATA bus 535wd* at atabus? drive ? # + drives 536atapibus* at atabus? # ATAPI bus 537cd* at atapibus? drive ? # ATAPI CD-ROM drives 538sd* at atapibus? drive ? # ATAPI disk drives 539 540pccard0 at mainbus0 541pcmcia* at pccard0 542com* at pcmcia? function ? # Modems and serial cards 543pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 544aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 545wdc* at pcmcia? function ? 546awi* at pcmcia? function ? # BayStack 650 (802.11FH) 547ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 548mbe* at pcmcia? function ? # MB8696x based Ethernet 549ne* at pcmcia? function ? # NE2000-compatible Ethernet 550sm* at pcmcia? function ? # Megahertz Ethernet 551mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 552com* at mhzc? 553sm* at mhzc? 554 555')m4_dnl 556 557m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 558drsc0 at mainbus0 # DraCo scsi 559scsibus* at drsc0 560')m4_dnl 561 562 563# each hard drive from low target to high 564# will configure to the next available sd unit number 565sd* at scsibus? target ? lun ? # scsi disks 566st* at scsibus? target ? lun ? # scsi tapes 567cd* at scsibus? target ? lun ? # scsi cds 568ch* at scsibus? target ? lun ? # scsi autochangers 569m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 570ss* at scsibus? target ? lun ? # scsi scanner 571uk* at scsibus? target ? lun ? # scsi unknown 572')m4_dnl 573 574pseudo-device loop # loopback network interface 575pseudo-device sl 1 # SLIP network interfaces 576pseudo-device ppp 1 # PPP network interfaces 577pseudo-device pppoe # PPP over Ethernet (RFC 2516) 578pseudo-device tun 1 # network tunnel line discipline 579pseudo-device tap # virtual Ethernet 580#pseudo-device gre 2 # generic L3 over IP tunnel 581pseudo-device bpfilter 16 # Berkeley packet filter 582pseudo-device ipfilter # IP Filter package 583pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 584#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 585#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 586pseudo-device vlan # IEEE 802.1q encapsulation 587pseudo-device bridge # simple inter-network bridging 588#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 589#pseudo-device pf # PF packet filter 590#pseudo-device pflog # PF log if 591m4_ifdef(`GENERIC_CONFIGURATION', `m4_dnl 592pseudo-device fss 4 # file system snapshot device 593', `m4_dnl 594#pseudo-device fss 4 # file system snapshot device 595')m4_dnl 596 597pseudo-device view 4 # views (needed for grfcc) 598m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 599pseudo-device pty 2 # pseudo-terminals 600', `m4_dnl 601pseudo-device pty # pseudo-terminals 602')m4_dnl 603pseudo-device clockctl # user control of clock subsystem 604 605m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 606pseudo-device wsfont # wsfont(4) dynamic font loading support 607pseudo-device wsmux # mouse & keyboard multiplexor 608', `m4_dnl 609#pseudo-device wsfont # wsfont(4) dynamic font loading support 610#pseudo-device wsmux # mouse & keyboard multiplexor 611')m4_dnl 612 613pseudo-device vnd 4 # vnode pseudo-disks 614#options VND_COMPRESSION # compressed vnd(4) 615pseudo-device ccd 4 # concatenated disk devices 616#pseudo-device cgd 4 # cryptographic disk devices 617pseudo-device raid 8 # RAIDframe disk driver 618options RAID_AUTOCONFIG # auto-configuration of RAID components 619# Options to enable various other RAIDframe RAID types. 620# options RF_INCLUDE_EVENODD=1 621# options RF_INCLUDE_RAID5_RS=1 622# options RF_INCLUDE_PARITYLOGGING=1 623# options RF_INCLUDE_CHAINDECLUSTER=1 624# options RF_INCLUDE_INTERDECLUSTER=1 625# options RF_INCLUDE_PARITY_DECLUSTERING=1 626# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 627 628pseudo-device rnd # /dev/random and in-kernel generator 629#options RND_COM # use "com" randomness as well (BROKEN) 630 631m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 632pseudo-device ksyms # /dev/ksyms (kernel symbols) 633pseudo-device nsmb # experimental - SMB requester 634')m4_dnl 635 636config netbsd root on ? type ? 637