GENERIC.in revision 1.60
1# $NetBSD: GENERIC.in,v 1.60 2007/07/16 06:23:28 he Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21m4_divert(-1) 22# 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make GENERIC extracts the GENERIC configuration file. 30# make INSTALL extracts the INSTALL configuration file. 31# make WSCONS extracts the WSCONS configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48# If building WSCONS, uncomment various options 49# 50m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') 51 52 53m4_divert(0)m4_dnl 54 55include "arch/amiga/conf/std.amiga" 56 57options INCLUDE_CONFIG_FILE # embed config file in kernel binary 58 59#ident "GENERIC-$Revision: 1.60 $" 60 61m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 62makeoptions COPTS="-Os" 63')m4_dnl 64 65maxusers 8 66options RTC_OFFSET=0 67 68# 69# mainboards to support (in addition to Amiga) 70# 71m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 72options DRACO 73')m4_dnl 74m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 75options BB060STUPIDROM # You need this, if you have a non-DraCo 76 # MC68060 with an OS ROM up to (at least) 77 # V40 (OS3.1) and want to boot with the 78 # bootblock. 79 # You do not need this if you have a DraCo, 80 # have no 68060 or NEVER use the bootblock 81options P5PPC68KBOARD # Phase5 PPC/68K board support 82')m4_dnl 83# 84# processors this kernel should support 85# 86options M68060 # support for 060 87options M060SP # MC68060 software support (Required for 060) 88m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 89options M68040 # support for 040 90options FPSP # MC68040 floating point support 91options M68030 # support for 030 92options M68020 # support for 020/851 93options FPU_EMULATE # FPU emulation 94')m4_dnl 95 96# 97# Networking options 98# 99options INET # IP networking support (Required) 100options INET6 # IPV6 101#options IPSEC # IP security 102#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 103#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 104#options IPSEC_DEBUG # debug for IP security 105#options GATEWAY # Packet forwarding 106#options DIRECTED_BROADCAST # Broadcast across subnets 107 108m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 109#options MROUTING # Multicast routing 110#options PIM # Protocol Independent Multicast 111options ISO,TPIP # OSI 112#options EON # OSI tunneling over IP 113options NETATALK # AppleTalk networking protocols 114#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 115')m4_dnl 116 117options PPP_BSDCOMP # BSD-Compress compression support for PPP 118options PPP_DEFLATE # Deflate compression support for PPP 119options PPP_FILTER # Active filter support for PPP (requires bpf) 120options PFIL_HOOKS # pfil(9) packet filter hooks 121options IPFILTER_LOG # ipmon(8) log support 122options IPFILTER_LOOKUP # ippool(8) support 123#options IPFILTER_DEFAULT_BLOCK # block all packets by default 124 125#options ALTQ # Manipulate network interfaces' output queues 126#options ALTQ_BLUE # Stochastic Fair Blue 127#options ALTQ_CBQ # Class-Based Queueing 128#options ALTQ_CDNR # Diffserv Traffic Conditioner 129#options ALTQ_FIFOQ # First-In First-Out Queue 130#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 131#options ALTQ_HFSC # Hierarchical Fair Service Curve 132#options ALTQ_LOCALQ # Local queueing discipline 133#options ALTQ_PRIQ # Priority Queueing 134#options ALTQ_RED # Random Early Detection 135#options ALTQ_RIO # RED with IN/OUT 136#options ALTQ_WFQ # Weighted Fair Queueing 137 138# Filesystems 139file-system FFS # Berkeley fast file system 140file-system EXT2FS # second extended file system (linux) 141#file-system LFS # log-structured filesystem (experimental) 142 143m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 144file-system MFS # Memory based filesystem 145')m4_dnl 146 147file-system NFS # Network File System client side code 148file-system ADOSFS # AmigaDOS file system 149file-system CD9660 # ISO 9660 + Rock Ridge filesystem 150file-system MSDOSFS # MS-DOS filesystem 151 152file-system KERNFS # kernel data-structure filesystem 153 154m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 155file-system FDESC # user file descriptor filesystem 156file-system NULLFS # loopback filesystem 157file-system OVERLAY # overlay filesystem 158#file-system PORTAL # Portal filesystem 159file-system PROCFS # /proc filesystem 160file-system UMAPFS # NULLFS + uid and gid remapping 161file-system UNION # union filesystem 162file-system SMBFS # experimental - CIFS; also needs nsmb (below) 163file-system PTYFS # /dev/pts/N support 164#file-system TMPFS # Efficient memory file-system 165#file-system UDF # experimental - OSTA UDF CD/DVD file-system 166')m4_dnl 167 168# Filesystem options 169 170#options FFS_EI # FFS Endian Independant support 171 172m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 173options QUOTA # User and group quotas in FFS 174options SOFTDEP # FFS soft updates support. 175#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 176options NFSSERVER # Network File System server side code 177#options FFS_NO_SNAPSHOT # No FFS snapshot support 178')m4_dnl 179 180#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 181 # immutable) behave as system flags. 182 183# 184# Compatibility options for various existing systems 185# 186 187m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 188#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 189options COMPAT_43 # compatibility with 4.3BSD interfaces 190options COMPAT_09 # compatibility with NetBSD 0.9 191options COMPAT_10 # compatibility with NetBSD 1.0 192options COMPAT_12 # compatibility with NetBSD 1.2 193options COMPAT_13 # compatibility with NetBSD 1.3 194options COMPAT_14 # compatibility with NetBSD 1.4 195options COMPAT_15 # compatibility with NetBSD 1.5 196options COMPAT_16 # compatibility with NetBSD 1.6 197options COMPAT_20 # compatibility with NetBSD 2.0 198options COMPAT_30 # NetBSD 3.0 compatibility. 199options COMPAT_40 # NetBSD 4.0 compatibility. 200options COMPAT_SUNOS # Support to run Sun (m68k) executables 201options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 202options COMPAT_NOMID # allow nonvalid machine id executables 203#options COMPAT_LINUX # Support to run Linux/m68k executables 204')m4_dnl 205 206options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 207options COMPAT_AOUT_M68K # actually make some system calls work. 208options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 209 210m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 211# 212# Support for System V IPC facilities. 213# 214options SYSVSHM # System V-like shared memory 215options SYSVMSG # System V-like messages 216options SYSVSEM # System V-like semaphores 217#options SEMMNI=10 # number of semaphore identifiers 218#options SEMMNS=60 # number of semaphores in system 219#options SEMUME=10 # max number of undo entries per process 220#options SEMMNU=30 # number of undo structures in system 221options P1003_1B_SEMAPHORE # p1003.1b semaphore support 222')m4_dnl 223 224# 225# Support for various kernel options 226# 227 228m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 229options KTRACE # system call tracing support 230options LKM # Loadable kernel modules 231')m4_dnl 232#options SYSTRACE # system call vetting via systrace(1) 233#options INSECURE # disable kernel security levels 234options SCSIVERBOSE # human readable SCSI error messages 235options USERCONF # userconf(4) support 236m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 237options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 238options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 239', `m4_dnl 240options NTP # NTP phase/frequency locked loop 241#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 242')m4_dnl 243 244# Enable experimental buffer queue strategy for better responsiveness under 245# high disk I/O load. Use it with caution - it's not proven to be stable yet. 246#options BUFQ_READPRIO 247#options BUFQ_PRIOCSCAN 248 249# 250# Misc. debugging options 251# 252options DDB # Kernel debugger 253#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 254#options DIAGNOSTIC # Extra kernel sanity checks 255#options DEBUG # Enable misc. kernel debugging code 256#options SYSCALL_DEBUG # debug all syscalls. 257#options SCSIDEBUG # Add SCSI debugging statements 258#options PANICBUTTON # Forced crash via keypress (?) 259 260# 261# Amiga specific options 262# 263#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 264 # first bank of RAM. (default: unlimited) 265#options NKPTADD=4 # set this for 4 additional KPT pages 266#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 267 # per 16 MB (1<<24 bytes) of RAM 268 # uncomment and decrease this, or uncomment and 269 # increase NKPTADD if you get "out of PT pages" 270 # panics. 271 272# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 273# before the 10 secondinterval ends, or that KBDRESET does work at all. 274#options KBDRESET # sync on Ctrl-Amiga-Amiga 275 276# These options improve performance with the built-in serial port 277# on slower Amigas. Try the larger buffers first then lev6_defer. 278#options SERIBUF_SIZE=4096 279#options SEROBUF_SIZE=32 280#options LEV6_DEFER # defers l6 to l4 (below serial l5) 281 282m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 283#options DEVRELOAD # implement /dev/reload 284# # currently only works for a.out kernels 285')m4_dnl 286 287options RETINACONSOLE # enable code to allow retina to be console 288m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 289options ULOWELLCONSOLE # enable code to allow a2410 to be console 290options CL5426CONSOLE # Cirrus console 291options CV64CONSOLE # CyberVision console 292options TSENGCONSOLE # Tseng console 293options CV3DCONSOLE # CyberVision 64/3D console 294 295options GRF_ECS # Enhanced Chip Set 296options GRF_NTSC # NTSC 297options GRF_PAL # PAL 298options GRF_A2024 # Support for the A2024 299options GRF_AGA # AGA Chip Set 300options GRF_AGA_VGA # AGA VGAONLY timing 301options GRF_SUPER72 # AGA Super-72 302')m4_dnl 303#options KFONT_8X11 # 8x11 font 304 305# select a font for the console according to the character set and keymap 306# you want to use 307options KFONT_CONS_ISO8859_1 308#options KFONT_CONS_ISO8859_2 309 310# This is how you would tell the kernel the A2410 oscillator frequencies: 311# The used frequencies are the defaults, and do not need option setting 312#options ULOWELL_OSC1=36000000 313#options ULOWELL_OSC2=66667000 314 315# This is how you specify the blitting speed, higher values may speed up blits 316# a littel bit. If you raise this value too much some trash may appear. 317# the commented version is the default. 318#options RH_MEMCLK=61000000 319# this option enables the 64 bit sprite which does not work 320# for quite a few people. E.g. The cursor sprite will turn to a block 321# when moved to the top of the screen in X. 322#options RH_64BIT_SPRITE 323# enables fast scroll code appears to now work on 040 systems. 324#options RETINA_SPEED_HACK 325# enables the Hardwarecursor which does not work on some systems. 326#options RH_HARDWARECURSOR 327 328m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 329# wscons aware interface to amiga custom chips. 330# If you enable it enable also wskbd. 331# 332m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 333amidisplaycc0 at mainbus0 # wscons interface to custom chips 334wsdisplay0 at amidisplaycc0 console ? 335options WSEMUL_VT100 336options FONT_VT220L8x10 337options FONT_VT220ISO8x16 338', ` 339#amidisplaycc0 at mainbus0 # wscons interface to custom chips 340#wsdisplay0 at amidisplaycc0 console ? 341#options WSEMUL_VT100 342#options FONT_VT220L8x10 343#options FONT_VT220ISO8x16 344')m4_dnl 345')m4_dnl 346 347m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl 348m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 349grfcc0 at mainbus0 # custom chips 350grfrt0 at zbus0 # retina II 351')m4_dnl 352grfrh0 at zbus0 # retina III 353m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 354grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 355grful0 at zbus0 # A2410 356grfcv0 at zbus0 # CyberVision 64 357grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 358grfcv3d0 at zbus0 # CyberVision 64/3D 359')m4_dnl 360 361m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 362grf0 at grfcc0 363grf1 at grfrt0 364')m4_dnl 365grf2 at grfrh0 366m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 367grf3 at grfcl? 368grf4 at grful0 369grf5 at grfcv0 370grf6 at grfet? 371grf7 at grfcv3d0 372ite0 at grf0 # terminal emulators for grfs 373ite1 at grf1 # terminal emulators for grfs 374')m4_dnl 375ite2 at grf2 # terminal emulators for grfs 376m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 377ite3 at grf3 # terminal emulators for grfs 378ite4 at grf4 # terminal emulators for grfs 379ite5 at grf5 # terminal emulators for grfs 380ite6 at grf6 # terminal emulators for grfs 381ite7 at grf7 # terminal emulators for grfs 382')m4_dnl 383')m4_dnl 384 385msc0 at zbus0 # A2232 MSC multiport serial. 386mfc0 at zbus0 # MultiFaceCard I/O board 387mfcs0 at mfc0 unit 0 # MFC serial 388mfcs1 at mfc0 unit 1 # MFC serial 389#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 390#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 391#mfcs2 at mfc1 unit 0 392#mfcs3 at mfc1 unit 1 393#mfcp1 at mfc1 unit 0 394 395hyper* at zbus? # zbus HyperCom3/3+/4/4+ 396#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 397com* at hyper? port ? # Hypercom3/4 serial ports 398lpt* at hyper? port ? # Hypercom3+/4+ parallel port 399 400#options IOBZCLOCK=22118400 # default, uncomment the next line 401#options IOBZCLOCK=24000000 # if needed. 402 403iobl* at zbus? # zbus IOBlix 404com* at iobl? port ? # IOBlix serial ports 405lpt* at iobl? port ? # IOBlix parallel ports 406 407 408# 409# Keyboard device. Optionally can attach a wskbd. 410# wskbd works together with a wsdisplay so enable them both if you will. 411# Don't enable wskbd if you use ite. 412# 413# XXX in std.amiga: kbd0 at mainbus0 414m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 415wskbd0 at kbd0 console ? 416', ` 417#wskbd0 at kbd0 console ? 418')m4_dnl 419 420 421m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 422# 423# Amiga Mainboard devices (sans graphics and keyboard) 424# 425 426ser0 at mainbus0 # Amiga onboard serial 427par0 at mainbus0 # Amiga onboard parallel 428ms* at mainbus0 # Amiga mice 429fdc0 at mainbus0 # Amiga FDC 430fd* at fdc0 unit ? # floppy disks on the later 431a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 432a2kbbc0 at mainbus0 # A2000 battery backed clock 433m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 434aucc* at mainbus0 # Amiga CC audio 435audio* at aucc? 436')m4_dnl 437')m4_dnl 438 439m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 440wsmouse* at ms? 441', ` 442#wsmouse* at ms? 443')m4_dnl 444 445m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 446# 447# DraCo Mainboard devices (sans keyboard) 448# 449 450drbbc0 at mainbus0 # DraCo battery backed clock 451drsupio0 at mainbus0 # DraCo superio chip 452com* at drsupio? port ? # DraCo serial 453lpt0 at drsupio? port ? # DraCo parallel 454')m4_dnl 455 456# 457# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 458# 459 460m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 461m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 462# Alas, Melody-Z2 dont configure in the DraCo bus. 463melody* at zbus0 # Melody MPEG audio decoder 464audio* at melody? 465')m4_dnl 466 467repulse* at zbus0 # ALiENDESiGN Repulse 468audio* at repulse? 469 470toccata* at zbus0 # MacroSystem GmbH Toccata 471audio* at toccata? 472')m4_dnl 473 474# Ethernet cards: 475le* at zbus0 # A2065, Ameristar, Ariadne 476ne* at zbus0 # AriadneII, X-surf 477ed* at zbus0 # Hydra, ASDG LanRover 478es* at zbus0 # CEI A4066 EthernetPLUS 479qn* at zbus0 # Quicknet 480 481# Arcnet 482bah* at zbus0 # C=/Ameristar A2060 / 560 483 484m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 485# Greater Valley Product Bus 486gvpbus* at zbus0 487 488# scsi stuff, all possible 489gtsc0 at gvpbus? # GVP series II scsi 490scsibus* at gtsc0 491ahsc0 at mainbus0 # A3000 scsi 492scsibus* at ahsc0 493atzsc0 at zbus0 # A2091 scsi 494scsibus* at atzsc0 495wstsc0 at zbus0 # Wordsync II scsi 496scsibus* at wstsc0 497ivsc0 at zbus0 # IVS scsi 498scsibus* at ivsc0 499mlhsc0 at zbus0 # Hacker scsi 500scsibus* at mlhsc0 501otgsc0 at zbus0 # 12 gauge scsi 502scsibus* at otgsc0 503zssc0 at zbus0 # Zeus scsi 504scsibus* at zssc0 505mgnsc0 at zbus0 # Magnum scsi 506scsibus* at mgnsc0 507wesc0 at zbus0 # Warp Engine scsi 508scsibus* at wesc0 509afsc0 at zbus0 # A4091 scsi 510scsibus* at afsc0 511aftsc0 at mainbus0 # A4000T scsi 512scsibus* at aftsc0 513flsc0 at zbus0 # FastlaneZ3 scsi 514scsibus* at flsc0 515bzsc0 at zbus0 # Blizzard 1230 I,II scsi 516scsibus* at bzsc0 517bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 518scsibus* at bzivsc0 519bztzsc0 at zbus0 # Blizzard 2060 scsi 520scsibus* at bztzsc0 521cbsc0 at zbus0 # CyberSCSI I 522scsibus* at cbsc0 523cbiisc0 at zbus0 # CyberSCSI II 524scsibus* at cbiisc0 525cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 526scsibus* at cbiiisc0 527empsc0 at zbus0 # Emplant scsi 528scsibus* at empsc0 529 530wdc0 at mainbus0 # A4000 & A1200 IDE bus 531atabus* at wdc? channel ? # ATA bus 532wd* at atabus? drive ? # + drives 533atapibus* at atabus? # ATAPI bus 534cd* at atapibus? drive ? # ATAPI CD-ROM drives 535sd* at atapibus? drive ? # ATAPI disk drives 536 537pccard0 at mainbus0 538pcmcia* at pccard0 539com* at pcmcia? function ? # Modems and serial cards 540pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 541aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 542wdc* at pcmcia? function ? 543awi* at pcmcia? function ? # BayStack 650 (802.11FH) 544ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 545mbe* at pcmcia? function ? # MB8696x based Ethernet 546ne* at pcmcia? function ? # NE2000-compatible Ethernet 547sm* at pcmcia? function ? # Megahertz Ethernet 548mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 549com* at mhzc? 550sm* at mhzc? 551 552')m4_dnl 553 554m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 555drsc0 at mainbus0 # DraCo scsi 556scsibus* at drsc0 557')m4_dnl 558 559 560# each hard drive from low target to high 561# will configure to the next available sd unit number 562sd* at scsibus? target ? lun ? # scsi disks 563st* at scsibus? target ? lun ? # scsi tapes 564cd* at scsibus? target ? lun ? # scsi cds 565ch* at scsibus? target ? lun ? # scsi autochangers 566m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 567ss* at scsibus? target ? lun ? # scsi scanner 568uk* at scsibus? target ? lun ? # scsi unknown 569')m4_dnl 570 571pseudo-device loop # loopback network interface 572pseudo-device sl # SLIP network interfaces 573pseudo-device ppp # PPP network interfaces 574pseudo-device pppoe # PPP over Ethernet (RFC 2516) 575pseudo-device tun # network tunnel line discipline 576pseudo-device tap # virtual Ethernet 577#pseudo-device gre # generic L3 over IP tunnel 578pseudo-device bpfilter # Berkeley packet filter 579#pseudo-device carp # Common Address Redundancy Protocol 580pseudo-device ipfilter # IP Filter package 581pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 582#pseudo-device faith # IPv[46] tcp relay translation i/f 583pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 584pseudo-device vlan # IEEE 802.1q encapsulation 585pseudo-device bridge # simple inter-network bridging 586#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 587pseudo-device agr # IEEE 802.3ad link aggregation 588#pseudo-device pf # PF packet filter 589#pseudo-device pflog # PF log if 590m4_ifdef(`GENERIC_CONFIGURATION', `m4_dnl 591pseudo-device fss 4 # file system snapshot device 592', `m4_dnl 593#pseudo-device fss 4 # file system snapshot device 594')m4_dnl 595 596pseudo-device view 4 # views (needed for grfcc) 597m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 598pseudo-device pty 2 # pseudo-terminals 599', `m4_dnl 600pseudo-device pty # pseudo-terminals 601')m4_dnl 602pseudo-device clockctl # user control of clock subsystem 603 604m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 605pseudo-device wsfont # wsfont(4) dynamic font loading support 606pseudo-device wsmux # mouse & keyboard multiplexor 607', `m4_dnl 608#pseudo-device wsfont # wsfont(4) dynamic font loading support 609#pseudo-device wsmux # mouse & keyboard multiplexor 610')m4_dnl 611 612pseudo-device vnd # vnode pseudo-disks 613#options VND_COMPRESSION # compressed vnd(4) 614pseudo-device ccd 4 # concatenated disk devices 615#pseudo-device cgd 4 # cryptographic disk devices 616pseudo-device raid 8 # RAIDframe disk driver 617options RAID_AUTOCONFIG # auto-configuration of RAID components 618# Options to enable various other RAIDframe RAID types. 619# options RF_INCLUDE_EVENODD=1 620# options RF_INCLUDE_RAID5_RS=1 621# options RF_INCLUDE_PARITYLOGGING=1 622# options RF_INCLUDE_CHAINDECLUSTER=1 623# options RF_INCLUDE_INTERDECLUSTER=1 624# options RF_INCLUDE_PARITY_DECLUSTERING=1 625# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 626 627pseudo-device rnd # /dev/random and in-kernel generator 628#options RND_COM # use "com" randomness as well (BROKEN) 629 630m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 631pseudo-device ksyms # /dev/ksyms (kernel symbols) 632pseudo-device nsmb # experimental - SMB requester 633')m4_dnl 634 635# Veriexec 636# 637# a pseudo device needed for veriexec 638#pseudo-device veriexec 1 639# 640# Uncomment the fingerprint methods below that are desired. Note that 641# removing fingerprint methods will have almost no impact on the kernel 642# code size. 643# 644#options VERIFIED_EXEC_FP_RMD160 645#options VERIFIED_EXEC_FP_SHA256 646#options VERIFIED_EXEC_FP_SHA384 647#options VERIFIED_EXEC_FP_SHA512 648#options VERIFIED_EXEC_FP_SHA1 649#options VERIFIED_EXEC_FP_MD5 650 651config netbsd root on ? type ? 652