GENERIC.in revision 1.91
1# $NetBSD: GENERIC.in,v 1.91 2012/01/10 20:29:50 rkujawa Exp $ 2# 3## 4# GENERIC machine description file 5# 6# This machine description file is used to generate the default NetBSD 7# kernel. The generic kernel does not include all options, subsystems 8# and device drivers, but should be useful for most applications. 9# 10# The machine description file can be customised for your specific 11# machine to reduce the kernel size and improve its performance. 12# 13# For further information on compiling NetBSD kernels, see the config(8) 14# man page. 15# 16# For further information on hardware support for this architecture, see 17# the intro(4) man page. For further information about kernel options 18# for this architecture, see the options(4) man page. For an explanation 19# of each device driver in this file see the section 4 man page for the 20# device. 21 22m4_divert(-1) 23# 24# GENERIC Amiga or DraCo 25# 26# This configuration file contains all possible options 27# 28# make AMIGA extracts the AMIGA configuration file. 29# make DRACO extracts the DRACO configuration file. 30# make GENERIC extracts the GENERIC configuration file. 31# make INSTALL extracts the INSTALL configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48 49m4_divert(0)m4_dnl 50 51include "arch/amiga/conf/std.amiga" 52 53options INCLUDE_CONFIG_FILE # embed config file in kernel binary 54 55#ident "GENERIC-$Revision: 1.91 $" 56 57m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 58makeoptions COPTS="-Os" 59')m4_dnl 60 61maxusers 8 62options RTC_OFFSET=0 63 64# 65# mainboards to support (in addition to Amiga) 66# 67m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 68options DRACO 69')m4_dnl 70m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 71options BB060STUPIDROM # You need this, if you have a non-DraCo 72 # MC68060 with an OS ROM up to (at least) 73 # V40 (OS3.1) and want to boot with the 74 # bootblock. 75 # You do not need this if you have a DraCo, 76 # have no 68060 or NEVER use the bootblock 77options P5PPC68KBOARD # Phase5 PPC/68K board support 78')m4_dnl 79# 80# processors this kernel should support 81# 82options M68060 # support for 060 83options M060SP # MC68060 software support (Required for 060) 84m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 85options M68040 # support for 040 86options FPSP # MC68040 floating point support 87options M68030 # support for 030 88options M68020 # support for 020/851 89options FPU_EMULATE # FPU emulation 90')m4_dnl 91 92# 93# Networking options 94# 95options INET # IP networking support (Required) 96options INET6 # IPV6 97#options IPSEC # IP security 98#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 99#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 100#options IPSEC_DEBUG # debug for IP security 101#options GATEWAY # Packet forwarding 102#options DIRECTED_BROADCAST # Broadcast across subnets 103 104m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 105#options MROUTING # Multicast routing 106#options PIM # Protocol Independent Multicast 107#options ISO,TPIP # OSI 108#options EON # OSI tunneling over IP 109options NETATALK # AppleTalk networking protocols 110#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 111')m4_dnl 112 113options PPP_BSDCOMP # BSD-Compress compression support for PPP 114options PPP_DEFLATE # Deflate compression support for PPP 115options PPP_FILTER # Active filter support for PPP (requires bpf) 116options PFIL_HOOKS # pfil(9) packet filter hooks 117options IPFILTER_LOG # ipmon(8) log support 118options IPFILTER_LOOKUP # ippool(8) support 119options IPFILTER_COMPAT # Compat for IP-Filter 120#options IPFILTER_DEFAULT_BLOCK # block all packets by default 121 122#options ALTQ # Manipulate network interfaces' output queues 123#options ALTQ_BLUE # Stochastic Fair Blue 124#options ALTQ_CBQ # Class-Based Queueing 125#options ALTQ_CDNR # Diffserv Traffic Conditioner 126#options ALTQ_FIFOQ # First-In First-Out Queue 127#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 128#options ALTQ_HFSC # Hierarchical Fair Service Curve 129#options ALTQ_LOCALQ # Local queueing discipline 130#options ALTQ_PRIQ # Priority Queueing 131#options ALTQ_RED # Random Early Detection 132#options ALTQ_RIO # RED with IN/OUT 133#options ALTQ_WFQ # Weighted Fair Queueing 134 135# Filesystems 136file-system FFS # Berkeley fast file system 137file-system EXT2FS # second extended file system (linux) 138#file-system LFS # log-structured filesystem (experimental) 139 140m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 141file-system MFS # Memory based filesystem 142')m4_dnl 143 144file-system NFS # Network File System client side code 145file-system ADOSFS # AmigaDOS file system 146file-system CD9660 # ISO 9660 + Rock Ridge filesystem 147file-system MSDOSFS # MS-DOS filesystem 148 149file-system KERNFS # kernel data-structure filesystem 150 151m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 152file-system FDESC # user file descriptor filesystem 153file-system NULLFS # loopback filesystem 154file-system OVERLAY # overlay filesystem 155file-system PROCFS # /proc filesystem 156file-system UMAPFS # NULLFS + uid and gid remapping 157file-system UNION # union filesystem 158file-system SMBFS # experimental - CIFS; also needs nsmb (below) 159file-system PTYFS # /dev/pts/N support 160file-system TMPFS # Efficient memory file-system 161#file-system UDF # experimental - OSTA UDF CD/DVD file-system 162')m4_dnl 163 164# Filesystem options 165 166#options FFS_EI # FFS Endian Independent support 167options WAPBL # File system journaling support 168 169m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 170options QUOTA # legacy UFS quotas 171options QUOTA2 # new, in-filesystem UFS quotas 172#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 173options NFSSERVER # Network File System server side code 174#options FFS_NO_SNAPSHOT # No FFS snapshot support 175')m4_dnl 176 177#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 178 # immutable) behave as system flags. 179 180# 181# Compatibility options for various existing systems 182# 183 184m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 185#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 186options COMPAT_43 # compatibility with 4.3BSD interfaces 187options COMPAT_09 # compatibility with NetBSD 0.9 188options COMPAT_10 # compatibility with NetBSD 1.0 189options COMPAT_12 # compatibility with NetBSD 1.2 190options COMPAT_13 # compatibility with NetBSD 1.3 191options COMPAT_14 # compatibility with NetBSD 1.4 192options COMPAT_15 # compatibility with NetBSD 1.5 193options COMPAT_16 # compatibility with NetBSD 1.6 194options COMPAT_20 # compatibility with NetBSD 2.0 195options COMPAT_30 # NetBSD 3.0 compatibility. 196options COMPAT_40 # NetBSD 4.0 compatibility. 197options COMPAT_50 # NetBSD 5.0 compatibility. 198options COMPAT_SUNOS # Support to run Sun (m68k) executables 199options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 200options COMPAT_NOMID # allow nonvalid machine id executables 201#options COMPAT_LINUX # Support to run Linux/m68k executables 202')m4_dnl 203 204options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 205options COMPAT_AOUT_M68K # actually make some system calls work. 206options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 207 208m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 209# 210# Support for System V IPC facilities. 211# 212options SYSVSHM # System V-like shared memory 213options SYSVMSG # System V-like messages 214options SYSVSEM # System V-like semaphores 215options P1003_1B_SEMAPHORE # p1003.1b semaphore support 216')m4_dnl 217 218# 219# Support for various kernel options 220# 221 222m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 223options KTRACE # system call tracing support 224')m4_dnl 225#options INSECURE # disable kernel security levels 226options SCSIVERBOSE # human readable SCSI error messages 227options USERCONF # userconf(4) support 228m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 229options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 230options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 231', `m4_dnl 232options NTP # NTP phase/frequency locked loop 233#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 234')m4_dnl 235 236# Enable experimental buffer queue strategy for better responsiveness under 237# high disk I/O load. Use it with caution - it's not proven to be stable yet. 238#options BUFQ_READPRIO 239#options BUFQ_PRIOCSCAN 240 241# 242# Misc. debugging options 243# 244options DDB # Kernel debugger 245#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 246#options DIAGNOSTIC # Extra kernel sanity checks 247#options DEBUG # Enable misc. kernel debugging code 248#options SYSCALL_DEBUG # debug all syscalls. 249#options SCSIDEBUG # Add SCSI debugging statements 250#options PANICBUTTON # Forced crash via keypress (?) 251 252# 253# Amiga specific options 254# 255#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 256 # first bank of RAM. (default: unlimited) 257#options NKPTADD=4 # set this for 4 additional KPT pages 258#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 259 # per 16 MB (1<<24 bytes) of RAM 260 # uncomment and decrease this, or uncomment and 261 # increase NKPTADD if you get "out of PT pages" 262 # panics. 263 264# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 265# before the 10 secondinterval ends, or that KBDRESET does work at all. 266#options KBDRESET # sync on Ctrl-Amiga-Amiga 267 268# These options improve performance with the built-in serial port 269# on slower Amigas. Try the larger buffers first then lev6_defer. 270#options SERIBUF_SIZE=4096 271#options SEROBUF_SIZE=32 272#options LEV6_DEFER # defers l6 to l4 (below serial l5) 273 274m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 275#options DEVRELOAD # implement /dev/reload 276# # currently only works for a.out kernels 277')m4_dnl 278 279options RETINACONSOLE # enable code to allow retina to be console 280m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 281options ULOWELLCONSOLE # enable code to allow a2410 to be console 282options CL5426CONSOLE # Cirrus console 283options CV64CONSOLE # CyberVision console 284options TSENGCONSOLE # Tseng console 285options CV3DCONSOLE # CyberVision 64/3D console 286 287options GRF_ECS # Enhanced Chip Set 288options GRF_NTSC # NTSC 289options GRF_PAL # PAL 290options GRF_A2024 # Support for the A2024 291options GRF_AGA # AGA Chip Set 292options GRF_AGA_VGA # AGA VGAONLY timing 293options GRF_SUPER72 # AGA Super-72 294')m4_dnl 295#options KFONT_8X11 # 8x11 font 296 297# select a font for the console according to the character set and keymap 298# you want to use 299options KFONT_CONS_ISO8859_1 300#options KFONT_CONS_ISO8859_2 301 302# This is how you would tell the kernel the A2410 oscillator frequencies: 303# The used frequencies are the defaults, and do not need option setting 304#options ULOWELL_OSC1=36000000 305#options ULOWELL_OSC2=66667000 306 307# This is how you specify the blitting speed, higher values may speed up blits 308# a littel bit. If you raise this value too much some trash may appear. 309# the commented version is the default. 310#options RH_MEMCLK=61000000 311# this option enables the 64 bit sprite which does not work 312# for quite a few people. E.g. The cursor sprite will turn to a block 313# when moved to the top of the screen in X. 314#options RH_64BIT_SPRITE 315# enables fast scroll code appears to now work on 040 systems. 316#options RETINA_SPEED_HACK 317# enables the Hardwarecursor which does not work on some systems. 318#options RH_HARDWARECURSOR 319 320m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 321# wscons aware interface to amiga custom chips. 322# If you enable it enable also wskbd. 323# 324#amidisplaycc0 at mainbus0 # wscons interface to custom chips 325#wsdisplay0 at amidisplaycc0 console ? 326#options WSEMUL_VT100 327#options FONT_VT220L8x10 328#options FONT_VT220ISO8x16 329')m4_dnl 330 331m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 332p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus 333 334grfcc0 at mainbus0 # custom chips 335grfrt0 at zbus0 # retina II 336')m4_dnl 337grfrh0 at zbus0 # retina III 338m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 339grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 340grful0 at zbus0 # A2410 341grfcv0 at zbus0 # CyberVision 64 342grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 343grfcv3d0 at zbus0 # CyberVision 64/3D 344')m4_dnl 345 346m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 347grf0 at grfcc0 348grf1 at grfrt0 349')m4_dnl 350grf2 at grfrh0 351m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 352grf3 at grfcl? 353grf4 at grful0 354grf5 at grfcv0 355grf6 at grfet? 356grf7 at grfcv3d0 357ite0 at grf0 # terminal emulators for grfs 358ite1 at grf1 # terminal emulators for grfs 359')m4_dnl 360ite2 at grf2 # terminal emulators for grfs 361m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 362ite3 at grf3 # terminal emulators for grfs 363ite4 at grf4 # terminal emulators for grfs 364ite5 at grf5 # terminal emulators for grfs 365ite6 at grf6 # terminal emulators for grfs 366ite7 at grf7 # terminal emulators for grfs 367 368#wsdisplay* at grf5 console ? # wsdisplay on top of grf (CV64) 369#wsdisplay* at grf7 console ? # wsdisplay on top of grf (CV64/3D) 370')m4_dnl 371 372msc0 at zbus0 # A2232 MSC multiport serial. 373mfc0 at zbus0 # MultiFaceCard I/O board 374mfcs0 at mfc0 unit 0 # MFC serial 375mfcs1 at mfc0 unit 1 # MFC serial 376#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 377#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 378#mfcs2 at mfc1 unit 0 379#mfcs3 at mfc1 unit 1 380#mfcp1 at mfc1 unit 0 381 382hyper* at zbus? # zbus HyperCom3/3+/4/4+ 383#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 384com* at hyper? port ? # Hypercom3/4 serial ports 385lpt* at hyper? port ? # Hypercom3+/4+ parallel port 386 387#options IOBZCLOCK=22118400 # default, uncomment the next line 388#options IOBZCLOCK=24000000 # if needed. 389 390iobl* at zbus? # zbus IOBlix 391com* at iobl? port ? # IOBlix serial ports 392lpt* at iobl? port ? # IOBlix parallel ports 393 394 395# 396# Keyboard device. Optionally can attach a wskbd. 397# wskbd works together with a wsdisplay so enable them both if you will. 398# Don't enable wskbd if you use ite. 399# 400# XXX in std.amiga: kbd0 at mainbus0 401#wskbd0 at kbd0 console ? 402 403 404m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 405# 406# Amiga Mainboard devices (sans graphics and keyboard) 407# 408 409ser0 at mainbus0 # Amiga onboard serial 410par0 at mainbus0 # Amiga onboard parallel 411ms* at mainbus0 # Amiga mice 412fdc0 at mainbus0 # Amiga FDC 413fd* at fdc0 unit ? # floppy disks on the later 414a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 415a2kbbc0 at mainbus0 # A2000 battery backed clock 416m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 417aucc* at mainbus0 # Amiga CC audio 418audio* at aucc? 419')m4_dnl 420')m4_dnl 421 422#wsmouse* at ms? 423 424m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 425# 426# DraCo Mainboard devices (sans keyboard) 427# 428 429drbbc0 at mainbus0 # DraCo battery backed clock 430drsupio0 at mainbus0 # DraCo superio chip 431com* at drsupio? port ? # DraCo serial 432lpt0 at drsupio? port ? # DraCo parallel 433')m4_dnl 434 435# 436# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 437# 438 439m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 440m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 441# Alas, Melody-Z2 dont configure in the DraCo bus. 442melody* at zbus0 # Melody MPEG audio decoder 443audio* at melody? 444')m4_dnl 445 446repulse* at zbus0 # ALiENDESiGN Repulse 447audio* at repulse? 448 449toccata* at zbus0 # MacroSystem GmbH Toccata 450audio* at toccata? 451')m4_dnl 452 453# Ethernet cards: 454le* at zbus0 # A2065, Ameristar, Ariadne 455ne* at zbus0 # AriadneII, X-surf 456ed* at zbus0 # Hydra, ASDG LanRover 457es* at zbus0 # CEI A4066 EthernetPLUS 458qn* at zbus0 # Quicknet 459 460# Arcnet 461bah* at zbus0 # C=/Ameristar A2060 / 560 462 463m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 464# Greater Valley Product Bus 465gvpbus* at zbus0 466 467# scsi stuff, all possible 468gtsc0 at gvpbus? # GVP series II scsi 469scsibus* at gtsc0 470ahsc0 at mainbus0 # A3000 scsi 471scsibus* at ahsc0 472atzsc0 at zbus0 # A2091 scsi 473scsibus* at atzsc0 474wstsc0 at zbus0 # Wordsync II scsi 475scsibus* at wstsc0 476ivsc0 at zbus0 # IVS scsi 477scsibus* at ivsc0 478mlhsc0 at zbus0 # Hacker scsi 479scsibus* at mlhsc0 480otgsc0 at zbus0 # 12 gauge scsi 481scsibus* at otgsc0 482zssc0 at zbus0 # Zeus scsi 483scsibus* at zssc0 484mgnsc0 at zbus0 # Magnum scsi 485scsibus* at mgnsc0 486wesc0 at zbus0 # Warp Engine scsi 487scsibus* at wesc0 488bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi 489scsibus* at bppcsc0 490afsc0 at zbus0 # A4091 scsi 491scsibus* at afsc0 492aftsc0 at mainbus0 # A4000T scsi 493scsibus* at aftsc0 494flsc0 at zbus0 # FastlaneZ3 scsi 495scsibus* at flsc0 496bzsc0 at zbus0 # Blizzard 1230 I,II scsi 497scsibus* at bzsc0 498bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 499scsibus* at bzivsc0 500bztzsc0 at zbus0 # Blizzard 2060 scsi 501scsibus* at bztzsc0 502cbsc0 at zbus0 # CyberSCSI I 503scsibus* at cbsc0 504cbiisc0 at zbus0 # CyberSCSI II 505scsibus* at cbiisc0 506cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 507scsibus* at cbiiisc0 508empsc0 at zbus0 # Emplant scsi 509scsibus* at empsc0 510 511wdc0 at mainbus0 # A4000 & A1200 IDE bus 512wdc* at zbus0 # Buddha / Catweasel 513efa0 at mainbus0 # ELBOX FastATA 1200 Mk-III/Mk-IV 514 515atabus* at wdc? channel ? # ATA bus 516atabus* at efa? channel ? # ATA bus 517wd* at atabus? drive ? # + drives 518atapibus* at atabus? # ATAPI bus 519cd* at atapibus? drive ? # ATAPI CD-ROM drives 520sd* at atapibus? drive ? # ATAPI disk drives 521 522pccard0 at mainbus0 523pcmcia* at pccard0 524com* at pcmcia? function ? # Modems and serial cards 525pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 526aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 527wdc* at pcmcia? function ? 528awi* at pcmcia? function ? # BayStack 650 (802.11FH) 529ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 530mbe* at pcmcia? function ? # MB8696x based Ethernet 531ne* at pcmcia? function ? # NE2000-compatible Ethernet 532sm* at pcmcia? function ? # Megahertz Ethernet 533mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 534com* at mhzc? 535sm* at mhzc? 536 537')m4_dnl 538 539m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 540drsc0 at mainbus0 # DraCo scsi 541scsibus* at drsc0 542')m4_dnl 543 544 545# each hard drive from low target to high 546# will configure to the next available sd unit number 547sd* at scsibus? target ? lun ? # scsi disks 548st* at scsibus? target ? lun ? # scsi tapes 549cd* at scsibus? target ? lun ? # scsi cds 550ch* at scsibus? target ? lun ? # scsi autochangers 551m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 552ss* at scsibus? target ? lun ? # scsi scanner 553uk* at scsibus? target ? lun ? # scsi unknown 554')m4_dnl 555m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 556 557# PCI bus support 558options PCIVERBOSE # verbose PCI device autoconfig messages 559#options PCI_CONFIG_DUMP 560options PCI_NETBSD_CONFIGURE # used only by mppb(4) 561 562p5pb0 at p5bus0 # Phase5 PCI bridge (CVPPC/BVPPC/G-REX) 563p5membar* at zbus0 # Phase5 PCI bridge autoconfiguring BARs 564#options P5PB_OLD_FIRMWARE # enable support for p5pb with old fw 565#options P5PB_GENFB # enable genfb support for CVPPC/BVPPC 566#options P5PB_DEBUG # enable excessive debug for p5pb 567pci* at p5pb0 568 569mppb* at zbus0 # Matay Prometheus Zorro-PCI bridge 570pci* at mppb? 571 572#genfb* at pci? # generic fb, CVPPC/BVPPC only 573ne* at pci? # NE2000 Ethernet 574 575# Bluetooth Controller and Device support 576# tested only with btuart on an A1200 577 578# Bluetooth PCMCIA Controllers 579bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A 580btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139 581 582# Bluetooth Device Hub 583bthub* at bcsp? 584bthub* at bt3c? 585bthub* at btbc? 586bthub* at btuart? 587 588# Bluetooth HID support 589bthidev* at bthub? 590 591# Bluetooth Mouse 592btms* at bthidev? reportid ? 593wsmouse* at btms? mux 0 594 595# Bluetooth Keyboard 596#btkbd* at bthidev? reportid ? 597#wskbd* at btkbd? console ? mux 1 598 599# Bluetooth Apple Magic Mouse 600btmagic* at bthub? 601wsmouse* at btmagic? mux 0 602 603# Bluetooth Audio support 604#btsco* at bthub? 605 606')m4_dnl 607m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 608# 609# accept filters 610pseudo-device accf_data # "dataready" accept filter 611pseudo-device accf_http # "httpready" accept filter 612')m4_dnl 613 614pseudo-device loop # loopback network interface 615pseudo-device sl # SLIP network interfaces 616pseudo-device ppp # PPP network interfaces 617pseudo-device pppoe # PPP over Ethernet (RFC 2516) 618pseudo-device tun # network tunnel line discipline 619pseudo-device tap # virtual Ethernet 620#pseudo-device gre # generic L3 over IP tunnel 621pseudo-device bpfilter # Berkeley packet filter 622#pseudo-device carp # Common Address Redundancy Protocol 623pseudo-device ipfilter # IP Filter package 624pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 625#pseudo-device faith # IPv[46] tcp relay translation i/f 626pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 627pseudo-device vlan # IEEE 802.1q encapsulation 628pseudo-device bridge # simple inter-network bridging 629#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 630pseudo-device agr # IEEE 802.3ad link aggregation 631#pseudo-device pf # PF packet filter 632#pseudo-device pflog # PF log if 633m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 634#pseudo-device fss # file system snapshot device 635', `m4_dnl 636pseudo-device fss # file system snapshot device 637')m4_dnl 638m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 639#pseudo-device putter # for puffs and pud 640', `m4_dnl 641pseudo-device putter # for puffs and pud 642')m4_dnl 643 644pseudo-device view 4 # views (needed for grfcc) 645m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 646pseudo-device pty 2 # pseudo-terminals 647', `m4_dnl 648pseudo-device pty # pseudo-terminals 649')m4_dnl 650pseudo-device clockctl # user control of clock subsystem 651 652#pseudo-device wsfont # wsfont(4) dynamic font loading support 653#pseudo-device wsmux # mouse & keyboard multiplexor 654 655pseudo-device vnd # vnode pseudo-disks 656#options VND_COMPRESSION # compressed vnd(4) 657pseudo-device ccd 4 # concatenated disk devices 658#pseudo-device cgd 4 # cryptographic disk devices 659pseudo-device raid 8 # RAIDframe disk driver 660options RAID_AUTOCONFIG # auto-configuration of RAID components 661# Options to enable various other RAIDframe RAID types. 662# options RF_INCLUDE_EVENODD=1 663# options RF_INCLUDE_RAID5_RS=1 664# options RF_INCLUDE_PARITYLOGGING=1 665# options RF_INCLUDE_CHAINDECLUSTER=1 666# options RF_INCLUDE_INTERDECLUSTER=1 667# options RF_INCLUDE_PARITY_DECLUSTERING=1 668# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 669 670#options RND_COM # use "com" randomness as well (BROKEN) 671 672m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 673pseudo-device ksyms # /dev/ksyms (kernel symbols) 674pseudo-device nsmb # experimental - SMB requester 675')m4_dnl 676m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 677pseudo-device bcsp # BlueCore Serial Protocol 678pseudo-device btuart # Bluetooth HCI UART (H4) 679')m4_dnl 680 681# Veriexec 682# 683# a pseudo device needed for veriexec 684#pseudo-device veriexec 1 685# 686# Uncomment the fingerprint methods below that are desired. Note that 687# removing fingerprint methods will have almost no impact on the kernel 688# code size. 689# 690#options VERIFIED_EXEC_FP_RMD160 691#options VERIFIED_EXEC_FP_SHA256 692#options VERIFIED_EXEC_FP_SHA384 693#options VERIFIED_EXEC_FP_SHA512 694#options VERIFIED_EXEC_FP_SHA1 695#options VERIFIED_EXEC_FP_MD5 696 697config netbsd root on ? type ? 698