GENERIC.in revision 1.22
1# $NetBSD: GENERIC.in,v 1.22 2004/06/26 07:32:05 abs Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21m4_divert(-1) 22# 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make GENERIC extracts the GENERIC configuration file. 30# make INSTALL extracts the INSTALL configuration file. 31# make WSCONS extracts the WSCONS configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48# If building WSCONS, uncomment various options 49# 50m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') 51 52 53m4_divert(0)m4_dnl 54 55include "arch/amiga/conf/std.amiga" 56 57options INCLUDE_CONFIG_FILE # embed config file in kernel binary 58 59#ident "GENERIC-$Revision: 1.22 $" 60 61m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 62makeoptions COPTS="-Os" 63')m4_dnl 64 65maxusers 8 66options RTC_OFFSET=0 67 68# 69# mainboards to support (in addition to Amiga) 70# 71m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 72options DRACO 73')m4_dnl 74m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 75options BB060STUPIDROM # You need this, if you have a non-DraCo 76 # MC68060 with an OS ROM up to (at least) 77 # V40 (OS3.1) and want to boot with the 78 # bootblock. 79 # You do not need this if you have a DraCo, 80 # have no 68060 or NEVER use the bootblock 81options P5PPC68KBOARD # Phase5 PPC/68K board support 82')m4_dnl 83# 84# processors this kernel should support 85# 86options M68060 # support for 060 87options M060SP # MC68060 software support (Required for 060) 88m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 89options M68040 # support for 040 90options FPSP # MC68040 floating point support 91options M68030 # support for 030 92options M68020 # support for 020/851 93options FPU_EMULATE # FPU emulation 94')m4_dnl 95 96# 97# Networking options 98# 99options INET # IP networking support (Required) 100options INET6 # IPV6 101#options IPSEC # IP security 102#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 103#options IPSEC_DEBUG # debug for IP security 104#options GATEWAY # Packet forwarding 105#options DIRECTED_BROADCAST # Broadcast across subnets 106 107m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 108#options MROUTING # Multicast routing 109options NS # XNS 110#options NSIP # XNS tunneling over IP 111options ISO,TPIP # OSI 112#options EON # OSI tunneling over IP 113options CCITT,LLC,HDLC # X.25 114options NETATALK # AppleTalk networking protocols 115#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 116')m4_dnl 117 118options PPP_BSDCOMP # BSD-Compress compression support for PPP 119options PPP_DEFLATE # Deflate compression support for PPP 120options PPP_FILTER # Active filter support for PPP (requires bpf) 121options PFIL_HOOKS # pfil(9) packet filter hooks 122options IPFILTER_LOG # ipmon(8) log support 123#options IPFILTER_DEFAULT_BLOCK # block all packets by default 124 125#options ALTQ # Manipulate network interfaces' output queues 126#options ALTQ_BLUE # Stochastic Fair Blue 127#options ALTQ_CBQ # Class-Based Queueing 128#options ALTQ_CDNR # Diffserv Traffic Conditioner 129#options ALTQ_FIFOQ # First-In First-Out Queue 130#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 131#options ALTQ_HFSC # Hierarchical Fair Service Curve 132#options ALTQ_LOCALQ # Local queueing discipline 133#options ALTQ_PRIQ # Priority Queueing 134#options ALTQ_RED # Random Early Detection 135#options ALTQ_RIO # RED with IN/OUT 136#options ALTQ_WFQ # Weighted Fair Queueing 137 138# Filesystems 139file-system FFS # Berkeley fast file system 140file-system EXT2FS # second extended file system (linux) 141#file-system LFS # log-structured filesystem (experimental) 142 143m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 144file-system MFS # Memory based filesystem 145')m4_dnl 146 147file-system NFS # Network File System client side code 148file-system ADOSFS # AmigaDOS file system 149file-system CD9660 # ISO 9660 + Rock Ridge filesystem 150file-system MSDOSFS # MS-DOS filesystem 151 152file-system KERNFS # kernel data-structure filesystem 153 154m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 155file-system FDESC # user file descriptor filesystem 156file-system NULLFS # loopback filesystem 157file-system OVERLAY # overlay filesystem 158#file-system PORTAL # Portal filesystem 159file-system PROCFS # /proc filesystem 160file-system UMAPFS # NULLFS + uid and gid remapping 161file-system UNION # union filesystem 162')m4_dnl 163 164# Filesystem options 165 166#options FFS_EI # FFS Endian Independant support 167 168m4_ifdef(`INSTALL_CONFIGURATION', ` 169options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 170', `m4_dnl 171options QUOTA # User and group quotas in FFS 172options SOFTDEP # FFS soft updates support. 173options NFSSERVER # Network File System server side code 174')m4_dnl 175 176#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 177 # immutable) behave as system flags. 178 179# 180# Compatibility options for various existing systems 181# 182 183m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 184#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 185options COMPAT_43 # compatibility with 4.3BSD interfaces 186options COMPAT_09 # compatibility with NetBSD 0.9 187options COMPAT_10 # compatibility with NetBSD 1.0 188options COMPAT_12 # compatibility with NetBSD 1.2 189options COMPAT_13 # compatibility with NetBSD 1.3 190options COMPAT_14 # compatibility with NetBSD 1.4 191options COMPAT_15 # compatibility with NetBSD 1.5 192options COMPAT_16 # compatibility with NetBSD 1.6 193options COMPAT_SUNOS # Support to run Sun (m68k) executables 194options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 195options COMPAT_NOMID # allow nonvalid machine id executables 196#options COMPAT_LINUX # Support to run Linux/m68k executables 197')m4_dnl 198 199options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 200options COMPAT_AOUT_M68K # actually make some system calls work. 201 202m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 203# 204# Support for System V IPC facilities. 205# 206options SYSVSHM # System V-like shared memory 207options SYSVMSG # System V-like messages 208options SYSVSEM # System V-like semaphores 209#options SEMMNI=10 # number of semaphore identifiers 210#options SEMMNS=60 # number of semaphores in system 211#options SEMUME=10 # max number of undo entries per process 212#options SEMMNU=30 # number of undo structures in system 213')m4_dnl 214 215# 216# Support for various kernel options 217# 218 219m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 220options KTRACE # system call tracing support 221options SYSTRACE # system call vetting via systrace(1) 222options LKM # Loadable kernel modules 223')m4_dnl 224#options INSECURE # disable kernel security levels 225options SCSIVERBOSE # human readable SCSI error messages 226options USERCONF # userconf(4) support 227m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 228options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 229options MALLOC_NOINLINE # Not inlining MALLOC saves memory 230', `m4_dnl 231options NTP # NTP phase/frequency locked loop 232#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 233')m4_dnl 234 235# Enable experimental buffer queue strategy for better responsiveness under 236# high disk I/O load. Use it with caution - it's not proven to be stable yet. 237#options NEW_BUFQ_STRATEGY 238 239# 240# Misc. debugging options 241# 242options DDB # Kernel debugger 243#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 244options DIAGNOSTIC # Extra kernel sanity checks 245#options DEBUG # Enable misc. kernel debugging code 246#options SYSCALL_DEBUG # debug all syscalls. 247#options SCSIDEBUG # Add SCSI debugging statements 248#options PANICBUTTON # Forced crash via keypress (?) 249 250# 251# Amiga specific options 252# 253#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 254 # first bank of RAM. (default: unlimited) 255#options NKPTADD=4 # set this for 4 additional KPT pages 256#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 257 # per 16 MB (1<<24 bytes) of RAM 258 # uncomment and decrease this, or uncomment and 259 # increase NKPTADD if you get "out of PT pages" 260 # panics. 261 262# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 263# before the 10 secondinterval ends, or that KBDRESET does work at all. 264#options KBDRESET # sync on Ctrl-Amiga-Amiga 265 266# These options improve performance with the built-in serial port 267# on slower Amigas. Try the larger buffers first then lev6_defer. 268#options SERIBUF_SIZE=4096 269#options SEROBUF_SIZE=32 270#options LEV6_DEFER # defers l6 to l4 (below serial l5) 271 272m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 273#options DEVRELOAD # implement /dev/reload 274# # currently only works for a.out kernels 275')m4_dnl 276 277options RETINACONSOLE # enable code to allow retina to be console 278m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 279options ULOWELLCONSOLE # enable code to allow a2410 to be console 280options CL5426CONSOLE # Cirrus console 281options CV64CONSOLE # CyberVision console 282options TSENGCONSOLE # Tseng console 283options CV3DCONSOLE # CyberVision 64/3D console 284 285options GRF_ECS # Enhanced Chip Set 286options GRF_NTSC # NTSC 287options GRF_PAL # PAL 288options GRF_A2024 # Support for the A2024 289options GRF_AGA # AGA Chip Set 290options GRF_AGA_VGA # AGA VGAONLY timing 291options GRF_SUPER72 # AGA Super-72 292')m4_dnl 293#options KFONT_8X11 # 8x11 font 294 295# select a font for the console according to the character set and keymap 296# you want to use 297options KFONT_CONS_ISO8859_1 298#options KFONT_CONS_ISO8859_2 299 300# This is how you would tell the kernel the A2410 oscillator frequencies: 301# The used frequencies are the defaults, and do not need option setting 302#options ULOWELL_OSC1=36000000 303#options ULOWELL_OSC2=66667000 304 305# This is how you specify the blitting speed, higher values may speed up blits 306# a littel bit. If you raise this value too much some trash may appear. 307# the commented version is the default. 308#options RH_MEMCLK=61000000 309# this option enables the 64 bit sprite which does not work 310# for quite a few people. E.g. The cursor sprite will turn to a block 311# when moved to the top of the screen in X. 312#options RH_64BIT_SPRITE 313# enables fast scroll code appears to now work on 040 systems. 314#options RETINA_SPEED_HACK 315# enables the Hardwarecursor which does not work on some systems. 316#options RH_HARDWARECURSOR 317 318m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 319# wscons aware interface to amiga custom chips. 320# If you enable it enable also wskbd. 321# 322m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 323amidisplaycc0 at mainbus0 # wscons interface to custom chips 324wsdisplay0 at amidisplaycc0 console ? 325options WSEMUL_VT100 326options FONT_VT220L8x10 327options FONT_VT220ISO8x16 328', ` 329#amidisplaycc0 at mainbus0 # wscons interface to custom chips 330#wsdisplay0 at amidisplaycc0 console ? 331#options WSEMUL_VT100 332#options FONT_VT220L8x10 333#options FONT_VT220ISO8x16 334')m4_dnl 335')m4_dnl 336 337m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl 338m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 339grfcc0 at mainbus0 # custom chips 340grfrt0 at zbus0 # retina II 341')m4_dnl 342grfrh0 at zbus0 # retina III 343m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 344grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 345grful0 at zbus0 # A2410 346grfcv0 at zbus0 # CyberVision 64 347grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 348grfcv3d0 at zbus0 # CyberVision 64/3D 349')m4_dnl 350 351m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 352grf0 at grfcc0 353grf1 at grfrt0 354')m4_dnl 355grf2 at grfrh0 356m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 357grf3 at grfcl? 358grf4 at grful0 359grf5 at grfcv0 360grf6 at grfet? 361grf7 at grfcv3d0 362ite0 at grf0 # terminal emulators for grfs 363ite1 at grf1 # terminal emulators for grfs 364')m4_dnl 365ite2 at grf2 # terminal emulators for grfs 366m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 367ite3 at grf3 # terminal emulators for grfs 368ite4 at grf4 # terminal emulators for grfs 369ite5 at grf5 # terminal emulators for grfs 370ite6 at grf6 # terminal emulators for grfs 371ite7 at grf7 # terminal emulators for grfs 372')m4_dnl 373')m4_dnl 374 375msc0 at zbus0 # A2232 MSC multiport serial. 376mfc0 at zbus0 # MultiFaceCard I/O board 377mfcs0 at mfc0 unit 0 # MFC serial 378mfcs1 at mfc0 unit 1 # MFC serial 379#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 380#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 381#mfcs2 at mfc1 unit 0 382#mfcs3 at mfc1 unit 1 383#mfcp1 at mfc1 unit 0 384 385hyper* at zbus? # zbus HyperCom3/3+/4/4+ 386#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 387com* at hyper? port ? # Hypercom3/4 serial ports 388lpt* at hyper? port ? # Hypercom3+/4+ parallel port 389 390#options IOBZCLOCK=22118400 # default, uncomment the next line 391#options IOBZCLOCK=24000000 # if needed. 392 393iobl* at zbus? # zbus IOBlix 394com* at iobl? port ? # IOBlix serial ports 395lpt* at iobl? port ? # IOBlix parallel ports 396 397 398# 399# Keyboard device. Optionally can attach a wskbd. 400# wskbd works together with a wsdisplay so enable them both if you will. 401# Don't enable wskbd if you use ite. 402# 403# XXX in std.amiga: kbd0 at mainbus0 404m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 405wskbd0 at kbd0 console ? 406', ` 407#wskbd0 at kbd0 console ? 408')m4_dnl 409 410 411m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 412# 413# Amiga Mainboard devices (sans graphics and keyboard) 414# 415 416ser0 at mainbus0 # Amiga onboard serial 417par0 at mainbus0 # Amiga onboard parallel 418ms* at mainbus0 # Amiga mice 419fdc0 at mainbus0 # Amiga FDC 420fd* at fdc0 unit ? # floppy disks on the later 421a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 422a2kbbc0 at mainbus0 # A2000 battery backed clock 423m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 424aucc* at mainbus0 # Amiga CC audio 425audio* at aucc? 426')m4_dnl 427')m4_dnl 428 429m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 430wsmouse* at ms? 431', ` 432#wsmouse* at ms? 433')m4_dnl 434 435m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 436# 437# DraCo Mainboard devices (sans keyboard) 438# 439 440drbbc0 at mainbus0 # DraCo battery backed clock 441drsupio0 at mainbus0 # DraCo superio chip 442com* at drsupio? port ? # DraCo serial 443lpt0 at drsupio? port ? # DraCo parallel 444')m4_dnl 445 446# 447# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 448# 449 450m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 451m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 452# Alas, Melody-Z2 dont configure in the DraCo bus. 453melody* at zbus0 # Melody MPEG audio decoder 454audio* at melody? 455')m4_dnl 456 457repulse* at zbus0 # ALiENDESiGN Repulse 458audio* at repulse? 459 460toccata* at zbus0 # MacroSystem GmbH Toccata 461audio* at toccata? 462')m4_dnl 463 464# Ethernet cards: 465le* at zbus0 # A2065, Ameristar, Ariadne 466ne* at zbus0 # AriadneII, X-surf 467ed* at zbus0 # Hydra, ASDG LanRover 468es* at zbus0 # CEI A4066 EthernetPLUS 469qn* at zbus0 # Quicknet 470 471# Arcnet 472bah* at zbus0 # C=/Ameristar A2060 / 560 473 474m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 475# Greater Valley Product Bus 476gvpbus* at zbus0 477 478# scsi stuff, all possible 479gtsc0 at gvpbus? # GVP series II scsi 480scsibus* at gtsc0 481ahsc0 at mainbus0 # A3000 scsi 482scsibus* at ahsc0 483atzsc0 at zbus0 # A2091 scsi 484scsibus* at atzsc0 485wstsc0 at zbus0 # Wordsync II scsi 486scsibus* at wstsc0 487ivsc0 at zbus0 # IVS scsi 488scsibus* at ivsc0 489mlhsc0 at zbus0 # Hacker scsi 490scsibus* at mlhsc0 491otgsc0 at zbus0 # 12 gauge scsi 492scsibus* at otgsc0 493zssc0 at zbus0 # Zeus scsi 494scsibus* at zssc0 495mgnsc0 at zbus0 # Magnum scsi 496scsibus* at mgnsc0 497wesc0 at zbus0 # Warp Engine scsi 498scsibus* at wesc0 499afsc0 at zbus0 # A4091 scsi 500scsibus* at afsc0 501aftsc0 at mainbus0 # A4000T scsi 502scsibus* at aftsc0 503flsc0 at zbus0 # FastlaneZ3 scsi 504scsibus* at flsc0 505bzsc0 at zbus0 # Blizzard 1230 I,II scsi 506scsibus* at bzsc0 507bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 508scsibus* at bzivsc0 509bztzsc0 at zbus0 # Blizzard 2060 scsi 510scsibus* at bztzsc0 511cbsc0 at zbus0 # CyberSCSI I 512scsibus* at cbsc0 513cbiisc0 at zbus0 # CyberSCSI II 514scsibus* at cbiisc0 515cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 516scsibus* at cbiiisc0 517empsc0 at zbus0 # Emplant scsi 518scsibus* at empsc0 519#idesc0 at mainbus0 # A4000 & A1200 IDE 520#scsibus* at idesc0 521 522# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 523# <<< are uncommented >>> 524wdc0 at mainbus0 # A4000 & A1200 IDE bus 525atabus* at wdc? channel ? # ATA bus 526wd* at atabus? drive ? # + drives 527atapibus* at atabus? # ATAPI bus 528cd* at atapibus? drive ? # ATAPI CD-ROM drives 529sd* at atapibus? drive ? # ATAPI disk drives 530 531pccard0 at mainbus0 532pcmcia* at pccard0 533com* at pcmcia? function ? # Modems and serial cards 534pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 535aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 536wdc* at pcmcia? function ? 537awi* at pcmcia? function ? # BayStack 650 (802.11FH) 538ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 539mbe* at pcmcia? function ? # MB8696x based Ethernet 540ne* at pcmcia? function ? # NE2000-compatible Ethernet 541sm* at pcmcia? function ? # Megahertz Ethernet 542mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 543com* at mhzc? 544sm* at mhzc? 545 546')m4_dnl 547 548m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 549drsc0 at mainbus0 # DraCo scsi 550scsibus* at drsc0 551')m4_dnl 552 553 554# each hard drive from low target to high 555# will configure to the next available sd unit number 556sd* at scsibus? target ? lun ? # scsi disks 557st* at scsibus? target ? lun ? # scsi tapes 558cd* at scsibus? target ? lun ? # scsi cds 559ch* at scsibus? target ? lun ? # scsi autochangers 560m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 561ss* at scsibus? target ? lun ? # scsi scanner 562uk* at scsibus? target ? lun ? # scsi unknown 563')m4_dnl 564 565pseudo-device loop # loopback network interface 566pseudo-device sl 1 # SLIP network interfaces 567pseudo-device ppp 1 # PPP network interfaces 568pseudo-device pppoe # PPP over Ethernet (RFC 2516) 569pseudo-device tun 1 # network tunnel line discipline 570#pseudo-device gre 2 # generic L3 over IP tunnel 571pseudo-device bpfilter 16 # Berkeley packet filter 572pseudo-device ipfilter # IP Filter package 573pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 574#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 575#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 576pseudo-device vlan # IEEE 802.1q encapsulation 577pseudo-device bridge # simple inter-network bridging 578#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 579#pseudo-device pf # PF packet filter 580#pseudo-device pflog # PF log if 581 582pseudo-device view 4 # views (needed for grfcc) 583m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 584pseudo-device pty 2 # pseudo-terminals 585', `m4_dnl 586pseudo-device pty # pseudo-terminals 587')m4_dnl 588pseudo-device clockctl # user control of clock subsystem 589 590m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 591pseudo-device wsfont # wsfont(4) dynamic font loading support 592', `m4_dnl 593#pseudo-device wsfont # wsfont(4) dynamic font loading support 594')m4_dnl 595 596pseudo-device vnd 4 # vnode pseudo-disks 597pseudo-device ccd 4 # concatenated disk devices 598#pseudo-device cgd 4 # cryptographic disk devices 599pseudo-device raid 8 # RAIDframe disk driver 600options RAID_AUTOCONFIG # auto-configuration of RAID components 601# Options to enable various other RAIDframe RAID types. 602# options RF_INCLUDE_EVENODD=1 603# options RF_INCLUDE_RAID5_RS=1 604# options RF_INCLUDE_PARITYLOGGING=1 605# options RF_INCLUDE_CHAINDECLUSTER=1 606# options RF_INCLUDE_INTERDECLUSTER=1 607# options RF_INCLUDE_PARITY_DECLUSTERING=1 608# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 609 610pseudo-device rnd # /dev/random and in-kernel generator 611#options RND_COM # use "com" randomness as well (BROKEN) 612 613m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 614pseudo-device ksyms # /dev/ksyms (kernel symbols) 615')m4_dnl 616 617config netbsd root on ? type ? 618