GENERIC.in revision 1.24
1# $NetBSD: GENERIC.in,v 1.24 2004/07/15 03:53:45 atatat Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21m4_divert(-1) 22# 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make GENERIC extracts the GENERIC configuration file. 30# make INSTALL extracts the INSTALL configuration file. 31# make WSCONS extracts the WSCONS configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48# If building WSCONS, uncomment various options 49# 50m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') 51 52 53m4_divert(0)m4_dnl 54 55include "arch/amiga/conf/std.amiga" 56 57options INCLUDE_CONFIG_FILE # embed config file in kernel binary 58 59#ident "GENERIC-$Revision: 1.24 $" 60 61m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 62makeoptions COPTS="-Os" 63')m4_dnl 64 65maxusers 8 66options RTC_OFFSET=0 67 68# 69# mainboards to support (in addition to Amiga) 70# 71m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 72options DRACO 73')m4_dnl 74m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 75options BB060STUPIDROM # You need this, if you have a non-DraCo 76 # MC68060 with an OS ROM up to (at least) 77 # V40 (OS3.1) and want to boot with the 78 # bootblock. 79 # You do not need this if you have a DraCo, 80 # have no 68060 or NEVER use the bootblock 81options P5PPC68KBOARD # Phase5 PPC/68K board support 82')m4_dnl 83# 84# processors this kernel should support 85# 86options M68060 # support for 060 87options M060SP # MC68060 software support (Required for 060) 88m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 89options M68040 # support for 040 90options FPSP # MC68040 floating point support 91options M68030 # support for 030 92options M68020 # support for 020/851 93options FPU_EMULATE # FPU emulation 94')m4_dnl 95 96# 97# Networking options 98# 99options INET # IP networking support (Required) 100options INET6 # IPV6 101#options IPSEC # IP security 102#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 103#options IPSEC_DEBUG # debug for IP security 104#options GATEWAY # Packet forwarding 105#options DIRECTED_BROADCAST # Broadcast across subnets 106 107m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 108#options MROUTING # Multicast routing 109options NS # XNS 110#options NSIP # XNS tunneling over IP 111options ISO,TPIP # OSI 112#options EON # OSI tunneling over IP 113options CCITT,LLC,HDLC # X.25 114options NETATALK # AppleTalk networking protocols 115#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 116')m4_dnl 117 118options PPP_BSDCOMP # BSD-Compress compression support for PPP 119options PPP_DEFLATE # Deflate compression support for PPP 120options PPP_FILTER # Active filter support for PPP (requires bpf) 121options PFIL_HOOKS # pfil(9) packet filter hooks 122options IPFILTER_LOG # ipmon(8) log support 123#options IPFILTER_DEFAULT_BLOCK # block all packets by default 124 125#options ALTQ # Manipulate network interfaces' output queues 126#options ALTQ_BLUE # Stochastic Fair Blue 127#options ALTQ_CBQ # Class-Based Queueing 128#options ALTQ_CDNR # Diffserv Traffic Conditioner 129#options ALTQ_FIFOQ # First-In First-Out Queue 130#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 131#options ALTQ_HFSC # Hierarchical Fair Service Curve 132#options ALTQ_LOCALQ # Local queueing discipline 133#options ALTQ_PRIQ # Priority Queueing 134#options ALTQ_RED # Random Early Detection 135#options ALTQ_RIO # RED with IN/OUT 136#options ALTQ_WFQ # Weighted Fair Queueing 137 138# Filesystems 139file-system FFS # Berkeley fast file system 140file-system EXT2FS # second extended file system (linux) 141#file-system LFS # log-structured filesystem (experimental) 142 143m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 144file-system MFS # Memory based filesystem 145')m4_dnl 146 147file-system NFS # Network File System client side code 148file-system ADOSFS # AmigaDOS file system 149file-system CD9660 # ISO 9660 + Rock Ridge filesystem 150file-system MSDOSFS # MS-DOS filesystem 151 152file-system KERNFS # kernel data-structure filesystem 153 154m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 155file-system FDESC # user file descriptor filesystem 156file-system NULLFS # loopback filesystem 157file-system OVERLAY # overlay filesystem 158#file-system PORTAL # Portal filesystem 159file-system PROCFS # /proc filesystem 160file-system UMAPFS # NULLFS + uid and gid remapping 161file-system UNION # union filesystem 162')m4_dnl 163 164# Filesystem options 165 166#options FFS_EI # FFS Endian Independant support 167 168m4_ifdef(`INSTALL_CONFIGURATION', ` 169options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 170', `m4_dnl 171options QUOTA # User and group quotas in FFS 172options SOFTDEP # FFS soft updates support. 173options NFSSERVER # Network File System server side code 174')m4_dnl 175 176#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 177 # immutable) behave as system flags. 178 179# 180# Compatibility options for various existing systems 181# 182 183m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 184#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 185options COMPAT_43 # compatibility with 4.3BSD interfaces 186options COMPAT_09 # compatibility with NetBSD 0.9 187options COMPAT_10 # compatibility with NetBSD 1.0 188options COMPAT_12 # compatibility with NetBSD 1.2 189options COMPAT_13 # compatibility with NetBSD 1.3 190options COMPAT_14 # compatibility with NetBSD 1.4 191options COMPAT_15 # compatibility with NetBSD 1.5 192options COMPAT_16 # compatibility with NetBSD 1.6 193options COMPAT_SUNOS # Support to run Sun (m68k) executables 194options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 195options COMPAT_NOMID # allow nonvalid machine id executables 196#options COMPAT_LINUX # Support to run Linux/m68k executables 197')m4_dnl 198 199options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 200options COMPAT_AOUT_M68K # actually make some system calls work. 201 202m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 203# 204# Support for System V IPC facilities. 205# 206options SYSVSHM # System V-like shared memory 207options SYSVMSG # System V-like messages 208options SYSVSEM # System V-like semaphores 209#options SEMMNI=10 # number of semaphore identifiers 210#options SEMMNS=60 # number of semaphores in system 211#options SEMUME=10 # max number of undo entries per process 212#options SEMMNU=30 # number of undo structures in system 213options P1003_1B_SEMAPHORE # p1003.1b semaphore support 214')m4_dnl 215 216# 217# Support for various kernel options 218# 219 220m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 221options KTRACE # system call tracing support 222options SYSTRACE # system call vetting via systrace(1) 223options LKM # Loadable kernel modules 224')m4_dnl 225#options INSECURE # disable kernel security levels 226options SCSIVERBOSE # human readable SCSI error messages 227options USERCONF # userconf(4) support 228m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 229options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 230options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 231options MALLOC_NOINLINE # Not inlining MALLOC saves memory 232', `m4_dnl 233options NTP # NTP phase/frequency locked loop 234#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 235')m4_dnl 236 237# Enable experimental buffer queue strategy for better responsiveness under 238# high disk I/O load. Use it with caution - it's not proven to be stable yet. 239#options NEW_BUFQ_STRATEGY 240 241# 242# Misc. debugging options 243# 244options DDB # Kernel debugger 245#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 246options DIAGNOSTIC # Extra kernel sanity checks 247#options DEBUG # Enable misc. kernel debugging code 248#options SYSCALL_DEBUG # debug all syscalls. 249#options SCSIDEBUG # Add SCSI debugging statements 250#options PANICBUTTON # Forced crash via keypress (?) 251 252# 253# Amiga specific options 254# 255#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 256 # first bank of RAM. (default: unlimited) 257#options NKPTADD=4 # set this for 4 additional KPT pages 258#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 259 # per 16 MB (1<<24 bytes) of RAM 260 # uncomment and decrease this, or uncomment and 261 # increase NKPTADD if you get "out of PT pages" 262 # panics. 263 264# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 265# before the 10 secondinterval ends, or that KBDRESET does work at all. 266#options KBDRESET # sync on Ctrl-Amiga-Amiga 267 268# These options improve performance with the built-in serial port 269# on slower Amigas. Try the larger buffers first then lev6_defer. 270#options SERIBUF_SIZE=4096 271#options SEROBUF_SIZE=32 272#options LEV6_DEFER # defers l6 to l4 (below serial l5) 273 274m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 275#options DEVRELOAD # implement /dev/reload 276# # currently only works for a.out kernels 277')m4_dnl 278 279options RETINACONSOLE # enable code to allow retina to be console 280m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 281options ULOWELLCONSOLE # enable code to allow a2410 to be console 282options CL5426CONSOLE # Cirrus console 283options CV64CONSOLE # CyberVision console 284options TSENGCONSOLE # Tseng console 285options CV3DCONSOLE # CyberVision 64/3D console 286 287options GRF_ECS # Enhanced Chip Set 288options GRF_NTSC # NTSC 289options GRF_PAL # PAL 290options GRF_A2024 # Support for the A2024 291options GRF_AGA # AGA Chip Set 292options GRF_AGA_VGA # AGA VGAONLY timing 293options GRF_SUPER72 # AGA Super-72 294')m4_dnl 295#options KFONT_8X11 # 8x11 font 296 297# select a font for the console according to the character set and keymap 298# you want to use 299options KFONT_CONS_ISO8859_1 300#options KFONT_CONS_ISO8859_2 301 302# This is how you would tell the kernel the A2410 oscillator frequencies: 303# The used frequencies are the defaults, and do not need option setting 304#options ULOWELL_OSC1=36000000 305#options ULOWELL_OSC2=66667000 306 307# This is how you specify the blitting speed, higher values may speed up blits 308# a littel bit. If you raise this value too much some trash may appear. 309# the commented version is the default. 310#options RH_MEMCLK=61000000 311# this option enables the 64 bit sprite which does not work 312# for quite a few people. E.g. The cursor sprite will turn to a block 313# when moved to the top of the screen in X. 314#options RH_64BIT_SPRITE 315# enables fast scroll code appears to now work on 040 systems. 316#options RETINA_SPEED_HACK 317# enables the Hardwarecursor which does not work on some systems. 318#options RH_HARDWARECURSOR 319 320m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 321# wscons aware interface to amiga custom chips. 322# If you enable it enable also wskbd. 323# 324m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 325amidisplaycc0 at mainbus0 # wscons interface to custom chips 326wsdisplay0 at amidisplaycc0 console ? 327options WSEMUL_VT100 328options FONT_VT220L8x10 329options FONT_VT220ISO8x16 330', ` 331#amidisplaycc0 at mainbus0 # wscons interface to custom chips 332#wsdisplay0 at amidisplaycc0 console ? 333#options WSEMUL_VT100 334#options FONT_VT220L8x10 335#options FONT_VT220ISO8x16 336')m4_dnl 337')m4_dnl 338 339m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl 340m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 341grfcc0 at mainbus0 # custom chips 342grfrt0 at zbus0 # retina II 343')m4_dnl 344grfrh0 at zbus0 # retina III 345m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 346grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 347grful0 at zbus0 # A2410 348grfcv0 at zbus0 # CyberVision 64 349grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 350grfcv3d0 at zbus0 # CyberVision 64/3D 351')m4_dnl 352 353m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 354grf0 at grfcc0 355grf1 at grfrt0 356')m4_dnl 357grf2 at grfrh0 358m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 359grf3 at grfcl? 360grf4 at grful0 361grf5 at grfcv0 362grf6 at grfet? 363grf7 at grfcv3d0 364ite0 at grf0 # terminal emulators for grfs 365ite1 at grf1 # terminal emulators for grfs 366')m4_dnl 367ite2 at grf2 # terminal emulators for grfs 368m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 369ite3 at grf3 # terminal emulators for grfs 370ite4 at grf4 # terminal emulators for grfs 371ite5 at grf5 # terminal emulators for grfs 372ite6 at grf6 # terminal emulators for grfs 373ite7 at grf7 # terminal emulators for grfs 374')m4_dnl 375')m4_dnl 376 377msc0 at zbus0 # A2232 MSC multiport serial. 378mfc0 at zbus0 # MultiFaceCard I/O board 379mfcs0 at mfc0 unit 0 # MFC serial 380mfcs1 at mfc0 unit 1 # MFC serial 381#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 382#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 383#mfcs2 at mfc1 unit 0 384#mfcs3 at mfc1 unit 1 385#mfcp1 at mfc1 unit 0 386 387hyper* at zbus? # zbus HyperCom3/3+/4/4+ 388#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 389com* at hyper? port ? # Hypercom3/4 serial ports 390lpt* at hyper? port ? # Hypercom3+/4+ parallel port 391 392#options IOBZCLOCK=22118400 # default, uncomment the next line 393#options IOBZCLOCK=24000000 # if needed. 394 395iobl* at zbus? # zbus IOBlix 396com* at iobl? port ? # IOBlix serial ports 397lpt* at iobl? port ? # IOBlix parallel ports 398 399 400# 401# Keyboard device. Optionally can attach a wskbd. 402# wskbd works together with a wsdisplay so enable them both if you will. 403# Don't enable wskbd if you use ite. 404# 405# XXX in std.amiga: kbd0 at mainbus0 406m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 407wskbd0 at kbd0 console ? 408', ` 409#wskbd0 at kbd0 console ? 410')m4_dnl 411 412 413m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 414# 415# Amiga Mainboard devices (sans graphics and keyboard) 416# 417 418ser0 at mainbus0 # Amiga onboard serial 419par0 at mainbus0 # Amiga onboard parallel 420ms* at mainbus0 # Amiga mice 421fdc0 at mainbus0 # Amiga FDC 422fd* at fdc0 unit ? # floppy disks on the later 423a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 424a2kbbc0 at mainbus0 # A2000 battery backed clock 425m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 426aucc* at mainbus0 # Amiga CC audio 427audio* at aucc? 428')m4_dnl 429')m4_dnl 430 431m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 432wsmouse* at ms? 433', ` 434#wsmouse* at ms? 435')m4_dnl 436 437m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 438# 439# DraCo Mainboard devices (sans keyboard) 440# 441 442drbbc0 at mainbus0 # DraCo battery backed clock 443drsupio0 at mainbus0 # DraCo superio chip 444com* at drsupio? port ? # DraCo serial 445lpt0 at drsupio? port ? # DraCo parallel 446')m4_dnl 447 448# 449# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 450# 451 452m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 453m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 454# Alas, Melody-Z2 dont configure in the DraCo bus. 455melody* at zbus0 # Melody MPEG audio decoder 456audio* at melody? 457')m4_dnl 458 459repulse* at zbus0 # ALiENDESiGN Repulse 460audio* at repulse? 461 462toccata* at zbus0 # MacroSystem GmbH Toccata 463audio* at toccata? 464')m4_dnl 465 466# Ethernet cards: 467le* at zbus0 # A2065, Ameristar, Ariadne 468ne* at zbus0 # AriadneII, X-surf 469ed* at zbus0 # Hydra, ASDG LanRover 470es* at zbus0 # CEI A4066 EthernetPLUS 471qn* at zbus0 # Quicknet 472 473# Arcnet 474bah* at zbus0 # C=/Ameristar A2060 / 560 475 476m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 477# Greater Valley Product Bus 478gvpbus* at zbus0 479 480# scsi stuff, all possible 481gtsc0 at gvpbus? # GVP series II scsi 482scsibus* at gtsc0 483ahsc0 at mainbus0 # A3000 scsi 484scsibus* at ahsc0 485atzsc0 at zbus0 # A2091 scsi 486scsibus* at atzsc0 487wstsc0 at zbus0 # Wordsync II scsi 488scsibus* at wstsc0 489ivsc0 at zbus0 # IVS scsi 490scsibus* at ivsc0 491mlhsc0 at zbus0 # Hacker scsi 492scsibus* at mlhsc0 493otgsc0 at zbus0 # 12 gauge scsi 494scsibus* at otgsc0 495zssc0 at zbus0 # Zeus scsi 496scsibus* at zssc0 497mgnsc0 at zbus0 # Magnum scsi 498scsibus* at mgnsc0 499wesc0 at zbus0 # Warp Engine scsi 500scsibus* at wesc0 501afsc0 at zbus0 # A4091 scsi 502scsibus* at afsc0 503aftsc0 at mainbus0 # A4000T scsi 504scsibus* at aftsc0 505flsc0 at zbus0 # FastlaneZ3 scsi 506scsibus* at flsc0 507bzsc0 at zbus0 # Blizzard 1230 I,II scsi 508scsibus* at bzsc0 509bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 510scsibus* at bzivsc0 511bztzsc0 at zbus0 # Blizzard 2060 scsi 512scsibus* at bztzsc0 513cbsc0 at zbus0 # CyberSCSI I 514scsibus* at cbsc0 515cbiisc0 at zbus0 # CyberSCSI II 516scsibus* at cbiisc0 517cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 518scsibus* at cbiiisc0 519empsc0 at zbus0 # Emplant scsi 520scsibus* at empsc0 521#idesc0 at mainbus0 # A4000 & A1200 IDE 522#scsibus* at idesc0 523 524# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 525# <<< are uncommented >>> 526wdc0 at mainbus0 # A4000 & A1200 IDE bus 527atabus* at wdc? channel ? # ATA bus 528wd* at atabus? drive ? # + drives 529atapibus* at atabus? # ATAPI bus 530cd* at atapibus? drive ? # ATAPI CD-ROM drives 531sd* at atapibus? drive ? # ATAPI disk drives 532 533pccard0 at mainbus0 534pcmcia* at pccard0 535com* at pcmcia? function ? # Modems and serial cards 536pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 537aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 538wdc* at pcmcia? function ? 539awi* at pcmcia? function ? # BayStack 650 (802.11FH) 540ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 541mbe* at pcmcia? function ? # MB8696x based Ethernet 542ne* at pcmcia? function ? # NE2000-compatible Ethernet 543sm* at pcmcia? function ? # Megahertz Ethernet 544mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 545com* at mhzc? 546sm* at mhzc? 547 548')m4_dnl 549 550m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 551drsc0 at mainbus0 # DraCo scsi 552scsibus* at drsc0 553')m4_dnl 554 555 556# each hard drive from low target to high 557# will configure to the next available sd unit number 558sd* at scsibus? target ? lun ? # scsi disks 559st* at scsibus? target ? lun ? # scsi tapes 560cd* at scsibus? target ? lun ? # scsi cds 561ch* at scsibus? target ? lun ? # scsi autochangers 562m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 563ss* at scsibus? target ? lun ? # scsi scanner 564uk* at scsibus? target ? lun ? # scsi unknown 565')m4_dnl 566 567pseudo-device loop # loopback network interface 568pseudo-device sl 1 # SLIP network interfaces 569pseudo-device ppp 1 # PPP network interfaces 570pseudo-device pppoe # PPP over Ethernet (RFC 2516) 571pseudo-device tun 1 # network tunnel line discipline 572#pseudo-device gre 2 # generic L3 over IP tunnel 573pseudo-device bpfilter 16 # Berkeley packet filter 574pseudo-device ipfilter # IP Filter package 575pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 576#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 577#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 578pseudo-device vlan # IEEE 802.1q encapsulation 579pseudo-device bridge # simple inter-network bridging 580#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 581#pseudo-device pf # PF packet filter 582#pseudo-device pflog # PF log if 583 584pseudo-device view 4 # views (needed for grfcc) 585m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 586pseudo-device pty 2 # pseudo-terminals 587', `m4_dnl 588pseudo-device pty # pseudo-terminals 589')m4_dnl 590pseudo-device clockctl # user control of clock subsystem 591 592m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 593pseudo-device wsfont # wsfont(4) dynamic font loading support 594', `m4_dnl 595#pseudo-device wsfont # wsfont(4) dynamic font loading support 596')m4_dnl 597 598pseudo-device vnd 4 # vnode pseudo-disks 599pseudo-device ccd 4 # concatenated disk devices 600#pseudo-device cgd 4 # cryptographic disk devices 601pseudo-device raid 8 # RAIDframe disk driver 602options RAID_AUTOCONFIG # auto-configuration of RAID components 603# Options to enable various other RAIDframe RAID types. 604# options RF_INCLUDE_EVENODD=1 605# options RF_INCLUDE_RAID5_RS=1 606# options RF_INCLUDE_PARITYLOGGING=1 607# options RF_INCLUDE_CHAINDECLUSTER=1 608# options RF_INCLUDE_INTERDECLUSTER=1 609# options RF_INCLUDE_PARITY_DECLUSTERING=1 610# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 611 612pseudo-device rnd # /dev/random and in-kernel generator 613#options RND_COM # use "com" randomness as well (BROKEN) 614 615m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 616pseudo-device ksyms # /dev/ksyms (kernel symbols) 617')m4_dnl 618 619config netbsd root on ? type ? 620