GENERIC.in revision 1.108
1# $NetBSD: GENERIC.in,v 1.108 2013/01/28 14:54:51 rkujawa Exp $
2#
3##
4# GENERIC machine description file
5#
6# This machine description file is used to generate the default NetBSD
7# kernel.  The generic kernel does not include all options, subsystems
8# and device drivers, but should be useful for most applications.
9#
10# The machine description file can be customised for your specific
11# machine to reduce the kernel size and improve its performance.
12#
13# For further information on compiling NetBSD kernels, see the config(8)
14# man page.
15#
16# For further information on hardware support for this architecture, see
17# the intro(4) man page.  For further information about kernel options
18# for this architecture, see the options(4) man page.  For an explanation
19# of each device driver in this file see the section 4 man page for the
20# device.
21
22m4_divert(-1)
23#
24# GENERIC Amiga or DraCo
25#
26# This configuration file contains all possible options
27#
28# make AMIGA extracts the AMIGA configuration file.
29# make DRACO extracts the DRACO configuration file.
30# make GENERIC extracts the GENERIC configuration file.
31# make INSTALL extracts the INSTALL configuration file.
32#
33# commit them, too.
34#
35
36# Define XXX_CONFIGURATION
37#
38m4_define(M4_Target`_CONFIGURATION', `')
39
40# If not building AMIGA, set DRACO_CONFIGURATION
41#
42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')')
43
44# If not building DRACO, set AMIGA_CONFIGURATION
45#
46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')')
47
48
49m4_divert(0)m4_dnl
50
51include "arch/amiga/conf/std.amiga"
52
53options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
54
55#ident 		"GENERIC-$Revision: 1.108 $"
56
57m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl
58makeoptions	COPTS="-Os"
59')m4_dnl
60
61maxusers	8
62options 	RTC_OFFSET=0
63
64#
65# mainboards to support (in addition to Amiga)
66#
67m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl
68options 	DRACO
69')m4_dnl
70m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
71options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
72				# MC68060 with an OS ROM up to (at least)
73				# V40 (OS3.1) and want to boot with the
74				# bootblock.
75				# You do not need this if you have a DraCo,
76				# have no 68060 or NEVER use the bootblock
77options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
78')m4_dnl
79#
80# processors this kernel should support
81#
82options 	M68060		# support for 060
83options 	M060SP		# MC68060 software support (Required for 060)
84m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
85options 	M68040		# support for 040
86options 	FPSP		# MC68040 floating point support
87options 	M68030		# support for 030
88options 	M68020		# support for 020/851
89options 	FPU_EMULATE	# FPU emulation
90')m4_dnl
91
92#
93# Networking options
94#
95options 	INET		# IP networking support (Required)
96options 	INET6		# IPV6
97#options 	IPSEC		# IP security
98#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
99#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
100#options 	IPSEC_DEBUG	# debug for IP security
101#options 	GATEWAY		# Packet forwarding
102#options 	DIRECTED_BROADCAST	# Broadcast across subnets
103
104m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
105#options 	MROUTING	# Multicast routing
106#options 	PIM		# Protocol Independent Multicast
107#options 	ISO,TPIP	# OSI
108#options 	EON		# OSI tunneling over IP
109options 	NETATALK	# AppleTalk networking protocols
110#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
111')m4_dnl
112
113options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
114options 	PPP_DEFLATE	# Deflate compression support for PPP
115options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
116options 	PFIL_HOOKS	# pfil(9) packet filter hooks
117options 	IPFILTER_LOG	# ipmon(8) log support
118options 	IPFILTER_LOOKUP	# ippool(8) support
119options 	IPFILTER_COMPAT # Compat for IP-Filter
120#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
121
122#options 	ALTQ		# Manipulate network interfaces' output queues
123#options 	ALTQ_BLUE	# Stochastic Fair Blue
124#options 	ALTQ_CBQ	# Class-Based Queueing
125#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
126#options 	ALTQ_FIFOQ	# First-In First-Out Queue
127#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
128#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
129#options 	ALTQ_LOCALQ	# Local queueing discipline
130#options 	ALTQ_PRIQ	# Priority Queueing
131#options 	ALTQ_RED	# Random Early Detection
132#options 	ALTQ_RIO	# RED with IN/OUT
133#options 	ALTQ_WFQ	# Weighted Fair Queueing
134
135# Filesystems
136file-system 	FFS		# Berkeley fast file system
137file-system 	EXT2FS		# second extended file system (linux)
138#file-system 	LFS		# log-structured filesystem (experimental)
139
140m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
141file-system 	MFS		# Memory based filesystem
142')m4_dnl
143
144file-system 	NFS		# Network File System client side code
145file-system 	ADOSFS		# AmigaDOS file system
146file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
147file-system 	MSDOSFS		# MS-DOS filesystem
148
149file-system 	KERNFS		# kernel data-structure filesystem
150
151m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
152file-system 	FDESC		# user file descriptor filesystem
153file-system 	NULLFS		# loopback filesystem
154file-system 	OVERLAY		# overlay filesystem
155file-system 	PROCFS		# /proc filesystem
156file-system 	UMAPFS		# NULLFS + uid and gid remapping
157file-system 	UNION		# union filesystem
158file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)
159file-system	PTYFS		# /dev/pts/N support
160file-system	TMPFS		# Efficient memory file-system
161#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
162')m4_dnl
163
164# Filesystem options
165
166#options 	FFS_EI		# FFS Endian Independent support
167options 	WAPBL		# File system journaling support
168
169m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
170options 	QUOTA		# legacy UFS quotas
171options 	QUOTA2		# new, in-filesystem UFS quotas
172#options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
173options 	NFSSERVER	# Network File System server side code
174#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
175')m4_dnl
176
177#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
178				# immutable) behave as system flags.
179
180#
181# Compatibility options for various existing systems
182#
183
184m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
185#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
186options 	COMPAT_43	# compatibility with 4.3BSD interfaces
187options 	COMPAT_09	# compatibility with NetBSD 0.9
188options 	COMPAT_10	# compatibility with NetBSD 1.0
189options 	COMPAT_12	# compatibility with NetBSD 1.2
190options 	COMPAT_13	# compatibility with NetBSD 1.3
191options 	COMPAT_14	# compatibility with NetBSD 1.4
192options 	COMPAT_15	# compatibility with NetBSD 1.5
193options 	COMPAT_16	# compatibility with NetBSD 1.6
194options 	COMPAT_20	# compatibility with NetBSD 2.0
195options 	COMPAT_30	# NetBSD 3.0 compatibility.
196options 	COMPAT_40	# NetBSD 4.0 compatibility.
197options 	COMPAT_50	# NetBSD 5.0 compatibility.
198options 	COMPAT_60	# NetBSD 6.0 compatibility.
199options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
200options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
201options 	COMPAT_NOMID	# allow nonvalid machine id executables
202#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
203')m4_dnl
204
205options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
206options 	COMPAT_AOUT_M68K # actually make some system calls work.
207options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
208
209m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
210#
211# Support for System V IPC facilities.
212#
213options 	SYSVSHM		# System V-like shared memory
214options 	SYSVMSG		# System V-like messages
215options 	SYSVSEM		# System V-like semaphores
216')m4_dnl
217
218#
219# Support for various kernel options
220#
221
222m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
223options 	KTRACE		# system call tracing support
224')m4_dnl
225#options 	INSECURE	# disable kernel security levels
226options 	SCSIVERBOSE	# human readable SCSI error messages
227options 	USERCONF	# userconf(4) support
228m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl
229options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
230options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
231', `m4_dnl
232options 	NTP		# NTP phase/frequency locked loop
233#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
234')m4_dnl
235
236# Enable experimental buffer queue strategy for better responsiveness under 
237# high disk I/O load. Use it with caution - it's not proven to be stable yet.
238#options 	BUFQ_READPRIO
239#options 	BUFQ_PRIOCSCAN
240
241#
242# Misc. debugging options
243#
244options 	DDB		# Kernel debugger
245#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
246#options 	DIAGNOSTIC	# Extra kernel sanity checks
247#options 	DEBUG		# Enable misc. kernel debugging code
248#options 	SYSCALL_DEBUG	# debug all syscalls.
249#options 	SCSIDEBUG	# Add SCSI debugging statements
250#options 	PANICBUTTON	# Forced crash via keypress (?)
251
252#
253# Amiga specific options
254#
255#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
256				# first bank of RAM. (default: unlimited)
257#options 	NKPTADD=4	# set this for 4 additional KPT pages
258#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
259				# per 16 MB (1<<24 bytes) of RAM
260				# uncomment and decrease this, or uncomment and
261				# increase NKPTADD if you get "out of PT pages"
262				# panics.
263
264# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
265# before the 10 secondinterval ends, or that KBDRESET does work at all.
266#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
267
268# These options improve performance with the built-in serial port
269# on slower Amigas.  Try the larger buffers first then lev6_defer.
270#options 	SERIBUF_SIZE=4096
271#options 	SEROBUF_SIZE=32
272#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
273
274m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
275#options	DEVRELOAD	# implement /dev/reload
276#				# currently only works for a.out kernels
277')m4_dnl
278
279options 	RETINACONSOLE	# enable code to allow retina to be console
280m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
281options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
282options 	CL5426CONSOLE	# Cirrus console
283options 	CV64CONSOLE	# CyberVision console
284options 	TSENGCONSOLE	# Tseng console
285options 	CV3DCONSOLE	# CyberVision 64/3D console
286
287options 	GRF_ECS		# Enhanced Chip Set
288options 	GRF_NTSC	# NTSC
289options 	GRF_PAL		# PAL
290options 	GRF_A2024	# Support for the A2024
291options 	GRF_AGA		# AGA Chip Set
292options 	GRF_AGA_VGA	# AGA VGAONLY timing
293options 	GRF_SUPER72	# AGA Super-72
294')m4_dnl
295#options 	KFONT_8X11	# 8x11 font
296
297# select a font for the console according to the character set and keymap
298# you want to use
299options        KFONT_CONS_ISO8859_1
300#options         KFONT_CONS_ISO8859_2
301
302# This is how you would tell the kernel the A2410 oscillator frequencies:
303# The used frequencies are the defaults, and do not need option setting
304#options 	ULOWELL_OSC1=36000000
305#options 	ULOWELL_OSC2=66667000
306
307# This is how you specify the blitting speed, higher values may speed up blits
308# a littel bit.  If you raise this value too much some trash may appear.
309# the commented version is the default.
310#options 	RH_MEMCLK=61000000
311# this option enables the 64 bit sprite which does not work
312# for quite a few people.  E.g. The cursor sprite will turn to a block
313# when moved to the top of the screen in X.
314#options 	RH_64BIT_SPRITE
315# enables fast scroll code appears to now work on 040 systems.
316#options 	RETINA_SPEED_HACK
317# enables the Hardwarecursor which does not work on some systems.
318#options 	RH_HARDWARECURSOR
319
320m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
321# wscons aware interface to amiga custom chips.
322# If you enable it enable also wskbd.
323#
324#amidisplaycc0	at mainbus0		# wscons interface to custom chips
325#wsdisplay0	at amidisplaycc0 console ?
326#options 	WSEMUL_VT100
327#options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
328#options 	FONT_VT220L8x10
329#options	FONT_VT220ISO8x16
330')m4_dnl
331
332m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
333#z3rambd*	at zbus0		# Zorro III RAM block devices
334#altmem*	at z3rambd?
335
336p5bus0		at zbus0		# Phase5 CSPPC/BPPC internal bus
337
338grfcc0		at mainbus0		# custom chips
339grfrt0		at zbus0		# retina II
340')m4_dnl
341grfrh0		at zbus0		# retina III
342m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
343grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
344grful0		at zbus0		# A2410
345grfcv0		at zbus0		# CyberVision 64
346grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
347grfcv3d0	at zbus0		# CyberVision 64/3D
348')m4_dnl
349
350m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
351grf0		at grfcc0
352grf1		at grfrt0
353')m4_dnl
354grf2		at grfrh0
355m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
356grf3		at grfcl?
357grf4		at grful0
358grf5		at grfcv0
359grf6		at grfet?
360grf7		at grfcv3d0
361ite0		at grf0			# terminal emulators for grfs
362ite1		at grf1			# terminal emulators for grfs
363')m4_dnl
364ite2		at grf2			# terminal emulators for grfs
365m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
366ite3		at grf3			# terminal emulators for grfs
367ite4		at grf4			# terminal emulators for grfs
368ite5		at grf5			# terminal emulators for grfs
369ite6		at grf6			# terminal emulators for grfs
370ite7		at grf7			# terminal emulators for grfs
371
372#wsdisplay*	at grf5 console ?	# wsdisplay on top of grf (CV64)
373#wsdisplay*	at grf7 console ?	# wsdisplay on top of grf (CV64/3D)
374')m4_dnl
375
376msc0		at zbus0		# A2232 MSC multiport serial.
377mfc0		at zbus0		# MultiFaceCard I/O board
378mfcs0		at mfc0 unit 0		# MFC serial
379mfcs1		at mfc0 unit 1		# MFC serial
380#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
381#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
382#mfcs2		at mfc1 unit 0
383#mfcs3		at mfc1 unit 1
384#mfcp1		at mfc1 unit 0
385
386hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
387#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
388com*		at hyper? port ?	# Hypercom3/4 serial ports
389lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
390
391#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
392#options 	IOBZCLOCK=24000000	# if needed.
393
394iobl*		at zbus?		# zbus IOBlix
395com*		at iobl? port ?		# IOBlix serial ports
396lpt*		at iobl? port ?		# IOBlix parallel ports
397
398
399#
400# Keyboard device. Optionally can attach a wskbd.
401# wskbd works together with a wsdisplay so enable them both if you will.
402# Don't enable wskbd if you use ite.
403#
404# XXX in std.amiga: kbd0 at mainbus0
405#wskbd0		at kbd0 console ?
406
407
408m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
409#
410# Amiga Mainboard devices (sans graphics and keyboard)
411#
412
413ser0		at mainbus0		# Amiga onboard serial
414par0		at mainbus0		# Amiga onboard parallel
415ms*		at mainbus0		# Amiga mice
416fdc0		at mainbus0		# Amiga FDC
417fd*		at fdc0 unit ?		# floppy disks on the later
418a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
419a2kbbc0 	at mainbus0		# A2000 battery backed clock
420m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
421aucc*		at mainbus0		# Amiga CC audio
422audio*		at aucc?
423
424a1k2cp0         at mainbus0             # A1200 on-board clockport
425clockport*      at a1k2cp0
426
427#com*            at clockport?           # Individual Computers SilverSurfer
428')m4_dnl
429')m4_dnl
430
431#wsmouse*	at ms?
432
433m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl
434#
435# DraCo Mainboard devices (sans keyboard)
436#
437
438drbbc0		at mainbus0		# DraCo battery backed clock
439drsupio0	at mainbus0		# DraCo superio chip
440com*		at drsupio? port ?	# DraCo serial
441lpt0		at drsupio? port ?	# DraCo parallel
442')m4_dnl
443
444#
445# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
446#
447
448m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
449m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl
450# Alas, Melody-Z2 dont configure in the DraCo bus.
451melody* 	at zbus0		# Melody MPEG audio decoder
452audio*		at melody?
453')m4_dnl
454
455repulse*	at zbus0		# ALiENDESiGN Repulse
456audio*		at repulse?
457
458toccata*	at zbus0		# MacroSystem GmbH Toccata
459audio*		at toccata?
460')m4_dnl
461
462# Ethernet cards:
463le*		at zbus0		# A2065, Ameristar, Ariadne
464ne*		at zbus0		# AriadneII
465ed*		at zbus0		# Hydra, ASDG LanRover
466es*		at zbus0		# CEI A4066 EthernetPLUS
467qn*		at zbus0		# Quicknet
468
469xsurf*		at zbus0		# X-Surf
470ne*		at xsurfbus?		# NE2000 chip on X-Surf
471gencp*		at xsurfbus?		# clockports on X-Surf
472wdc*		at xsurfbus?		# IDE on X-Surf
473clockport*	at gencp?
474
475# Arcnet
476bah*		at zbus0		# C=/Ameristar A2060 / 560
477
478m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
479# Greater Valley Product Bus
480gvpbus* 	at zbus0
481
482# scsi stuff, all possible
483gtsc0		at gvpbus?		# GVP series II scsi
484scsibus*	at gtsc0
485ahsc0		at mainbus0		# A3000 scsi
486scsibus*	at ahsc0
487atzsc0		at zbus0		# A2091 scsi
488scsibus*	at atzsc0
489wstsc0		at zbus0		# Wordsync II scsi
490scsibus*	at wstsc0
491ivsc0		at zbus0		# IVS scsi
492scsibus*	at ivsc0
493mlhsc0		at zbus0		# Hacker scsi
494scsibus*	at mlhsc0
495otgsc0		at zbus0		# 12 gauge scsi
496scsibus*	at otgsc0
497zssc0		at zbus0		# Zeus scsi
498scsibus*	at zssc0
499mgnsc0		at zbus0		# Magnum scsi
500scsibus*	at mgnsc0
501wesc0		at zbus0		# Warp Engine scsi
502scsibus*	at wesc0
503bppcsc0		at p5bus0		# BlizzardPPC 603e+ scsi
504scsibus*	at bppcsc0
505afsc0		at zbus0		# A4091 scsi
506scsibus*	at afsc0
507aftsc0		at mainbus0		# A4000T scsi
508scsibus*	at aftsc0
509flsc0		at zbus0		# FastlaneZ3 scsi
510scsibus*	at flsc0
511bzsc0		at zbus0		# Blizzard 1230 I,II scsi
512scsibus*	at bzsc0
513bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
514scsibus*	at bzivsc0
515bztzsc0 	at zbus0		# Blizzard 2060 scsi
516scsibus*	at bztzsc0
517cbsc0		at zbus0		# CyberSCSI I
518scsibus*	at cbsc0
519cbiisc0 	at zbus0		# CyberSCSI II
520scsibus*	at cbiisc0
521cbiiisc0 	at p5bus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
522scsibus*	at cbiiisc0
523empsc0		at zbus0		# Emplant scsi
524scsibus*	at empsc0
525
526wdc0		at mainbus0		# A4000 & A1200 IDE bus
527wdc*		at zbus0		# Buddha / Catweasel
528#efa0		at mainbus0		# ELBOX FastATA 1200 Mk-III/Mk-IV 
529
530atabus* 	at wdc? channel ?	# ATA bus
531#atabus*	at efa? channel ?	# ATA bus 
532wd*		at atabus? drive ?	#  + drives
533atapibus*	at atabus?		# ATAPI bus
534cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
535sd*		at atapibus? drive ?	# ATAPI disk drives
536
537pccard0		at mainbus0
538pcmcia*		at pccard0
539com*		at pcmcia? function ?		# Modems and serial cards
540pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
541aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
542wdc*		at pcmcia? function ?
543awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
544ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
545mbe*		at pcmcia? function ?		# MB8696x based Ethernet
546ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
547sm*		at pcmcia? function ?		# Megahertz Ethernet
548mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
549com*		at mhzc?
550sm*		at mhzc?
551
552')m4_dnl
553
554m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl
555drsc0		at mainbus0		# DraCo scsi
556scsibus*	at drsc0
557')m4_dnl
558
559
560# each hard drive from low target to high
561# will configure to the next available sd unit number
562sd*	at scsibus? target ? lun ?	# scsi disks
563st*	at scsibus? target ? lun ?	# scsi tapes
564cd*	at scsibus? target ? lun ?	# scsi cds
565ch*	at scsibus? target ? lun ?	# scsi autochangers
566m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
567ss*	at scsibus? target ? lun ?	# scsi scanner
568uk*	at scsibus? target ? lun ?	# scsi unknown
569')m4_dnl
570m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
571
572# PCI bus support
573options		PCIVERBOSE              # verbose PCI device autoconfig messages
574#options	PCI_CONFIG_DUMP
575options		PCI_NETBSD_CONFIGURE	# supported by mppb(4), p5pb(4), empb(4)
576
577p5pb0		at p5bus0		# Phase5 PCI bridge (CVPPC/BVPPC/G-REX)
578p5membar*	at zbus0		# Phase5 PCI bridge autoconfiguring BARs
579#options	P5PB_DEBUG		# enable excessive debug for p5pb
580#options	P5PB_CONSOLE		# console on CVPPC/BVPPC/Voodoo3
581pci*		at p5pb0
582
583mppb*           at zbus0		# Matay Prometheus Zorro-PCI bridge
584pci*            at mppb?
585
586empb0		at zbus0		# ELBOX Mediator PCI 1200
587emmem0		at zbus0		# ELBOX Mediator PCI memory space
588empm0		at empb0		# ELBOX Mediator PCI Power Management
589pci*		at empb0
590
591#cv3dpb*	at zbus0		# CyberVision 64/3D PCI bridge
592
593#genfb*		at pci?			# generic fb, CVPPC/BVPPC only
594#voodoofb*	at pci?			# 3Dfx Voodoo 3 in G-REX
595#radeonfb*	at pci?			# untested
596
597ne*             at pci?			# NE2000 Ethernet
598satalink* at pci? dev ? function ? flags 0x0002	# SiI SATALink 3112 
599
600# Bluetooth Controller and Device support
601# tested only with btuart on an A1200
602
603# Bluetooth PCMCIA Controllers
604bt3c*   at pcmcia? function ?           # 3Com 3CRWB6096-A
605btbc*   at pcmcia? function ?           # AnyCom BlueCard LSE041/039/139
606
607# Bluetooth Device Hub
608bthub*  at bcsp?
609bthub*  at bt3c?
610bthub*  at btbc?
611bthub*  at btuart?
612
613# Bluetooth HID support
614bthidev* at bthub?
615
616# Bluetooth Mouse
617#btms*   at bthidev? reportid ?
618#wsmouse* at btms? mux 0
619
620# Bluetooth Keyboard
621#btkbd* at bthidev? reportid ?
622#wskbd* at btkbd? console ? mux 1
623
624# Bluetooth Apple Magic Mouse
625#btmagic* at bthub?
626#wsmouse* at btmagic? mux 0
627
628# Bluetooth Audio support
629#btsco* at bthub?
630
631')m4_dnl
632m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
633#
634# accept filters
635pseudo-device	accf_data		# "dataready" accept filter
636pseudo-device	accf_http		# "httpready" accept filter
637')m4_dnl
638
639pseudo-device	loop			# loopback network interface
640pseudo-device	sl			# SLIP network interfaces
641pseudo-device	ppp			# PPP network interfaces
642pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
643pseudo-device	tun			# network tunnel line discipline
644pseudo-device	tap			# virtual Ethernet
645#pseudo-device	gre			# generic L3 over IP tunnel
646pseudo-device	bpfilter		# Berkeley packet filter
647#pseudo-device	carp			# Common Address Redundancy Protocol
648pseudo-device	ipfilter		# IP Filter package
649pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
650#pseudo-device	faith			# IPv[46] tcp relay translation i/f
651pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
652pseudo-device	vlan			# IEEE 802.1q encapsulation
653pseudo-device	bridge			# simple inter-network bridging
654#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
655pseudo-device	agr			# IEEE 802.3ad link aggregation
656#pseudo-device	pf			# PF packet filter
657#pseudo-device	pflog			# PF log if
658m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl
659#pseudo-device	fss			# file system snapshot device
660', `m4_dnl
661pseudo-device	fss			# file system snapshot device
662')m4_dnl
663m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl
664#pseudo-device	putter			# for puffs and pud
665', `m4_dnl
666pseudo-device	putter			# for puffs and pud
667')m4_dnl
668
669pseudo-device	view		4	# views (needed for grfcc)
670m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl
671pseudo-device	pty		2	# pseudo-terminals
672', `m4_dnl
673pseudo-device	pty			# pseudo-terminals
674')m4_dnl
675pseudo-device	clockctl		# user control of clock subsystem
676
677#pseudo-device	wsfont			# wsfont(4) dynamic font loading support
678#pseudo-device	wsmux			# mouse & keyboard multiplexor
679
680pseudo-device	vnd			# vnode pseudo-disks
681#options 	VND_COMPRESSION		# compressed vnd(4)
682pseudo-device	ccd		4	# concatenated disk devices
683#pseudo-device	cgd		4	# cryptographic disk devices
684pseudo-device	raid		8	# RAIDframe disk driver
685options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
686# Options to enable various other RAIDframe RAID types.
687# options 	RF_INCLUDE_EVENODD=1
688# options 	RF_INCLUDE_RAID5_RS=1
689# options 	RF_INCLUDE_PARITYLOGGING=1
690# options 	RF_INCLUDE_CHAINDECLUSTER=1
691# options 	RF_INCLUDE_INTERDECLUSTER=1
692# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
693# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
694
695#options 	RND_COM			# use "com" randomness as well (BROKEN)
696
697m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl
698pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
699pseudo-device	nsmb			# experimental - SMB requester
700')m4_dnl
701m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl
702pseudo-device   bcsp                    # BlueCore Serial Protocol
703pseudo-device   btuart                  # Bluetooth HCI UART (H4)
704')m4_dnl
705
706# Veriexec
707#
708# a pseudo device needed for veriexec
709#pseudo-device	veriexec		1
710#
711# Uncomment the fingerprint methods below that are desired. Note that
712# removing fingerprint methods will have almost no impact on the kernel
713# code size.
714#
715#options VERIFIED_EXEC_FP_RMD160
716#options VERIFIED_EXEC_FP_SHA256
717#options VERIFIED_EXEC_FP_SHA384
718#options VERIFIED_EXEC_FP_SHA512
719#options VERIFIED_EXEC_FP_SHA1
720#options VERIFIED_EXEC_FP_MD5
721
722config	netbsd root on ? type ?
723