Searched +hist:8 +hist:b48463f (Results 51 - 75 of 75) sorted by relevance
/linux-master/drivers/ata/ | ||
H A D | libata-acpi.c | diff f0a6d77b Tue Jun 14 13:51:47 MDT 2022 Sergey Shtylyov <s.shtylyov@omp.ru> ata: make transfer mode masks *unsigned int* The packed transfer mode masks and also the {pio|mwdma|udma}_mask fields of *struct*s ata_device and ata_port_info are declared as *unsigned long* (which is a 64-bit type on 64-bit architectures) but actually the packed masks occupy only 20 bits (7 PIO modes, 5 MWDMA modes, and 8 UDMA modes) and the PIO/MWDMA/UDMA masks easily fit into just 8 bits each, so we can safely use (always 32-bit) *unsigned int* variables instead. This saves 745 bytes of object code in libata-core.o alone, not to mention LLDDs... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> diff f0a6d77b Tue Jun 14 13:51:47 MDT 2022 Sergey Shtylyov <s.shtylyov@omp.ru> ata: make transfer mode masks *unsigned int* The packed transfer mode masks and also the {pio|mwdma|udma}_mask fields of *struct*s ata_device and ata_port_info are declared as *unsigned long* (which is a 64-bit type on 64-bit architectures) but actually the packed masks occupy only 20 bits (7 PIO modes, 5 MWDMA modes, and 8 UDMA modes) and the PIO/MWDMA/UDMA masks easily fit into just 8 bits each, so we can safely use (always 32-bit) *unsigned int* variables instead. This saves 745 bytes of object code in libata-core.o alone, not to mention LLDDs... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8ad928d5 Tue Jul 30 06:36:20 MDT 2013 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI / PM: Use ACPI_STATE_D3_COLD instead of ACPI_STATE_D3 everywhere There are several places in the tree where ACPI_STATE_D3 is used instead of ACPI_STATE_D3_COLD which should be used instead for clarity. Modify them all to use ACPI_STATE_D3_COLD as appropriate. [The definition of ACPI_STATE_D3 itself cannot go away at this point as it is part of ACPICA.] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> diff a9a79dfe Fri Apr 15 16:51:59 MDT 2011 Joe Perches <joe@perches.com> ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> Saves text by removing nearly duplicated text format strings by creating ata_<foo>_printk functions and printf extension %pV. ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB) Format string duplication comes from: #define ata_link_printk(link, lv, fmt, args...) do { \ if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \ printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \ (link)->pmp , ##args); \ else \ printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \ } while(0) Coalesce long formats. $ size drivers/ata/built-in.* text data bss dec hex filename 544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o 558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o 141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o 149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
/linux-master/drivers/acpi/ | ||
H A D | button.c | diff 4fd55566 Fri Apr 28 16:38:41 MDT 2023 Hans de Goede <hdegoede@redhat.com> ACPI: button: Add lid disable DMI quirk for Nextbook Ares 8A The LID0 device on the Nextbook Ares 8A tablet always reports lid closed causing userspace to suspend the device as soon as booting is complete. Add a DMI quirk to disable the broken lid functionality. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 4fd55566 Fri Apr 28 16:38:41 MDT 2023 Hans de Goede <hdegoede@redhat.com> ACPI: button: Add lid disable DMI quirk for Nextbook Ares 8A The LID0 device on the Nextbook Ares 8A tablet always reports lid closed causing userspace to suspend the device as soon as booting is complete. Add a DMI quirk to disable the broken lid functionality. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 2de9fd17 Wed Feb 12 20:19:07 MST 2014 Shuah Khan <shuah@kernel.org> ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined The ACPI button driver defines acpi_button_resume() when CONFIG_PM_SLEEP is defined. This results in the following compile error when CONFIG_PM_SLEEP is undefined: drivers/acpi/button.c:85:8: error: ‘acpi_button_resume’ undeclared here (not in a function) Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8eaa29f9 Thu Dec 12 03:08:17 MST 2013 Lan Tianyu <tianyu.lan@intel.com> ACPI / Button: Fix enabling button GPEs twice Button GPEs have been enabled in the acpi_wake_device_init() during boot and the button driver enables them for the second time. Consequently, it is necessary to do # echo disable > /sys/firmware/acpi/interrupts/gpeXXX twice in a row to disable those GPEs via sysfs. This patch is to remove the GPE enabling code from the button driver to avoid the problem. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
H A D | processor_core.c | diff 8b7809e2 Sun May 14 23:49:14 MDT 2023 Sunil V L <sunilvl@ventanamicro.com> ACPI: processor_core: RISC-V: Enable mapping processor to the hartid processor_core needs arch-specific functions to map the ACPI ID to the physical ID. In RISC-V platforms, hartid is the physical id and RINTC structure in MADT provides this mapping. Add arch-specific function to get this mapping from RINTC. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230515054928.2079268-8-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> diff 8b7809e2 Sun May 14 23:49:14 MDT 2023 Sunil V L <sunilvl@ventanamicro.com> ACPI: processor_core: RISC-V: Enable mapping processor to the hartid processor_core needs arch-specific functions to map the ACPI ID to the physical ID. In RISC-V platforms, hartid is the physical id and RINTC structure in MADT provides this mapping. Add arch-specific function to get this mapping from RINTC. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230515054928.2079268-8-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> diff 09c3f2bd Fri Mar 03 01:02:24 MST 2017 Dou Liyang <douly.fnst@cn.fujitsu.com> Revert"x86/acpi: Enable MADT APIs to return disabled apicids" Revert: 8ad893faf2ea ("x86/acpi: Enable MADT APIs to return disabled apicids") Remove the leftovers of the boot time 'cpuid <-> nodeid' mapping approach. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-3-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> diff fd74da21 Thu Aug 25 02:35:20 MDT 2016 Dou Liyang <douly.fnst@cn.fujitsu.com> acpi: Validate processor id when mapping the processor When we want to identify whether the proc_id is unreasonable or not, we can call the "acpi_processor_validate_proc_id" function. It will search in the duplicate IDs. If we find the proc_id in the IDs, we return true to the call function. Conversely, the false represents available. When we establish all possible cpuid <-> nodeid mapping to handle the cpu hotplugs, we will use the proc_id from ACPI table. We do validation when we get the proc_id. If the result is true, we will stop the mapping. [ tglx: Mark the new function __init ] Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-8-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> diff 8ad893fa Thu Aug 25 02:35:17 MDT 2016 Gu Zheng <guz.fnst@cn.fujitsu.com> x86/acpi: Enable MADT APIs to return disabled apicids The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that, when node online/offline happens, cache based on cpuid <-> nodeid mapping such as wq_numa_possible_cpumask will not cause any problem. It contains 4 steps: 1. Enable apic registeration flow to handle both enabled and disabled cpus. 2. Introduce a new array storing all possible cpuid <-> apicid mapping. 3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid. 4. Establish all possible cpuid <-> nodeid mapping. This patch finishes step 3. There are four mappings in the kernel: 1. nodeid (logical node id) <-> pxm (persistent) 2. apicid (physical cpu id) <-> nodeid (persistent) 3. cpuid (logical cpu id) <-> apicid (not persistent, now persistent by step 2) 4. cpuid (logical cpu id) <-> nodeid (not persistent) So, in order to setup persistent cpuid <-> nodeid mapping for all possible CPUs, we should: 1. Setup cpuid <-> apicid mapping for all possible CPUs, which has been done in step 1, 2. 2. Setup cpuid <-> nodeid mapping for all possible CPUs. But before that, we should obtain all apicids from MADT. All processors' apicids can be obtained by _MAT method or from MADT in ACPI. The current code ignores disabled processors and returns -ENODEV. After this patch, a new parameter will be added to MADT APIs so that caller is able to control if disabled processors are ignored. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-5-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> diff ecf5636d Wed Feb 04 22:44:48 MST 2015 Yinghai Lu <yinghai@kernel.org> ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug We need to parse APIC ID for IOAPIC registration for IOAPIC hotplug. ACPI _MAT method and MADT table are used to figure out IOAPIC ID, just like parsing CPU APIC ID for CPU hotplug. [ tglx: Fixed docbook comment ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff ecf5636d Wed Feb 04 22:44:48 MST 2015 Yinghai Lu <yinghai@kernel.org> ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug We need to parse APIC ID for IOAPIC registration for IOAPIC hotplug. ACPI _MAT method and MADT table are used to figure out IOAPIC ID, just like parsing CPU APIC ID for CPU hotplug. [ tglx: Fixed docbook comment ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 13ca62b2 Sun Oct 26 23:21:36 MDT 2014 Jiang Liu <jiang.liu@linux.intel.com> ACPI: Fix minor syntax issues in processor_core.c Fix minor syntax issues in processor_core.c to follow coding styles. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-7-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
H A D | processor_perflib.c | diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
H A D | pci_root.c | diff 6bc779ee Tue Aug 24 06:20:54 MDT 2021 Joerg Roedel <jroedel@suse.de> PCI/ACPI: Check for _OSC support in acpi_pci_osc_control_set() Get rid of acpi_pci_osc_support() and check for _OSC supported features directly in acpi_pci_osc_control_set(). There is no point in doing an unconditional _OSC query with control=0 even when the kernel later wants to take control over more features. This saves one _OSC query and simplifies the code by getting rid of the acpi_pci_osc_support() function. As a side effect, the !control checks in acpi_pci_query_osc() can also be removed. Link: https://lore.kernel.org/r/20210824122054.29481-5-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> diff 87f1f87a Tue Aug 24 06:20:53 MDT 2021 Joerg Roedel <jroedel@suse.de> PCI/ACPI: Move _OSC query checks to separate function Move the checks about whether the _OSC controls are requested from the firmware to a separate function. Link: https://lore.kernel.org/r/20210824122054.29481-4-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> diff 4c6f6060 Tue Aug 24 06:20:52 MDT 2021 Joerg Roedel <jroedel@suse.de> PCI/ACPI: Move supported and control calculations to separate functions Move the calculations of supported and controlled _OSC features out of negotiate_os_control() into separate functions. Link: https://lore.kernel.org/r/20210824122054.29481-3-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> diff af9d8262 Tue Aug 24 06:20:51 MDT 2021 Joerg Roedel <jroedel@suse.de> PCI/ACPI: Remove OSC_PCI_SUPPORT_MASKS and OSC_PCI_CONTROL_MASKS These masks are only used internally in the PCI Host Bridge _OSC negotiation code, which already makes sure nothing outside of these masks is set. Remove the masks and simplify the code. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20210824122054.29481-2-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> diff 8e8883ce Mon Sep 21 20:32:25 MDT 2020 Tian Tao <tiantao6@hisilicon.com> ACPI: PCI: update kernel-doc line comments Update kernel-doc line comments to fix warnings reported by make W=1: drivers/acpi/pci_root.c:71: warning: Function parameter or member 'handle' not described in 'acpi_is_root_bridge' Signed-off-by: Tian Tao <tiantao6@hisilicon.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff c183619b Wed Feb 04 22:44:49 MST 2015 Jiang Liu <jiang.liu@linux.intel.com> x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug Enable support of IOAPIC hotplug by: 1) reintroducing ACPI based IOAPIC driver 2) enhance pci_root driver to hook hotplug events The ACPI IOAPIC driver is always enabled if all of ACPI, PCI and IOAPIC are enabled. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-19-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff b8178f13 Mon Apr 01 15:47:39 MDT 2013 Bjorn Helgaas <bhelgaas@google.com> Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" This reverts commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6. Conflicts: drivers/acpi/pci_root.c This commit broke some pre-1.1 PCIe devices by leaving them with ASPM enabled. Previously, we had disabled ASPM on these devices because many of them don't implement it correctly (per 149e1637). Requesting _OSC control early means that aspm_disabled may be set before we scan the PCI bus and configure link ASPM state. But the ASPM configuration currently skips the check for pre-PCIe 1.1 devices when aspm_disabled is set, like this: acpi_pci_root_add acpi_pci_osc_support if (flags != base_flags) pcie_no_aspm aspm_disabled = 1 pci_acpi_scan_root ... pcie_aspm_init_link_state pcie_aspm_sanity_check if (!aspm_disabled) /* check for pre-PCIe 1.1 device */ Therefore, setting aspm_disabled early means that we leave ASPM enabled on these pre-PCIe 1.1 devices, which is a regression for some devices. The best fix would be to clean up the ASPM init so we can evaluate _OSC before scanning the bug (that way boot-time and hot-add discovery will work the same), but that requires significant rework. For now, we'll just revert the _OSC change as the lowest-risk fix. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=55211 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.8+ diff b8178f13 Mon Apr 01 15:47:39 MDT 2013 Bjorn Helgaas <bhelgaas@google.com> Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" This reverts commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6. Conflicts: drivers/acpi/pci_root.c This commit broke some pre-1.1 PCIe devices by leaving them with ASPM enabled. Previously, we had disabled ASPM on these devices because many of them don't implement it correctly (per 149e1637). Requesting _OSC control early means that aspm_disabled may be set before we scan the PCI bus and configure link ASPM state. But the ASPM configuration currently skips the check for pre-PCIe 1.1 devices when aspm_disabled is set, like this: acpi_pci_root_add acpi_pci_osc_support if (flags != base_flags) pcie_no_aspm aspm_disabled = 1 pci_acpi_scan_root ... pcie_aspm_init_link_state pcie_aspm_sanity_check if (!aspm_disabled) /* check for pre-PCIe 1.1 device */ Therefore, setting aspm_disabled early means that we leave ASPM enabled on these pre-PCIe 1.1 devices, which is a regression for some devices. The best fix would be to clean up the ASPM init so we can evaluate _OSC before scanning the bug (that way boot-time and hot-add discovery will work the same), but that requires significant rework. For now, we'll just revert the _OSC change as the lowest-risk fix. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=55211 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.8+ |
H A D | thermal.c | diff 8a4ff545 Sun Mar 31 02:37:06 MDT 2024 Stephen Horvath <s.horvath@outlook.com.au> ACPI: thermal: Register thermal zones without valid trip points Some laptops where the thermal control is handled by the EC may provide trip points that fail the kernels new validation, but still have working temperature sensors. An example of this is the Framework 13 AMD. This patch allows the thermal zone to still be registered without trip points if the trip points fail validation, allowing the temperature sensor to be viewed and used by the user. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218586 Fixes: 9c8647224e9f ("ACPI: thermal: Use library functions to obtain trip point temperature values") Signed-off-by: Stephen Horvath <s.horvath@outlook.com.au> [ rjw: Subject edits, remove redundant braces ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 5f641174 Tue Jul 11 23:24:59 MDT 2023 Mario Limonciello <mario.limonciello@amd.com> ACPI: thermal: Drop nocrt parameter The `nocrt` module parameter has no code associated with it and does nothing. As `crt=-1` has same functionality as what nocrt should be doing drop `nocrt` and associated documentation. This should fix a quirk for Gigabyte GA-7ZX that used `nocrt` and thus didn't function properly. Fixes: 8c99fdce3078 ("ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 7f4957be Mon Jun 29 06:29:21 MDT 2020 Andrzej Pietrasiewicz <andrzej.p@collabora.com> thermal: Use mode helpers in drivers Use thermal_zone_device_{en|dis}able() and thermal_zone_device_is_enabled(). Consequently, all set_mode() implementations in drivers: - can stop modifying tzd's "mode" member, - shall stop taking tzd's lock, as it is taken in the helpers - shall stop calling thermal_zone_device_update() as it is called in the helpers - can assume they are called when the mode truly changes, so checks to verify that can be dropped Not providing set_mode() by a driver no longer prevents the core from being able to set tzd's mode, so the relevant check in mode_store() is removed. Other comments: - acpi/thermal.c: tz->thermal_zone->mode will be updated only after we return from set_mode(), so use function parameter in thermal_set_mode() instead, no need to call acpi_thermal_check() in set_mode() - thermal/imx_thermal.c: regmap writes and mode assignment are done in thermal_zone_device_{en|dis}able() and set_mode() callback - thermal/intel/intel_quark_dts_thermal.c: soc_dts_{en|dis}able() are a part of set_mode() callback, so they don't need to modify tzd->mode, and don't need to fall back to the opposite mode if unsuccessful, as the return value will be propagated to thermal_zone_device_{en|dis}able() and ultimately tzd's member will not be changed in thermal_zone_device_set_mode(). - thermal/of-thermal.c: no need to set zone->mode to DISABLED in of_parse_thermal_zones() as a tzd is kzalloc'ed so mode is DISABLED anyway Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-8-andrzej.p@collabora.com diff fae9e2a4 Wed Feb 12 20:19:10 MST 2014 Shuah Khan <shuah@kernel.org> ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined The ACPI thermal driver defines acpi_thermal_resume() when CONFIG_PM_SLEEP is defined. This results in the following compile error when CONFIG_PM_SLEEP is undefined. CC drivers/acpi/thermal.o drivers/acpi/thermal.c:107:8: error: ‘acpi_thermal_resume’ undeclared here (not in a function) make[2]: *** [drivers/acpi/thermal.o] Error 1 Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8a6036b9 Wed Aug 14 07:00:37 MDT 2013 Lan Tianyu <tianyu.lan@intel.com> ACPI / thermal: Remove the unused lock of struct acpi_thermal The acpi_thermal->lock now just is initialized when a thermal zone device is added and destroyed when the thermal zone is removed. It is never used in any other places, so remove it. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8eaa8d6c Tue Jul 24 20:11:00 MDT 2012 Zhang Rui <rui.zhang@intel.com> Thermal: Documentation update With commit 6503e5df08008b9a47022b5e9ebba658c8fa69af, the value of /sys/class/thermal/thermal_zoneX/mode has been changed from user/kernel to enabled/disabled. Update the documentation so that users won't be confused. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> diff 8b7ef6d8 Tue Feb 16 14:55:51 MST 2010 Thomas Renninger <trenn@suse.de> ACPI thermal: Check for thermal zone requirement ACPI spec says (11.5 Thermal Zone Interface Requirements): A thermal zone must contain at least one trip point (critical, near critical, active, or passive) Check this once at init time. Signed-off-by: Thomas Renninger <trenn@suse.de> Tested-by: clarkt@cnsp.com Signed-off-by: Len Brown <len.brown@intel.com> |
H A D | battery.c | diff 8c3f6993 Sun Feb 23 07:29:41 MST 2020 Hans de Goede <hdegoede@redhat.com> ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry The Lenovo Ideapad Miix 320 bat_dmi_table entry is using weird indentation and is the only entry which (unnecessarily) uses DMI_EXACT_MATCH instead of DMI_MATCH, fixup both to make the entry consistent with the others. While at it also update the comments for battery_do_not_check_pmic_quirk entries, adding a bit of text explaining why the quirk is necessary. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 933ca4e3 Thu Oct 17 21:18:25 MDT 2019 Kefeng Wang <wangkefeng.wang@huawei.com> acpi: Use pr_warn instead of pr_warning As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent <prefix>_warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-8-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: James Morse <james.morse@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek@suse.com: two more indentation fixes] Signed-off-by: Petr Mladek <pmladek@suse.com> diff 7f6895c6 Wed Feb 12 20:19:06 MST 2014 Shuah Khan <shuah@kernel.org> ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined The ACPI battery driver defines acpi_battery_resume() when CONFIG_PM_SLEEP is defined. This results in the following compile error when CONFIG_PM_SLEEP is undefined: drivers/acpi/battery.c:847:8: error: ‘acpi_battery_resume’ undeclared here (not in a function) Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 4000e626 Fri Nov 16 14:28:58 MST 2012 Kamil Iskra <kamil@iskra.name> ACPI / battery: Correct battery capacity values on Thinkpads Add a quirk to correctly report battery capacity on 2010 and 2011 Lenovo Thinkpad models. The affected models that I tested (x201, t410, t410s, and x220) exhibit a problem where, when battery capacity reporting unit is mAh, the values being reported are wrong. Pre-2010 and 2012 models appear to always report in mWh and are thus unaffected. Also, in mid-2012 Lenovo issued a BIOS update for the 2011 models that fixes the issue (tested on x220 with a post-1.29 BIOS). No such update is available for the 2010 models, so those still need this patch. Problem description: for some reason, the affected Thinkpads switch the reporting unit between mAh and mWh; generally, mAh is used when a laptop is plugged in and mWh when it's unplugged, although a suspend/resume or rmmod/modprobe is needed for the switch to take effect. The values reported in mAh are *always* wrong. This does not appear to be a kernel regression; I believe that the values were never reported correctly. I tested back to kernel 2.6.34, with multiple machines and BIOS versions. Simply plugging a laptop into mains before turning it on is enough to reproduce the problem. Here's a sample /proc/acpi/battery/BAT0/info from Thinkpad x220 (before a BIOS update) with a 4-cell battery: present: yes design capacity: 2886 mAh last full capacity: 2909 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 145 mAh design capacity low: 13 mAh cycle count: 0 capacity granularity 1: 1 mAh capacity granularity 2: 1 mAh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Once the laptop switches the unit to mWh (unplug from mains, suspend, resume), the output changes to: present: yes design capacity: 28860 mWh last full capacity: 29090 mWh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 1454 mWh design capacity low: 200 mWh cycle count: 0 capacity granularity 1: 1 mWh capacity granularity 2: 1 mWh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Can you see how the values for "design capacity", etc., differ by a factor of 10 instead of 14.8 (the design voltage of this battery)? On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the values reported in mWh are correct and the ones in mAh are not. My guess is that this problem has been around ever since those machines were released, but because the most common Thinkpad batteries are rated at 10.8V, the error (8%) is small enough that it simply hasn't been noticed or at least nobody could be bothered to look into it. My patch works around the problem by adjusting the incorrectly reported mAh values by "10000 / design_voltage". The patch also has code to figure out if it should be activated or not. It only activates on Lenovo Thinkpads, only when the unit is mAh, and, as an extra precaution, only when the battery capacity reported through ACPI does not match what is reported through DMI (I've never encountered a machine where the first two conditions would be true but the last would not, but better safe than sorry). I've been using this patch for close to a year on several systems without any problems. References: https://bugzilla.kernel.org/show_bug.cgi?id=41062 Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 69d94ec6 Fri Aug 05 16:34:08 MDT 2011 Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Battery: sysfs_remove_battery(): possible circular locking Commit 9c921c22a7f33397a6774d7fa076db9b6a0fd669 Author: Lan Tianyu <tianyu.lan@intel.com> ACPI / Battery: Resolve the race condition in the sysfs_remove_battery() fixed BUG https://bugzilla.kernel.org/show_bug.cgi?id=35642 , but as a side effect made lockdep unhappy with sysfs_remove_battery(): [14818.477168] [14818.477170] ======================================================= [14818.477200] [ INFO: possible circular locking dependency detected ] [14818.477221] 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.477236] ------------------------------------------------------- [14818.477257] s2ram/1599 is trying to acquire lock: [14818.477276] (s_active#8){++++.+}, at: [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.477323] [14818.477325] but task is already holding lock: [14818.477350] (&battery->lock){+.+.+.}, at: [<ffffffffa0047278>] sysfs_remove_battery+0x10/0x4b [battery] [14818.477395] [14818.477397] which lock already depends on the new lock. [14818.477399] [..] [14818.479121] stack backtrace: [14818.479148] Pid: 1599, comm: s2ram Not tainted 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.479175] Call Trace: [14818.479198] [<ffffffff814828c3>] print_circular_bug+0x293/0x2a4 [14818.479228] [<ffffffff81070cb5>] __lock_acquire+0xfe4/0x164b [14818.479260] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479288] [<ffffffff810718d2>] lock_acquire+0x138/0x1ac [14818.479316] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479345] [<ffffffff81168a79>] sysfs_deactivate+0x9b/0xec [14818.479373] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479405] [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.479433] [<ffffffff81167bc5>] sysfs_hash_and_remove+0x54/0x77 [14818.479461] [<ffffffff811681b9>] sysfs_remove_file+0x12/0x14 [14818.479488] [<ffffffff81385bf8>] device_remove_file+0x12/0x14 [14818.479516] [<ffffffff81386504>] device_del+0x119/0x17c [14818.479542] [<ffffffff81386575>] device_unregister+0xe/0x1a [14818.479570] [<ffffffff813c6ef9>] power_supply_unregister+0x23/0x27 [14818.479601] [<ffffffffa004729c>] sysfs_remove_battery+0x34/0x4b [battery] [14818.479632] [<ffffffffa004778f>] battery_notify+0x2c/0x3a [battery] [14818.479662] [<ffffffff8148fe82>] notifier_call_chain+0x74/0xa1 [14818.479692] [<ffffffff810624b4>] __blocking_notifier_call_chain+0x6c/0x89 [14818.479722] [<ffffffff810624e0>] blocking_notifier_call_chain+0xf/0x11 [14818.479751] [<ffffffff8107e40e>] pm_notifier_call_chain+0x15/0x27 [14818.479770] [<ffffffff8107ee1a>] enter_state+0xa7/0xd5 [14818.479782] [<ffffffff8107e341>] state_store+0xaa/0xc0 [14818.479795] [<ffffffff8107e297>] ? pm_async_store+0x45/0x45 [14818.479807] [<ffffffff81248837>] kobj_attr_store+0x17/0x19 [14818.479820] [<ffffffff81167e27>] sysfs_write_file+0x103/0x13f [14818.479834] [<ffffffff81109037>] vfs_write+0xad/0x13d [14818.479847] [<ffffffff811092b2>] sys_write+0x45/0x6c [14818.479860] [<ffffffff81492f92>] system_call_fastpath+0x16/0x1b This patch introduces separate lock to struct acpi_battery to grab in sysfs_remove_battery() instead of battery->lock. So fix by Lan Tianyu is still there, we just grab independent lock. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
H A D | sleep.c | diff 8c53b318 Tue Nov 26 09:54:16 MST 2019 Sean Christopherson <seanjc@google.com> ACPI/sleep: Convert acpi_wakeup_address into a function Convert acpi_wakeup_address from a raw variable into a function so that x86 can wrap its dereference of the real mode boot header in a function instead of broadcasting it to the world via a #define. This sets the stage for a future patch to move x86's definition of the new function, acpi_get_wakeup_address(), out of asm/acpi.h and thus break acpi.h's dependency on asm/realmode.h. No functional change intended. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Link: https://lkml.kernel.org/r/20191126165417.22423-12-sean.j.christopherson@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> diff 8ece1d83 Sun Apr 30 14:54:16 MDT 2017 Hans de Goede <hdegoede@redhat.com> ACPI / power: Delay turning off unused power resources after suspend Commit 660b1113e0f3 (ACPI / PM: Fix consistency check for power resources during resume) introduced a check for ACPI power resources which have been turned on by the BIOS during suspend and turns these back off again. This is causing problems on a Dell Venue Pro 11 7130 (i5-4300Y) it causes the following messages to show up in dmesg: [ 131.014605] ACPI: Waking up from system sleep state S3 [ 131.150271] acpi LNXPOWER:07: Turning OFF [ 131.150323] acpi LNXPOWER:06: Turning OFF [ 131.150911] acpi LNXPOWER:00: Turning OFF [ 131.169014] ACPI : EC: interrupt unblocked [ 131.181811] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 133.535728] pci_raw_set_power_state: 76 callbacks suppressed [ 133.535735] iwlwifi 0000:01:00.0: Refused to change power state, currently in D3 [ 133.597672] PM: noirq resume of devices complete after 2428.891 msecs Followed by a bunch of iwlwifi errors later on and the pcie device dropping from the bus (acpiphp thinks it has been unplugged). Disabling the turning off of unused power resources fixes this. Instead of adding a quirk for this system, this commit fixes this by moving the disabling of unused power resources to later in the resume sequence when the iwlwifi card has been moved out of D3 so the ref_count for its power resource no longer is 0. This new behavior seems to match the intend of the original commit which commit-msg says: "(... which means that no devices are going to need them any time soon) and we should turn them off". This also avoids power resources which we need when bringing devices out of D3 from getting bounced off and then back on again. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8c01275e Sat Oct 24 11:02:46 MDT 2015 Chen Yu <yu.c.chen@intel.com> ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle For an ACPI compatible system, the SCI (ACPI System Control Interrupt) is used to wake the system up from suspend-to-idle. Once the CPU is woken up by the SCI, the interrupt handler will first check if the current IRQ has been configured for system wakeup, so irq_pm_check_wakeup() is invoked to validate the IRQ number. However, during suspend-to-idle, enable_irq_wake() is called for acpi_gbl_FADT.sci_interrupt, although the IRQ number that the SCI handler has been installed for should be passed to it instead. Thus, if acpi_gbl_FADT.sci_interrupt happens to be different from that number, ACPI interrupts will not be able to wake up the system from sleep. Fix this problem by passing the IRQ number returned by acpi_gsi_to_irq() to enable_irq_wake() instead of acpi_gbl_FADT.sci_interrupt. Cc: 3.18+ <stable@vger.kernel.org> # 3.18+ Acked-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b691c9c Fri Jan 23 01:12:06 MST 2015 Jan Beulich <JBeulich@suse.com> ACPI / sleep: mark acpi_sleep_dmi_check() __init This makes a difference if the compiler decides not to inline the function, as then the function's reference to acpisleep_dmi_table[] yields a section mismatch warning. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff a4e90bed Thu Mar 13 15:11:39 MDT 2014 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses the optional sleep control and sleep status registers for making the system enter sleep states (including S5), so it is not possible to use system sleep states or power it off using ACPI if the HW Reduced ACPI mode bit is set and those registers are not available. For this reason, add a new function, acpi_sleep_state_supported(), checking if the HW Reduced ACPI mode bit is set and whether or not system sleep states are usable in that case in addition to checking the return value of acpi_get_sleep_type_data() and make the ACPI sleep setup routines use that function to check the availability of system sleep states. Among other things, this prevents the kernel from attempting to use ACPI for powering off HW Reduced ACPI systems without the sleep control and sleep status registers, because ACPI power off doesn't have a chance to work on them. That allows alternative power off mechanisms that may actually work to be used on those systems. The affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell Desktop SDP and Ivy Bridge EP Demo depot. References: https://bugzilla.kernel.org/show_bug.cgi?id=70931 Reported-by: Adam Williamson <awilliam@redhat.com> Tested-by: Aubrey Li <aubrey.li@linux.intel.com> Cc: 3.4+ <stable@vger.kernel.org> # 3.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 5c551e62 Fri Jan 10 02:51:53 MST 2014 Oliver Neukum <oneukum@suse.de> ACPI / sleep: remove panic in case hardware has changed after S4 Some BIOSes change hardware based on the state of a laptop's lid. If the lid is closed, the touchpad is disabled and the checksum changes. Windows 8 no longer aborts resume if the checksum has changed. Signed-off-by: Oliver Neukum <oneukum@suse.de> [rjw: Use pr_crit() for the message and don't break the string] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b713a88 Tue Oct 23 18:08:38 MDT 2012 Rafael J. Wysocki <rafael.j.wysocki@intel.com> PM / ACPI: Take device PM QoS flags into account Make ACPI power management routines and PCI power management routines depending on ACPI take device PM QoS flags into account when deciding what power state to put the device into. In particular, after this change acpi_pm_device_sleep_state() will not return ACPI_STATE_D3_COLD as the deepest available low-power state if PM_QOS_FLAG_NO_POWER_OFF is requested for the device and it will not require remote wakeup to work for the device in the returned low-power state if there is at least one PM QoS flags request for the device, but PM_QOS_FLAG_REMOTE_WAKEUP is not requested for it. Accordingly, acpi_pci_set_power_state() will refuse to put the device into D3cold if PM_QOS_FLAG_NO_POWER_OFF is requested for it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Huang Ying <ying.huang@intel.com> diff 8a73b17e Tue Mar 20 20:01:49 MDT 2012 Lin Ming <ming.m.lin@intel.com> ACPICA: Sleep/Wake interfaces: optionally execute _GTS and _BFS Enhanced the sleep/wake interfaces to optionally execute the _GTS method (Going To Sleep), and the _BFS method (Back From Sleep). Windows apparently does not execute these methods, and therefore these methods are often untested. It has been seen on some systems where the execution of these methods causes errors and also prevents the machine from entering S5. It is therefore suggested that host operating systems do not execute these methods by default. In the future, perhaps these methods can be optionally executed based on the age of the system and/or what is the newest version of Windows that the BIOS asks for via _OSI. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
H A D | bus.c | diff 8d287e82 Wed Jun 16 08:05:50 MDT 2021 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI: scan: Simplify acpi_table_events_fn() Notice that the table field of struct acpi_table_events_work is never read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so both of them are redundant. Accordingly, drop struct acpi_table_events_work and use struct work_struct directly instead of it, simplify acpi_scan_table_handler() and rename it to acpi_scan_table_notify(). Moreover, make acpi_bus_table_handler() check the event code against ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it is not necessary to do that check in the latter. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff cefc7ca4 Wed Jun 09 21:41:52 MDT 2021 Erik Kaneda <erik.kaneda@intel.com> ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff cefc7ca4 Wed Jun 09 21:41:52 MDT 2021 Erik Kaneda <erik.kaneda@intel.com> ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8e173cbb Wed Jun 02 02:54:25 MDT 2021 Hanjun Guo <guohanjun@huawei.com> ACPI: bus: Use pr_*() macros to replace printk() In commit ee98460b2ff9 ("ACPI: bus: Clean up printing messages"), direct printk() invocations was replaced with the matching pr_*() calls, but the left two printk() calls was merged at the same time with the above cleaup commit, so we missed them for cleanup, let's replace them now and we can remove the use of PREFIX later. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8ff277c5 Fri Feb 09 08:38:34 MST 2018 Andy Shevchenko <andriy.shevchenko@linux.intel.com> ACPI / bus: Remove checks in acpi_get_match_data() As well as its sibling of_device_get_match_data() has no such checks, no need to do it in acpi_get_match_data(). First of all, we are not supposed to call fwnode API like this without driver attached. Second, since __acpi_match_device() does check input parameter there is no need to duplicate it outside. And last but not least one, the API should still serve the cases when ACPI device is enumerated via PRP0001. In such case driver has neither ACPI table nor driver data there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8d3523fb Wed Dec 14 00:04:46 MST 2016 Lv Zheng <lv.zheng@intel.com> ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() Since all users are cleaned up, remove the 2 deprecated APIs due to no users. As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap is renamed to acpi_permanent_mmap to have a consistent coding style across entire Linux ACPI subsystem. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b533a0e Tue Nov 22 01:23:59 MST 2016 Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> acpi/bus: Set _OSC for diverse core support Set the OSC_SB_CPC_DIVERSE_HIGH_SUPPORT (bit 12) to enable diverse core support. This is required to enable the BIOS support of the Intel Turbo Boost Max Technology 3.0 feature. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bp@suse.de Link: http://lkml.kernel.org/r/a023623a727e86040a1715797055f6402caefd7e.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> diff 8cfb0cdf Wed Dec 02 19:43:00 MST 2015 Lv Zheng <lv.zheng@intel.com> ACPI / debugger: Add IO interface to access debugger functionalities This patch adds /sys/kernel/debug/acpi/acpidbg, which can be used by userspace programs to access ACPICA debugger functionalities. Known issue: 1. IO flush support acpi_os_notify_command_complete() and acpi_os_wait_command_ready() can be used by acpi_dbg module to implement .flush() filesystem operation. While this patch doesn't go that far. It then becomes userspace tool's duty now to flush old commands before executing new batch mode commands. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
H A D | processor_idle.c | diff 8ce78470 Thu Jan 12 12:43:29 MST 2023 Peter Zijlstra <peterz@infradead.org> acpi_idle: Remove tracing All the idle routines are called with RCU disabled, as such there must not be any tracing inside. While there; clean-up the io-port idle thing. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.251666856@infradead.org diff fa26d0c77 Tue Apr 06 09:56:40 MDT 2021 Vitaly Kuznetsov <vkuznets@redhat.com> ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m Commit 8cdddd182bd7 ("ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()") tried to fix CPU0 hotplug breakage by copying wakeup_cpu0() + start_cpu0() logic from hlt_play_dead()//mwait_play_dead() into acpi_idle_play_dead(). The problem is that these functions are not exported to modules so when CONFIG_ACPI_PROCESSOR=m build fails. The issue could've been fixed by exporting both wakeup_cpu0()/start_cpu0() (the later from assembly) but it seems putting the whole pattern into a new function and exporting it instead is better. Reported-by: kernel test robot <lkp@intel.com> Fixes: 8cdddd182bd7 ("CPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()") Cc: <stable@vger.kernel.org> # 5.10+ Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff fa26d0c77 Tue Apr 06 09:56:40 MDT 2021 Vitaly Kuznetsov <vkuznets@redhat.com> ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m Commit 8cdddd182bd7 ("ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()") tried to fix CPU0 hotplug breakage by copying wakeup_cpu0() + start_cpu0() logic from hlt_play_dead()//mwait_play_dead() into acpi_idle_play_dead(). The problem is that these functions are not exported to modules so when CONFIG_ACPI_PROCESSOR=m build fails. The issue could've been fixed by exporting both wakeup_cpu0()/start_cpu0() (the later from assembly) but it seems putting the whole pattern into a new function and exporting it instead is better. Reported-by: kernel test robot <lkp@intel.com> Fixes: 8cdddd182bd7 ("CPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()") Cc: <stable@vger.kernel.org> # 5.10+ Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8cdddd18 Wed Mar 24 09:22:19 MDT 2021 Vitaly Kuznetsov <vkuznets@redhat.com> ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead() Commit 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g. I'm observing the following on AWS Nitro (e.g r5b.xlarge but other instance types are affected as well): # echo 0 > /sys/devices/system/cpu/cpu0/online # echo 1 > /sys/devices/system/cpu/cpu0/online <10 seconds delay> -bash: echo: write error: Input/output error In fact, the above mentioned commit only revealed the problem and did not introduce it. On x86, to wakeup CPU an NMI is being used and hlt_play_dead()/mwait_play_dead() loops are prepared to handle it: /* * If NMI wants to wake up CPU0, start CPU0. */ if (wakeup_cpu0()) start_cpu0(); cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on systems where it wasn't called before the above mentioned commit) serves the same purpose but it doesn't have a path for CPU0. What happens now on wakeup is: - NMI is sent to CPU0 - wakeup_cpu0_nmi() works as expected - we get back to while (1) loop in acpi_idle_play_dead() - safe_halt() puts CPU0 to sleep again. The straightforward/minimal fix is add the special handling for CPU0 on x86 and that's what the patch is doing. Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> diff 918aae42 Mon Dec 14 01:10:06 MST 2009 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> ACPI: fix for lapic_timer_propagate_broadcast() I got following warning on ia64 box: In function 'acpi_processor_power_verify': 642: warning: passing argument 2 of 'smp_call_function_single' from incompatible pointer type This smp_call_function_single() was introduced by a commit f833bab87fca5c3ce13778421b1365845843b976: > @@ -162,8 +162,9 @@ > pr->power.timer_broadcast_on_state = state; > } > > -static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) > +static void lapic_timer_propagate_broadcast(void *arg) > { > + struct acpi_processor *pr = (struct acpi_processor *) arg; > unsigned long reason; > > reason = pr->power.timer_broadcast_on_state < INT_MAX ? > @@ -635,7 +636,8 @@ > working++; > } > > - lapic_timer_propagate_broadcast(pr); > + smp_call_function_single(pr->id, lapic_timer_propagate_broadcast, > + pr, 1); > > return (working); > } The problem is that the lapic_timer_propagate_broadcast() has 2 versions: One is real code that modified in the above commit, and the other is NOP code that used when !ARCH_APICTIMER_STOPS_ON_C3: static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { } So I got warning because of !ARCH_APICTIMER_STOPS_ON_C3. We really want to do nothing here on !ARCH_APICTIMER_STOPS_ON_C3, so modify lapic_timer_propagate_broadcast() of real version to use smp_call_function_single() in it. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 918aae42 Mon Dec 14 01:10:06 MST 2009 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> ACPI: fix for lapic_timer_propagate_broadcast() I got following warning on ia64 box: In function 'acpi_processor_power_verify': 642: warning: passing argument 2 of 'smp_call_function_single' from incompatible pointer type This smp_call_function_single() was introduced by a commit f833bab87fca5c3ce13778421b1365845843b976: > @@ -162,8 +162,9 @@ > pr->power.timer_broadcast_on_state = state; > } > > -static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) > +static void lapic_timer_propagate_broadcast(void *arg) > { > + struct acpi_processor *pr = (struct acpi_processor *) arg; > unsigned long reason; > > reason = pr->power.timer_broadcast_on_state < INT_MAX ? > @@ -635,7 +636,8 @@ > working++; > } > > - lapic_timer_propagate_broadcast(pr); > + smp_call_function_single(pr->id, lapic_timer_propagate_broadcast, > + pr, 1); > > return (working); > } The problem is that the lapic_timer_propagate_broadcast() has 2 versions: One is real code that modified in the above commit, and the other is NOP code that used when !ARCH_APICTIMER_STOPS_ON_C3: static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { } So I got warning because of !ARCH_APICTIMER_STOPS_ON_C3. We really want to do nothing here on !ARCH_APICTIMER_STOPS_ON_C3, so modify lapic_timer_propagate_broadcast() of real version to use smp_call_function_single() in it. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 8e92b660 Fri Feb 29 11:24:32 MST 2008 Venki Pallipadi <venkatesh.pallipadi@intel.com> cpuidle: fix 100% C0 statistics regression commit 9b12e18cdc1553de62d931e73443c806347cd974 'ACPI: cpuidle: Support C1 idle time accounting' was implicated in a 100% C0 idle regression. http://bugzilla.kernel.org/show_bug.cgi?id=10076 It pointed out a potential problem where the menu governor may get confused by the C-state residency time from poll idle or C1 idle, where this timing info is not accurate. This inaccuracy is due to interrupts being handled before we account for C-state exit. Do not mark TIME_VALID for CO poll state. Mark C1 time as valid only with the MWAIT (CSTATE_FFH) entry method. This makes governors use the timing information only when it is correct and eliminates any wrong policy decisions that may result from invalid timing information. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
H A D | osl.c | diff 8e57de43 Thu Dec 14 16:25:15 MST 2023 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI: OSL: Use spin locks without disabling interrupts After commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") any ACPICA code never runs in a hardirq handler, so it need not dissable interrupts on the local CPU when acquiring a spin lock. Make it use spin locks without disabling interrupts. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8aef273e Wed Feb 10 11:09:43 MST 2021 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI: OSL: Clean up printing messages Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition to osl.c and replace direct printk() usage in that file with the suitable pr_*() calls. While at it, add a physical address value to the message in acpi_os_map_iomem() and reword a couple of messages to avoid using function names in them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8d3523fb Wed Dec 14 00:04:46 MST 2016 Lv Zheng <lv.zheng@intel.com> ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() Since all users are cleaned up, remove the 2 deprecated APIs due to no users. As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap is renamed to acpi_permanent_mmap to have a consistent coding style across entire Linux ACPI subsystem. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8cfb0cdf Wed Dec 02 19:43:00 MST 2015 Lv Zheng <lv.zheng@intel.com> ACPI / debugger: Add IO interface to access debugger functionalities This patch adds /sys/kernel/debug/acpi/acpidbg, which can be used by userspace programs to access ACPICA debugger functionalities. Known issue: 1. IO flush support acpi_os_notify_command_complete() and acpi_os_wait_command_ready() can be used by acpi_dbg module to implement .flush() filesystem operation. While this patch doesn't go that far. It then becomes userspace tool's duty now to flush old commands before executing new batch mode commands. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8a1664be Fri Jul 18 04:02:52 MDT 2014 Graeme Gregory <graeme.gregory@linaro.org> ACPI: add config for BIOS table scan With the addition of ARM64 that does not have a traditional BIOS to scan, add a config option which is selected on x86 (ia64 doesn't need it either, it is EFI/UEFI based system) to do the traditional BIOS scanning for tables. Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8cdde126 Thu Feb 09 09:36:41 MST 2012 Myron Stowe <mstowe@redhat.com> ACPI: Fix logic for removing mappings in 'acpi_unmap' Make sure the removal of mappings uses the same logic that put the mappings in place. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 8fec62b2 Tue Jun 29 02:07:09 MDT 2010 Tejun Heo <tj@kernel.org> acpi: use queue_work_on() instead of binding workqueue worker to cpu0 ACPI works need to be executed on cpu0 and acpi/osl.c achieves this by creating singlethread workqueue and then binding it to cpu0 from a work which is quite unorthodox. Make it create regular workqueues and use queue_work_on() instead. This is in preparation of concurrency managed workqueue and the extra workers won't be a problem after it's implemented. Signed-off-by: Tejun Heo <tj@kernel.org> diff 49fbabf5 Thu Nov 15 02:01:06 MST 2007 Zhao Yakui <yakui.zhao@intel.com> ACPI: Handle I/O access width requestst that are not a multiple of 8 bits. We've run into BIOS that hand us 4-bit access width requests for T-state control when the code expected only multipls of 8-bits. Round up. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 49fbabf5 Thu Nov 15 02:01:06 MST 2007 Zhao Yakui <yakui.zhao@intel.com> ACPI: Handle I/O access width requestst that are not a multiple of 8 bits. We've run into BIOS that hand us 4-bit access width requests for T-state control when the code expected only multipls of 8-bits. Round up. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
H A D | scan.c | diff 8d437a0b Sat Nov 04 14:58:25 MDT 2023 Hans de Goede <hdegoede@redhat.com> ACPI: scan: Add LNXVIDEO HID to ignore_serial_bus_ids[] The I2C-core already has filtering to skip i2c_client instantiation for LNXVIDEO acpi_device-s with I2cSerialBus resources, since LNXVIDEO devices are not i2c_client-s and are handled by the acpi_video driver. This filtering was added to i2c-core-acpi.c in commit 3a4991a9864c ("i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices"). Now a similar problem has shown up where the SPI-core is instantiating an unwanted SPI-device for a SpiSerialBus resource under a LNXVIDEO acpi_device. On a Lenovo Yoga Tab 3 YT3-X90F this unwanted SPI-device instanstantiation causes the SPI-device instanstantiation for the WM5102 audio codec to fail with: [ 21.988441] pxa2xx-spi 8086228E:00: chipselect 0 already in use Instead of duplicating the I2C-core filtering in the SPI-core code, push the filtering of SerialBus resources under LNXVIDEO acpi_device-s up into the ACPI-core by adding the LNXVIDEO HID to ignore_serial_bus_ids[]. Note the filtering in the I2C-core i2c_acpi_do_lookup() function is still necessary because this not only impacts i2c_client instantiation but it also makes the I2C-core ignore the I2cSerialBus resource when checking what the maximum speed is the I2C bus supports, which is still necessary. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231104205828.63139-1-hdegoede@redhat.com diff 8c6fdbd6 Fri Oct 20 12:47:04 MDT 2023 James Morse <james.morse@arm.com> ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration acpi_scan_device_not_present() is called when a device in the hierarchy is not available for enumeration. Historically enumeration was only based on whether the device was present. To add support for only enumerating devices that are both present and enabled, this helper should be renamed. It was only ever about enumeration, rename it acpi_scan_device_not_enumerated(). No change in behaviour is intended. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Miguel Luis <miguel.luis@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8d287e82 Wed Jun 16 08:05:50 MDT 2021 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI: scan: Simplify acpi_table_events_fn() Notice that the table field of struct acpi_table_events_work is never read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so both of them are redundant. Accordingly, drop struct acpi_table_events_work and use struct work_struct directly instead of it, simplify acpi_scan_table_handler() and rename it to acpi_scan_table_notify(). Moreover, make acpi_bus_table_handler() check the event code against ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it is not necessary to do that check in the latter. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8acf4108 Wed Jun 02 02:54:37 MDT 2021 Hanjun Guo <guohanjun@huawei.com> ACPI: scan: Unify the log message printing The log messages in scan.c is not in consistency, some pr_*() calls have PREFIX, but some don't. Using pr_fmt() and remove PREFIX, also replace printk() with pr_*() macro to unify the message printing. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff a58015d6 Fri Jan 08 00:23:48 MST 2021 Dexuan Cui <decui@microsoft.com> ACPI: scan: Harden acpi_device_add() against device ID overflows Linux VM on Hyper-V crashes with the latest mainline: [ 4.069624] detected buffer overflow in strcpy [ 4.077733] kernel BUG at lib/string.c:1149! .. [ 4.085819] RIP: 0010:fortify_panic+0xf/0x11 ... [ 4.085819] Call Trace: [ 4.085819] acpi_device_add.cold.15+0xf2/0xfb [ 4.085819] acpi_add_single_object+0x2a6/0x690 [ 4.085819] acpi_bus_check_add+0xc6/0x280 [ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa [ 4.085819] acpi_walk_namespace+0x9a/0xc2 [ 4.085819] acpi_bus_scan+0x78/0x90 [ 4.085819] acpi_scan_init+0xfa/0x248 [ 4.085819] acpi_init+0x2c1/0x321 [ 4.085819] do_one_initcall+0x44/0x1d0 [ 4.085819] kernel_init_freeable+0x1ab/0x1f4 This is because of the recent buffer overflow detection in the commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions") Here acpi_device_bus_id->bus_id can only hold 14 characters, while the the acpi_device_hid(device) returns a 22-char string "HYPER_V_GEN_COUNTER_V1". Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8 chars. The field bus_id in struct acpi_device_bus_id was originally defined as char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI devices") Fix the issue by changing the field bus_id to const char *, and use kstrdup_const() to initialize it. Signed-off-by: Dexuan Cui <decui@microsoft.com> Tested-By: Jethro Beekman <jethro@fortanix.com> [ rjw: Subject change, whitespace adjustment ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 01bb86b3 Fri Nov 20 19:02:22 MST 2020 Saravana Kannan <saravanak@google.com> driver core: Add fwnode_init() There are multiple locations in the kernel where a struct fwnode_handle is initialized. Add fwnode_init() so that we have one way of initializing a fwnode_handle. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-8-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff 18b709be Tue Dec 06 07:20:11 MST 2016 Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> diff d760a1ba Mon Nov 21 03:01:39 MST 2016 Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> ACPI: Implement acpi_dma_configure On DT based systems, the of_dma_configure() API implements DMA configuration for a given device. On ACPI systems an API equivalent to of_dma_configure() is missing which implies that it is currently not possible to set-up DMA operations for devices through the ACPI generic kernel layer. This patch fills the gap by introducing acpi_dma_configure/deconfigure() calls that for now are just wrappers around arch_setup_dma_ops() and arch_teardown_dma_ops() and also updates ACPI and PCI core code to use the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions. Since acpi_dma_configure() is used to configure DMA operations, the function initializes the dma/coherent_dma masks to sane default values if the current masks are uninitialized (also to keep the default values consistent with DT systems) to make sure the device has a complete default DMA set-up. The DMA range size passed to arch_setup_dma_ops() is sized according to the device coherent_dma_mask (starting at address 0x0), mirroring the DT probing path behaviour when a dma-ranges property is not provided for the device being probed; this changes the current arch_setup_dma_ops() call parameters in the ACPI probing case, but since arch_setup_dma_ops() is a NOP on all architectures but ARM/ARM64 this patch does not change the current kernel behaviour on them. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [pci] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com> diff 8a0662d9 Tue Nov 04 06:03:59 MST 2014 Rafael J. Wysocki <rafael.j.wysocki@intel.com> Driver core: Unified interface for firmware node properties Add new generic routines are provided for retrieving properties from device description objects in the platform firmware in case there are no struct device objects for them (either those objects have not been created yet or they do not exist at all). The following functions are provided: fwnode_property_present() fwnode_property_read_u8() fwnode_property_read_u16() fwnode_property_read_u32() fwnode_property_read_u64() fwnode_property_read_string() fwnode_property_read_u8_array() fwnode_property_read_u16_array() fwnode_property_read_u32_array() fwnode_property_read_u64_array() fwnode_property_read_string_array() in analogy with the corresponding functions for struct device added previously. For all of them, the first argument is a pointer to struct fwnode_handle (new type) that allows a device description object (depending on what platform firmware interface is in use) to be obtained. Add a new macro device_for_each_child_node() for iterating over the children of the device description object associated with a given device and a new function device_get_child_node_count() returning the number of a given device's child nodes. The interface covers both ACPI and Device Trees. Suggested-by: Grant Likely <grant.likely@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff ffdcd955 Tue Oct 21 05:33:55 MDT 2014 Mika Westerberg <mika.westerberg@linux.intel.com> ACPI: Add support for device specific properties Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff ffdcd955 Tue Oct 21 05:33:55 MDT 2014 Mika Westerberg <mika.westerberg@linux.intel.com> ACPI: Add support for device specific properties Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
H A D | ec.c | diff ad332c8a Fri Feb 28 07:12:28 MST 2014 Kieran Clancy <clancy.kieran@gmail.com> ACPI / EC: Clear stale EC events on Samsung systems A number of Samsung notebooks (530Uxx/535Uxx/540Uxx/550Pxx/900Xxx/etc) continue to log events during sleep (lid open/close, AC plug/unplug, battery level change), which accumulate in the EC until a buffer fills. After the buffer is full (tests suggest it holds 8 events), GPEs stop being triggered for new events. This state persists on wake or even on power cycle, and prevents new events from being registered until the EC is manually polled. This is the root cause of a number of bugs, including AC not being detected properly, lid close not triggering suspend, and low ambient light not triggering the keyboard backlight. The bug also seemed to be responsible for performance issues on at least one user's machine. Juan Manuel Cabo found the cause of bug and the workaround of polling the EC manually on wake. The loop which clears the stale events is based on an earlier patch by Lan Tianyu (see referenced attachment). This patch: - Adds a function acpi_ec_clear() which polls the EC for stale _Q events at most ACPI_EC_CLEAR_MAX (currently 100) times. A warning is logged if this limit is reached. - Adds a flag EC_FLAGS_CLEAR_ON_RESUME which is set to 1 if the DMI system vendor is Samsung. This check could be replaced by several more specific DMI vendor/product pairs, but it's likely that the bug affects more Samsung products than just the five series mentioned above. Further, it should not be harmful to run acpi_ec_clear() on systems without the bug; it will return immediately after finding no data waiting. - Runs acpi_ec_clear() on initialisation (boot), from acpi_ec_add() - Runs acpi_ec_clear() on wake, from acpi_ec_unblock_transactions() References: https://bugzilla.kernel.org/show_bug.cgi?id=44161 References: https://bugzilla.kernel.org/show_bug.cgi?id=45461 References: https://bugzilla.kernel.org/show_bug.cgi?id=57271 References: https://bugzilla.kernel.org/attachment.cgi?id=126801 Suggested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Dennis Jansen <dennis.jansen@web.de> Tested-by: Kieran Clancy <clancy.kieran@gmail.com> Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Tested-by: Dennis Jansen <dennis.jansen@web.de> Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com> Tested-by: San Zamoyski <san@plusnet.pl> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff a520d52e Fri Sep 28 01:22:00 MDT 2012 Feng Tang <feng.tang@intel.com> ACPI: EC: Make the GPE storm threshold a module parameter The Linux EC driver includes a mechanism to detect GPE storms, and switch from interrupt-mode to polling mode. However, polling mode sometimes doesn't work, so the workaround is problematic. Also, different systems seem to need the threshold for detecting the GPE storm at different levels. ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and was changed to 8 in 2.6.28 commit 06cf7d3c7 "ACPI: EC: lower interrupt storm threshold" to fix kernel bug 11892 by forcing the laptop in that bug to work in polling mode. However in bug 45151, it works fine in interrupt mode if we lift the threshold back to 20. This patch makes the threshold a module parameter so that user has a flexible option to debug/workaround this issue. The default is unchanged. This is also a preparation patch to fix specific systems: https://bugzilla.kernel.org/show_bug.cgi?id=45151 Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> cc: stable@vger.kernel.org diff 8b6cd8ad Sun Dec 12 22:38:46 MST 2010 Lin Ming <ming.m.lin@intel.com> ACPICA: New GPE handler callback definition The new GPE handler callback has 2 additional parameters, gpe_device and gpe_number. typedef u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> diff 8a383ef0 Tue Dec 09 12:45:30 MST 2008 Roel Kluin <roel.kluin@gmail.com> ACPI: ec.c, pci_link.c, video_detec.c: static Sparse asked whether these could be static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com> diff 8e0341ba Tue Sep 26 09:50:33 MDT 2006 Denis M. Sadykov <denis.m.sadykov@intel.com> ACPI: EC: Unify poll and interrupt gpe handlers Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
/linux-master/drivers/platform/x86/ | ||
H A D | toshiba_acpi.c | diff 8ef5db9e Fri Sep 02 12:00:36 MDT 2022 Arvid Norlander <lkml@vorpal.se> platform/x86: Battery charge mode in toshiba_acpi (sysfs) This commit adds the ACPI battery hook which in turns adds the sysfs entries. Because the Toshiba laptops only support two modes (eco or normal), which in testing correspond to 80% and 100% we simply round to the nearest possible level when set. It is possible that Toshiba laptops other than the Z830 has different set points for the charging. If so, a quirk table could be introduced in the future for this. For now, assume that all laptops that support this feature work the same way. Tested on a Toshiba Satellite Z830. Signed-off-by: Arvid Norlander <lkml@vorpal.se> Link: https://lore.kernel.org/r/20220902180037.1728546-3-lkml@vorpal.se Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 8baec45d Wed May 06 09:35:12 MDT 2015 Azael Avalos <coproscefalo@gmail.com> toshiba_acpi: Remove TOS_FAILURE check from some functions This patch removes the check for TOS_FAILURE whenever we are using the tci_raw function call, as that code is only returned by the {hci, sci}_{read, write} functions and never by the tci_raw, and thus making that check irrelevant. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> diff 93f8c16d Fri Sep 12 18:50:36 MDT 2014 Azael Avalos <coproscefalo@gmail.com> toshiba_acpi: Support new keyboard backlight type Newer Toshiba models now come with a new (and different) keyboard backlight implementation with three modes of operation: TIMER, ON and OFF, and the LED is now controlled internally by the firmware. This patch adds support for that type of backlight, changing the existing code to accomodate the new implementation. The timeout value range is now 1-60 seconds, and the accepted modes are now: 1 (FN-Z), 2 (AUTO or TIMER), 8 (ON) and 10 (OFF), this adds two new entries kbd_type and available_kbd_modes, the first shows the keyboard type and the latter shows the supported modes depending on the keyboard type. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff f11f999e Wed Jan 18 12:44:11 MST 2012 Seth Forshee <seth.forshee@canonical.com> toshiba_acpi: Refuse to load on machines with buggy INFO implementations Several Satellite models have a buggy implementation of the INFO method that causes ACPI exceptions when executed: ACPI Error: Result stack is empty! State=ffff88012d70f800 (20110413/dswstate-98) ACPI Exception: AE_AML_NO_RETURN_VALUE, Missing or null operand (20110413/dsutils-646) ACPI Exception: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20110413/dsutils-763) ACPI Error: Method parse/execution failed [\_SB_.VALZ.GETE] (Node ffff880131175eb0), AE_AML_NO_RETURN_VALUE (20110413/psparse-536) ACPI Error: Method parse/execution failed [\_SB_.VALZ.INFO] (Node ffff880131175ed8), AE_AML_NO_RETURN_VALUE (20110413/psparse-536) toshiba_acpi: ACPI INFO method execution failed toshiba_acpi: Failed to query hotkey event All known machines with this implementation also have a WMI interface with event GUID 59142400-C6A3-40FA-BADB-8A2652834100 which is not seen on any other models. Refuse to load toshiba_acpi on machines with this guid. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
H A D | acer-wmi.c | diff 8d05fc03 Fri Sep 30 04:59:14 MDT 2022 Barnabás Pőcze <pobrn@protonmail.com> platform/x86: use PLATFORM_DEVID_NONE instead of -1 Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1 when creating a platform device. No functional changes are intended. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 8c92a75e Thu Mar 24 06:15:20 MDT 2016 Lukas Wunner <lukas@wunner.de> acer-wmi: Use acpi_dev_found() Use shiny new acpi_dev_found() and remove all the boilerplate to search for a particular ACPI device. No functional change. Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8e2286ce Fri Dec 14 01:14:27 MST 2012 Lee, Chun-Yi <joeyli.kernel@gmail.com> acer-wmi: change to emit touchpad on off key KEY_TOUCHPAD_TOOGLE key is for notice userland change touchpad state via xf86-input-synaptics on the machine that don't toggle touchpad in hardware. But, acer laptop actually toggle touchpad in hardware. So, this patch change to emit KEY_TOUCHPAD_ON/OFF key when acer-wmi grab device state of touchpad. Reference: brc#848270 https://bugzilla.redhat.com/show_bug.cgi?id=848270 Tested-by: Nathanael Noblet <nathanael@gnat.ca> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> diff 8ae68de1 Tue May 24 02:35:55 MDT 2011 Melchior FRANZ <mfranz@aon.at> support wlan hotkey on Acer Travelmate 5735Z On an Acer Travelmate 5735Z-452G32Mnss the WLAN-enable/disable key doesn't send 0x1 as acpi event key code, but 0x3. This patch also makes the module ignore hotkey acpi events for functions that are already handled without. This avoids warning message "keyboard: can't emulate rawmode for keycode 240". Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Matthew Garrett <mjg@redhat.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
H A D | wmi.c | diff b7a4706f Wed Nov 22 17:48:18 MST 2023 Armin Wolf <W_Armin@gmx.de> hwmon: (dell-smm) Add support for WMI SMM interface Some Dell machines like the Dell Optiplex 7000 do not support the legacy SMM interface, but instead expect all SMM calls to be issued over a special WMI interface. Add support for this interface so users can control the fans on those machines. Tested-by: <serverror@serverror.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231123004820.50635-8-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> diff 8c33915d Sun Nov 28 12:00:29 MST 2021 Hans de Goede <hdegoede@redhat.com> platform/x86: wmi: Add no_notify_data flag to struct wmi_driver Some WMI implementations do notifies on WMI objects without a _WED method allow WMI drivers to indicate that _WED should not be called for notifies on the WMI objects the driver is bound to. Instead the driver's notify callback will simply be called with a NULL data argument. Reported-by: Yauhen Kharuzhy <jekhor@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211128190031.405620-3-hdegoede@redhat.com diff 84eacf7e Sat Sep 04 11:55:16 MDT 2021 Barnabás Pőcze <pobrn@protonmail.com> platform/x86: wmi: remove unnecessary argument The GUID block is available for `wmi_create_device()` through `wblock->gblock`. Use that consistently in the function instead of using a mix of `gblock` and `wblock->gblock`. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20210904175450.156801-8-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b14d7b2 Sun Nov 28 14:46:50 MST 2010 Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> wmi: use memcmp instead of strncmp to compare GUIDs While looking for the duplicates in /sys/class/wmi/, I couldn't find them. The code that looks for duplicates uses strncmp in a binary GUID, which may contain zero bytes. The right function is memcmp, which is also used in another section of wmi code. It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of 39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth printed, they were found as equal by strncmp. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@kernel.org diff 8b14d7b2 Sun Nov 28 14:46:50 MST 2010 Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> wmi: use memcmp instead of strncmp to compare GUIDs While looking for the duplicates in /sys/class/wmi/, I couldn't find them. The code that looks for duplicates uses strncmp in a binary GUID, which may contain zero bytes. The right function is memcmp, which is also used in another section of wmi code. It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of 39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth printed, they were found as equal by strncmp. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@kernel.org diff 8b14d7b2 Sun Nov 28 14:46:50 MST 2010 Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> wmi: use memcmp instead of strncmp to compare GUIDs While looking for the duplicates in /sys/class/wmi/, I couldn't find them. The code that looks for duplicates uses strncmp in a binary GUID, which may contain zero bytes. The right function is memcmp, which is also used in another section of wmi code. It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of 39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth printed, they were found as equal by strncmp. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@kernel.org diff 8e07514d Thu Aug 26 01:15:19 MDT 2010 Dmitry Torokhov <dmitry.torokhov@gmail.com> WMI: use pr_err() and friends This makes source more concise and easier to read. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
H A D | ideapad-laptop.c | diff f492f5f3 Sat Mar 09 16:31:42 MST 2024 Gergo Koteles <soyer@irl.hu> platform/x86: ideapad-laptop: map Fn + R key to KEY_REFRESH_RATE_TOGGLE Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event when Fn + R is pressed. This is intended for use to switch between the two refresh rates. The Fn + R key was incorrectly assigned to KEY_DISPLAYTOGGLE because it is used to toggle the display on and off. Map Fn + R key to the KEY_REFRESH_RATE_TOGGLE event code. Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/8fd36f0f016dde700396d8afaba1979d5dbc30a1.1710065750.git.soyer@irl.hu Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> diff be5dd7d8 Sat Oct 29 06:03:09 MDT 2022 Eray Orçunus <erayorcunus@gmail.com> platform/x86: ideapad-laptop: Add new _CFG bit numbers for future use Later IdeaPads report various things in last 8 bits of _CFG, at least 5 of them represent supported on-screen-displays. Add those bit numbers to the enum, and use CFG_OSD_ as prefix of their names. Also expose the values of these bits to debugfs, since they can be useful. Signed-off-by: Eray Orçunus <erayorcunus@gmail.com> Acked-by: Ike Panhc <ike.pan@canonical.com> Link: https://lore.kernel.org/r/20221029120311.11152-5-erayorcunus@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 58318828 Sat Oct 29 06:03:06 MDT 2022 Eray Orçunus <erayorcunus@gmail.com> platform/x86: ideapad-laptop: Revert "check for touchpad support in _CFG" Last 8 bit of _CFG started being used in later IdeaPads, thus 30th bit doesn't always show whether device supports touchpad or touchpad switch. Remove checking bit 30 of _CFG, so older IdeaPads like S10-3 can switch touchpad again via touchpad attribute. This reverts commit b3ed1b7fe378 ("platform/x86: ideapad-laptop: check for touchpad support in _CFG"). Signed-off-by: Eray Orçunus <erayorcunus@gmail.com> Acked-by: Ike Panhc <ike.pan@canonical.com> Link: https://lore.kernel.org/r/20221029120311.11152-2-erayorcunus@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 3ae86d2d Tue Aug 17 11:12:03 MDT 2021 Meng Dong <whenov@gmail.com> platform/x86: ideapad-laptop: Fix Legion 5 Fn lock LED This patch fixes the bug 212671. Althrough the Fn lock (Fn + Esc) works on Legion 5 (R7000P), its LED light does not change with the state. This modification sets the Fn lock state to its current value on receiving the wmi event 8FC0DE0C-B4E4-43FD-B0F3-8871711C1294 to update the LED state. Signed-off-by: Meng Dong <whenov@gmail.com> Link: https://lore.kernel.org/r/20210817171203.12855-1-whenov@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 8782d8d7 Wed Feb 03 14:55:05 MST 2021 Barnabás Pőcze <pobrn@protonmail.com> platform/x86: ideapad-laptop: use device_{add,remove}_group Use device_{add,remove}_group instead of sysfs_{add,remove}_group. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20210203215403.290792-8-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 5e8f42aa Tue Jul 04 09:34:39 MDT 2017 Andy Shevchenko <andriy.shevchenko@linux.intel.com> platform/x86: ideapad-laptop: Fix indentation in DMI table There are couple of places where 8 spaces are used instead of tabs. Replace former by latter. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 57ac3b05 Fri Oct 01 01:40:09 MDT 2010 Ike Panhc <ike.pan@canonical.com> ideapad: Change the driver name to ideapad-laptop Since the platform drivers doing more for laptops than just using specific ACPI device. It will be good to change the name from *_acpi to *-laptop. Reference: http://lkml.org/lkml/2010/8/14/154 Signed-off-by: Ike Panhc <ike.pan@canonical.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> |
H A D | sony-laptop.c | diff d524e9d6 Wed Oct 04 12:51:55 MDT 2023 Jeff Layton <jlayton@kernel.org> x86: convert to new timestamp accessors Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-8-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> diff 8d05fc03 Fri Sep 30 04:59:14 MDT 2022 Barnabás Pőcze <pobrn@protonmail.com> platform/x86: use PLATFORM_DEVID_NONE instead of -1 Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1 when creating a platform device. No functional changes are intended. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff d791db9a Thu Jun 29 23:09:47 MDT 2017 Arvind Yadav <arvind.yadav.cs@gmail.com> platform/x86: sony-laptop: constify attribute_group and input index array attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. The content of sony_laptop_input_index does not change and is declared as a static global array. Constify spic_attribute_group and sony_laptop_input_index. File size before: text data bss dec hex filename 31273 5176 372 36821 8fd5 drivers/platform/x86/sony-laptop.o File size After adding 'const': text data bss dec hex filename 31337 5112 372 36821 8fd5 drivers/platform/x86/sony-laptop.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> [dvhart: updated commit message, includes fix suggested by Arnd Bergmann] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> diff d791db9a Thu Jun 29 23:09:47 MDT 2017 Arvind Yadav <arvind.yadav.cs@gmail.com> platform/x86: sony-laptop: constify attribute_group and input index array attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. The content of sony_laptop_input_index does not change and is declared as a static global array. Constify spic_attribute_group and sony_laptop_input_index. File size before: text data bss dec hex filename 31273 5176 372 36821 8fd5 drivers/platform/x86/sony-laptop.o File size After adding 'const': text data bss dec hex filename 31337 5112 372 36821 8fd5 drivers/platform/x86/sony-laptop.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> [dvhart: updated commit message, includes fix suggested by Arnd Bergmann] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8a8bce1d Mon Sep 02 18:32:05 MDT 2013 Zhang Rui <rui.zhang@intel.com> sony-laptop: convert acpi_get_handle() to acpi_has_method() acpi_has_method() is a new ACPI API introduced to check the existence of an ACPI control method. It can be used to replace acpi_get_handle() in the case that 1. the calling function doesn't need the ACPI handle of the control method. and 2. the calling function doesn't care the reason why the method is unavailable. Convert acpi_get_handle() to acpi_has_method() in drivers/platform/x86/sony-laptop.c in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> CC: Matthew Garrett <matthew.garrett@nebula.com> CC: Mattia Dongili <malattia@linux.it> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 5a0e3ad6 Wed Mar 24 02:04:11 MDT 2010 Tejun Heo <tj@kernel.org> include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
H A D | asus-wmi.c | diff abac4259 Thu Jun 29 23:35:51 MDT 2023 Luke D. Jones <luke@ljones.dev> platform/x86: asus-wmi: support setting mini-LED mode Support changing the mini-LED mode on some of the newer ASUS laptops. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230630053552.976579-8-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 8e8fe446 Sun Jun 30 21:24:26 MDT 2019 Fuqian Huang <huangfq.daxian@gmail.com> platform/x86: asus-wmi: Use dev_get_drvdata() Using dev_get_drvdata directly. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff 8abd752b Tue May 14 13:01:24 MDT 2019 Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com> platform/x86: asus-wmi: Refactor WMI event handling Refactor WMI event handling into separate functions for getting the event code and handling the retrieved event code as a preparation for introduction of WMI event queue support. Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff 51bbf9be Thu Jul 19 16:27:43 MDT 2018 Lukas Wunner <lukas@wunner.de> PCI: hotplug: Demidlayer registration with the core When a hotplug driver calls pci_hp_register(), all steps necessary for registration are carried out in one go, including creation of a kobject and addition to sysfs. That's a problem for pciehp once it's converted to enable/disable the slot exclusively from the IRQ thread: The thread needs to be spawned after creation of the kobject (because it uses the kobject's name), but before addition to sysfs (because it will handle enable/disable requests submitted via sysfs). pci_hp_deregister() does offer a ->release callback that's invoked after deletion from sysfs and before destruction of the kobject. But because pci_hp_register() doesn't offer a counterpart, hotplug drivers' ->probe and ->remove code becomes asymmetric, which is error prone as recently discovered use-after-free bugs in pciehp's ->remove hook have shown. In a sense, this appears to be a case of the midlayer antipattern: "The core thesis of the "midlayer mistake" is that midlayers are bad and should not exist. That common functionality which it is so tempting to put in a midlayer should instead be provided as library routines which can [be] used, augmented, or ignored by each bottom level driver independently. Thus every subsystem that supports multiple implementations (or drivers) should provide a very thin top layer which calls directly into the bottom layer drivers, and a rich library of support code that eases the implementation of those drivers. This library is available to, but not forced upon, those drivers." -- Neil Brown (2009), https://lwn.net/Articles/336262/ The presence of midlayer traits in the PCI hotplug core might be ascribed to its age: When it was introduced in February 2002, the blessings of a library approach might not have been well known: https://git.kernel.org/tglx/history/c/a8a2069f432c For comparison, the driver core does offer split functions for creating a kobject (device_initialize()) and addition to sysfs (device_add()) as an alternative to carrying out everything at once (device_register()). This was introduced in October 2002: https://git.kernel.org/tglx/history/c/8b290eb19962 The odd ->release callback in the PCI hotplug core was added in 2003: https://git.kernel.org/tglx/history/c/69f8d663b595 Clearly, a library approach would not force every hotplug driver to implement a ->release callback, but rather allow the driver to remove the sysfs files, release its data structures and finally destroy the kobject. Alternatively, a driver may choose to remove everything with pci_hp_deregister(), then release its data structures. To this end, offer drivers pci_hp_initialize() and pci_hp_add() as a split-up version of pci_hp_register(). Likewise, offer pci_hp_del() and pci_hp_destroy() as a split-up version of pci_hp_deregister(). Eliminate the ->release callback and move its code into each driver's teardown routine. Declare pci_hp_deregister() void, in keeping with the usual kernel pattern that enablement can fail, but disablement cannot. It only returned an error if the caller passed in a NULL pointer or a slot which has never or is no longer registered or is sharing its name with another slot. Those would be bugs, so WARN about them. Few hotplug drivers actually checked the return value and those that did only printed a useless error message to dmesg. Remove that. For most drivers the conversion was straightforward since it doesn't matter whether the code in the ->release callback is executed before or after destruction of the kobject. But in the case of ibmphp, it was unclear to me whether setting slot_cur->ctrl and slot_cur->bus_on to NULL needs to happen before the kobject is destroyed, so I erred on the side of caution and ensured that the order stays the same. Another nontrivial case is pnv_php, I've found the list and kref logic difficult to understand, however my impression was that it is safe to delete the list element and drop the references until after the kobject is destroyed. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86 Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Scott Murray <scott@spiteful.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> diff cf48bf9e Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff cf48bf9e Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff cf48bf9e Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff cf48bf9e Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff 32ffd6e8 Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff 32ffd6e8 Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff 32ffd6e8 Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff 32ffd6e8 Tue May 22 15:30:15 MDT 2018 João Paulo Rechi Vita <jprvita@gmail.com> platform/x86: asus-wmi: Fix NULL pointer dereference Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
H A D | thinkpad_acpi.c | diff 942a4a61 Fri Oct 20 11:52:43 MDT 2023 Justin Stitt <justinstitt@google.com> platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous interfaces. We expect ec_fw_string to be NUL-terminated based on its use with format strings in thinkpad_acpi.c: 11241 | pr_notice("ThinkPad firmware release %s doesn't match the known patterns\n", 11242 | ec_fw_string); Moreover, NUL-padding is not required since ec_fw_string is explicitly zero-initialized: 11185 | char ec_fw_string[18] = {0}; When carefully copying bytes from one buffer to another in pre-determined blocks (like what's happening here with dmi_data): | static void find_new_ec_fwstr(const struct dmi_header *dm, void *private) | { | char *ec_fw_string = (char *) private; | const char *dmi_data = (const char *)dm; | /* | * ThinkPad Embedded Controller Program Table on newer models | * | * Offset | Name | Width | Description | * ---------------------------------------------------- | * 0x00 | Type | BYTE | 0x8C | * 0x01 | Length | BYTE | | * 0x02 | Handle | WORD | Varies | * 0x04 | Signature | BYTEx6 | ASCII for "LENOVO" | * 0x0A | OEM struct offset | BYTE | 0x0B | * 0x0B | OEM struct number | BYTE | 0x07, for this structure | * 0x0C | OEM struct revision | BYTE | 0x01, for this format | * 0x0D | ECP version ID | STR ID | | * 0x0E | ECP release date | STR ID | | */ | | /* Return if data structure not match */ | if (dm->type != 140 || dm->length < 0x0F || | memcmp(dmi_data + 4, "LENOVO", 6) != 0 || | dmi_data[0x0A] != 0x0B || dmi_data[0x0B] != 0x07 || | dmi_data[0x0C] != 0x01) | return; | | /* fwstr is the first 8byte string */ | strncpy(ec_fw_string, dmi_data + 0x0F, 8); ... we shouldn't be using a C string api. Let's instead use memcpy() as this more properly relays the intended behavior. Do note that ec_fw_string will still end up being NUL-terminated since we are memcpy'ing only 8 bytes into a buffer full of 18 zeroes. There's still some trailing NUL-bytes there. To ensure this behavior, let's add a BUILD_BUG_ON checking the length leaves space for at least one trailing NUL-byte. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231020-strncpy-drivers-platform-x86-thinkpad_acpi-c-v1-1-312f2e33034f@google.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> diff 942a4a61 Fri Oct 20 11:52:43 MDT 2023 Justin Stitt <justinstitt@google.com> platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous interfaces. We expect ec_fw_string to be NUL-terminated based on its use with format strings in thinkpad_acpi.c: 11241 | pr_notice("ThinkPad firmware release %s doesn't match the known patterns\n", 11242 | ec_fw_string); Moreover, NUL-padding is not required since ec_fw_string is explicitly zero-initialized: 11185 | char ec_fw_string[18] = {0}; When carefully copying bytes from one buffer to another in pre-determined blocks (like what's happening here with dmi_data): | static void find_new_ec_fwstr(const struct dmi_header *dm, void *private) | { | char *ec_fw_string = (char *) private; | const char *dmi_data = (const char *)dm; | /* | * ThinkPad Embedded Controller Program Table on newer models | * | * Offset | Name | Width | Description | * ---------------------------------------------------- | * 0x00 | Type | BYTE | 0x8C | * 0x01 | Length | BYTE | | * 0x02 | Handle | WORD | Varies | * 0x04 | Signature | BYTEx6 | ASCII for "LENOVO" | * 0x0A | OEM struct offset | BYTE | 0x0B | * 0x0B | OEM struct number | BYTE | 0x07, for this structure | * 0x0C | OEM struct revision | BYTE | 0x01, for this format | * 0x0D | ECP version ID | STR ID | | * 0x0E | ECP release date | STR ID | | */ | | /* Return if data structure not match */ | if (dm->type != 140 || dm->length < 0x0F || | memcmp(dmi_data + 4, "LENOVO", 6) != 0 || | dmi_data[0x0A] != 0x0B || dmi_data[0x0B] != 0x07 || | dmi_data[0x0C] != 0x01) | return; | | /* fwstr is the first 8byte string */ | strncpy(ec_fw_string, dmi_data + 0x0F, 8); ... we shouldn't be using a C string api. Let's instead use memcpy() as this more properly relays the intended behavior. Do note that ec_fw_string will still end up being NUL-terminated since we are memcpy'ing only 8 bytes into a buffer full of 18 zeroes. There's still some trailing NUL-bytes there. To ensure this behavior, let's add a BUILD_BUG_ON checking the length leaves space for at least one trailing NUL-byte. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231020-strncpy-drivers-platform-x86-thinkpad_acpi-c-v1-1-312f2e33034f@google.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> diff 942a4a61 Fri Oct 20 11:52:43 MDT 2023 Justin Stitt <justinstitt@google.com> platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous interfaces. We expect ec_fw_string to be NUL-terminated based on its use with format strings in thinkpad_acpi.c: 11241 | pr_notice("ThinkPad firmware release %s doesn't match the known patterns\n", 11242 | ec_fw_string); Moreover, NUL-padding is not required since ec_fw_string is explicitly zero-initialized: 11185 | char ec_fw_string[18] = {0}; When carefully copying bytes from one buffer to another in pre-determined blocks (like what's happening here with dmi_data): | static void find_new_ec_fwstr(const struct dmi_header *dm, void *private) | { | char *ec_fw_string = (char *) private; | const char *dmi_data = (const char *)dm; | /* | * ThinkPad Embedded Controller Program Table on newer models | * | * Offset | Name | Width | Description | * ---------------------------------------------------- | * 0x00 | Type | BYTE | 0x8C | * 0x01 | Length | BYTE | | * 0x02 | Handle | WORD | Varies | * 0x04 | Signature | BYTEx6 | ASCII for "LENOVO" | * 0x0A | OEM struct offset | BYTE | 0x0B | * 0x0B | OEM struct number | BYTE | 0x07, for this structure | * 0x0C | OEM struct revision | BYTE | 0x01, for this format | * 0x0D | ECP version ID | STR ID | | * 0x0E | ECP release date | STR ID | | */ | | /* Return if data structure not match */ | if (dm->type != 140 || dm->length < 0x0F || | memcmp(dmi_data + 4, "LENOVO", 6) != 0 || | dmi_data[0x0A] != 0x0B || dmi_data[0x0B] != 0x07 || | dmi_data[0x0C] != 0x01) | return; | | /* fwstr is the first 8byte string */ | strncpy(ec_fw_string, dmi_data + 0x0F, 8); ... we shouldn't be using a C string api. Let's instead use memcpy() as this more properly relays the intended behavior. Do note that ec_fw_string will still end up being NUL-terminated since we are memcpy'ing only 8 bytes into a buffer full of 18 zeroes. There's still some trailing NUL-bytes there. To ensure this behavior, let's add a BUILD_BUG_ON checking the length leaves space for at least one trailing NUL-byte. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231020-strncpy-drivers-platform-x86-thinkpad_acpi-c-v1-1-312f2e33034f@google.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> diff 8d05fc03 Fri Sep 30 04:59:14 MDT 2022 Barnabás Pőcze <pobrn@protonmail.com> platform/x86: use PLATFORM_DEVID_NONE instead of -1 Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1 when creating a platform device. No functional changes are intended. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff b288420e Tue Jan 11 16:18:27 MST 2022 Alexander Kobel <a-kobel@a-kobel.de> platform/x86: thinkpad_acpi: Add quirk for ThinkPads without a fan Some ThinkPad models, like the X1 Tablet 1st and 2nd Gen, are passively cooled without any fan. Currently, an entry in /proc/acpi/ibm/fan is nevertheless created, and misleadingly shows status: enabled speed: 65535 level: auto This patch adds a TPACPI_FAN_NOFAN quirk definition and corresponding handling to not initialize a fan interface at all. For the time being, the quirk is only applied for X1 Tablet 2nd Gen (types 20JB, 20JC; EC N1O...); further models (such as Gen1, types 20GG and 20GH) can be added easily once tested. Tested on a 20JCS00C00, BIOS N1OET58W (1.43), EC N1OHT34W. Signed-off-by: Alexander Kobel <a-kobel@a-kobel.de> Link: https://lore.kernel.org/r/12d4b825-a2b9-8cb7-6ed3-db4d66f46a60@a-kobel.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 3a0abea6 Sun Nov 21 12:11:29 MST 2021 Hans de Goede <hdegoede@redhat.com> platform/x86: thinkpad_acpi: Fix thermal_temp_input_attr sorting Fix thermal_temp_input_attr sorting. Now that we use is_visible, rather then registering only part of the thermal_temp_input_attr array, putting attr 0-7 last is no longer needed. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Mark Pearson <mpearson@lenovo.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211121191129.256713-8-hdegoede@redhat.com diff e8b7eb66 Tue Oct 05 14:23:19 MDT 2021 Hans de Goede <hdegoede@redhat.com> platform/x86: thinkpad_acpi: Get privacy-screen / lcdshadow ACPI handles only once Get the privacy-screen / lcdshadow ACPI handles once and cache them, instead of retrieving them every time we need them. Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Mark Pearson <markpearson@lenovo.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-8-hdegoede@redhat.com diff c47c0429 Fri Jan 15 09:06:30 MST 2021 Jeannie Stevenson <jeanniestevenson@protonmail.com> platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control This commit enables dual fan control for the new Lenovo P53 and P73 laptop models. Signed-off-by: Jeannie Stevenson <jeanniestevenson@protonmail.com> Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 173aac2f Fri Jan 15 09:06:30 MST 2021 Jeannie Stevenson <jeanniestevenson@protonmail.com> platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control This commit enables dual fan control for the new Lenovo P53 and P73 laptop models. Signed-off-by: Jeannie Stevenson <jeanniestevenson@protonmail.com> Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> diff 7ed7748d Tue Sep 08 01:21:11 MDT 2020 Hans de Goede <hdegoede@redhat.com> platform/x86: thinkpad_acpi: Add support for new hotkeys found on X1C8 / T14 New Lenovo Thinkpad models, e.g. the X1 Carbon 8th gen and the new T14 gen1 models have 3 new symbols / shortcuts on their F9-F11 keys (and the thinkpad_acpi driver receives 3 new hkey events for these): F9: Has a symbol resembling a rectangular speech balloon, the manual says the hotkey functions shows or hides the notification center F10: Has a symbol of a telephone horn which has been picked up from the receiver, the manual says: "Answer incoming calls" F11: Has a symbol of a telephone horn which is resting on the receiver, the manual says: "Decline incoming calls" And these Thinkpad models also send a new 0x1316 hkey events when the Fn + right Shift key-combo is pressed. This commit adds support for these 4 new hkey events. Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200908135147.4044-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
/linux-master/drivers/pci/hotplug/ | ||
H A D | pciehp.h | diff 085a9f43 Fri Dec 17 07:17:09 MST 2021 Hans de Goede <hdegoede@redhat.com> PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors Use down_read_nested() and down_write_nested() when taking the ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in the path to the PCI root bus as lock subclass parameter. This fixes the following false-positive lockdep report when unplugging a Lenovo X1C8 from a Lenovo 2nd gen TB3 dock: pcieport 0000:06:01.0: pciehp: Slot(1): Link Down pcieport 0000:06:01.0: pciehp: Slot(1): Card not present ============================================ WARNING: possible recursive locking detected 5.16.0-rc2+ #621 Not tainted -------------------------------------------- irq/124-pciehp/86 is trying to acquire lock: ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80 but task is already holding lock: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ctrl->reset_lock); lock(&ctrl->reset_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by irq/124-pciehp/86: #0: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180 #1: ffffffffa3b024e8 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pciehp_unconfigure_device+0x31/0x110 #2: ffff8e5ac1ee2248 (&dev->mutex){....}-{3:3}, at: device_release_driver+0x1c/0x40 stack backtrace: CPU: 4 PID: 86 Comm: irq/124-pciehp Not tainted 5.16.0-rc2+ #621 Hardware name: LENOVO 20U90SIT19/20U90SIT19, BIOS N2WET30W (1.20 ) 08/26/2021 Call Trace: <TASK> dump_stack_lvl+0x59/0x73 __lock_acquire.cold+0xc5/0x2c6 lock_acquire+0xb5/0x2b0 down_read+0x3e/0x50 pciehp_check_presence+0x23/0x80 pciehp_runtime_resume+0x5c/0xa0 device_for_each_child+0x45/0x70 pcie_port_device_runtime_resume+0x20/0x30 pci_pm_runtime_resume+0xa7/0xc0 __rpm_callback+0x41/0x110 rpm_callback+0x59/0x70 rpm_resume+0x512/0x7b0 __pm_runtime_resume+0x4a/0x90 __device_release_driver+0x28/0x240 device_release_driver+0x26/0x40 pci_stop_bus_device+0x68/0x90 pci_stop_bus_device+0x2c/0x90 pci_stop_and_remove_bus_device+0xe/0x20 pciehp_unconfigure_device+0x6c/0x110 pciehp_disable_slot+0x5b/0xe0 pciehp_handle_presence_or_link_change+0xc3/0x2f0 pciehp_ist+0x179/0x180 This lockdep warning is triggered because with Thunderbolt, hotplug ports are nested. When removing multiple devices in a daisy-chain, each hotplug port's reset_lock may be acquired recursively. It's never the same lock, so the lockdep splat is a false positive. Because locks at the same hierarchy level are never acquired recursively, a per-level lockdep class is sufficient to fix the lockdep warning. The choice to use one lockdep subclass per pcie-hotplug controller in the path to the root-bus was made to conserve class keys because their number is limited and the complexity grows quadratically with number of keys according to Documentation/locking/lockdep-design.rst. Link: https://lore.kernel.org/linux-pci/20190402021933.GA2966@mit.edu/ Link: https://lore.kernel.org/linux-pci/de684a28-9038-8fc6-27ca-3f6f2f6400d7@redhat.com/ Link: https://lore.kernel.org/r/20211217141709.379663-1-hdegoede@redhat.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=208855 Reported-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org diff 94dbc956 Tue May 07 17:24:51 MDT 2019 Frederick Lawler <fred@fredlawl.com> PCI: pciehp: Log messages with pci_dev, not pcie_device Log messages with pci_dev, not pcie_device. Factor out common message prefixes with dev_fmt(). Example output change: - pciehp 0000:00:06.0:pcie004: Slot(0) Powering on due to button press + pcieport 0000:00:06.0: pciehp: Slot(0) Powering on due to button press Link: https://lore.kernel.org/lkml/20190509141456.223614-8-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff dbd79aed Tue May 27 04:03:16 MDT 2008 Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[<ffffffff80494a8b>] [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [<ffffffff80495ab4>] pcie_isr+0x18e/0x1bc [<ffffffff80260831>] request_irq+0x106/0x12f [<ffffffff80495fb6>] pcie_init+0x15e/0x6cc [<ffffffff804933a3>] pciehp_probe+0x64/0x541 [<ffffffff8048f4e7>] pcie_port_probe_service+0x4c/0x76 [<ffffffff8054af70>] driver_probe_device+0xd4/0x1f0 [<ffffffff8054b108>] __driver_attach+0x7c/0x7e [<ffffffff8054b08c>] ? __driver_attach+0x0/0x7e [<ffffffff8054a4b6>] bus_for_each_dev+0x53/0x7d [<ffffffff8054ad3c>] driver_attach+0x1c/0x1e [<ffffffff8054a9c2>] bus_add_driver+0xdd/0x25b [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8054b288>] driver_register+0x5f/0x13e [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8048f441>] pcie_port_service_register+0x47/0x49 [<ffffffff80c09d52>] pcied_init+0x15/0x8b [<ffffffff80bf3938>] kernel_init+0x75/0x243 [<ffffffff808639d2>] ? _spin_unlock_irq+0x2b/0x3a [<ffffffff80228d1f>] ? finish_task_switch+0x57/0x9a [<ffffffff8020c258>] child_rip+0xa/0x12 [<ffffffff8020bcec>] ? restore_args+0x0/0x30 [<ffffffff80bf38c3>] ? kernel_init+0x0/0x243 [<ffffffff8020c24e>] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP <ffff81003f83fbb0> CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> diff dbd79aed Tue May 27 04:03:16 MDT 2008 Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[<ffffffff80494a8b>] [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [<ffffffff80495ab4>] pcie_isr+0x18e/0x1bc [<ffffffff80260831>] request_irq+0x106/0x12f [<ffffffff80495fb6>] pcie_init+0x15e/0x6cc [<ffffffff804933a3>] pciehp_probe+0x64/0x541 [<ffffffff8048f4e7>] pcie_port_probe_service+0x4c/0x76 [<ffffffff8054af70>] driver_probe_device+0xd4/0x1f0 [<ffffffff8054b108>] __driver_attach+0x7c/0x7e [<ffffffff8054b08c>] ? __driver_attach+0x0/0x7e [<ffffffff8054a4b6>] bus_for_each_dev+0x53/0x7d [<ffffffff8054ad3c>] driver_attach+0x1c/0x1e [<ffffffff8054a9c2>] bus_add_driver+0xdd/0x25b [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8054b288>] driver_register+0x5f/0x13e [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8048f441>] pcie_port_service_register+0x47/0x49 [<ffffffff80c09d52>] pcied_init+0x15/0x8b [<ffffffff80bf3938>] kernel_init+0x75/0x243 [<ffffffff808639d2>] ? _spin_unlock_irq+0x2b/0x3a [<ffffffff80228d1f>] ? finish_task_switch+0x57/0x9a [<ffffffff8020c258>] child_rip+0xa/0x12 [<ffffffff8020bcec>] ? restore_args+0x0/0x30 [<ffffffff80bf38c3>] ? kernel_init+0x0/0x243 [<ffffffff8020c24e>] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP <ffff81003f83fbb0> CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> diff dbd79aed Tue May 27 04:03:16 MDT 2008 Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[<ffffffff80494a8b>] [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [<ffffffff80495ab4>] pcie_isr+0x18e/0x1bc [<ffffffff80260831>] request_irq+0x106/0x12f [<ffffffff80495fb6>] pcie_init+0x15e/0x6cc [<ffffffff804933a3>] pciehp_probe+0x64/0x541 [<ffffffff8048f4e7>] pcie_port_probe_service+0x4c/0x76 [<ffffffff8054af70>] driver_probe_device+0xd4/0x1f0 [<ffffffff8054b108>] __driver_attach+0x7c/0x7e [<ffffffff8054b08c>] ? __driver_attach+0x0/0x7e [<ffffffff8054a4b6>] bus_for_each_dev+0x53/0x7d [<ffffffff8054ad3c>] driver_attach+0x1c/0x1e [<ffffffff8054a9c2>] bus_add_driver+0xdd/0x25b [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8054b288>] driver_register+0x5f/0x13e [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8048f441>] pcie_port_service_register+0x47/0x49 [<ffffffff80c09d52>] pcied_init+0x15/0x8b [<ffffffff80bf3938>] kernel_init+0x75/0x243 [<ffffffff808639d2>] ? _spin_unlock_irq+0x2b/0x3a [<ffffffff80228d1f>] ? finish_task_switch+0x57/0x9a [<ffffffff8020c258>] child_rip+0xa/0x12 [<ffffffff8020bcec>] ? restore_args+0x0/0x30 [<ffffffff80bf38c3>] ? kernel_init+0x0/0x243 [<ffffffff8020c24e>] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP <ffff81003f83fbb0> CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> diff dbd79aed Tue May 27 04:03:16 MDT 2008 Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[<ffffffff80494a8b>] [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [<ffffffff80495ab4>] pcie_isr+0x18e/0x1bc [<ffffffff80260831>] request_irq+0x106/0x12f [<ffffffff80495fb6>] pcie_init+0x15e/0x6cc [<ffffffff804933a3>] pciehp_probe+0x64/0x541 [<ffffffff8048f4e7>] pcie_port_probe_service+0x4c/0x76 [<ffffffff8054af70>] driver_probe_device+0xd4/0x1f0 [<ffffffff8054b108>] __driver_attach+0x7c/0x7e [<ffffffff8054b08c>] ? __driver_attach+0x0/0x7e [<ffffffff8054a4b6>] bus_for_each_dev+0x53/0x7d [<ffffffff8054ad3c>] driver_attach+0x1c/0x1e [<ffffffff8054a9c2>] bus_add_driver+0xdd/0x25b [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8054b288>] driver_register+0x5f/0x13e [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8048f441>] pcie_port_service_register+0x47/0x49 [<ffffffff80c09d52>] pcied_init+0x15/0x8b [<ffffffff80bf3938>] kernel_init+0x75/0x243 [<ffffffff808639d2>] ? _spin_unlock_irq+0x2b/0x3a [<ffffffff80228d1f>] ? finish_task_switch+0x57/0x9a [<ffffffff8020c258>] child_rip+0xa/0x12 [<ffffffff8020bcec>] ? restore_args+0x0/0x30 [<ffffffff80bf38c3>] ? kernel_init+0x0/0x243 [<ffffffff8020c24e>] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP <ffff81003f83fbb0> CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> diff dbd79aed Tue May 27 04:03:16 MDT 2008 Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[<ffffffff80494a8b>] [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [<ffffffff80495ab4>] pcie_isr+0x18e/0x1bc [<ffffffff80260831>] request_irq+0x106/0x12f [<ffffffff80495fb6>] pcie_init+0x15e/0x6cc [<ffffffff804933a3>] pciehp_probe+0x64/0x541 [<ffffffff8048f4e7>] pcie_port_probe_service+0x4c/0x76 [<ffffffff8054af70>] driver_probe_device+0xd4/0x1f0 [<ffffffff8054b108>] __driver_attach+0x7c/0x7e [<ffffffff8054b08c>] ? __driver_attach+0x0/0x7e [<ffffffff8054a4b6>] bus_for_each_dev+0x53/0x7d [<ffffffff8054ad3c>] driver_attach+0x1c/0x1e [<ffffffff8054a9c2>] bus_add_driver+0xdd/0x25b [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8054b288>] driver_register+0x5f/0x13e [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8048f441>] pcie_port_service_register+0x47/0x49 [<ffffffff80c09d52>] pcied_init+0x15/0x8b [<ffffffff80bf3938>] kernel_init+0x75/0x243 [<ffffffff808639d2>] ? _spin_unlock_irq+0x2b/0x3a [<ffffffff80228d1f>] ? finish_task_switch+0x57/0x9a [<ffffffff8020c258>] child_rip+0xa/0x12 [<ffffffff8020bcec>] ? restore_args+0x0/0x30 [<ffffffff80bf38c3>] ? kernel_init+0x0/0x243 [<ffffffff8020c24e>] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP <ffff81003f83fbb0> CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> diff ae416e6b Fri Apr 25 15:39:06 MDT 2008 Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> pciehp: Fix wrong slot capability check Current pciehp saves only 8bits of Slot Capability registers in ctrl->ctrlcap. But it refers more than 8bit for checking EMI capability. It is clearly a bug and EMI would never work. To fix this problem, this patch saves full Slot Capability contens in ctrl->slot_cap. It also reduce the redundant reads of Slot Capability register. And this pach also cleans up the macros to check the slot capabilitys (e.g. MRL_SENS(), and so on). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> diff ae416e6b Fri Apr 25 15:39:06 MDT 2008 Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> pciehp: Fix wrong slot capability check Current pciehp saves only 8bits of Slot Capability registers in ctrl->ctrlcap. But it refers more than 8bit for checking EMI capability. It is clearly a bug and EMI would never work. To fix this problem, this patch saves full Slot Capability contens in ctrl->slot_cap. It also reduce the redundant reads of Slot Capability register. And this pach also cleans up the macros to check the slot capabilitys (e.g. MRL_SENS(), and so on). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> |
/linux-master/drivers/pci/ | ||
H A D | pci-acpi.c | diff 70b70a43 Mon Sep 18 06:48:01 MDT 2023 Lukas Wunner <lukas@wunner.de> PCI/sysfs: Protect driver's D3cold preference from user space struct pci_dev contains two flags which govern whether the device may suspend to D3cold: * no_d3cold provides an opt-out for drivers (e.g. if a device is known to not wake from D3cold) * d3cold_allowed provides an opt-out for user space (default is true, user space may set to false) Since commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend"), the user space setting overwrites the driver setting. Essentially user space is trusted to know better than the driver whether D3cold is working. That feels unsafe and wrong. Assume that the change was introduced inadvertently and do not overwrite no_d3cold when d3cold_allowed is modified. Instead, consider d3cold_allowed in addition to no_d3cold when choosing a suspend state for the device. That way, user space may opt out of D3cold if the driver hasn't, but it may no longer force an opt in if the driver has opted out. Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Link: https://lore.kernel.org/r/b8a7f4af2b73f6b506ad8ddee59d747cbf834606.1695025365.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org # v4.8+ diff 3fb937f4 Fri Oct 01 07:58:10 MDT 2021 Rafael J. Wysocki <rafael.j.wysocki@intel.com> PCI: ACPI: Check parent pointer in acpi_pci_find_companion() If acpi_pci_find_companion() is called for a device whose parent pointer is NULL, it will crash when attempting to get the ACPI companion of the parent due to a NULL pointer dereference in the ACPI_COMPANION() macro. This was not a problem before commit 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") that made pci_setup_device() call pci_set_acpi_fwnode() and so it allowed devices with NULL parent pointers to be passed to acpi_pci_find_companion() which is the case in pci_iov_add_virtfn(), for instance. Fix this issue by making acpi_pci_find_companion() check the device's parent pointer upfront and bail out if it is NULL. While pci_iov_add_virtfn() can be changed to set the device's parent pointer before calling pci_setup_device() for it, checking pointers against NULL before dereferencing them is prudent anyway and looking for ACPI companions of virtual functions isn't really useful. Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") Link: https://lore.kernel.org/linux-acpi/8e4bbd5c59de31db71f718556654c0aa077df03d.camel@linux.ibm.com/ Reported-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> diff 375553a9 Tue Aug 17 12:04:58 MDT 2021 Shanker Donthineni <sdonthineni@nvidia.com> PCI: Setup ACPI fwnode early and at the same time with OF Previously, the ACPI_COMPANION() of a pci_dev was usually set by acpi_bind_one() in this path: pci_device_add pci_configure_device pci_init_capabilities device_add device_platform_notify acpi_platform_notify acpi_device_notify # KOBJ_ADD acpi_bind_one ACPI_COMPANION_SET However, things like pci_configure_device() and pci_init_capabilities() that run before device_add() need the ACPI_COMPANION, e.g., acpi_pci_bridge_d3() uses a _DSD method to learn about D3 support. These places had special-case code to manually look up the ACPI_COMPANION. Set the ACPI_COMPANION earlier, in pci_setup_device(), so it will be available while configuring the device. This covers both paths to creating pci_dev objects: pci_scan_single_device # for normal non-SR-IOV devices pci_scan_device pci_setup_device pci_set_acpi_fwnode pci_device_add pci_iov_add_virtfn # for SR-IOV virtual functions pci_setup_device pci_set_acpi_fwnode Also move the OF fwnode setup to the same spot. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20210817180500.1253-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> diff 4273e64c Tue Aug 17 15:09:47 MDT 2021 Shanker Donthineni <sdonthineni@nvidia.com> PCI: Use acpi_pci_power_manageable() Use acpi_pci_power_manageable() instead of duplicating the logic in acpi_pci_bridge_d3(). No functional change intended. [bhelgaas: split out from https://lore.kernel.org/r/20210817180500.1253-8-ameynarkhede03@gmail.com] Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> diff 8c3aac6e Tue Aug 27 03:49:50 MDT 2019 Krzysztof Wilczynski <kw@linux.com> PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c Move program_hpx_type0(), program_hpx_type1(), etc., and enums hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific. Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and drivers/pci/probe.c. Link: https://lore.kernel.org/r/20190827094951.10613-3-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> diff 83a16e3f Tue Jun 25 04:29:40 MDT 2019 Mika Westerberg <mika.westerberg@linux.intel.com> PCI / ACPI: Use cached ACPI device state to get PCI device power state The ACPI power state returned by acpi_device_get_power() may depend on the configuration of ACPI power resources in the system which may change any time after acpi_device_get_power() has returned, unless the reference counters of the ACPI power resources in question are set to prevent that from happening. Thus it is invalid to use acpi_device_get_power() in acpi_pci_get_power_state() the way it is done now and the value of the ->power.state field in the corresponding struct acpi_device objects (which reflects the ACPI power resources reference counting, among other things) should be used instead. As an example where this becomes an issue is Intel Ice Lake where the Thunderbolt controller (NHI), two PCIe root ports (RP0 and RP1) and xHCI all share the same power resources. The following picture with power resources marked with [] shows the topology: Host bridge | +- RP0 ---\ +- RP1 ---|--+--> [TBT] +- NHI --/ | | | | v +- xHCI --> [D3C] Here TBT and D3C are the shared ACPI power resources. ACPI _PR3() method of the devices in question returns either TBT or D3C or both. Say we runtime suspend first the root ports RP0 and RP1, then NHI. Now since the TBT power resource is still on when the root ports are runtime suspended their dev->current_state is set to D3hot. When NHI is runtime suspended TBT is finally turned off but state of the root ports remain to be D3hot. Now when the xHCI is runtime suspended D3C gets also turned off. PCI core thus has power states of these devices cached in their dev->current_state as follows: RP0 -> D3hot RP1 -> D3hot NHI -> D3cold xHCI -> D3cold If the user now runs lspci for instance, the result is all 1's like in the below output (00:07.0 is the first root port, RP0): 00:07.0 PCI bridge: Intel Corporation Device 8a1d (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel driver in use: pcieport In short the hardware state is not in sync with the software state anymore. The exact same thing happens with the PME polling thread which ends up bringing the root ports back into D0 after they are runtime suspended. For this reason, modify acpi_pci_get_power_state() so that it uses the ACPI device power state that was cached by the ACPI core. This makes the PCI device power state match the ACPI device power state regardless of state of the shared power resources which may still be on at this point. Link: https://lore.kernel.org/r/20190618161858.77834-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff e33caa82 Wed Mar 25 00:37:06 MDT 2015 Aaron Lu <aaron.lu@intel.com> PCI/ACPI: Optimize device state transition delays The PCI "ACPI additions for FW latency optimizations" ECN (link below) defines two functions in the PCI _DSM: Function 8, "Reset Delay," applies to the entire hierarchy below a PCI host bridge. If it returns one, the OS may assume that all devices in the hierarchy have already completed power-on reset delays. Function 9, "Device Readiness Durations," applies only to the object where it is located. It returns delay durations required after various events if the device requires less time than the spec requires. Delays from this function take precedence over the Reset Delay function. Add support for Reset Delay and part of Device Readiness Durations. [bhelgaas: changelog, comments] Link: https://www.pcisig.com/specifications/conventional/pci_firmware/ECN_fw_latency_optimization_final.pdf Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 6c0cc950 Wed Jan 09 14:33:37 MST 2013 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI / PCI: Set root bridge ACPI handle in advance The ACPI handles of PCI root bridges need to be known to acpi_bind_one(), so that it can create the appropriate "firmware_node" and "physical_node" files for them, but currently the way it gets to know those handles is not exactly straightforward (to put it lightly). This is how it works, roughly: 1. acpi_bus_scan() finds the handle of a PCI root bridge, creates a struct acpi_device object for it and passes that object to acpi_pci_root_add(). 2. acpi_pci_root_add() creates a struct acpi_pci_root object, populates its "device" field with its argument's address (device->handle is the ACPI handle found in step 1). 3. The struct acpi_pci_root object created in step 2 is passed to pci_acpi_scan_root() and used to get resources that are passed to pci_create_root_bus(). 4. pci_create_root_bus() creates a struct pci_host_bridge object and passes its "dev" member to device_register(). 5. platform_notify(), which for systems with ACPI is set to acpi_platform_notify(), is called. So far, so good. Now it starts to be "interesting". 6. acpi_find_bridge_device() is used to find the ACPI handle of the given device (which is the PCI root bridge) and executes acpi_pci_find_root_bridge(), among other things, for the given device object. 7. acpi_pci_find_root_bridge() uses the name (sic!) of the given device object to extract the segment and bus numbers of the PCI root bridge and passes them to acpi_get_pci_rootbridge_handle(). 8. acpi_get_pci_rootbridge_handle() browses the list of ACPI PCI root bridges and finds the one that matches the given segment and bus numbers. Its handle is then used to initialize the ACPI handle of the PCI root bridge's device object by acpi_bind_one(). However, this is *exactly* the ACPI handle we started with in step 1. Needless to say, this is quite embarassing, but it may be avoided thanks to commit f3fd0c8 (ACPI: Allow ACPI handles of devices to be initialized in advance), which makes it possible to initialize the ACPI handle of a device before passing it to device_register(). Accordingly, add a new __weak routine, pcibios_root_bridge_prepare(), defaulting to an empty implementation that can be replaced by the interested architecutres (x86 and ia64 at the moment) with functions that will set the root bridge's ACPI handle before its dev member is passed to device_register(). Make both x86 and ia64 provide such implementations of pcibios_root_bridge_prepare() and remove acpi_pci_find_root_bridge() and acpi_get_pci_rootbridge_handle() that aren't necessary any more. Included is a fix for breakage on systems with non-ACPI PCI host bridges from Bjorn Helgaas. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
/linux-master/arch/x86/kernel/apic/ | ||
H A D | io_apic.c | diff 51130d21 Sat Oct 24 15:35:31 MDT 2020 David Woodhouse <dwmw@amazon.co.uk> x86/ioapic: Handle Extended Destination ID field in RTE Bits 63-48 of the I/OAPIC Redirection Table Entry map directly to bits 19-4 of the address used in the resulting MSI cycle. Historically, the x86 MSI format only used the top 8 of those 16 bits as the destination APIC ID, and the "Extended Destination ID" in the lower 8 bits was unused. With interrupt remapping, the lowest bit of the Extended Destination ID (bit 48 of RTE, bit 4 of MSI address) is now used to indicate a remappable format MSI. A hypervisor can use the other 7 bits of the Extended Destination ID to permit guests to address up to 15 bits of APIC IDs, thus allowing 32768 vCPUs before having to expose a vIOMMU and interrupt remapping to the guest. No behavioural change in this patch, since nothing yet permits APIC IDs above 255 to be used with the non-IR I/OAPIC domain. [ tglx: Converted it to the cleaned up entry/msi_msg format and added commentry ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-32-dwmw2@infradead.org diff 51130d21 Sat Oct 24 15:35:31 MDT 2020 David Woodhouse <dwmw@amazon.co.uk> x86/ioapic: Handle Extended Destination ID field in RTE Bits 63-48 of the I/OAPIC Redirection Table Entry map directly to bits 19-4 of the address used in the resulting MSI cycle. Historically, the x86 MSI format only used the top 8 of those 16 bits as the destination APIC ID, and the "Extended Destination ID" in the lower 8 bits was unused. With interrupt remapping, the lowest bit of the Extended Destination ID (bit 48 of RTE, bit 4 of MSI address) is now used to indicate a remappable format MSI. A hypervisor can use the other 7 bits of the Extended Destination ID to permit guests to address up to 15 bits of APIC IDs, thus allowing 32768 vCPUs before having to expose a vIOMMU and interrupt remapping to the guest. No behavioural change in this patch, since nothing yet permits APIC IDs above 255 to be used with the non-IR I/OAPIC domain. [ tglx: Converted it to the cleaned up entry/msi_msg format and added commentry ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-32-dwmw2@infradead.org diff 8c44963b Sat Oct 24 15:35:08 MDT 2020 Thomas Gleixner <tglx@linutronix.de> x86/apic: Cleanup destination mode apic::irq_dest_mode is actually a boolean, but defined as u32 and named in a way which does not explain what it means. Make it a boolean and rename it to 'dest_mode_logical' Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-9-dwmw2@infradead.org diff 8a7f97b9 Tue Mar 12 00:30:31 MDT 2019 Mike Rapoport <rppt@kernel.org> treewide: add checks for the return value of memblock_alloc*() Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 51b146c5 Tue Feb 13 22:46:55 MST 2018 Baoquan He <bhe@redhat.com> x86/apic: Rename variables and functions related to x86_io_apic_ops The names of x86_io_apic_ops and its two member variables are misleading: The ->read() member is to read IO_APIC reg, while ->disable() which is called by native_disable_io_apic()/irq_remapping_disable_io_apic() is actually used to restore boot IRQ mode, not to disable the IO-APIC. So rename x86_io_apic_ops to 'x86_apic_ops' since it doesn't only handle the IO-APIC, but also the local APIC. Also rename its member variables and the related callbacks. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-6-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> diff 50374b96 Tue Feb 13 22:46:54 MST 2018 Baoquan He <bhe@redhat.com> x86/apic: Remove the (now) unused disable_IO_APIC() function No one uses it anymore. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-5-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> diff 3c9e76db Tue Feb 13 22:46:52 MST 2018 Baoquan He <bhe@redhat.com> x86/apic: Split disable_IO_APIC() into two functions to fix CONFIG_KEXEC_JUMP=y Split following patches disable_IO_APIC() will be broken up into clear_IO_APIC() and restore_boot_irq_mode(). These two functions will be called separately where they are needed to fix a regression introduced by: 522e66464467 ("x86/apic: Disable I/O APIC before shutdown of the local APIC"). While the CONFIG_KEXEC_JUMP=y code doesn't call lapic_shutdown() before jump like kexec/kdump, so it's not impacted by commit 522e66464467. Hence here change clear_IO_APIC() as public, and replace disable_IO_APIC() with clear_IO_APIC() and restore_boot_irq_mode() to keep CONFIG_KEXEC_JUMP=y code unchanged in essence. No functional change. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-3-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> diff ce279cdc Tue Feb 13 22:46:51 MST 2018 Baoquan He <bhe@redhat.com> x86/apic: Split out restore_boot_irq_mode() from disable_IO_APIC() This is a preparation patch. Split out the code which restores boot irq mode from disable_IO_APIC() into the new restore_boot_irq_mode() function. No functional changes. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-2-bhe@redhat.com [ Build fix for !CONFIG_IO_APIC and rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> diff 90ad9e2d Wed Sep 13 15:29:49 MDT 2017 Thomas Gleixner <tglx@linutronix.de> x86/io_apic: Reevaluate vector configuration on activate() With the upcoming reservation/management scheme, early activation will assign a special vector. The final activation at request_irq() assigns a real vector, which needs to be updated in the ioapic. Split out the reconfiguration code in set_affinity and use it for reactivation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213156.025232175@linutronix.de diff 3534be05 Wed Sep 13 15:29:33 MDT 2017 Thomas Gleixner <tglx@linutronix.de> x86/ioapic: Mark legacy vectors at reallocation time When the legacy PIC vectors are taken over by the IO APIC the current vector assignement code is tricked to reuse the vector by allocating the apic data in the early boot process. This can be avoided by marking the allocation as legacy PIC take over. Preparatory patch for further cleanups. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213154.700501979@linutronix.de |
/linux-master/include/acpi/ | ||
H A D | acpi_bus.h | diff 8eb99e9a Wed Apr 07 11:58:20 MDT 2021 Hans de Goede <hdegoede@redhat.com> ACPI: utils: Add acpi_reduced_hardware() helper Add a getter for the acpi_gbl_reduced_hardware variable so that modules can check if they are running on an ACPI reduced-hw platform or not. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b9d6802 Fri Jul 21 05:39:33 MDT 2017 Sakari Ailus <sakari.ailus@linux.intel.com> ACPI: Constify acpi_bus helper functions, switch to macros Constify arguments to is_acpi_node(), is_acpi_device_node(), is_acpi_static_node() and acpi_data_node_match(). Make to_acpi_device_node() and to_acpi_data_node() macros that can cope with const and non-const arguments. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff d760a1ba Mon Nov 21 03:01:39 MST 2016 Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> ACPI: Implement acpi_dma_configure On DT based systems, the of_dma_configure() API implements DMA configuration for a given device. On ACPI systems an API equivalent to of_dma_configure() is missing which implies that it is currently not possible to set-up DMA operations for devices through the ACPI generic kernel layer. This patch fills the gap by introducing acpi_dma_configure/deconfigure() calls that for now are just wrappers around arch_setup_dma_ops() and arch_teardown_dma_ops() and also updates ACPI and PCI core code to use the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions. Since acpi_dma_configure() is used to configure DMA operations, the function initializes the dma/coherent_dma masks to sane default values if the current masks are uninitialized (also to keep the default values consistent with DT systems) to make sure the device has a complete default DMA set-up. The DMA range size passed to arch_setup_dma_ops() is sized according to the device coherent_dma_mask (starting at address 0x0), mirroring the DT probing path behaviour when a dma-ranges property is not provided for the device being probed; this changes the current arch_setup_dma_ops() call parameters in the ACPI probing case, but since arch_setup_dma_ops() is a NOP on all architectures but ARM/ARM64 this patch does not change the current kernel behaviour on them. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [pci] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com> diff c181fb3e Mon Jun 22 14:38:53 MDT 2015 Alexander Sverdlin <alexander.sverdlin@gmail.com> ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() Commit 8a0662d9 introduced of_node and acpi_node symbols in global namespace but there were already ~63 of_node local variables or function parameters (no single acpi_node though, but anyway). After debugging undefined but used of_node local varible (which turned out to reference static function of_node() instead) it became clear that the names for the functions are too short and too generic for global scope. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8a0662d9 Tue Nov 04 06:03:59 MST 2014 Rafael J. Wysocki <rafael.j.wysocki@intel.com> Driver core: Unified interface for firmware node properties Add new generic routines are provided for retrieving properties from device description objects in the platform firmware in case there are no struct device objects for them (either those objects have not been created yet or they do not exist at all). The following functions are provided: fwnode_property_present() fwnode_property_read_u8() fwnode_property_read_u16() fwnode_property_read_u32() fwnode_property_read_u64() fwnode_property_read_string() fwnode_property_read_u8_array() fwnode_property_read_u16_array() fwnode_property_read_u32_array() fwnode_property_read_u64_array() fwnode_property_read_string_array() in analogy with the corresponding functions for struct device added previously. For all of them, the first argument is a pointer to struct fwnode_handle (new type) that allows a device description object (depending on what platform firmware interface is in use) to be obtained. Add a new macro device_for_each_child_node() for iterating over the children of the device description object associated with a given device and a new function device_get_child_node_count() returning the number of a given device's child nodes. The interface covers both ACPI and Device Trees. Suggested-by: Grant Likely <grant.likely@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff ffdcd955 Tue Oct 21 05:33:55 MDT 2014 Mika Westerberg <mika.westerberg@linux.intel.com> ACPI: Add support for device specific properties Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff ffdcd955 Tue Oct 21 05:33:55 MDT 2014 Mika Westerberg <mika.westerberg@linux.intel.com> ACPI: Add support for device specific properties Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8ab17fc9 Sat Sep 20 18:58:18 MDT 2014 Rafael J. Wysocki <rafael.j.wysocki@intel.com> ACPI / hotplug: Generate online uevents for ACPI containers Commit 46394fd01 (ACPI / hotplug: Move container-specific code out of the core) removed the generation of "online" uevents for containers, because "add" uevents are now generated for them automatically when container system devices are registered. However, there are user space tools that need to be notified when the container and all of its children have been enumerated, which doesn't happen any more. For this reason, add a mechanism allowing "online" uevents to be generated for ACPI containers after enumerating the container along with all of its children. Fixes: 46394fd01 (ACPI / hotplug: Move container-specific code out of the core) Reported-and-tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
/linux-master/drivers/hv/ | ||
H A D | vmbus_drv.c | diff 8bc69f86 Thu Feb 03 10:30:08 MST 2022 Miaoqian Lin <linmq006@gmail.com> Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add(): If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com> Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> diff 8b6a877c Sun Apr 05 18:15:06 MDT 2020 Andrea Parri (Microsoft) <parri.andrea@gmail.com> Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> diff 8a857c55 Sun Apr 05 18:15:04 MDT 2020 Andrea Parri (Microsoft) <parri.andrea@gmail.com> Drivers: hv: vmbus: Always handle the VMBus messages on CPU0 A Linux guest have to pick a "connect CPU" to communicate with the Hyper-V host. This CPU can not be taken offline because Hyper-V does not provide a way to change that CPU assignment. Current code sets the connect CPU to whatever CPU ends up running the function vmbus_negotiate_version(), and this will generate problems if that CPU is taken offine. Establish CPU0 as the connect CPU, and add logics to prevents the connect CPU from being taken offline. We could pick some other CPU, and we could pick that "other CPU" dynamically if there was a reason to do so at some point in the future. But for now, #defining the connect CPU to 0 is the most straightforward and least complex solution. While on this, add inline comments explaining "why" offer and rescind messages should not be handled by a same serialized work queue. Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20200406001514.19876-2-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> diff 8aea7f82 Fri Nov 01 14:00:04 MDT 2019 Davidlohr Bueso <dave@stgolabs.net> drivers/hv: Replace binary semaphore with mutex At a slight footprint cost (24 vs 32 bytes), mutexes are more optimal than semaphores; it's also a nicer interface for mutual exclusion, which is why they are encouraged over binary semaphores, when possible. Replace the hyperv_mmio_lock, its semantics implies traditional lock ownership; that is, the lock owner is the same for both lock/unlock operations. Therefore it is safe to convert. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> diff 8afc06dd Sat Jul 28 15:58:46 MDT 2018 Sunil Muthuswamy <sunilmut@microsoft.com> Drivers: hv: vmbus: Fix the issue with freeing up hv_ctl_table_hdr The check to free the Hyper-V control table header was reversed. This fixes it. Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff 8b1f91fb Sat Mar 04 18:27:12 MST 2017 Stephen Hemminger <stephen@networkplumber.org> vmbus: remove useless return's No need for empty return at end of void function Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8b48463f Mon Dec 02 17:49:16 MST 2013 Lv Zheng <lv.zheng@intel.com> ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> diff 8f257a14 Tue Dec 27 14:49:37 MST 2011 K. Y. Srinivasan <kys@microsoft.com> Drivers:hv: Fix a bug in vmbus_driver_unregister() The function vmbus_exists() was introduced recently to deal with cases where the vmbus driver failed to initialize and yet other Hyper-V drivers attempted to register with the vmbus bus driver. This patch introduced a bug where vmbus_driver_unregister() would fail to unregister the driver. This patch fixes the problem. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Fuzhou Chen <fuzhouch@microsoft.com> Cc: Sasha Levin <levinsasha928@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
Completed in 1722 milliseconds