#
331722 |
|
29-Mar-2018 |
eadler |
Revert r330897:
This was intended to be a non-functional change. It wasn't. The commit message was thus wrong. In addition it broke arm, and merged crypto related code.
Revert with prejudice.
This revert skips files touched in r316370 since that commit was since MFCed. This revert also skips files that require $FreeBSD$ property changes.
Thank you to those who helped me get out of this mess including but not limited to gonzo, kevans, rgrimes.
Requested by: gjb (re)
|
#
331643 |
|
27-Mar-2018 |
dim |
MFC r314568 (by emaste):
kern_sig.c: ANSIfy and remove archaic register keyword
Sponsored by: The FreeBSD Foundation
MFC r318389 (by emaste):
Remove register keyword from sys/ and ANSIfy prototypes
A long long time ago the register keyword told the compiler to store the corresponding variable in a CPU register, but it is not relevant for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D10193
|
#
330897 |
|
14-Mar-2018 |
eadler |
Partial merge of the SPDX changes
These changes are incomplete but are making it difficult to determine what other changes can/should be merged.
No objections from: pfg
|
#
302408 |
|
07-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
276750 |
|
06-Jan-2015 |
rwatson |
In order to reduce use of M_EXT outside of the mbuf allocator and socket-buffer implementations, introduce a return value for MCLGET() (and m_cljget() that underlies it) to allow the caller to avoid testing M_EXT itself. Update all callers to use the return value.
With this change, very few network device drivers remain aware of M_EXT; the primary exceptions lie in mbuf-chain pretty printers for debugging, and in a few cases, custom mbuf and cluster allocation implementations.
NB: This is a difficult-to-test change as it touches many drivers for which I don't have physical devices. Instead we've gone for intensive review, but further post-commit review would definitely be appreciated to spot errors where changes could not easily be made mechanically, but were largely mechanical in nature.
Differential Revision: https://reviews.freebsd.org/D1440 Reviewed by: adrian, bz, gnn Sponsored by: EMC / Isilon Storage Division
|
#
271827 |
|
18-Sep-2014 |
glebius |
Mechanically convert to if_inc_counter().
|
#
266270 |
|
16-May-2014 |
brueffer |
Remove some unused variables.
Found with: Clang Static Analyzer MFC after: 2 weeks
|
#
260042 |
|
29-Dec-2013 |
dim |
Remove superfluous old-style rcsid[] from if_my.c. There is already an __FBSDID() at the top of the file.
MFC after: 3 days
|
#
257176 |
|
26-Oct-2013 |
glebius |
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
#
246128 |
|
30-Jan-2013 |
sbz |
Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays
Reviewed by: cognet Approved by: cognet
|
#
243857 |
|
04-Dec-2012 |
glebius |
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags in sys/dev.
|
#
229767 |
|
07-Jan-2012 |
kevlo |
ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by: yongari
|
#
223624 |
|
28-Jun-2011 |
kevlo |
Remove duplicate header includes
|
#
207554 |
|
03-May-2010 |
sobomax |
Add new tunable 'net.link.ifqmaxlen' to set default send interface queue length. The default value for this parameter is 50, which is quite low for many of today's uses and the only way to modify this parameter right now is to edit if_var.h file. Also add read-only sysctl with the same name, so that it's possible to retrieve the current value.
MFC after: 1 month
|
#
199540 |
|
19-Nov-2009 |
jhb |
- This driver used the if_watchdog timer both as a watchdog on transmit and auto-negotiation. To make this simpler and easier to understand I have split this out into two separate timers. One just manages the auto-neg side of things and one is a transmit watchdog. Neither uses if_watchdog. - Call ether_ifdetach() at the start of detach.
|
#
195049 |
|
26-Jun-2009 |
rwatson |
Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/ IF_ADDR_UNLOCK() across network device drivers when accessing the per-interface multicast address list, if_multiaddrs. This will allow us to change the locking strategy without affecting our driver programming interface or binary interface.
For two wireless drivers, remove unnecessary locking, since they don't actually access the multicast address list.
Approved by: re (kib) MFC after: 6 weeks
|
#
190325 |
|
23-Mar-2009 |
jhb |
Release driver lock at the end of the watchdog routine instead of trying to acquire it again.
Submitted by: bland MFC after: 3 days
|
#
188172 |
|
05-Feb-2009 |
imp |
Shutdown returns an int.
|
#
172568 |
|
12-Oct-2007 |
kevlo |
Spelling fix for interupt -> interrupt
|
#
167453 |
|
11-Mar-2007 |
brueffer |
my(4) doesn't need miibus(4).
Approved by: rwatson (mentor) Obtained from: DragonFly MFC after: 1 week
|
#
166901 |
|
23-Feb-2007 |
piso |
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr()
o add an int return code to all fast handlers
o retire INTR_FAST/IH_FAST
For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current
Reviewed by: many Approved by: re@
|
#
165640 |
|
29-Dec-2006 |
jhb |
Fix fat-fingering in previous commit.
Pointy hat to: jhb
|
#
165632 |
|
29-Dec-2006 |
jhb |
Various bpf(4) related fixes to catch places up to the new bpf(4) semantics. - Stop testing bpf pointers for NULL. In some cases use bpf_peers_present() and then call the function directly inside the conditional block instead of the macro. - For places where the entire conditional block is the macro, remove the test and make the macro unconditional. - Use BPF_MTAP() in if_pfsync on FreeBSD instead of an expanded version of the old semantics.
Reviewed by: csjp (older version)
|
#
162321 |
|
15-Sep-2006 |
glebius |
- Consistently use if_printf() only in interface methods: if_start(), if_watchdog, etc., or in functions used only in these methods. In all other functions in the driver use device_printf(). - Use __func__ instead of typing function name.
Submitted by: Alex Lyashkov <umka sevcity.net>
|
#
159291 |
|
05-Jun-2006 |
brueffer |
Add altq(4) support.
Reviewed by: mlaier Approved by: rwatson (mentor) MFC after: 2 weeks
|
#
158651 |
|
16-May-2006 |
phk |
Since DELAY() was moved, most <machine/clock.h> #includes have been unnecessary.
|
#
153084 |
|
04-Dec-2005 |
ru |
Fix -Wundef from compiling the amd64 LINT.
|
#
152315 |
|
11-Nov-2005 |
ru |
- Store pointer to the link-level address right in "struct ifnet" rather than in ifindex_table[]; all (except one) accesses are through ifp anyway. IF_LLADDR() works faster, and all (except one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom", and drop the IFP2ENADDR() macro; all users have been converted to use IF_LLADDR() instead.
|
#
149151 |
|
16-Aug-2005 |
jhb |
Fixup locking in if_my(4) and mark it MPSAFE: - Add locked variants of my_start() and my_init(). - Assert that the lock is held in several places rather than recursing. - Overhaul failure case handling in my_attach() so that it will actually clean up completely in each of the failure cases. - Setup the interrupt after ether_ifattach() in my_attach(). - Remove unused callout handle from softc. - Free the metadata for the descriptors my_in detach() (we leaked it before). - Fix locking in my_ioctl(). - Remove spls.
Tested by: brueffer MFC after: 3 days
|
#
148946 |
|
10-Aug-2005 |
jhb |
- Remove pre-new-bus code under #if 0 and some other rotted code under #if 0. - Use pci_enable_busmaster() to enable busmastering instead of frobbing the command register directly. - Don't check to see if memory or I/O can be enabled by writing to the command register. The PCI bus driver's bus_alloc_resource() method already checks this and will fail if it can't enable the bit.
|
#
148945 |
|
10-Aug-2005 |
jhb |
- Use if_printf() and device_printf() instead of outputting my%d: everywhere. This means that my_unit is no longer used as well. The watchdog routine now also prints 'my0: ...' rather than 'm0x0: ...'. - Don't bzero the softc and don't try to free it in detach or if attach fails. - A whitespace fix.
|
#
148887 |
|
09-Aug-2005 |
rwatson |
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to ifnet.if_drv_flags. Device drivers are now responsible for synchronizing access to these flags, as they are in if_drv_flags. This helps prevent races between the network stack and device driver in maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued; some less so.
Reviewed by: pjd, bz MFC after: 7 days
|
#
148654 |
|
02-Aug-2005 |
rwatson |
Modify device drivers supporting multicast addresses to lock if_addr_mtx over iteration of their multicast address lists when synchronizing the hardware address filter with the network stack-maintained list.
Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca> MFC after: 1 week
|
#
147256 |
|
10-Jun-2005 |
brooks |
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go.
Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
|
#
146734 |
|
29-May-2005 |
nyan |
Remove bus_{mem,p}io.h and related code for a micro-optimization on i386 and amd64. The optimization is a trivial on recent machines.
Reviewed by: -arch (imp, marcel, dfr)
|
#
143158 |
|
05-Mar-2005 |
imp |
Use BUS_PROBE_DEFAULT for pci probe return value
|
#
130270 |
|
09-Jun-2004 |
naddy |
Replace handrolled CRC calculation with ether_crc32_[lb]e().
|
#
129616 |
|
23-May-2004 |
mux |
We don't need to initialize if_output, ether_ifattach() does it for us.
|
#
127135 |
|
17-Mar-2004 |
njl |
Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
|
#
126966 |
|
14-Mar-2004 |
mdodd |
Announce ethernet MAC addresss in ether_ifattach().
|
#
123289 |
|
08-Dec-2003 |
obrien |
Don't use caddr_t in mchash(). Also use C99 spellings over BSD ones.
Requested by: bde,imp
|
#
122689 |
|
14-Nov-2003 |
sam |
Drop the driver lock around calls to if_input to avoid a LOR when the packets are immediately returned for sending (e.g. when bridging or packet forwarding). There are more efficient ways to do this but for now use the least intrusive approach.
Reviewed by: imp, rwatson
|
#
122625 |
|
13-Nov-2003 |
obrien |
Try to create some sort of consistency in how the routings to find the multicast hash are written. There are still two distinct algorithms used, and there actually isn't any reason each driver should have its own copy of this function as they could all share one copy of it (if it grew an additional argument).
|
#
121816 |
|
31-Oct-2003 |
brooks |
Replace the if_name and if_unit members of struct ifnet with new members if_xname, if_dname, and if_dunit. if_xname is the name of the interface and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo device creation and configuration symantics.
Approved By: re (in principle) Reviewed By: njl, imp Tested On: i386, amd64, sparc64 Obtained From: NetBSD (if_xname)
|
#
119418 |
|
24-Aug-2003 |
obrien |
Use __FBSDID(). Also some minor style cleanups.
|
#
119285 |
|
22-Aug-2003 |
imp |
Prefer new location of pci include files (which have only been in the tree for two or more years now), except in a few places where there's code to be compatible with older versions of FreeBSD.
|
#
113506 |
|
15-Apr-2003 |
mdodd |
- Express hard dependencies on bus (pci, isa, pccard) and network layer (ether). - Don't abuse module names to facilitate ifconfig module loading; such abuse isn't really needed. (And if we do need type information associated with a module then we should make it explicit and not use hacks.)
|
#
113038 |
|
03-Apr-2003 |
obrien |
Use __FBSDID rather than rcsid[].
|
#
111119 |
|
19-Feb-2003 |
imp |
Back out M_* changes, per decision of the TRB.
Approved by: trb
|
#
109623 |
|
21-Jan-2003 |
alfred |
Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0. Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
|
#
106937 |
|
14-Nov-2002 |
sam |
network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets up the stack intact (required significant changes to some drivers) o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN) o track ether_ifattach/ether_ifdetach API changes o track bpf changes (use BPF_TAP and BPF_MTAP) o track vlan changes (ifnet capabilities, revised processing scheme, etc.) o use if_input to pass packets "up" o call ether_ioctl for default handling of ioctls
Reviewed by: many Approved by: re
|
#
106696 |
|
09-Nov-2002 |
alfred |
Fix instances of macros with improperly parenthasized arguments.
Verified by: md5
|
#
106588 |
|
07-Nov-2002 |
jhb |
Cast a pointer to a uintptr_t instead of a u_int.
|
#
97641 |
|
30-May-2002 |
julian |
Add missing unlock Submitted by: dirkx@covalent.net
|
#
95939 |
|
02-May-2002 |
julian |
Add missing UNLOCKs
Submitted by: dirkx@covalent.net
|
#
95807 |
|
30-Apr-2002 |
julian |
Need more includes.
|
#
95803 |
|
30-Apr-2002 |
julian |
Add the extra argument to mtx_init()
|
#
95673 |
|
28-Apr-2002 |
phk |
Follow NetBSD and s/IFM_1000_TX/IFM_1000_T/
|
#
94905 |
|
16-Apr-2002 |
julian |
diff reduction
|
#
94904 |
|
16-Apr-2002 |
julian |
Slight diff-reduction to -stable.
|
#
94863 |
|
16-Apr-2002 |
julian |
Diff reduction to 4.x version.
|
#
93746 |
|
04-Apr-2002 |
julian |
Add the driver for "myson" ethernet cards. This driver was written by Myson and is made available by their courtesy. The 5.x version is not fully tested (I will be testing) but the 4.x version has been tested by many. I will commit it soon. Myson have their own chip design based on the DEC 214xx family but with several differences. Myson sells this chip to several EOMs in teh Chinese area so there may be many noname brand cards that respond to this driver. Myson will be supplying a list of some of these.
|