Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r320481:

Store a 32-bit PT_LWPINFO struct for 32-bit process core dumps.

MFC r306081:
Add PROC_TRAPCAP procctl(2) controls and global sysctl kern.trap_enocap.

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Improve POSIX conformance of <signal.h>.

- This header file has always depended on pthread_t, pthread_attr_t,
struct timespec, size_t and uid_t. Only as of POSIX 2008, these
dependencies have been states explicitly. They should now be defined.

- In our implementation, struct sigevent::sigev_notify_attributes has
type "void *" instead of "pthread_attr_t *". My guess is that this was
done to prevent pulling in the pthread types, but this can easily be
avoided by using the underlying structure types.

POSIX states that #include <signal.h> shall make both mcontext_t and
ucontext_t available. Our code even has XXX comment about this.

Add a bit of compliance by moving struct __ucontext definition into
sys/_ucontext.h and including it into signal.h and sys/ucontext.h.

Several machine/ucontext.h headers were changed to use namespace-safe
types (like uint64_t->__uint64_t) to not depend on sys/types.h.
struct __stack_t from sys/signal.h is made always visible in private
namespace to satisfy sys/_ucontext.h requirements.

Apparently mips _types.h pollutes global namespace with f_register_t
type definition. This commit does not try to fix the issue.

PR: 207079
Reported and tested by: Ting-Wei Lan <lantw44@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks

Convert ss_sp in stack_t and sigstack to void *.

POSIX requires these members to be of type void * rather than the
char * inherited from 4BSD. NetBSD and OpenBSD both changed their
fields to void * back in 1998. No new build failures were reported
via an exp-run.

PR: 206503 (exp-run)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5092

Register signal 33 explicitly as reserved by real-time library, and
use it by its new name (SIGLIBRT) rather than internal definition
in librt (SIGSERVICE).

Approved by: davidxu, arch

If multiple threads call kevent() to get AIO events on same kqueue fd,
it is possible that a single AIO event will be reported to multiple
threads, it is not threading friendly, and the existing API can not
control this behavior.
Allocate a kevent flags field sigev_notify_kevent_flags for AIO event
notification in sigevent, and allow user to pass EV_CLEAR, EV_DISPATCH
or EV_ONESHOT to AIO kernel code, user can control whether the event
should be cleared once it is retrieved by a thread. This change should
be comptaible with existing application, because the field should have
already been zero-filled, and no additional action will be taken by
kernel.

PR: kern/156567

Make POLL_ERR and POLL_HUP different.

The kernel currently does not generate any of the POLL_* constants, but
some applications use them and break if they are not all distinct.

PR: kern/126076
MFC after: 1 week

Add a trap code for DTrace induced traps.

Sponsored by: The FreeBSD Foundation

- According to specification, SI_USER code should only be generated by
standard kill(). On other systems, SI_LWP is generated by lwp_kill().
This will allow conforming applications to differentiate between
signals generated by standard events and those generated by other
implementation events in a manner compatible with existing practice.
- Bump __FreeBSD_version

Remove spurious '/*-' marks and fix some other style problems.

Submitted by: bde@

Revert r210225 - turns out I was wrong; the "/*-" is not license-only
thing; it's also used to indicate that the comment should not be automatically
rewrapped.

Explained by: cperciva@

The "/*-" comment marker is supposed to denote copyrights. Remove non-copyright
occurences from sys/sys/ and sys/kern/.

Implement sighold, sigignore, sigpause, sigrelse, sigset functions
from SUSv4 XSI. Note that the functions are obsoleted, and only
provided to ease porting from System V-like systems. Since sigpause
already exists in compat with different interface, XSI sigpause is
named xsi_sigpause.

Reviewed by: davidxu
MFC after: 3 weeks

Among signal generation syscalls, only sigqueue(2) is allowed by POSIX
to fail due to lack of resources to queue siginfo. Add KSI_SIGQ flag
that allows sigqueue_add() to fail while trying to allocate memory for
new siginfo. When the flag is not set, behaviour is the same as for
KSI_TRAP: if memory cannot be allocated, set bit in sq_kill. KSI_TRAP is
kept to preserve KBI.

Add SI_KERNEL si_code, to be used in siginfo.si_code when signal is
generated by kernel. Deliver siginfo when signal is generated by kill(2)
family of syscalls (SI_USER with properly filled si_uid and si_pid), or
by kernel (SI_KERNEL, mostly job control or SIGIO). Since KSI_SIGQ flag
is not set for the ksi, low memory condition cause old behaviour.

Keep psignal(9) KBI intact, but modify it to generate SI_KERNEL
si_code. Pgsignal(9) and gsignal(9) now take ksi explicitely. Add
pksignal(9) that behaves like psignal but takes ksi, and ddb kill
command implemented as pksignal(..., ksi = NULL) to not do allocation
while in debugger.

While there, remove some register specifiers and use ANSI C prototypes.

Reviewed by: davidxu
MFC after: 1 month

Correct the visibility macro surrounding SIGSYS.

Submitted by: Andriy Gapon <avg@icyb.net.ua>

Restore member fields sigval_int and sigval_ptr, this unbreaks compilation
of some old programs. Since sigval is union type, this change will not have
binary compatibility problem.

MFC: after 3 days
Discussed with: rwatson, glebius

Remove various bits of conditional Alpha code and fixup a few comments.

o Remove SI_KERNEL until I really implemented it.
o Add definition SI_NOINFO for zero si_code.

o Add some pad fields into struct sigevent for future extension.
(suggested by alfred@)
o Reuse si_band field in struct __siginfo, add a mqd member which will
be used by mqueue.
o Add code SI_KERNEL to indicate a signal is queued by kernel.

Avoid using signal 127 and 128 as RT signals, these two signals confuse
wait4 interfaces, see PR: kern/19402.

Define SIGLWP which is an alias for SIGTHR, the reason why I did this
is that gdb knows SIGLWP and will pass it to program, otherwise gdb
will print out "unknown signal" and discard it, and then thread
cancellation won't work for libthr under gdb.

MFC: 3 days

Fix name compatible problem with POSIX standard. the sigval_ptr and
sigval_int really should be sival_ptr and sival_int.
Also sigev_notify_function accepts a union sigval value but not a
pointer.

Update SIGTHR's comment.

Fix sigevent's POSIX incompatible problem by adding member fields
sigev_notify_function and sigev_notify_attributes. AIO syscalls
use sigevent, so they have to be adjusted.

Reviewed by: alc

Add member fields for POSIX timer.

Add POSIX siginfo_t's si_code, this is for upcoming POSIX realtime signal
support in kernel.

Earlier patch reviewed by: jhb, deischen

Move MINSIGSTKSZ from <machine/signal.h> to <machine/_limits.h> and rename
it to __MINSIGSTKSZ. Define MINSIGSTKSZ in <sys/signal.h>.

This is done in order to use MINSIGSTKSZ for the macro PTHREAD_STACK_MIN
in <pthread.h> (soon <limits.h>) without having to include the whole
<sys/signal.h> header.

Discussed with: bde

Make this look less dubious :-)

Spotted by: ru

Deorbit COMPAT_SUNOS.

We inherited this from the sparc32 port of BSD4.4-Lite1. We have neither
a sparc32 port nor a SunOS4.x compatibility desire these days.

Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core

- According to mike@FreeBSD.org SIGTHR should be hiden by
#ifdef __BSD_VISIBLE

- Add a signal for thread synchronization. Add an XXX so that maybe
someone more knowledgeable on standards defined namespaces may ifdef
this out.

Fix drift of the comment about sa_sigaction away from its code.
Fix English in this comment.

Submitted by: bde

sa_handler is in the POSIX namespace (5.0-R candidate).

Remove the <sys/types.h> prerequisite for <ucontext.h> by including
<sys/_types.h> in <sys/signal.h>.

Approved by: re

Split 4.x and 5.x signal handling so that we can keep 4.x signal
handling clean and functional as 5.x evolves. This allows some of the
nasty bandaids in the 5.x codepaths to be unwound.

Encapsulate 4.x signal handling under COMPAT_FREEBSD4 (there is an
anti-foot-shooting measure in place, 5.x folks need this for a while) and
finish encapsulating the older stuff under COMPAT_43. Since the ancient
stuff is required on alpha (longjmp(3) passes a 'struct osigcontext *'
to the current sigreturn(2), instead of the 'ucontext_t *' that sigreturn
is supposed to take), add a compile time check to prevent foot shooting
there too. Add uniform COMPAT_43 stubs for ia64/sparc64/powerpc.

Tested on: i386, alpha, ia64. Compiled on sparc64 (a few days ago).
Approved by: re

style(9)

Submitted by: bde (partially)

1) Although C99 allows implementations to define additional SIG*
constants in scope, C90 does not; so, add namespace visibility
conditionals to SIG*.
2) Define the extended __sighandler_t type only in BSD namespace.
3) Don't forward declare a struct for a prototype in <signal.h>.
4) Move location of SIG_* constants.
5) Move a forward declare into the correct namespace conditional.

Requested by: bde (1)
Submitted by: bde (2 thru 5)

o Fix a silly requirement for <machine/signal.h> to be included in the
middle of this header.
o Remove unneeded conditionals to hide SIG* in the POSIX case.
(C allows implementations to define additional SIG* constants.)
o Add comments about missing features.
o Move the location of the sigset_t typedef.
o Update standards visibility conditionals.
o Fix some assumptions about what pid_t and uid_t are defined as.
o Remove size_t typedef and use __size_t in struct sigaltstack
instead.

Change <sys/_sigset.h> to typedef __sigset_t instead of sigset_t, so
that headers that include it can conditionalize sigset_t's visibility.

o Merge <machine/ansi.h> and <machine/types.h> into a new header
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif

Concept by: bde
Reviewed by: jake, obrien

Use <sys/_sigset.h> to get declaration of sigset_t, which has been moved
to a separate header to facilitate its declaration in more than one
place. Namespace issues not fixed.

Remove __P

Use struct __ucontext in prototypes and associated functions instead of
ucontext_t. Forward declare struct __ucontext in <sys/signal.h> and
remove reliance on <sys/ucontext.h> being included.

While I'm here, also hide osigcontext types from userland; suggested
by bde.

Namespace pollution noticed by: Kevin Day <toasty@shell.dragondata.com>

_SIG_MAXSIG (128) is the highest legal signal. The arrays are offset
by one - see _SIG_IDX(). Revert part of my mis-correction in kern_sig.c
(but signal 0 still has to be allowed) and fix _SIG_VALID() (it was
rejecting ignal 128).

style(9) the structure definitions.

Check validity of signal callback requested via aio routines.

Also move the insertion of the request to after the request is validated,
there's still looks like there may be some problems if an invalid address
is passed to the aio routines, basically a possible leak or having a
not completely initialized structure on the queue may still be possible.

A new sig macro was made _SIG_VALID to check the validity of a signal,
it would be advisable to use it from now on (in kern/kern_sig.c) rather
than rolling your own.

PR: kern/17152

Provide a new interface for the user of aio_read() and aio_write() to request
a kevent upon completion of the I/O. Specifically, introduce a new type
of sigevent notification, SIGEV_EVENT. If sigev_notify is SIGEV_EVENT,
then sigev_notify_kqueue names the kqueue that should receive the event
and sigev_value contains the "void *" is copied into the kevent's udata
field.

In contrast to the existing interface, this one: 1) works on
the Alpha 2) avoids the extra copyin() call for the kevent because all
of the information needed is in the sigevent and 3) could be
applied to request a single kevent upon completion of an entire lio_listio().

Reviewed by: jlemon

Make MINSIGSTKSZ machine dependent, and have the sigaltstack
syscall compare against a variable sv_minsigstksz in struct
sysentvec as to properly take the size of the machine- and
ABI dependent struct sigframe into account.

The SVR4 and iBCS2 modules continue to have a minsigstksz of
8192 to preserve behavior. The real values (if different) are
not known at this time. Other ABI modules use the real
values.

The native MINSIGSTKSZ is now defined as follows:

Arch MINSIGSTKSZ
---- -----------
alpha 4096
i386 2048
ia64 12288

Reviewed by: mjacob
Suggested by: bde

Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.

Properly fix building posix sources this time.

Reported by: markm

Move SIG_HOLD back to signalvar.h.

Fix style bugs and comments while I'm here.

Submitted by: bde

I don't know if this is the correct fix, but my kernel can compile with it.

Use the proper #ifdef around union sigval and siginfo_t. This fixes
the breakage of POSIX sources (such as XFree86).

Reviewed by: bde

Re-introduction of sigcontext.

struct sigcontext and ucontext_t/mcontext_t are defined in such
a way that both (ie struct sigcontext and ucontext_t) can be
passed on to sigreturn. The signal handler is still given a
ucontext_t for maximum flexibility.

For backward compatibility sigreturn restores the state for the
alternate signal stack from sigcontext.sc_onstack and not from
ucontext_t.uc_stack. A good way to determine which value the
application has set and thus which value to use, is still open
for discussion.

NOTE: This change should only affect those binaries that use
sigcontext and/or ucontext_t. In the source tree itself
this is only doscmd. Recompilation is required for those
applications.

This commit also fixes a lot of style bugs without hopefully
adding new ones.

NOTE: struct sigaltstack.ss_size now has type size_t again. For
some reason I changed that into unsigned int.

Parts submitted by: bde
sigaltstack bug found by: bde

sigset_t change (part 2 of 5)
-----------------------------

The core of the signalling code has been rewritten to operate
on the new sigset_t. No methodological changes have been made.
Most references to a sigset_t object are through macros (see
signalvar.h) to create a level of abstraction and to provide
a basis for further improvements.

The NSIG constant has not been changed to reflect the maximum
number of signals possible. The reason is that it breaks
programs (especially shells) which assume that all signals
have a non-null name in sys_signame. See src/bin/sh/trap.c
for an example. Instead _SIG_MAXSIG has been introduced to
hold the maximum signal possible with the new sigset_t.

struct sigprop has been moved from signalvar.h to kern_sig.c
because a) it is only used there, and b) access must be done
though function sigprop(). The latter because the table doesn't
holds properties for all signals, but only for the first NSIG
signals.

signal.h has been reorganized to make reading easier and to
add the new and/or modified structures. The "old" structures
are moved to signalvar.h to prevent namespace polution.

Especially the coda filesystem suffers from the change, because
it contained lines like (p->p_sigmask == SIGIO), which is easy
to do for integral types, but not for compound types.

NOTE: kdump (and port linux_kdump) must be recompiled.

Thanks to Garrett Wollman and Daniel Eischen for pressing the
importance of changing sigreturn as well.

$Id$ -> $FreeBSD$

Implement SA_SIGINFO for i386. Thanks to Bruce Evans for much more
than a review, this was a nice puzzle.

This is supposed to be binary and source compatible with older
applications that access the old FreeBSD-style three arguments to a
signal handler.

Except those applications that access hidden signal handler arguments
bejond the documented third one. If you have applications that do,
please let me know so that we take the opportunity to provide the
functionality they need in a documented manner.

Also except application that use 'struct sigframe' directly. You need
to recompile gdb and doscmd. `make world` is recommended.

Example program that demonstrates how SA_SIGINFO and old-style FreeBSD
handlers (with their three args) may be used in the same process is at
http://www3.cons.org/tmp/fbsd-siginfo.c

Programs that use the old FreeBSD-style three arguments are easy to
change to SA_SIGINFO (although they don't need to, since the old style
will still work):

Old args to signal handler:
void handler_sn(int sig, int code, struct sigcontext *scp)

New args:
void handler_si(int sig, siginfo_t *si, void *third)
where:
old:code == new:second->si_code
old:scp == &(new:si->si_scp) /* Passed by value! */

The latter is also pointed to by new:third, but accessing via
si->si_scp is preferred because it is type-save.

FreeBSD implementation notes:
- This is just the framework to make the interface POSIX compatible.
For now, no additional functionality is provided. This is supposed
to happen now, starting with floating point values.
- We don't use 'sigcontext_t.si_value' for now (POSIX meant it for
realtime-related values).
- Documentation will be updated when new functionality is added and
the exact arguments passed are determined. The comments in
sys/signal.h are meant to be useful.

Reviewed by: BDE

Define ss_size in struct sigaltstack as size_t instead of int.

Finish _POSIX_PRIORITY_SCHEDULING. Needs P1003_1B and
_KPOSIX_PRIORITY_SCHEDULING options to work. Changes:

Change all "posix4" to "p1003_1b". Misnamed files are left
as "posix4" until I'm told if I can simply delete them and add
new ones;

Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux;

Add man pages for _POSIX_PRIORITY_SCHEDULING system calls;

Add options to LINT;

Minor fixes to P1003_1B code during testing.

Implement SA_NOCLDWAIT.

The implementation is done (unlike what i've originally been
contemplating) by reparenting kids of processes that have the
appropriate bit set to PID 1, and let PID 1 handle the zombie. This
is far less problematical than what would seem to be ``doing it
right'', for a number of reasons.

Of our currently shipping PID-1-intended programs, 50 % fail the above
assumption. ;-) (Read this: sysinstall doesn't do it right. This is
no problem as long as no program called by sysinstall actually uses
SA_NOCLDWAIT.)

ToDo: . clarify the correct SA_* flag inheritance, compared
to other systems,
. decide whether the compat cruft (osigvec(9)) should
deal with new system additions or not,
. merge OpenBSD's SA_SIGINFO implementation. ;)
Reviewed by: bde

Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Add a SV_NODEFER and SV_RESETHAND #define, after Bruce pointed out that
a program that was saving and restoring a signal via sigvec() was not
doing the complete job if either of these bits had been set via sigaction.

Merge in Lite2: no changes necessary. Just update CSRG id.
Reviewed by: davidg & bde

Mega-commit for Linux emulator update.. This has been stress tested under
netscape-2.0 for Linux running all the Java stuff. The scrollbars are now
working, at least on my machine. (whew! :-)

I'm uncomfortable with the size of this commit, but it's too
inter-dependant to easily seperate out.

The main changes:

COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386
machine dependent section into the linux emulator itself. The int 0x80
syscall code was almost identical to the lcall 7,0 code and a minor tweak
allows them to both be used with the same C code. All kernels can now
just modload the lkm and it'll DTRT without having to rebuild the kernel
first. Like IBCS2, you can statically compile it in with "options LINUX".

A pile of new syscalls implemented, including getdents(), llseek(),
readv(), writev(), msync(), personality(). The Linux-ELF libraries want
to use some of these.

linux_select() now obeys Linux semantics, ie: returns the time remaining
of the timeout value rather than leaving it the original value.

Quite a few bugs removed, including incorrect arguments being used in
syscalls.. eg: mixups between passing the sigset as an int, vs passing
it as a pointer and doing a copyin(), missing return values, unhandled
cases, SIOC* ioctls, etc.

The build for the code has changed. i386/conf/files now knows how
to build linux_genassym and generate linux_assym.h on the fly.

Supporting changes elsewhere in the kernel:

The user-mode signal trampoline has moved from the U area to immediately
below the top of the stack (below PS_STRINGS). This allows the different
binary emulations to have their own signal trampoline code (which gets rid
of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so
that the emulator can provide the exact "struct sigcontext *" argument to
the program's signal handlers.

The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which
have the same values as the re-used SA_DISABLE and SA_ONSTACK which are
intended for sigaction only. This enables the support of a SA_RESETHAND
flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal
semantics where the signal handler is reset when it's triggered.

makesyscalls.sh no longer appends the struct sysentvec on the end of the
generated init_sysent.c code. It's a lot saner to have it in a seperate
file rather than trying to update the structure inside the awk script. :-)

At exec time, the dozen bytes or so of signal trampoline code are copied
to the top of the user's stack, rather than obtaining the trampoline code
the old way by getting a clone of the parent's user area. This allows
Linux and native binaries to freely exec each other without getting
trampolines mixed up.

Changed the description of SIGSYS to better reflect what
it means when that signal is received. Closes PR# 686.

Implement SA_NODEFER sa_flag for sigaction():
Add SA_NODEFER define to signal.h
Add ps_nodefer field to struct sigacts in signalvar.h.
Add code to kern_sig.c to handle SA_NODEFER.

If flag is set, when the signal is delivered, it is not masked automatically
from receiving the same signal again.

Reviewed by: wollman, bde

Fix standards conformance bugs in <signal.h>:

include/signal.h:
There was massive namespace pollution from including <sys/types.h>.
POSIX functions were declared even when _ANSI_SOURCE is defined.

sys.sys/signal.h:
NSIG was declared even if _ANSI_SOURCE or _POSIX_SOURCE is defined.
sig_atomic_t wasn't declared if _POSIX_SOURCE is defined.
Declare a typedef for signal handling functions and use it to
unobfuscate declarations and to avoid half-baked function types
that cause unwanted compiler warnings at certain warning levels.
Fix confusing comment about SA_RESTART.

sys/i386/include/signal.h:
This has to be included to get the declaration of sig_atomic_t even
when _ANSI_SOURCE is defined, so be more careful about polluting
the ANSI namespace.

Uniformize idempotency ifdefs.

Correct a name of one structure member in the sigaltstack structure.
Now it matches the man page and also the only other commercial implementation
i have found so far ( Solaris 2.x).
Changed the name from ss_base to ss_sp.

Added $Id$

This commit was generated by cvs2svn to compensate for changes in r1541,
which included commits to RCS files with non-trunk default branches.

BSD 4.4 Lite Kernel Sources