fix i386 breakage caused by r339767

Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Use single instance of the identical INKERNEL() and PMC_IN_KERNEL()
macros on amd64 and i386. Move the definition to machine/param.h.
kgdb defines INKERNEL() too, the conflict is resolved by renaming kgdb
version to PINKERNEL().

On i386, correct the lowest kernel address. After the shared page was
introduced, USRSTACK no longer points to the last user address + 1 [*]

Submitted by: Oliver Pinter [*]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week

Add software PMC support.

New kernel events can be added at various location for sampling or counting.
This will for example allow easy system profiling whatever the processor is
with known tools like pmcstat(8).

Simultaneous usage of software PMC and hardware PMC is possible, for example
looking at the lock acquire failure, page fault while sampling on
instructions.

Sponsored by: NETASQ
MFC after: 1 month

- Support for uncore counting events: one fixed PMC with the uncore
domain clock, 8 programmable PMC.
- Westmere based CPU (Xeon 5600, Corei7 980X) support.
- New man pages with events list for core and uncore.
- Updated Corei7 events with Intel 253669-033US December 2009 doc.
There is some removed events in the documentation, they have been
kept in the code but documented in the man page as obsolete.
- Offcore response events can be setup with rsp token.

Sponsored by: NETASQ

Adjust the handling of the local APIC PMC interrupt vector:
- Provide lapic_disable_pmc(), lapic_enable_pmc(), and lapic_reenable_pmc()
routines in the local APIC code that the hwpmc(4) driver can use to
manage the local APIC PMC interrupt vector.
- Do not enable the local APIC PMC interrupt vector by default when
HWPMC_HOOKS is enabled. Instead, the hwpmc(4) driver explicitly
enables the interrupt when it is succesfully initialized and disables
the interrupt when it is unloaded. This avoids enabling the interrupt
on unsupported CPUs which may result in spurious NMIs.

Reported by: rnoland
Reviewed by: jkoshy
Approved by: re (kib)
MFC after: 2 weeks

- Add support for PMCs in Intel CPUs of Family 6, model 0xE (Core Solo
and Core Duo), models 0xF (Core2), model 0x17 (Core2Extreme) and
model 0x1C (Atom).

In these CPUs, the actual numbers, kinds and widths of PMCs present
need to queried at run time. Support for specific "architectural"
events also needs to be queried at run time.

Model 0xE CPUs support programmable PMCs, subsequent CPUs
additionally support "fixed-function" counters.

- Use event names that are close to vendor documentation, taking in
account that:
- events with identical semantics on two or more CPUs in this family
can have differing names in vendor documentation,
- identical vendor event names may map to differing events across
CPUs,
- each type of CPU supports a different subset of measurable
events.

Fixed-function and programmable counters both use the same vendor
names for events. The use of a class name prefix ("iaf-" or
"iap-" respectively) permits these to be distinguished.

- In libpmc, refactor pmc_name_of_event() into a public interface
and an internal helper function, for use by log handling code.

- Minor code tweaks: staticize a global, freshen a few comments.

Tested by: gnn

- Separate PMC class dependent code from other kinds of machine
dependencies. A 'struct pmc_classdep' structure describes operations
on PMCs; 'struct pmc_mdep' contains one or more 'struct pmc_classdep'
structures depending on the CPU in question.

Inside PMC class dependent code, row indices are relative to the
PMCs supported by the PMC class; MI code in "hwpmc_mod.c" translates
global row indices before invoking class dependent operations.

- Augment the OP_GETCPUINFO request with the number of PMCs present
in a PMC class.

- Move code common to Intel CPUs to file "hwpmc_intel.c".

- Move TSC handling to file "hwpmc_tsc.c".

Correct a callchain capture bug on the i386.

On the i386 architecture, the processor only saves the current value
of `%esp' on stack if a privilege switch is necessary when entering
the interrupt handler. Thus, `frame->tf_esp' is only valid for
an entry from user mode. For interrupts taken in kernel mode, we
need to determine the top-of-stack for the interrupted kernel
procedure by adding the appropriate offset to the current frame
pointer.

Reported by: kris, Fabien Thomas
Tested by: Fabien Thomas <fabien.thomas at netasq dot com>

Correct a copy-paste error---do not look for REX prefixes in i386 code.

Kernel and hwpmc(4) support for callchain capture.

Sponsored by: FreeBSD Foundation and Google Inc.

MFP4:

- Implement sampling modes and logging support in hwpmc(4).

- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.

- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).

- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.

- bug fixes & documentation.

Add convenience APIs pmc_width() and pmc_capabilities() to -lpmc.
Have pmcstat(8) and pmccontrol(8) use these APIs.

Return PMC class-related constants (PMC widths and capabilities)
with the OP GETCPUINFO call leaving OP PMCINFO to return only the
dynamic information associated with a PMC (i.e., whether enabled,
owner pid, reload count etc.).

Allow pmc_read() (i.e., OPS PMCRW) on active self-attached PMCs to
get upto-date values from hardware since we can guarantee that the
hardware is running the correct PMC at the time of the call.

Bug fixes:
- (x86 class processors) Fix a bug that prevented an RDPMC
instruction from being recognized as permitted till after the
attached process had context switched out and back in again after
a pmc_start() call.

Tighten the rules for using RDPMC class instructions: a GETMSR
OP is now allowed only after an OP ATTACH has been done by the
PMC's owner to itself. OP GETMSR is not allowed for PMCs that
track descendants, for PMCs attached to processes other than
their owner processes.

- (P4/HTT processors only) Fix a bug that caused the MI and MD
layers to get out of sync. Add a new MD operation 'get_config()'
as part of this fix.

- Allow multiple system-mode PMCs at the same row-index but on
different CPUs to be allocated.

- Reject allocation of an administratively disabled PMC.

Misc. code cleanups and refactoring. Improve a few comments.

Return the correct register number in the 'get_msr()' MD function.

Only allow a process to use the x86 RDPMC instruction if it has
allocated and attached a PMC to itself.

Inform the MD layer of the "pseudo context switch out" that needs
to be done when the last thread of a process is exiting.

o Reverse the inclusion chain from MD->MI to MI->MD by removing the
inclusion of <sys/pmc.h> and depending on being included from
that header file.
o Include any MD specific header files that otherwise need to be
included from MI files.

Ok'd: jkoshy@

Bring a working snapshot of hwpmc(4), its associated libraries, userland utilities
and documentation into -CURRENT.

Bump FreeBSD_version.

Reviewed by: alc, jhb (kernel changes)