/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/usb/storage/ |
H A D | sierra_ms.c | 49 US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n"); 67 US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n"); 85 US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev); 86 US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU); 87 US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer); 103 US_DEBUGP("SWIMS: Allocation failure\n"); 109 US_DEBUGP("SWIMS: failed SWoC query\n"); 143 US_DEBUGP("SWIMS: sierra_ms_init called\n"); 147 US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n"); 150 US_DEBUGP("SWIM [all...] |
H A D | debug.h | 53 #define US_DEBUGP(x...) printk( KERN_DEBUG USB_STORAGE x ) macro 57 #define US_DEBUGP(x...) macro
|
H A D | isd200.c | 510 US_DEBUGP(" isd200_action(READ_STATUS)\n"); 519 US_DEBUGP(" isd200_action(ENUM,0x%02x)\n",value); 529 US_DEBUGP(" isd200_action(RESET)\n"); 538 US_DEBUGP(" isd200_action(REENABLE)\n"); 547 US_DEBUGP(" isd200_action(SOFT_RESET)\n"); 556 US_DEBUGP(" isd200_action(IDENTIFY)\n"); 564 US_DEBUGP("Error: Undefined action %d\n",action); 574 US_DEBUGP(" isd200_action(0x%02x) error: %d\n",action,status); 596 US_DEBUGP("Entering isd200_IssueATAReadRegs\n"); 601 US_DEBUGP(" Erro [all...] |
H A D | initializers.c | 51 US_DEBUGP("Attempting to init eUSCSI bridge...\n"); 56 US_DEBUGP("-- result is %d\n", result); 71 US_DEBUGP("Sending UCR-61S2B initialization packet...\n"); 86 US_DEBUGP("Getting status packet...\n"); 104 US_DEBUGP("Huawei mode set result is %d\n", result);
|
H A D | freecom.c | 164 US_DEBUGP("Read data Freecom! (c=%d)\n", count); 170 US_DEBUGP ("Freecom readdata transport error\n"); 175 US_DEBUGP("Start of read\n"); 177 US_DEBUGP("freecom_readdata done!\n"); 197 US_DEBUGP("Write data Freecom! (c=%d)\n", count); 203 US_DEBUGP ("Freecom writedata transport error\n"); 208 US_DEBUGP("Start of write\n"); 211 US_DEBUGP("freecom_writedata done!\n"); 233 US_DEBUGP("Freecom TRANSPORT STARTED\n"); 255 US_DEBUGP ("freeco [all...] |
H A D | option_ms.c | 52 US_DEBUGP("Option MS: %s", "DEVICE MODE SWITCH\n"); 97 US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n"); 140 US_DEBUGP("Option MS: option_ms_init called\n"); 147 US_DEBUGP("Option MS: vendor is not Option or not determinable," 151 US_DEBUGP("Option MS: this is a genuine Option device," 156 US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n"); 159 US_DEBUGP("Option MS: Failed to switch to modem mode.\n"); 163 US_DEBUGP("Option MS: %s", "Allowing Mass Storage Mode if device"
|
H A D | transport.c | 168 US_DEBUGP("-- cancelling URB\n"); 180 US_DEBUGP("%s -- cancelling URB\n", 199 US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", 251 US_DEBUGP("%s: result = %d\n", __func__, result); 267 US_DEBUGP("Status code %d; transferred %u/%u\n", 274 US_DEBUGP("-- short transfer\n"); 278 US_DEBUGP("-- transfer complete\n"); 286 US_DEBUGP("-- stall on control pipe\n"); 291 US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe); 298 US_DEBUGP(" [all...] |
H A D | jumpshot.c | 121 US_DEBUGP("jumpshot_bulk_read: len = %d\n", len); 134 US_DEBUGP("jumpshot_bulk_write: len = %d\n", len); 155 US_DEBUGP("jumpshot_get_status: 0x%2x\n", 221 US_DEBUGP("jumpshot_read_data: %d bytes\n", len); 317 US_DEBUGP("jumpshot_write_data: Gah! Waitcount = 10. Bad write!?\n"); 352 US_DEBUGP("jumpshot_id_device: Gah! " 403 US_DEBUGP("jumpshot_handle_mode_sense: Current values\n"); 406 US_DEBUGP("jumpshot_handle_mode_sense: Changeable values\n"); 409 US_DEBUGP("jumpshot_handle_mode_sense: Default values\n"); 412 US_DEBUGP("jumpshot_handle_mode_sens [all...] |
H A D | datafab.c | 126 US_DEBUGP("datafab_bulk_read: len = %d\n", len); 137 US_DEBUGP("datafab_bulk_write: len = %d\n", len); 303 US_DEBUGP("datafab_write_data: Gah! " 345 US_DEBUGP("datafab_determine_lun: locating...\n"); 477 US_DEBUGP("datafab_handle_mode_sense: Current values\n"); 480 US_DEBUGP("datafab_handle_mode_sense: Changeable values\n"); 483 US_DEBUGP("datafab_handle_mode_sense: Default values\n"); 486 US_DEBUGP("datafab_handle_mode_sense: Saves values\n"); 570 US_DEBUGP("datafab_transport: Gah! " 581 US_DEBUGP("datafab_transpor [all...] |
H A D | usb.c | 142 US_DEBUGP("%s\n", __func__); 160 US_DEBUGP("%s\n", __func__); 173 US_DEBUGP("%s\n", __func__); 193 US_DEBUGP("%s\n", __func__); 205 US_DEBUGP("%s\n", __func__); 266 US_DEBUGP("*** thread sleeping.\n"); 270 US_DEBUGP("*** thread awakened.\n"); 282 US_DEBUGP("-- exiting\n"); 298 US_DEBUGP("UNKNOWN data direction\n"); 307 US_DEBUGP("Ba [all...] |
H A D | sddr09.c | 108 /* #define US_DEBUGP printk */ 406 US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", 415 US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", 477 US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n", 498 US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress); 511 US_DEBUGP("Result for send_control in sddr09_erase %d\n", 569 US_DEBUGP("Result for send_control in sddr09_writeX %d\n", 578 US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", 614 US_DEBUGP("Reading status...\n"); 676 US_DEBUGP("Erro [all...] |
H A D | shuttle_usbat.c | 274 US_DEBUGP("usbat_bulk_read: len = %d\n", len); 289 US_DEBUGP("usbat_bulk_write: len = %d\n", len); 315 US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status)); 428 US_DEBUGP("Waited not busy for %d steps\n", i); 442 US_DEBUGP("Waited not busy for %d minutes, timing out.\n", 660 US_DEBUGP("Redoing %s\n", 670 US_DEBUGP("Bummer! %s bulk data 20 times failed.\n", 830 US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags)); 906 US_DEBUGP("usbat_flash_check_media_present: no media detected\n"); 919 US_DEBUGP("usbat_flash_check_media_change [all...] |
H A D | alauda.c | 329 US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n", 405 US_DEBUGP("alauda_init_media: We are ready for action!\n"); 416 US_DEBUGP("alauda_init_media: Media not ready after ack\n"); 423 US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n", 435 US_DEBUGP("Found media with capacity: %ldMB\n", 475 US_DEBUGP("alauda_check_media: No media, or door open\n"); 485 US_DEBUGP("alauda_check_media: Media change detected\n"); 521 US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]); 587 US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone); 607 US_DEBUGP("alauda_read_ma [all...] |
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/drivers/usb/storage/ |
H A D | sierra_ms.c | 49 US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n"); 67 US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n"); 85 US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev); 86 US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU); 87 US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer); 103 US_DEBUGP("SWIMS: Allocation failure\n"); 109 US_DEBUGP("SWIMS: failed SWoC query\n"); 143 US_DEBUGP("SWIMS: sierra_ms_init called\n"); 147 US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n"); 150 US_DEBUGP("SWIM [all...] |
H A D | debug.h | 53 #define US_DEBUGP(x...) printk( KERN_DEBUG USB_STORAGE x ) macro 57 #define US_DEBUGP(x...) macro
|
H A D | isd200.c | 510 US_DEBUGP(" isd200_action(READ_STATUS)\n"); 519 US_DEBUGP(" isd200_action(ENUM,0x%02x)\n",value); 529 US_DEBUGP(" isd200_action(RESET)\n"); 538 US_DEBUGP(" isd200_action(REENABLE)\n"); 547 US_DEBUGP(" isd200_action(SOFT_RESET)\n"); 556 US_DEBUGP(" isd200_action(IDENTIFY)\n"); 564 US_DEBUGP("Error: Undefined action %d\n",action); 574 US_DEBUGP(" isd200_action(0x%02x) error: %d\n",action,status); 596 US_DEBUGP("Entering isd200_IssueATAReadRegs\n"); 601 US_DEBUGP(" Erro [all...] |
H A D | initializers.c | 51 US_DEBUGP("Attempting to init eUSCSI bridge...\n"); 56 US_DEBUGP("-- result is %d\n", result); 71 US_DEBUGP("Sending UCR-61S2B initialization packet...\n"); 86 US_DEBUGP("Getting status packet...\n"); 104 US_DEBUGP("Huawei mode set result is %d\n", result);
|
H A D | freecom.c | 164 US_DEBUGP("Read data Freecom! (c=%d)\n", count); 170 US_DEBUGP ("Freecom readdata transport error\n"); 175 US_DEBUGP("Start of read\n"); 177 US_DEBUGP("freecom_readdata done!\n"); 197 US_DEBUGP("Write data Freecom! (c=%d)\n", count); 203 US_DEBUGP ("Freecom writedata transport error\n"); 208 US_DEBUGP("Start of write\n"); 211 US_DEBUGP("freecom_writedata done!\n"); 233 US_DEBUGP("Freecom TRANSPORT STARTED\n"); 255 US_DEBUGP ("freeco [all...] |
H A D | option_ms.c | 52 US_DEBUGP("Option MS: %s", "DEVICE MODE SWITCH\n"); 97 US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n"); 140 US_DEBUGP("Option MS: option_ms_init called\n"); 147 US_DEBUGP("Option MS: vendor is not Option or not determinable," 151 US_DEBUGP("Option MS: this is a genuine Option device," 156 US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n"); 159 US_DEBUGP("Option MS: Failed to switch to modem mode.\n"); 163 US_DEBUGP("Option MS: %s", "Allowing Mass Storage Mode if device"
|
H A D | transport.c | 168 US_DEBUGP("-- cancelling URB\n"); 180 US_DEBUGP("%s -- cancelling URB\n", 199 US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", 251 US_DEBUGP("%s: result = %d\n", __func__, result); 267 US_DEBUGP("Status code %d; transferred %u/%u\n", 274 US_DEBUGP("-- short transfer\n"); 278 US_DEBUGP("-- transfer complete\n"); 286 US_DEBUGP("-- stall on control pipe\n"); 291 US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe); 298 US_DEBUGP(" [all...] |
H A D | jumpshot.c | 121 US_DEBUGP("jumpshot_bulk_read: len = %d\n", len); 134 US_DEBUGP("jumpshot_bulk_write: len = %d\n", len); 155 US_DEBUGP("jumpshot_get_status: 0x%2x\n", 221 US_DEBUGP("jumpshot_read_data: %d bytes\n", len); 317 US_DEBUGP("jumpshot_write_data: Gah! Waitcount = 10. Bad write!?\n"); 352 US_DEBUGP("jumpshot_id_device: Gah! " 403 US_DEBUGP("jumpshot_handle_mode_sense: Current values\n"); 406 US_DEBUGP("jumpshot_handle_mode_sense: Changeable values\n"); 409 US_DEBUGP("jumpshot_handle_mode_sense: Default values\n"); 412 US_DEBUGP("jumpshot_handle_mode_sens [all...] |
H A D | datafab.c | 126 US_DEBUGP("datafab_bulk_read: len = %d\n", len); 137 US_DEBUGP("datafab_bulk_write: len = %d\n", len); 303 US_DEBUGP("datafab_write_data: Gah! " 345 US_DEBUGP("datafab_determine_lun: locating...\n"); 477 US_DEBUGP("datafab_handle_mode_sense: Current values\n"); 480 US_DEBUGP("datafab_handle_mode_sense: Changeable values\n"); 483 US_DEBUGP("datafab_handle_mode_sense: Default values\n"); 486 US_DEBUGP("datafab_handle_mode_sense: Saves values\n"); 570 US_DEBUGP("datafab_transport: Gah! " 581 US_DEBUGP("datafab_transpor [all...] |
H A D | usb.c | 142 US_DEBUGP("%s\n", __func__); 160 US_DEBUGP("%s\n", __func__); 173 US_DEBUGP("%s\n", __func__); 193 US_DEBUGP("%s\n", __func__); 205 US_DEBUGP("%s\n", __func__); 266 US_DEBUGP("*** thread sleeping.\n"); 270 US_DEBUGP("*** thread awakened.\n"); 282 US_DEBUGP("-- exiting\n"); 298 US_DEBUGP("UNKNOWN data direction\n"); 307 US_DEBUGP("Ba [all...] |
H A D | sddr09.c | 108 /* #define US_DEBUGP printk */ 406 US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", 415 US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", 477 US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n", 498 US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress); 511 US_DEBUGP("Result for send_control in sddr09_erase %d\n", 569 US_DEBUGP("Result for send_control in sddr09_writeX %d\n", 578 US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", 614 US_DEBUGP("Reading status...\n"); 676 US_DEBUGP("Erro [all...] |
H A D | shuttle_usbat.c | 274 US_DEBUGP("usbat_bulk_read: len = %d\n", len); 289 US_DEBUGP("usbat_bulk_write: len = %d\n", len); 315 US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status)); 428 US_DEBUGP("Waited not busy for %d steps\n", i); 442 US_DEBUGP("Waited not busy for %d minutes, timing out.\n", 660 US_DEBUGP("Redoing %s\n", 670 US_DEBUGP("Bummer! %s bulk data 20 times failed.\n", 830 US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags)); 906 US_DEBUGP("usbat_flash_check_media_present: no media detected\n"); 919 US_DEBUGP("usbat_flash_check_media_change [all...] |