Lines Matching refs:US_DEBUGP
168 US_DEBUGP("-- cancelling URB\n");
180 US_DEBUGP("%s -- cancelling URB\n",
199 US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
251 US_DEBUGP("%s: result = %d\n", __func__, result);
267 US_DEBUGP("Status code %d; transferred %u/%u\n",
274 US_DEBUGP("-- short transfer\n");
278 US_DEBUGP("-- transfer complete\n");
286 US_DEBUGP("-- stall on control pipe\n");
291 US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
298 US_DEBUGP("-- babble\n");
303 US_DEBUGP("-- transfer cancelled\n");
308 US_DEBUGP("-- short read transfer\n");
313 US_DEBUGP("-- abort or disconnect in progress\n");
318 US_DEBUGP("-- unknown error\n");
333 US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
369 US_DEBUGP("%s: xfer %u bytes\n", __func__, length);
396 US_DEBUGP("%s: xfer %u bytes\n", __func__, length);
428 US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__,
433 US_DEBUGP("usb_sg_init returned %d\n", result);
446 US_DEBUGP("-- cancelling sg request\n");
611 US_DEBUGP("-- command was aborted\n");
618 US_DEBUGP("-- transport indicates error, resetting\n");
647 US_DEBUGP("-- CB transport device requiring auto-sense\n");
657 US_DEBUGP("-- transport indicates command failure\n");
672 US_DEBUGP("-- SAT supported, increasing auto-sense\n");
686 US_DEBUGP("-- unexpectedly short transfer\n");
699 US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
717 US_DEBUGP("-- auto-sense aborted\n");
735 US_DEBUGP("-- auto-sense failure, retry small sense\n");
744 US_DEBUGP("-- auto-sense failure\n");
764 US_DEBUGP("-- SANE_SENSE support enabled\n");
770 US_DEBUGP("-- Sense data truncated to %i from %i\n",
776 US_DEBUGP("-- Result from auto-sense is %d\n", temp_result);
777 US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
860 US_DEBUGP("%s called\n", __func__);
867 US_DEBUGP("-- cancelling URB\n");
873 US_DEBUGP("-- cancelling sg request\n");
896 US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result);
914 US_DEBUGP("CBI data stage result is 0x%x\n", result);
932 US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n",
960 US_DEBUGP("CBI IRQ data showed reserved bType 0x%x\n",
1002 US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
1051 US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n",
1058 US_DEBUGP("Bulk command transfer result=%d\n", result);
1075 US_DEBUGP("Bulk data transfer result 0x%x\n", result);
1094 US_DEBUGP("Attempting to get CSW...\n");
1103 US_DEBUGP("Received 0-length CSW; retrying...\n");
1112 US_DEBUGP("Attempting to get CSW (2nd try)...\n");
1118 US_DEBUGP("Bulk status result = %d\n", result);
1124 US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
1129 US_DEBUGP("Bulk logical error\n");
1140 US_DEBUGP("Learnt BCS signature 0x%08X\n",
1143 US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n",
1222 US_DEBUGP("No reset during disconnect\n");
1230 US_DEBUGP("Soft reset failed: %d\n", result);
1240 US_DEBUGP("Reset interrupted by disconnect\n");
1244 US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n");
1247 US_DEBUGP("Soft reset: clearing bulk-out endpoint halt\n");
1254 US_DEBUGP("Soft reset failed\n");
1256 US_DEBUGP("Soft reset done\n");
1266 US_DEBUGP("%s called\n", __func__);
1282 US_DEBUGP("%s called\n", __func__);
1303 US_DEBUGP("unable to lock device for reset: %d\n", result);
1308 US_DEBUGP("No reset during disconnect\n");
1311 US_DEBUGP("usb_reset_device returns %d\n",