Lines Matching refs:US_DEBUGP
108 /* #define US_DEBUGP printk */
406 US_DEBUGP("Result for send_control in sddr09_read2%d %d\n",
415 US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n",
477 US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n",
498 US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress);
511 US_DEBUGP("Result for send_control in sddr09_erase %d\n",
569 US_DEBUGP("Result for send_control in sddr09_writeX %d\n",
578 US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n",
614 US_DEBUGP("Reading status...\n");
676 US_DEBUGP("Error: Requested lba %u exceeds "
687 US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
698 US_DEBUGP("Read %d pages, from PBA %d"
803 US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
809 US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
830 US_DEBUGP("Rewrite PBA %d (LBA %d)\n", pba, lba);
835 US_DEBUGP("sddr09_write_inplace returns %d\n", result);
902 US_DEBUGP("Error: Requested lba %u exceeds "
935 US_DEBUGP("Read control address %lu, blocks %d\n",
982 US_DEBUGP("sddr09_get_wp: read_status fails\n");
985 US_DEBUGP("sddr09_get_wp: status 0x%02X", status);
988 US_DEBUGP(" WP");
991 US_DEBUGP(" Ready");
993 US_DEBUGP(" Suspended");
995 US_DEBUGP(" Error");
996 US_DEBUGP("\n");
1008 US_DEBUGP("Reading capacity...\n");
1013 US_DEBUGP("Result of read_deviceID is %d\n", result);
1246 US_DEBUGP("Found %d LBA's\n", lbact);
1277 US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
1283 US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
1285 US_DEBUGP("-- stall on control interface\n");
1288 US_DEBUGP("-- Unknown error. Rejecting device\n");
1318 US_DEBUGP("sddr09_init: send_command fails\n");
1322 US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]);
1327 US_DEBUGP("sddr09_init: 2nd send_command fails\n");
1331 US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]);
1361 US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
1387 US_DEBUGP("dpcm_transport: Invalid LUN %d\n",
1494 US_DEBUGP("SDDR09: Dummy up request for "
1521 US_DEBUGP("READ_10: read page %d pagect %d\n",
1536 US_DEBUGP("WRITE_10: write page %d pagect %d\n",
1564 US_DEBUGP("SDDR09: Send control for command %s\n", ptr);
1568 US_DEBUGP("sddr09_transport: sddr09_send_scsi_command "
1581 US_DEBUGP("SDDR09: %s %d bytes\n",