Searched hist:228561 (Results 1 - 17 of 17) sorted by relevance
/freebsd-11-stable/sys/dev/cxgbe/ | ||
H A D | osdep.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4_l2t.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4_l2t.c | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4_ioctl.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | offload.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | adapter.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4_sge.c | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4_main.c | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
/freebsd-11-stable/sys/dev/cxgbe/firmware/ | ||
H A D | t4fw_cfg_uwire.txt | 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4fw_cfg.txt | 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4fw_interface.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
/freebsd-11-stable/sys/dev/cxgbe/common/ | ||
H A D | t4_hw.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | common.h | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
H A D | t4_hw.c | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
/freebsd-11-stable/sys/modules/cxgbe/ | ||
H A D | Makefile | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
/freebsd-11-stable/usr.sbin/cxgbetool/ | ||
H A D | cxgbetool.c | diff 228561 Fri Dec 16 02:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
/freebsd-11-stable/share/man/man4/ | ||
H A D | cxgbe.4 | diff 228561 Fri Dec 16 00:23:31 MST 2011 np Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month |
Completed in 831 milliseconds