Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r259103 and r259382.

r259103:
cxgbe(4): save a copy of the RSS map for each port for the driver's use.

r259382:
Read card capabilities after firmware initialization, instead of setting
them up as part of firmware initialization (which the driver gets to do
only if it's the master driver).

Read the range of tids available for the ETHOFLD functionality if it's
enabled.

New is_ftid() and is_etid() functions to test whether a tid falls within
the range of filter tids or ETHOFLD tids respectively.

MFC r258879:
cxgbe(4): T4_SET_SCHED_CLASS and T4_SET_SCHED_QUEUE ioctls to program
scheduling classes in the chip and to bind tx queue(s) to a scheduling
class respectively. These can be used for various kinds of tx traffic
throttling (to force selected tx queues to drain at a fixed Kbps rate,
or a % of the port's total bandwidth, or at a fixed pps rate, etc.).

MFC r256459:
cxgbe(4): Update T4 and T5 firmwares to 1.9.12.0

- MFC r252661, r252705, r252711, r252715, r252716, r252724, r252728,
r252747.
- Connect t3_tom and t4_tom to the build (r252555 enables them).

r252661:
- Include the T5 firmware with the driver.
- Update the T4 firmware to the latest.
- Minor reorganization and updates to the version macros, etc.

r252705:
- Read all TP parameters in one place.
- Read the filter mode, calculate various shifts, and use them
properly during active open (in select_ntuple).

r252711:
The T5 allows the driver to specify the ISS. Do so; use the ISS picked
by the kernel.

r252715:
Ring the egress queue's doorbell as soon as there are 8 or more
descriptors ready to be processed.

r252716:
Pay attention to TCP_NODELAY when it's set/unset after the connection
is established.

r252724:
On-the-fly changes to the interrupt coalescing timer should apply to the
TOE rx queues too.

r252728:
- Make note of interface MTU change if the rx queues exist, and not just
when the interface is up.
- Add a tunable to control the TOE's rx coalesce feature (enabled by
default as it always has been). Consider the interface MTU or the
coalesce size when deciding which cluster zone to use to fill the
offload rx queue's free list. The tunable is:
dev.{t4nex,t5nex}.<N>.toe.rx_coalesce

r252747:
- Show the reason why link is down if this information is available.
- Display the temperature and PHY firmware version of the BT PHY.

MFC all cxgbe(4) changes missing from stable/9:
r248925, r249368, r249370, r249376, r249382, r249383, r249385, r249391,
r249392, r249393, r249627, r249629, r250090, r250092, r250093, r250117,
r250218, r250221, r250614, r251213, r251317, r251358, r251434, r251518,
r251638, r252312, r252469, r252470, r250697(kib).

r248925:
Support for Chelsio's 40G Terminator 5 (aka T5) ASIC.
...

r249368:
Set and display the IP fragment bit correctly when dealing with
the filter mode.

r249370:
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or
t5nex attach to their devices.

r249376:
- Explain clearly why a different firmware is being installed (if/when
it is being installed). Improve other error messages while here.

- Select special FPGA specific configuration profile when appropriate.

r249382:
There is no need for elaborate queries and error checking when trying to
set FW4MSG_ENCAP.

r249383:
Get rid of a couple of stray \n's.

r249385:
cxgbe/tom: Slight simplification of code that calculates options2.

r249391:
Auto-reduce the holdoff timers that are greater than the maximum value
allowed by the hardware.

r249392:
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/).

r249393:
Add pciids of the T5 based cards. The ones that I haven't tested with
cxgbe(4) are disabled for now. This will change.

r249627:
cxgbe/tom: Update the CLIP table on the chip when there are changes
to the list of IPv6 addresses on the system. The table is used for
TOE+IPv6 only.

r249629:
cxgbe(4): Refuse to install T5 firmwares on a T4 card (and vice versa).

r250090:
cxgbe(4): Some updates to shared code.

r250092:
- Provide accurate ifmedia information so that 40G ports/transceivers are
displayed properly in ifconfig, etc.

- Use the same number of tx and rx queues for a 40G port as for a 10G port.

r250093:
Attach to the T580 (2 x 40G) card.

r250117:
Fix DDP breakage introduced in r248925. Bitwise OR has higher
precedence than ternary conditional.

r250218:
cxgbe/tom: Do not use M_PROTO1 to mark rx zero-copy mbufs as special.
All the M_PROTOn flags are clobbered when an mbuf is appended to the
socket buffer.

r250221:
cxgbe: Switch to a better way to install firmware.

r250614:
Deal correctly with 40G ports that don't have any transceiver plugged
in. Do not claim that they have unknown tranceivers.

r251213:
cxgbe(4): Some more debug sysctls. These work on both T4 and T5 based
cards.

r251317:
cxgbe(4): t4fw_cfg must be explicitly loaded if the driver is being
loaded via loader.conf.

r251358:
cxgbe(4): Provide accurate hit count for filters on T5 cards. The
location within the TCB and the size have both changed.

r251434:
cxgbe(4): Never install a firmware if hw.cxgbe.fw_install is 0.

r251518:
cxgbe/tom: Fix bad signed/unsigned mixup in the stid allocator. This
fixes a panic when allocating a mixture of IPv6 and IPv4 stids.

r251638:
cxgbe/tom: Allow caller to select the queue (control or data) used to
send the CPL_SET_TCB_FIELD request in t4_set_tcb_field().

r252312:
Update T5 register ranges. This is so that regdump skips over registers
with read side-effects.

r252469:
Add a sysctl to get the number of filters available.

sysctl dev.t4nex.<N>.nfilters
sysctl dev.t5nex.<N>.nfilters

r252470:
Count the number of hits for a filter by default.

r250697:
Add dependencies on the firmware, which allows the loading of the cxgb
and cxgbe modules.

MFC r245243, r245274, r245276, r245434, r245441, r245448, r245467,
r245468, r245517, r245518, r245520, r245567, r245933, r245935, r245936,
r245937, r246093, r246385, r246575, r247062, r247122, r247289, r247291,
r247347, r247355, and r241733.

Note that TCP_OFFLOAD is not enabled in 9 yet and so some of these MFCs
don't really affect functionality. But they do help future MFCs
(related to TCP_OFFLOAD or not) by minimizing diffs with the driver in
head.

r245243:
cxgbe(4): updates to the configuration file that controls how hardware
resources are partitioned.

- Reduce the number of virtual interfaces reserved for PF4. This leaves
spare room in the source MAC table and allows the driver to setup
filters that rewrite the source MAC address.

- Reduce the number of filters and use the freed up space for the CLIP
(Compressed Local IPv6 addresses) table. This is a prerequisite for
IPv6 TOE support which will follow separately in a series of commits.

r245274:
cxgbe(4): Add functions to help synchronize "slow" operations (those not
on the fast data path) and use them instead of frobbing the adapter lock
and busy flag directly.

Other changes made while reworking all slow operations:
- Wait for the reply to a filter request (add/delete). This guarantees
that the operation is complete by the time the ioctl returns.
- Tidy up the tid_info structure.
- Do not allow the tx queue size to be set to something that's not a
power of 2.

r245276:
Overhaul the stid allocator so that it can be used for IPv6 servers
too. The entry for an IPv6 server in the TCAM takes up the equivalent
of two ordinary stids and must be properly aligned too.

r245434:
cxgbe(4): Updates to the hardware L2 table management code.

- Add full support for IPv6 addresses.

- Read the size of the L2 table during attach. Do not assume that PCIe
physical function 4 of the card has all of the table to itself.

- Use FNV instead of Jenkins to hash L3 addresses and drop the private
copy of jhash.h from the driver.

r245441:
cxgbe/tom: Miscellaneous updates for TOE+IPv6 support (more to follow).

- Teach find_best_mtu_idx() to deal with IPv6 endpoints.

- Install correct protosw in offloaded TCP/IPv6 sockets when DDP is
enabled.

- Move set_tcp_ddp_ulp_mode to t4_tom.c so that t4_tom.h can be included
without having to drag in t4_msg.h too. This was bothering the iWARP
driver for some reason.

r245448:
cxgbe/tom: Basic CLIP table management.

This is the Compressed Local IPv6 table on the chip. To save space, the
chip uses an index into this table instead of a full IPv6 address in
some of its hardware data structures.

For now the driver fills this table with all the local IPv6 addresses
that it sees at the time the table is initialized. I'll improve this
later so that the table is updated whenever new IPv6 addresses are
configured or existing ones deleted.

r245467:
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open).

r245468:
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (passive open).

r245517:
cxgbe: Fix the for_each_foo macros -- the last argument should not share
its name with any member of struct sge.

r245518:
cxgbe: Do a more thorough job in the CLEAR_STATS ioctl.

r245520:
Allow "ivlan" (inner VLAN) to be used as an alias for "vlan" when
specifying match criteria. "vlan" continues to be valid here, and it
continues to be valid when deleting, rewriting, inserting, or stacking
an 802.1q tag to a matching packet.

r245567:
cxgbe: Make the for_each macros safer to use by turning them
into a single statement each.

r245933:
cxgbe/tom: List IFCAP_TOE6 as supported now that all the required pieces
are in place. You still have to enable it explicitly, after loading the
t4_tom KLD.

r245935:
Add a couple of missing error codes. Treat CPL_ERR_KEEPALV_NEG_ADVICE as
negative advice and not a fatal error.

r245936:
Force the 404-BT card (4 x 1G) to use the "uwire" configuration file.

r245937:
Install an extra hold on the newly allocated synq entry so that it
cannot be freed while do_pass_accept_req is running. This closes a race
where do_pass_establish on another CPU (the driver chose a different
queue for the new tid) expands the synq entry into a full PCB and then
releases the only hold on it, all while do_pass_accept_req is still
running.

r246093:
Provide a statistic to track the number of drops in each of the port's
txq's buf_ring. The aggregate for all the queues of a port is already
provided in ifnet->if_snd.ifq_drops.

r246385:
Busy-wait when cold.

r246575:
Do not hold locks around hardware context reads.

r247062:
cxgbe(4): Assume that CSUM_TSO in the transmit path implies CSUM_IP and
CSUM_TCP too. They are all set explicitly by the kernel usually.

r247122:
cxgbe(4): Add sysctls to extract debug information from the chip:

dev.t4nex.X.misc.cim_la logic analyzer dump
dev.t4nex.X.misc.cim_qcfg queue configuration
dev.t4nex.X.misc.cim_ibq_xxx inbound queues
dev.t4nex.X.misc.cim_obq_xxx outbound queues

r247289:
cxgbe(4): Update firmware to 1.8.4.0.

r247291:
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating
them in a firmware message if it is able to do so. This works out
better for one of the FIFOs in the chip.

r247347:
cxgbe(4): Consider all the API versions of the interfaces exported by
the firmware (instead of just the main firmware version) when evaluating
firmware compatibility. Document the new "hw.cxgbe.fw_install" knob
being introduced here.

This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will
mostly do what was requested in the PR but it's a bit more intelligent
in that it won't reinstall the same firmware repeatedly if the knob is
left set.

r247355:
cxgbe(4): Report unusual out of band errors from the firmware.

r241733 (by ed@):
Prefer __containerof() over __member2struct().

The former works better with qualifiers, but also properly type checks
the input pointer.

MFC r241397-241399, r241409, r241493-24194.

r241397:
Remove unused item. cxgbe's rx queue's lock was removed a long time ago.

r241398:
There is no need to report the same error twice.

r241399:
Add a driver ioctl to read a byte from any device on a port's i2c bus.
This lets userspace read arbitrary information from the SFP+ modules
etc. on this bus.

Reading multiple bytes in the same transaction isn't possible right now.
I'll update the driver once the chip's firmware supports this.

r241409:
Add a driver ioctl to clear a port's MAC statistics.

r241493:
Use global knob in the TP_PARA_REG3 register to disable congestion
drops if the user has chosen this behaviour.

r241494:
Temporary fix for kern/172364.

MFC r240443:
Update interface to firmware 1.6.2 and include the firmware in the driver.

MFC r237832, r237436, r237439, r237463, r237512, r237587, r237799,
r237819, r237831.

r237832:
cxgb(4): IPv6 rx/tx hw checksum, IPv6 TSO and LRO too.

r237436:
cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.

r237439:
Do not read registers with read side effects while performing a register
dump for cxgbetool.

r237463:
Do not allocate extra vectors when adapter is not TOE
capable (or toecaps have been disallowed by the user).

r237512:
Better way to determine the status page length and rx pad boundary.

r237587:
Allow cxgbe(4) running within a VM to attach to its devices that have been
exported via PCI passthrough.

r237799:
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).

r237819:
cxgbe(4): support for IPv6 TSO and LRO.

r237831:
- Assign (don't OR) the CSUM_XXX bits to csum_flags in the rx checksum code.
- Fix TSO/TSO4 mixup.
- Add IFCAP_LINKSTATE to the available/enabled capabilities.

MFC r228491, r228561, r228594.

r228491:
Do not clobber the ingress queue's congestion setting.

r228561:
Many updates to cxgbe(4)

- Device configuration via plain text config file. Also able to operate
when not attached to the chip as the master driver.

- Generic "work request" queue that serves as the base for both ctrl and
ofld tx queues.

- Generic interrupt handler routine that can process any event on any
kind of ingress queue (via a dispatch table).

- A couple of new driver ioctls. cxgbetool can now install a firmware
to the card ("loadfw" command) and can read the card's memory
("memdump" and "tcb" commands).

- Lots of assorted information within dev.t4nex.X.misc.* This is
primarily for debugging and won't show up in sysctl -a.

- Code to manage the L2 tables on the chip.

- Updates to cxgbe(4) man page to go with the tunables that have changed.

- Updates to the shared code in common/

- Updates to the driver-firmware interface (now at fw 1.4.16.0)

r228594:
Catch up with new driver ioctls in cxgbe.

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Update to firmware interface 1.3.10

MFC after: 1 week

Update header and related code for firmware 1.3.8

MFC after: 3 days

Upgrade the firmware on the card automatically if a better version is
available. Downgrade only for a major version mismatch.

MFC after: 1 week

cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters.

MFC after: 3 weeks