Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

[ath] remove the inline version of the register access macros.

These are going to be much more efficient on low end embedded systems
but unfortunately they make it .. less convenient to implement correct
bus barriers and debugging. They also didn't implement the register
serialisation workaround required for Owl (AR5416.)

So, just remove them for now. Later on I'll just inline the routines
from ah_osdep.c.

[ath] add explicit bus barriers.

The ath hal and driver code all assume the world is an x86 or the
bus layer does an explicit bus flush after each operation (eg netbsd.)

However, we don't do that.

So, to be "correct" on platforms like sparc64, mips and ppc (and maybe
ARM, I am not sure), just do explicit barriers after each operation.

Now, this does slow things down a tad on embedded platforms but I'd
rather things be "correct" versus "fast." At some later point if someone
wishes it to be fast then we should add the barrier calls to the HAL and
driver.

Tested:

* carambola 2 (AR9331.)

Pull in r267961 and r267973 again. Fix for issues reported will follow.

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies

Add a function to check whether the given register can be accessed whilst
the chip is asleep.

It's AR5416 and later specific; I'll add a HAL method to generalise it
later.

Tested:

* AR5416, STA mode

Add some debugging code to print out if registers are touched whilst the
device is asleep.

This doesn't avoid logging errors for things that are actually OK to
access whilst the chip is asleep (eg, the RTC registers (0x7000->0x70ff
on the AR5416 and later.)

But, this is a pretty good indicator if things are accessed incorrectly.

Tested:

* AR5416, STA

Fix the HAL debugging to only use one bit to mark a message as unmaskable.

Whilst I'm here, remove the duplication of the #define.

Stop using the hardware register value byte order swapping for now,
at least until I can root cause what's going on.

The only platform I've seen this on is the AR9220 when attached to
the AR71xx CPUs. I get immediate PCIe bus errors and all subsequent
accesses cause further MIPS bus exceptions. I don't have any other
big-endian platforms to test this on.

If I get a chance (or two), I'll try to whack this on a bus analyser
and see exactly what happens.

I'd rather leave this on, especially for slower, embedded platforms.
But the #ifdef hell is something I'm trying to avoid.

Add a threadid to the ah_decode API.

This adds the current thread ID to each logged register and mark entry,
allowing for easier debugging of concurrent/overlapping NIC operations.

Introduce a work-around for issues with the AR5416 based MAC on SMP devices.

The AR5416 MAC (which shows up in the AR5008, AR9001, AR9002 devices) has
issues with PCI transactions on SMP machines. This work-around enforces
that register access is serialised through a (global for now) spinlock.

This should stop the hangs people have seen with the AR5416 PCI devices
on SMP hosts.

Obtained by: Linux, Atheros

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.

This means that their use is restricted to a single C file.

Fix a corner case in the HAL debugging changes, where ah was NULL.

Although I tried to fix this earlier by introducing HALDEBUG_G(), it
turns out there seem to be other cases where the pointer value is still
NULL.

* Fix DO_HALDEBUG() and the HALDEBUG macro to check whether ah is NULL
before deferencing it
* Remove HALDEBUG_G() as it's no longer needed

This is hopefully a merge candidate for 9.0-RELEASE as enabling
debugging at startup could result in a kernel panic.

Add a missing check for the global ath_hal_debug.

This was removed accidentally when the per HAL instance
code was added, and not reverted when I added back the
global debug variable (for early chip setup debugging.)

Commit missing piece from a couple days ago - re-add ath_hal_debug.

Break out most of the HAL related tweaks into a per-HAL instance,
rather than global variables.

This specifically allows for debugging to be enabled per-NIC, rather
than globally.

Since the ath driver doesn't know about AH_DEBUG, and to keep the ABI
consistent regardless of whether AH_DEBUG is enabled or not, enable the
debug parameter always but only conditionally compile in the debug
methods if needed.

The ALQ support is currently still global pending some brainstorming.

Submitted by: ssgriffonuser@gmail.com
Reviewed by: adrian, bschmidt

Fix the debugging code path to correctly support HAL_DEBUG_UNMASKABLE.

Make the alq log path tunable

Fix a completely wrong variable reference.

Make the ar2133ForceBias() call controllable at runtime.

At least one AR5416 user has reported measurable throughput drops
with this option. For now, disable it and make it a run-time
twiddle. It won't take affect until the next radio programming
trip though (eg channel scan, channel change.)

Change HALDEBUG() to be a macro that conditionally calls the debug output routine.

The earlier way of doing debugging would evaluate the function parameters
before calling the HALDEBUG. In the case of detailed register debugging
would mean a -lot- of unneeded register IO and other stuff was going on.

This method evaluates the ath_hal_debug variable before the function
parameters are evaluated, drastically reducing the amount of overhead
enabling HAL debugging during compilation.

Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.

Add necessary include.

remove extranous return

Submitted by: phk
MFC after: 1 week

Fix AR5416 and later parts when building with AH_DEBUG or similar defined:
always define OS_REG_UNSWAPPED and use it in ath_hal_reg_{read,write}.

Approved by: re (kib)

kill more portability functions that are no longer useful

kill unused OS_GETUPTIME

fix build w/ AH_DEBUG

Switch to ath hal source code. Note this removes the ath_hal
module; the ath module now brings in the hal support. Kernel
config files are almost backwards compatible; supplying

device ath_hal

gives you the same chip support that the binary hal did but you
must also include

options AH_SUPPORT_AR5416

to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.

prepare for a new hal

Multi-bss (aka vap) support for 802.11 devices.

Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)

update copyrights to 2007 and convert to be 2-clause bsd-only

Remove unnecessary suser() check in the sysctl to set up ath_hal
logging: the sysctl framework will already have checked for privilege
if a sysctl value is being set.

Discussed a long time ago with: sam

o move ath hal os glue code from the hal to the driver: this code was
part of the hal distribution early on when the hal was built for
each os but it's been portable for a long time so move the os-specific
code out (and off the vendor branch)
o correct the copyright on ah_osdep.?; it was mistakenly given a
restricted license and not a dual-bsd/gpl license
o remove the module api definition as it was never used
o fixup include paths for move of ah_osdep.h

MFC after: 2 weeks