- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r281380:
Fix the IPV6_MULTICAST_IF sockopt handling. RFC 3493 says when the
interface index is specified as zero, the system should select the
interface to use for outgoing multicast packets. Even the comment
for the in6p_set_multicast_if() function says about index of zero.
But in fact for zero index the function just returns EADDRNOTAVAIL.

I.e. if you first set some interface and then will try reset it
with zero ifindex, you will get EADDRNOTAVAIL.

Reset im6o_multicast_ifp to NULL when interface index specified as
zero. Also return EINVAL in case when ifnet_byindex() returns NULL.
This will be the same behaviour as when ifindex is bigger than
V_if_index. And return EADDRNOTAVAIL only when interface is not
multicast capable.

MFC r273855:
Fix mbuf leak in IPv6 multicast code.
When multicast capable interface goes away, it leaves multicast groups,
this leads to generate MLD reports, but MLD code does deffered send and
MLD reports are queued in the in6_multi's in6m_scq ifq. The problem is
that in6_multi structures are freed when interface leaves multicast groups
and thread that does deffered send will not take these queued packets.

PR: 194577

MFC r273857:
Move ifq drain into in6m_purge().

Suggested by: bms

Sponsored by: Yandex LLC

MFC r262351:

Remove KASSERT from in6p_lookup_mcast_ifp().

When the devel/jenkins port, version 1.551 was started,
the kernel would panic if INVARIANTS was enabled in the kernel config.

Suggested by: bms

Approved by: re (gjb)

MFC r259884:

Correct warnings comparing unsigned variables < 0 constantly reported
while building kernels. All instances removed are indeed unsigned so
the expressions could not be true.

MFC r264364:
Properly release the in6_multi lock.

Sponsored by: Yandex LLC

MFC r259840:

In sys/netinet6/in6_mcast.c, in6m_is_ifp_detached() is only used
whenever KTR is defined, so put it between #ifdef KTR guards. This
avoids a warning about a unused function if KTR is not enabled.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Fix an integer overflow in computing the size of a temporary buffer
can result in a buffer which is too small for the requested
operation.

Security: CVE-2013-3077
Security: FreeBSD-SA-13:09.ip_multicast

Merge multi-FIB IPv6 support from projects/multi-fibv6/head/:

Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.

This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.

Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days

Convert all users of IF_ADDR_LOCK to use new locking macros that specify
either a read lock or write lock.

Reviewed by: bz
MFC after: 2 weeks

Return the correct value for the IPV6_MULTICAST_HOPS getsockopt() call.

Submitted by: rpaulo
MFC after: 3 days

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

Adapt r197136 to IPv6 stack:
Comment some flawed assumptions in in6p_join_group() about
mixing SSM full-state and delta-based APIs.

MFC after: 1 day

Adapt r197135 to IPv6 stack:
Don't allow joins w/o source on an existing group.
This is almost always pilot error.

We don't need to check for group filter UNDEFINED state at t1,
because we only ever allocate filters with their groups, so we
unconditionally reject such calls with EINVAL.
Trying to change the active filter mode w/o going through IPV6_MSFILTER
is also disallowed.

MFC after: 1 day

Adapt r197132 to IPv6 stack:
Tighten input checking in in6p_join_group():
* Don't try to use the source address, when its family is unspecified.
* If we get a join without a source, on an existing inclusive
mode group, this is an error, as it would change the filter mode.

Fix a problem with the handling of in6_mfilter for new memberships:
* Do not rely on im6f being NULL; it is explicitly initialized to a
non-NULL pointer when constructing a membership.
* Explicitly initialize *im6f to EX mode when the source address
is unspecified.

This fixes a problem with in_mfilter slot recycling in the join path.

MFC after: 1 day

Adapt r197314 to IPv6 stack:
Return ENOBUFS consistently if user attempts to exceed
in_mcast_maxsocksrc resource limit.

MFC after: 1 day

Adapt r197130 to IPv6 stack:
Fix an obvious logic error in the IPv4 multicast leave processing,
where the filter mode vector was not updated correctly after the leave.

MFC after: 1 day

Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by: bz
Approved by: re (vimage blanket)

Fix a problem, whereby misbehaving IPv6 applications, which don't include
a valid zone ID or interface identifier in a v6 multicast leave, would
trigger a fairly paranoid KASSERT().

Observed with Boost++ regression tests on ref8.freebsd.org.

Approved by: re (kib)

Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)

After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.

Merge final round of MLD changes from p4:
ip6_input.c, in6.h:
* Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6.
* Always set this flag if HBH Router Alert option is present for MLD,
even when not forwarding.

icmp6.c:
* In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent.
* Use scope ID for verifying input. Do not apply SSM filters here, no inpcb.
* Check for M_RTALERT_MLD when validating MLD traffic, as we can't see
IPv6 hop options outside of ip6_input().

in6_mcast.c:
* Use KAME scope/zone ID in in6_multi.
* Update net.inet6.ip6.mcast.filters implementation to use scope IDs
for comparisons.
* Fix scope ID treatment in multicast socket option processing.
Scope IDs passed in from userland will be ignored as other less
ambiguous APIs exist for specifying the link.
* Tighten userland input checks in IPv6 SSM delta and full-state ops.
* Source filter embedded scope IDs need to be revisited, for now
just clear them and ignore them on input.
* Adapt KAME behaviour of looking up the scope ID in the default zone
for multicast leaves, when the interface is ambiguous.

mld6.c:
* Tighten origin checks on MLD traffic as per RFC3810 Section 6.2:
* ip6_src MAY be the unspecified address for MLDv1 reports.
* ip6_src MAY have link-local address scope for MLDv1 reports,
MLDv1 queries, and MLDv2 queries.
* Perform address field validation *before* accepting queries.
* Use KAME scope/zone ID in query/report processing.
* Break const correctness for mld_v1_input_report(), mld_v1_input_query()
as we temporarily modify the input mbuf chain.
* Clear the scope ID before handoff to userland MLD daemon.
* Fix MLDv1 old querier present timer processing.
With the protocol defaults, hosts should revert to MLDv2 after 260s.
* Add net.inet6.mld.v1enable sysctl, default to on.

ifmcstat.c:
* Use sysctl by default; -K requests kvm(3) if so compiled.

mld.4:
* Connect man page to build.

Tested using PCS.

Silence unsolicited spam printed out when KTR_MLD happens to be
in KTR_COMPILE mask. Compiling KTR trace points in does not necessarily
mean enabling them, use proper check against ktr_mask instead.

Permit buiding kernels with options VIMAGE, restricted to only a single
active network stack instance. Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:

1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables. As an example, V_ifnet becomes:

options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet
default build: vnet_net_0._ifnet
options VIMAGE_GLOBALS: ifnet

2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:

INIT_VNET_NET(ifp->if_vnet); becomes

struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];

3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals. If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.

4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet. options VIMAGE builds
will fill in those fields as required.

5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.

6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod. SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.

Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.

Reviewed by: bz, rwatson
Approved by: julian (mentor)

Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit:
import from p4 bms_netdev. Summary of changes:

* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.

NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.

This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.

Import IPv6 SSM module but do not connect it to the build.