1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21
22#
23# Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved.
24#
25
26#	Configuration variables for the runtime environment of the nightly
27# build script and other tools for construction and packaging of releases.
28# This script is sourced by 'nightly' and 'bldenv' to set up the environment
29# for the build. This example is suitable for building a developers workspace,
30# which will contain the resulting packages and archives. It is based off
31# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do:
32#	check ELF ABI/versioning (-A)
33#	runs 'make check' (-C)
34#	DEBUG and non-DEBUG builds (-D)
35#	runs lint in usr/src (-l plus the LINTDIRS variable)
36#	sends mail on completion (-m and the MAILTO variable)
37#	creates packages for PIT/RE (-p)
38#	checks for changes in ELF runpaths (-r)
39#
40NIGHTLY_OPTIONS="-ACDlmpr";		export NIGHTLY_OPTIONS
41
42# This is a variable for the rest of the script - GATE doesn't matter to
43# nightly itself
44GATE=onnv-bugfixes;			export GATE
45
46# CODEMGR_WS - where is your workspace at (or what should nightly name it)
47CODEMGR_WS="/builds/$GATE";			export CODEMGR_WS
48
49# PARENT_WS is used to determine the parent of this workspace. This is
50# for the options that deal with the parent workspace (such as where the
51# proto area will go).
52#
53# If you use this, it must be local (or nfs): nightly cannot copy
54# over ssh or http.
55PARENT_WS="/ws/onnv-gate";			export PARENT_WS
56
57# CLONE_WS is the workspace nightly should do a bringover from.
58CLONE_WS="ssh://anonhg@onnv.sfbay.sun.com//export/onnv-clone";	export CLONE_WS
59
60# CLOSED_CLONE_WS is the workspace from which nightly should acquire
61# the usr/closed tree.
62CLOSED_CLONE_WS="${CLONE_WS}/usr/closed";	export CLOSED_CLONE_WS
63
64# This flag controls whether to build the closed source.  If
65# undefined, nightly(1) and bldenv(1) will set it according to whether
66# the closed source tree is present.  CLOSED_IS_PRESENT="no" means not
67# building the closed sources.
68# CLOSED_IS_PRESENT="yes";		export CLOSED_IS_PRESENT
69
70# The bringover, if any, is done as STAFFER.
71# Set STAFFER to your own login as gatekeeper or developer
72# The point is to use group "staff" and avoid referencing the parent
73# workspace as root.
74# Some scripts optionally send mail messages to MAILTO.
75#
76STAFFER=nobody;				export STAFFER
77MAILTO=$STAFFER;			export MAILTO
78
79# The project (see project(4)) under which to run this build.  If not
80# specified, the build is simply run in a new task in the current project.
81BUILD_PROJECT=;				export BUILD_PROJECT
82
83# You should not need to change the next four lines
84LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME
85ATLOG="$CODEMGR_WS/log";			export ATLOG
86LOGFILE="$ATLOG/nightly.log";			export LOGFILE
87MACH=`uname -p`;				export MACH
88
89# When the -A flag is specified, and ELF_DATA_BASELINE_DIR is defined,
90# the ELF interface description file resulting from the build is compared
91# to that from the specified directory. This ensures that our object
92# versioning evolves in a backward compatible manner.
93#
94# You should not need to change this unless you wish to use locally cached
95# baseline files. If you use this, it must be local (or nfs): nightly cannot
96# copy over ssh or http.
97#
98ELF_DATA_BASELINE_DIR="/ws/onnv-gate/usr/src/ELF-data-baseline.$MACH";	export ELF_DATA_BASELINE_DIR
99
100# This is usually just needed if the closed tree is missing, or when
101# building a project gate with the -O (cap oh) flag.
102# ON_CRYPTO_BINS="$PARENT_WS/packages/$MACH/on-crypto.$MACH.tar.bz2"
103# export ON_CRYPTO_BINS
104
105# REF_PROTO_LIST - for comparing the list of stuff in your proto area
106# with. Generally this should be left alone, since you want to see differences
107# from your parent (the gate).
108#
109REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST
110
111#
112#	build environment variables, including version info for mcs, motd,
113# motd, uname and boot messages. Mostly you shouldn't change this except
114# when the release slips (nah) or you move an environment file to a new
115# release
116#
117ROOT="$CODEMGR_WS/proto/root_${MACH}";	export ROOT
118SRC="$CODEMGR_WS/usr/src";         	export SRC
119VERSION="$GATE";			export VERSION
120
121#
122# the RELEASE and RELEASE_DATE variables are set in Makefile.master;
123# there might be special reasons to override them here, but that
124# should not be the case in general
125#
126# RELEASE="5.10.1";			export RELEASE
127# RELEASE_DATE="October 2007";		export RELEASE_DATE
128
129# proto area in parent for optionally depositing a copy of headers and
130# libraries corresponding to the protolibs target
131# not applicable given the NIGHTLY_OPTIONS
132#
133PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT
134PARENT_TOOLS_ROOT=$PARENT_WS/usr/src/tools/proto/root_$MACH-nd; export PARENT_TOOLS_ROOT
135
136#
137# Package creation variables.  You probably shouldn't change these,
138# either.
139#
140# PKGARCHIVE determines where repositories will be created.
141#
142# PKGPUBLISHER* control the publisher settings for those repositories.
143#
144PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly";	export PKGARCHIVE
145# PKGPUBLISHER_REDIST="on-redist";			export PKGPUBLISHER_REDIST
146# PKGPUBLISHER_NONREDIST="on-extra";			export PKGPUBLISHER_NONREDIST
147
148# we want make to do as much as it can, just in case there's more than
149# one problem.
150MAKEFLAGS=k;	export MAKEFLAGS
151
152# Magic variable to prevent the devpro compilers/teamware from sending
153# mail back to devpro on every use.
154UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING
155
156# Build tools - don't set these unless you know what you're doing.  These
157# variables allows you to get the compilers and onbld files locally or
158# through cachefs.  Set BUILD_TOOLS to pull everything from one location.
159# Alternately, you can set ONBLD_TOOLS to where you keep the contents of
160# SUNWonbld and SPRO_ROOT to where you keep the compilers.
161#
162#BUILD_TOOLS=/opt;				export BUILD_TOOLS
163#ONBLD_TOOLS=/opt/onbld;			export ONBLD_TOOLS
164#SPRO_ROOT=/opt/SUNWspro;			export SPRO_ROOT
165
166# This goes along with lint - it is a series of the form "A [y|n]" which
167# means "go to directory A and run 'make lint'" Then mail me (y) the
168# difference in the lint output. 'y' should only be used if the area you're
169# linting is actually lint clean or you'll get lots of mail.
170# You shouldn't need to change this though.
171#LINTDIRS="$SRC y";	export LINTDIRS
172
173#
174# Reference to IA32 IHV workspace, proto area and packages
175#
176#IA32_IHV_WS=/ws/${GATE}-ihv;				export IA32_IHV_WS
177#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386;		export IA32_IHV_ROOT
178#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly;	export IA32_IHV_PKGS
179
180#
181# Reference to binary-only IA32 IHV packages
182#
183#IA32_IHV_BINARY_PKGS=/ws/${GATE}-ihv-bin
184#export IA32_IHV_BINARY_PKGS
185
186# Set this flag to 'n' to disable the automatic validation of the dmake
187# version in use.  The default is to check it.
188#CHECK_DMAKE=y
189
190# Set this flag to 'n' to disable the use of 'checkpaths'.  The default,
191# if the 'N' option is not specified, is to run this test.
192#CHECK_PATHS=y
193
194# Set this flag to 'y' to enable the use of elfsigncmp to validate the
195# output of elfsign.  Doing so requires that 't' be set in NIGHTLY_OPTIONS.
196# The default is to not verify them.
197#VERIFY_ELFSIGN=n
198
199# BRINGOVER_FILES is the list of files nightly passes to bringover.
200# If not set the default is "usr", but it can be used for bringing
201# over deleted_files or other nifty directories.
202#BRINGOVER_FILES="usr deleted_files"
203
204# POST_NIGHTLY can be any command to be run at the end of nightly.  See
205# nightly(1) for interactions between environment variables and this command.
206#POST_NIGHTLY=
207