1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Xilinx Zynq MPSoC Firmware layer 4 * 5 * Copyright (C) 2014-2022 Xilinx, Inc. 6 * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc. 7 * 8 * Michal Simek <michal.simek@amd.com> 9 * Davorin Mista <davorin.mista@aggios.com> 10 * Jolly Shah <jollys@xilinx.com> 11 * Rajan Vaja <rajanv@xilinx.com> 12 */ 13 14#include <linux/arm-smccc.h> 15#include <linux/compiler.h> 16#include <linux/device.h> 17#include <linux/init.h> 18#include <linux/mfd/core.h> 19#include <linux/module.h> 20#include <linux/of.h> 21#include <linux/of_platform.h> 22#include <linux/platform_device.h> 23#include <linux/slab.h> 24#include <linux/uaccess.h> 25#include <linux/hashtable.h> 26 27#include <linux/firmware/xlnx-zynqmp.h> 28#include <linux/firmware/xlnx-event-manager.h> 29#include "zynqmp-debug.h" 30 31/* Max HashMap Order for PM API feature check (1<<7 = 128) */ 32#define PM_API_FEATURE_CHECK_MAX_ORDER 7 33 34/* CRL registers and bitfields */ 35#define CRL_APB_BASE 0xFF5E0000U 36/* BOOT_PIN_CTRL- Used to control the mode pins after boot */ 37#define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + (0x250U)) 38/* BOOT_PIN_CTRL_MASK- out_val[11:8], out_en[3:0] */ 39#define CRL_APB_BOOTPIN_CTRL_MASK 0xF0FU 40 41/* IOCTL/QUERY feature payload size */ 42#define FEATURE_PAYLOAD_SIZE 2 43 44/* Firmware feature check version mask */ 45#define FIRMWARE_VERSION_MASK GENMASK(15, 0) 46 47static bool feature_check_enabled; 48static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER); 49static u32 ioctl_features[FEATURE_PAYLOAD_SIZE]; 50static u32 query_features[FEATURE_PAYLOAD_SIZE]; 51 52static struct platform_device *em_dev; 53 54/** 55 * struct zynqmp_devinfo - Structure for Zynqmp device instance 56 * @dev: Device Pointer 57 * @feature_conf_id: Feature conf id 58 */ 59struct zynqmp_devinfo { 60 struct device *dev; 61 u32 feature_conf_id; 62}; 63 64/** 65 * struct pm_api_feature_data - PM API Feature data 66 * @pm_api_id: PM API Id, used as key to index into hashmap 67 * @feature_status: status of PM API feature: valid, invalid 68 * @hentry: hlist_node that hooks this entry into hashtable 69 */ 70struct pm_api_feature_data { 71 u32 pm_api_id; 72 int feature_status; 73 struct hlist_node hentry; 74}; 75 76static const struct mfd_cell firmware_devs[] = { 77 { 78 .name = "zynqmp_power_controller", 79 }, 80}; 81 82/** 83 * zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes 84 * @ret_status: PMUFW return code 85 * 86 * Return: corresponding Linux error code 87 */ 88static int zynqmp_pm_ret_code(u32 ret_status) 89{ 90 switch (ret_status) { 91 case XST_PM_SUCCESS: 92 case XST_PM_DOUBLE_REQ: 93 return 0; 94 case XST_PM_NO_FEATURE: 95 return -ENOTSUPP; 96 case XST_PM_INVALID_VERSION: 97 return -EOPNOTSUPP; 98 case XST_PM_NO_ACCESS: 99 return -EACCES; 100 case XST_PM_ABORT_SUSPEND: 101 return -ECANCELED; 102 case XST_PM_MULT_USER: 103 return -EUSERS; 104 case XST_PM_INTERNAL: 105 case XST_PM_CONFLICT: 106 case XST_PM_INVALID_NODE: 107 case XST_PM_INVALID_CRC: 108 default: 109 return -EINVAL; 110 } 111} 112 113static noinline int do_fw_call_fail(u32 *ret_payload, u32 num_args, ...) 114{ 115 return -ENODEV; 116} 117 118/* 119 * PM function call wrapper 120 * Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration 121 */ 122static int (*do_fw_call)(u32 *ret_payload, u32, ...) = do_fw_call_fail; 123 124/** 125 * do_fw_call_smc() - Call system-level platform management layer (SMC) 126 * @num_args: Number of variable arguments should be <= 8 127 * @ret_payload: Returned value array 128 * 129 * Invoke platform management function via SMC call (no hypervisor present). 130 * 131 * Return: Returns status, either success or error+reason 132 */ 133static noinline int do_fw_call_smc(u32 *ret_payload, u32 num_args, ...) 134{ 135 struct arm_smccc_res res; 136 u64 args[8] = {0}; 137 va_list arg_list; 138 u8 i; 139 140 if (num_args > 8) 141 return -EINVAL; 142 143 va_start(arg_list, num_args); 144 145 for (i = 0; i < num_args; i++) 146 args[i] = va_arg(arg_list, u64); 147 148 va_end(arg_list); 149 150 arm_smccc_smc(args[0], args[1], args[2], args[3], args[4], args[5], args[6], args[7], &res); 151 152 if (ret_payload) { 153 ret_payload[0] = lower_32_bits(res.a0); 154 ret_payload[1] = upper_32_bits(res.a0); 155 ret_payload[2] = lower_32_bits(res.a1); 156 ret_payload[3] = upper_32_bits(res.a1); 157 } 158 159 return zynqmp_pm_ret_code((enum pm_ret_status)res.a0); 160} 161 162/** 163 * do_fw_call_hvc() - Call system-level platform management layer (HVC) 164 * @num_args: Number of variable arguments should be <= 8 165 * @ret_payload: Returned value array 166 * 167 * Invoke platform management function via HVC 168 * HVC-based for communication through hypervisor 169 * (no direct communication with ATF). 170 * 171 * Return: Returns status, either success or error+reason 172 */ 173static noinline int do_fw_call_hvc(u32 *ret_payload, u32 num_args, ...) 174{ 175 struct arm_smccc_res res; 176 u64 args[8] = {0}; 177 va_list arg_list; 178 u8 i; 179 180 if (num_args > 8) 181 return -EINVAL; 182 183 va_start(arg_list, num_args); 184 185 for (i = 0; i < num_args; i++) 186 args[i] = va_arg(arg_list, u64); 187 188 va_end(arg_list); 189 190 arm_smccc_hvc(args[0], args[1], args[2], args[3], args[4], args[5], args[6], args[7], &res); 191 192 if (ret_payload) { 193 ret_payload[0] = lower_32_bits(res.a0); 194 ret_payload[1] = upper_32_bits(res.a0); 195 ret_payload[2] = lower_32_bits(res.a1); 196 ret_payload[3] = upper_32_bits(res.a1); 197 } 198 199 return zynqmp_pm_ret_code((enum pm_ret_status)res.a0); 200} 201 202static int __do_feature_check_call(const u32 api_id, u32 *ret_payload) 203{ 204 int ret; 205 u64 smc_arg[2]; 206 u32 module_id; 207 u32 feature_check_api_id; 208 209 module_id = FIELD_GET(MODULE_ID_MASK, api_id); 210 211 /* 212 * Feature check of APIs belonging to PM, XSEM, and TF-A are handled by calling 213 * PM_FEATURE_CHECK API. For other modules, call PM_API_FEATURES API. 214 */ 215 if (module_id == PM_MODULE_ID || module_id == XSEM_MODULE_ID || module_id == TF_A_MODULE_ID) 216 feature_check_api_id = PM_FEATURE_CHECK; 217 else 218 feature_check_api_id = PM_API_FEATURES; 219 220 /* 221 * Feature check of TF-A APIs is done in the TF-A layer and it expects for 222 * MODULE_ID_MASK bits of SMC's arg[0] to be the same as PM_MODULE_ID. 223 */ 224 if (module_id == TF_A_MODULE_ID) 225 module_id = PM_MODULE_ID; 226 227 smc_arg[0] = PM_SIP_SVC | FIELD_PREP(MODULE_ID_MASK, module_id) | feature_check_api_id; 228 smc_arg[1] = (api_id & API_ID_MASK); 229 230 ret = do_fw_call(ret_payload, 2, smc_arg[0], smc_arg[1]); 231 if (ret) 232 ret = -EOPNOTSUPP; 233 else 234 ret = ret_payload[1]; 235 236 return ret; 237} 238 239static int do_feature_check_call(const u32 api_id) 240{ 241 int ret; 242 u32 ret_payload[PAYLOAD_ARG_CNT]; 243 struct pm_api_feature_data *feature_data; 244 245 /* Check for existing entry in hash table for given api */ 246 hash_for_each_possible(pm_api_features_map, feature_data, hentry, 247 api_id) { 248 if (feature_data->pm_api_id == api_id) 249 return feature_data->feature_status; 250 } 251 252 /* Add new entry if not present */ 253 feature_data = kmalloc(sizeof(*feature_data), GFP_ATOMIC); 254 if (!feature_data) 255 return -ENOMEM; 256 257 feature_data->pm_api_id = api_id; 258 ret = __do_feature_check_call(api_id, ret_payload); 259 260 feature_data->feature_status = ret; 261 hash_add(pm_api_features_map, &feature_data->hentry, api_id); 262 263 if (api_id == PM_IOCTL) 264 /* Store supported IOCTL IDs mask */ 265 memcpy(ioctl_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4); 266 else if (api_id == PM_QUERY_DATA) 267 /* Store supported QUERY IDs mask */ 268 memcpy(query_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4); 269 270 return ret; 271} 272 273/** 274 * zynqmp_pm_feature() - Check whether given feature is supported or not and 275 * store supported IOCTL/QUERY ID mask 276 * @api_id: API ID to check 277 * 278 * Return: Returns status, either success or error+reason 279 */ 280int zynqmp_pm_feature(const u32 api_id) 281{ 282 int ret; 283 284 if (!feature_check_enabled) 285 return 0; 286 287 ret = do_feature_check_call(api_id); 288 289 return ret; 290} 291EXPORT_SYMBOL_GPL(zynqmp_pm_feature); 292 293/** 294 * zynqmp_pm_is_function_supported() - Check whether given IOCTL/QUERY function 295 * is supported or not 296 * @api_id: PM_IOCTL or PM_QUERY_DATA 297 * @id: IOCTL or QUERY function IDs 298 * 299 * Return: Returns status, either success or error+reason 300 */ 301int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id) 302{ 303 int ret; 304 u32 *bit_mask; 305 306 /* Input arguments validation */ 307 if (id >= 64 || (api_id != PM_IOCTL && api_id != PM_QUERY_DATA)) 308 return -EINVAL; 309 310 /* Check feature check API version */ 311 ret = do_feature_check_call(PM_FEATURE_CHECK); 312 if (ret < 0) 313 return ret; 314 315 /* Check if feature check version 2 is supported or not */ 316 if ((ret & FIRMWARE_VERSION_MASK) == PM_API_VERSION_2) { 317 /* 318 * Call feature check for IOCTL/QUERY API to get IOCTL ID or 319 * QUERY ID feature status. 320 */ 321 ret = do_feature_check_call(api_id); 322 if (ret < 0) 323 return ret; 324 325 bit_mask = (api_id == PM_IOCTL) ? ioctl_features : query_features; 326 327 if ((bit_mask[(id / 32)] & BIT((id % 32))) == 0U) 328 return -EOPNOTSUPP; 329 } else { 330 return -ENODATA; 331 } 332 333 return 0; 334} 335EXPORT_SYMBOL_GPL(zynqmp_pm_is_function_supported); 336 337/** 338 * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer 339 * caller function depending on the configuration 340 * @pm_api_id: Requested PM-API call 341 * @ret_payload: Returned value array 342 * @num_args: Number of arguments to requested PM-API call 343 * 344 * Invoke platform management function for SMC or HVC call, depending on 345 * configuration. 346 * Following SMC Calling Convention (SMCCC) for SMC64: 347 * Pm Function Identifier, 348 * PM_SIP_SVC + PM_API_ID = 349 * ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT) 350 * ((SMC_64) << FUNCID_CC_SHIFT) 351 * ((SIP_START) << FUNCID_OEN_SHIFT) 352 * ((PM_API_ID) & FUNCID_NUM_MASK)) 353 * 354 * PM_SIP_SVC - Registered ZynqMP SIP Service Call. 355 * PM_API_ID - Platform Management API ID. 356 * 357 * Return: Returns status, either success or error+reason 358 */ 359int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 *ret_payload, u32 num_args, ...) 360{ 361 /* 362 * Added SIP service call Function Identifier 363 * Make sure to stay in x0 register 364 */ 365 u64 smc_arg[8]; 366 int ret, i; 367 va_list arg_list; 368 u32 args[14] = {0}; 369 370 if (num_args > 14) 371 return -EINVAL; 372 373 va_start(arg_list, num_args); 374 375 /* Check if feature is supported or not */ 376 ret = zynqmp_pm_feature(pm_api_id); 377 if (ret < 0) 378 return ret; 379 380 for (i = 0; i < num_args; i++) 381 args[i] = va_arg(arg_list, u32); 382 383 va_end(arg_list); 384 385 smc_arg[0] = PM_SIP_SVC | pm_api_id; 386 for (i = 0; i < 7; i++) 387 smc_arg[i + 1] = ((u64)args[(i * 2) + 1] << 32) | args[i * 2]; 388 389 return do_fw_call(ret_payload, 8, smc_arg[0], smc_arg[1], smc_arg[2], smc_arg[3], 390 smc_arg[4], smc_arg[5], smc_arg[6], smc_arg[7]); 391} 392 393static u32 pm_api_version; 394static u32 pm_tz_version; 395static u32 pm_family_code; 396static u32 pm_sub_family_code; 397 398int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset) 399{ 400 int ret; 401 402 ret = zynqmp_pm_invoke_fn(TF_A_PM_REGISTER_SGI, NULL, 2, sgi_num, reset); 403 if (ret != -EOPNOTSUPP && !ret) 404 return ret; 405 406 /* try old implementation as fallback strategy if above fails */ 407 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 3, IOCTL_REGISTER_SGI, sgi_num, reset); 408} 409 410/** 411 * zynqmp_pm_get_api_version() - Get version number of PMU PM firmware 412 * @version: Returned version value 413 * 414 * Return: Returns status, either success or error+reason 415 */ 416int zynqmp_pm_get_api_version(u32 *version) 417{ 418 u32 ret_payload[PAYLOAD_ARG_CNT]; 419 int ret; 420 421 if (!version) 422 return -EINVAL; 423 424 /* Check is PM API version already verified */ 425 if (pm_api_version > 0) { 426 *version = pm_api_version; 427 return 0; 428 } 429 ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, ret_payload, 0); 430 *version = ret_payload[1]; 431 432 return ret; 433} 434EXPORT_SYMBOL_GPL(zynqmp_pm_get_api_version); 435 436/** 437 * zynqmp_pm_get_chipid - Get silicon ID registers 438 * @idcode: IDCODE register 439 * @version: version register 440 * 441 * Return: Returns the status of the operation and the idcode and version 442 * registers in @idcode and @version. 443 */ 444int zynqmp_pm_get_chipid(u32 *idcode, u32 *version) 445{ 446 u32 ret_payload[PAYLOAD_ARG_CNT]; 447 int ret; 448 449 if (!idcode || !version) 450 return -EINVAL; 451 452 ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, ret_payload, 0); 453 *idcode = ret_payload[1]; 454 *version = ret_payload[2]; 455 456 return ret; 457} 458EXPORT_SYMBOL_GPL(zynqmp_pm_get_chipid); 459 460/** 461 * zynqmp_pm_get_family_info() - Get family info of platform 462 * @family: Returned family code value 463 * @subfamily: Returned sub-family code value 464 * 465 * Return: Returns status, either success or error+reason 466 */ 467int zynqmp_pm_get_family_info(u32 *family, u32 *subfamily) 468{ 469 u32 ret_payload[PAYLOAD_ARG_CNT]; 470 u32 idcode; 471 int ret; 472 473 /* Check is family or sub-family code already received */ 474 if (pm_family_code && pm_sub_family_code) { 475 *family = pm_family_code; 476 *subfamily = pm_sub_family_code; 477 return 0; 478 } 479 480 ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, ret_payload, 0); 481 if (ret < 0) 482 return ret; 483 484 idcode = ret_payload[1]; 485 pm_family_code = FIELD_GET(FAMILY_CODE_MASK, idcode); 486 pm_sub_family_code = FIELD_GET(SUB_FAMILY_CODE_MASK, idcode); 487 *family = pm_family_code; 488 *subfamily = pm_sub_family_code; 489 490 return 0; 491} 492EXPORT_SYMBOL_GPL(zynqmp_pm_get_family_info); 493 494/** 495 * zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version 496 * @version: Returned version value 497 * 498 * Return: Returns status, either success or error+reason 499 */ 500static int zynqmp_pm_get_trustzone_version(u32 *version) 501{ 502 u32 ret_payload[PAYLOAD_ARG_CNT]; 503 int ret; 504 505 if (!version) 506 return -EINVAL; 507 508 /* Check is PM trustzone version already verified */ 509 if (pm_tz_version > 0) { 510 *version = pm_tz_version; 511 return 0; 512 } 513 ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, ret_payload, 0); 514 *version = ret_payload[1]; 515 516 return ret; 517} 518 519/** 520 * get_set_conduit_method() - Choose SMC or HVC based communication 521 * @np: Pointer to the device_node structure 522 * 523 * Use SMC or HVC-based functions to communicate with EL2/EL3. 524 * 525 * Return: Returns 0 on success or error code 526 */ 527static int get_set_conduit_method(struct device_node *np) 528{ 529 const char *method; 530 531 if (of_property_read_string(np, "method", &method)) { 532 pr_warn("%s missing \"method\" property\n", __func__); 533 return -ENXIO; 534 } 535 536 if (!strcmp("hvc", method)) { 537 do_fw_call = do_fw_call_hvc; 538 } else if (!strcmp("smc", method)) { 539 do_fw_call = do_fw_call_smc; 540 } else { 541 pr_warn("%s Invalid \"method\" property: %s\n", 542 __func__, method); 543 return -EINVAL; 544 } 545 546 return 0; 547} 548 549/** 550 * zynqmp_pm_query_data() - Get query data from firmware 551 * @qdata: Variable to the zynqmp_pm_query_data structure 552 * @out: Returned output value 553 * 554 * Return: Returns status, either success or error+reason 555 */ 556int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out) 557{ 558 int ret; 559 560 ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, out, 4, qdata.qid, qdata.arg1, qdata.arg2, 561 qdata.arg3); 562 563 /* 564 * For clock name query, all bytes in SMC response are clock name 565 * characters and return code is always success. For invalid clocks, 566 * clock name bytes would be zeros. 567 */ 568 return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret; 569} 570EXPORT_SYMBOL_GPL(zynqmp_pm_query_data); 571 572/** 573 * zynqmp_pm_clock_enable() - Enable the clock for given id 574 * @clock_id: ID of the clock to be enabled 575 * 576 * This function is used by master to enable the clock 577 * including peripherals and PLL clocks. 578 * 579 * Return: Returns status, either success or error+reason 580 */ 581int zynqmp_pm_clock_enable(u32 clock_id) 582{ 583 return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, NULL, 1, clock_id); 584} 585EXPORT_SYMBOL_GPL(zynqmp_pm_clock_enable); 586 587/** 588 * zynqmp_pm_clock_disable() - Disable the clock for given id 589 * @clock_id: ID of the clock to be disable 590 * 591 * This function is used by master to disable the clock 592 * including peripherals and PLL clocks. 593 * 594 * Return: Returns status, either success or error+reason 595 */ 596int zynqmp_pm_clock_disable(u32 clock_id) 597{ 598 return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, NULL, 1, clock_id); 599} 600EXPORT_SYMBOL_GPL(zynqmp_pm_clock_disable); 601 602/** 603 * zynqmp_pm_clock_getstate() - Get the clock state for given id 604 * @clock_id: ID of the clock to be queried 605 * @state: 1/0 (Enabled/Disabled) 606 * 607 * This function is used by master to get the state of clock 608 * including peripherals and PLL clocks. 609 * 610 * Return: Returns status, either success or error+reason 611 */ 612int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state) 613{ 614 u32 ret_payload[PAYLOAD_ARG_CNT]; 615 int ret; 616 617 ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, ret_payload, 1, clock_id); 618 *state = ret_payload[1]; 619 620 return ret; 621} 622EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getstate); 623 624/** 625 * zynqmp_pm_clock_setdivider() - Set the clock divider for given id 626 * @clock_id: ID of the clock 627 * @divider: divider value 628 * 629 * This function is used by master to set divider for any clock 630 * to achieve desired rate. 631 * 632 * Return: Returns status, either success or error+reason 633 */ 634int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider) 635{ 636 return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, NULL, 2, clock_id, divider); 637} 638EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setdivider); 639 640/** 641 * zynqmp_pm_clock_getdivider() - Get the clock divider for given id 642 * @clock_id: ID of the clock 643 * @divider: divider value 644 * 645 * This function is used by master to get divider values 646 * for any clock. 647 * 648 * Return: Returns status, either success or error+reason 649 */ 650int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider) 651{ 652 u32 ret_payload[PAYLOAD_ARG_CNT]; 653 int ret; 654 655 ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, ret_payload, 1, clock_id); 656 *divider = ret_payload[1]; 657 658 return ret; 659} 660EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getdivider); 661 662/** 663 * zynqmp_pm_clock_setparent() - Set the clock parent for given id 664 * @clock_id: ID of the clock 665 * @parent_id: parent id 666 * 667 * This function is used by master to set parent for any clock. 668 * 669 * Return: Returns status, either success or error+reason 670 */ 671int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id) 672{ 673 return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, NULL, 2, clock_id, parent_id); 674} 675EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setparent); 676 677/** 678 * zynqmp_pm_clock_getparent() - Get the clock parent for given id 679 * @clock_id: ID of the clock 680 * @parent_id: parent id 681 * 682 * This function is used by master to get parent index 683 * for any clock. 684 * 685 * Return: Returns status, either success or error+reason 686 */ 687int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id) 688{ 689 u32 ret_payload[PAYLOAD_ARG_CNT]; 690 int ret; 691 692 ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, ret_payload, 1, clock_id); 693 *parent_id = ret_payload[1]; 694 695 return ret; 696} 697EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getparent); 698 699/** 700 * zynqmp_pm_set_pll_frac_mode() - PM API for set PLL mode 701 * 702 * @clk_id: PLL clock ID 703 * @mode: PLL mode (PLL_MODE_FRAC/PLL_MODE_INT) 704 * 705 * This function sets PLL mode 706 * 707 * Return: Returns status, either success or error+reason 708 */ 709int zynqmp_pm_set_pll_frac_mode(u32 clk_id, u32 mode) 710{ 711 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, 0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode); 712} 713EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_mode); 714 715/** 716 * zynqmp_pm_get_pll_frac_mode() - PM API for get PLL mode 717 * 718 * @clk_id: PLL clock ID 719 * @mode: PLL mode 720 * 721 * This function return current PLL mode 722 * 723 * Return: Returns status, either success or error+reason 724 */ 725int zynqmp_pm_get_pll_frac_mode(u32 clk_id, u32 *mode) 726{ 727 return zynqmp_pm_invoke_fn(PM_IOCTL, mode, 3, 0, IOCTL_GET_PLL_FRAC_MODE, clk_id); 728} 729EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_mode); 730 731/** 732 * zynqmp_pm_set_pll_frac_data() - PM API for setting pll fraction data 733 * 734 * @clk_id: PLL clock ID 735 * @data: fraction data 736 * 737 * This function sets fraction data. 738 * It is valid for fraction mode only. 739 * 740 * Return: Returns status, either success or error+reason 741 */ 742int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data) 743{ 744 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, 0, IOCTL_SET_PLL_FRAC_DATA, clk_id, data); 745} 746EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_data); 747 748/** 749 * zynqmp_pm_get_pll_frac_data() - PM API for getting pll fraction data 750 * 751 * @clk_id: PLL clock ID 752 * @data: fraction data 753 * 754 * This function returns fraction data value. 755 * 756 * Return: Returns status, either success or error+reason 757 */ 758int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data) 759{ 760 return zynqmp_pm_invoke_fn(PM_IOCTL, data, 3, 0, IOCTL_GET_PLL_FRAC_DATA, clk_id); 761} 762EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data); 763 764/** 765 * zynqmp_pm_set_sd_tapdelay() - Set tap delay for the SD device 766 * 767 * @node_id: Node ID of the device 768 * @type: Type of tap delay to set (input/output) 769 * @value: Value to set fot the tap delay 770 * 771 * This function sets input/output tap delay for the SD device. 772 * 773 * Return: Returns status, either success or error+reason 774 */ 775int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value) 776{ 777 u32 reg = (type == PM_TAPDELAY_INPUT) ? SD_ITAPDLY : SD_OTAPDLYSEL; 778 u32 mask = (node_id == NODE_SD_0) ? GENMASK(15, 0) : GENMASK(31, 16); 779 780 if (value) { 781 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, node_id, IOCTL_SET_SD_TAPDELAY, type, 782 value); 783 } 784 785 /* 786 * Work around completely misdesigned firmware API on Xilinx ZynqMP. 787 * The IOCTL_SET_SD_TAPDELAY firmware call allows the caller to only 788 * ever set IOU_SLCR SD_ITAPDLY Register SD0_ITAPDLYENA/SD1_ITAPDLYENA 789 * bits, but there is no matching call to clear those bits. If those 790 * bits are not cleared, SDMMC tuning may fail. 791 * 792 * Luckily, there are PM_MMIO_READ/PM_MMIO_WRITE calls which seem to 793 * allow complete unrestricted access to all address space, including 794 * IOU_SLCR SD_ITAPDLY Register and all the other registers, access 795 * to which was supposed to be protected by the current firmware API. 796 * 797 * Use PM_MMIO_READ/PM_MMIO_WRITE to re-implement the missing counter 798 * part of IOCTL_SET_SD_TAPDELAY which clears SDx_ITAPDLYENA bits. 799 */ 800 return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, NULL, 2, reg, mask); 801} 802EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay); 803 804/** 805 * zynqmp_pm_sd_dll_reset() - Reset DLL logic 806 * 807 * @node_id: Node ID of the device 808 * @type: Reset type 809 * 810 * This function resets DLL logic for the SD device. 811 * 812 * Return: Returns status, either success or error+reason 813 */ 814int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type) 815{ 816 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 3, node_id, IOCTL_SD_DLL_RESET, type); 817} 818EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset); 819 820/** 821 * zynqmp_pm_ospi_mux_select() - OSPI Mux selection 822 * 823 * @dev_id: Device Id of the OSPI device. 824 * @select: OSPI Mux select value. 825 * 826 * This function select the OSPI Mux. 827 * 828 * Return: Returns status, either success or error+reason 829 */ 830int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select) 831{ 832 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 3, dev_id, IOCTL_OSPI_MUX_SELECT, select); 833} 834EXPORT_SYMBOL_GPL(zynqmp_pm_ospi_mux_select); 835 836/** 837 * zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs) 838 * @index: GGS register index 839 * @value: Register value to be written 840 * 841 * This function writes value to GGS register. 842 * 843 * Return: Returns status, either success or error+reason 844 */ 845int zynqmp_pm_write_ggs(u32 index, u32 value) 846{ 847 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, 0, IOCTL_WRITE_GGS, index, value); 848} 849EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs); 850 851/** 852 * zynqmp_pm_read_ggs() - PM API for reading global general storage (ggs) 853 * @index: GGS register index 854 * @value: Register value to be written 855 * 856 * This function returns GGS register value. 857 * 858 * Return: Returns status, either success or error+reason 859 */ 860int zynqmp_pm_read_ggs(u32 index, u32 *value) 861{ 862 return zynqmp_pm_invoke_fn(PM_IOCTL, value, 3, 0, IOCTL_READ_GGS, index); 863} 864EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs); 865 866/** 867 * zynqmp_pm_write_pggs() - PM API for writing persistent global general 868 * storage (pggs) 869 * @index: PGGS register index 870 * @value: Register value to be written 871 * 872 * This function writes value to PGGS register. 873 * 874 * Return: Returns status, either success or error+reason 875 */ 876int zynqmp_pm_write_pggs(u32 index, u32 value) 877{ 878 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, 0, IOCTL_WRITE_PGGS, index, value); 879} 880EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs); 881 882/** 883 * zynqmp_pm_read_pggs() - PM API for reading persistent global general 884 * storage (pggs) 885 * @index: PGGS register index 886 * @value: Register value to be written 887 * 888 * This function returns PGGS register value. 889 * 890 * Return: Returns status, either success or error+reason 891 */ 892int zynqmp_pm_read_pggs(u32 index, u32 *value) 893{ 894 return zynqmp_pm_invoke_fn(PM_IOCTL, value, 3, 0, IOCTL_READ_PGGS, index); 895} 896EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs); 897 898int zynqmp_pm_set_tapdelay_bypass(u32 index, u32 value) 899{ 900 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, 0, IOCTL_SET_TAPDELAY_BYPASS, index, value); 901} 902EXPORT_SYMBOL_GPL(zynqmp_pm_set_tapdelay_bypass); 903 904/** 905 * zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status 906 * @value: Status value to be written 907 * 908 * This function sets healthy bit value to indicate boot health status 909 * to firmware. 910 * 911 * Return: Returns status, either success or error+reason 912 */ 913int zynqmp_pm_set_boot_health_status(u32 value) 914{ 915 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 3, 0, IOCTL_SET_BOOT_HEALTH_STATUS, value); 916} 917 918/** 919 * zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release) 920 * @reset: Reset to be configured 921 * @assert_flag: Flag stating should reset be asserted (1) or 922 * released (0) 923 * 924 * Return: Returns status, either success or error+reason 925 */ 926int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset, 927 const enum zynqmp_pm_reset_action assert_flag) 928{ 929 return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, NULL, 2, reset, assert_flag); 930} 931EXPORT_SYMBOL_GPL(zynqmp_pm_reset_assert); 932 933/** 934 * zynqmp_pm_reset_get_status - Get status of the reset 935 * @reset: Reset whose status should be returned 936 * @status: Returned status 937 * 938 * Return: Returns status, either success or error+reason 939 */ 940int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status) 941{ 942 u32 ret_payload[PAYLOAD_ARG_CNT]; 943 int ret; 944 945 if (!status) 946 return -EINVAL; 947 948 ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, ret_payload, 1, reset); 949 *status = ret_payload[1]; 950 951 return ret; 952} 953EXPORT_SYMBOL_GPL(zynqmp_pm_reset_get_status); 954 955/** 956 * zynqmp_pm_fpga_load - Perform the fpga load 957 * @address: Address to write to 958 * @size: pl bitstream size 959 * @flags: Bitstream type 960 * -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration 961 * -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration 962 * 963 * This function provides access to pmufw. To transfer 964 * the required bitstream into PL. 965 * 966 * Return: Returns status, either success or error+reason 967 */ 968int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags) 969{ 970 u32 ret_payload[PAYLOAD_ARG_CNT]; 971 int ret; 972 973 ret = zynqmp_pm_invoke_fn(PM_FPGA_LOAD, ret_payload, 4, lower_32_bits(address), 974 upper_32_bits(address), size, flags); 975 if (ret_payload[0]) 976 return -ret_payload[0]; 977 978 return ret; 979} 980EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_load); 981 982/** 983 * zynqmp_pm_fpga_get_status - Read value from PCAP status register 984 * @value: Value to read 985 * 986 * This function provides access to the pmufw to get the PCAP 987 * status 988 * 989 * Return: Returns status, either success or error+reason 990 */ 991int zynqmp_pm_fpga_get_status(u32 *value) 992{ 993 u32 ret_payload[PAYLOAD_ARG_CNT]; 994 int ret; 995 996 if (!value) 997 return -EINVAL; 998 999 ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, ret_payload, 0); 1000 *value = ret_payload[1]; 1001 1002 return ret; 1003} 1004EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status); 1005 1006/** 1007 * zynqmp_pm_fpga_get_config_status - Get the FPGA configuration status. 1008 * @value: Buffer to store FPGA configuration status. 1009 * 1010 * This function provides access to the pmufw to get the FPGA configuration 1011 * status 1012 * 1013 * Return: 0 on success, a negative value on error 1014 */ 1015int zynqmp_pm_fpga_get_config_status(u32 *value) 1016{ 1017 u32 ret_payload[PAYLOAD_ARG_CNT]; 1018 u32 buf, lower_addr, upper_addr; 1019 int ret; 1020 1021 if (!value) 1022 return -EINVAL; 1023 1024 lower_addr = lower_32_bits((u64)&buf); 1025 upper_addr = upper_32_bits((u64)&buf); 1026 1027 ret = zynqmp_pm_invoke_fn(PM_FPGA_READ, ret_payload, 4, 1028 XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET, lower_addr, upper_addr, 1029 XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG); 1030 1031 *value = ret_payload[1]; 1032 1033 return ret; 1034} 1035EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_config_status); 1036 1037/** 1038 * zynqmp_pm_pinctrl_request - Request Pin from firmware 1039 * @pin: Pin number to request 1040 * 1041 * This function requests pin from firmware. 1042 * 1043 * Return: Returns status, either success or error+reason. 1044 */ 1045int zynqmp_pm_pinctrl_request(const u32 pin) 1046{ 1047 return zynqmp_pm_invoke_fn(PM_PINCTRL_REQUEST, NULL, 1, pin); 1048} 1049EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_request); 1050 1051/** 1052 * zynqmp_pm_pinctrl_release - Inform firmware that Pin control is released 1053 * @pin: Pin number to release 1054 * 1055 * This function release pin from firmware. 1056 * 1057 * Return: Returns status, either success or error+reason. 1058 */ 1059int zynqmp_pm_pinctrl_release(const u32 pin) 1060{ 1061 return zynqmp_pm_invoke_fn(PM_PINCTRL_RELEASE, NULL, 1, pin); 1062} 1063EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_release); 1064 1065/** 1066 * zynqmp_pm_pinctrl_set_function - Set requested function for the pin 1067 * @pin: Pin number 1068 * @id: Function ID to set 1069 * 1070 * This function sets requested function for the given pin. 1071 * 1072 * Return: Returns status, either success or error+reason. 1073 */ 1074int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id) 1075{ 1076 return zynqmp_pm_invoke_fn(PM_PINCTRL_SET_FUNCTION, NULL, 2, pin, id); 1077} 1078EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_function); 1079 1080/** 1081 * zynqmp_pm_pinctrl_get_config - Get configuration parameter for the pin 1082 * @pin: Pin number 1083 * @param: Parameter to get 1084 * @value: Buffer to store parameter value 1085 * 1086 * This function gets requested configuration parameter for the given pin. 1087 * 1088 * Return: Returns status, either success or error+reason. 1089 */ 1090int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param, 1091 u32 *value) 1092{ 1093 u32 ret_payload[PAYLOAD_ARG_CNT]; 1094 int ret; 1095 1096 if (!value) 1097 return -EINVAL; 1098 1099 ret = zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_GET, ret_payload, 2, pin, param); 1100 *value = ret_payload[1]; 1101 1102 return ret; 1103} 1104EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_config); 1105 1106/** 1107 * zynqmp_pm_pinctrl_set_config - Set configuration parameter for the pin 1108 * @pin: Pin number 1109 * @param: Parameter to set 1110 * @value: Parameter value to set 1111 * 1112 * This function sets requested configuration parameter for the given pin. 1113 * 1114 * Return: Returns status, either success or error+reason. 1115 */ 1116int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param, 1117 u32 value) 1118{ 1119 int ret; 1120 1121 if (pm_family_code == ZYNQMP_FAMILY_CODE && 1122 param == PM_PINCTRL_CONFIG_TRI_STATE) { 1123 ret = zynqmp_pm_feature(PM_PINCTRL_CONFIG_PARAM_SET); 1124 if (ret < PM_PINCTRL_PARAM_SET_VERSION) 1125 return -EOPNOTSUPP; 1126 } 1127 1128 return zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_SET, NULL, 3, pin, param, value); 1129} 1130EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config); 1131 1132/** 1133 * zynqmp_pm_bootmode_read() - PM Config API for read bootpin status 1134 * @ps_mode: Returned output value of ps_mode 1135 * 1136 * This API function is to be used for notify the power management controller 1137 * to read bootpin status. 1138 * 1139 * Return: status, either success or error+reason 1140 */ 1141unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode) 1142{ 1143 unsigned int ret; 1144 u32 ret_payload[PAYLOAD_ARG_CNT]; 1145 1146 ret = zynqmp_pm_invoke_fn(PM_MMIO_READ, ret_payload, 1, CRL_APB_BOOT_PIN_CTRL); 1147 1148 *ps_mode = ret_payload[1]; 1149 1150 return ret; 1151} 1152EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_read); 1153 1154/** 1155 * zynqmp_pm_bootmode_write() - PM Config API for Configure bootpin 1156 * @ps_mode: Value to be written to the bootpin ctrl register 1157 * 1158 * This API function is to be used for notify the power management controller 1159 * to configure bootpin. 1160 * 1161 * Return: Returns status, either success or error+reason 1162 */ 1163int zynqmp_pm_bootmode_write(u32 ps_mode) 1164{ 1165 return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, NULL, 3, CRL_APB_BOOT_PIN_CTRL, 1166 CRL_APB_BOOTPIN_CTRL_MASK, ps_mode); 1167} 1168EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_write); 1169 1170/** 1171 * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller 1172 * master has initialized its own power management 1173 * 1174 * Return: Returns status, either success or error+reason 1175 * 1176 * This API function is to be used for notify the power management controller 1177 * about the completed power management initialization. 1178 */ 1179int zynqmp_pm_init_finalize(void) 1180{ 1181 return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, NULL, 0); 1182} 1183EXPORT_SYMBOL_GPL(zynqmp_pm_init_finalize); 1184 1185/** 1186 * zynqmp_pm_set_suspend_mode() - Set system suspend mode 1187 * @mode: Mode to set for system suspend 1188 * 1189 * This API function is used to set mode of system suspend. 1190 * 1191 * Return: Returns status, either success or error+reason 1192 */ 1193int zynqmp_pm_set_suspend_mode(u32 mode) 1194{ 1195 return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, NULL, 1, mode); 1196} 1197EXPORT_SYMBOL_GPL(zynqmp_pm_set_suspend_mode); 1198 1199/** 1200 * zynqmp_pm_request_node() - Request a node with specific capabilities 1201 * @node: Node ID of the slave 1202 * @capabilities: Requested capabilities of the slave 1203 * @qos: Quality of service (not supported) 1204 * @ack: Flag to specify whether acknowledge is requested 1205 * 1206 * This function is used by master to request particular node from firmware. 1207 * Every master must request node before using it. 1208 * 1209 * Return: Returns status, either success or error+reason 1210 */ 1211int zynqmp_pm_request_node(const u32 node, const u32 capabilities, 1212 const u32 qos, const enum zynqmp_pm_request_ack ack) 1213{ 1214 return zynqmp_pm_invoke_fn(PM_REQUEST_NODE, NULL, 4, node, capabilities, qos, ack); 1215} 1216EXPORT_SYMBOL_GPL(zynqmp_pm_request_node); 1217 1218/** 1219 * zynqmp_pm_release_node() - Release a node 1220 * @node: Node ID of the slave 1221 * 1222 * This function is used by master to inform firmware that master 1223 * has released node. Once released, master must not use that node 1224 * without re-request. 1225 * 1226 * Return: Returns status, either success or error+reason 1227 */ 1228int zynqmp_pm_release_node(const u32 node) 1229{ 1230 return zynqmp_pm_invoke_fn(PM_RELEASE_NODE, NULL, 1, node); 1231} 1232EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); 1233 1234/** 1235 * zynqmp_pm_get_rpu_mode() - Get RPU mode 1236 * @node_id: Node ID of the device 1237 * @rpu_mode: return by reference value 1238 * either split or lockstep 1239 * 1240 * Return: return 0 on success or error+reason. 1241 * if success, then rpu_mode will be set 1242 * to current rpu mode. 1243 */ 1244int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode) 1245{ 1246 u32 ret_payload[PAYLOAD_ARG_CNT]; 1247 int ret; 1248 1249 ret = zynqmp_pm_invoke_fn(PM_IOCTL, ret_payload, 2, node_id, IOCTL_GET_RPU_OPER_MODE); 1250 1251 /* only set rpu_mode if no error */ 1252 if (ret == XST_PM_SUCCESS) 1253 *rpu_mode = ret_payload[0]; 1254 1255 return ret; 1256} 1257EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode); 1258 1259/** 1260 * zynqmp_pm_set_rpu_mode() - Set RPU mode 1261 * @node_id: Node ID of the device 1262 * @rpu_mode: Argument 1 to requested IOCTL call. either split or lockstep 1263 * 1264 * This function is used to set RPU mode to split or 1265 * lockstep 1266 * 1267 * Return: Returns status, either success or error+reason 1268 */ 1269int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode) 1270{ 1271 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 3, node_id, IOCTL_SET_RPU_OPER_MODE, 1272 (u32)rpu_mode); 1273} 1274EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode); 1275 1276/** 1277 * zynqmp_pm_set_tcm_config - configure TCM 1278 * @node_id: Firmware specific TCM subsystem ID 1279 * @tcm_mode: Argument 1 to requested IOCTL call 1280 * either PM_RPU_TCM_COMB or PM_RPU_TCM_SPLIT 1281 * 1282 * This function is used to set RPU mode to split or combined 1283 * 1284 * Return: status: 0 for success, else failure 1285 */ 1286int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode) 1287{ 1288 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 3, node_id, IOCTL_TCM_COMB_CONFIG, 1289 (u32)tcm_mode); 1290} 1291EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config); 1292 1293/** 1294 * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to 1295 * be powered down forcefully 1296 * @node: Node ID of the targeted PU or subsystem 1297 * @ack: Flag to specify whether acknowledge is requested 1298 * 1299 * Return: status, either success or error+reason 1300 */ 1301int zynqmp_pm_force_pwrdwn(const u32 node, 1302 const enum zynqmp_pm_request_ack ack) 1303{ 1304 return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, NULL, 2, node, ack); 1305} 1306EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn); 1307 1308/** 1309 * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem 1310 * @node: Node ID of the master or subsystem 1311 * @set_addr: Specifies whether the address argument is relevant 1312 * @address: Address from which to resume when woken up 1313 * @ack: Flag to specify whether acknowledge requested 1314 * 1315 * Return: status, either success or error+reason 1316 */ 1317int zynqmp_pm_request_wake(const u32 node, 1318 const bool set_addr, 1319 const u64 address, 1320 const enum zynqmp_pm_request_ack ack) 1321{ 1322 /* set_addr flag is encoded into 1st bit of address */ 1323 return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, NULL, 4, node, address | set_addr, 1324 address >> 32, ack); 1325} 1326EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake); 1327 1328/** 1329 * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves 1330 * @node: Node ID of the slave 1331 * @capabilities: Requested capabilities of the slave 1332 * @qos: Quality of service (not supported) 1333 * @ack: Flag to specify whether acknowledge is requested 1334 * 1335 * This API function is to be used for slaves a PU already has requested 1336 * to change its capabilities. 1337 * 1338 * Return: Returns status, either success or error+reason 1339 */ 1340int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities, 1341 const u32 qos, 1342 const enum zynqmp_pm_request_ack ack) 1343{ 1344 return zynqmp_pm_invoke_fn(PM_SET_REQUIREMENT, NULL, 4, node, capabilities, qos, ack); 1345} 1346EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement); 1347 1348/** 1349 * zynqmp_pm_load_pdi - Load and process PDI 1350 * @src: Source device where PDI is located 1351 * @address: PDI src address 1352 * 1353 * This function provides support to load PDI from linux 1354 * 1355 * Return: Returns status, either success or error+reason 1356 */ 1357int zynqmp_pm_load_pdi(const u32 src, const u64 address) 1358{ 1359 return zynqmp_pm_invoke_fn(PM_LOAD_PDI, NULL, 3, src, lower_32_bits(address), 1360 upper_32_bits(address)); 1361} 1362EXPORT_SYMBOL_GPL(zynqmp_pm_load_pdi); 1363 1364/** 1365 * zynqmp_pm_aes_engine - Access AES hardware to encrypt/decrypt the data using 1366 * AES-GCM core. 1367 * @address: Address of the AesParams structure. 1368 * @out: Returned output value 1369 * 1370 * Return: Returns status, either success or error code. 1371 */ 1372int zynqmp_pm_aes_engine(const u64 address, u32 *out) 1373{ 1374 u32 ret_payload[PAYLOAD_ARG_CNT]; 1375 int ret; 1376 1377 if (!out) 1378 return -EINVAL; 1379 1380 ret = zynqmp_pm_invoke_fn(PM_SECURE_AES, ret_payload, 2, upper_32_bits(address), 1381 lower_32_bits(address)); 1382 *out = ret_payload[1]; 1383 1384 return ret; 1385} 1386EXPORT_SYMBOL_GPL(zynqmp_pm_aes_engine); 1387 1388/** 1389 * zynqmp_pm_efuse_access - Provides access to efuse memory. 1390 * @address: Address of the efuse params structure 1391 * @out: Returned output value 1392 * 1393 * Return: Returns status, either success or error code. 1394 */ 1395int zynqmp_pm_efuse_access(const u64 address, u32 *out) 1396{ 1397 u32 ret_payload[PAYLOAD_ARG_CNT]; 1398 int ret; 1399 1400 if (!out) 1401 return -EINVAL; 1402 1403 ret = zynqmp_pm_invoke_fn(PM_EFUSE_ACCESS, ret_payload, 2, 1404 upper_32_bits(address), 1405 lower_32_bits(address)); 1406 *out = ret_payload[1]; 1407 1408 return ret; 1409} 1410EXPORT_SYMBOL_GPL(zynqmp_pm_efuse_access); 1411 1412/** 1413 * zynqmp_pm_sha_hash - Access the SHA engine to calculate the hash 1414 * @address: Address of the data/ Address of output buffer where 1415 * hash should be stored. 1416 * @size: Size of the data. 1417 * @flags: 1418 * BIT(0) - for initializing csudma driver and SHA3(Here address 1419 * and size inputs can be NULL). 1420 * BIT(1) - to call Sha3_Update API which can be called multiple 1421 * times when data is not contiguous. 1422 * BIT(2) - to get final hash of the whole updated data. 1423 * Hash will be overwritten at provided address with 1424 * 48 bytes. 1425 * 1426 * Return: Returns status, either success or error code. 1427 */ 1428int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags) 1429{ 1430 u32 lower_addr = lower_32_bits(address); 1431 u32 upper_addr = upper_32_bits(address); 1432 1433 return zynqmp_pm_invoke_fn(PM_SECURE_SHA, NULL, 4, upper_addr, lower_addr, size, flags); 1434} 1435EXPORT_SYMBOL_GPL(zynqmp_pm_sha_hash); 1436 1437/** 1438 * zynqmp_pm_register_notifier() - PM API for register a subsystem 1439 * to be notified about specific 1440 * event/error. 1441 * @node: Node ID to which the event is related. 1442 * @event: Event Mask of Error events for which wants to get notified. 1443 * @wake: Wake subsystem upon capturing the event if value 1 1444 * @enable: Enable the registration for value 1, disable for value 0 1445 * 1446 * This function is used to register/un-register for particular node-event 1447 * combination in firmware. 1448 * 1449 * Return: Returns status, either success or error+reason 1450 */ 1451 1452int zynqmp_pm_register_notifier(const u32 node, const u32 event, 1453 const u32 wake, const u32 enable) 1454{ 1455 return zynqmp_pm_invoke_fn(PM_REGISTER_NOTIFIER, NULL, 4, node, event, wake, enable); 1456} 1457EXPORT_SYMBOL_GPL(zynqmp_pm_register_notifier); 1458 1459/** 1460 * zynqmp_pm_system_shutdown - PM call to request a system shutdown or restart 1461 * @type: Shutdown or restart? 0 for shutdown, 1 for restart 1462 * @subtype: Specifies which system should be restarted or shut down 1463 * 1464 * Return: Returns status, either success or error+reason 1465 */ 1466int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype) 1467{ 1468 return zynqmp_pm_invoke_fn(PM_SYSTEM_SHUTDOWN, NULL, 2, type, subtype); 1469} 1470 1471/** 1472 * zynqmp_pm_set_feature_config - PM call to request IOCTL for feature config 1473 * @id: The config ID of the feature to be configured 1474 * @value: The config value of the feature to be configured 1475 * 1476 * Return: Returns 0 on success or error value on failure. 1477 */ 1478int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value) 1479{ 1480 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, 0, IOCTL_SET_FEATURE_CONFIG, id, value); 1481} 1482 1483/** 1484 * zynqmp_pm_get_feature_config - PM call to get value of configured feature 1485 * @id: The config id of the feature to be queried 1486 * @payload: Returned value array 1487 * 1488 * Return: Returns 0 on success or error value on failure. 1489 */ 1490int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, 1491 u32 *payload) 1492{ 1493 return zynqmp_pm_invoke_fn(PM_IOCTL, payload, 3, 0, IOCTL_GET_FEATURE_CONFIG, id); 1494} 1495 1496/** 1497 * zynqmp_pm_set_sd_config - PM call to set value of SD config registers 1498 * @node: SD node ID 1499 * @config: The config type of SD registers 1500 * @value: Value to be set 1501 * 1502 * Return: Returns 0 on success or error value on failure. 1503 */ 1504int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value) 1505{ 1506 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, node, IOCTL_SET_SD_CONFIG, config, value); 1507} 1508EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_config); 1509 1510/** 1511 * zynqmp_pm_set_gem_config - PM call to set value of GEM config registers 1512 * @node: GEM node ID 1513 * @config: The config type of GEM registers 1514 * @value: Value to be set 1515 * 1516 * Return: Returns 0 on success or error value on failure. 1517 */ 1518int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config, 1519 u32 value) 1520{ 1521 return zynqmp_pm_invoke_fn(PM_IOCTL, NULL, 4, node, IOCTL_SET_GEM_CONFIG, config, value); 1522} 1523EXPORT_SYMBOL_GPL(zynqmp_pm_set_gem_config); 1524 1525/** 1526 * struct zynqmp_pm_shutdown_scope - Struct for shutdown scope 1527 * @subtype: Shutdown subtype 1528 * @name: Matching string for scope argument 1529 * 1530 * This struct encapsulates mapping between shutdown scope ID and string. 1531 */ 1532struct zynqmp_pm_shutdown_scope { 1533 const enum zynqmp_pm_shutdown_subtype subtype; 1534 const char *name; 1535}; 1536 1537static struct zynqmp_pm_shutdown_scope shutdown_scopes[] = { 1538 [ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM] = { 1539 .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM, 1540 .name = "subsystem", 1541 }, 1542 [ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY] = { 1543 .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY, 1544 .name = "ps_only", 1545 }, 1546 [ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM] = { 1547 .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM, 1548 .name = "system", 1549 }, 1550}; 1551 1552static struct zynqmp_pm_shutdown_scope *selected_scope = 1553 &shutdown_scopes[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM]; 1554 1555/** 1556 * zynqmp_pm_is_shutdown_scope_valid - Check if shutdown scope string is valid 1557 * @scope_string: Shutdown scope string 1558 * 1559 * Return: Return pointer to matching shutdown scope struct from 1560 * array of available options in system if string is valid, 1561 * otherwise returns NULL. 1562 */ 1563static struct zynqmp_pm_shutdown_scope* 1564 zynqmp_pm_is_shutdown_scope_valid(const char *scope_string) 1565{ 1566 int count; 1567 1568 for (count = 0; count < ARRAY_SIZE(shutdown_scopes); count++) 1569 if (sysfs_streq(scope_string, shutdown_scopes[count].name)) 1570 return &shutdown_scopes[count]; 1571 1572 return NULL; 1573} 1574 1575static ssize_t shutdown_scope_show(struct device *device, 1576 struct device_attribute *attr, 1577 char *buf) 1578{ 1579 int i; 1580 1581 for (i = 0; i < ARRAY_SIZE(shutdown_scopes); i++) { 1582 if (&shutdown_scopes[i] == selected_scope) { 1583 strcat(buf, "["); 1584 strcat(buf, shutdown_scopes[i].name); 1585 strcat(buf, "]"); 1586 } else { 1587 strcat(buf, shutdown_scopes[i].name); 1588 } 1589 strcat(buf, " "); 1590 } 1591 strcat(buf, "\n"); 1592 1593 return strlen(buf); 1594} 1595 1596static ssize_t shutdown_scope_store(struct device *device, 1597 struct device_attribute *attr, 1598 const char *buf, size_t count) 1599{ 1600 int ret; 1601 struct zynqmp_pm_shutdown_scope *scope; 1602 1603 scope = zynqmp_pm_is_shutdown_scope_valid(buf); 1604 if (!scope) 1605 return -EINVAL; 1606 1607 ret = zynqmp_pm_system_shutdown(ZYNQMP_PM_SHUTDOWN_TYPE_SETSCOPE_ONLY, 1608 scope->subtype); 1609 if (ret) { 1610 pr_err("unable to set shutdown scope %s\n", buf); 1611 return ret; 1612 } 1613 1614 selected_scope = scope; 1615 1616 return count; 1617} 1618 1619static DEVICE_ATTR_RW(shutdown_scope); 1620 1621static ssize_t health_status_store(struct device *device, 1622 struct device_attribute *attr, 1623 const char *buf, size_t count) 1624{ 1625 int ret; 1626 unsigned int value; 1627 1628 ret = kstrtouint(buf, 10, &value); 1629 if (ret) 1630 return ret; 1631 1632 ret = zynqmp_pm_set_boot_health_status(value); 1633 if (ret) { 1634 dev_err(device, "unable to set healthy bit value to %u\n", 1635 value); 1636 return ret; 1637 } 1638 1639 return count; 1640} 1641 1642static DEVICE_ATTR_WO(health_status); 1643 1644static ssize_t ggs_show(struct device *device, 1645 struct device_attribute *attr, 1646 char *buf, 1647 u32 reg) 1648{ 1649 int ret; 1650 u32 ret_payload[PAYLOAD_ARG_CNT]; 1651 1652 ret = zynqmp_pm_read_ggs(reg, ret_payload); 1653 if (ret) 1654 return ret; 1655 1656 return sprintf(buf, "0x%x\n", ret_payload[1]); 1657} 1658 1659static ssize_t ggs_store(struct device *device, 1660 struct device_attribute *attr, 1661 const char *buf, size_t count, 1662 u32 reg) 1663{ 1664 long value; 1665 int ret; 1666 1667 if (reg >= GSS_NUM_REGS) 1668 return -EINVAL; 1669 1670 ret = kstrtol(buf, 16, &value); 1671 if (ret) { 1672 count = -EFAULT; 1673 goto err; 1674 } 1675 1676 ret = zynqmp_pm_write_ggs(reg, value); 1677 if (ret) 1678 count = -EFAULT; 1679err: 1680 return count; 1681} 1682 1683/* GGS register show functions */ 1684#define GGS0_SHOW(N) \ 1685 ssize_t ggs##N##_show(struct device *device, \ 1686 struct device_attribute *attr, \ 1687 char *buf) \ 1688 { \ 1689 return ggs_show(device, attr, buf, N); \ 1690 } 1691 1692static GGS0_SHOW(0); 1693static GGS0_SHOW(1); 1694static GGS0_SHOW(2); 1695static GGS0_SHOW(3); 1696 1697/* GGS register store function */ 1698#define GGS0_STORE(N) \ 1699 ssize_t ggs##N##_store(struct device *device, \ 1700 struct device_attribute *attr, \ 1701 const char *buf, \ 1702 size_t count) \ 1703 { \ 1704 return ggs_store(device, attr, buf, count, N); \ 1705 } 1706 1707static GGS0_STORE(0); 1708static GGS0_STORE(1); 1709static GGS0_STORE(2); 1710static GGS0_STORE(3); 1711 1712static ssize_t pggs_show(struct device *device, 1713 struct device_attribute *attr, 1714 char *buf, 1715 u32 reg) 1716{ 1717 int ret; 1718 u32 ret_payload[PAYLOAD_ARG_CNT]; 1719 1720 ret = zynqmp_pm_read_pggs(reg, ret_payload); 1721 if (ret) 1722 return ret; 1723 1724 return sprintf(buf, "0x%x\n", ret_payload[1]); 1725} 1726 1727static ssize_t pggs_store(struct device *device, 1728 struct device_attribute *attr, 1729 const char *buf, size_t count, 1730 u32 reg) 1731{ 1732 long value; 1733 int ret; 1734 1735 if (reg >= GSS_NUM_REGS) 1736 return -EINVAL; 1737 1738 ret = kstrtol(buf, 16, &value); 1739 if (ret) { 1740 count = -EFAULT; 1741 goto err; 1742 } 1743 1744 ret = zynqmp_pm_write_pggs(reg, value); 1745 if (ret) 1746 count = -EFAULT; 1747 1748err: 1749 return count; 1750} 1751 1752#define PGGS0_SHOW(N) \ 1753 ssize_t pggs##N##_show(struct device *device, \ 1754 struct device_attribute *attr, \ 1755 char *buf) \ 1756 { \ 1757 return pggs_show(device, attr, buf, N); \ 1758 } 1759 1760#define PGGS0_STORE(N) \ 1761 ssize_t pggs##N##_store(struct device *device, \ 1762 struct device_attribute *attr, \ 1763 const char *buf, \ 1764 size_t count) \ 1765 { \ 1766 return pggs_store(device, attr, buf, count, N); \ 1767 } 1768 1769/* PGGS register show functions */ 1770static PGGS0_SHOW(0); 1771static PGGS0_SHOW(1); 1772static PGGS0_SHOW(2); 1773static PGGS0_SHOW(3); 1774 1775/* PGGS register store functions */ 1776static PGGS0_STORE(0); 1777static PGGS0_STORE(1); 1778static PGGS0_STORE(2); 1779static PGGS0_STORE(3); 1780 1781/* GGS register attributes */ 1782static DEVICE_ATTR_RW(ggs0); 1783static DEVICE_ATTR_RW(ggs1); 1784static DEVICE_ATTR_RW(ggs2); 1785static DEVICE_ATTR_RW(ggs3); 1786 1787/* PGGS register attributes */ 1788static DEVICE_ATTR_RW(pggs0); 1789static DEVICE_ATTR_RW(pggs1); 1790static DEVICE_ATTR_RW(pggs2); 1791static DEVICE_ATTR_RW(pggs3); 1792 1793static ssize_t feature_config_id_show(struct device *device, 1794 struct device_attribute *attr, 1795 char *buf) 1796{ 1797 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1798 1799 return sysfs_emit(buf, "%d\n", devinfo->feature_conf_id); 1800} 1801 1802static ssize_t feature_config_id_store(struct device *device, 1803 struct device_attribute *attr, 1804 const char *buf, size_t count) 1805{ 1806 u32 config_id; 1807 int ret; 1808 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1809 1810 if (!buf) 1811 return -EINVAL; 1812 1813 ret = kstrtou32(buf, 10, &config_id); 1814 if (ret) 1815 return ret; 1816 1817 devinfo->feature_conf_id = config_id; 1818 1819 return count; 1820} 1821 1822static DEVICE_ATTR_RW(feature_config_id); 1823 1824static ssize_t feature_config_value_show(struct device *device, 1825 struct device_attribute *attr, 1826 char *buf) 1827{ 1828 int ret; 1829 u32 ret_payload[PAYLOAD_ARG_CNT]; 1830 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1831 1832 ret = zynqmp_pm_get_feature_config(devinfo->feature_conf_id, 1833 ret_payload); 1834 if (ret) 1835 return ret; 1836 1837 return sysfs_emit(buf, "%d\n", ret_payload[1]); 1838} 1839 1840static ssize_t feature_config_value_store(struct device *device, 1841 struct device_attribute *attr, 1842 const char *buf, size_t count) 1843{ 1844 u32 value; 1845 int ret; 1846 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1847 1848 if (!buf) 1849 return -EINVAL; 1850 1851 ret = kstrtou32(buf, 10, &value); 1852 if (ret) 1853 return ret; 1854 1855 ret = zynqmp_pm_set_feature_config(devinfo->feature_conf_id, 1856 value); 1857 if (ret) 1858 return ret; 1859 1860 return count; 1861} 1862 1863static DEVICE_ATTR_RW(feature_config_value); 1864 1865static struct attribute *zynqmp_firmware_attrs[] = { 1866 &dev_attr_ggs0.attr, 1867 &dev_attr_ggs1.attr, 1868 &dev_attr_ggs2.attr, 1869 &dev_attr_ggs3.attr, 1870 &dev_attr_pggs0.attr, 1871 &dev_attr_pggs1.attr, 1872 &dev_attr_pggs2.attr, 1873 &dev_attr_pggs3.attr, 1874 &dev_attr_shutdown_scope.attr, 1875 &dev_attr_health_status.attr, 1876 &dev_attr_feature_config_id.attr, 1877 &dev_attr_feature_config_value.attr, 1878 NULL, 1879}; 1880 1881ATTRIBUTE_GROUPS(zynqmp_firmware); 1882 1883static int zynqmp_firmware_probe(struct platform_device *pdev) 1884{ 1885 struct device *dev = &pdev->dev; 1886 struct zynqmp_devinfo *devinfo; 1887 int ret; 1888 1889 ret = get_set_conduit_method(dev->of_node); 1890 if (ret) 1891 return ret; 1892 1893 ret = do_feature_check_call(PM_FEATURE_CHECK); 1894 if (ret >= 0 && ((ret & FIRMWARE_VERSION_MASK) >= PM_API_VERSION_1)) 1895 feature_check_enabled = true; 1896 1897 devinfo = devm_kzalloc(dev, sizeof(*devinfo), GFP_KERNEL); 1898 if (!devinfo) 1899 return -ENOMEM; 1900 1901 devinfo->dev = dev; 1902 1903 platform_set_drvdata(pdev, devinfo); 1904 1905 /* Check PM API version number */ 1906 ret = zynqmp_pm_get_api_version(&pm_api_version); 1907 if (ret) 1908 return ret; 1909 1910 if (pm_api_version < ZYNQMP_PM_VERSION) { 1911 panic("%s Platform Management API version error. Expected: v%d.%d - Found: v%d.%d\n", 1912 __func__, 1913 ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR, 1914 pm_api_version >> 16, pm_api_version & 0xFFFF); 1915 } 1916 1917 pr_info("%s Platform Management API v%d.%d\n", __func__, 1918 pm_api_version >> 16, pm_api_version & 0xFFFF); 1919 1920 /* Get the Family code and sub family code of platform */ 1921 ret = zynqmp_pm_get_family_info(&pm_family_code, &pm_sub_family_code); 1922 if (ret < 0) 1923 return ret; 1924 1925 /* Check trustzone version number */ 1926 ret = zynqmp_pm_get_trustzone_version(&pm_tz_version); 1927 if (ret) 1928 panic("Legacy trustzone found without version support\n"); 1929 1930 if (pm_tz_version < ZYNQMP_TZ_VERSION) 1931 panic("%s Trustzone version error. Expected: v%d.%d - Found: v%d.%d\n", 1932 __func__, 1933 ZYNQMP_TZ_VERSION_MAJOR, ZYNQMP_TZ_VERSION_MINOR, 1934 pm_tz_version >> 16, pm_tz_version & 0xFFFF); 1935 1936 pr_info("%s Trustzone version v%d.%d\n", __func__, 1937 pm_tz_version >> 16, pm_tz_version & 0xFFFF); 1938 1939 ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs, 1940 ARRAY_SIZE(firmware_devs), NULL, 0, NULL); 1941 if (ret) { 1942 dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret); 1943 return ret; 1944 } 1945 1946 zynqmp_pm_api_debugfs_init(); 1947 1948 if (pm_family_code == VERSAL_FAMILY_CODE) { 1949 em_dev = platform_device_register_data(&pdev->dev, "xlnx_event_manager", 1950 -1, NULL, 0); 1951 if (IS_ERR(em_dev)) 1952 dev_err_probe(&pdev->dev, PTR_ERR(em_dev), "EM register fail with error\n"); 1953 } 1954 1955 return of_platform_populate(dev->of_node, NULL, NULL, dev); 1956} 1957 1958static void zynqmp_firmware_remove(struct platform_device *pdev) 1959{ 1960 struct pm_api_feature_data *feature_data; 1961 struct hlist_node *tmp; 1962 int i; 1963 1964 mfd_remove_devices(&pdev->dev); 1965 zynqmp_pm_api_debugfs_exit(); 1966 1967 hash_for_each_safe(pm_api_features_map, i, tmp, feature_data, hentry) { 1968 hash_del(&feature_data->hentry); 1969 kfree(feature_data); 1970 } 1971 1972 platform_device_unregister(em_dev); 1973} 1974 1975static const struct of_device_id zynqmp_firmware_of_match[] = { 1976 {.compatible = "xlnx,zynqmp-firmware"}, 1977 {.compatible = "xlnx,versal-firmware"}, 1978 {}, 1979}; 1980MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match); 1981 1982static struct platform_driver zynqmp_firmware_driver = { 1983 .driver = { 1984 .name = "zynqmp_firmware", 1985 .of_match_table = zynqmp_firmware_of_match, 1986 .dev_groups = zynqmp_firmware_groups, 1987 }, 1988 .probe = zynqmp_firmware_probe, 1989 .remove_new = zynqmp_firmware_remove, 1990}; 1991module_platform_driver(zynqmp_firmware_driver); 1992