1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * TI clock support
4 *
5 * Copyright (C) 2013 Texas Instruments, Inc.
6 *
7 * Tero Kristo <t-kristo@ti.com>
8 */
9
10#include <linux/cleanup.h>
11#include <linux/clk.h>
12#include <linux/clk-provider.h>
13#include <linux/clkdev.h>
14#include <linux/clk/ti.h>
15#include <linux/io.h>
16#include <linux/of.h>
17#include <linux/of_address.h>
18#include <linux/list.h>
19#include <linux/minmax.h>
20#include <linux/regmap.h>
21#include <linux/string_helpers.h>
22#include <linux/memblock.h>
23#include <linux/device.h>
24
25#include "clock.h"
26
27#undef pr_fmt
28#define pr_fmt(fmt) "%s: " fmt, __func__
29
30static LIST_HEAD(clk_hw_omap_clocks);
31struct ti_clk_ll_ops *ti_clk_ll_ops;
32static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
33
34struct ti_clk_features ti_clk_features;
35
36struct clk_iomap {
37	struct regmap *regmap;
38	void __iomem *mem;
39};
40
41static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
42
43static void clk_memmap_writel(u32 val, const struct clk_omap_reg *reg)
44{
45	struct clk_iomap *io = clk_memmaps[reg->index];
46
47	if (reg->ptr)
48		writel_relaxed(val, reg->ptr);
49	else if (io->regmap)
50		regmap_write(io->regmap, reg->offset, val);
51	else
52		writel_relaxed(val, io->mem + reg->offset);
53}
54
55static void _clk_rmw(u32 val, u32 mask, void __iomem *ptr)
56{
57	u32 v;
58
59	v = readl_relaxed(ptr);
60	v &= ~mask;
61	v |= val;
62	writel_relaxed(v, ptr);
63}
64
65static void clk_memmap_rmw(u32 val, u32 mask, const struct clk_omap_reg *reg)
66{
67	struct clk_iomap *io = clk_memmaps[reg->index];
68
69	if (reg->ptr) {
70		_clk_rmw(val, mask, reg->ptr);
71	} else if (io->regmap) {
72		regmap_update_bits(io->regmap, reg->offset, mask, val);
73	} else {
74		_clk_rmw(val, mask, io->mem + reg->offset);
75	}
76}
77
78static u32 clk_memmap_readl(const struct clk_omap_reg *reg)
79{
80	u32 val;
81	struct clk_iomap *io = clk_memmaps[reg->index];
82
83	if (reg->ptr)
84		val = readl_relaxed(reg->ptr);
85	else if (io->regmap)
86		regmap_read(io->regmap, reg->offset, &val);
87	else
88		val = readl_relaxed(io->mem + reg->offset);
89
90	return val;
91}
92
93/**
94 * ti_clk_setup_ll_ops - setup low level clock operations
95 * @ops: low level clock ops descriptor
96 *
97 * Sets up low level clock operations for TI clock driver. This is used
98 * to provide various callbacks for the clock driver towards platform
99 * specific code. Returns 0 on success, -EBUSY if ll_ops have been
100 * registered already.
101 */
102int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
103{
104	if (ti_clk_ll_ops) {
105		pr_err("Attempt to register ll_ops multiple times.\n");
106		return -EBUSY;
107	}
108
109	ti_clk_ll_ops = ops;
110	ops->clk_readl = clk_memmap_readl;
111	ops->clk_writel = clk_memmap_writel;
112	ops->clk_rmw = clk_memmap_rmw;
113
114	return 0;
115}
116
117/*
118 * Eventually we could standardize to using '_' for clk-*.c files to follow the
119 * TRM naming.
120 */
121static struct device_node *ti_find_clock_provider(struct device_node *from,
122						  const char *name)
123{
124	char *tmp __free(kfree) = NULL;
125	struct device_node *np;
126	bool found = false;
127	const char *n;
128	char *p;
129
130	tmp = kstrdup_and_replace(name, '-', '_', GFP_KERNEL);
131	if (!tmp)
132		return NULL;
133
134	/* Ignore a possible address for the node name */
135	p = strchr(tmp, '@');
136	if (p)
137		*p = '\0';
138
139	/* Node named "clock" with "clock-output-names" */
140	for_each_of_allnodes_from(from, np) {
141		if (of_property_read_string_index(np, "clock-output-names",
142						  0, &n))
143			continue;
144
145		if (!strncmp(n, tmp, strlen(tmp))) {
146			of_node_get(np);
147			found = true;
148			break;
149		}
150	}
151
152	if (found) {
153		of_node_put(from);
154		return np;
155	}
156
157	/* Fall back to using old node name base provider name */
158	return of_find_node_by_name(from, tmp);
159}
160
161/**
162 * ti_dt_clocks_register - register DT alias clocks during boot
163 * @oclks: list of clocks to register
164 *
165 * Register alias or non-standard DT clock entries during boot. By
166 * default, DT clocks are found based on their clock-output-names
167 * property, or the clock node name for legacy cases. If any
168 * additional con-id / dev-id -> clock mapping is required, use this
169 * function to list these.
170 */
171void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
172{
173	struct ti_dt_clk *c;
174	struct device_node *node, *parent, *child;
175	struct clk *clk;
176	struct of_phandle_args clkspec;
177	char buf[64];
178	char *ptr;
179	char *tags[2];
180	int i;
181	int num_args;
182	int ret;
183	static bool clkctrl_nodes_missing;
184	static bool has_clkctrl_data;
185	static bool compat_mode;
186
187	compat_mode = ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT;
188
189	for (c = oclks; c->node_name != NULL; c++) {
190		strcpy(buf, c->node_name);
191		ptr = buf;
192		for (i = 0; i < 2; i++)
193			tags[i] = NULL;
194		num_args = 0;
195		while (*ptr) {
196			if (*ptr == ':') {
197				if (num_args >= 2) {
198					pr_warn("Bad number of tags on %s\n",
199						c->node_name);
200					return;
201				}
202				tags[num_args++] = ptr + 1;
203				*ptr = 0;
204			}
205			ptr++;
206		}
207
208		if (num_args && clkctrl_nodes_missing)
209			continue;
210
211		node = ti_find_clock_provider(NULL, buf);
212		if (num_args && compat_mode) {
213			parent = node;
214			child = of_get_child_by_name(parent, "clock");
215			if (!child)
216				child = of_get_child_by_name(parent, "clk");
217			if (child) {
218				of_node_put(parent);
219				node = child;
220			}
221		}
222
223		clkspec.np = node;
224		clkspec.args_count = num_args;
225		for (i = 0; i < num_args; i++) {
226			ret = kstrtoint(tags[i], i ? 10 : 16, clkspec.args + i);
227			if (ret) {
228				pr_warn("Bad tag in %s at %d: %s\n",
229					c->node_name, i, tags[i]);
230				of_node_put(node);
231				return;
232			}
233		}
234		clk = of_clk_get_from_provider(&clkspec);
235		of_node_put(node);
236		if (!IS_ERR(clk)) {
237			c->lk.clk = clk;
238			clkdev_add(&c->lk);
239		} else {
240			if (num_args && !has_clkctrl_data) {
241				struct device_node *np;
242
243				np = of_find_compatible_node(NULL, NULL,
244							     "ti,clkctrl");
245				if (np) {
246					has_clkctrl_data = true;
247					of_node_put(np);
248				} else {
249					clkctrl_nodes_missing = true;
250
251					pr_warn("missing clkctrl nodes, please update your dts.\n");
252					continue;
253				}
254			}
255
256			pr_warn("failed to lookup clock node %s, ret=%ld\n",
257				c->node_name, PTR_ERR(clk));
258		}
259	}
260}
261
262struct clk_init_item {
263	struct device_node *node;
264	void *user;
265	ti_of_clk_init_cb_t func;
266	struct list_head link;
267};
268
269static LIST_HEAD(retry_list);
270
271/**
272 * ti_clk_retry_init - retries a failed clock init at later phase
273 * @node: device node for the clock
274 * @user: user data pointer
275 * @func: init function to be called for the clock
276 *
277 * Adds a failed clock init to the retry list. The retry list is parsed
278 * once all the other clocks have been initialized.
279 */
280int __init ti_clk_retry_init(struct device_node *node, void *user,
281			     ti_of_clk_init_cb_t func)
282{
283	struct clk_init_item *retry;
284
285	pr_debug("%pOFn: adding to retry list...\n", node);
286	retry = kzalloc(sizeof(*retry), GFP_KERNEL);
287	if (!retry)
288		return -ENOMEM;
289
290	retry->node = node;
291	retry->func = func;
292	retry->user = user;
293	list_add(&retry->link, &retry_list);
294
295	return 0;
296}
297
298/**
299 * ti_clk_get_reg_addr - get register address for a clock register
300 * @node: device node for the clock
301 * @index: register index from the clock node
302 * @reg: pointer to target register struct
303 *
304 * Builds clock register address from device tree information, and returns
305 * the data via the provided output pointer @reg. Returns 0 on success,
306 * negative error value on failure.
307 */
308int ti_clk_get_reg_addr(struct device_node *node, int index,
309			struct clk_omap_reg *reg)
310{
311	u32 clksel_addr, val;
312	bool is_clksel = false;
313	int i, err;
314
315	for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
316		if (clocks_node_ptr[i] == node->parent)
317			break;
318		if (clocks_node_ptr[i] == node->parent->parent)
319			break;
320	}
321
322	if (i == CLK_MAX_MEMMAPS) {
323		pr_err("clk-provider not found for %pOFn!\n", node);
324		return -ENOENT;
325	}
326
327	reg->index = i;
328
329	if (of_device_is_compatible(node->parent, "ti,clksel")) {
330		err = of_property_read_u32_index(node->parent, "reg", index, &clksel_addr);
331		if (err) {
332			pr_err("%pOFn parent clksel must have reg[%d]!\n", node, index);
333			return -EINVAL;
334		}
335		is_clksel = true;
336	}
337
338	err = of_property_read_u32_index(node, "reg", index, &val);
339	if (err && is_clksel) {
340		/* Legacy clksel with no reg and a possible ti,bit-shift property */
341		reg->offset = clksel_addr;
342		reg->bit = ti_clk_get_legacy_bit_shift(node);
343		reg->ptr = NULL;
344
345		return 0;
346	}
347
348	/* Updated clksel clock with a proper reg property */
349	if (is_clksel) {
350		reg->offset = clksel_addr;
351		reg->bit = val;
352		reg->ptr = NULL;
353		return 0;
354	}
355
356	/* Other clocks that may or may not have ti,bit-shift property  */
357	reg->offset = val;
358	reg->bit = ti_clk_get_legacy_bit_shift(node);
359	reg->ptr = NULL;
360
361	return 0;
362}
363
364/**
365 * ti_clk_get_legacy_bit_shift - get bit shift for a clock register
366 * @node: device node for the clock
367 *
368 * Gets the clock register bit shift using the legacy ti,bit-shift
369 * property. Only needed for legacy clock, and can be eventually
370 * dropped once all the composite clocks use a clksel node with a
371 * proper reg property.
372 */
373int ti_clk_get_legacy_bit_shift(struct device_node *node)
374{
375	int err;
376	u32 val;
377
378	err = of_property_read_u32(node, "ti,bit-shift", &val);
379	if (!err && in_range(val, 0, 32))
380		return val;
381
382	return 0;
383}
384
385void ti_clk_latch(struct clk_omap_reg *reg, s8 shift)
386{
387	u32 latch;
388
389	if (shift < 0)
390		return;
391
392	latch = 1 << shift;
393
394	ti_clk_ll_ops->clk_rmw(latch, latch, reg);
395	ti_clk_ll_ops->clk_rmw(0, latch, reg);
396	ti_clk_ll_ops->clk_readl(reg); /* OCP barrier */
397}
398
399/**
400 * omap2_clk_provider_init - init master clock provider
401 * @parent: master node
402 * @index: internal index for clk_reg_ops
403 * @syscon: syscon regmap pointer for accessing clock registers
404 * @mem: iomem pointer for the clock provider memory area, only used if
405 *       syscon is not provided
406 *
407 * Initializes a master clock IP block. This basically sets up the
408 * mapping from clocks node to the memory map index. All the clocks
409 * are then initialized through the common of_clk_init call, and the
410 * clocks will access their memory maps based on the node layout.
411 * Returns 0 in success.
412 */
413int __init omap2_clk_provider_init(struct device_node *parent, int index,
414				   struct regmap *syscon, void __iomem *mem)
415{
416	struct device_node *clocks;
417	struct clk_iomap *io;
418
419	/* get clocks for this parent */
420	clocks = of_get_child_by_name(parent, "clocks");
421	if (!clocks) {
422		pr_err("%pOFn missing 'clocks' child node.\n", parent);
423		return -EINVAL;
424	}
425
426	/* add clocks node info */
427	clocks_node_ptr[index] = clocks;
428
429	io = kzalloc(sizeof(*io), GFP_KERNEL);
430	if (!io)
431		return -ENOMEM;
432
433	io->regmap = syscon;
434	io->mem = mem;
435
436	clk_memmaps[index] = io;
437
438	return 0;
439}
440
441/**
442 * omap2_clk_legacy_provider_init - initialize a legacy clock provider
443 * @index: index for the clock provider
444 * @mem: iomem pointer for the clock provider memory area
445 *
446 * Initializes a legacy clock provider memory mapping.
447 */
448void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
449{
450	struct clk_iomap *io;
451
452	io = memblock_alloc(sizeof(*io), SMP_CACHE_BYTES);
453	if (!io)
454		panic("%s: Failed to allocate %zu bytes\n", __func__,
455		      sizeof(*io));
456
457	io->mem = mem;
458
459	clk_memmaps[index] = io;
460}
461
462/**
463 * ti_dt_clk_init_retry_clks - init clocks from the retry list
464 *
465 * Initializes any clocks that have failed to initialize before,
466 * reasons being missing parent node(s) during earlier init. This
467 * typically happens only for DPLLs which need to have both of their
468 * parent clocks ready during init.
469 */
470void ti_dt_clk_init_retry_clks(void)
471{
472	struct clk_init_item *retry;
473	struct clk_init_item *tmp;
474	int retries = 5;
475
476	while (!list_empty(&retry_list) && retries) {
477		list_for_each_entry_safe(retry, tmp, &retry_list, link) {
478			pr_debug("retry-init: %pOFn\n", retry->node);
479			retry->func(retry->user, retry->node);
480			list_del(&retry->link);
481			kfree(retry);
482		}
483		retries--;
484	}
485}
486
487static const struct of_device_id simple_clk_match_table[] __initconst = {
488	{ .compatible = "fixed-clock" },
489	{ .compatible = "fixed-factor-clock" },
490	{ }
491};
492
493/**
494 * ti_dt_clk_name - init clock name from first output name or node name
495 * @np: device node
496 *
497 * Use the first clock-output-name for the clock name if found. Fall back
498 * to legacy naming based on node name.
499 */
500const char *ti_dt_clk_name(struct device_node *np)
501{
502	const char *name;
503
504	if (!of_property_read_string_index(np, "clock-output-names", 0,
505					   &name))
506		return name;
507
508	return np->name;
509}
510
511/**
512 * ti_clk_add_aliases - setup clock aliases
513 *
514 * Sets up any missing clock aliases. No return value.
515 */
516void __init ti_clk_add_aliases(void)
517{
518	struct device_node *np;
519	struct clk *clk;
520
521	for_each_matching_node(np, simple_clk_match_table) {
522		struct of_phandle_args clkspec;
523
524		clkspec.np = np;
525		clk = of_clk_get_from_provider(&clkspec);
526
527		ti_clk_add_alias(clk, ti_dt_clk_name(np));
528	}
529}
530
531/**
532 * ti_clk_setup_features - setup clock features flags
533 * @features: features definition to use
534 *
535 * Initializes the clock driver features flags based on platform
536 * provided data. No return value.
537 */
538void __init ti_clk_setup_features(struct ti_clk_features *features)
539{
540	memcpy(&ti_clk_features, features, sizeof(*features));
541}
542
543/**
544 * ti_clk_get_features - get clock driver features flags
545 *
546 * Get TI clock driver features description. Returns a pointer
547 * to the current feature setup.
548 */
549const struct ti_clk_features *ti_clk_get_features(void)
550{
551	return &ti_clk_features;
552}
553
554/**
555 * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
556 * @clk_names: ptr to an array of strings of clock names to enable
557 * @num_clocks: number of clock names in @clk_names
558 *
559 * Prepare and enable a list of clocks, named by @clk_names.  No
560 * return value. XXX Deprecated; only needed until these clocks are
561 * properly claimed and enabled by the drivers or core code that uses
562 * them.  XXX What code disables & calls clk_put on these clocks?
563 */
564void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
565{
566	struct clk *init_clk;
567	int i;
568
569	for (i = 0; i < num_clocks; i++) {
570		init_clk = clk_get(NULL, clk_names[i]);
571		if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
572			 clk_names[i]))
573			continue;
574		clk_prepare_enable(init_clk);
575	}
576}
577
578/**
579 * ti_clk_add_alias - add a clock alias for a TI clock
580 * @clk: clock handle to create alias for
581 * @con: connection ID for this clock
582 *
583 * Creates a clock alias for a TI clock. Allocates the clock lookup entry
584 * and assigns the data to it. Returns 0 if successful, negative error
585 * value otherwise.
586 */
587int ti_clk_add_alias(struct clk *clk, const char *con)
588{
589	struct clk_lookup *cl;
590
591	if (!clk)
592		return 0;
593
594	if (IS_ERR(clk))
595		return PTR_ERR(clk);
596
597	cl = kzalloc(sizeof(*cl), GFP_KERNEL);
598	if (!cl)
599		return -ENOMEM;
600
601	cl->con_id = con;
602	cl->clk = clk;
603
604	clkdev_add(cl);
605
606	return 0;
607}
608
609/**
610 * of_ti_clk_register - register a TI clock to the common clock framework
611 * @node: device node for this clock
612 * @hw: hardware clock handle
613 * @con: connection ID for this clock
614 *
615 * Registers a TI clock to the common clock framework, and adds a clock
616 * alias for it. Returns a handle to the registered clock if successful,
617 * ERR_PTR value in failure.
618 */
619struct clk *of_ti_clk_register(struct device_node *node, struct clk_hw *hw,
620			       const char *con)
621{
622	struct clk *clk;
623	int ret;
624
625	ret = of_clk_hw_register(node, hw);
626	if (ret)
627		return ERR_PTR(ret);
628
629	clk = hw->clk;
630	ret = ti_clk_add_alias(clk, con);
631	if (ret) {
632		clk_unregister(clk);
633		return ERR_PTR(ret);
634	}
635
636	return clk;
637}
638
639/**
640 * of_ti_clk_register_omap_hw - register a clk_hw_omap to the clock framework
641 * @node: device node for this clock
642 * @hw: hardware clock handle
643 * @con: connection ID for this clock
644 *
645 * Registers a clk_hw_omap clock to the clock framewor, adds a clock alias
646 * for it, and adds the list to the available clk_hw_omap type clocks.
647 * Returns a handle to the registered clock if successful, ERR_PTR value
648 * in failure.
649 */
650struct clk *of_ti_clk_register_omap_hw(struct device_node *node,
651				       struct clk_hw *hw, const char *con)
652{
653	struct clk *clk;
654	struct clk_hw_omap *oclk;
655
656	clk = of_ti_clk_register(node, hw, con);
657	if (IS_ERR(clk))
658		return clk;
659
660	oclk = to_clk_hw_omap(hw);
661
662	list_add(&oclk->node, &clk_hw_omap_clocks);
663
664	return clk;
665}
666
667/**
668 * omap2_clk_for_each - call function for each registered clk_hw_omap
669 * @fn: pointer to a callback function
670 *
671 * Call @fn for each registered clk_hw_omap, passing @hw to each
672 * function.  @fn must return 0 for success or any other value for
673 * failure.  If @fn returns non-zero, the iteration across clocks
674 * will stop and the non-zero return value will be passed to the
675 * caller of omap2_clk_for_each().
676 */
677int omap2_clk_for_each(int (*fn)(struct clk_hw_omap *hw))
678{
679	int ret;
680	struct clk_hw_omap *hw;
681
682	list_for_each_entry(hw, &clk_hw_omap_clocks, node) {
683		ret = (*fn)(hw);
684		if (ret)
685			break;
686	}
687
688	return ret;
689}
690
691/**
692 * omap2_clk_is_hw_omap - check if the provided clk_hw is OMAP clock
693 * @hw: clk_hw to check if it is an omap clock or not
694 *
695 * Checks if the provided clk_hw is OMAP clock or not. Returns true if
696 * it is, false otherwise.
697 */
698bool omap2_clk_is_hw_omap(struct clk_hw *hw)
699{
700	struct clk_hw_omap *oclk;
701
702	list_for_each_entry(oclk, &clk_hw_omap_clocks, node) {
703		if (&oclk->hw == hw)
704			return true;
705	}
706
707	return false;
708}
709