mly.c revision 163896
1/*- 2 * Copyright (c) 2000, 2001 Michael Smith 3 * Copyright (c) 2000 BSDi 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD: head/sys/dev/mly/mly.c 163896 2006-11-02 00:54:38Z mjacob $ 28 */ 29 30#include <sys/param.h> 31#include <sys/systm.h> 32#include <sys/malloc.h> 33#include <sys/kernel.h> 34#include <sys/bus.h> 35#include <sys/conf.h> 36#include <sys/ctype.h> 37#include <sys/ioccom.h> 38#include <sys/stat.h> 39 40#include <machine/bus.h> 41#include <machine/resource.h> 42#include <sys/rman.h> 43 44#include <cam/cam.h> 45#include <cam/cam_ccb.h> 46#include <cam/cam_periph.h> 47#include <cam/cam_sim.h> 48#include <cam/cam_xpt_sim.h> 49#include <cam/scsi/scsi_all.h> 50#include <cam/scsi/scsi_message.h> 51 52#include <dev/pci/pcireg.h> 53#include <dev/pci/pcivar.h> 54 55#include <dev/mly/mlyreg.h> 56#include <dev/mly/mlyio.h> 57#include <dev/mly/mlyvar.h> 58#include <dev/mly/mly_tables.h> 59 60static int mly_probe(device_t dev); 61static int mly_attach(device_t dev); 62static int mly_pci_attach(struct mly_softc *sc); 63static int mly_detach(device_t dev); 64static int mly_shutdown(device_t dev); 65static void mly_intr(void *arg); 66 67static int mly_sg_map(struct mly_softc *sc); 68static void mly_sg_map_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error); 69static int mly_mmbox_map(struct mly_softc *sc); 70static void mly_mmbox_map_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error); 71static void mly_free(struct mly_softc *sc); 72 73static int mly_get_controllerinfo(struct mly_softc *sc); 74static void mly_scan_devices(struct mly_softc *sc); 75static void mly_rescan_btl(struct mly_softc *sc, int bus, int target); 76static void mly_complete_rescan(struct mly_command *mc); 77static int mly_get_eventstatus(struct mly_softc *sc); 78static int mly_enable_mmbox(struct mly_softc *sc); 79static int mly_flush(struct mly_softc *sc); 80static int mly_ioctl(struct mly_softc *sc, struct mly_command_ioctl *ioctl, void **data, 81 size_t datasize, u_int8_t *status, void *sense_buffer, size_t *sense_length); 82static void mly_check_event(struct mly_softc *sc); 83static void mly_fetch_event(struct mly_softc *sc); 84static void mly_complete_event(struct mly_command *mc); 85static void mly_process_event(struct mly_softc *sc, struct mly_event *me); 86static void mly_periodic(void *data); 87 88static int mly_immediate_command(struct mly_command *mc); 89static int mly_start(struct mly_command *mc); 90static void mly_done(struct mly_softc *sc); 91static void mly_complete(void *context, int pending); 92 93static int mly_alloc_command(struct mly_softc *sc, struct mly_command **mcp); 94static void mly_release_command(struct mly_command *mc); 95static void mly_alloc_commands_map(void *arg, bus_dma_segment_t *segs, int nseg, int error); 96static int mly_alloc_commands(struct mly_softc *sc); 97static void mly_release_commands(struct mly_softc *sc); 98static void mly_map_command(struct mly_command *mc); 99static void mly_unmap_command(struct mly_command *mc); 100 101static int mly_cam_attach(struct mly_softc *sc); 102static void mly_cam_detach(struct mly_softc *sc); 103static void mly_cam_rescan_btl(struct mly_softc *sc, int bus, int target); 104static void mly_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb); 105static void mly_cam_action(struct cam_sim *sim, union ccb *ccb); 106static int mly_cam_action_io(struct cam_sim *sim, struct ccb_scsiio *csio); 107static void mly_cam_poll(struct cam_sim *sim); 108static void mly_cam_complete(struct mly_command *mc); 109static struct cam_periph *mly_find_periph(struct mly_softc *sc, int bus, int target); 110static int mly_name_device(struct mly_softc *sc, int bus, int target); 111 112static int mly_fwhandshake(struct mly_softc *sc); 113 114static void mly_describe_controller(struct mly_softc *sc); 115#ifdef MLY_DEBUG 116static void mly_printstate(struct mly_softc *sc); 117static void mly_print_command(struct mly_command *mc); 118static void mly_print_packet(struct mly_command *mc); 119static void mly_panic(struct mly_softc *sc, char *reason); 120#endif 121void mly_print_controller(int controller); 122static int mly_timeout(struct mly_softc *sc); 123 124 125static d_open_t mly_user_open; 126static d_close_t mly_user_close; 127static d_ioctl_t mly_user_ioctl; 128static int mly_user_command(struct mly_softc *sc, struct mly_user_command *uc); 129static int mly_user_health(struct mly_softc *sc, struct mly_user_health *uh); 130 131#define MLY_CMD_TIMEOUT 20 132 133static device_method_t mly_methods[] = { 134 /* Device interface */ 135 DEVMETHOD(device_probe, mly_probe), 136 DEVMETHOD(device_attach, mly_attach), 137 DEVMETHOD(device_detach, mly_detach), 138 DEVMETHOD(device_shutdown, mly_shutdown), 139 { 0, 0 } 140}; 141 142static driver_t mly_pci_driver = { 143 "mly", 144 mly_methods, 145 sizeof(struct mly_softc) 146}; 147 148static devclass_t mly_devclass; 149DRIVER_MODULE(mly, pci, mly_pci_driver, mly_devclass, 0, 0); 150 151static struct cdevsw mly_cdevsw = { 152 .d_version = D_VERSION, 153 .d_flags = D_NEEDGIANT, 154 .d_open = mly_user_open, 155 .d_close = mly_user_close, 156 .d_ioctl = mly_user_ioctl, 157 .d_name = "mly", 158}; 159 160/******************************************************************************** 161 ******************************************************************************** 162 Device Interface 163 ******************************************************************************** 164 ********************************************************************************/ 165 166static struct mly_ident 167{ 168 u_int16_t vendor; 169 u_int16_t device; 170 u_int16_t subvendor; 171 u_int16_t subdevice; 172 int hwif; 173 char *desc; 174} mly_identifiers[] = { 175 {0x1069, 0xba56, 0x1069, 0x0040, MLY_HWIF_STRONGARM, "Mylex eXtremeRAID 2000"}, 176 {0x1069, 0xba56, 0x1069, 0x0030, MLY_HWIF_STRONGARM, "Mylex eXtremeRAID 3000"}, 177 {0x1069, 0x0050, 0x1069, 0x0050, MLY_HWIF_I960RX, "Mylex AcceleRAID 352"}, 178 {0x1069, 0x0050, 0x1069, 0x0052, MLY_HWIF_I960RX, "Mylex AcceleRAID 170"}, 179 {0x1069, 0x0050, 0x1069, 0x0054, MLY_HWIF_I960RX, "Mylex AcceleRAID 160"}, 180 {0, 0, 0, 0, 0, 0} 181}; 182 183/******************************************************************************** 184 * Compare the provided PCI device with the list we support. 185 */ 186static int 187mly_probe(device_t dev) 188{ 189 struct mly_ident *m; 190 191 debug_called(1); 192 193 for (m = mly_identifiers; m->vendor != 0; m++) { 194 if ((m->vendor == pci_get_vendor(dev)) && 195 (m->device == pci_get_device(dev)) && 196 ((m->subvendor == 0) || ((m->subvendor == pci_get_subvendor(dev)) && 197 (m->subdevice == pci_get_subdevice(dev))))) { 198 199 device_set_desc(dev, m->desc); 200 return(BUS_PROBE_DEFAULT); /* allow room to be overridden */ 201 } 202 } 203 return(ENXIO); 204} 205 206/******************************************************************************** 207 * Initialise the controller and softc 208 */ 209static int 210mly_attach(device_t dev) 211{ 212 struct mly_softc *sc = device_get_softc(dev); 213 int error; 214 215 debug_called(1); 216 217 sc->mly_dev = dev; 218 219#ifdef MLY_DEBUG 220 if (device_get_unit(sc->mly_dev) == 0) 221 mly_softc0 = sc; 222#endif 223 224 /* 225 * Do PCI-specific initialisation. 226 */ 227 if ((error = mly_pci_attach(sc)) != 0) 228 goto out; 229 230 /* 231 * Initialise per-controller queues. 232 */ 233 mly_initq_free(sc); 234 mly_initq_busy(sc); 235 mly_initq_complete(sc); 236 237 /* 238 * Initialise command-completion task. 239 */ 240 TASK_INIT(&sc->mly_task_complete, 0, mly_complete, sc); 241 242 /* disable interrupts before we start talking to the controller */ 243 MLY_MASK_INTERRUPTS(sc); 244 245 /* 246 * Wait for the controller to come ready, handshake with the firmware if required. 247 * This is typically only necessary on platforms where the controller BIOS does not 248 * run. 249 */ 250 if ((error = mly_fwhandshake(sc))) 251 goto out; 252 253 /* 254 * Allocate initial command buffers. 255 */ 256 if ((error = mly_alloc_commands(sc))) 257 goto out; 258 259 /* 260 * Obtain controller feature information 261 */ 262 if ((error = mly_get_controllerinfo(sc))) 263 goto out; 264 265 /* 266 * Reallocate command buffers now we know how many we want. 267 */ 268 mly_release_commands(sc); 269 if ((error = mly_alloc_commands(sc))) 270 goto out; 271 272 /* 273 * Get the current event counter for health purposes, populate the initial 274 * health status buffer. 275 */ 276 if ((error = mly_get_eventstatus(sc))) 277 goto out; 278 279 /* 280 * Enable memory-mailbox mode. 281 */ 282 if ((error = mly_enable_mmbox(sc))) 283 goto out; 284 285 /* 286 * Attach to CAM. 287 */ 288 if ((error = mly_cam_attach(sc))) 289 goto out; 290 291 /* 292 * Print a little information about the controller 293 */ 294 mly_describe_controller(sc); 295 296 /* 297 * Mark all attached devices for rescan. 298 */ 299 mly_scan_devices(sc); 300 301 /* 302 * Instigate the first status poll immediately. Rescan completions won't 303 * happen until interrupts are enabled, which should still be before 304 * the SCSI subsystem gets to us, courtesy of the "SCSI settling delay". 305 */ 306 mly_periodic((void *)sc); 307 308 /* 309 * Create the control device. 310 */ 311 sc->mly_dev_t = make_dev(&mly_cdevsw, device_get_unit(sc->mly_dev), UID_ROOT, GID_OPERATOR, 312 S_IRUSR | S_IWUSR, "mly%d", device_get_unit(sc->mly_dev)); 313 sc->mly_dev_t->si_drv1 = sc; 314 315 /* enable interrupts now */ 316 MLY_UNMASK_INTERRUPTS(sc); 317 318#ifdef MLY_DEBUG 319 timeout((timeout_t *)mly_timeout, sc, MLY_CMD_TIMEOUT * hz); 320#endif 321 322 out: 323 if (error != 0) 324 mly_free(sc); 325 return(error); 326} 327 328/******************************************************************************** 329 * Perform PCI-specific initialisation. 330 */ 331static int 332mly_pci_attach(struct mly_softc *sc) 333{ 334 int i, error; 335 u_int32_t command; 336 337 debug_called(1); 338 339 /* assume failure is 'not configured' */ 340 error = ENXIO; 341 342 /* 343 * Verify that the adapter is correctly set up in PCI space. 344 * 345 * XXX we shouldn't do this; the PCI code should. 346 */ 347 command = pci_read_config(sc->mly_dev, PCIR_COMMAND, 2); 348 command |= PCIM_CMD_BUSMASTEREN; 349 pci_write_config(sc->mly_dev, PCIR_COMMAND, command, 2); 350 command = pci_read_config(sc->mly_dev, PCIR_COMMAND, 2); 351 if (!(command & PCIM_CMD_BUSMASTEREN)) { 352 mly_printf(sc, "can't enable busmaster feature\n"); 353 goto fail; 354 } 355 if ((command & PCIM_CMD_MEMEN) == 0) { 356 mly_printf(sc, "memory window not available\n"); 357 goto fail; 358 } 359 360 /* 361 * Allocate the PCI register window. 362 */ 363 sc->mly_regs_rid = PCIR_BAR(0); /* first base address register */ 364 if ((sc->mly_regs_resource = bus_alloc_resource_any(sc->mly_dev, 365 SYS_RES_MEMORY, &sc->mly_regs_rid, RF_ACTIVE)) == NULL) { 366 mly_printf(sc, "can't allocate register window\n"); 367 goto fail; 368 } 369 sc->mly_btag = rman_get_bustag(sc->mly_regs_resource); 370 sc->mly_bhandle = rman_get_bushandle(sc->mly_regs_resource); 371 372 /* 373 * Allocate and connect our interrupt. 374 */ 375 sc->mly_irq_rid = 0; 376 if ((sc->mly_irq = bus_alloc_resource_any(sc->mly_dev, SYS_RES_IRQ, 377 &sc->mly_irq_rid, RF_SHAREABLE | RF_ACTIVE)) == NULL) { 378 mly_printf(sc, "can't allocate interrupt\n"); 379 goto fail; 380 } 381 if (bus_setup_intr(sc->mly_dev, sc->mly_irq, INTR_TYPE_CAM | INTR_ENTROPY, mly_intr, sc, &sc->mly_intr)) { 382 mly_printf(sc, "can't set up interrupt\n"); 383 goto fail; 384 } 385 386 /* assume failure is 'out of memory' */ 387 error = ENOMEM; 388 389 /* 390 * Allocate the parent bus DMA tag appropriate for our PCI interface. 391 * 392 * Note that all of these controllers are 64-bit capable. 393 */ 394 if (bus_dma_tag_create(NULL, /* parent */ 395 1, 0, /* alignment, boundary */ 396 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 397 BUS_SPACE_MAXADDR, /* highaddr */ 398 NULL, NULL, /* filter, filterarg */ 399 MAXBSIZE, MLY_MAX_SGENTRIES, /* maxsize, nsegments */ 400 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 401 BUS_DMA_ALLOCNOW, /* flags */ 402 NULL, /* lockfunc */ 403 NULL, /* lockarg */ 404 &sc->mly_parent_dmat)) { 405 mly_printf(sc, "can't allocate parent DMA tag\n"); 406 goto fail; 407 } 408 409 /* 410 * Create DMA tag for mapping buffers into controller-addressable space. 411 */ 412 if (bus_dma_tag_create(sc->mly_parent_dmat, /* parent */ 413 1, 0, /* alignment, boundary */ 414 BUS_SPACE_MAXADDR, /* lowaddr */ 415 BUS_SPACE_MAXADDR, /* highaddr */ 416 NULL, NULL, /* filter, filterarg */ 417 MAXBSIZE, MLY_MAX_SGENTRIES, /* maxsize, nsegments */ 418 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 419 0, /* flags */ 420 busdma_lock_mutex, /* lockfunc */ 421 &Giant, /* lockarg */ 422 &sc->mly_buffer_dmat)) { 423 mly_printf(sc, "can't allocate buffer DMA tag\n"); 424 goto fail; 425 } 426 427 /* 428 * Initialise the DMA tag for command packets. 429 */ 430 if (bus_dma_tag_create(sc->mly_parent_dmat, /* parent */ 431 1, 0, /* alignment, boundary */ 432 BUS_SPACE_MAXADDR, /* lowaddr */ 433 BUS_SPACE_MAXADDR, /* highaddr */ 434 NULL, NULL, /* filter, filterarg */ 435 sizeof(union mly_command_packet) * MLY_MAX_COMMANDS, 1, /* maxsize, nsegments */ 436 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 437 BUS_DMA_ALLOCNOW, /* flags */ 438 NULL, NULL, /* lockfunc, lockarg */ 439 &sc->mly_packet_dmat)) { 440 mly_printf(sc, "can't allocate command packet DMA tag\n"); 441 goto fail; 442 } 443 444 /* 445 * Detect the hardware interface version 446 */ 447 for (i = 0; mly_identifiers[i].vendor != 0; i++) { 448 if ((mly_identifiers[i].vendor == pci_get_vendor(sc->mly_dev)) && 449 (mly_identifiers[i].device == pci_get_device(sc->mly_dev))) { 450 sc->mly_hwif = mly_identifiers[i].hwif; 451 switch(sc->mly_hwif) { 452 case MLY_HWIF_I960RX: 453 debug(1, "set hardware up for i960RX"); 454 sc->mly_doorbell_true = 0x00; 455 sc->mly_command_mailbox = MLY_I960RX_COMMAND_MAILBOX; 456 sc->mly_status_mailbox = MLY_I960RX_STATUS_MAILBOX; 457 sc->mly_idbr = MLY_I960RX_IDBR; 458 sc->mly_odbr = MLY_I960RX_ODBR; 459 sc->mly_error_status = MLY_I960RX_ERROR_STATUS; 460 sc->mly_interrupt_status = MLY_I960RX_INTERRUPT_STATUS; 461 sc->mly_interrupt_mask = MLY_I960RX_INTERRUPT_MASK; 462 break; 463 case MLY_HWIF_STRONGARM: 464 debug(1, "set hardware up for StrongARM"); 465 sc->mly_doorbell_true = 0xff; /* doorbell 'true' is 0 */ 466 sc->mly_command_mailbox = MLY_STRONGARM_COMMAND_MAILBOX; 467 sc->mly_status_mailbox = MLY_STRONGARM_STATUS_MAILBOX; 468 sc->mly_idbr = MLY_STRONGARM_IDBR; 469 sc->mly_odbr = MLY_STRONGARM_ODBR; 470 sc->mly_error_status = MLY_STRONGARM_ERROR_STATUS; 471 sc->mly_interrupt_status = MLY_STRONGARM_INTERRUPT_STATUS; 472 sc->mly_interrupt_mask = MLY_STRONGARM_INTERRUPT_MASK; 473 break; 474 } 475 break; 476 } 477 } 478 479 /* 480 * Create the scatter/gather mappings. 481 */ 482 if ((error = mly_sg_map(sc))) 483 goto fail; 484 485 /* 486 * Allocate and map the memory mailbox 487 */ 488 if ((error = mly_mmbox_map(sc))) 489 goto fail; 490 491 error = 0; 492 493fail: 494 return(error); 495} 496 497/******************************************************************************** 498 * Shut the controller down and detach all our resources. 499 */ 500static int 501mly_detach(device_t dev) 502{ 503 int error; 504 505 if ((error = mly_shutdown(dev)) != 0) 506 return(error); 507 508 mly_free(device_get_softc(dev)); 509 return(0); 510} 511 512/******************************************************************************** 513 * Bring the controller to a state where it can be safely left alone. 514 * 515 * Note that it should not be necessary to wait for any outstanding commands, 516 * as they should be completed prior to calling here. 517 * 518 * XXX this applies for I/O, but not status polls; we should beware of 519 * the case where a status command is running while we detach. 520 */ 521static int 522mly_shutdown(device_t dev) 523{ 524 struct mly_softc *sc = device_get_softc(dev); 525 526 debug_called(1); 527 528 if (sc->mly_state & MLY_STATE_OPEN) 529 return(EBUSY); 530 531 /* kill the periodic event */ 532 untimeout(mly_periodic, sc, sc->mly_periodic); 533 534 /* flush controller */ 535 mly_printf(sc, "flushing cache..."); 536 printf("%s\n", mly_flush(sc) ? "failed" : "done"); 537 538 MLY_MASK_INTERRUPTS(sc); 539 540 return(0); 541} 542 543/******************************************************************************* 544 * Take an interrupt, or be poked by other code to look for interrupt-worthy 545 * status. 546 */ 547static void 548mly_intr(void *arg) 549{ 550 struct mly_softc *sc = (struct mly_softc *)arg; 551 552 debug_called(2); 553 554 mly_done(sc); 555}; 556 557/******************************************************************************** 558 ******************************************************************************** 559 Bus-dependant Resource Management 560 ******************************************************************************** 561 ********************************************************************************/ 562 563/******************************************************************************** 564 * Allocate memory for the scatter/gather tables 565 */ 566static int 567mly_sg_map(struct mly_softc *sc) 568{ 569 size_t segsize; 570 571 debug_called(1); 572 573 /* 574 * Create a single tag describing a region large enough to hold all of 575 * the s/g lists we will need. 576 */ 577 segsize = sizeof(struct mly_sg_entry) * MLY_MAX_COMMANDS *MLY_MAX_SGENTRIES; 578 if (bus_dma_tag_create(sc->mly_parent_dmat, /* parent */ 579 1, 0, /* alignment,boundary */ 580 BUS_SPACE_MAXADDR, /* lowaddr */ 581 BUS_SPACE_MAXADDR, /* highaddr */ 582 NULL, NULL, /* filter, filterarg */ 583 segsize, 1, /* maxsize, nsegments */ 584 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 585 BUS_DMA_ALLOCNOW, /* flags */ 586 NULL, NULL, /* lockfunc, lockarg */ 587 &sc->mly_sg_dmat)) { 588 mly_printf(sc, "can't allocate scatter/gather DMA tag\n"); 589 return(ENOMEM); 590 } 591 592 /* 593 * Allocate enough s/g maps for all commands and permanently map them into 594 * controller-visible space. 595 * 596 * XXX this assumes we can get enough space for all the s/g maps in one 597 * contiguous slab. 598 */ 599 if (bus_dmamem_alloc(sc->mly_sg_dmat, (void **)&sc->mly_sg_table, 600 BUS_DMA_NOWAIT, &sc->mly_sg_dmamap)) { 601 mly_printf(sc, "can't allocate s/g table\n"); 602 return(ENOMEM); 603 } 604 if (bus_dmamap_load(sc->mly_sg_dmat, sc->mly_sg_dmamap, sc->mly_sg_table, 605 segsize, mly_sg_map_helper, sc, BUS_DMA_NOWAIT) != 0) 606 return (ENOMEM); 607 return(0); 608} 609 610/******************************************************************************** 611 * Save the physical address of the base of the s/g table. 612 */ 613static void 614mly_sg_map_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error) 615{ 616 struct mly_softc *sc = (struct mly_softc *)arg; 617 618 debug_called(1); 619 620 /* save base of s/g table's address in bus space */ 621 sc->mly_sg_busaddr = segs->ds_addr; 622} 623 624/******************************************************************************** 625 * Allocate memory for the memory-mailbox interface 626 */ 627static int 628mly_mmbox_map(struct mly_softc *sc) 629{ 630 631 /* 632 * Create a DMA tag for a single contiguous region large enough for the 633 * memory mailbox structure. 634 */ 635 if (bus_dma_tag_create(sc->mly_parent_dmat, /* parent */ 636 1, 0, /* alignment,boundary */ 637 BUS_SPACE_MAXADDR, /* lowaddr */ 638 BUS_SPACE_MAXADDR, /* highaddr */ 639 NULL, NULL, /* filter, filterarg */ 640 sizeof(struct mly_mmbox), 1, /* maxsize, nsegments */ 641 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 642 BUS_DMA_ALLOCNOW, /* flags */ 643 NULL, NULL, /* lockfunc, lockarg */ 644 &sc->mly_mmbox_dmat)) { 645 mly_printf(sc, "can't allocate memory mailbox DMA tag\n"); 646 return(ENOMEM); 647 } 648 649 /* 650 * Allocate the buffer 651 */ 652 if (bus_dmamem_alloc(sc->mly_mmbox_dmat, (void **)&sc->mly_mmbox, BUS_DMA_NOWAIT, &sc->mly_mmbox_dmamap)) { 653 mly_printf(sc, "can't allocate memory mailbox\n"); 654 return(ENOMEM); 655 } 656 if (bus_dmamap_load(sc->mly_mmbox_dmat, sc->mly_mmbox_dmamap, sc->mly_mmbox, 657 sizeof(struct mly_mmbox), mly_mmbox_map_helper, sc, 658 BUS_DMA_NOWAIT) != 0) 659 return (ENOMEM); 660 bzero(sc->mly_mmbox, sizeof(*sc->mly_mmbox)); 661 return(0); 662 663} 664 665/******************************************************************************** 666 * Save the physical address of the memory mailbox 667 */ 668static void 669mly_mmbox_map_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error) 670{ 671 struct mly_softc *sc = (struct mly_softc *)arg; 672 673 debug_called(1); 674 675 sc->mly_mmbox_busaddr = segs->ds_addr; 676} 677 678/******************************************************************************** 679 * Free all of the resources associated with (sc) 680 * 681 * Should not be called if the controller is active. 682 */ 683static void 684mly_free(struct mly_softc *sc) 685{ 686 687 debug_called(1); 688 689 /* Remove the management device */ 690 destroy_dev(sc->mly_dev_t); 691 692 /* detach from CAM */ 693 mly_cam_detach(sc); 694 695 /* release command memory */ 696 mly_release_commands(sc); 697 698 /* throw away the controllerinfo structure */ 699 if (sc->mly_controllerinfo != NULL) 700 free(sc->mly_controllerinfo, M_DEVBUF); 701 702 /* throw away the controllerparam structure */ 703 if (sc->mly_controllerparam != NULL) 704 free(sc->mly_controllerparam, M_DEVBUF); 705 706 /* destroy data-transfer DMA tag */ 707 if (sc->mly_buffer_dmat) 708 bus_dma_tag_destroy(sc->mly_buffer_dmat); 709 710 /* free and destroy DMA memory and tag for s/g lists */ 711 if (sc->mly_sg_table) { 712 bus_dmamap_unload(sc->mly_sg_dmat, sc->mly_sg_dmamap); 713 bus_dmamem_free(sc->mly_sg_dmat, sc->mly_sg_table, sc->mly_sg_dmamap); 714 } 715 if (sc->mly_sg_dmat) 716 bus_dma_tag_destroy(sc->mly_sg_dmat); 717 718 /* free and destroy DMA memory and tag for memory mailbox */ 719 if (sc->mly_mmbox) { 720 bus_dmamap_unload(sc->mly_mmbox_dmat, sc->mly_mmbox_dmamap); 721 bus_dmamem_free(sc->mly_mmbox_dmat, sc->mly_mmbox, sc->mly_mmbox_dmamap); 722 } 723 if (sc->mly_mmbox_dmat) 724 bus_dma_tag_destroy(sc->mly_mmbox_dmat); 725 726 /* disconnect the interrupt handler */ 727 if (sc->mly_intr) 728 bus_teardown_intr(sc->mly_dev, sc->mly_irq, sc->mly_intr); 729 if (sc->mly_irq != NULL) 730 bus_release_resource(sc->mly_dev, SYS_RES_IRQ, sc->mly_irq_rid, sc->mly_irq); 731 732 /* destroy the parent DMA tag */ 733 if (sc->mly_parent_dmat) 734 bus_dma_tag_destroy(sc->mly_parent_dmat); 735 736 /* release the register window mapping */ 737 if (sc->mly_regs_resource != NULL) 738 bus_release_resource(sc->mly_dev, SYS_RES_MEMORY, sc->mly_regs_rid, sc->mly_regs_resource); 739} 740 741/******************************************************************************** 742 ******************************************************************************** 743 Command Wrappers 744 ******************************************************************************** 745 ********************************************************************************/ 746 747/******************************************************************************** 748 * Fill in the mly_controllerinfo and mly_controllerparam fields in the softc. 749 */ 750static int 751mly_get_controllerinfo(struct mly_softc *sc) 752{ 753 struct mly_command_ioctl mci; 754 u_int8_t status; 755 int error; 756 757 debug_called(1); 758 759 if (sc->mly_controllerinfo != NULL) 760 free(sc->mly_controllerinfo, M_DEVBUF); 761 762 /* build the getcontrollerinfo ioctl and send it */ 763 bzero(&mci, sizeof(mci)); 764 sc->mly_controllerinfo = NULL; 765 mci.sub_ioctl = MDACIOCTL_GETCONTROLLERINFO; 766 if ((error = mly_ioctl(sc, &mci, (void **)&sc->mly_controllerinfo, sizeof(*sc->mly_controllerinfo), 767 &status, NULL, NULL))) 768 return(error); 769 if (status != 0) 770 return(EIO); 771 772 if (sc->mly_controllerparam != NULL) 773 free(sc->mly_controllerparam, M_DEVBUF); 774 775 /* build the getcontrollerparameter ioctl and send it */ 776 bzero(&mci, sizeof(mci)); 777 sc->mly_controllerparam = NULL; 778 mci.sub_ioctl = MDACIOCTL_GETCONTROLLERPARAMETER; 779 if ((error = mly_ioctl(sc, &mci, (void **)&sc->mly_controllerparam, sizeof(*sc->mly_controllerparam), 780 &status, NULL, NULL))) 781 return(error); 782 if (status != 0) 783 return(EIO); 784 785 return(0); 786} 787 788/******************************************************************************** 789 * Schedule all possible devices for a rescan. 790 * 791 */ 792static void 793mly_scan_devices(struct mly_softc *sc) 794{ 795 int bus, target; 796 797 debug_called(1); 798 799 /* 800 * Clear any previous BTL information. 801 */ 802 bzero(&sc->mly_btl, sizeof(sc->mly_btl)); 803 804 /* 805 * Mark all devices as requiring a rescan, and let the next 806 * periodic scan collect them. 807 */ 808 for (bus = 0; bus < sc->mly_cam_channels; bus++) 809 if (MLY_BUS_IS_VALID(sc, bus)) 810 for (target = 0; target < MLY_MAX_TARGETS; target++) 811 sc->mly_btl[bus][target].mb_flags = MLY_BTL_RESCAN; 812 813} 814 815/******************************************************************************** 816 * Rescan a device, possibly as a consequence of getting an event which suggests 817 * that it may have changed. 818 * 819 * If we suffer resource starvation, we can abandon the rescan as we'll be 820 * retried. 821 */ 822static void 823mly_rescan_btl(struct mly_softc *sc, int bus, int target) 824{ 825 struct mly_command *mc; 826 struct mly_command_ioctl *mci; 827 828 debug_called(1); 829 830 /* check that this bus is valid */ 831 if (!MLY_BUS_IS_VALID(sc, bus)) 832 return; 833 834 /* get a command */ 835 if (mly_alloc_command(sc, &mc)) 836 return; 837 838 /* set up the data buffer */ 839 if ((mc->mc_data = malloc(sizeof(union mly_devinfo), M_DEVBUF, M_NOWAIT | M_ZERO)) == NULL) { 840 mly_release_command(mc); 841 return; 842 } 843 mc->mc_flags |= MLY_CMD_DATAIN; 844 mc->mc_complete = mly_complete_rescan; 845 846 /* 847 * Build the ioctl. 848 */ 849 mci = (struct mly_command_ioctl *)&mc->mc_packet->ioctl; 850 mci->opcode = MDACMD_IOCTL; 851 mci->addr.phys.controller = 0; 852 mci->timeout.value = 30; 853 mci->timeout.scale = MLY_TIMEOUT_SECONDS; 854 if (MLY_BUS_IS_VIRTUAL(sc, bus)) { 855 mc->mc_length = mci->data_size = sizeof(struct mly_ioctl_getlogdevinfovalid); 856 mci->sub_ioctl = MDACIOCTL_GETLOGDEVINFOVALID; 857 mci->addr.log.logdev = MLY_LOGDEV_ID(sc, bus, target); 858 debug(1, "logical device %d", mci->addr.log.logdev); 859 } else { 860 mc->mc_length = mci->data_size = sizeof(struct mly_ioctl_getphysdevinfovalid); 861 mci->sub_ioctl = MDACIOCTL_GETPHYSDEVINFOVALID; 862 mci->addr.phys.lun = 0; 863 mci->addr.phys.target = target; 864 mci->addr.phys.channel = bus; 865 debug(1, "physical device %d:%d", mci->addr.phys.channel, mci->addr.phys.target); 866 } 867 868 /* 869 * Dispatch the command. If we successfully send the command, clear the rescan 870 * bit. 871 */ 872 if (mly_start(mc) != 0) { 873 mly_release_command(mc); 874 } else { 875 sc->mly_btl[bus][target].mb_flags &= ~MLY_BTL_RESCAN; /* success */ 876 } 877} 878 879/******************************************************************************** 880 * Handle the completion of a rescan operation 881 */ 882static void 883mly_complete_rescan(struct mly_command *mc) 884{ 885 struct mly_softc *sc = mc->mc_sc; 886 struct mly_ioctl_getlogdevinfovalid *ldi; 887 struct mly_ioctl_getphysdevinfovalid *pdi; 888 struct mly_command_ioctl *mci; 889 struct mly_btl btl, *btlp; 890 int bus, target, rescan; 891 892 debug_called(1); 893 894 /* 895 * Recover the bus and target from the command. We need these even in 896 * the case where we don't have a useful response. 897 */ 898 mci = (struct mly_command_ioctl *)&mc->mc_packet->ioctl; 899 if (mci->sub_ioctl == MDACIOCTL_GETLOGDEVINFOVALID) { 900 bus = MLY_LOGDEV_BUS(sc, mci->addr.log.logdev); 901 target = MLY_LOGDEV_TARGET(sc, mci->addr.log.logdev); 902 } else { 903 bus = mci->addr.phys.channel; 904 target = mci->addr.phys.target; 905 } 906 /* XXX validate bus/target? */ 907 908 /* the default result is 'no device' */ 909 bzero(&btl, sizeof(btl)); 910 911 /* if the rescan completed OK, we have possibly-new BTL data */ 912 if (mc->mc_status == 0) { 913 if (mc->mc_length == sizeof(*ldi)) { 914 ldi = (struct mly_ioctl_getlogdevinfovalid *)mc->mc_data; 915 if ((MLY_LOGDEV_BUS(sc, ldi->logical_device_number) != bus) || 916 (MLY_LOGDEV_TARGET(sc, ldi->logical_device_number) != target)) { 917 mly_printf(sc, "WARNING: BTL rescan for %d:%d returned data for %d:%d instead\n", 918 bus, target, MLY_LOGDEV_BUS(sc, ldi->logical_device_number), 919 MLY_LOGDEV_TARGET(sc, ldi->logical_device_number)); 920 /* XXX what can we do about this? */ 921 } 922 btl.mb_flags = MLY_BTL_LOGICAL; 923 btl.mb_type = ldi->raid_level; 924 btl.mb_state = ldi->state; 925 debug(1, "BTL rescan for %d returns %s, %s", ldi->logical_device_number, 926 mly_describe_code(mly_table_device_type, ldi->raid_level), 927 mly_describe_code(mly_table_device_state, ldi->state)); 928 } else if (mc->mc_length == sizeof(*pdi)) { 929 pdi = (struct mly_ioctl_getphysdevinfovalid *)mc->mc_data; 930 if ((pdi->channel != bus) || (pdi->target != target)) { 931 mly_printf(sc, "WARNING: BTL rescan for %d:%d returned data for %d:%d instead\n", 932 bus, target, pdi->channel, pdi->target); 933 /* XXX what can we do about this? */ 934 } 935 btl.mb_flags = MLY_BTL_PHYSICAL; 936 btl.mb_type = MLY_DEVICE_TYPE_PHYSICAL; 937 btl.mb_state = pdi->state; 938 btl.mb_speed = pdi->speed; 939 btl.mb_width = pdi->width; 940 if (pdi->state != MLY_DEVICE_STATE_UNCONFIGURED) 941 sc->mly_btl[bus][target].mb_flags |= MLY_BTL_PROTECTED; 942 debug(1, "BTL rescan for %d:%d returns %s", bus, target, 943 mly_describe_code(mly_table_device_state, pdi->state)); 944 } else { 945 mly_printf(sc, "BTL rescan result invalid\n"); 946 } 947 } 948 949 free(mc->mc_data, M_DEVBUF); 950 mly_release_command(mc); 951 952 /* 953 * Decide whether we need to rescan the device. 954 */ 955 rescan = 0; 956 957 /* device type changes (usually between 'nothing' and 'something') */ 958 btlp = &sc->mly_btl[bus][target]; 959 if (btl.mb_flags != btlp->mb_flags) { 960 debug(1, "flags changed, rescanning"); 961 rescan = 1; 962 } 963 964 /* XXX other reasons? */ 965 966 /* 967 * Update BTL information. 968 */ 969 *btlp = btl; 970 971 /* 972 * Perform CAM rescan if required. 973 */ 974 if (rescan) 975 mly_cam_rescan_btl(sc, bus, target); 976} 977 978/******************************************************************************** 979 * Get the current health status and set the 'next event' counter to suit. 980 */ 981static int 982mly_get_eventstatus(struct mly_softc *sc) 983{ 984 struct mly_command_ioctl mci; 985 struct mly_health_status *mh; 986 u_int8_t status; 987 int error; 988 989 /* build the gethealthstatus ioctl and send it */ 990 bzero(&mci, sizeof(mci)); 991 mh = NULL; 992 mci.sub_ioctl = MDACIOCTL_GETHEALTHSTATUS; 993 994 if ((error = mly_ioctl(sc, &mci, (void **)&mh, sizeof(*mh), &status, NULL, NULL))) 995 return(error); 996 if (status != 0) 997 return(EIO); 998 999 /* get the event counter */ 1000 sc->mly_event_change = mh->change_counter; 1001 sc->mly_event_waiting = mh->next_event; 1002 sc->mly_event_counter = mh->next_event; 1003 1004 /* save the health status into the memory mailbox */ 1005 bcopy(mh, &sc->mly_mmbox->mmm_health.status, sizeof(*mh)); 1006 1007 debug(1, "initial change counter %d, event counter %d", mh->change_counter, mh->next_event); 1008 1009 free(mh, M_DEVBUF); 1010 return(0); 1011} 1012 1013/******************************************************************************** 1014 * Enable the memory mailbox mode. 1015 */ 1016static int 1017mly_enable_mmbox(struct mly_softc *sc) 1018{ 1019 struct mly_command_ioctl mci; 1020 u_int8_t *sp, status; 1021 int error; 1022 1023 debug_called(1); 1024 1025 /* build the ioctl and send it */ 1026 bzero(&mci, sizeof(mci)); 1027 mci.sub_ioctl = MDACIOCTL_SETMEMORYMAILBOX; 1028 /* set buffer addresses */ 1029 mci.param.setmemorymailbox.command_mailbox_physaddr = 1030 sc->mly_mmbox_busaddr + offsetof(struct mly_mmbox, mmm_command); 1031 mci.param.setmemorymailbox.status_mailbox_physaddr = 1032 sc->mly_mmbox_busaddr + offsetof(struct mly_mmbox, mmm_status); 1033 mci.param.setmemorymailbox.health_buffer_physaddr = 1034 sc->mly_mmbox_busaddr + offsetof(struct mly_mmbox, mmm_health); 1035 1036 /* set buffer sizes - abuse of data_size field is revolting */ 1037 sp = (u_int8_t *)&mci.data_size; 1038 sp[0] = ((sizeof(union mly_command_packet) * MLY_MMBOX_COMMANDS) / 1024); 1039 sp[1] = (sizeof(union mly_status_packet) * MLY_MMBOX_STATUS) / 1024; 1040 mci.param.setmemorymailbox.health_buffer_size = sizeof(union mly_health_region) / 1024; 1041 1042 debug(1, "memory mailbox at %p (0x%llx/%d 0x%llx/%d 0x%llx/%d", sc->mly_mmbox, 1043 mci.param.setmemorymailbox.command_mailbox_physaddr, sp[0], 1044 mci.param.setmemorymailbox.status_mailbox_physaddr, sp[1], 1045 mci.param.setmemorymailbox.health_buffer_physaddr, 1046 mci.param.setmemorymailbox.health_buffer_size); 1047 1048 if ((error = mly_ioctl(sc, &mci, NULL, 0, &status, NULL, NULL))) 1049 return(error); 1050 if (status != 0) 1051 return(EIO); 1052 sc->mly_state |= MLY_STATE_MMBOX_ACTIVE; 1053 debug(1, "memory mailbox active"); 1054 return(0); 1055} 1056 1057/******************************************************************************** 1058 * Flush all pending I/O from the controller. 1059 */ 1060static int 1061mly_flush(struct mly_softc *sc) 1062{ 1063 struct mly_command_ioctl mci; 1064 u_int8_t status; 1065 int error; 1066 1067 debug_called(1); 1068 1069 /* build the ioctl */ 1070 bzero(&mci, sizeof(mci)); 1071 mci.sub_ioctl = MDACIOCTL_FLUSHDEVICEDATA; 1072 mci.param.deviceoperation.operation_device = MLY_OPDEVICE_PHYSICAL_CONTROLLER; 1073 1074 /* pass it off to the controller */ 1075 if ((error = mly_ioctl(sc, &mci, NULL, 0, &status, NULL, NULL))) 1076 return(error); 1077 1078 return((status == 0) ? 0 : EIO); 1079} 1080 1081/******************************************************************************** 1082 * Perform an ioctl command. 1083 * 1084 * If (data) is not NULL, the command requires data transfer. If (*data) is NULL 1085 * the command requires data transfer from the controller, and we will allocate 1086 * a buffer for it. If (*data) is not NULL, the command requires data transfer 1087 * to the controller. 1088 * 1089 * XXX passing in the whole ioctl structure is ugly. Better ideas? 1090 * 1091 * XXX we don't even try to handle the case where datasize > 4k. We should. 1092 */ 1093static int 1094mly_ioctl(struct mly_softc *sc, struct mly_command_ioctl *ioctl, void **data, size_t datasize, 1095 u_int8_t *status, void *sense_buffer, size_t *sense_length) 1096{ 1097 struct mly_command *mc; 1098 struct mly_command_ioctl *mci; 1099 int error; 1100 1101 debug_called(1); 1102 1103 mc = NULL; 1104 if (mly_alloc_command(sc, &mc)) { 1105 error = ENOMEM; 1106 goto out; 1107 } 1108 1109 /* copy the ioctl structure, but save some important fields and then fixup */ 1110 mci = &mc->mc_packet->ioctl; 1111 ioctl->sense_buffer_address = mci->sense_buffer_address; 1112 ioctl->maximum_sense_size = mci->maximum_sense_size; 1113 *mci = *ioctl; 1114 mci->opcode = MDACMD_IOCTL; 1115 mci->timeout.value = 30; 1116 mci->timeout.scale = MLY_TIMEOUT_SECONDS; 1117 1118 /* handle the data buffer */ 1119 if (data != NULL) { 1120 if (*data == NULL) { 1121 /* allocate data buffer */ 1122 if ((mc->mc_data = malloc(datasize, M_DEVBUF, M_NOWAIT)) == NULL) { 1123 error = ENOMEM; 1124 goto out; 1125 } 1126 mc->mc_flags |= MLY_CMD_DATAIN; 1127 } else { 1128 mc->mc_data = *data; 1129 mc->mc_flags |= MLY_CMD_DATAOUT; 1130 } 1131 mc->mc_length = datasize; 1132 mc->mc_packet->generic.data_size = datasize; 1133 } 1134 1135 /* run the command */ 1136 if ((error = mly_immediate_command(mc))) 1137 goto out; 1138 1139 /* clean up and return any data */ 1140 *status = mc->mc_status; 1141 if ((mc->mc_sense > 0) && (sense_buffer != NULL)) { 1142 bcopy(mc->mc_packet, sense_buffer, mc->mc_sense); 1143 *sense_length = mc->mc_sense; 1144 goto out; 1145 } 1146 1147 /* should we return a data pointer? */ 1148 if ((data != NULL) && (*data == NULL)) 1149 *data = mc->mc_data; 1150 1151 /* command completed OK */ 1152 error = 0; 1153 1154out: 1155 if (mc != NULL) { 1156 /* do we need to free a data buffer we allocated? */ 1157 if (error && (mc->mc_data != NULL) && (*data == NULL)) 1158 free(mc->mc_data, M_DEVBUF); 1159 mly_release_command(mc); 1160 } 1161 return(error); 1162} 1163 1164/******************************************************************************** 1165 * Check for event(s) outstanding in the controller. 1166 */ 1167static void 1168mly_check_event(struct mly_softc *sc) 1169{ 1170 1171 /* 1172 * The controller may have updated the health status information, 1173 * so check for it here. Note that the counters are all in host memory, 1174 * so this check is very cheap. Also note that we depend on checking on 1175 * completion 1176 */ 1177 if (sc->mly_mmbox->mmm_health.status.change_counter != sc->mly_event_change) { 1178 sc->mly_event_change = sc->mly_mmbox->mmm_health.status.change_counter; 1179 debug(1, "event change %d, event status update, %d -> %d", sc->mly_event_change, 1180 sc->mly_event_waiting, sc->mly_mmbox->mmm_health.status.next_event); 1181 sc->mly_event_waiting = sc->mly_mmbox->mmm_health.status.next_event; 1182 1183 /* wake up anyone that might be interested in this */ 1184 wakeup(&sc->mly_event_change); 1185 } 1186 if (sc->mly_event_counter != sc->mly_event_waiting) 1187 mly_fetch_event(sc); 1188} 1189 1190/******************************************************************************** 1191 * Fetch one event from the controller. 1192 * 1193 * If we fail due to resource starvation, we'll be retried the next time a 1194 * command completes. 1195 */ 1196static void 1197mly_fetch_event(struct mly_softc *sc) 1198{ 1199 struct mly_command *mc; 1200 struct mly_command_ioctl *mci; 1201 int s; 1202 u_int32_t event; 1203 1204 debug_called(1); 1205 1206 /* get a command */ 1207 if (mly_alloc_command(sc, &mc)) 1208 return; 1209 1210 /* set up the data buffer */ 1211 if ((mc->mc_data = malloc(sizeof(struct mly_event), M_DEVBUF, M_NOWAIT | M_ZERO)) == NULL) { 1212 mly_release_command(mc); 1213 return; 1214 } 1215 mc->mc_length = sizeof(struct mly_event); 1216 mc->mc_flags |= MLY_CMD_DATAIN; 1217 mc->mc_complete = mly_complete_event; 1218 1219 /* 1220 * Get an event number to fetch. It's possible that we've raced with another 1221 * context for the last event, in which case there will be no more events. 1222 */ 1223 s = splcam(); 1224 if (sc->mly_event_counter == sc->mly_event_waiting) { 1225 mly_release_command(mc); 1226 splx(s); 1227 return; 1228 } 1229 event = sc->mly_event_counter++; 1230 splx(s); 1231 1232 /* 1233 * Build the ioctl. 1234 * 1235 * At this point we are committed to sending this request, as it 1236 * will be the only one constructed for this particular event number. 1237 */ 1238 mci = (struct mly_command_ioctl *)&mc->mc_packet->ioctl; 1239 mci->opcode = MDACMD_IOCTL; 1240 mci->data_size = sizeof(struct mly_event); 1241 mci->addr.phys.lun = (event >> 16) & 0xff; 1242 mci->addr.phys.target = (event >> 24) & 0xff; 1243 mci->addr.phys.channel = 0; 1244 mci->addr.phys.controller = 0; 1245 mci->timeout.value = 30; 1246 mci->timeout.scale = MLY_TIMEOUT_SECONDS; 1247 mci->sub_ioctl = MDACIOCTL_GETEVENT; 1248 mci->param.getevent.sequence_number_low = event & 0xffff; 1249 1250 debug(1, "fetch event %u", event); 1251 1252 /* 1253 * Submit the command. 1254 * 1255 * Note that failure of mly_start() will result in this event never being 1256 * fetched. 1257 */ 1258 if (mly_start(mc) != 0) { 1259 mly_printf(sc, "couldn't fetch event %u\n", event); 1260 mly_release_command(mc); 1261 } 1262} 1263 1264/******************************************************************************** 1265 * Handle the completion of an event poll. 1266 */ 1267static void 1268mly_complete_event(struct mly_command *mc) 1269{ 1270 struct mly_softc *sc = mc->mc_sc; 1271 struct mly_event *me = (struct mly_event *)mc->mc_data; 1272 1273 debug_called(1); 1274 1275 /* 1276 * If the event was successfully fetched, process it. 1277 */ 1278 if (mc->mc_status == SCSI_STATUS_OK) { 1279 mly_process_event(sc, me); 1280 free(me, M_DEVBUF); 1281 } 1282 mly_release_command(mc); 1283 1284 /* 1285 * Check for another event. 1286 */ 1287 mly_check_event(sc); 1288} 1289 1290/******************************************************************************** 1291 * Process a controller event. 1292 */ 1293static void 1294mly_process_event(struct mly_softc *sc, struct mly_event *me) 1295{ 1296 struct scsi_sense_data *ssd = (struct scsi_sense_data *)&me->sense[0]; 1297 char *fp, *tp; 1298 int bus, target, event, class, action; 1299 1300 /* 1301 * Errors can be reported using vendor-unique sense data. In this case, the 1302 * event code will be 0x1c (Request sense data present), the sense key will 1303 * be 0x09 (vendor specific), the MSB of the ASC will be set, and the 1304 * actual event code will be a 16-bit value comprised of the ASCQ (low byte) 1305 * and low seven bits of the ASC (low seven bits of the high byte). 1306 */ 1307 if ((me->code == 0x1c) && 1308 ((ssd->flags & SSD_KEY) == SSD_KEY_Vendor_Specific) && 1309 (ssd->add_sense_code & 0x80)) { 1310 event = ((int)(ssd->add_sense_code & ~0x80) << 8) + ssd->add_sense_code_qual; 1311 } else { 1312 event = me->code; 1313 } 1314 1315 /* look up event, get codes */ 1316 fp = mly_describe_code(mly_table_event, event); 1317 1318 debug(1, "Event %d code 0x%x", me->sequence_number, me->code); 1319 1320 /* quiet event? */ 1321 class = fp[0]; 1322 if (isupper(class) && bootverbose) 1323 class = tolower(class); 1324 1325 /* get action code, text string */ 1326 action = fp[1]; 1327 tp = &fp[2]; 1328 1329 /* 1330 * Print some information about the event. 1331 * 1332 * This code uses a table derived from the corresponding portion of the Linux 1333 * driver, and thus the parser is very similar. 1334 */ 1335 switch(class) { 1336 case 'p': /* error on physical device */ 1337 mly_printf(sc, "physical device %d:%d %s\n", me->channel, me->target, tp); 1338 if (action == 'r') 1339 sc->mly_btl[me->channel][me->target].mb_flags |= MLY_BTL_RESCAN; 1340 break; 1341 case 'l': /* error on logical unit */ 1342 case 'm': /* message about logical unit */ 1343 bus = MLY_LOGDEV_BUS(sc, me->lun); 1344 target = MLY_LOGDEV_TARGET(sc, me->lun); 1345 mly_name_device(sc, bus, target); 1346 mly_printf(sc, "logical device %d (%s) %s\n", me->lun, sc->mly_btl[bus][target].mb_name, tp); 1347 if (action == 'r') 1348 sc->mly_btl[bus][target].mb_flags |= MLY_BTL_RESCAN; 1349 break; 1350 break; 1351 case 's': /* report of sense data */ 1352 if (((ssd->flags & SSD_KEY) == SSD_KEY_NO_SENSE) || 1353 (((ssd->flags & SSD_KEY) == SSD_KEY_NOT_READY) && 1354 (ssd->add_sense_code == 0x04) && 1355 ((ssd->add_sense_code_qual == 0x01) || (ssd->add_sense_code_qual == 0x02)))) 1356 break; /* ignore NO_SENSE or NOT_READY in one case */ 1357 1358 mly_printf(sc, "physical device %d:%d %s\n", me->channel, me->target, tp); 1359 mly_printf(sc, " sense key %d asc %02x ascq %02x\n", 1360 ssd->flags & SSD_KEY, ssd->add_sense_code, ssd->add_sense_code_qual); 1361 mly_printf(sc, " info %4D csi %4D\n", ssd->info, "", ssd->cmd_spec_info, ""); 1362 if (action == 'r') 1363 sc->mly_btl[me->channel][me->target].mb_flags |= MLY_BTL_RESCAN; 1364 break; 1365 case 'e': 1366 mly_printf(sc, tp, me->target, me->lun); 1367 printf("\n"); 1368 break; 1369 case 'c': 1370 mly_printf(sc, "controller %s\n", tp); 1371 break; 1372 case '?': 1373 mly_printf(sc, "%s - %d\n", tp, me->code); 1374 break; 1375 default: /* probably a 'noisy' event being ignored */ 1376 break; 1377 } 1378} 1379 1380/******************************************************************************** 1381 * Perform periodic activities. 1382 */ 1383static void 1384mly_periodic(void *data) 1385{ 1386 struct mly_softc *sc = (struct mly_softc *)data; 1387 int bus, target; 1388 1389 debug_called(2); 1390 1391 /* 1392 * Scan devices. 1393 */ 1394 for (bus = 0; bus < sc->mly_cam_channels; bus++) { 1395 if (MLY_BUS_IS_VALID(sc, bus)) { 1396 for (target = 0; target < MLY_MAX_TARGETS; target++) { 1397 1398 /* ignore the controller in this scan */ 1399 if (target == sc->mly_controllerparam->initiator_id) 1400 continue; 1401 1402 /* perform device rescan? */ 1403 if (sc->mly_btl[bus][target].mb_flags & MLY_BTL_RESCAN) 1404 mly_rescan_btl(sc, bus, target); 1405 } 1406 } 1407 } 1408 1409 /* check for controller events */ 1410 mly_check_event(sc); 1411 1412 /* reschedule ourselves */ 1413 sc->mly_periodic = timeout(mly_periodic, sc, MLY_PERIODIC_INTERVAL * hz); 1414} 1415 1416/******************************************************************************** 1417 ******************************************************************************** 1418 Command Processing 1419 ******************************************************************************** 1420 ********************************************************************************/ 1421 1422/******************************************************************************** 1423 * Run a command and wait for it to complete. 1424 * 1425 */ 1426static int 1427mly_immediate_command(struct mly_command *mc) 1428{ 1429 struct mly_softc *sc = mc->mc_sc; 1430 int error, s; 1431 1432 debug_called(1); 1433 1434 /* spinning at splcam is ugly, but we're only used during controller init */ 1435 s = splcam(); 1436 if ((error = mly_start(mc))) { 1437 splx(s); 1438 return(error); 1439 } 1440 1441 if (sc->mly_state & MLY_STATE_INTERRUPTS_ON) { 1442 /* sleep on the command */ 1443 while(!(mc->mc_flags & MLY_CMD_COMPLETE)) { 1444 tsleep(mc, PRIBIO, "mlywait", 0); 1445 } 1446 } else { 1447 /* spin and collect status while we do */ 1448 while(!(mc->mc_flags & MLY_CMD_COMPLETE)) { 1449 mly_done(mc->mc_sc); 1450 } 1451 } 1452 splx(s); 1453 return(0); 1454} 1455 1456/******************************************************************************** 1457 * Deliver a command to the controller. 1458 * 1459 * XXX it would be good to just queue commands that we can't submit immediately 1460 * and send them later, but we probably want a wrapper for that so that 1461 * we don't hang on a failed submission for an immediate command. 1462 */ 1463static int 1464mly_start(struct mly_command *mc) 1465{ 1466 struct mly_softc *sc = mc->mc_sc; 1467 union mly_command_packet *pkt; 1468 int s; 1469 1470 debug_called(2); 1471 1472 /* 1473 * Set the command up for delivery to the controller. 1474 */ 1475 mly_map_command(mc); 1476 mc->mc_packet->generic.command_id = mc->mc_slot; 1477 1478#ifdef MLY_DEBUG 1479 mc->mc_timestamp = time_second; 1480#endif 1481 1482 s = splcam(); 1483 1484 /* 1485 * Do we have to use the hardware mailbox? 1486 */ 1487 if (!(sc->mly_state & MLY_STATE_MMBOX_ACTIVE)) { 1488 /* 1489 * Check to see if the controller is ready for us. 1490 */ 1491 if (MLY_IDBR_TRUE(sc, MLY_HM_CMDSENT)) { 1492 splx(s); 1493 return(EBUSY); 1494 } 1495 mc->mc_flags |= MLY_CMD_BUSY; 1496 1497 /* 1498 * It's ready, send the command. 1499 */ 1500 MLY_SET_MBOX(sc, sc->mly_command_mailbox, &mc->mc_packetphys); 1501 MLY_SET_REG(sc, sc->mly_idbr, MLY_HM_CMDSENT); 1502 1503 } else { /* use memory-mailbox mode */ 1504 1505 pkt = &sc->mly_mmbox->mmm_command[sc->mly_mmbox_command_index]; 1506 1507 /* check to see if the next index is free yet */ 1508 if (pkt->mmbox.flag != 0) { 1509 splx(s); 1510 return(EBUSY); 1511 } 1512 mc->mc_flags |= MLY_CMD_BUSY; 1513 1514 /* copy in new command */ 1515 bcopy(mc->mc_packet->mmbox.data, pkt->mmbox.data, sizeof(pkt->mmbox.data)); 1516 /* barrier to ensure completion of previous write before we write the flag */ 1517 bus_space_barrier(sc->mly_btag, sc->mly_bhandle, 0, 0, 1518 BUS_SPACE_BARRIER_WRITE); 1519 /* copy flag last */ 1520 pkt->mmbox.flag = mc->mc_packet->mmbox.flag; 1521 /* barrier to ensure completion of previous write before we notify the controller */ 1522 bus_space_barrier(sc->mly_btag, sc->mly_bhandle, 0, 0, 1523 BUS_SPACE_BARRIER_WRITE); 1524 1525 /* signal controller, update index */ 1526 MLY_SET_REG(sc, sc->mly_idbr, MLY_AM_CMDSENT); 1527 sc->mly_mmbox_command_index = (sc->mly_mmbox_command_index + 1) % MLY_MMBOX_COMMANDS; 1528 } 1529 1530 mly_enqueue_busy(mc); 1531 splx(s); 1532 return(0); 1533} 1534 1535/******************************************************************************** 1536 * Pick up command status from the controller, schedule a completion event 1537 */ 1538static void 1539mly_done(struct mly_softc *sc) 1540{ 1541 struct mly_command *mc; 1542 union mly_status_packet *sp; 1543 u_int16_t slot; 1544 int s, worked; 1545 1546 s = splcam(); 1547 worked = 0; 1548 1549 /* pick up hardware-mailbox commands */ 1550 if (MLY_ODBR_TRUE(sc, MLY_HM_STSREADY)) { 1551 slot = MLY_GET_REG2(sc, sc->mly_status_mailbox); 1552 if (slot < MLY_SLOT_MAX) { 1553 mc = &sc->mly_command[slot - MLY_SLOT_START]; 1554 mc->mc_status = MLY_GET_REG(sc, sc->mly_status_mailbox + 2); 1555 mc->mc_sense = MLY_GET_REG(sc, sc->mly_status_mailbox + 3); 1556 mc->mc_resid = MLY_GET_REG4(sc, sc->mly_status_mailbox + 4); 1557 mly_remove_busy(mc); 1558 mc->mc_flags &= ~MLY_CMD_BUSY; 1559 mly_enqueue_complete(mc); 1560 worked = 1; 1561 } else { 1562 /* slot 0xffff may mean "extremely bogus command" */ 1563 mly_printf(sc, "got HM completion for illegal slot %u\n", slot); 1564 } 1565 /* unconditionally acknowledge status */ 1566 MLY_SET_REG(sc, sc->mly_odbr, MLY_HM_STSREADY); 1567 MLY_SET_REG(sc, sc->mly_idbr, MLY_HM_STSACK); 1568 } 1569 1570 /* pick up memory-mailbox commands */ 1571 if (MLY_ODBR_TRUE(sc, MLY_AM_STSREADY)) { 1572 for (;;) { 1573 sp = &sc->mly_mmbox->mmm_status[sc->mly_mmbox_status_index]; 1574 1575 /* check for more status */ 1576 if (sp->mmbox.flag == 0) 1577 break; 1578 1579 /* get slot number */ 1580 slot = sp->status.command_id; 1581 if (slot < MLY_SLOT_MAX) { 1582 mc = &sc->mly_command[slot - MLY_SLOT_START]; 1583 mc->mc_status = sp->status.status; 1584 mc->mc_sense = sp->status.sense_length; 1585 mc->mc_resid = sp->status.residue; 1586 mly_remove_busy(mc); 1587 mc->mc_flags &= ~MLY_CMD_BUSY; 1588 mly_enqueue_complete(mc); 1589 worked = 1; 1590 } else { 1591 /* slot 0xffff may mean "extremely bogus command" */ 1592 mly_printf(sc, "got AM completion for illegal slot %u at %d\n", 1593 slot, sc->mly_mmbox_status_index); 1594 } 1595 1596 /* clear and move to next index */ 1597 sp->mmbox.flag = 0; 1598 sc->mly_mmbox_status_index = (sc->mly_mmbox_status_index + 1) % MLY_MMBOX_STATUS; 1599 } 1600 /* acknowledge that we have collected status value(s) */ 1601 MLY_SET_REG(sc, sc->mly_odbr, MLY_AM_STSREADY); 1602 } 1603 1604 splx(s); 1605 if (worked) { 1606 if (sc->mly_state & MLY_STATE_INTERRUPTS_ON) 1607 taskqueue_enqueue(taskqueue_swi_giant, &sc->mly_task_complete); 1608 else 1609 mly_complete(sc, 0); 1610 } 1611} 1612 1613/******************************************************************************** 1614 * Process completed commands 1615 */ 1616static void 1617mly_complete(void *context, int pending) 1618{ 1619 struct mly_softc *sc = (struct mly_softc *)context; 1620 struct mly_command *mc; 1621 void (* mc_complete)(struct mly_command *mc); 1622 1623 1624 debug_called(2); 1625 1626 /* 1627 * Spin pulling commands off the completed queue and processing them. 1628 */ 1629 while ((mc = mly_dequeue_complete(sc)) != NULL) { 1630 1631 /* 1632 * Free controller resources, mark command complete. 1633 * 1634 * Note that as soon as we mark the command complete, it may be freed 1635 * out from under us, so we need to save the mc_complete field in 1636 * order to later avoid dereferencing mc. (We would not expect to 1637 * have a polling/sleeping consumer with mc_complete != NULL). 1638 */ 1639 mly_unmap_command(mc); 1640 mc_complete = mc->mc_complete; 1641 mc->mc_flags |= MLY_CMD_COMPLETE; 1642 1643 /* 1644 * Call completion handler or wake up sleeping consumer. 1645 */ 1646 if (mc_complete != NULL) { 1647 mc_complete(mc); 1648 } else { 1649 wakeup(mc); 1650 } 1651 } 1652 1653 /* 1654 * XXX if we are deferring commands due to controller-busy status, we should 1655 * retry submitting them here. 1656 */ 1657} 1658 1659/******************************************************************************** 1660 ******************************************************************************** 1661 Command Buffer Management 1662 ******************************************************************************** 1663 ********************************************************************************/ 1664 1665/******************************************************************************** 1666 * Allocate a command. 1667 */ 1668static int 1669mly_alloc_command(struct mly_softc *sc, struct mly_command **mcp) 1670{ 1671 struct mly_command *mc; 1672 1673 debug_called(3); 1674 1675 if ((mc = mly_dequeue_free(sc)) == NULL) 1676 return(ENOMEM); 1677 1678 *mcp = mc; 1679 return(0); 1680} 1681 1682/******************************************************************************** 1683 * Release a command back to the freelist. 1684 */ 1685static void 1686mly_release_command(struct mly_command *mc) 1687{ 1688 debug_called(3); 1689 1690 /* 1691 * Fill in parts of the command that may cause confusion if 1692 * a consumer doesn't when we are later allocated. 1693 */ 1694 mc->mc_data = NULL; 1695 mc->mc_flags = 0; 1696 mc->mc_complete = NULL; 1697 mc->mc_private = NULL; 1698 1699 /* 1700 * By default, we set up to overwrite the command packet with 1701 * sense information. 1702 */ 1703 mc->mc_packet->generic.sense_buffer_address = mc->mc_packetphys; 1704 mc->mc_packet->generic.maximum_sense_size = sizeof(union mly_command_packet); 1705 1706 mly_enqueue_free(mc); 1707} 1708 1709/******************************************************************************** 1710 * Map helper for command allocation. 1711 */ 1712static void 1713mly_alloc_commands_map(void *arg, bus_dma_segment_t *segs, int nseg, int error) 1714{ 1715 struct mly_softc *sc = (struct mly_softc *)arg; 1716 1717 debug_called(1); 1718 1719 sc->mly_packetphys = segs[0].ds_addr; 1720} 1721 1722/******************************************************************************** 1723 * Allocate and initialise command and packet structures. 1724 * 1725 * If the controller supports fewer than MLY_MAX_COMMANDS commands, limit our 1726 * allocation to that number. If we don't yet know how many commands the 1727 * controller supports, allocate a very small set (suitable for initialisation 1728 * purposes only). 1729 */ 1730static int 1731mly_alloc_commands(struct mly_softc *sc) 1732{ 1733 struct mly_command *mc; 1734 int i, ncmd; 1735 1736 if (sc->mly_controllerinfo == NULL) { 1737 ncmd = 4; 1738 } else { 1739 ncmd = min(MLY_MAX_COMMANDS, sc->mly_controllerinfo->maximum_parallel_commands); 1740 } 1741 1742 /* 1743 * Allocate enough space for all the command packets in one chunk and 1744 * map them permanently into controller-visible space. 1745 */ 1746 if (bus_dmamem_alloc(sc->mly_packet_dmat, (void **)&sc->mly_packet, 1747 BUS_DMA_NOWAIT, &sc->mly_packetmap)) { 1748 return(ENOMEM); 1749 } 1750 if (bus_dmamap_load(sc->mly_packet_dmat, sc->mly_packetmap, sc->mly_packet, 1751 ncmd * sizeof(union mly_command_packet), 1752 mly_alloc_commands_map, sc, BUS_DMA_NOWAIT) != 0) 1753 return (ENOMEM); 1754 1755 for (i = 0; i < ncmd; i++) { 1756 mc = &sc->mly_command[i]; 1757 bzero(mc, sizeof(*mc)); 1758 mc->mc_sc = sc; 1759 mc->mc_slot = MLY_SLOT_START + i; 1760 mc->mc_packet = sc->mly_packet + i; 1761 mc->mc_packetphys = sc->mly_packetphys + (i * sizeof(union mly_command_packet)); 1762 if (!bus_dmamap_create(sc->mly_buffer_dmat, 0, &mc->mc_datamap)) 1763 mly_release_command(mc); 1764 } 1765 return(0); 1766} 1767 1768/******************************************************************************** 1769 * Free all the storage held by commands. 1770 * 1771 * Must be called with all commands on the free list. 1772 */ 1773static void 1774mly_release_commands(struct mly_softc *sc) 1775{ 1776 struct mly_command *mc; 1777 1778 /* throw away command buffer DMA maps */ 1779 while (mly_alloc_command(sc, &mc) == 0) 1780 bus_dmamap_destroy(sc->mly_buffer_dmat, mc->mc_datamap); 1781 1782 /* release the packet storage */ 1783 if (sc->mly_packet != NULL) { 1784 bus_dmamap_unload(sc->mly_packet_dmat, sc->mly_packetmap); 1785 bus_dmamem_free(sc->mly_packet_dmat, sc->mly_packet, sc->mly_packetmap); 1786 sc->mly_packet = NULL; 1787 } 1788} 1789 1790 1791/******************************************************************************** 1792 * Command-mapping helper function - populate this command's s/g table 1793 * with the s/g entries for its data. 1794 */ 1795static void 1796mly_map_command_sg(void *arg, bus_dma_segment_t *segs, int nseg, int error) 1797{ 1798 struct mly_command *mc = (struct mly_command *)arg; 1799 struct mly_softc *sc = mc->mc_sc; 1800 struct mly_command_generic *gen = &(mc->mc_packet->generic); 1801 struct mly_sg_entry *sg; 1802 int i, tabofs; 1803 1804 debug_called(2); 1805 1806 /* can we use the transfer structure directly? */ 1807 if (nseg <= 2) { 1808 sg = &gen->transfer.direct.sg[0]; 1809 gen->command_control.extended_sg_table = 0; 1810 } else { 1811 tabofs = ((mc->mc_slot - MLY_SLOT_START) * MLY_MAX_SGENTRIES); 1812 sg = sc->mly_sg_table + tabofs; 1813 gen->transfer.indirect.entries[0] = nseg; 1814 gen->transfer.indirect.table_physaddr[0] = sc->mly_sg_busaddr + (tabofs * sizeof(struct mly_sg_entry)); 1815 gen->command_control.extended_sg_table = 1; 1816 } 1817 1818 /* copy the s/g table */ 1819 for (i = 0; i < nseg; i++) { 1820 sg[i].physaddr = segs[i].ds_addr; 1821 sg[i].length = segs[i].ds_len; 1822 } 1823 1824} 1825 1826#if 0 1827/******************************************************************************** 1828 * Command-mapping helper function - save the cdb's physical address. 1829 * 1830 * We don't support 'large' SCSI commands at this time, so this is unused. 1831 */ 1832static void 1833mly_map_command_cdb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 1834{ 1835 struct mly_command *mc = (struct mly_command *)arg; 1836 1837 debug_called(2); 1838 1839 /* XXX can we safely assume that a CDB will never cross a page boundary? */ 1840 if ((segs[0].ds_addr % PAGE_SIZE) > 1841 ((segs[0].ds_addr + mc->mc_packet->scsi_large.cdb_length) % PAGE_SIZE)) 1842 panic("cdb crosses page boundary"); 1843 1844 /* fix up fields in the command packet */ 1845 mc->mc_packet->scsi_large.cdb_physaddr = segs[0].ds_addr; 1846} 1847#endif 1848 1849/******************************************************************************** 1850 * Map a command into controller-visible space 1851 */ 1852static void 1853mly_map_command(struct mly_command *mc) 1854{ 1855 struct mly_softc *sc = mc->mc_sc; 1856 1857 debug_called(2); 1858 1859 /* don't map more than once */ 1860 if (mc->mc_flags & MLY_CMD_MAPPED) 1861 return; 1862 1863 /* does the command have a data buffer? */ 1864 if (mc->mc_data != NULL) { 1865 bus_dmamap_load(sc->mly_buffer_dmat, mc->mc_datamap, mc->mc_data, mc->mc_length, 1866 mly_map_command_sg, mc, 0); 1867 1868 if (mc->mc_flags & MLY_CMD_DATAIN) 1869 bus_dmamap_sync(sc->mly_buffer_dmat, mc->mc_datamap, BUS_DMASYNC_PREREAD); 1870 if (mc->mc_flags & MLY_CMD_DATAOUT) 1871 bus_dmamap_sync(sc->mly_buffer_dmat, mc->mc_datamap, BUS_DMASYNC_PREWRITE); 1872 } 1873 mc->mc_flags |= MLY_CMD_MAPPED; 1874} 1875 1876/******************************************************************************** 1877 * Unmap a command from controller-visible space 1878 */ 1879static void 1880mly_unmap_command(struct mly_command *mc) 1881{ 1882 struct mly_softc *sc = mc->mc_sc; 1883 1884 debug_called(2); 1885 1886 if (!(mc->mc_flags & MLY_CMD_MAPPED)) 1887 return; 1888 1889 /* does the command have a data buffer? */ 1890 if (mc->mc_data != NULL) { 1891 if (mc->mc_flags & MLY_CMD_DATAIN) 1892 bus_dmamap_sync(sc->mly_buffer_dmat, mc->mc_datamap, BUS_DMASYNC_POSTREAD); 1893 if (mc->mc_flags & MLY_CMD_DATAOUT) 1894 bus_dmamap_sync(sc->mly_buffer_dmat, mc->mc_datamap, BUS_DMASYNC_POSTWRITE); 1895 1896 bus_dmamap_unload(sc->mly_buffer_dmat, mc->mc_datamap); 1897 } 1898 mc->mc_flags &= ~MLY_CMD_MAPPED; 1899} 1900 1901 1902/******************************************************************************** 1903 ******************************************************************************** 1904 CAM interface 1905 ******************************************************************************** 1906 ********************************************************************************/ 1907 1908/******************************************************************************** 1909 * Attach the physical and virtual SCSI busses to CAM. 1910 * 1911 * Physical bus numbering starts from 0, virtual bus numbering from one greater 1912 * than the highest physical bus. Physical busses are only registered if 1913 * the kernel environment variable "hw.mly.register_physical_channels" is set. 1914 * 1915 * When we refer to a "bus", we are referring to the bus number registered with 1916 * the SIM, wheras a "channel" is a channel number given to the adapter. In order 1917 * to keep things simple, we map these 1:1, so "bus" and "channel" may be used 1918 * interchangeably. 1919 */ 1920static int 1921mly_cam_attach(struct mly_softc *sc) 1922{ 1923 struct cam_devq *devq; 1924 int chn, i; 1925 1926 debug_called(1); 1927 1928 /* 1929 * Allocate a devq for all our channels combined. 1930 */ 1931 if ((devq = cam_simq_alloc(sc->mly_controllerinfo->maximum_parallel_commands)) == NULL) { 1932 mly_printf(sc, "can't allocate CAM SIM queue\n"); 1933 return(ENOMEM); 1934 } 1935 1936 /* 1937 * If physical channel registration has been requested, register these first. 1938 * Note that we enable tagged command queueing for physical channels. 1939 */ 1940 if (testenv("hw.mly.register_physical_channels")) { 1941 chn = 0; 1942 for (i = 0; i < sc->mly_controllerinfo->physical_channels_present; i++, chn++) { 1943 1944 if ((sc->mly_cam_sim[chn] = cam_sim_alloc(mly_cam_action, mly_cam_poll, "mly", sc, 1945 device_get_unit(sc->mly_dev), 1946 sc->mly_controllerinfo->maximum_parallel_commands, 1947 1, devq)) == NULL) { 1948 return(ENOMEM); 1949 } 1950 if (xpt_bus_register(sc->mly_cam_sim[chn], chn)) { 1951 mly_printf(sc, "CAM XPT phsyical channel registration failed\n"); 1952 return(ENXIO); 1953 } 1954 debug(1, "registered physical channel %d", chn); 1955 } 1956 } 1957 1958 /* 1959 * Register our virtual channels, with bus numbers matching channel numbers. 1960 */ 1961 chn = sc->mly_controllerinfo->physical_channels_present; 1962 for (i = 0; i < sc->mly_controllerinfo->virtual_channels_present; i++, chn++) { 1963 if ((sc->mly_cam_sim[chn] = cam_sim_alloc(mly_cam_action, mly_cam_poll, "mly", sc, 1964 device_get_unit(sc->mly_dev), 1965 sc->mly_controllerinfo->maximum_parallel_commands, 1966 0, devq)) == NULL) { 1967 return(ENOMEM); 1968 } 1969 if (xpt_bus_register(sc->mly_cam_sim[chn], chn)) { 1970 mly_printf(sc, "CAM XPT virtual channel registration failed\n"); 1971 return(ENXIO); 1972 } 1973 debug(1, "registered virtual channel %d", chn); 1974 } 1975 1976 /* 1977 * This is the total number of channels that (might have been) registered with 1978 * CAM. Some may not have been; check the mly_cam_sim array to be certain. 1979 */ 1980 sc->mly_cam_channels = sc->mly_controllerinfo->physical_channels_present + 1981 sc->mly_controllerinfo->virtual_channels_present; 1982 1983 return(0); 1984} 1985 1986/******************************************************************************** 1987 * Detach from CAM 1988 */ 1989static void 1990mly_cam_detach(struct mly_softc *sc) 1991{ 1992 int i; 1993 1994 debug_called(1); 1995 1996 for (i = 0; i < sc->mly_cam_channels; i++) { 1997 if (sc->mly_cam_sim[i] != NULL) { 1998 xpt_bus_deregister(cam_sim_path(sc->mly_cam_sim[i])); 1999 cam_sim_free(sc->mly_cam_sim[i], 0); 2000 } 2001 } 2002 if (sc->mly_cam_devq != NULL) 2003 cam_simq_free(sc->mly_cam_devq); 2004} 2005 2006/************************************************************************ 2007 * Rescan a device. 2008 */ 2009static void 2010mly_cam_rescan_btl(struct mly_softc *sc, int bus, int target) 2011{ 2012 union ccb *ccb; 2013 2014 debug_called(1); 2015 2016 if ((ccb = malloc(sizeof(union ccb), M_TEMP, M_WAITOK | M_ZERO)) == NULL) { 2017 mly_printf(sc, "rescan failed (can't allocate CCB)\n"); 2018 return; 2019 } 2020 2021 if (xpt_create_path(&sc->mly_cam_path, xpt_periph, 2022 cam_sim_path(sc->mly_cam_sim[bus]), target, 0) != CAM_REQ_CMP) { 2023 mly_printf(sc, "rescan failed (can't create path)\n"); 2024 free(ccb, M_TEMP); 2025 return; 2026 } 2027 xpt_setup_ccb(&ccb->ccb_h, sc->mly_cam_path, 5/*priority (low)*/); 2028 ccb->ccb_h.func_code = XPT_SCAN_LUN; 2029 ccb->ccb_h.cbfcnp = mly_cam_rescan_callback; 2030 ccb->crcn.flags = CAM_FLAG_NONE; 2031 debug(1, "rescan target %d:%d", bus, target); 2032 xpt_action(ccb); 2033} 2034 2035static void 2036mly_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb) 2037{ 2038 free(ccb, M_TEMP); 2039} 2040 2041/******************************************************************************** 2042 * Handle an action requested by CAM 2043 */ 2044static void 2045mly_cam_action(struct cam_sim *sim, union ccb *ccb) 2046{ 2047 struct mly_softc *sc = cam_sim_softc(sim); 2048 2049 debug_called(2); 2050 2051 switch (ccb->ccb_h.func_code) { 2052 2053 /* perform SCSI I/O */ 2054 case XPT_SCSI_IO: 2055 if (!mly_cam_action_io(sim, (struct ccb_scsiio *)&ccb->csio)) 2056 return; 2057 break; 2058 2059 /* perform geometry calculations */ 2060 case XPT_CALC_GEOMETRY: 2061 { 2062 struct ccb_calc_geometry *ccg = &ccb->ccg; 2063 u_int32_t secs_per_cylinder; 2064 2065 debug(2, "XPT_CALC_GEOMETRY %d:%d:%d", cam_sim_bus(sim), ccb->ccb_h.target_id, ccb->ccb_h.target_lun); 2066 2067 if (sc->mly_controllerparam->bios_geometry == MLY_BIOSGEOM_8G) { 2068 ccg->heads = 255; 2069 ccg->secs_per_track = 63; 2070 } else { /* MLY_BIOSGEOM_2G */ 2071 ccg->heads = 128; 2072 ccg->secs_per_track = 32; 2073 } 2074 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 2075 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 2076 ccb->ccb_h.status = CAM_REQ_CMP; 2077 break; 2078 } 2079 2080 /* handle path attribute inquiry */ 2081 case XPT_PATH_INQ: 2082 { 2083 struct ccb_pathinq *cpi = &ccb->cpi; 2084 2085 debug(2, "XPT_PATH_INQ %d:%d:%d", cam_sim_bus(sim), ccb->ccb_h.target_id, ccb->ccb_h.target_lun); 2086 2087 cpi->version_num = 1; 2088 cpi->hba_inquiry = PI_TAG_ABLE; /* XXX extra flags for physical channels? */ 2089 cpi->target_sprt = 0; 2090 cpi->hba_misc = 0; 2091 cpi->max_target = MLY_MAX_TARGETS - 1; 2092 cpi->max_lun = MLY_MAX_LUNS - 1; 2093 cpi->initiator_id = sc->mly_controllerparam->initiator_id; 2094 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2095 strncpy(cpi->hba_vid, "FreeBSD", HBA_IDLEN); 2096 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2097 cpi->unit_number = cam_sim_unit(sim); 2098 cpi->bus_id = cam_sim_bus(sim); 2099 cpi->base_transfer_speed = 132 * 1024; /* XXX what to set this to? */ 2100 cpi->transport = XPORT_SPI; 2101 cpi->transport_version = 2; 2102 cpi->protocol = PROTO_SCSI; 2103 cpi->protocol_version = SCSI_REV_2; 2104 ccb->ccb_h.status = CAM_REQ_CMP; 2105 break; 2106 } 2107 2108 case XPT_GET_TRAN_SETTINGS: 2109 { 2110 struct ccb_trans_settings *cts = &ccb->cts; 2111 int bus, target; 2112 struct ccb_trans_settings_scsi *scsi = &cts->proto_specific.scsi; 2113 struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; 2114 2115 cts->protocol = PROTO_SCSI; 2116 cts->protocol_version = SCSI_REV_2; 2117 cts->transport = XPORT_SPI; 2118 cts->transport_version = 2; 2119 2120 scsi->flags = 0; 2121 scsi->valid = 0; 2122 spi->flags = 0; 2123 spi->valid = 0; 2124 2125 bus = cam_sim_bus(sim); 2126 target = cts->ccb_h.target_id; 2127 debug(2, "XPT_GET_TRAN_SETTINGS %d:%d", bus, target); 2128 /* logical device? */ 2129 if (sc->mly_btl[bus][target].mb_flags & MLY_BTL_LOGICAL) { 2130 /* nothing special for these */ 2131 /* physical device? */ 2132 } else if (sc->mly_btl[bus][target].mb_flags & MLY_BTL_PHYSICAL) { 2133 /* allow CAM to try tagged transactions */ 2134 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 2135 scsi->valid |= CTS_SCSI_VALID_TQ; 2136 2137 /* convert speed (MHz) to usec */ 2138 if (sc->mly_btl[bus][target].mb_speed == 0) { 2139 spi->sync_period = 1000000 / 5; 2140 } else { 2141 spi->sync_period = 1000000 / sc->mly_btl[bus][target].mb_speed; 2142 } 2143 2144 /* convert bus width to CAM internal encoding */ 2145 switch (sc->mly_btl[bus][target].mb_width) { 2146 case 32: 2147 spi->bus_width = MSG_EXT_WDTR_BUS_32_BIT; 2148 break; 2149 case 16: 2150 spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT; 2151 break; 2152 case 8: 2153 default: 2154 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; 2155 break; 2156 } 2157 spi->valid |= CTS_SPI_VALID_SYNC_RATE | CTS_SPI_VALID_BUS_WIDTH; 2158 2159 /* not a device, bail out */ 2160 } else { 2161 cts->ccb_h.status = CAM_REQ_CMP_ERR; 2162 break; 2163 } 2164 2165 /* disconnect always OK */ 2166 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 2167 spi->valid |= CTS_SPI_VALID_DISC; 2168 2169 cts->ccb_h.status = CAM_REQ_CMP; 2170 break; 2171 } 2172 2173 default: /* we can't do this */ 2174 debug(2, "unspported func_code = 0x%x", ccb->ccb_h.func_code); 2175 ccb->ccb_h.status = CAM_REQ_INVALID; 2176 break; 2177 } 2178 2179 xpt_done(ccb); 2180} 2181 2182/******************************************************************************** 2183 * Handle an I/O operation requested by CAM 2184 */ 2185static int 2186mly_cam_action_io(struct cam_sim *sim, struct ccb_scsiio *csio) 2187{ 2188 struct mly_softc *sc = cam_sim_softc(sim); 2189 struct mly_command *mc; 2190 struct mly_command_scsi_small *ss; 2191 int bus, target; 2192 int error; 2193 int s; 2194 2195 bus = cam_sim_bus(sim); 2196 target = csio->ccb_h.target_id; 2197 2198 debug(2, "XPT_SCSI_IO %d:%d:%d", bus, target, csio->ccb_h.target_lun); 2199 2200 /* validate bus number */ 2201 if (!MLY_BUS_IS_VALID(sc, bus)) { 2202 debug(0, " invalid bus %d", bus); 2203 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2204 } 2205 2206 /* check for I/O attempt to a protected device */ 2207 if (sc->mly_btl[bus][target].mb_flags & MLY_BTL_PROTECTED) { 2208 debug(2, " device protected"); 2209 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2210 } 2211 2212 /* check for I/O attempt to nonexistent device */ 2213 if (!(sc->mly_btl[bus][target].mb_flags & (MLY_BTL_LOGICAL | MLY_BTL_PHYSICAL))) { 2214 debug(2, " device %d:%d does not exist", bus, target); 2215 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2216 } 2217 2218 /* XXX increase if/when we support large SCSI commands */ 2219 if (csio->cdb_len > MLY_CMD_SCSI_SMALL_CDB) { 2220 debug(0, " command too large (%d > %d)", csio->cdb_len, MLY_CMD_SCSI_SMALL_CDB); 2221 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2222 } 2223 2224 /* check that the CDB pointer is not to a physical address */ 2225 if ((csio->ccb_h.flags & CAM_CDB_POINTER) && (csio->ccb_h.flags & CAM_CDB_PHYS)) { 2226 debug(0, " CDB pointer is to physical address"); 2227 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2228 } 2229 2230 /* if there is data transfer, it must be to/from a virtual address */ 2231 if ((csio->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 2232 if (csio->ccb_h.flags & CAM_DATA_PHYS) { /* we can't map it */ 2233 debug(0, " data pointer is to physical address"); 2234 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2235 } 2236 if (csio->ccb_h.flags & CAM_SCATTER_VALID) { /* we want to do the s/g setup */ 2237 debug(0, " data has premature s/g setup"); 2238 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2239 } 2240 } 2241 2242 /* abandon aborted ccbs or those that have failed validation */ 2243 if ((csio->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 2244 debug(2, "abandoning CCB due to abort/validation failure"); 2245 return(EINVAL); 2246 } 2247 2248 /* 2249 * Get a command, or push the ccb back to CAM and freeze the queue. 2250 */ 2251 if ((error = mly_alloc_command(sc, &mc))) { 2252 s = splcam(); 2253 xpt_freeze_simq(sim, 1); 2254 csio->ccb_h.status |= CAM_REQUEUE_REQ; 2255 sc->mly_qfrzn_cnt++; 2256 splx(s); 2257 return(error); 2258 } 2259 2260 /* build the command */ 2261 mc->mc_data = csio->data_ptr; 2262 mc->mc_length = csio->dxfer_len; 2263 mc->mc_complete = mly_cam_complete; 2264 mc->mc_private = csio; 2265 2266 /* save the bus number in the ccb for later recovery XXX should be a better way */ 2267 csio->ccb_h.sim_priv.entries[0].field = bus; 2268 2269 /* build the packet for the controller */ 2270 ss = &mc->mc_packet->scsi_small; 2271 ss->opcode = MDACMD_SCSI; 2272 if (csio->ccb_h.flags & CAM_DIS_DISCONNECT) 2273 ss->command_control.disable_disconnect = 1; 2274 if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) 2275 ss->command_control.data_direction = MLY_CCB_WRITE; 2276 ss->data_size = csio->dxfer_len; 2277 ss->addr.phys.lun = csio->ccb_h.target_lun; 2278 ss->addr.phys.target = csio->ccb_h.target_id; 2279 ss->addr.phys.channel = bus; 2280 if (csio->ccb_h.timeout < (60 * 1000)) { 2281 ss->timeout.value = csio->ccb_h.timeout / 1000; 2282 ss->timeout.scale = MLY_TIMEOUT_SECONDS; 2283 } else if (csio->ccb_h.timeout < (60 * 60 * 1000)) { 2284 ss->timeout.value = csio->ccb_h.timeout / (60 * 1000); 2285 ss->timeout.scale = MLY_TIMEOUT_MINUTES; 2286 } else { 2287 ss->timeout.value = csio->ccb_h.timeout / (60 * 60 * 1000); /* overflow? */ 2288 ss->timeout.scale = MLY_TIMEOUT_HOURS; 2289 } 2290 ss->maximum_sense_size = csio->sense_len; 2291 ss->cdb_length = csio->cdb_len; 2292 if (csio->ccb_h.flags & CAM_CDB_POINTER) { 2293 bcopy(csio->cdb_io.cdb_ptr, ss->cdb, csio->cdb_len); 2294 } else { 2295 bcopy(csio->cdb_io.cdb_bytes, ss->cdb, csio->cdb_len); 2296 } 2297 2298 /* give the command to the controller */ 2299 if ((error = mly_start(mc))) { 2300 s = splcam(); 2301 xpt_freeze_simq(sim, 1); 2302 csio->ccb_h.status |= CAM_REQUEUE_REQ; 2303 sc->mly_qfrzn_cnt++; 2304 splx(s); 2305 return(error); 2306 } 2307 2308 return(0); 2309} 2310 2311/******************************************************************************** 2312 * Check for possibly-completed commands. 2313 */ 2314static void 2315mly_cam_poll(struct cam_sim *sim) 2316{ 2317 struct mly_softc *sc = cam_sim_softc(sim); 2318 2319 debug_called(2); 2320 2321 mly_done(sc); 2322} 2323 2324/******************************************************************************** 2325 * Handle completion of a command - pass results back through the CCB 2326 */ 2327static void 2328mly_cam_complete(struct mly_command *mc) 2329{ 2330 struct mly_softc *sc = mc->mc_sc; 2331 struct ccb_scsiio *csio = (struct ccb_scsiio *)mc->mc_private; 2332 struct scsi_inquiry_data *inq = (struct scsi_inquiry_data *)csio->data_ptr; 2333 struct mly_btl *btl; 2334 u_int8_t cmd; 2335 int bus, target; 2336 int s; 2337 2338 debug_called(2); 2339 2340 csio->scsi_status = mc->mc_status; 2341 switch(mc->mc_status) { 2342 case SCSI_STATUS_OK: 2343 /* 2344 * In order to report logical device type and status, we overwrite 2345 * the result of the INQUIRY command to logical devices. 2346 */ 2347 bus = csio->ccb_h.sim_priv.entries[0].field; 2348 target = csio->ccb_h.target_id; 2349 /* XXX validate bus/target? */ 2350 if (sc->mly_btl[bus][target].mb_flags & MLY_BTL_LOGICAL) { 2351 if (csio->ccb_h.flags & CAM_CDB_POINTER) { 2352 cmd = *csio->cdb_io.cdb_ptr; 2353 } else { 2354 cmd = csio->cdb_io.cdb_bytes[0]; 2355 } 2356 if (cmd == INQUIRY) { 2357 btl = &sc->mly_btl[bus][target]; 2358 padstr(inq->vendor, mly_describe_code(mly_table_device_type, btl->mb_type), 8); 2359 padstr(inq->product, mly_describe_code(mly_table_device_state, btl->mb_state), 16); 2360 padstr(inq->revision, "", 4); 2361 } 2362 } 2363 2364 debug(2, "SCSI_STATUS_OK"); 2365 csio->ccb_h.status = CAM_REQ_CMP; 2366 break; 2367 2368 case SCSI_STATUS_CHECK_COND: 2369 debug(1, "SCSI_STATUS_CHECK_COND sense %d resid %d", mc->mc_sense, mc->mc_resid); 2370 csio->ccb_h.status = CAM_SCSI_STATUS_ERROR; 2371 bzero(&csio->sense_data, SSD_FULL_SIZE); 2372 bcopy(mc->mc_packet, &csio->sense_data, mc->mc_sense); 2373 csio->sense_len = mc->mc_sense; 2374 csio->ccb_h.status |= CAM_AUTOSNS_VALID; 2375 csio->resid = mc->mc_resid; /* XXX this is a signed value... */ 2376 break; 2377 2378 case SCSI_STATUS_BUSY: 2379 debug(1, "SCSI_STATUS_BUSY"); 2380 csio->ccb_h.status = CAM_SCSI_BUSY; 2381 break; 2382 2383 default: 2384 debug(1, "unknown status 0x%x", csio->scsi_status); 2385 csio->ccb_h.status = CAM_REQ_CMP_ERR; 2386 break; 2387 } 2388 2389 s = splcam(); 2390 if (sc->mly_qfrzn_cnt) { 2391 csio->ccb_h.status |= CAM_RELEASE_SIMQ; 2392 sc->mly_qfrzn_cnt--; 2393 } 2394 splx(s); 2395 2396 xpt_done((union ccb *)csio); 2397 mly_release_command(mc); 2398} 2399 2400/******************************************************************************** 2401 * Find a peripheral attahed at (bus),(target) 2402 */ 2403static struct cam_periph * 2404mly_find_periph(struct mly_softc *sc, int bus, int target) 2405{ 2406 struct cam_periph *periph; 2407 struct cam_path *path; 2408 int status; 2409 2410 status = xpt_create_path(&path, NULL, cam_sim_path(sc->mly_cam_sim[bus]), target, 0); 2411 if (status == CAM_REQ_CMP) { 2412 periph = cam_periph_find(path, NULL); 2413 xpt_free_path(path); 2414 } else { 2415 periph = NULL; 2416 } 2417 return(periph); 2418} 2419 2420/******************************************************************************** 2421 * Name the device at (bus)(target) 2422 */ 2423static int 2424mly_name_device(struct mly_softc *sc, int bus, int target) 2425{ 2426 struct cam_periph *periph; 2427 2428 if ((periph = mly_find_periph(sc, bus, target)) != NULL) { 2429 sprintf(sc->mly_btl[bus][target].mb_name, "%s%d", periph->periph_name, periph->unit_number); 2430 return(0); 2431 } 2432 sc->mly_btl[bus][target].mb_name[0] = 0; 2433 return(ENOENT); 2434} 2435 2436/******************************************************************************** 2437 ******************************************************************************** 2438 Hardware Control 2439 ******************************************************************************** 2440 ********************************************************************************/ 2441 2442/******************************************************************************** 2443 * Handshake with the firmware while the card is being initialised. 2444 */ 2445static int 2446mly_fwhandshake(struct mly_softc *sc) 2447{ 2448 u_int8_t error, param0, param1; 2449 int spinup = 0; 2450 2451 debug_called(1); 2452 2453 /* set HM_STSACK and let the firmware initialise */ 2454 MLY_SET_REG(sc, sc->mly_idbr, MLY_HM_STSACK); 2455 DELAY(1000); /* too short? */ 2456 2457 /* if HM_STSACK is still true, the controller is initialising */ 2458 if (!MLY_IDBR_TRUE(sc, MLY_HM_STSACK)) 2459 return(0); 2460 mly_printf(sc, "controller initialisation started\n"); 2461 2462 /* spin waiting for initialisation to finish, or for a message to be delivered */ 2463 while (MLY_IDBR_TRUE(sc, MLY_HM_STSACK)) { 2464 /* check for a message */ 2465 if (MLY_ERROR_VALID(sc)) { 2466 error = MLY_GET_REG(sc, sc->mly_error_status) & ~MLY_MSG_EMPTY; 2467 param0 = MLY_GET_REG(sc, sc->mly_command_mailbox); 2468 param1 = MLY_GET_REG(sc, sc->mly_command_mailbox + 1); 2469 2470 switch(error) { 2471 case MLY_MSG_SPINUP: 2472 if (!spinup) { 2473 mly_printf(sc, "drive spinup in progress\n"); 2474 spinup = 1; /* only print this once (should print drive being spun?) */ 2475 } 2476 break; 2477 case MLY_MSG_RACE_RECOVERY_FAIL: 2478 mly_printf(sc, "mirror race recovery failed, one or more drives offline\n"); 2479 break; 2480 case MLY_MSG_RACE_IN_PROGRESS: 2481 mly_printf(sc, "mirror race recovery in progress\n"); 2482 break; 2483 case MLY_MSG_RACE_ON_CRITICAL: 2484 mly_printf(sc, "mirror race recovery on a critical drive\n"); 2485 break; 2486 case MLY_MSG_PARITY_ERROR: 2487 mly_printf(sc, "FATAL MEMORY PARITY ERROR\n"); 2488 return(ENXIO); 2489 default: 2490 mly_printf(sc, "unknown initialisation code 0x%x\n", error); 2491 } 2492 } 2493 } 2494 return(0); 2495} 2496 2497/******************************************************************************** 2498 ******************************************************************************** 2499 Debugging and Diagnostics 2500 ******************************************************************************** 2501 ********************************************************************************/ 2502 2503/******************************************************************************** 2504 * Print some information about the controller. 2505 */ 2506static void 2507mly_describe_controller(struct mly_softc *sc) 2508{ 2509 struct mly_ioctl_getcontrollerinfo *mi = sc->mly_controllerinfo; 2510 2511 mly_printf(sc, "%16s, %d channel%s, firmware %d.%02d-%d-%02d (%02d%02d%02d%02d), %dMB RAM\n", 2512 mi->controller_name, mi->physical_channels_present, (mi->physical_channels_present) > 1 ? "s" : "", 2513 mi->fw_major, mi->fw_minor, mi->fw_turn, mi->fw_build, /* XXX turn encoding? */ 2514 mi->fw_century, mi->fw_year, mi->fw_month, mi->fw_day, 2515 mi->memory_size); 2516 2517 if (bootverbose) { 2518 mly_printf(sc, "%s %s (%x), %dMHz %d-bit %.16s\n", 2519 mly_describe_code(mly_table_oemname, mi->oem_information), 2520 mly_describe_code(mly_table_controllertype, mi->controller_type), mi->controller_type, 2521 mi->interface_speed, mi->interface_width, mi->interface_name); 2522 mly_printf(sc, "%dMB %dMHz %d-bit %s%s%s, cache %dMB\n", 2523 mi->memory_size, mi->memory_speed, mi->memory_width, 2524 mly_describe_code(mly_table_memorytype, mi->memory_type), 2525 mi->memory_parity ? "+parity": "",mi->memory_ecc ? "+ECC": "", 2526 mi->cache_size); 2527 mly_printf(sc, "CPU: %s @ %dMHZ\n", 2528 mly_describe_code(mly_table_cputype, mi->cpu[0].type), mi->cpu[0].speed); 2529 if (mi->l2cache_size != 0) 2530 mly_printf(sc, "%dKB L2 cache\n", mi->l2cache_size); 2531 if (mi->exmemory_size != 0) 2532 mly_printf(sc, "%dMB %dMHz %d-bit private %s%s%s\n", 2533 mi->exmemory_size, mi->exmemory_speed, mi->exmemory_width, 2534 mly_describe_code(mly_table_memorytype, mi->exmemory_type), 2535 mi->exmemory_parity ? "+parity": "",mi->exmemory_ecc ? "+ECC": ""); 2536 mly_printf(sc, "battery backup %s\n", mi->bbu_present ? "present" : "not installed"); 2537 mly_printf(sc, "maximum data transfer %d blocks, maximum sg entries/command %d\n", 2538 mi->maximum_block_count, mi->maximum_sg_entries); 2539 mly_printf(sc, "logical devices present/critical/offline %d/%d/%d\n", 2540 mi->logical_devices_present, mi->logical_devices_critical, mi->logical_devices_offline); 2541 mly_printf(sc, "physical devices present %d\n", 2542 mi->physical_devices_present); 2543 mly_printf(sc, "physical disks present/offline %d/%d\n", 2544 mi->physical_disks_present, mi->physical_disks_offline); 2545 mly_printf(sc, "%d physical channel%s, %d virtual channel%s of %d possible\n", 2546 mi->physical_channels_present, mi->physical_channels_present == 1 ? "" : "s", 2547 mi->virtual_channels_present, mi->virtual_channels_present == 1 ? "" : "s", 2548 mi->virtual_channels_possible); 2549 mly_printf(sc, "%d parallel commands supported\n", mi->maximum_parallel_commands); 2550 mly_printf(sc, "%dMB flash ROM, %d of %d maximum cycles\n", 2551 mi->flash_size, mi->flash_age, mi->flash_maximum_age); 2552 } 2553} 2554 2555#ifdef MLY_DEBUG 2556/******************************************************************************** 2557 * Print some controller state 2558 */ 2559static void 2560mly_printstate(struct mly_softc *sc) 2561{ 2562 mly_printf(sc, "IDBR %02x ODBR %02x ERROR %02x (%x %x %x)\n", 2563 MLY_GET_REG(sc, sc->mly_idbr), 2564 MLY_GET_REG(sc, sc->mly_odbr), 2565 MLY_GET_REG(sc, sc->mly_error_status), 2566 sc->mly_idbr, 2567 sc->mly_odbr, 2568 sc->mly_error_status); 2569 mly_printf(sc, "IMASK %02x ISTATUS %02x\n", 2570 MLY_GET_REG(sc, sc->mly_interrupt_mask), 2571 MLY_GET_REG(sc, sc->mly_interrupt_status)); 2572 mly_printf(sc, "COMMAND %02x %02x %02x %02x %02x %02x %02x %02x\n", 2573 MLY_GET_REG(sc, sc->mly_command_mailbox), 2574 MLY_GET_REG(sc, sc->mly_command_mailbox + 1), 2575 MLY_GET_REG(sc, sc->mly_command_mailbox + 2), 2576 MLY_GET_REG(sc, sc->mly_command_mailbox + 3), 2577 MLY_GET_REG(sc, sc->mly_command_mailbox + 4), 2578 MLY_GET_REG(sc, sc->mly_command_mailbox + 5), 2579 MLY_GET_REG(sc, sc->mly_command_mailbox + 6), 2580 MLY_GET_REG(sc, sc->mly_command_mailbox + 7)); 2581 mly_printf(sc, "STATUS %02x %02x %02x %02x %02x %02x %02x %02x\n", 2582 MLY_GET_REG(sc, sc->mly_status_mailbox), 2583 MLY_GET_REG(sc, sc->mly_status_mailbox + 1), 2584 MLY_GET_REG(sc, sc->mly_status_mailbox + 2), 2585 MLY_GET_REG(sc, sc->mly_status_mailbox + 3), 2586 MLY_GET_REG(sc, sc->mly_status_mailbox + 4), 2587 MLY_GET_REG(sc, sc->mly_status_mailbox + 5), 2588 MLY_GET_REG(sc, sc->mly_status_mailbox + 6), 2589 MLY_GET_REG(sc, sc->mly_status_mailbox + 7)); 2590 mly_printf(sc, " %04x %08x\n", 2591 MLY_GET_REG2(sc, sc->mly_status_mailbox), 2592 MLY_GET_REG4(sc, sc->mly_status_mailbox + 4)); 2593} 2594 2595struct mly_softc *mly_softc0 = NULL; 2596void 2597mly_printstate0(void) 2598{ 2599 if (mly_softc0 != NULL) 2600 mly_printstate(mly_softc0); 2601} 2602 2603/******************************************************************************** 2604 * Print a command 2605 */ 2606static void 2607mly_print_command(struct mly_command *mc) 2608{ 2609 struct mly_softc *sc = mc->mc_sc; 2610 2611 mly_printf(sc, "COMMAND @ %p\n", mc); 2612 mly_printf(sc, " slot %d\n", mc->mc_slot); 2613 mly_printf(sc, " status 0x%x\n", mc->mc_status); 2614 mly_printf(sc, " sense len %d\n", mc->mc_sense); 2615 mly_printf(sc, " resid %d\n", mc->mc_resid); 2616 mly_printf(sc, " packet %p/0x%llx\n", mc->mc_packet, mc->mc_packetphys); 2617 if (mc->mc_packet != NULL) 2618 mly_print_packet(mc); 2619 mly_printf(sc, " data %p/%d\n", mc->mc_data, mc->mc_length); 2620 mly_printf(sc, " flags %b\n", mc->mc_flags, "\20\1busy\2complete\3slotted\4mapped\5datain\6dataout\n"); 2621 mly_printf(sc, " complete %p\n", mc->mc_complete); 2622 mly_printf(sc, " private %p\n", mc->mc_private); 2623} 2624 2625/******************************************************************************** 2626 * Print a command packet 2627 */ 2628static void 2629mly_print_packet(struct mly_command *mc) 2630{ 2631 struct mly_softc *sc = mc->mc_sc; 2632 struct mly_command_generic *ge = (struct mly_command_generic *)mc->mc_packet; 2633 struct mly_command_scsi_small *ss = (struct mly_command_scsi_small *)mc->mc_packet; 2634 struct mly_command_scsi_large *sl = (struct mly_command_scsi_large *)mc->mc_packet; 2635 struct mly_command_ioctl *io = (struct mly_command_ioctl *)mc->mc_packet; 2636 int transfer; 2637 2638 mly_printf(sc, " command_id %d\n", ge->command_id); 2639 mly_printf(sc, " opcode %d\n", ge->opcode); 2640 mly_printf(sc, " command_control fua %d dpo %d est %d dd %s nas %d ddis %d\n", 2641 ge->command_control.force_unit_access, 2642 ge->command_control.disable_page_out, 2643 ge->command_control.extended_sg_table, 2644 (ge->command_control.data_direction == MLY_CCB_WRITE) ? "WRITE" : "READ", 2645 ge->command_control.no_auto_sense, 2646 ge->command_control.disable_disconnect); 2647 mly_printf(sc, " data_size %d\n", ge->data_size); 2648 mly_printf(sc, " sense_buffer_address 0x%llx\n", ge->sense_buffer_address); 2649 mly_printf(sc, " lun %d\n", ge->addr.phys.lun); 2650 mly_printf(sc, " target %d\n", ge->addr.phys.target); 2651 mly_printf(sc, " channel %d\n", ge->addr.phys.channel); 2652 mly_printf(sc, " logical device %d\n", ge->addr.log.logdev); 2653 mly_printf(sc, " controller %d\n", ge->addr.phys.controller); 2654 mly_printf(sc, " timeout %d %s\n", 2655 ge->timeout.value, 2656 (ge->timeout.scale == MLY_TIMEOUT_SECONDS) ? "seconds" : 2657 ((ge->timeout.scale == MLY_TIMEOUT_MINUTES) ? "minutes" : "hours")); 2658 mly_printf(sc, " maximum_sense_size %d\n", ge->maximum_sense_size); 2659 switch(ge->opcode) { 2660 case MDACMD_SCSIPT: 2661 case MDACMD_SCSI: 2662 mly_printf(sc, " cdb length %d\n", ss->cdb_length); 2663 mly_printf(sc, " cdb %*D\n", ss->cdb_length, ss->cdb, " "); 2664 transfer = 1; 2665 break; 2666 case MDACMD_SCSILC: 2667 case MDACMD_SCSILCPT: 2668 mly_printf(sc, " cdb length %d\n", sl->cdb_length); 2669 mly_printf(sc, " cdb 0x%llx\n", sl->cdb_physaddr); 2670 transfer = 1; 2671 break; 2672 case MDACMD_IOCTL: 2673 mly_printf(sc, " sub_ioctl 0x%x\n", io->sub_ioctl); 2674 switch(io->sub_ioctl) { 2675 case MDACIOCTL_SETMEMORYMAILBOX: 2676 mly_printf(sc, " health_buffer_size %d\n", 2677 io->param.setmemorymailbox.health_buffer_size); 2678 mly_printf(sc, " health_buffer_phys 0x%llx\n", 2679 io->param.setmemorymailbox.health_buffer_physaddr); 2680 mly_printf(sc, " command_mailbox 0x%llx\n", 2681 io->param.setmemorymailbox.command_mailbox_physaddr); 2682 mly_printf(sc, " status_mailbox 0x%llx\n", 2683 io->param.setmemorymailbox.status_mailbox_physaddr); 2684 transfer = 0; 2685 break; 2686 2687 case MDACIOCTL_SETREALTIMECLOCK: 2688 case MDACIOCTL_GETHEALTHSTATUS: 2689 case MDACIOCTL_GETCONTROLLERINFO: 2690 case MDACIOCTL_GETLOGDEVINFOVALID: 2691 case MDACIOCTL_GETPHYSDEVINFOVALID: 2692 case MDACIOCTL_GETPHYSDEVSTATISTICS: 2693 case MDACIOCTL_GETLOGDEVSTATISTICS: 2694 case MDACIOCTL_GETCONTROLLERSTATISTICS: 2695 case MDACIOCTL_GETBDT_FOR_SYSDRIVE: 2696 case MDACIOCTL_CREATENEWCONF: 2697 case MDACIOCTL_ADDNEWCONF: 2698 case MDACIOCTL_GETDEVCONFINFO: 2699 case MDACIOCTL_GETFREESPACELIST: 2700 case MDACIOCTL_MORE: 2701 case MDACIOCTL_SETPHYSDEVPARAMETER: 2702 case MDACIOCTL_GETPHYSDEVPARAMETER: 2703 case MDACIOCTL_GETLOGDEVPARAMETER: 2704 case MDACIOCTL_SETLOGDEVPARAMETER: 2705 mly_printf(sc, " param %10D\n", io->param.data.param, " "); 2706 transfer = 1; 2707 break; 2708 2709 case MDACIOCTL_GETEVENT: 2710 mly_printf(sc, " event %d\n", 2711 io->param.getevent.sequence_number_low + ((u_int32_t)io->addr.log.logdev << 16)); 2712 transfer = 1; 2713 break; 2714 2715 case MDACIOCTL_SETRAIDDEVSTATE: 2716 mly_printf(sc, " state %d\n", io->param.setraiddevstate.state); 2717 transfer = 0; 2718 break; 2719 2720 case MDACIOCTL_XLATEPHYSDEVTORAIDDEV: 2721 mly_printf(sc, " raid_device %d\n", io->param.xlatephysdevtoraiddev.raid_device); 2722 mly_printf(sc, " controller %d\n", io->param.xlatephysdevtoraiddev.controller); 2723 mly_printf(sc, " channel %d\n", io->param.xlatephysdevtoraiddev.channel); 2724 mly_printf(sc, " target %d\n", io->param.xlatephysdevtoraiddev.target); 2725 mly_printf(sc, " lun %d\n", io->param.xlatephysdevtoraiddev.lun); 2726 transfer = 0; 2727 break; 2728 2729 case MDACIOCTL_GETGROUPCONFINFO: 2730 mly_printf(sc, " group %d\n", io->param.getgroupconfinfo.group); 2731 transfer = 1; 2732 break; 2733 2734 case MDACIOCTL_GET_SUBSYSTEM_DATA: 2735 case MDACIOCTL_SET_SUBSYSTEM_DATA: 2736 case MDACIOCTL_STARTDISOCVERY: 2737 case MDACIOCTL_INITPHYSDEVSTART: 2738 case MDACIOCTL_INITPHYSDEVSTOP: 2739 case MDACIOCTL_INITRAIDDEVSTART: 2740 case MDACIOCTL_INITRAIDDEVSTOP: 2741 case MDACIOCTL_REBUILDRAIDDEVSTART: 2742 case MDACIOCTL_REBUILDRAIDDEVSTOP: 2743 case MDACIOCTL_MAKECONSISTENTDATASTART: 2744 case MDACIOCTL_MAKECONSISTENTDATASTOP: 2745 case MDACIOCTL_CONSISTENCYCHECKSTART: 2746 case MDACIOCTL_CONSISTENCYCHECKSTOP: 2747 case MDACIOCTL_RESETDEVICE: 2748 case MDACIOCTL_FLUSHDEVICEDATA: 2749 case MDACIOCTL_PAUSEDEVICE: 2750 case MDACIOCTL_UNPAUSEDEVICE: 2751 case MDACIOCTL_LOCATEDEVICE: 2752 case MDACIOCTL_SETMASTERSLAVEMODE: 2753 case MDACIOCTL_DELETERAIDDEV: 2754 case MDACIOCTL_REPLACEINTERNALDEV: 2755 case MDACIOCTL_CLEARCONF: 2756 case MDACIOCTL_GETCONTROLLERPARAMETER: 2757 case MDACIOCTL_SETCONTRLLERPARAMETER: 2758 case MDACIOCTL_CLEARCONFSUSPMODE: 2759 case MDACIOCTL_STOREIMAGE: 2760 case MDACIOCTL_READIMAGE: 2761 case MDACIOCTL_FLASHIMAGES: 2762 case MDACIOCTL_RENAMERAIDDEV: 2763 default: /* no idea what to print */ 2764 transfer = 0; 2765 break; 2766 } 2767 break; 2768 2769 case MDACMD_IOCTLCHECK: 2770 case MDACMD_MEMCOPY: 2771 default: 2772 transfer = 0; 2773 break; /* print nothing */ 2774 } 2775 if (transfer) { 2776 if (ge->command_control.extended_sg_table) { 2777 mly_printf(sc, " sg table 0x%llx/%d\n", 2778 ge->transfer.indirect.table_physaddr[0], ge->transfer.indirect.entries[0]); 2779 } else { 2780 mly_printf(sc, " 0000 0x%llx/%lld\n", 2781 ge->transfer.direct.sg[0].physaddr, ge->transfer.direct.sg[0].length); 2782 mly_printf(sc, " 0001 0x%llx/%lld\n", 2783 ge->transfer.direct.sg[1].physaddr, ge->transfer.direct.sg[1].length); 2784 } 2785 } 2786} 2787 2788/******************************************************************************** 2789 * Panic in a slightly informative fashion 2790 */ 2791static void 2792mly_panic(struct mly_softc *sc, char *reason) 2793{ 2794 mly_printstate(sc); 2795 panic(reason); 2796} 2797 2798/******************************************************************************** 2799 * Print queue statistics, callable from DDB. 2800 */ 2801void 2802mly_print_controller(int controller) 2803{ 2804 struct mly_softc *sc; 2805 2806 if ((sc = devclass_get_softc(devclass_find("mly"), controller)) == NULL) { 2807 printf("mly: controller %d invalid\n", controller); 2808 } else { 2809 device_printf(sc->mly_dev, "queue curr max\n"); 2810 device_printf(sc->mly_dev, "free %04d/%04d\n", 2811 sc->mly_qstat[MLYQ_FREE].q_length, sc->mly_qstat[MLYQ_FREE].q_max); 2812 device_printf(sc->mly_dev, "busy %04d/%04d\n", 2813 sc->mly_qstat[MLYQ_BUSY].q_length, sc->mly_qstat[MLYQ_BUSY].q_max); 2814 device_printf(sc->mly_dev, "complete %04d/%04d\n", 2815 sc->mly_qstat[MLYQ_COMPLETE].q_length, sc->mly_qstat[MLYQ_COMPLETE].q_max); 2816 } 2817} 2818#endif 2819 2820 2821/******************************************************************************** 2822 ******************************************************************************** 2823 Control device interface 2824 ******************************************************************************** 2825 ********************************************************************************/ 2826 2827/******************************************************************************** 2828 * Accept an open operation on the control device. 2829 */ 2830static int 2831mly_user_open(struct cdev *dev, int flags, int fmt, struct thread *td) 2832{ 2833 int unit = minor(dev); 2834 struct mly_softc *sc = devclass_get_softc(devclass_find("mly"), unit); 2835 2836 sc->mly_state |= MLY_STATE_OPEN; 2837 return(0); 2838} 2839 2840/******************************************************************************** 2841 * Accept the last close on the control device. 2842 */ 2843static int 2844mly_user_close(struct cdev *dev, int flags, int fmt, struct thread *td) 2845{ 2846 int unit = minor(dev); 2847 struct mly_softc *sc = devclass_get_softc(devclass_find("mly"), unit); 2848 2849 sc->mly_state &= ~MLY_STATE_OPEN; 2850 return (0); 2851} 2852 2853/******************************************************************************** 2854 * Handle controller-specific control operations. 2855 */ 2856static int 2857mly_user_ioctl(struct cdev *dev, u_long cmd, caddr_t addr, 2858 int32_t flag, struct thread *td) 2859{ 2860 struct mly_softc *sc = (struct mly_softc *)dev->si_drv1; 2861 struct mly_user_command *uc = (struct mly_user_command *)addr; 2862 struct mly_user_health *uh = (struct mly_user_health *)addr; 2863 2864 switch(cmd) { 2865 case MLYIO_COMMAND: 2866 return(mly_user_command(sc, uc)); 2867 case MLYIO_HEALTH: 2868 return(mly_user_health(sc, uh)); 2869 default: 2870 return(ENOIOCTL); 2871 } 2872} 2873 2874/******************************************************************************** 2875 * Execute a command passed in from userspace. 2876 * 2877 * The control structure contains the actual command for the controller, as well 2878 * as the user-space data pointer and data size, and an optional sense buffer 2879 * size/pointer. On completion, the data size is adjusted to the command 2880 * residual, and the sense buffer size to the size of the returned sense data. 2881 * 2882 */ 2883static int 2884mly_user_command(struct mly_softc *sc, struct mly_user_command *uc) 2885{ 2886 struct mly_command *mc; 2887 int error, s; 2888 2889 /* allocate a command */ 2890 if (mly_alloc_command(sc, &mc)) { 2891 error = ENOMEM; 2892 goto out; /* XXX Linux version will wait for a command */ 2893 } 2894 2895 /* handle data size/direction */ 2896 mc->mc_length = (uc->DataTransferLength >= 0) ? uc->DataTransferLength : -uc->DataTransferLength; 2897 if (mc->mc_length > 0) { 2898 if ((mc->mc_data = malloc(mc->mc_length, M_DEVBUF, M_NOWAIT)) == NULL) { 2899 error = ENOMEM; 2900 goto out; 2901 } 2902 } 2903 if (uc->DataTransferLength > 0) { 2904 mc->mc_flags |= MLY_CMD_DATAIN; 2905 bzero(mc->mc_data, mc->mc_length); 2906 } 2907 if (uc->DataTransferLength < 0) { 2908 mc->mc_flags |= MLY_CMD_DATAOUT; 2909 if ((error = copyin(uc->DataTransferBuffer, mc->mc_data, mc->mc_length)) != 0) 2910 goto out; 2911 } 2912 2913 /* copy the controller command */ 2914 bcopy(&uc->CommandMailbox, mc->mc_packet, sizeof(uc->CommandMailbox)); 2915 2916 /* clear command completion handler so that we get woken up */ 2917 mc->mc_complete = NULL; 2918 2919 /* execute the command */ 2920 if ((error = mly_start(mc)) != 0) 2921 goto out; 2922 s = splcam(); 2923 while (!(mc->mc_flags & MLY_CMD_COMPLETE)) 2924 tsleep(mc, PRIBIO, "mlyioctl", 0); 2925 splx(s); 2926 2927 /* return the data to userspace */ 2928 if (uc->DataTransferLength > 0) 2929 if ((error = copyout(mc->mc_data, uc->DataTransferBuffer, mc->mc_length)) != 0) 2930 goto out; 2931 2932 /* return the sense buffer to userspace */ 2933 if ((uc->RequestSenseLength > 0) && (mc->mc_sense > 0)) { 2934 if ((error = copyout(mc->mc_packet, uc->RequestSenseBuffer, 2935 min(uc->RequestSenseLength, mc->mc_sense))) != 0) 2936 goto out; 2937 } 2938 2939 /* return command results to userspace (caller will copy out) */ 2940 uc->DataTransferLength = mc->mc_resid; 2941 uc->RequestSenseLength = min(uc->RequestSenseLength, mc->mc_sense); 2942 uc->CommandStatus = mc->mc_status; 2943 error = 0; 2944 2945 out: 2946 if (mc->mc_data != NULL) 2947 free(mc->mc_data, M_DEVBUF); 2948 if (mc != NULL) 2949 mly_release_command(mc); 2950 return(error); 2951} 2952 2953/******************************************************************************** 2954 * Return health status to userspace. If the health change index in the user 2955 * structure does not match that currently exported by the controller, we 2956 * return the current status immediately. Otherwise, we block until either 2957 * interrupted or new status is delivered. 2958 */ 2959static int 2960mly_user_health(struct mly_softc *sc, struct mly_user_health *uh) 2961{ 2962 struct mly_health_status mh; 2963 int error, s; 2964 2965 /* fetch the current health status from userspace */ 2966 if ((error = copyin(uh->HealthStatusBuffer, &mh, sizeof(mh))) != 0) 2967 return(error); 2968 2969 /* spin waiting for a status update */ 2970 s = splcam(); 2971 error = EWOULDBLOCK; 2972 while ((error != 0) && (sc->mly_event_change == mh.change_counter)) 2973 error = tsleep(&sc->mly_event_change, PRIBIO | PCATCH, "mlyhealth", 0); 2974 splx(s); 2975 2976 /* copy the controller's health status buffer out (there is a race here if it changes again) */ 2977 error = copyout(&sc->mly_mmbox->mmm_health.status, uh->HealthStatusBuffer, 2978 sizeof(uh->HealthStatusBuffer)); 2979 return(error); 2980} 2981 2982static int 2983mly_timeout(struct mly_softc *sc) 2984{ 2985 struct mly_command *mc; 2986 int deadline; 2987 2988 deadline = time_second - MLY_CMD_TIMEOUT; 2989 TAILQ_FOREACH(mc, &sc->mly_busy, mc_link) { 2990 if ((mc->mc_timestamp < deadline)) { 2991 device_printf(sc->mly_dev, 2992 "COMMAND %p TIMEOUT AFTER %d SECONDS\n", mc, 2993 (int)(time_second - mc->mc_timestamp)); 2994 } 2995 } 2996 2997 timeout((timeout_t *)mly_timeout, sc, MLY_CMD_TIMEOUT * hz); 2998 2999 return (0); 3000} 3001