/linux-master/drivers/media/rc/ |
H A D | ir-xmp-decoder.c | 45 dev_dbg(&dev->dev, "XMP decode started at state %d %d (%uus %s)\n", 81 dev_dbg(&dev->dev, "received TRAILER period at index %d: %u\n", 95 dev_dbg(&dev->dev, "divider to small %d.\n", 110 dev_dbg(&dev->dev, "checksum errors sum1=0x%X sum2=0x%X\n", 124 dev_dbg(&dev->dev, "subaddress nibbles mismatch 0x%02X != 0x%02X\n", 130 dev_dbg(&dev->dev, "Warning: OEM nibbles 0x%02X. Expected 0x44\n", 135 dev_dbg(&dev->dev, "XMP scancode 0x%06x\n", scancode); 141 dev_dbg(&dev->dev, "Repeat last key\n"); 150 dev_dbg(&dev->dev, "received half frame pulse at index %d. Probably a final frame key-up event: %u\n", 161 dev_dbg( [all...] |
/linux-master/drivers/base/ |
H A D | pinctrl.c | 34 dev_dbg(dev, "no pinctrl handle\n"); 42 dev_dbg(dev, "no default pinctrl state\n"); 51 dev_dbg(dev, "no init pinctrl state\n"); 60 dev_dbg(dev, "failed to activate initial pinctrl state\n"); 74 dev_dbg(dev, "no sleep pinctrl state\n"); 80 dev_dbg(dev, "no idle pinctrl state\n");
|
/linux-master/drivers/platform/x86/amd/pmf/ |
H A D | spc.c | 35 dev_dbg(dev->dev, "==== TA inputs START ====\n"); 36 dev_dbg(dev->dev, "Slider State: %s\n", ta_slider_as_str(in->ev_info.power_slider)); 37 dev_dbg(dev->dev, "Power Source: %s\n", amd_pmf_source_as_str(in->ev_info.power_source)); 38 dev_dbg(dev->dev, "Battery Percentage: %u\n", in->ev_info.bat_percentage); 39 dev_dbg(dev->dev, "Designed Battery Capacity: %u\n", in->ev_info.bat_design); 40 dev_dbg(dev->dev, "Fully Charged Capacity: %u\n", in->ev_info.full_charge_capacity); 41 dev_dbg(dev->dev, "Drain Rate: %d\n", in->ev_info.drain_rate); 42 dev_dbg(dev->dev, "Socket Power: %u\n", in->ev_info.socket_power); 43 dev_dbg(dev->dev, "Skin Temperature: %u\n", in->ev_info.skin_temperature); 44 dev_dbg(de [all...] |
/linux-master/drivers/net/arcnet/ |
H A D | com20020_cs.c | 119 dev_dbg(&p_dev->dev, "com20020_attach()\n"); 166 dev_dbg(&link->dev, "detach...\n"); 168 dev_dbg(&link->dev, "com20020_detach\n"); 170 dev_dbg(&link->dev, "unregister...\n"); 183 dev_dbg(&link->dev, "unlinking...\n"); 187 dev_dbg(&link->dev, "kfree...\n"); 190 dev_dbg(&link->dev, "kfree2...\n"); 207 dev_dbg(&link->dev, "config...\n"); 209 dev_dbg(&link->dev, "com20020_config\n"); 211 dev_dbg( [all...] |
/linux-master/drivers/media/i2c/ |
H A D | ccs-pll.c | 55 dev_dbg(dev, "%s_%s out of bounds: %d (%d--%d)\n", prefix, 90 dev_dbg(dev, "ext_clk_freq_hz\t\t%u\n", pll->ext_clk_freq_hz); 97 dev_dbg(dev, "%s_pre_pll_clk_div\t\t%u\n", s, 99 dev_dbg(dev, "%s_pll_multiplier\t\t%u\n", s, 102 dev_dbg(dev, "%s_pll_ip_clk_freq_hz\t%u\n", s, 104 dev_dbg(dev, "%s_pll_op_clk_freq_hz\t%u\n", s, 110 dev_dbg(dev, "%s_sys_clk_div\t\t%u\n", s, 112 dev_dbg(dev, "%s_pix_clk_div\t\t%u\n", s, 115 dev_dbg(dev, "%s_sys_clk_freq_hz\t%u\n", s, 117 dev_dbg(de [all...] |
/linux-master/drivers/usb/host/ |
H A D | ehci-ps3.c | 99 dev_dbg(&dev->core, "%s:%d: ps3_open_hv_device failed\n", 107 dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: " 116 dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n", 122 dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__, 128 dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n", 141 dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__, 151 dev_dbg(&dev->core, "%s:%d: request_mem_region failed\n", 157 dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__, 163 dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__, 165 dev_dbg( [all...] |
H A D | ohci-ps3.c | 82 dev_dbg(&dev->core, "%s:%d: ps3_open_hv_device failed: %s\n", 91 dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: " 100 dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n", 106 dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__, 112 dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n", 125 dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__, 135 dev_dbg(&dev->core, "%s:%d: request_mem_region failed\n", 141 dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__, 147 dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__, 149 dev_dbg( [all...] |
/linux-master/drivers/media/platform/nxp/imx-jpeg/ |
H A D | mxc-jpeg-hw.c | 18 dev_dbg(dev, "Wrapper reg %s = 0x%x\n", reg_name, val);\ 23 dev_dbg(dev, " MXC JPEG NEXT_DESCPT_PTR 0x%x\n", 25 dev_dbg(dev, " MXC JPEG BUF_BASE0 0x%x\n", desc->buf_base0); 26 dev_dbg(dev, " MXC JPEG BUF_BASE1 0x%x\n", desc->buf_base1); 27 dev_dbg(dev, " MXC JPEG LINE_PITCH %d\n", desc->line_pitch); 28 dev_dbg(dev, " MXC JPEG STM_BUFBASE 0x%x\n", desc->stm_bufbase); 29 dev_dbg(dev, " MXC JPEG STM_BUFSIZE %d\n", desc->stm_bufsize); 30 dev_dbg(dev, " MXC JPEG IMGSIZE %x (%d x %d)\n", desc->imgsize, 32 dev_dbg(dev, " MXC JPEG STM_CTRL 0x%x\n", desc->stm_ctrl); 38 dev_dbg(de [all...] |
/linux-master/drivers/ps3/ |
H A D | ps3-sys-manager.c | 266 dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, attr); 303 dev_dbg(&dev->core, "%s:%d: (%xh)\n", __func__, __LINE__, op); 345 dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__); 382 dev_dbg(&dev->core, "%s:%d: (%s)\n", __func__, __LINE__, 420 dev_dbg(&dev->core, "%s:%d: unsupported event version (%u)\n", 427 dev_dbg(&dev->core, "%s:%d: POWER_PRESSED (%s)\n", 441 dev_dbg(&dev->core, "%s:%d: POWER_RELEASED (%u ms)\n", 445 dev_dbg(&dev->core, "%s:%d: RESET_PRESSED (%s)\n", 459 dev_dbg(&dev->core, "%s:%d: RESET_RELEASED (%u ms)\n", 463 dev_dbg( [all...] |
H A D | ps3-vuart.c | 155 dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n", 164 dev_dbg(&dev->core, "%s:%d: tx_buf_size failed: %s\n", 173 dev_dbg(&dev->core, "%s:%d: rx_trigger failed: %s\n", 180 dev_dbg(&dev->core, "%s:%d: tx %lxh, rx %lxh\n", __func__, __LINE__, 196 dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n", 205 dev_dbg(&dev->core, "%s:%d: tx_buf_size failed: %s\n", 214 dev_dbg(&dev->core, "%s:%d: rx_trigger failed: %s\n", 219 dev_dbg(&dev->core, "%s:%d: tx %xh, rx %xh\n", __func__, __LINE__, 234 dev_dbg(&dev->core, "%s:%d: rx_bytes failed: %s\n", 237 dev_dbg( [all...] |
/linux-master/drivers/usb/serial/ |
H A D | io_edgeport.c | 355 dev_dbg(dev, "Current Boot Image version %d.%d.%d\n", 362 dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n", 368 dev_dbg(dev, "Downloading new Boot Image\n"); 387 dev_dbg(dev, "Boot Image -- already up to date\n"); 398 dev_dbg(dev, "**Product Information:\n"); 399 dev_dbg(dev, " ProductId %x\n", product_info->ProductId); 400 dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts); 401 dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer); 402 dev_dbg(dev, " IsServer %d\n", product_info->IsServer); 403 dev_dbg(de [all...] |
H A D | kobil_sct.c | 129 dev_dbg(&serial->dev->dev, "KOBIL B1 PRO / KAAN PRO detected\n"); 132 dev_dbg(&serial->dev->dev, "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); 135 dev_dbg(&serial->dev->dev, "KOBIL USBTWIN detected\n"); 138 dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n"); 191 dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result); 193 dev_dbg(dev, "Hardware version: %i.%i.%i\n", transfer_buffer[0], 208 dev_dbg(dev, "%s - Send get_FW_version URB returns: %i\n", __func__, result); 210 dev_dbg(dev, "Firmware version: %i.%i.%i\n", transfer_buffer[0], 228 dev_dbg(dev, "%s - Send set_baudrate URB returns: %i\n", __func__, result); 241 dev_dbg(de [all...] |
/linux-master/drivers/usb/dwc2/ |
H A D | core.c | 41 dev_dbg(hsotg->dev, "%s\n", __func__); 73 dev_dbg(hsotg->dev, "%s\n", __func__); 158 dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__); 267 dev_dbg(hsotg->dev, 271 dev_dbg(hsotg->dev, "restore done generated here\n"); 508 dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device"); 557 dev_dbg(hsotg->dev, "Clearing force mode bits\n"); 604 dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n"); 624 dev_dbg(hsotg->dev, "Host Global Registers\n"); 626 dev_dbg(hsot [all...] |
H A D | core_intr.c | 90 dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, 94 dev_dbg(hsotg->dev, 110 dev_dbg(hsotg->dev, "Session End Detected\n"); 129 dev_dbg(hsotg->dev, 189 dev_dbg(hsotg->dev, "HNP Failed\n"); 202 dev_dbg(hsotg->dev, 206 dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", 225 dev_dbg(hsotg->dev, 228 dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); 256 dev_dbg(hsot [all...] |
/linux-master/drivers/char/xilinx_hwicap/ |
H A D | fifo_icap.c | 96 dev_dbg(drvdata->dev, "fifo_write: %x\n", data); 109 dev_dbg(drvdata->dev, "fifo_read: %x\n", data); 131 dev_dbg(drvdata->dev, "configuration started\n"); 141 dev_dbg(drvdata->dev, "readback started\n"); 163 dev_dbg(drvdata->dev, "Getting status = %x\n", status); 221 dev_dbg(drvdata->dev, "fifo_set_configuration\n"); 268 dev_dbg(drvdata->dev, "done fifo_set_configuration\n"); 299 dev_dbg(drvdata->dev, "fifo_get_configuration\n"); 344 dev_dbg(drvdata->dev, "done fifo_get_configuration\n");
|
/linux-master/include/sound/ |
H A D | simple_card_utils.h | 213 dev_dbg(dev, "%s dai name = %s\n", 217 dev_dbg(dev, "%s slots = %d\n", name, dai->slots); 219 dev_dbg(dev, "%s slot width = %d\n", name, dai->slot_width); 221 dev_dbg(dev, "%s tx slot mask = %d\n", name, dai->tx_slot_mask); 223 dev_dbg(dev, "%s rx slot mask = %d\n", name, dai->rx_slot_mask); 225 dev_dbg(dev, "%s clk %luHz\n", name, clk_get_rate(dai->clk)); 227 dev_dbg(dev, "%s sysclk = %dHz\n", 230 dev_dbg(dev, "%s direction = %s\n", 242 dev_dbg(dev, "Card Name: %s\n", card->name); 251 dev_dbg(de [all...] |
/linux-master/drivers/char/ |
H A D | nsc_gpio.c | 63 dev_dbg(dev, "GPIO%d output enabled\n", m); 67 dev_dbg(dev, "GPIO%d output disabled\n", m); 71 dev_dbg(dev, "GPIO%d output is push pull\n", m); 75 dev_dbg(dev, "GPIO%d output is open drain\n", m); 79 dev_dbg(dev, "GPIO%d pull up enabled\n", m); 83 dev_dbg(dev, "GPIO%d pull up disabled\n", m);
|
/linux-master/drivers/net/ethernet/amd/xgbe/ |
H A D | xgbe-pci.c | 158 dev_dbg(pdata->dev, "multi %s interrupts enabled\n", 189 dev_dbg(pdata->dev, "single %s interrupt enabled\n", 196 dev_dbg(pdata->dev, " dev irq=%d\n", pdata->dev_irq); 197 dev_dbg(pdata->dev, " ecc irq=%d\n", pdata->ecc_irq); 198 dev_dbg(pdata->dev, " i2c irq=%d\n", pdata->i2c_irq); 199 dev_dbg(pdata->dev, " an irq=%d\n", pdata->an_irq); 201 dev_dbg(pdata->dev, " dma%u irq=%d\n", 261 dev_dbg(dev, "xgmac_regs = %p\n", pdata->xgmac_regs); 262 dev_dbg(dev, "xprop_regs = %p\n", pdata->xprop_regs); 263 dev_dbg(de [all...] |
/linux-master/drivers/rtc/ |
H A D | rtc-meson-vrtc.c | 25 dev_dbg(dev, "%s\n", __func__); 42 dev_dbg(dev, "%s: alarm->enabled=%d\n", __func__, alarm->enabled); 93 dev_dbg(dev, "%s\n", __func__); 102 dev_dbg(dev, "alarm_time = %lus, local_time=%lus\n", 107 dev_dbg(dev, "system will wakeup in %lds.\n", 122 dev_dbg(dev, "%s\n", __func__);
|
H A D | rtc-nct3018y.c | 56 dev_dbg(&client->dev, "%s:on:%d\n", __func__, on); 60 dev_dbg(&client->dev, 73 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n"); 79 dev_dbg(&client->dev, 87 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_ST\n"); 100 dev_dbg(&client->dev, "%s:NCT3018Y_REG_CTRL\n", __func__); 105 dev_dbg(&client->dev, "%s:alarm_enable:%x\n", __func__, *alarm_enable); 110 dev_dbg(&client->dev, "%s:NCT3018Y_REG_ST\n", __func__); 115 dev_dbg(&client->dev, "%s:alarm_flag:%x\n", __func__, *alarm_flag); 129 dev_dbg( [all...] |
/linux-master/drivers/i2c/busses/ |
H A D | i2c-ismt.c | 208 dev_dbg(dev, "Descriptor struct: %p\n", desc); 209 dev_dbg(dev, "\ttgtaddr_rw=0x%02X\n", desc->tgtaddr_rw); 210 dev_dbg(dev, "\twr_len_cmd=0x%02X\n", desc->wr_len_cmd); 211 dev_dbg(dev, "\trd_len= 0x%02X\n", desc->rd_len); 212 dev_dbg(dev, "\tcontrol= 0x%02X\n", desc->control); 213 dev_dbg(dev, "\tstatus= 0x%02X\n", desc->status); 214 dev_dbg(dev, "\tretry= 0x%02X\n", desc->retry); 215 dev_dbg(dev, "\trxbytes= 0x%02X\n", desc->rxbytes); 216 dev_dbg(dev, "\ttxbytes= 0x%02X\n", desc->txbytes); 217 dev_dbg(de [all...] |
/linux-master/drivers/usb/gadget/udc/bdc/ |
H A D | bdc_cmd.c | 37 dev_dbg(bdc->dev, 58 dev_dbg(bdc->dev, 70 dev_dbg(bdc->dev, "command completed successfully\n"); 101 dev_dbg(bdc->dev, "Unknown command completion code:%x\n", ret); 113 dev_dbg(bdc->dev, "%s ep->ep_num =%d cmd_sc=%x\n", __func__, 128 dev_dbg(bdc->dev, "%s ep:%p bd:%p\n", __func__, ep, bd); 150 dev_dbg(bdc->dev, "%s: param0=%08x param1=%08x", 207 dev_dbg(bdc->dev, "cmd_sc=%x param2=%08x\n", cmd_sc, param2); 227 dev_dbg(bdc->dev, "%s: add=%08llx\n", __func__, 235 dev_dbg(bd [all...] |
/linux-master/sound/soc/mediatek/mt8186/ |
H A D | mt8186-afe-gpio.c | 87 dev_dbg(dev, "%s(), pinctrl_lookup_state %s fail, ret %d\n", 110 dev_dbg(dev, "%s(), error, invalid gpio type %d\n", 116 dev_dbg(dev, "%s(), error, gpio type %d not prepared\n", 124 dev_dbg(dev, "%s(), error, can not set gpio type %d\n", 139 dev_dbg(dev, "%s(), MOSI CLK ON select fail!\n", __func__); 145 dev_dbg(dev, "%s(), MOSI DAT ON select fail!\n", __func__); 151 dev_dbg(dev, "%s(), MOSI DAT OFF select fail!\n", __func__); 157 dev_dbg(dev, "%s(), MOSI CLK ON select fail!\n", __func__); 172 dev_dbg(dev, "%s(), MISO CLK ON select fail!\n", __func__); 178 dev_dbg(de [all...] |
/linux-master/drivers/platform/chrome/wilco_ec/ |
H A D | mailbox.c | 133 dev_dbg(ec->dev, "EC does not respond to this command\n"); 139 dev_dbg(ec->dev, "response timed out\n"); 146 dev_dbg(ec->dev, "bad response: 0x%02x\n", flag); 156 dev_dbg(ec->dev, "bad packet checksum 0x%02x\n", rs->checksum); 161 dev_dbg(ec->dev, "EC reported failure: 0x%02x\n", rs->result); 166 dev_dbg(ec->dev, "unexpected packet size (%u != %u)\n", 172 dev_dbg(ec->dev, "EC didn't return enough data (%u < %zu)\n", 201 dev_dbg(ec->dev, "type=%04x flags=%02x rslen=%zu rqlen=%zu\n",
|
/linux-master/drivers/mfd/ |
H A D | da9063-core.c | 126 dev_dbg(da9063->dev, 129 dev_dbg(da9063->dev, 132 dev_dbg(da9063->dev, 135 dev_dbg(da9063->dev, 138 dev_dbg(da9063->dev, 141 dev_dbg(da9063->dev, 144 dev_dbg(da9063->dev, 147 dev_dbg(da9063->dev,
|