Searched refs:printf (Results 126 - 150 of 1028) sorted by relevance

1234567891011>>

/linux-master/tools/testing/selftests/powerpc/math/
H A Dmma.c32 printf("MMA[%d] = %d ", i, z[i]);
35 printf(" (Correct)\n");
37 printf(" (Incorrect)\n");
H A Dvmx_signal.c54 * Shouldn't printf() in a signal handler, however, this is a
59 printf("VMX mismatch at reg %d!\n", i);
60 printf("Reg | Actual | Expected\n");
62 printf("%d | 0x%04x%04x%04x%04x | 0x%04x%04x%04x%04x\n", j, mc->v_regs->vrregs[j][0],
114 printf("\tWaiting for %d workers to start... %d", threads, threads_starting);
118 printf(", %d", threads_starting);
120 printf(" ...done\n");
122 printf("\tSending signals to all threads %d times...", ITERATIONS);
129 printf("done\n");
131 printf("\tKillin
[all...]
/linux-master/tools/perf/trace/beauty/
H A Dmmap_flags.sh20 printf "static const char *mmap_flags[] = {\n"
26 xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
31 xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
37 xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
42 xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
43 printf "};\n"
/linux-master/tools/net/ynl/samples/
H A Dnetdev.c29 printf("%8s", name);
30 printf("[%d]\t", d->ifindex);
35 printf("xdp-features (%llx):", d->xdp_features);
38 printf(" %s", netdev_xdp_act_str(1 << i));
41 printf(" xdp-rx-metadata-features (%llx):", d->xdp_rx_metadata_features);
44 printf(" %s", netdev_xdp_rx_metadata_str(1 << i));
47 printf(" xsk-features (%llx):", d->xsk_features);
50 printf(" %s", netdev_xsk_flags_str(1 << i));
53 printf(" xdp-zc-max-segs=%u", d->xdp_zc_max_segs);
57 printf(" (nt
[all...]
/linux-master/tools/power/cpupower/utils/idle_monitor/
H A Dcpupower-monitor.c49 printf(_("invalid or unknown argument\n"));
70 printf(" ");
103 printf("%s|", buf);
109 printf("||");
112 printf("%s", buf);
114 printf("\n");
117 printf(" PKG|");
119 printf("CORE|");
121 printf(" CPU|");
125 printf("||");
[all...]
/linux-master/tools/leds/
H A Dget_led_device_info.sh12 printf $i"/"; \
80 printf "\n#####################################\n"
81 printf "# LED class device hardware details #\n"
82 printf "#####################################\n\n"
84 printf "bus:\t\t\t$bus\n"
87 printf "idVendor:\t\t$idVendor\n"
91 printf "idProduct:\t\t$idProduct\n"
95 printf "manufacturer:\t\t$manufacturer\n"
99 printf "product:\t\t$product\n"
103 printf "drive
[all...]
/linux-master/samples/hidraw/
H A Dhid-example.c73 printf("Report Descriptor Size: %d\n", desc_size);
81 printf("Report Descriptor:\n");
83 printf("%hhx ", rpt_desc.value[i]);
92 printf("Raw Name: %s\n", buf);
99 printf("Raw Phys: %s\n", buf);
106 printf("Raw Info:\n");
107 printf("\tbustype: %d (%s)\n",
109 printf("\tvendor: 0x%04hx\n", info.vendor);
110 printf("\tproduct: 0x%04hx\n", info.product);
122 printf("ioct
[all...]
/linux-master/samples/bpf/
H A Dxdp_adjust_tail_user.c37 printf("bpf_xdp_query_id failed\n");
43 printf("couldn't find a prog id on a given iface\n");
45 printf("program on interface changed, not removing\n");
64 printf("icmp \"packet too big\" sent: %10llu pkts\n", value);
70 printf("Start a XDP prog which send ICMP \"packet too big\" \n"
72 printf("Usage: %s [...]\n", cmd);
73 printf(" -i <ifname|ifindex> Interface\n");
74 printf(" -T <stop-after-X-seconds> Default: 0 (forever)\n");
75 printf(" -P <MAX_PCKT_SIZE> Default: %u\n", MAX_PCKT_SIZE);
76 printf("
[all...]
H A Dtc_l2_redirect_user.c17 printf("Usage: tc_l2_ipip_redirect [...]\n");
18 printf(" -U <file> Update an already pinned BPF array\n");
19 printf(" -i <ifindex> Interface index\n");
20 printf(" -h Display this help\n");
H A Doffwaketime_user.c28 printf("ksym not found. Is kallsyms loaded?\n");
33 printf("%s/%llx;", sym->name, addr);
35 printf("%s;", sym->name);
53 printf("%s;", key->target);
55 printf("---;");
60 printf("-;");
62 printf("---;");
67 printf(";%s %lld\n", key->waker, count);
70 printf("stackmap collisions seen. Consider increasing size\n");
73 printf("er
[all...]
/linux-master/tools/testing/selftests/ipc/
H A Dmsgque.c42 printf("Failed to open /proc/sys/kernel/msg_next_id\n");
49 printf("Failed to write to /proc/sys/kernel/msg_next_id\n");
55 printf("Failed to create queue\n");
60 printf("Restored queue has wrong id (%d instead of %d)\n",
69 printf("msgsnd failed (%m)\n");
78 printf("Failed to destroy queue: %d\n", -errno);
93 printf("Failed to read IPC message: %m\n");
98 printf("Wrong message size: %d (expected %d)\n", ret,
104 printf("Wrong message type\n");
109 printf("Wron
[all...]
/linux-master/arch/powerpc/xmon/
H A Dnonstdio.h12 #define printf xmon_printf macro
/linux-master/tools/testing/selftests/timers/
H A Dset-tai.c55 printf("tai offset started at %i\n", ret);
57 printf("Checking tai offsets can be properly set: ");
63 printf("[FAILED] expected: %i got %i\n", i, ret);
67 printf("[OK]\n");
/linux-master/tools/power/acpi/tools/ec/
H A Dec_access.c37 printf("Usage:\n");
38 printf("1) %s -r [-s sleep]\n", basename(progname));
39 printf("2) %s -b byte_offset\n", basename(progname));
40 printf("3) %s -w byte_offset -v value\n\n", basename(progname));
73 printf("Bad sleep time: %s\n", optarg);
139 printf(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
142 printf("\n%.2X: ", byte_off);
143 printf(" %.2x ", (uint8_t)buf[byte_off]);
145 printf("\n");
150 printf("\
[all...]
/linux-master/tools/testing/selftests/lib/
H A DMakefile7 TEST_PROGS := printf.sh bitmap.sh prime_numbers.sh scanf.sh strscpy.sh
/linux-master/tools/testing/selftests/x86/
H A Dsingle_step_syscall.c77 printf("[WARN]\tSIGTRAP handler had TF set\n");
84 printf("[WARN]\tHit %d SIGTRAPs with si_addr 0x%lx, ip 0x%lx\n",
102 printf("\tGot %s with RIP=%lx, TF=%ld\n", signames[sig],
116 printf("[FAIL]\tNo SIGTRAP\n");
121 printf("[FAIL]\tTF was cleared\n");
125 printf("[OK]\tSurvived with TF set and %d traps\n", (int)sig_traps);
132 printf("[RUN]\tFast syscall with TF cleared\n");
135 printf("[FAIL]\tTF is now set\n");
139 printf("[FAIL]\tGot SIGTRAP\n");
142 printf("[O
[all...]
H A Dsyscall_arg_fault.c51 printf("[FAIL]\tAX had the wrong value: 0x%lx\n",
53 printf("\tIP = 0x%lx\n", (unsigned long)ctx->uc_mcontext.gregs[REG_IP]);
56 printf("[OK]\tSeems okay\n");
79 printf("[WARN]\tGot stuck single-stepping -- you probably have a KVM bug\n");
94 printf("[OK]\tSYSCALL returned normally\n");
96 printf("[SKIP]\tIllegal instruction\n");
139 printf("[RUN]\tSYSENTER with invalid state\n");
154 printf("[RUN]\tSYSCALL with invalid state\n");
170 printf("[RUN]\tSYSENTER with TF and invalid state\n");
190 printf("[RU
[all...]
/linux-master/tools/testing/selftests/bpf/
H A Dtest_cgroup_storage.c50 printf("Not enough memory for per-cpu area (%d cpus)\n", nproc);
60 printf("Failed to create map: %s\n", strerror(errno));
67 printf("Failed to create map: %s\n", strerror(errno));
77 printf("Failed to load bpf program: %s\n", bpf_log_buf);
85 printf("Failed to attach bpf program\n");
90 printf("Failed to get the first key in cgroup storage\n");
95 printf("Failed to lookup cgroup storage 0\n");
103 printf("Failed to update the data in the cgroup storage\n");
114 printf("Failed to lookup cgroup storage\n");
119 printf("Unexpecte
[all...]
/linux-master/tools/testing/selftests/vDSO/
H A Dvdso_test_gettimeofday.c42 printf("AT_SYSINFO_EHDR is not present!\n");
53 printf("Could not find %s\n", name);
61 printf("The time is %lld.%06lld\n",
64 printf("%s failed\n", name);
H A Dvdso_test_getcpu.c37 printf("AT_SYSINFO_EHDR is not present!\n");
45 printf("Could not find %s\n", name);
51 printf("Running on CPU %u node %u\n", cpu, node);
53 printf("%s failed\n", name);
/linux-master/arch/x86/boot/
H A Dcpu.c51 printf("%s ", msg_strs+2);
53 printf("%d:%d ", i, j);
68 printf("This kernel requires an %s CPU, ",
70 printf("but only detected an %s CPU.\n",
/linux-master/tools/power/cpupower/utils/
H A Dcpuidle-set.c53 printf(_("Bad value: %s, Integer expected\n"), optarg);
68 printf(_("Bad latency value: %s\n"), optarg);
88 printf(_("You can't specify more than one "
92 printf(_("invalid or unknown argument\n"));
119 printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu);
121 printf(_("Idlestate %u not available on CPU %u\n"),
124 printf(_("Idlestate disabling not supported by kernel\n"));
126 printf(_("Idlestate %u not disabled on CPU %u\n"),
132 printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu);
134 printf(
[all...]
/linux-master/tools/testing/selftests/riscv/vector/
H A Dv_initval_nolibc.c13 printf("\n");
15 printf(" ");
17 printf("%02x ", ptr[i]);
19 printf("\n");
/linux-master/lib/
H A Dgen_crc32table.c98 printf("{");
101 printf("\n");
102 printf("%s(0x%8.8xL), ", trans, table[j][i]);
104 printf("%s(0x%8.8xL)},\n", trans, table[j][len - 1]);
110 printf("/* this file is generated - do not edit */\n\n");
114 printf("static const u32 ____cacheline_aligned "
119 printf("};\n");
124 printf("static const u32 ____cacheline_aligned "
129 printf("};\n");
133 printf("stati
[all...]
/linux-master/tools/laptop/dslm/
H A Ddslm.c44 D(printf(" drive state is: %d\n", state));
81 printf("Starting measurements\n");
85 printf(" System is in state %s\n\n", state_name(last_state));
103 printf("%s: State-change to %s\n", myctime(curr_time),
110 printf("\nTotal running time: %lus\n", curr_time - start_time);
111 printf(" State changed %d times\n", changes);
114 printf(" Time in sleep state: %lus (%.2f%%)\n", sleep_time, tmp);
116 printf(" Time in active state: %lus (%.2f%%)\n", active_time, tmp);
118 printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
148 printf("Ca
[all...]

Completed in 306 milliseconds

1234567891011>>