x86/cpu: Remove X86_FEATURE_NAMES

While discussing to change the visibility of X86_FEATURE_NAMES (see Link)
in order to remove CONFIG_EMBEDDED, Boris suggested to simply make the
X86_FEATURE_NAMES functionality unconditional.

As the need for really tiny kernel images has gone away and kernel images
with !X86_FEATURE_NAMES are hardly tested, remove this config and the whole
ifdeffery in the source code.

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20230509084007.24373-1-lukas.bulwahn@gmail.com/
Link: https://lore.kernel.org/r/20230510065713.10996-3-lukas.bulwahn@gmail.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497

Based on 1 normalized pattern(s):

this file is part of the linux kernel and is made available under
the terms of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 28 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.534229504@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86/boot: Fail the boot if !M486 and CPUID is missing"

This reverts commit ed68d7e9b9cfb64f3045ffbcb108df03c09a0f98.

The patch wasn't quite correct -- there are non-Intel (and hence
non-486) CPUs that we support that don't have CPUID. Since we no
longer require CPUID for sync_core(), just revert the patch.

I think the relevant CPUs are Geode and Elan, but I'm not sure.

In principle, we should try to do better at identifying CPUID-less
CPUs in early boot, but that's more complicated.

Reported-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel <Xen-devel@lists.xen.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/82acde18a108b8e353180dd6febcc2876df33f24.1481307769.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86/boot: Fail the boot if !M486 and CPUID is missing

Linux will have all kinds of sporadic problems on systems that don't
have the CPUID instruction unless CONFIG_M486=y. In particular,
sync_core() will explode.

I believe that these kernels had a better chance of working before
commit 05fb3c199bb0 ("x86/boot: Initialize FPU and X86_FEATURE_ALWAYS
even if we don't have CPUID"). That commit inadvertently fixed a
serious bug: we used to fail to detect the FPU if CPUID wasn't
present. Because we also used to forget to set X86_FEATURE_ALWAYS, we
end up with no cpu feature bits set at all. This meant that
alternative patching didn't do anything and, if paravirt was disabled,
we could plausibly finish the entire boot process without calling
sync_core().

Rather than trying to work around these issues, just have the kernel
fail loudly if it's running on a CPUID-less 486, doesn't have CPUID,
and doesn't have CONFIG_M486 set.

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/70eac6639f23df8be5fe03fa1984aedd5d40077a.1479598603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/mm: Disallow running with 32-bit PTEs to work around erratum

The Intel(R) Xeon Phi(TM) Processor x200 Family (codename: Knights
Landing) has an erratum where a processor thread setting the Accessed
or Dirty bits may not do so atomically against its checks for the
Present bit. This may cause a thread (which is about to page fault)
to set A and/or D, even though the Present bit had already been
atomically cleared.

These bits are truly "stray". In the case of the Dirty bit, the
thread associated with the stray set was *not* allowed to write to
the page. This means that we do not have to launder the bit(s); we
can simply ignore them.

If the PTE is used for storing a swap index or a NUMA migration index,
the A bit could be misinterpreted as part of the swap type. The stray
bits being set cause a software-cleared PTE to be interpreted as a
swap entry. In some cases (like when the swap index ends up being
for a non-existent swapfile), the kernel detects the stray value
and WARN()s about it, but there is no guarantee that the kernel can
always detect it.

When we have 64-bit PTEs (64-bit mode or 32-bit PAE), we were able
to move the swap PTE format around to avoid these troublesome bits.
But, 32-bit non-PAE is tight on bits. So, disallow it from running
on this hardware. I can't imagine anyone wanting to run 32-bit
non-highmem kernels on this hardware, but disallowing them from
running entirely is surely the safe thing to do.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: dave.hansen@intel.com
Cc: linux-mm@kvack.org
Cc: mhocko@suse.com
Link: http://lkml.kernel.org/r/20160708001914.D0B50110@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86: Support compiling out human-friendly processor feature names

The table mapping CPUID bits to human-readable strings takes up a
non-trivial amount of space, and only exists to support /proc/cpuinfo
and a couple of kernel messages. Since programs depend on the format of
/proc/cpuinfo, force inclusion of the table when building with /proc
support; otherwise, support omitting that table to save space, in which
case the kernel messages will print features numerically instead.

In addition to saving 1408 bytes out of vmlinux, this also saves 1373
bytes out of the uncompressed setup code, which contributes directly to
the size of bzImage.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>

x86 setup: handle more than 8 CPU flag words

Checkin e38e05a85828dac23540cd007df5f20985388afc added a 9th CPU flag
word, but didn't adjust the boot code to match. This patch adds the
necessary boot code support.

Note: due to a typo in an #if statement, it didn't trigger the #error
this was supposed to do.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

x86: cleanup for setup code crashes during IST probe

Clean up the code for crashes during SpeedStep probing on older
machines.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Fix up silly i1586 boot message.

Trying to boot a 64-bit kernel on a 32bit Pentium 4 gets
you an amusing message along the lines of.
"you need an x86-64, but you only have an i1586"
due to the P4 being family F. Munge it to be 686.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

x86 setup: print missing CPU features in cleartext

Instead of obscure numbers, print the list of missing CPU features in
cleartext. To conserve space, use a host program (mkcpustr.c) to
produce a compact list of mandatory features only.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

i386: move boot

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>