Searched refs:both (Results 26 - 49 of 49) sorted by relevance

12

/asus-wl-520gu-7.0.1.45/src/linux/linux/arch/sparc/lib/
H A Drem.S133 ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
H A Dsdiv.S132 ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
/asus-wl-520gu-7.0.1.45/src/linux/linux/arch/alpha/lib/
H A Dev6-stxncpy.S389 or t0, t1, t0 # E : and put it there (stall both t0, t1)
/asus-wl-520gu-7.0.1.45/src/linux/linux/arch/m68k/ifpsp060/
H A Dos.S32 | - example "Call-Out"s required by both the ISP and FPSP.
/asus-wl-520gu-7.0.1.45/src/cfe/cfe/arch/mips/cpu/sb1250/src/
H A Dsb1250_l2cache.S461 # Set the BERR bits in both memory controllers. We're
/asus-wl-520gu-7.0.1.45/src/router/iproute2/doc/
H A Dip-tunnels.tex81 A: Linux-2.2 has single module \verb|ipip| for both directions of tunneling
399 to resolve both IP and IPv6 addresses via ARP/NDISC, so that
H A Dapi-ip6-flowlabels.tex100 It contradicts both to IETF spirit and the letter. Before RFC2553
H A Dip-cref.tex2406 The \verb|key| parameter sets the key to use in both directions.
2556 classification both by source and destination becomes quite manageable.
2908 network. A more advanced script, which may be used both on multihomed
3085 I strongly recommend using it {\em instead\/} of \verb|ifconfig| both
/asus-wl-520gu-7.0.1.45/src/linux/linux/arch/m68k/fpsp040/
H A Dssin.S5 | sCOS computes the cosine, and sSINCOS computes both. The
16 | Modifies: Fp0 for SIN or COS; both Fp0 and Fp1 for SINCOS.
H A Dsetox.S27 | Two timings are measured, both in the copy-back mode. The
670 |--a0 points to 2^(J/64), D0 and a1 both contain M
H A Dbugfix.S349 | Check for opclass 2 and single size. If not both, exit.
H A Dround.S285 | Note that both routines have been optimized (for the worst case) and
/asus-wl-520gu-7.0.1.45/src/linux/linux/Documentation/cdrom/
H A Dcdrom-standard.tex65 both IDE/ATAPI and SCSI, now use this Uniform interface.
698 control both the hardware and software of their supported products,
745 We hope that these option can convince everybody (both driver
893 are treated by an independent queue, so both mechanisms will detect
924 both audio and data tracks, it will return $CDS_MIXED$. If there
1010 \item Try to recompile the drivers. We advise you to use modules, both
/asus-wl-520gu-7.0.1.45/src/linux/linux/arch/m68k/ifpsp060/src/
H A Dilsp.S416 tst.b DDSECOND(%a6) # both q words done?
603 # one or both of the operands is zero so the result is also zero.
740 # one or both of the operands is zero so the result is also zero.
H A Disp.S373 # and "chk2" can cause a "Chk" exception. In both cases, the current #
1929 # reading a longword. sign extend both. if it's a data operation,
1953 # reading a word. sign extend both. if it's a data operation,
2366 tst.b DDSECOND(%a6) # both q words done?
2650 # one or both of the operands is zero so the result is also zero.
3212 # (10)Do the compares. If both equal, go to step (13). #
H A Dpfpsp.S966 # funfl_{unfl,inex}_on() because w/ both exceptions disabled, this
1265 # we don't know whether the src operand or the dst operand (or both) is the
4301 # for predecrement mode, the bit string is the opposite of both control
5703 # If either operand (but not both operands) of an operation is a #
5704 # nonsignalling NAN, then that NAN is returned as the result. If both #
6497 # zero; both the exponent and mantissa are changed. #
8049 # - scale the result exponent using the scale factor. if both operands were
8327 # Multiply: inputs are not both normalized; what are they?
9095 # Divide: inputs are not both normalized; what are they?
9186 mov.b SRC_EX(%a0),%d0 # load both sign
[all...]
H A Dfpsp.S967 # funfl_{unfl,inex}_on() because w/ both exceptions disabled, this
1266 # we don't know whether the src operand or the dst operand (or both) is the
7411 #--a0 points to 2^(J/64), D0 and a1 both contain M
11618 # - scale the result exponent using the scale factor. if both operands were
11896 # Multiply: inputs are not both normalized; what are they?
12664 # Divide: inputs are not both normalized; what are they?
12755 mov.b SRC_EX(%a0),%d0 # load both signs
12775 mov.b DST_EX(%a1),%d0 # load both signs
13779 # fcmp: inputs are not both normalized; what are they?
14191 # Single Precision Multiply: inputs are not both normalize
[all...]
H A Dfplsp.S7305 #--a0 points to 2^(J/64), D0 and a1 both contain M
10894 # zero; both the exponent and mantissa are changed. #
/asus-wl-520gu-7.0.1.45/src/router/samba/packaging/Mandrake/
H A Dsamba2.spec3 # Keep in mind that any changes should take both locations into account
413 Summary: Files used by both Samba servers and clients.
425 Samba-common provides files necessary for both the server and client
447 Samba-doc provides documentation files for both the server and client
1094 # Link both smbldap*.pm into vendor-perl (any better ideas?)
2018 - /lib/* was in both samba and samba-common
/asus-wl-520gu-7.0.1.45/src/linux/linux/drivers/media/video/
H A Dstradis.c202 /* set both to write both bytes, reset it to write only b1 */
205 unsigned char b2, int both)
219 if (both)
204 I2CWrite(struct i2c_bus *bus, unsigned char addr, unsigned char b1, unsigned char b2, int both) argument
/asus-wl-520gu-7.0.1.45/src/router/library/libiconv-1.8/libcharset/
H A Dconfigure799 --with-pic try to use only PIC/non-PIC objects default=use both
1564 # If both `conftest.exe' and `conftest' are `present' (well, observable)
1738 # for both compiling C and C++ we need to have the C++ compiler decide
1933 # Passes both tests.
2024 # Passes both tests.
2615 # Let's accept both of them until this is cleared up.
3506 # The problem is because libdl dynamically linked with both libc and
3687 # On HP-UX, both CC and GCC only warn that PIC is supported... then
/asus-wl-520gu-7.0.1.45/src/router/library/libiconv-1.8/
H A Dconfigure805 --with-pic try to use only PIC/non-PIC objects default=use both
1599 # If both `conftest.exe' and `conftest' are `present' (well, observable)
1773 # for both compiling C and C++ we need to have the C++ compiler decide
1968 # Passes both tests.
2059 # Passes both tests.
2768 # Let's accept both of them until this is cleared up.
3659 # The problem is because libdl dynamically linked with both libc and
3840 # On HP-UX, both CC and GCC only warn that PIC is supported... then
10085 # CATALOGS depends on both $ac_dir and the user's LINGUAS
/asus-wl-520gu-7.0.1.45/src/router/LPRng/
H A Dconfigure1036 --with-pic try to use only PIC/non-PIC objects default=use both
2953 # If both `conftest.exe' and `conftest' are `present' (well, observable)
3145 # for both compiling C and C++ we need to have the C++ compiler decide
3352 # Passes both tests.
3443 # Passes both tests.
3917 # for both compiling C and C++ we need to have the C++ compiler decide
4851 # Let's accept both of them until this is cleared up.
5854 # The problem is because libdl dynamically linked with both libc and
6024 # On HP-UX, both CC and GCC only warn that PIC is supported... then
9650 echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both b
[all...]
/asus-wl-520gu-7.0.1.45/src/router/libusb/
H A Dconfigure1045 both]
2660 # If both `conftest.exe' and `conftest' are `present' (well, observable)
2986 # for both compiling C and C++ we need to have the C++ compiler decide
3153 # both Tru64's cc and ICC support -MD to output dependencies as a
3545 # Let's accept both of them until this is cleared up.
3983 # Passes both tests.
4090 # Passes both tests.
4879 # both Tru64's cc and ICC support -MD to output dependencies as a
5061 # Passes both tests.
5168 # Passes both test
[all...]

Completed in 435 milliseconds

12