Searched hist:331506 (Results 1 - 25 of 28) sorted by relevance
/freebsd-11-stable/sys/dev/xilinx/ | ||
H A D | axi_quad_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/modules/spi/spibus/ | ||
H A D | Makefile | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/modules/spi/at45d/ | ||
H A D | Makefile | 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/modules/spi/mx25l/ | ||
H A D | Makefile | 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/modules/spi/ | ||
H A D | Makefile | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/mips/rt305x/ | ||
H A D | rt305x_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/arm/freescale/vybrid/ | ||
H A D | vf_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/mips/mediatek/ | ||
H A D | mtk_spi_v1.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | mtk_spi_v2.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/arm/samsung/exynos/ | ||
H A D | exynos5_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/modules/imx/ | ||
H A D | Makefile | 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/arm/ti/ | ||
H A D | ti_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/arm/lpc/ | ||
H A D | lpc_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/arm/freescale/imx/ | ||
H A D | imx_ccmvar.h | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | imx_spi.c | 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | imx6_ccm.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | imx6_ccmreg.h | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | imx51_ccm.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | files.imx5 | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | files.imx6 | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/mips/atheros/ | ||
H A D | ar71xx_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/dev/spibus/ | ||
H A D | ofw_spibus.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
H A D | spibusvar.h | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/arm/broadcom/bcm2835/ | ||
H A D | bcm2835_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
/freebsd-11-stable/sys/arm/at91/ | ||
H A D | at91_spi.c | diff 331506 Sat Mar 24 23:27:24 MDT 2018 ian MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620, r329729, r329911, r329999 r310017: [spi] reformat message This commit corrects print of nomatch (newline was too early) Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: ray, loos, mizhka Differential Revision: https://reviews.freebsd.org/D8749 r310229: ofw_spi: Parse property for the SPI mode and CS polarity. As cs is stored in a uint32_t, use the last bit to store the active high flag as it's unlikely that we will have that much CS. Reviewed by: loos Differential Revision: https://reviews.freebsd.org/D8614 r312289: [spibus] small code refactoring Merge 3 sequential printf calls into one. Reported by: rpokala Reviewed by: rpokala, adrian Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8795 r327260: SPDX: fix wrong license ID tag in dev/spibus. r329539: Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass so other drivers can refer to them in DRIVER_MODULE() decls. r329544: Add modules/spi as a gathering point for SPI-related modules, analagous to modules/i2c for i2c/iicbus modules. Build spibus as a module. r329545: Add ofw_bus_if.h to SRCS. r329546: Build at45d and mx25l SPI flash drivers as modules. r329620: Add missing MODULE_DEPENDS(). r329729: Remove some files that snuck in via cut and paste. Having these compiled into the module causes the kobj method descriptors to be resolved incorrectly (by the compile-time linker instead of the kernel linker), which then leads to hours of frustrating debugging. r329911: Add a functional detach() routine, to make things kldunload-friendly. r329999: Add a SPI driver for imx5 and imx6. It can be compiled into the kernel with "device imx_spi" or loaded as a module, which is also named "imx_spi". |
Completed in 400 milliseconds