Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

power: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

power: zynqmp: Mask node already configured error

Do not return an error (ENODEV) from the request function if the node is
already configured.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20230523124215.30915-3-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

firmware: zynqmp: Skip loading config object for Versal

SET_CONFIGURATION is not yet implemented for Versal platforms. Skip
loading config object for Versal until support is added.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/eb7ef6c6de36a1f7d056de43042f96fe3639f18e.1659691195.git.michal.simek@amd.com

power: zynqmp: Use zynqmp_pmufw_node() from firmware

Remove private xpm_configobject[] and use zynqmp_pmufw_node() which
provides the same functionality.
Also add debug messages for easier debugging.

Fixes: e0283cbdfd49 ("power: zynqmp: Add power domain driver for ZynqMP")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/bddf11459b9b9e849fac9a50db2f1a5fdfae4119.1646122254.git.michal.simek@xilinx.com

power: zynqmp: Add power domain driver for ZynqMP

Driver should be enabled by CONFIG_POWER_DOMAIN=y and
CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node
but it uses zynqmp firmware DT node that's why there is a need to bind
driver when firmware node is found.

Driver itself is simple. It is sending pmufw config object overlay for
enabling access to device which is done in ...domain_request().
In ...domain_on() capabilities are passed and node is requested.
This should be bare minimum of required to get power domain driver working.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com

power: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

power: zynqmp: Mask node already configured error

Do not return an error (ENODEV) from the request function if the node is
already configured.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20230523124215.30915-3-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

firmware: zynqmp: Skip loading config object for Versal

SET_CONFIGURATION is not yet implemented for Versal platforms. Skip
loading config object for Versal until support is added.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/eb7ef6c6de36a1f7d056de43042f96fe3639f18e.1659691195.git.michal.simek@amd.com

power: zynqmp: Use zynqmp_pmufw_node() from firmware

Remove private xpm_configobject[] and use zynqmp_pmufw_node() which
provides the same functionality.
Also add debug messages for easier debugging.

Fixes: e0283cbdfd49 ("power: zynqmp: Add power domain driver for ZynqMP")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/bddf11459b9b9e849fac9a50db2f1a5fdfae4119.1646122254.git.michal.simek@xilinx.com

power: zynqmp: Add power domain driver for ZynqMP

Driver should be enabled by CONFIG_POWER_DOMAIN=y and
CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node
but it uses zynqmp firmware DT node that's why there is a need to bind
driver when firmware node is found.

Driver itself is simple. It is sending pmufw config object overlay for
enabling access to device which is done in ...domain_request().
In ...domain_on() capabilities are passed and node is requested.
This should be bare minimum of required to get power domain driver working.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com

power: zynqmp: Mask node already configured error

Do not return an error (ENODEV) from the request function if the node is
already configured.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20230523124215.30915-3-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

firmware: zynqmp: Skip loading config object for Versal

SET_CONFIGURATION is not yet implemented for Versal platforms. Skip
loading config object for Versal until support is added.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/eb7ef6c6de36a1f7d056de43042f96fe3639f18e.1659691195.git.michal.simek@amd.com

power: zynqmp: Use zynqmp_pmufw_node() from firmware

Remove private xpm_configobject[] and use zynqmp_pmufw_node() which
provides the same functionality.
Also add debug messages for easier debugging.

Fixes: e0283cbdfd49 ("power: zynqmp: Add power domain driver for ZynqMP")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/bddf11459b9b9e849fac9a50db2f1a5fdfae4119.1646122254.git.michal.simek@xilinx.com

power: zynqmp: Add power domain driver for ZynqMP

Driver should be enabled by CONFIG_POWER_DOMAIN=y and
CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node
but it uses zynqmp firmware DT node that's why there is a need to bind
driver when firmware node is found.

Driver itself is simple. It is sending pmufw config object overlay for
enabling access to device which is done in ...domain_request().
In ...domain_on() capabilities are passed and node is requested.
This should be bare minimum of required to get power domain driver working.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com

firmware: zynqmp: Skip loading config object for Versal

SET_CONFIGURATION is not yet implemented for Versal platforms. Skip
loading config object for Versal until support is added.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/eb7ef6c6de36a1f7d056de43042f96fe3639f18e.1659691195.git.michal.simek@amd.com

power: zynqmp: Use zynqmp_pmufw_node() from firmware

Remove private xpm_configobject[] and use zynqmp_pmufw_node() which
provides the same functionality.
Also add debug messages for easier debugging.

Fixes: e0283cbdfd49 ("power: zynqmp: Add power domain driver for ZynqMP")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/bddf11459b9b9e849fac9a50db2f1a5fdfae4119.1646122254.git.michal.simek@xilinx.com

power: zynqmp: Add power domain driver for ZynqMP

Driver should be enabled by CONFIG_POWER_DOMAIN=y and
CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node
but it uses zynqmp firmware DT node that's why there is a need to bind
driver when firmware node is found.

Driver itself is simple. It is sending pmufw config object overlay for
enabling access to device which is done in ...domain_request().
In ...domain_on() capabilities are passed and node is requested.
This should be bare minimum of required to get power domain driver working.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com

power: zynqmp: Use zynqmp_pmufw_node() from firmware

Remove private xpm_configobject[] and use zynqmp_pmufw_node() which
provides the same functionality.
Also add debug messages for easier debugging.

Fixes: e0283cbdfd49 ("power: zynqmp: Add power domain driver for ZynqMP")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/bddf11459b9b9e849fac9a50db2f1a5fdfae4119.1646122254.git.michal.simek@xilinx.com

power: zynqmp: Add power domain driver for ZynqMP

Driver should be enabled by CONFIG_POWER_DOMAIN=y and
CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node
but it uses zynqmp firmware DT node that's why there is a need to bind
driver when firmware node is found.

Driver itself is simple. It is sending pmufw config object overlay for
enabling access to device which is done in ...domain_request().
In ...domain_on() capabilities are passed and node is requested.
This should be bare minimum of required to get power domain driver working.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com

power: zynqmp: Add power domain driver for ZynqMP

Driver should be enabled by CONFIG_POWER_DOMAIN=y and
CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node
but it uses zynqmp firmware DT node that's why there is a need to bind
driver when firmware node is found.

Driver itself is simple. It is sending pmufw config object overlay for
enabling access to device which is done in ...domain_request().
In ...domain_on() capabilities are passed and node is requested.
This should be bare minimum of required to get power domain driver working.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com