#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
b8d59ba0 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: freescale: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Jason Liu <jason.hui.liu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49acd56e |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move testdram() into init.h This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
aa0d99fc |
|
26-Mar-2012 |
Alison Wang <b18965@freescale.com> |
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x Signed-off-by: Alison Wang <b18965@freescale.com> |
#
6d0f6bcf |
|
16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
#
9973e3c6 |
|
09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
#
1ac559d4 |
|
14-Jan-2008 |
TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
ColdFire: Add M5373EVB platform support - 1 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com> |
#
b8d59ba0 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: freescale: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Jason Liu <jason.hui.liu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49acd56e |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move testdram() into init.h This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
aa0d99fc |
|
26-Mar-2012 |
Alison Wang <b18965@freescale.com> |
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x Signed-off-by: Alison Wang <b18965@freescale.com> |
#
6d0f6bcf |
|
16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
#
9973e3c6 |
|
09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
#
1ac559d4 |
|
14-Jan-2008 |
TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
ColdFire: Add M5373EVB platform support - 1 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com> |
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49acd56e |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move testdram() into init.h This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
aa0d99fc |
|
26-Mar-2012 |
Alison Wang <b18965@freescale.com> |
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x Signed-off-by: Alison Wang <b18965@freescale.com> |
#
6d0f6bcf |
|
16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
#
9973e3c6 |
|
09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
#
1ac559d4 |
|
14-Jan-2008 |
TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
ColdFire: Add M5373EVB platform support - 1 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49acd56e |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move testdram() into init.h This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
aa0d99fc |
|
26-Mar-2012 |
Alison Wang <b18965@freescale.com> |
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x Signed-off-by: Alison Wang <b18965@freescale.com> |
#
6d0f6bcf |
|
16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
#
9973e3c6 |
|
09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
#
1ac559d4 |
|
14-Jan-2008 |
TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
ColdFire: Add M5373EVB platform support - 1 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49acd56e |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move testdram() into init.h This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
aa0d99fc |
|
26-Mar-2012 |
Alison Wang <b18965@freescale.com> |
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x Signed-off-by: Alison Wang <b18965@freescale.com> |
#
6d0f6bcf |
|
16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
#
9973e3c6 |
|
09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
#
1ac559d4 |
|
14-Jan-2008 |
TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
ColdFire: Add M5373EVB platform support - 1 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com> |
#
49acd56e |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move testdram() into init.h This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
aa0d99fc |
|
26-Mar-2012 |
Alison Wang <b18965@freescale.com> |
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x Signed-off-by: Alison Wang <b18965@freescale.com> |
#
6d0f6bcf |
|
16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
#
9973e3c6 |
|
09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
#
1ac559d4 |
|
14-Jan-2008 |
TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
ColdFire: Add M5373EVB platform support - 1 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
|
#
aa0d99fc |
|
26-Mar-2012 |
Alison Wang <b18965@freescale.com> |
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x Signed-off-by: Alison Wang <b18965@freescale.com>
|
#
6d0f6bcf |
|
16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
#
9973e3c6 |
|
09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
|
#
1ac559d4 |
|
14-Jan-2008 |
TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
ColdFire: Add M5373EVB platform support - 1 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com>
|