gpio: Add QUICC Engine GPIOs driver

The mpc832x has GPIOs handled by the QUICC Engine.
The registers are different from the one for the
non QE mpc83xx GPIOs.

Implement a GPIO driver for those.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

powerpc: remove support for kmtergr1 and MPC8309

The kmtegr1 board is out of maintenance and can be removed. As it is the
only board in the tree using MPC8309 the support for this CPU is dropped
completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>

ppc: Remove MPC8315ERDB board

This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM. Remove it. As this is the last
ARCH_MPC8315 platform, remove that support as well.

Signed-off-by: Tom Rini <trini@konsulko.com>

mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309

The MPC8309 has two gpio controllers (which is already correctly
reflected in its struct immap definition).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Prepare usage of DM gpio driver

The MPC85xx GPIO driver was converted to handle a broader range of SoCs.

Prepare the MPC83xx code for usage of this driver.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC837X

Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC834*

Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC831*

Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC830*

Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

mpc83xx: Add a GPIO driver for the MPC83XX family

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

powerpc: remove support for kmtergr1 and MPC8309

The kmtegr1 board is out of maintenance and can be removed. As it is the
only board in the tree using MPC8309 the support for this CPU is dropped
completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>

ppc: Remove MPC8315ERDB board

This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM. Remove it. As this is the last
ARCH_MPC8315 platform, remove that support as well.

Signed-off-by: Tom Rini <trini@konsulko.com>

mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309

The MPC8309 has two gpio controllers (which is already correctly
reflected in its struct immap definition).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Prepare usage of DM gpio driver

The MPC85xx GPIO driver was converted to handle a broader range of SoCs.

Prepare the MPC83xx code for usage of this driver.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC837X

Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC834*

Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC831*

Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC830*

Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

mpc83xx: Add a GPIO driver for the MPC83XX family

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

ppc: Remove MPC8315ERDB board

This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM. Remove it. As this is the last
ARCH_MPC8315 platform, remove that support as well.

Signed-off-by: Tom Rini <trini@konsulko.com>

mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309

The MPC8309 has two gpio controllers (which is already correctly
reflected in its struct immap definition).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Prepare usage of DM gpio driver

The MPC85xx GPIO driver was converted to handle a broader range of SoCs.

Prepare the MPC83xx code for usage of this driver.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC837X

Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC834*

Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC831*

Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC830*

Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

mpc83xx: Add a GPIO driver for the MPC83XX family

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309

The MPC8309 has two gpio controllers (which is already correctly
reflected in its struct immap definition).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Prepare usage of DM gpio driver

The MPC85xx GPIO driver was converted to handle a broader range of SoCs.

Prepare the MPC83xx code for usage of this driver.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC837X

Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC834*

Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC831*

Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC830*

Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

mpc83xx: Add a GPIO driver for the MPC83XX family

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

mpc83xx: Prepare usage of DM gpio driver

The MPC85xx GPIO driver was converted to handle a broader range of SoCs.

Prepare the MPC83xx code for usage of this driver.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC837X

Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC834*

Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC831*

Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

mpc83xx: Introduce ARCH_MPC830*

Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

mpc83xx: Add a GPIO driver for the MPC83XX family

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

mpc83xx: Add a GPIO driver for the MPC83XX family

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>