Fix "stray level 1 interrupt" panic by pressing keys during autoconf(9).

Also explicitly initialize sc->sc_status = HIL_STATUS_BUSY in hil_attach().

Previously hil_intr(9) returned immediately during 'cold', but
all interrupts are enabled at the end of configure() (actually
in MD cpu_configure()) and cold is cleared in confiugre2()
after configure(), so there is a small window when hil interrupts
can be triggered during cold.

It looks there is no problem to process hil_intr() before
hil_attach_deferre() is called via configure2() because
we already check 'sc->sc_status != HIL_STATUS_BUSY' on
processing a kthread.

Note this seems also to appease the similar panic on mame's hp9k370
emulation (though mame's emulation around DMAC looks still incomplete).

Should be pulled up to netbsd-10 and netbsd-9.

Add rnd(9) entropy source from hil(4) devices.

s/occured/occurred/ in comments, log messages and man pages.

Merge thorpej-cfargs2.

branches: 1.4.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.3.14;
Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER! Some subsystems have

#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.60; 1.2.62;
- make local functions static
- use aprint_normal(9) and variants
- misc KNF

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
and I can't confirm that 362 and 382 actually have SGC bus.
(I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
once after keycode with NoSymbol problem is addressed.
(We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

Add rnd(9) entropy source from hil(4) devices.

s/occured/occurred/ in comments, log messages and man pages.

Merge thorpej-cfargs2.

branches: 1.4.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.3.14;
Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER! Some subsystems have

#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.60; 1.2.62;
- make local functions static
- use aprint_normal(9) and variants
- misc KNF

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
and I can't confirm that 362 and 382 actually have SGC bus.
(I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
once after keycode with NoSymbol problem is addressed.
(We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

s/occured/occurred/ in comments, log messages and man pages.

Merge thorpej-cfargs2.

branches: 1.4.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.3.14;
Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER! Some subsystems have

#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.60; 1.2.62;
- make local functions static
- use aprint_normal(9) and variants
- misc KNF

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
and I can't confirm that 362 and 382 actually have SGC bus.
(I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
once after keycode with NoSymbol problem is addressed.
(We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

Merge thorpej-cfargs2.

branches: 1.4.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.3.14;
Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER! Some subsystems have

#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.60; 1.2.62;
- make local functions static
- use aprint_normal(9) and variants
- misc KNF

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
and I can't confirm that 362 and 382 actually have SGC bus.
(I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
once after keycode with NoSymbol problem is addressed.
(We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.3.14;
Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER! Some subsystems have

#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.60; 1.2.62;
- make local functions static
- use aprint_normal(9) and variants
- misc KNF

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
and I can't confirm that 362 and 382 actually have SGC bus.
(I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
once after keycode with NoSymbol problem is addressed.
(We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER! Some subsystems have

#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.60;
- make local functions static
- use aprint_normal(9) and variants
- misc KNF

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
and I can't confirm that 362 and 382 actually have SGC bus.
(I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
once after keycode with NoSymbol problem is addressed.
(We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.