Remove unnecessary <sys/malloc.h>.

Merge thorpej-cfargs2.

branches: 1.24.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.23.4;
Overhaul the interface to pci_configure_bus():
- Don't expose how PCI bus configuration resource management is implemented.
Provide a new resource provider API:

==> pciconf_resource_init() -- Initialize a PCI configuration resources
container.
==> pciconf_resource_add() -- Add a PCI configuration resource to the
container (I/O, MEM, or prefetchable MEM). Multiple resources of
each type may be added.
==> pciconf_resource_fini() -- Tear down the PCI configurtation resources
container once the bus has been configured.

This is much easier to use than the previous method of providing an
extent map for each kind of resource, and works better for e.g. ACPI
platforms that provide potentially multiple PCI resources in tables
provided by firmware.

- Re-implement PCI configuration resource management using vmem arenas,
rather than extent maps.

replace EX_NOWAIT with EX_WAITOK in device attach methods.
remove checks for failures that can no longer occur.

simplify macepci_intr():
- use uint32_t
- always clear all error bits
- avoid a compiler bug(?) which caused the test for MACE_PERR_MASTER_ABORT
to fail on n32
now my O2 no longer hangs when leaving cold

branches: 1.20.2;
PCI Extended Configuration stuff written by nonaka@:
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific

on mips64 we can use the whole PCI space, not just the two 32MB windows
accessible via KSEG*

switch sgimips to common bus_dma and bus_space in arch/mips/
Tested on O2 and Indy.
Things that are compile-tested only for lack of hardware:
- GIO ethernet cards with PCI bridges
- IP2x hardware not found on Indy
- IP1x

branches: 1.17.6;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

kill sprintf.

branches: 1.15.2;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.14.6;
converting extent(9) from malloc(9) to kmem(9)
preceding kmem-vmem-pool-uvm patch

releng@ acknowledged

branches: 1.13.2; 1.13.6;
#include <sys/bus.h> instead of <machine/bus.h>.

PCI_FLAGS_IO_ENABLED and PCI_FLAGS_MEM_ENABLED changed their functional
role in NetBSD (drivers are no longer supposed to write these to
pa_flags) without changing name. Correct that.

Rename PCI_FLAGS_IO_ENABLED to PCI_FLAGS_IO_OKAY and
PCI_FLAGS_MEM_ENABLED to PCI_FLAGS_MEM_OKAY, thus making their names
consistent with the other PCI flags and poisoning 3rd-party driver
sources that use the flags in the old bad way.

This patch produces no binary changes in this set of PCI kernels when
they are compiled w/o 'options DIAGNOSTIC' and w/ -V MKREPRO=yes:

algor P4032 P5064 P6032
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE
evbarm-el GUMSTIX HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321
evbarm-el IXDP425 IXM1200 KUROBOX_PRO
evbarm-el LUBBOCK MARVELL_NAS NAPPI NSLU2 SHEEVAPLUG SMDK2800 TEAMASA_NPWR
evbarm-el TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
evbppc OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
iyonix GENERIC
landisk GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sbmips-el GENERIC
sgimips GENERIC32_IP2x GENERIC32_IP3x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

Now that GENERIC32_IPX3x builds again, fix some pci_attach_args
constification that I'd missed.

Merge forward matt-nb5-mips64
Adapt to new interrupt/spl framework
Deal with arcbios calls being O32 and kernels being N32/N64.
Need to save/restore T8 across arcbios calls.

branches: 1.9.54; 1.9.58; 1.9.64; 1.9.66;
Nuke homegrown PCI configuration routines. #ifdef'd out by tsutsui@ a long
time ago; this is just garbage collection.

branches: 1.8.8; 1.8.12; 1.8.14;
Generalise pci/pci_machdep.c further and move all mace-specific code into
mace/pci_mace.c in preparation for pci devices on the gio(4) bus.

branches: 1.7.6;
Switch macepci to use MI pci_configure_bus(9) rather than its own fixup code.
Tested on my O2 with several devices, and ok'ed by sekiya.

branches: 1.6.4; 1.6.6; 1.6.8; 1.6.10; 1.6.12;
merge ktrace-lwp.

branches: 1.5.12;
Use ANSI function declarations.

Use the mace interrupt handler for PCI interrupts.

From KIYOHARA Takashi

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

branches: 1.2.4;
Checking for IP32 in each driver is redundant -- they're attached as children
of mace, so it is sufficient to perform the check in mace_match(). Pointed
out by soren@.

Following the example of the hpc/, gio/, and ioc/ directories, move the
mace devices to their own mace/ directory. Alter conf/files.sgimips to
reflect this change in a sane manner (i.e., pull in dev/files.dev and
mace/files.mace when appropriate).

At the same time, allow crime_intr_establish() to fall through to
mace_intr_establish(). mace devices now call cpu_intr_establish().

Merge thorpej-cfargs2.

branches: 1.24.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.23.4;
Overhaul the interface to pci_configure_bus():
- Don't expose how PCI bus configuration resource management is implemented.
Provide a new resource provider API:

==> pciconf_resource_init() -- Initialize a PCI configuration resources
container.
==> pciconf_resource_add() -- Add a PCI configuration resource to the
container (I/O, MEM, or prefetchable MEM). Multiple resources of
each type may be added.
==> pciconf_resource_fini() -- Tear down the PCI configurtation resources
container once the bus has been configured.

This is much easier to use than the previous method of providing an
extent map for each kind of resource, and works better for e.g. ACPI
platforms that provide potentially multiple PCI resources in tables
provided by firmware.

- Re-implement PCI configuration resource management using vmem arenas,
rather than extent maps.

replace EX_NOWAIT with EX_WAITOK in device attach methods.
remove checks for failures that can no longer occur.

simplify macepci_intr():
- use uint32_t
- always clear all error bits
- avoid a compiler bug(?) which caused the test for MACE_PERR_MASTER_ABORT
to fail on n32
now my O2 no longer hangs when leaving cold

branches: 1.20.2;
PCI Extended Configuration stuff written by nonaka@:
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific

on mips64 we can use the whole PCI space, not just the two 32MB windows
accessible via KSEG*

switch sgimips to common bus_dma and bus_space in arch/mips/
Tested on O2 and Indy.
Things that are compile-tested only for lack of hardware:
- GIO ethernet cards with PCI bridges
- IP2x hardware not found on Indy
- IP1x

branches: 1.17.6;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

kill sprintf.

branches: 1.15.2;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.14.6;
converting extent(9) from malloc(9) to kmem(9)
preceding kmem-vmem-pool-uvm patch

releng@ acknowledged

branches: 1.13.2; 1.13.6;
#include <sys/bus.h> instead of <machine/bus.h>.

PCI_FLAGS_IO_ENABLED and PCI_FLAGS_MEM_ENABLED changed their functional
role in NetBSD (drivers are no longer supposed to write these to
pa_flags) without changing name. Correct that.

Rename PCI_FLAGS_IO_ENABLED to PCI_FLAGS_IO_OKAY and
PCI_FLAGS_MEM_ENABLED to PCI_FLAGS_MEM_OKAY, thus making their names
consistent with the other PCI flags and poisoning 3rd-party driver
sources that use the flags in the old bad way.

This patch produces no binary changes in this set of PCI kernels when
they are compiled w/o 'options DIAGNOSTIC' and w/ -V MKREPRO=yes:

algor P4032 P5064 P6032
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE
evbarm-el GUMSTIX HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321
evbarm-el IXDP425 IXM1200 KUROBOX_PRO
evbarm-el LUBBOCK MARVELL_NAS NAPPI NSLU2 SHEEVAPLUG SMDK2800 TEAMASA_NPWR
evbarm-el TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
evbppc OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
iyonix GENERIC
landisk GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sbmips-el GENERIC
sgimips GENERIC32_IP2x GENERIC32_IP3x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

Now that GENERIC32_IPX3x builds again, fix some pci_attach_args
constification that I'd missed.

Merge forward matt-nb5-mips64
Adapt to new interrupt/spl framework
Deal with arcbios calls being O32 and kernels being N32/N64.
Need to save/restore T8 across arcbios calls.

branches: 1.9.54; 1.9.58; 1.9.64; 1.9.66;
Nuke homegrown PCI configuration routines. #ifdef'd out by tsutsui@ a long
time ago; this is just garbage collection.

branches: 1.8.8; 1.8.12; 1.8.14;
Generalise pci/pci_machdep.c further and move all mace-specific code into
mace/pci_mace.c in preparation for pci devices on the gio(4) bus.

branches: 1.7.6;
Switch macepci to use MI pci_configure_bus(9) rather than its own fixup code.
Tested on my O2 with several devices, and ok'ed by sekiya.

branches: 1.6.4; 1.6.6; 1.6.8; 1.6.10; 1.6.12;
merge ktrace-lwp.

branches: 1.5.12;
Use ANSI function declarations.

Use the mace interrupt handler for PCI interrupts.

From KIYOHARA Takashi

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

branches: 1.2.4;
Checking for IP32 in each driver is redundant -- they're attached as children
of mace, so it is sufficient to perform the check in mace_match(). Pointed
out by soren@.

Following the example of the hpc/, gio/, and ioc/ directories, move the
mace devices to their own mace/ directory. Alter conf/files.sgimips to
reflect this change in a sane manner (i.e., pull in dev/files.dev and
mace/files.mace when appropriate).

At the same time, allow crime_intr_establish() to fall through to
mace_intr_establish(). mace devices now call cpu_intr_establish().

Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.23.4;
Overhaul the interface to pci_configure_bus():
- Don't expose how PCI bus configuration resource management is implemented.
Provide a new resource provider API:

==> pciconf_resource_init() -- Initialize a PCI configuration resources
container.
==> pciconf_resource_add() -- Add a PCI configuration resource to the
container (I/O, MEM, or prefetchable MEM). Multiple resources of
each type may be added.
==> pciconf_resource_fini() -- Tear down the PCI configurtation resources
container once the bus has been configured.

This is much easier to use than the previous method of providing an
extent map for each kind of resource, and works better for e.g. ACPI
platforms that provide potentially multiple PCI resources in tables
provided by firmware.

- Re-implement PCI configuration resource management using vmem arenas,
rather than extent maps.

replace EX_NOWAIT with EX_WAITOK in device attach methods.
remove checks for failures that can no longer occur.

simplify macepci_intr():
- use uint32_t
- always clear all error bits
- avoid a compiler bug(?) which caused the test for MACE_PERR_MASTER_ABORT
to fail on n32
now my O2 no longer hangs when leaving cold

branches: 1.20.2;
PCI Extended Configuration stuff written by nonaka@:
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific

on mips64 we can use the whole PCI space, not just the two 32MB windows
accessible via KSEG*

switch sgimips to common bus_dma and bus_space in arch/mips/
Tested on O2 and Indy.
Things that are compile-tested only for lack of hardware:
- GIO ethernet cards with PCI bridges
- IP2x hardware not found on Indy
- IP1x

branches: 1.17.6;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

kill sprintf.

branches: 1.15.2;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.14.6;
converting extent(9) from malloc(9) to kmem(9)
preceding kmem-vmem-pool-uvm patch

releng@ acknowledged

branches: 1.13.2; 1.13.6;
#include <sys/bus.h> instead of <machine/bus.h>.

PCI_FLAGS_IO_ENABLED and PCI_FLAGS_MEM_ENABLED changed their functional
role in NetBSD (drivers are no longer supposed to write these to
pa_flags) without changing name. Correct that.

Rename PCI_FLAGS_IO_ENABLED to PCI_FLAGS_IO_OKAY and
PCI_FLAGS_MEM_ENABLED to PCI_FLAGS_MEM_OKAY, thus making their names
consistent with the other PCI flags and poisoning 3rd-party driver
sources that use the flags in the old bad way.

This patch produces no binary changes in this set of PCI kernels when
they are compiled w/o 'options DIAGNOSTIC' and w/ -V MKREPRO=yes:

algor P4032 P5064 P6032
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE
evbarm-el GUMSTIX HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321
evbarm-el IXDP425 IXM1200 KUROBOX_PRO
evbarm-el LUBBOCK MARVELL_NAS NAPPI NSLU2 SHEEVAPLUG SMDK2800 TEAMASA_NPWR
evbarm-el TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
evbppc OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
iyonix GENERIC
landisk GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sbmips-el GENERIC
sgimips GENERIC32_IP2x GENERIC32_IP3x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

Now that GENERIC32_IPX3x builds again, fix some pci_attach_args
constification that I'd missed.

Merge forward matt-nb5-mips64
Adapt to new interrupt/spl framework
Deal with arcbios calls being O32 and kernels being N32/N64.
Need to save/restore T8 across arcbios calls.

branches: 1.9.54; 1.9.58; 1.9.64; 1.9.66;
Nuke homegrown PCI configuration routines. #ifdef'd out by tsutsui@ a long
time ago; this is just garbage collection.

branches: 1.8.8; 1.8.12; 1.8.14;
Generalise pci/pci_machdep.c further and move all mace-specific code into
mace/pci_mace.c in preparation for pci devices on the gio(4) bus.

branches: 1.7.6;
Switch macepci to use MI pci_configure_bus(9) rather than its own fixup code.
Tested on my O2 with several devices, and ok'ed by sekiya.

branches: 1.6.4; 1.6.6; 1.6.8; 1.6.10; 1.6.12;
merge ktrace-lwp.

branches: 1.5.12;
Use ANSI function declarations.

Use the mace interrupt handler for PCI interrupts.

From KIYOHARA Takashi

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

branches: 1.2.4;
Checking for IP32 in each driver is redundant -- they're attached as children
of mace, so it is sufficient to perform the check in mace_match(). Pointed
out by soren@.

Following the example of the hpc/, gio/, and ioc/ directories, move the
mace devices to their own mace/ directory. Alter conf/files.sgimips to
reflect this change in a sane manner (i.e., pull in dev/files.dev and
mace/files.mace when appropriate).

At the same time, allow crime_intr_establish() to fall through to
mace_intr_establish(). mace devices now call cpu_intr_establish().

Overhaul the interface to pci_configure_bus():
- Don't expose how PCI bus configuration resource management is implemented.
Provide a new resource provider API:

==> pciconf_resource_init() -- Initialize a PCI configuration resources
container.
==> pciconf_resource_add() -- Add a PCI configuration resource to the
container (I/O, MEM, or prefetchable MEM). Multiple resources of
each type may be added.
==> pciconf_resource_fini() -- Tear down the PCI configurtation resources
container once the bus has been configured.

This is much easier to use than the previous method of providing an
extent map for each kind of resource, and works better for e.g. ACPI
platforms that provide potentially multiple PCI resources in tables
provided by firmware.

- Re-implement PCI configuration resource management using vmem arenas,
rather than extent maps.

replace EX_NOWAIT with EX_WAITOK in device attach methods.
remove checks for failures that can no longer occur.

simplify macepci_intr():
- use uint32_t
- always clear all error bits
- avoid a compiler bug(?) which caused the test for MACE_PERR_MASTER_ABORT
to fail on n32
now my O2 no longer hangs when leaving cold

branches: 1.20.2;
PCI Extended Configuration stuff written by nonaka@:
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific

on mips64 we can use the whole PCI space, not just the two 32MB windows
accessible via KSEG*

switch sgimips to common bus_dma and bus_space in arch/mips/
Tested on O2 and Indy.
Things that are compile-tested only for lack of hardware:
- GIO ethernet cards with PCI bridges
- IP2x hardware not found on Indy
- IP1x

branches: 1.17.6;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

kill sprintf.

branches: 1.15.2;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.14.6;
converting extent(9) from malloc(9) to kmem(9)
preceding kmem-vmem-pool-uvm patch

releng@ acknowledged

branches: 1.13.2; 1.13.6;
#include <sys/bus.h> instead of <machine/bus.h>.

PCI_FLAGS_IO_ENABLED and PCI_FLAGS_MEM_ENABLED changed their functional
role in NetBSD (drivers are no longer supposed to write these to
pa_flags) without changing name. Correct that.

Rename PCI_FLAGS_IO_ENABLED to PCI_FLAGS_IO_OKAY and
PCI_FLAGS_MEM_ENABLED to PCI_FLAGS_MEM_OKAY, thus making their names
consistent with the other PCI flags and poisoning 3rd-party driver
sources that use the flags in the old bad way.

This patch produces no binary changes in this set of PCI kernels when
they are compiled w/o 'options DIAGNOSTIC' and w/ -V MKREPRO=yes:

algor P4032 P5064 P6032
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE
evbarm-el GUMSTIX HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321
evbarm-el IXDP425 IXM1200 KUROBOX_PRO
evbarm-el LUBBOCK MARVELL_NAS NAPPI NSLU2 SHEEVAPLUG SMDK2800 TEAMASA_NPWR
evbarm-el TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
evbppc OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
iyonix GENERIC
landisk GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sbmips-el GENERIC
sgimips GENERIC32_IP2x GENERIC32_IP3x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

Now that GENERIC32_IPX3x builds again, fix some pci_attach_args
constification that I'd missed.

Merge forward matt-nb5-mips64
Adapt to new interrupt/spl framework
Deal with arcbios calls being O32 and kernels being N32/N64.
Need to save/restore T8 across arcbios calls.

branches: 1.9.54; 1.9.58; 1.9.64; 1.9.66;
Nuke homegrown PCI configuration routines. #ifdef'd out by tsutsui@ a long
time ago; this is just garbage collection.

branches: 1.8.8; 1.8.12; 1.8.14;
Generalise pci/pci_machdep.c further and move all mace-specific code into
mace/pci_mace.c in preparation for pci devices on the gio(4) bus.

branches: 1.7.6;
Switch macepci to use MI pci_configure_bus(9) rather than its own fixup code.
Tested on my O2 with several devices, and ok'ed by sekiya.

branches: 1.6.4; 1.6.6; 1.6.8; 1.6.10; 1.6.12;
merge ktrace-lwp.

branches: 1.5.12;
Use ANSI function declarations.

Use the mace interrupt handler for PCI interrupts.

From KIYOHARA Takashi

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

branches: 1.2.4;
Checking for IP32 in each driver is redundant -- they're attached as children
of mace, so it is sufficient to perform the check in mace_match(). Pointed
out by soren@.

Following the example of the hpc/, gio/, and ioc/ directories, move the
mace devices to their own mace/ directory. Alter conf/files.sgimips to
reflect this change in a sane manner (i.e., pull in dev/files.dev and
mace/files.mace when appropriate).

At the same time, allow crime_intr_establish() to fall through to
mace_intr_establish(). mace devices now call cpu_intr_establish().

replace EX_NOWAIT with EX_WAITOK in device attach methods.
remove checks for failures that can no longer occur.

simplify macepci_intr():
- use uint32_t
- always clear all error bits
- avoid a compiler bug(?) which caused the test for MACE_PERR_MASTER_ABORT
to fail on n32
now my O2 no longer hangs when leaving cold

branches: 1.20.2;
PCI Extended Configuration stuff written by nonaka@:
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific

on mips64 we can use the whole PCI space, not just the two 32MB windows
accessible via KSEG*

switch sgimips to common bus_dma and bus_space in arch/mips/
Tested on O2 and Indy.
Things that are compile-tested only for lack of hardware:
- GIO ethernet cards with PCI bridges
- IP2x hardware not found on Indy
- IP1x

branches: 1.17.6;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

kill sprintf.

branches: 1.15.2;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.14.6;
converting extent(9) from malloc(9) to kmem(9)
preceding kmem-vmem-pool-uvm patch

releng@ acknowledged

branches: 1.13.2; 1.13.6;
#include <sys/bus.h> instead of <machine/bus.h>.

PCI_FLAGS_IO_ENABLED and PCI_FLAGS_MEM_ENABLED changed their functional
role in NetBSD (drivers are no longer supposed to write these to
pa_flags) without changing name. Correct that.

Rename PCI_FLAGS_IO_ENABLED to PCI_FLAGS_IO_OKAY and
PCI_FLAGS_MEM_ENABLED to PCI_FLAGS_MEM_OKAY, thus making their names
consistent with the other PCI flags and poisoning 3rd-party driver
sources that use the flags in the old bad way.

This patch produces no binary changes in this set of PCI kernels when
they are compiled w/o 'options DIAGNOSTIC' and w/ -V MKREPRO=yes:

algor P4032 P5064 P6032
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE
evbarm-el GUMSTIX HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321
evbarm-el IXDP425 IXM1200 KUROBOX_PRO
evbarm-el LUBBOCK MARVELL_NAS NAPPI NSLU2 SHEEVAPLUG SMDK2800 TEAMASA_NPWR
evbarm-el TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
evbppc OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
iyonix GENERIC
landisk GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sbmips-el GENERIC
sgimips GENERIC32_IP2x GENERIC32_IP3x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

Now that GENERIC32_IPX3x builds again, fix some pci_attach_args
constification that I'd missed.

Merge forward matt-nb5-mips64
Adapt to new interrupt/spl framework
Deal with arcbios calls being O32 and kernels being N32/N64.
Need to save/restore T8 across arcbios calls.

branches: 1.9.54; 1.9.58; 1.9.64; 1.9.66;
Nuke homegrown PCI configuration routines. #ifdef'd out by tsutsui@ a long
time ago; this is just garbage collection.

branches: 1.8.8; 1.8.12; 1.8.14;
Generalise pci/pci_machdep.c further and move all mace-specific code into
mace/pci_mace.c in preparation for pci devices on the gio(4) bus.

branches: 1.7.6;
Switch macepci to use MI pci_configure_bus(9) rather than its own fixup code.
Tested on my O2 with several devices, and ok'ed by sekiya.

branches: 1.6.4; 1.6.6; 1.6.8; 1.6.10; 1.6.12;
merge ktrace-lwp.

branches: 1.5.12;
Use ANSI function declarations.

Use the mace interrupt handler for PCI interrupts.

From KIYOHARA Takashi

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

branches: 1.2.4;
Checking for IP32 in each driver is redundant -- they're attached as children
of mace, so it is sufficient to perform the check in mace_match(). Pointed
out by soren@.

Following the example of the hpc/, gio/, and ioc/ directories, move the
mace devices to their own mace/ directory. Alter conf/files.sgimips to
reflect this change in a sane manner (i.e., pull in dev/files.dev and
mace/files.mace when appropriate).

At the same time, allow crime_intr_establish() to fall through to
mace_intr_establish(). mace devices now call cpu_intr_establish().

simplify macepci_intr():
- use uint32_t
- always clear all error bits
- avoid a compiler bug(?) which caused the test for MACE_PERR_MASTER_ABORT
to fail on n32
now my O2 no longer hangs when leaving cold

branches: 1.20.2;
PCI Extended Configuration stuff written by nonaka@:
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific

on mips64 we can use the whole PCI space, not just the two 32MB windows
accessible via KSEG*

switch sgimips to common bus_dma and bus_space in arch/mips/
Tested on O2 and Indy.
Things that are compile-tested only for lack of hardware:
- GIO ethernet cards with PCI bridges
- IP2x hardware not found on Indy
- IP1x

branches: 1.17.6;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

kill sprintf.

branches: 1.15.2;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.14.6;
converting extent(9) from malloc(9) to kmem(9)
preceding kmem-vmem-pool-uvm patch

releng@ acknowledged

branches: 1.13.2; 1.13.6;
#include <sys/bus.h> instead of <machine/bus.h>.

PCI_FLAGS_IO_ENABLED and PCI_FLAGS_MEM_ENABLED changed their functional
role in NetBSD (drivers are no longer supposed to write these to
pa_flags) without changing name. Correct that.

Rename PCI_FLAGS_IO_ENABLED to PCI_FLAGS_IO_OKAY and
PCI_FLAGS_MEM_ENABLED to PCI_FLAGS_MEM_OKAY, thus making their names
consistent with the other PCI flags and poisoning 3rd-party driver
sources that use the flags in the old bad way.

This patch produces no binary changes in this set of PCI kernels when
they are compiled w/o 'options DIAGNOSTIC' and w/ -V MKREPRO=yes:

algor P4032 P5064 P6032
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE
evbarm-el GUMSTIX HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321
evbarm-el IXDP425 IXM1200 KUROBOX_PRO
evbarm-el LUBBOCK MARVELL_NAS NAPPI NSLU2 SHEEVAPLUG SMDK2800 TEAMASA_NPWR
evbarm-el TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
evbppc OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
iyonix GENERIC
landisk GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sbmips-el GENERIC
sgimips GENERIC32_IP2x GENERIC32_IP3x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

Now that GENERIC32_IPX3x builds again, fix some pci_attach_args
constification that I'd missed.

Merge forward matt-nb5-mips64
Adapt to new interrupt/spl framework
Deal with arcbios calls being O32 and kernels being N32/N64.
Need to save/restore T8 across arcbios calls.

branches: 1.9.54; 1.9.58; 1.9.64; 1.9.66;
Nuke homegrown PCI configuration routines. #ifdef'd out by tsutsui@ a long
time ago; this is just garbage collection.

branches: 1.8.8; 1.8.12; 1.8.14;
Generalise pci/pci_machdep.c further and move all mace-specific code into
mace/pci_mace.c in preparation for pci devices on the gio(4) bus.

branches: 1.7.6;
Switch macepci to use MI pci_configure_bus(9) rather than its own fixup code.
Tested on my O2 with several devices, and ok'ed by sekiya.

branches: 1.6.4; 1.6.6; 1.6.8; 1.6.10; 1.6.12;
merge ktrace-lwp.

branches: 1.5.12;
Use ANSI function declarations.

Use the mace interrupt handler for PCI interrupts.

From KIYOHARA Takashi

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

branches: 1.2.4;
Checking for IP32 in each driver is redundant -- they're attached as children
of mace, so it is sufficient to perform the check in mace_match(). Pointed
out by soren@.

Following the example of the hpc/, gio/, and ioc/ directories, move the
mace devices to their own mace/ directory. Alter conf/files.sgimips to
reflect this change in a sane manner (i.e., pull in dev/files.dev and
mace/files.mace when appropriate).

At the same time, allow crime_intr_establish() to fall through to
mace_intr_establish(). mace devices now call cpu_intr_establish().