Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Remove uscanner(4) driver

This exists for compatibility with a Linux interface which was apparently
deprecated in Linux 2.6. There are various mailing list threads going
back to 2004 where the usefulness of this driver is discussed, but
the conclusion is that scanner software has all moved to using ugen(4)
instead, and enabling this driver will not help you scan things.

branches: 1.244.4;
Turn on DIAGNOSTIC to help track down problem in hpcmips test runs

branches: 1.243.2;
Remove references to BRIDGE_IPF, it is now compiled in by default.

Remove uyap, USB YAP phone firmware loader.

And the associated ezload EZ-USB code, which is only used by uyap.
It could theoretically be used by other drivers, but none of them are
in tree.

I suspect that this device isn't in use, as phone technology has improved
a lot since 2001 when uyap(4) was added to the tree.

Proposed with no objections on netbsd-users on 13 April 2020

remove urio(4), a driver for the Rio500 MP3 player.

At this point it is highly unlikely this 1999 device still has users,
but it still comes up in the context of maxv's USB-fuzzing (and any device
could pretend to be a urio(4)), so it's best to get rid of it.

Renamed all major entries to obsolete, as was done in previous removals.

This still requires an update to sanitizers, but they're located in
"external", perhaps it should be first committed upstream?

Proposed on tech-kern a month ago.

branches: 1.240.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Add ure(4) to kernel config files. Also add PHY drivers where necessary.

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.235.2; 1.235.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.230.2;
Disable uscanner in all kernel configs

As discussed on current-users@, SANE uses ugen via libusb and not
uscanner, so users are not well served by having uscanner. Consensus
is that addressing how to adjust permissions for scanners should not
block restoring basic functionionality.

(Compile-tested only, but there are multiple reports of this being the
right approach.)

branches: 1.229.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Missing midi attachment.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.224.2;
Add commented out bpfjit options to mips kernels.
While here, add 2 missing RCS ids.

branches: 1.223.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.222.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.216.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.215.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.214.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.213.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.212.2; 1.212.4;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.208.2;
add uhso(4) device where appropriate
- follow the lead of other USB driver declarations wrt commented out
- (cross-)build tested all these kernels

branches: 1.207.2;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.203.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.201.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.200.6; 1.200.8; 1.200.10; 1.200.12;
Add a definition for Fujitsu PenCentra 200 and enable wsmouse at ucbtp.
Tested and requested by Risto Sainio.

Add "-mdivide-breaks" to CPUFLAGS in GENERIC, and
use "-march=r3900" for CPUFLAGS in TX3912 and TX3922.

The "-mips2" option seems to imply "-mdivide-traps" and
gcc4 with the option generates "teq" instruction on division ops,
but teq is not supported by TX39xx CPUs.

The problem is reported and the fix (-mdevide-breaks) is
provided by Risto Sainio. Tested on his PenCentra 200,
and also tested on Telios HC-AJ2 by nakayama@.

This should be pulled up to netbsd-4.

Remove systrace. Ok core@.

branches: 1.197.2; 1.197.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.196.10;
Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

branches: 1.195.6;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.194.2; 1.194.4; 1.194.8; 1.194.10; 1.194.12;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.193.2; 1.193.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

s/adpater/adapter/

Prompted by PR/34195

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.189.2;
spc(4) can also attach to pcmcia(4), as was already in hpcmips/GENERIC
for quite some time. Add it to all systems that have pcmcia SCSI.

Pointed out by Bj�rn Johannesson <rherdware@yahoo.com> in private mail,
OK'd by matt@

Remove "atapibus* at umass?" and "scsibus* at umass?" when there is
already an attachment to the interface attribute (atapi and scsi).

Part of PR#34085, although it is the contrary to what the submitter
suggests (which shows that having both in a config file can be confusing).

Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.186.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

Fix isaportoffset for SHARP_TRIPAD and VADEM_CLIO_C.
Patch from Matthew Orgass on port-hpcmips, as part of PR port-hpcmips/28228.

branches: 1.184.2; 1.184.4; 1.184.6;
Fix typo (Prolofic -> Prolific).

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.181.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.180.2; 1.180.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

Add (commented out) ucycom to various kernel configs.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

Add LCD and battery control support for Sharp Telios series.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.168.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

OptPoint on Telios HC-AJ2 (and maybe AJ1) support

Add ukyopon(4).

branches: 1.165.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.160.4; 1.160.6;
Add COMPAT_BSDPTY to the rest of the config files.

s/uax/axe/

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

use HCAJ, HCVJ group instead of HCAJ1, HCVJ1C_JP

Enable DDB history by default.

xi -> xirc,com,xi

Add mhzc and spc.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

fix iochip configuration.
reported by Alexander Frolkin <avf@ox.compsoc.net>

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

Move -mips2 to CPUFLAGS in each kernel config file as suggested by mrg.
This matches the way other ports specify default CPU codegen options.

enable speaker port 12 for NEC MCCS series.
reported by http://www.jp.netbsd.org/ja/JP/ml/port-hpcmips-ja/200207/msg00078.html.

branches: 1.145.2;
fix indentation.

Add MobilePro 880 (MC/R730A), MC/R730 support for USB/"pci".
Addresses PR/23654.

Add MC/R700A, MC/R730, and MC/R730A vrc4172pwm flags.
Addresses PR/23653.

Add COMPAT_16 where missing.
Remove the unused COMPAT_15.
Comment out/remove COMPAT_* from INSTALL kernels.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus

add udav*

branches: 1.138.2;
Add pseudo-device ksyms.

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Add uax(4) (and url(4) in some cases).

Added Vrc4173PIU. (touch panel interface unit on Vrc4173)

comment 'makeoptions DEFGP="-G nn"' to resolve gp-size overflow.
even NULLCONF requires "-G 0".
fix PR kern/19184.

Added xi to GENERIC. (PR port-hpcmips/19059)

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

Initial addition of TrackPoint support on the IBM WorkPad z50's DSIU port.

branches: 1.126.2; 1.126.4;
BUGFIX: Xhpc dumps core on SigmarionII.
Attached MQ200 video controller at PCI bus.

Enabeled OHCI USB controller on MobilePro 800.

Added ukphy to use USB ethernet adopters.

Fixed line order. It was strange.

Fixed PC Card slot support.

Enable USB support for MC-R700.

* make kloader optional.
* default value of kernel path is KLOADER_KERNEL_PATH.
* options KLOADER_KERNEL_PATH can override kernel path.
* when bootstr is passed (RB_STRING), use it as kernel path.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

renumber IT310 staff.

add Fujitsu INTERTOP CX310 support.

enable NFSSERVER.

reduce GP size.

enable kloader.

add LKM.

Added Vrc4172 USB OHCI for Pencentra 130.

Attached vrpiu at vrc4173bcu.

Attached vrkiu at vrc4173bcu.

Remove HPCMIPS_FLUSHCACHE_XXX debug code.

Added Vr4122 and Vr4131 support to GENERIC configuration.

Added vr4102ip.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Adjusted GP size.

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

VR41XX/TX3922 common kernel.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

increase the value of maxusers to 16.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.96.2;
The wsmux pseudo device does not need a count anymore.

MCR-300/310/320/330/for Docomo have same PWCTL_LCDLIGHT, PWCTL_LCD port.

branches: 1.94.4;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.92.2;
Cosmetic changes:
- Use tab instead of many spaces
- options<SPC><TAB>

Vrc4172 GPIO support. This device is currently configured on PenCentra 130.

vlan does not belong to group of IPv6 pseudo-devices

change maxusers 8 -> 10.
without this change, 'make build' will fail.

- fix comment for MCR/530.
- add MCR/530A(MobilePro780) PWCTL_COM0 device.
- add MC-R520A(MobilePro770) BTN_COVER device,
but commented because of no checking.
- add MC/R530A(MobilePro780) BTN_COVER device,
but commented because of no checking.

enlarge MSGBUFSIZE for -v option.

options<TAB><TAB> -> options<SPACE><TAB>

opt_vr41x1.h -> opt_vr41xx.h.
add 'options VR41XX' and kill 'options VR41X1'.

add 'options VR4101' (not yet supported)
add 'options VR4102'
add 'options VR4111'
add 'options VR4121'
add 'options VR4122' (not yet supported)
add 'options VR4181' (not yet supported)
these are for config level size optimization.
currenty, no optimization codes are exist.
NOTE: there are some incompatibility in VR4181 & VR4101 &
VR4102,4111,4121 group & VR4122.

GENERIC (for VR41XX series) has options VR4102, VR4111, VR4121.

add vrc4172pwm for MC-R510, MC-R520.

Add MQ200_USECRT option, which enables CRT output on MC/R530.
This is kernel configuration option and you can't enable and disable CRT
dynamically for now.

add vrc4172pwm for MC/R520A(MobilePro770)

comment out:options WSDISPLAY_DEFAULTSCREENS=4

Apply 'CF hack' to all model of Cassiopeia E series.

branches: 1.79.2;
add MC/R430(copy of MC/R530)

add vrc4172pwm for MC/R530A, MC-R700.

register vrc4172pwm driver for MC/R530 etc..

Add ray at pcmcia.

fix MC/R530's COM0 power GPIO port number.

Add Aironet.

Add pseudo-device vlan

Add #UVMHIST line (commented out).

BUGFIX: PCKBD_LAYOUT had not been effective.

vr41xx LED unit driver.

experimental ite8181 video driver for hpcfb.
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak,

add 'options VNODE_OP_NOINLINE' to reduce size.

add DoCoMo sigmarion cover button.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

skbd -> hpckbd. hpckbd supports vrkiu as well as m38813c and tc5165.

add SPEAKER pwctl device for several machines.

add pwctl PWCTL_LCD, PWCTL_LCDLIGHT for NEC_MCR_FORDOCOMO, NEC_MCR_500.

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)

Moving to a default of 64 PTYs.

Experimental MQ200 video driver. It's just copy of bivideo plus power
management routine.

kgdb support for the vr hpcmips machines.
From Ethan Solomita (ethan@geocast.com).

Experimental APM compatible power management.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.54.2;
for size reduction.
out:
SCSIVERBOSE
QUOTA
ccd

we support CD-ROM drives, so CD9660 is necessary.
in:
CD9660

Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

Add platid, VADEM CLIO C-1000 and C1050.
Note: CLIO C-1000 is identical with SHARP Tripad PV6000.

branches: 1.51.2;
delete undefined 'NEC_MCR_4XX'.

NEC MC-CS LIGHT button.
NEC MC-R430 COM0 power.
CASIO E55 COM0 power.
CASIO E55 LIGHT button.

Add some lines to support ATAPI and SCSI devices.
This makes the kernel 60KB bigger.

Raw keyboard mode support. I'd tested this on MC/R530.
I don't sure if skbd work or not.

delete obsolete 'options MIPS_16K_PAGE'.

fix comment.

remove COMPAT_386BSD_MBRPART
remove COMAPT_13, COMPAT_14. hpcmips appears NetBSD 1.5.

add stf pseudo interface (commented out due to possible security risks)

Add pseudo device 'rnd' for /dev/random.

MCR-300, MC-CS LCD on/off port.

add MC-CS backlight control.

sync with fb->hpcfb, btnmgr changes.

add BTN_COVER for MC-R520.

add PWCTL_LCDLIGHT for MC-R300

Add wsmux device which is real device in /dev.

Change btnmgr to wskbd device from pseudo device.

New frame buffer driver 'hpcfb' and built in video controller 'bivideo'

configure controller 0 only (workaround for phantom PCIC).

GENERIC configration includes Cassiopeia E-55 CF card support.

Delete #ifdef USE_RASTERCONS lines, which are not used.

On [port-hpcmips-ja@jp.netbsd.org:1764]
suz@hpc.bs1.fc.nec.co.jp (Koji Suzuki) writes
Sample configration for cassipeia E-55 & E-500
// wdc1 line deleted from original.

Fix obvious typo.

delete NKMEMCLUSTERS from configuration files.

Add com0's power control ID.

- add GPIO related comments.
- add IBM WorkPad z50 buttons.

add BTN_COVER for MC-R700, MC/R730.

- add MC-R510 & MC-R530 cover button.
- add MC-R530 application dial button.
- add comment for no RTC_OFFSET.

Add commented out "ident"-command

Add overlay to kernel configs.

add options for sysinst (memory disk size etc.)

add Vadem Clio and Sharp Tripad

add MSDOSFS
delete redundant kernel 'config' lines.
add new option '-b={wd0,sd0,nfs}' to change boot device.

VR41xx's PIU (Touch panel I/F unit) suport.
Currently it emulates relative pointing device like mouse, but it should
behave like an absolute pointing device. It needs more works in wsmouse side.

New button handler and power controller with configurable hooking mechanism.

add Fujitsu INTERTOP CX300.

Add new device vrdsu, with which we can hard reset the VR41xx CPU.
Why don't you try shutdown comand with option '-r ?

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

add MCCS comctrl (GPIO 14)
add IBM WorkPad z50

merge GENERIC.v6 to GENERIC

Add commented out option SOFTDEP to all GENERIC kernels.

GENERIC_JP include GENERIC.

Use tabs to indent.

Do options<space><tab> magic.

Wsdisplay use small font, VT220 8x10.

fix comment.

remove unnecessary quotation.

replace tab in ascii figure with space.

Wsdisplay and wskbd are supported as a console device.

branches: 1.3.2; 1.3.4;
Remove options FIFO and MULTICAST. They aren't optional.

branches: 1.2.2;
[new options]

options MIPS3_4100 /* VR4100 core */
options MIPS_16K_PAGE /* enable kernel support for 16k pages */
options SOFTFLOAT /* No FPU; avoid touching FPU registers */

branches: 1.1.1;
Initial revision

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Remove uscanner(4) driver

This exists for compatibility with a Linux interface which was apparently
deprecated in Linux 2.6. There are various mailing list threads going
back to 2004 where the usefulness of this driver is discussed, but
the conclusion is that scanner software has all moved to using ugen(4)
instead, and enabling this driver will not help you scan things.

branches: 1.244.4;
Turn on DIAGNOSTIC to help track down problem in hpcmips test runs

branches: 1.243.2;
Remove references to BRIDGE_IPF, it is now compiled in by default.

Remove uyap, USB YAP phone firmware loader.

And the associated ezload EZ-USB code, which is only used by uyap.
It could theoretically be used by other drivers, but none of them are
in tree.

I suspect that this device isn't in use, as phone technology has improved
a lot since 2001 when uyap(4) was added to the tree.

Proposed with no objections on netbsd-users on 13 April 2020

remove urio(4), a driver for the Rio500 MP3 player.

At this point it is highly unlikely this 1999 device still has users,
but it still comes up in the context of maxv's USB-fuzzing (and any device
could pretend to be a urio(4)), so it's best to get rid of it.

Renamed all major entries to obsolete, as was done in previous removals.

This still requires an update to sanitizers, but they're located in
"external", perhaps it should be first committed upstream?

Proposed on tech-kern a month ago.

branches: 1.240.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Add ure(4) to kernel config files. Also add PHY drivers where necessary.

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.235.2; 1.235.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.230.2;
Disable uscanner in all kernel configs

As discussed on current-users@, SANE uses ugen via libusb and not
uscanner, so users are not well served by having uscanner. Consensus
is that addressing how to adjust permissions for scanners should not
block restoring basic functionionality.

(Compile-tested only, but there are multiple reports of this being the
right approach.)

branches: 1.229.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Missing midi attachment.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.224.2;
Add commented out bpfjit options to mips kernels.
While here, add 2 missing RCS ids.

branches: 1.223.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.222.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.216.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.215.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.214.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.213.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.212.2; 1.212.4;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.208.2;
add uhso(4) device where appropriate
- follow the lead of other USB driver declarations wrt commented out
- (cross-)build tested all these kernels

branches: 1.207.2;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.203.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.201.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.200.6; 1.200.8; 1.200.10; 1.200.12;
Add a definition for Fujitsu PenCentra 200 and enable wsmouse at ucbtp.
Tested and requested by Risto Sainio.

Add "-mdivide-breaks" to CPUFLAGS in GENERIC, and
use "-march=r3900" for CPUFLAGS in TX3912 and TX3922.

The "-mips2" option seems to imply "-mdivide-traps" and
gcc4 with the option generates "teq" instruction on division ops,
but teq is not supported by TX39xx CPUs.

The problem is reported and the fix (-mdevide-breaks) is
provided by Risto Sainio. Tested on his PenCentra 200,
and also tested on Telios HC-AJ2 by nakayama@.

This should be pulled up to netbsd-4.

Remove systrace. Ok core@.

branches: 1.197.2; 1.197.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.196.10;
Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

branches: 1.195.6;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.194.2; 1.194.4; 1.194.8; 1.194.10; 1.194.12;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.193.2; 1.193.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

s/adpater/adapter/

Prompted by PR/34195

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.189.2;
spc(4) can also attach to pcmcia(4), as was already in hpcmips/GENERIC
for quite some time. Add it to all systems that have pcmcia SCSI.

Pointed out by Bj�rn Johannesson <rherdware@yahoo.com> in private mail,
OK'd by matt@

Remove "atapibus* at umass?" and "scsibus* at umass?" when there is
already an attachment to the interface attribute (atapi and scsi).

Part of PR#34085, although it is the contrary to what the submitter
suggests (which shows that having both in a config file can be confusing).

Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.186.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

Fix isaportoffset for SHARP_TRIPAD and VADEM_CLIO_C.
Patch from Matthew Orgass on port-hpcmips, as part of PR port-hpcmips/28228.

branches: 1.184.2; 1.184.4; 1.184.6;
Fix typo (Prolofic -> Prolific).

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.181.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.180.2; 1.180.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

Add (commented out) ucycom to various kernel configs.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

Add LCD and battery control support for Sharp Telios series.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.168.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

OptPoint on Telios HC-AJ2 (and maybe AJ1) support

Add ukyopon(4).

branches: 1.165.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.160.4; 1.160.6;
Add COMPAT_BSDPTY to the rest of the config files.

s/uax/axe/

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

use HCAJ, HCVJ group instead of HCAJ1, HCVJ1C_JP

Enable DDB history by default.

xi -> xirc,com,xi

Add mhzc and spc.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

fix iochip configuration.
reported by Alexander Frolkin <avf@ox.compsoc.net>

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

Move -mips2 to CPUFLAGS in each kernel config file as suggested by mrg.
This matches the way other ports specify default CPU codegen options.

enable speaker port 12 for NEC MCCS series.
reported by http://www.jp.netbsd.org/ja/JP/ml/port-hpcmips-ja/200207/msg00078.html.

branches: 1.145.2;
fix indentation.

Add MobilePro 880 (MC/R730A), MC/R730 support for USB/"pci".
Addresses PR/23654.

Add MC/R700A, MC/R730, and MC/R730A vrc4172pwm flags.
Addresses PR/23653.

Add COMPAT_16 where missing.
Remove the unused COMPAT_15.
Comment out/remove COMPAT_* from INSTALL kernels.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus

add udav*

branches: 1.138.2;
Add pseudo-device ksyms.

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Add uax(4) (and url(4) in some cases).

Added Vrc4173PIU. (touch panel interface unit on Vrc4173)

comment 'makeoptions DEFGP="-G nn"' to resolve gp-size overflow.
even NULLCONF requires "-G 0".
fix PR kern/19184.

Added xi to GENERIC. (PR port-hpcmips/19059)

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

Initial addition of TrackPoint support on the IBM WorkPad z50's DSIU port.

branches: 1.126.2; 1.126.4;
BUGFIX: Xhpc dumps core on SigmarionII.
Attached MQ200 video controller at PCI bus.

Enabeled OHCI USB controller on MobilePro 800.

Added ukphy to use USB ethernet adopters.

Fixed line order. It was strange.

Fixed PC Card slot support.

Enable USB support for MC-R700.

* make kloader optional.
* default value of kernel path is KLOADER_KERNEL_PATH.
* options KLOADER_KERNEL_PATH can override kernel path.
* when bootstr is passed (RB_STRING), use it as kernel path.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

renumber IT310 staff.

add Fujitsu INTERTOP CX310 support.

enable NFSSERVER.

reduce GP size.

enable kloader.

add LKM.

Added Vrc4172 USB OHCI for Pencentra 130.

Attached vrpiu at vrc4173bcu.

Attached vrkiu at vrc4173bcu.

Remove HPCMIPS_FLUSHCACHE_XXX debug code.

Added Vr4122 and Vr4131 support to GENERIC configuration.

Added vr4102ip.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Adjusted GP size.

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

VR41XX/TX3922 common kernel.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

increase the value of maxusers to 16.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.96.2;
The wsmux pseudo device does not need a count anymore.

MCR-300/310/320/330/for Docomo have same PWCTL_LCDLIGHT, PWCTL_LCD port.

branches: 1.94.4;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.92.2;
Cosmetic changes:
- Use tab instead of many spaces
- options<SPC><TAB>

Vrc4172 GPIO support. This device is currently configured on PenCentra 130.

vlan does not belong to group of IPv6 pseudo-devices

change maxusers 8 -> 10.
without this change, 'make build' will fail.

- fix comment for MCR/530.
- add MCR/530A(MobilePro780) PWCTL_COM0 device.
- add MC-R520A(MobilePro770) BTN_COVER device,
but commented because of no checking.
- add MC/R530A(MobilePro780) BTN_COVER device,
but commented because of no checking.

enlarge MSGBUFSIZE for -v option.

options<TAB><TAB> -> options<SPACE><TAB>

opt_vr41x1.h -> opt_vr41xx.h.
add 'options VR41XX' and kill 'options VR41X1'.

add 'options VR4101' (not yet supported)
add 'options VR4102'
add 'options VR4111'
add 'options VR4121'
add 'options VR4122' (not yet supported)
add 'options VR4181' (not yet supported)
these are for config level size optimization.
currenty, no optimization codes are exist.
NOTE: there are some incompatibility in VR4181 & VR4101 &
VR4102,4111,4121 group & VR4122.

GENERIC (for VR41XX series) has options VR4102, VR4111, VR4121.

add vrc4172pwm for MC-R510, MC-R520.

Add MQ200_USECRT option, which enables CRT output on MC/R530.
This is kernel configuration option and you can't enable and disable CRT
dynamically for now.

add vrc4172pwm for MC/R520A(MobilePro770)

comment out:options WSDISPLAY_DEFAULTSCREENS=4

Apply 'CF hack' to all model of Cassiopeia E series.

branches: 1.79.2;
add MC/R430(copy of MC/R530)

add vrc4172pwm for MC/R530A, MC-R700.

register vrc4172pwm driver for MC/R530 etc..

Add ray at pcmcia.

fix MC/R530's COM0 power GPIO port number.

Add Aironet.

Add pseudo-device vlan

Add #UVMHIST line (commented out).

BUGFIX: PCKBD_LAYOUT had not been effective.

vr41xx LED unit driver.

experimental ite8181 video driver for hpcfb.
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak,

add 'options VNODE_OP_NOINLINE' to reduce size.

add DoCoMo sigmarion cover button.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

skbd -> hpckbd. hpckbd supports vrkiu as well as m38813c and tc5165.

add SPEAKER pwctl device for several machines.

add pwctl PWCTL_LCD, PWCTL_LCDLIGHT for NEC_MCR_FORDOCOMO, NEC_MCR_500.

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)

Moving to a default of 64 PTYs.

Experimental MQ200 video driver. It's just copy of bivideo plus power
management routine.

kgdb support for the vr hpcmips machines.
From Ethan Solomita (ethan@geocast.com).

Experimental APM compatible power management.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.54.2;
for size reduction.
out:
SCSIVERBOSE
QUOTA
ccd

we support CD-ROM drives, so CD9660 is necessary.
in:
CD9660

Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

Add platid, VADEM CLIO C-1000 and C1050.
Note: CLIO C-1000 is identical with SHARP Tripad PV6000.

branches: 1.51.2;
delete undefined 'NEC_MCR_4XX'.

NEC MC-CS LIGHT button.
NEC MC-R430 COM0 power.
CASIO E55 COM0 power.
CASIO E55 LIGHT button.

Add some lines to support ATAPI and SCSI devices.
This makes the kernel 60KB bigger.

Raw keyboard mode support. I'd tested this on MC/R530.
I don't sure if skbd work or not.