Move the at-shutdown call to resettodr() from cpu_reboot() to kern_reboot().

It's a small step, but it's a step.

Remove unnecessary <sys/malloc.h>.

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.13.14; 1.13.16;
switch all ports to use uvm_init.c:uvm_md_init()

uvm_setpagesize() is now subsumed within this funciton.

branches: 1.12.14; 1.12.18;
Retire OSI network stack. OK core@

branches: 1.11.2; 1.11.12;
Cleanup includes. (<net/netisr.h> is handled by softints, not MD anymore,
so this can be nuked).

branches: 1.10.6;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

Don't init cpu_initclocks too early since that results in decrementer
exceptions before the exceptions have been setup.

branches: 1.8.4;
Use lwp_getpcb() on mips, powerpc and sh3, clean from struct user usage.

Ansify function definitions w/o arguments. Generated with sed.

branches: 1.6.4;
As discussed on tech-kern: mutex_init is too heavyweight for early bootstrap
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

It is not appropriate to call pmf_system_shutdown(9) from
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:

1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.

2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.

I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.

branches: 1.3.6; 1.3.8; 1.3.18;
Remove clause 3 and 4 from TNF licenses

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.22; 1.2.24; 1.2.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2; 1.1.6; 1.1.8;
file machdep.c was initially added on branch ppcoea-renovation.

Remove unnecessary <sys/malloc.h>.

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.13.14; 1.13.16;
switch all ports to use uvm_init.c:uvm_md_init()

uvm_setpagesize() is now subsumed within this funciton.

branches: 1.12.14; 1.12.18;
Retire OSI network stack. OK core@

branches: 1.11.2; 1.11.12;
Cleanup includes. (<net/netisr.h> is handled by softints, not MD anymore,
so this can be nuked).

branches: 1.10.6;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

Don't init cpu_initclocks too early since that results in decrementer
exceptions before the exceptions have been setup.

branches: 1.8.4;
Use lwp_getpcb() on mips, powerpc and sh3, clean from struct user usage.

Ansify function definitions w/o arguments. Generated with sed.

branches: 1.6.4;
As discussed on tech-kern: mutex_init is too heavyweight for early bootstrap
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

It is not appropriate to call pmf_system_shutdown(9) from
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:

1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.

2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.

I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.

branches: 1.3.6; 1.3.8; 1.3.18;
Remove clause 3 and 4 from TNF licenses

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.22; 1.2.24; 1.2.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2; 1.1.6; 1.1.8;
file machdep.c was initially added on branch ppcoea-renovation.

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.13.14;
switch all ports to use uvm_init.c:uvm_md_init()

uvm_setpagesize() is now subsumed within this funciton.

branches: 1.12.14; 1.12.18;
Retire OSI network stack. OK core@

branches: 1.11.2; 1.11.12;
Cleanup includes. (<net/netisr.h> is handled by softints, not MD anymore,
so this can be nuked).

branches: 1.10.6;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

Don't init cpu_initclocks too early since that results in decrementer
exceptions before the exceptions have been setup.

branches: 1.8.4;
Use lwp_getpcb() on mips, powerpc and sh3, clean from struct user usage.

Ansify function definitions w/o arguments. Generated with sed.

branches: 1.6.4;
As discussed on tech-kern: mutex_init is too heavyweight for early bootstrap
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

It is not appropriate to call pmf_system_shutdown(9) from
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:

1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.

2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.

I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.

branches: 1.3.6; 1.3.8; 1.3.18;
Remove clause 3 and 4 from TNF licenses

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.22; 1.2.24; 1.2.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2; 1.1.6; 1.1.8;
file machdep.c was initially added on branch ppcoea-renovation.

switch all ports to use uvm_init.c:uvm_md_init()

uvm_setpagesize() is now subsumed within this funciton.

Retire OSI network stack. OK core@

branches: 1.11.2; 1.11.12;
Cleanup includes. (<net/netisr.h> is handled by softints, not MD anymore,
so this can be nuked).

branches: 1.10.6;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

Don't init cpu_initclocks too early since that results in decrementer
exceptions before the exceptions have been setup.

branches: 1.8.4;
Use lwp_getpcb() on mips, powerpc and sh3, clean from struct user usage.

Ansify function definitions w/o arguments. Generated with sed.

branches: 1.6.4;
As discussed on tech-kern: mutex_init is too heavyweight for early bootstrap
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

It is not appropriate to call pmf_system_shutdown(9) from
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:

1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.

2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.

I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.

branches: 1.3.6; 1.3.8; 1.3.18;
Remove clause 3 and 4 from TNF licenses

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.22; 1.2.24; 1.2.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2; 1.1.6; 1.1.8;
file machdep.c was initially added on branch ppcoea-renovation.