KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled

KVM_FEATURE_PV_UNHALT is expected to get cleared from KVM PV feature CPUID
data when KVM_X86_DISABLE_EXITS_HLT is enabled. Add the corresponding test
to kvm_pv_test.

Note, the newly added code doesn't actually test KVM_FEATURE_PV_UNHALT and
KVM_X86_DISABLE_EXITS_HLT features.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240228101837.93642-4-vkuznets@redhat.com
[sean: add and use vcpu_cpuid_has()]
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add library for creating and interacting with SEV guests

Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.

Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add helpers for safe and safe+forced RDMSR, RDPMC, and XGETBV

Add helpers for safe and safe-with-forced-emulations versions of RDMSR,
RDPMC, and XGETBV. Use macro shenanigans to eliminate the rather large
amount of boilerplate needed to get values in and out of registers.

Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-29-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add a forced emulation variation of KVM_ASM_SAFE()

Add KVM_ASM_SAFE_FEP() to allow forcing emulation on an instruction that
might fault. Note, KVM skips RIP past the FEP prefix before injecting an
exception, i.e. the fixup needs to be on the instruction itself. Do not
check for FEP support, that is firmly the responsibility of whatever code
wants to use KVM_ASM_SAFE_FEP().

Sadly, chaining variadic arguments that contain commas doesn't work, thus
the unfortunate amount of copy+paste.

Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-28-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Move KVM_FEP macro into common library header

Move the KVM_FEP definition, a.k.a. the KVM force emulation prefix, into
processor.h so that it can be used for other tests besides the MSR filter
test.

Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-26-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Query module param to detect FEP in MSR filtering test

Add a helper to detect KVM support for forced emulation by querying the
module param, and use the helper to detect support for the MSR filtering
test instead of throwing a noodle/NOP at KVM to see if it sticks.

Cc: Aaron Lewis <aaronlewis@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-25-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add a helper to query if the PMU module param is enabled

Add a helper to probe KVM's "enable_pmu" param, open coding strings in
multiple places is just asking for false negatives and/or runtime errors
due to typos.

Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-23-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Extend {kvm,this}_pmu_has() to support fixed counters

Extend the kvm_x86_pmu_feature framework to allow querying for fixed
counters via {kvm,this}_pmu_has(). Like architectural events, checking
for a fixed counter annoyingly requires checking multiple CPUID fields, as
a fixed counter exists if:

FxCtr[i]_is_supported := ECX[i] || (EDX[4:0] > i);

Note, KVM currently doesn't actually support exposing fixed counters via
the bitmask, but that will hopefully change sooner than later, and Intel's
SDM explicitly "recommends" checking both the number of counters and the
mask.

Rename the intermedate "anti_feature" field to simply 'f' since the fixed
counter bitmask (thankfully) doesn't have reversed polarity like the
architectural events bitmask.

Note, ideally the helpers would use BUILD_BUG_ON() to assert on the
incoming register, but the expected usage in PMU tests can't guarantee the
inputs are compile-time constants.

Opportunistically define macros for all of the known architectural events
and fixed counters.

Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Drop the "name" param from KVM_X86_PMU_FEATURE()

Drop the "name" parameter from KVM_X86_PMU_FEATURE(), it's unused and
the name is redundant with the macro, i.e. it's truly useless.

Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add vcpu_set_cpuid_property() to set properties

Add vcpu_set_cpuid_property() helper function for setting properties, and
use it instead of open coding an equivalent for MAX_PHY_ADDR. Future vPMU
testcases will also need to stuff various CPUID properties.

Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Run clocksource dependent tests with hyperv_clocksource_tsc_page too

KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Generalize check_clocksource() from kvm_clock_test

Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add helpers to do KVM_HC_MAP_GPA_RANGE hypercalls (x86)

Add helpers for x86 guests to invoke the KVM_HC_MAP_GPA_RANGE hypercall,
which KVM will forward to userspace and thus can be used by tests to
coordinate private<=>shared conversions between host userspace code and
guest code.

Signed-off-by: Vishal Annapurve <vannapurve@google.com>
[sean: drop shared/private helpers (let tests specify flags)]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-29-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Force load all supported XSAVE state in state test

Extend x86's state to forcefully load *all* host-supported xfeatures by
modifying xstate_bv in the saved state. Stuffing xstate_bv ensures that
the selftest is verifying KVM's full ABI regardless of whether or not the
guest code is successful in getting various xfeatures out of their INIT
state, e.g. see the disaster that is/was MPX.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Touch relevant XSAVE state in guest for state test

Modify support XSAVE state in the "state test's" guest code so that saving
and loading state via KVM_{G,S}ET_XSAVE actually does something useful,
i.e. so that xstate_bv in XSAVE state isn't empty.

Punt on BNDCSR for now, it's easier to just stuff that xfeature from the
host side.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add x86 properties for Intel PMU in processor.h

Add x86 properties for Intel PMU so that tests don't have to manually
retrieve the correct CPUID leaf+register, and so that the resulting code
is self-documenting.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-2-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add test to verify KVM's supported XCR0

Check both architectural rules and KVM's ABI for KVM_GET_SUPPORTED_CPUID
to ensure the supported xfeatures[1] don't violate any of them.

The architectural rules[2] and KVM's contract with userspace ensure for a
given feature, e.g. sse, avx, amx, etc... their associated xfeatures are
either all sets or none of them are set, and any dependencies are enabled
if needed.

[1] EDX:EAX of CPUID.(EAX=0DH,ECX=0)
[2] SDM vol 1, 13.3 ENABLING THE XSAVE FEATURE SET AND XSAVE-ENABLED
FEATURES

Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: expand comments, use a fancy X86_PROPERTY]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add all known XFEATURE masks to common code

Add all known XFEATURE masks to processor.h to make them more broadly
available in KVM selftests. Relocate and clean up the exiting AMX (XTILE)
defines in processor.h, e.g. drop the intermediate define and use BIT_ULL.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Rework dynamic XFeature helper to take mask, not bit

Take the XFeature mask in __vm_xsave_require_permission() instead of the
bit so that there's no need to define macros for both the bit and the
mask. Asserting that only a single bit is set and retrieving said bit
is easy enough via log2 helpers.

Opportunistically clean up the error message for the
ARCH_REQ_XCOMP_GUEST_PERM sanity check.

Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Move XGETBV and XSETBV helpers to common code

The instructions XGETBV and XSETBV are useful to other tests. Move
them to processor.h to make them more broadly available.

No functional change intended.

Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
[sean: reword shortlog]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Verify KVM preserves userspace writes to "durable" MSRs

Assert that KVM provides "read what you wrote" semantics for all "durable"
MSRs (for lack of a better name). The extra coverage is cheap from a
runtime performance perspective, and verifying the behavior in the common
helper avoids gratuitous copy+paste in individual tests.

Note, this affects all tests that set MSRs from userspace!

Link: https://lore.kernel.org/r/20230311004618.920745-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Print out failing MSR and value in vcpu_set_msr()

Reimplement vcpu_set_msr() as a macro and pretty print the failing MSR
(when possible) and the value if KVM_SET_MSRS fails instead of using the
using the standard KVM_IOCTL_ERROR(). KVM_SET_MSRS is somewhat odd in
that it returns the index of the last successful write, i.e. will be
'0' on failure barring an entirely different KVM bug. And for writing
MSRs, the MSR being written and the value being written are almost always
relevant to the failure, i.e. just saying "failed!" doesn't help debug.

Place the string goo in a separate macro in anticipation of using it to
further expand MSR testing.

Link: https://lore.kernel.org/r/20230311004618.920745-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Check that XTILEDATA supports XFD

Check that XTILEDATA supports XFD. In amx_test, add the requirement that
the guest allows the xfeature, XTILEDATA, to be set in XFD. Otherwise, the
test may fail.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-14-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Check that the palette table exists before using it

Check that the palette table exists before using it. The maximum number of
AMX palette tables is enumerated by CPUID.1DH:EAX. Assert that the palette
used in amx_test, CPUID.1DH.1H, does not exceed that maximum.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-13-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add a fully functional "struct xstate" for x86

Add a working xstate data structure for the usage of AMX and potential
future usage on other xstate components. AMX selftest requires checking
both the xstate_bv and xcomp_bv. Existing code relies on pointer
arithmetics to fetch xstate_bv and does not support xcomp_bv.

So, add a working xstate data structure into processor.h for x86.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-3-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercalls

Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: x86: Cache host CPU vendor (AMD vs. Intel)

Cache the host CPU vendor for userspace and share it with guest code.

All the current callers of this_cpu* actually care about host cpu so
they are updated to check host_cpu_is*.

Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20230111004445.416840-3-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: x86: Use "this_cpu" prefix for cpu vendor queries

Replace is_intel/amd_cpu helpers with this_cpu_* helpers to better
convey the intent of querying vendor of the current cpu.

Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20230111004445.416840-2-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Fix a typo in the vcpu_msrs_set assert

The assert incorrectly identifies the ioctl being called. Switch it
from KVM_GET_MSRS to KVM_SET_MSRS.

Fixes: 6ebfef83f03f ("KVM: selftest: Add proper helpers for x86-specific save/restore ioctls")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221209201326.2781950-1-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Test Hyper-V invariant TSC control

Add a test for the newly introduced Hyper-V invariant TSC control feature:
- HV_X64_MSR_TSC_INVARIANT_CONTROL is not available without
HV_ACCESS_TSC_INVARIANT CPUID bit set and available with it.
- BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL controls the filtering of
architectural invariant TSC (CPUID.80000007H:EDX[8]) bit.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Test Hyper-V invariant TSC control

Add a test for the newly introduced Hyper-V invariant TSC control feature:
- HV_X64_MSR_TSC_INVARIANT_CONTROL is not available without
HV_ACCESS_TSC_INVARIANT CPUID bit set and available with it.
- BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL controls the filtering of
architectural invariant TSC (CPUID.80000007H:EDX[8]) bit.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Define and use a custom static assert in lib headers

Define and use kvm_static_assert() in the common KVM selftests headers to
provide deterministic behavior, and to allow creating static asserts
without dummy messages.

The kernel's static_assert() makes the message param optional, and on the
surface, tools/include/linux/build_bug.h appears to follow suit. However,
glibc may override static_assert() and redefine it as a direct alias of
_Static_assert(), which makes the message parameter mandatory. This leads
to non-deterministic behavior as KVM selftests code that utilizes
static_assert() without a custom message may or not compile depending on
the order of includes. E.g. recently added asserts in
x86_64/processor.h fail on some systems with errors like

In file included from lib/memstress.c:11:0:
include/x86_64/processor.h: In function ‘this_cpu_has_p’:
include/x86_64/processor.h:193:34: error: expected ‘,’ before ‘)’ token
static_assert(low_bit < high_bit); \
^
due to _Static_assert() expecting a comma before a message. The "message
optional" version of static_assert() uses macro magic to strip away the
comma when presented with empty an __VA_ARGS__

#ifndef static_assert
#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
#endif // static_assert

and effectively generates "_Static_assert(expr, #expr)".

The incompatible version of static_assert() gets defined by this snippet
in /usr/include/assert.h:

#if defined __USE_ISOC11 && !defined __cplusplus
# undef static_assert
# define static_assert _Static_assert
#endif

which yields "_Static_assert(expr)" and thus fails as above.

KVM selftests don't actually care about using C11, but __USE_ISOC11 gets
defined because of _GNU_SOURCE, which many tests do #define. _GNU_SOURCE
triggers a massive pile of defines in /usr/include/features.h, including
_ISOC11_SOURCE:

/* If _GNU_SOURCE was defined by the user, turn on all the other features. */
#ifdef _GNU_SOURCE
# undef _ISOC95_SOURCE
# define _ISOC95_SOURCE 1
# undef _ISOC99_SOURCE
# define _ISOC99_SOURCE 1
# undef _ISOC11_SOURCE
# define _ISOC11_SOURCE 1
# undef _POSIX_SOURCE
# define _POSIX_SOURCE 1
# undef _POSIX_C_SOURCE
# define _POSIX_C_SOURCE 200809L
# undef _XOPEN_SOURCE
# define _XOPEN_SOURCE 700
# undef _XOPEN_SOURCE_EXTENDED
# define _XOPEN_SOURCE_EXTENDED 1
# undef _LARGEFILE64_SOURCE
# define _LARGEFILE64_SOURCE 1
# undef _DEFAULT_SOURCE
# define _DEFAULT_SOURCE 1
# undef _ATFILE_SOURCE
# define _ATFILE_SOURCE 1
#endif

which further down in /usr/include/features.h leads to:

/* This is to enable the ISO C11 extension. */
#if (defined _ISOC11_SOURCE \
|| (defined __STDC_VERSION__ && __STDC_VERSION__ >= 201112L))
# define __USE_ISOC11 1
#endif

To make matters worse, /usr/include/assert.h doesn't guard against
multiple inclusion by turning itself into a nop, but instead #undefs a
few macros and continues on. As a result, it's all but impossible to
ensure the "message optional" version of static_assert() will actually be
used, e.g. explicitly including assert.h and #undef'ing static_assert()
doesn't work as a later inclusion of assert.h will again redefine its
version.

#ifdef _ASSERT_H

# undef _ASSERT_H
# undef assert
# undef __ASSERT_VOID_CAST

# ifdef __USE_GNU
# undef assert_perror
# endif

#endif /* assert.h */

#define _ASSERT_H 1
#include <features.h>

Fixes: fcba483e8246 ("KVM: selftests: Sanity check input to ioctls() at build time")
Fixes: ee3795536664 ("KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*")
Fixes: 53a7dc0f215e ("KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221122013309.1872347-1-seanjc@google.com

KVM: selftests: Restore assert for non-nested VMs in access tracking test

Restore the assert (on x86-64) that <10% of pages are still idle when NOT
running as a nested VM in the access tracking test. The original assert
was converted to a "warning" to avoid false failures when running the
test in a VM, but the non-nested case does not suffer from the same
"infinite TLB size" issue.

Using the HYPERVISOR flag isn't infallible as VMMs aren't strictly
required to enumerate the "feature" in CPUID, but practically speaking
anyone that is running KVM selftests in VMs is going to be using a VMM
and hypervisor that sets the HYPERVISOR flag.

Cc: David Matlack <dmatlack@google.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221129175300.4052283-3-seanjc@google.com

KVM: selftests: Verify userspace can stuff IA32_FEATURE_CONTROL at will

Verify the KVM allows userspace to set all supported bits in the
IA32_FEATURE_CONTROL MSR irrespective of the current guest CPUID, and
that all unsupported bits are rejected.

Throw the testcase into vmx_msrs_test even though it's not technically a
VMX MSR; it's close enough, and the most frequently feature controlled by
the MSR is VMX.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220607232353.3375324-4-seanjc@google.com

KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()

vmmcall()/vmcall() are used to exit from L2 to L1 and no concrete hypercall
ABI is currenty followed. With the introduction of Hyper-V L2 TLB flush
it becomes (theoretically) possible that L0 will take responsibility for
handling the call and no L1 exit will happen. Prevent this by stuffing RAX
(KVM ABI) and RCX (Hyper-V ABI) with 'safe' values.

While on it, convert vmmcall() to 'static inline', make it setup stack
frame and move to include/x86_64/svm_util.h.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-45-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Better XMM read/write helpers

set_xmm()/get_xmm() helpers are fairly useless as they only read 64 bits
from 128-bit registers. Moreover, these helpers are not used. Borrow
_kvm_read_sse_reg()/_kvm_write_sse_reg() from KVM limiting them to
XMM0-XMM8 for now.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-31-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Drop helpers for getting specific KVM supported CPUID entry

Drop kvm_get_supported_cpuid_entry() and its inner helper now that all
known usage can use X86_FEATURE_*, X86_PROPERTY_*, X86_PMU_FEATURE_*, or
the dedicated Family/Model helpers. Providing "raw" access to CPUID
leafs is undesirable as it encourages open coding CPUID checks, which is
often error prone and not self-documenting.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-13-seanjc@google.com

KVM: selftests: Add and use KVM helpers for x86 Family and Model

Add KVM variants of the x86 Family and Model helpers, and use them in the
PMU event filter test. Open code the retrieval of KVM's supported CPUID
entry 0x1.0 in anticipation of dropping kvm_get_supported_cpuid_entry().

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-12-seanjc@google.com

KVM: selftests: Add dedicated helpers for getting x86 Family and Model

Add dedicated helpers for getting x86's Family and Model, which are the
last holdouts that "need" raw access to CPUID information. FMS info is
a mess and requires not only splicing together multiple values, but
requires doing so conditional in the Family case.

Provide wrappers to reduce the odds of copy+paste errors, but mostly to
allow for the eventual removal of kvm_get_supported_cpuid_entry().

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-11-seanjc@google.com

KVM: selftests: Add PMU feature framework, use in PMU event filter test

Add an X86_PMU_FEATURE_* framework to simplify probing architectural
events on Intel PMUs, which require checking the length of a bit vector
and the _absence_ of a "feature" bit. Add helpers for both KVM and
"this CPU", and use the newfangled magic (along with X86_PROPERTY_*)
to clean up pmu_event_filter_test.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-10-seanjc@google.com

KVM: selftests: Convert vmx_pmu_caps_test to use X86_PROPERTY_*

Add X86_PROPERTY_PMU_VERSION and use it in vmx_pmu_caps_test to replace
open coded versions of the same functionality.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-9-seanjc@google.com

KVM: selftests: Convert AMX test to use X86_PROPRETY_XXX

Add and use x86 "properties" for the myriad AMX CPUID values that are
validated by the AMX test. Drop most of the test's single-usage
helpers so that the asserts more precisely capture what check failed.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-8-seanjc@google.com

KVM: selftests: Add kvm_cpu_*() support for X86_PROPERTY_*

Extent X86_PROPERTY_* support to KVM, i.e. add kvm_cpu_property() and
kvm_cpu_has_p(), and use the new helpers in kvm_get_cpu_address_width().

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-7-seanjc@google.com

KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values

Introduce X86_PROPERTY_* to allow retrieving values/properties from CPUID
leafs, e.g. MAXPHYADDR from CPUID.0x80000008. Use the same core code as
X86_FEATURE_*, the primary difference is that properties are multi-bit
values, whereas features enumerate a single bit.

Add this_cpu_has_p() to allow querying whether or not a property exists
based on the maximum leaf associated with the property, e.g. MAXPHYADDR
doesn't exist if the max leaf for 0x8000_xxxx is less than 0x8000_0008.

Use the new property infrastructure in vm_compute_max_gfn() to prove
that the code works as intended. Future patches will convert additional
selftests code.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-4-seanjc@google.com

KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*

Refactor the X86_FEATURE_* framework to prepare for extending the core
logic to support "properties". The "feature" framework allows querying a
single CPUID bit to detect the presence of a feature; the "property"
framework will extend the idea to allow querying a value, i.e. to get a
value that is a set of contiguous bits in a CPUID leaf.

Opportunistically add static asserts to ensure features are fully defined
at compile time, and to try and catch mistakes in the definition of
features.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-3-seanjc@google.com

KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR

Add X86_FEATURE_PAE and use it to guesstimate the MAXPHYADDR when the
MAXPHYADDR CPUID entry isn't supported.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-2-seanjc@google.com

KVM: selftests: Provide error code as a KVM_ASM_SAFE() output

Provide the error code on a fault in KVM_ASM_SAFE(), e.g. to allow tests
to assert that #PF generates the correct error code without needing to
manually install a #PF handler. Use r10 as the scratch register for the
error code, as it's already clobbered by the asm blob (loaded with the
RIP of the to-be-executed instruction). Deliberately load the output
"error_code" even in the non-faulting path so that error_code is always
initialized with deterministic data (the aforementioned RIP), i.e to
ensure a selftest won't end up with uninitialized consumption regardless
of how KVM_ASM_SAFE() is used.

Don't clear r10 in the non-faulting case and instead load error code with
the RIP (see above). The error code is valid if and only if an exception
occurs, and '0' isn't necessarily a better "invalid" value, e.g. '0'
could result in false passes for a buggy test.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221102184654.282799-9-dmatlack@google.com

KVM: selftests: Avoid JMP in non-faulting path of KVM_ASM_SAFE()

Clear R9 in the non-faulting path of KVM_ASM_SAFE() and fall through to
to a common load of "vector" to effectively load "vector" with '0' to
reduce the code footprint of the asm blob, to reduce the runtime overhead
of the non-faulting path (when "vector" is stored in a register), and so
that additional output constraints that are valid if and only if a fault
occur are loaded even in the non-faulting case.

A future patch will add a 64-bit output for the error code, and if its
output is not explicitly loaded with _something_, the user of the asm
blob can end up technically consuming uninitialized data. Using a
common path to load the output constraints will allow using an existing
scratch register, e.g. r10, to hold the error code in the faulting path,
while also guaranteeing the error code is initialized with deterministic
data in the non-faulting patch (r10 is loaded with the RIP of
to-be-executed instruction).

Consuming the error code when a fault doesn't occur would obviously be a
test bug, but there's no guarantee the compiler will detect uninitialized
consumption. And conversely, it's theoretically possible that the
compiler might throw a false positive on uninitialized data, e.g. if the
compiler can't determine that the non-faulting path won't touch the error
code.

Alternatively, the error code could be explicitly loaded in the
non-faulting path, but loading a 64-bit memory|register output operand
with an explicitl value requires a sign-extended "MOV imm32, r/m64",
which isn't exactly straightforward and has a largish code footprint.
And loading the error code with what is effectively garbage (from a
scratch register) avoids having to choose an arbitrary value for the
non-faulting case.

Opportunistically remove a rogue asterisk in the block comment.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221102184654.282799-8-dmatlack@google.com

KVM: selftests: Copy KVM PFERR masks into selftests

Copy KVM's macros for page fault error masks into processor.h so they
can be used in selftests.

Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221102184654.282799-7-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Play nice with huge pages when getting PTEs/GPAs

Play nice with huge pages when getting PTEs and translating GVAs to GPAs,
there's no reason to disallow using huge pages in selftests. Use
PG_LEVEL_NONE to indicate that the caller doesn't care about the mapping
level and just wants to get the pte+level.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-8-seanjc@google.com

KVM: selftests: Remove useless shifts when creating guest page tables

Remove the pointless shift from GPA=>GFN and immediately back to
GFN=>GPA when creating guest page tables. Ignore the other walkers
that have a similar pattern for the moment, they will be converted
to use virt_get_pte() in the near future.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-4-seanjc@google.com

KVM: selftests: Drop reserved bit checks from PTE accessor

Drop the reserved bit checks from the helper to retrieve a PTE, there's
very little value in sanity checking the constructed page tables as any
will quickly be noticed in the form of an unexpected #PF. The checks
also place unnecessary restrictions on the usage of the helpers, e.g. if
a test _wanted_ to set reserved bits for whatever reason.

Removing the NX check in particular allows for the removal of the @vcpu
param, which will in turn allow the helper to be reused nearly verbatim
for addr_gva2gpa().

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-3-seanjc@google.com

KVM: selftests: Drop helpers to read/write page table entries

Drop vm_{g,s}et_page_table_entry() and instead expose the "inner"
helper (was _vm_get_page_table_entry()) that returns a _pointer_ to the
PTE, i.e. let tests directly modify PTEs instead of bouncing through
helpers that just make life difficult.

Opportunsitically use BIT_ULL() in emulator_error_test, and use the
MAXPHYADDR define to set the "rogue" GPA bit instead of open coding the
same value.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-2-seanjc@google.com

KVM: selftests: move idt_entry to header

struct idt_entry will be used for a test which will break IDT on purpose.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Fix nx_huge_pages_test on TDP-disabled hosts

Map the test's huge page region with 2MiB virtual mappings when TDP is
disabled so that KVM can shadow the region with huge pages. This fixes
nx_huge_pages_test on hosts where TDP hardware support is disabled.

Purposely do not skip this test on TDP-disabled hosts. While we don't
care about NX Huge Pages on TDP-disabled hosts from a security
perspective, KVM does support it, and so we should test it.

For TDP-enabled hosts, continue mapping the region with 4KiB pages to
ensure that KVM can map it with huge pages irrespective of the guest
mappings.

Fixes: 8448ec5993be ("KVM: selftests: Add NX huge pages test")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220929181207.2281449-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE()

Change the mov in KVM_ASM_SAFE() that zeroes @vector to a movb to
make it unambiguous.

This fixes a build failure with Clang since, unlike the GNU assembler,
the LLVM integrated assembler rejects ambiguous X86 instructions that
don't have suffixes:

In file included from x86_64/hyperv_features.c:13:
include/x86_64/processor.h:825:9: error: ambiguous instructions require an explicit suffix (could be 'movb', 'movw', 'movl', or 'movq')
return kvm_asm_safe("wrmsr", "a"(val & -1u), "d"(val >> 32), "c"(msr));
^
include/x86_64/processor.h:802:15: note: expanded from macro 'kvm_asm_safe'
asm volatile(KVM_ASM_SAFE(insn) \
^
include/x86_64/processor.h:788:16: note: expanded from macro 'KVM_ASM_SAFE'
"1: " insn "\n\t" \
^
<inline asm>:5:2: note: instantiated into assembly here
mov $0, 15(%rsp)
^

It seems like this change could introduce undesirable behavior in the
future, e.g. if someone used a type larger than a u8 for @vector, since
KVM_ASM_SAFE() will only zero the bottom byte. I tried changing the type
of @vector to an int to see what would happen. GCC failed to compile due
to a size mismatch between `movb` and `%eax`. Clang succeeded in
compiling, but the generated code looked correct, so perhaps it will not
be an issue. That being said it seems like there could be a better
solution to this issue that does not assume @vector is a u8.

Fixes: 3b23054cd3f5 ("KVM: selftests: Add x86-64 support for exception fixup")
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220722234838.2160385-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang

Change KVM_EXCEPTION_MAGIC to use the all-caps "ULL", rather than lower
case. This fixes a build failure with Clang:

In file included from x86_64/hyperv_features.c:13:
include/x86_64/processor.h:825:9: error: unexpected token in argument list
return kvm_asm_safe("wrmsr", "a"(val & -1u), "d"(val >> 32), "c"(msr));
^
include/x86_64/processor.h:802:15: note: expanded from macro 'kvm_asm_safe'
asm volatile(KVM_ASM_SAFE(insn) \
^
include/x86_64/processor.h:785:2: note: expanded from macro 'KVM_ASM_SAFE'
"mov $" __stringify(KVM_EXCEPTION_MAGIC) ", %%r9\n\t" \
^
<inline asm>:1:18: note: instantiated into assembly here
mov $0xabacadabaull, %r9
^

Fixes: 3b23054cd3f5 ("KVM: selftests: Add x86-64 support for exception fixup")
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220722234838.2160385-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Verify VMX MSRs can be restored to KVM-supported values

Verify that KVM allows toggling VMX MSR bits to be "more" restrictive,
and also allows restoring each MSR to KVM's original, less restrictive
value.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Clean up requirements for XFD-aware XSAVE features

Provide informative error messages for the various checks related to
requesting access to XSAVE features that are buried behind XSAVE Feature
Disabling (XFD).

Opportunistically rename the helper to have "require" in the name so that
it's somewhat obvious that the helper may skip the test.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-41-seanjc@google.com

KVM: selftests: Check KVM's supported CPUID, not host CPUID, for XFD

Use kvm_cpu_has() to check for XFD supported in vm_xsave_req_perm(),
simply checking host CPUID doesn't guarantee KVM supports AMX/XFD.

Opportunistically hoist the check above the bit check; if XFD isn't
supported, it's far better to get a "not supported at all" message, as
opposed to a "feature X isn't supported" message".

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-39-seanjc@google.com

KVM: selftests: Inline "get max CPUID leaf" helpers

Make the "get max CPUID leaf" helpers static inline, there's no reason to
bury the one liners in processor.c.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-38-seanjc@google.com

KVM: selftests: Rename kvm_get_supported_cpuid_index() to __..._entry()

Rename kvm_get_supported_cpuid_index() to __kvm_get_supported_cpuid_entry()
to better show its relationship to kvm_get_supported_cpuid_entry(), and
because the helper returns a CPUID entry, not the index of an entry.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-37-seanjc@google.com

KVM: selftests: Use this_cpu_has() in CR4/CPUID sync test

Use this_cpu_has() to query OSXSAVE from the L1 guest in the CR4=>CPUID
sync test.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-34-seanjc@google.com

KVM: selftests: Add this_cpu_has() to query X86_FEATURE_* via cpuid()

Add this_cpu_has() to query an X86_FEATURE_* via cpuid(), i.e. to query a
feature from L1 (or L2) guest code. Arbitrarily select the AMX test to
be the first user.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-33-seanjc@google.com

KVM: selftests: Set input function/index in raw CPUID helper(s)

Set the function/index for CPUID in the helper instead of relying on the
caller to do so. In addition to reducing the risk of consuming an
uninitialized ECX, having the function/index embedded in the call makes
it easier to understand what is being checked.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-32-seanjc@google.com

KVM: selftests: Make get_supported_cpuid() returns "const"

Tag the returned CPUID pointers from kvm_get_supported_cpuid(),
kvm_get_supported_hv_cpuid(), and vcpu_get_supported_hv_cpuid() "const"
to prevent reintroducing the broken pattern of modifying the static
"cpuid" variable used by kvm_get_supported_cpuid() to cache the results
of KVM_GET_SUPPORTED_CPUID.

Update downstream consumers as needed.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-31-seanjc@google.com

KVM: selftests: Use vcpu_clear_cpuid_feature() to clear x2APIC

Add X86_FEATURE_X2APIC and use vcpu_clear_cpuid_feature() to clear x2APIC
support in the xAPIC state test.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-30-seanjc@google.com

KVM: selftests: Use vcpu_{set,clear}_cpuid_feature() in nVMX state test

Use vcpu_{set,clear}_cpuid_feature() to toggle nested VMX support in the
vCPU CPUID module in the nVMX state test. Drop CPUID_VMX as there are
no longer any users.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-29-seanjc@google.com

KVM: selftests: Use vCPU's CPUID directly in Hyper-V test

Use the vCPU's persistent CPUID array directly when manipulating the set
of exposed Hyper-V CPUID features. Drop set_cpuid() to route all future
modification through the vCPU helpers; the Hyper-V features test was the
last user.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-27-seanjc@google.com

KVM: selftests: Use vcpu_get_cpuid_entry() in PV features test (sort of)

Add a new helper, vcpu_clear_cpuid_entry(), to do a RMW operation on the
vCPU's CPUID model to clear a given CPUID entry, and use it to clear
KVM's paravirt feature instead of operating on kvm_get_supported_cpuid()'s
static "cpuid" variable. This also eliminates a user of
the soon-be-defunct set_cpuid() helper.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-26-seanjc@google.com

KVM: selftests: Add and use helper to set vCPU's CPUID maxphyaddr

Add a helper to set a vCPU's guest.MAXPHYADDR, and use it in the test
that verifies the emulator returns an error on an unknown instruction
when KVM emulates in response to an EPT violation with a GPA that is
legal in hardware but illegal with respect to the guest's MAXPHYADDR.

Add a helper even though there's only a single user at this time. Before
its removal, mmu_role_test also stuffed guest.MAXPHYADDR, and the helper
provides a small amount of clarity.

More importantly, this eliminates a set_cpuid() user and an instance of
modifying kvm_get_supported_cpuid()'s static "cpuid".

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-25-seanjc@google.com

KVM: selftests: Add helpers to get and modify a vCPU's CPUID entries

Add helpers to get a specific CPUID entry for a given vCPU, and to toggle
a specific CPUID-based feature for a vCPU. The helpers will reduce the
amount of boilerplate code needed to tweak a vCPU's CPUID model, improve
code clarity, and most importantly move tests away from modifying the
static "cpuid" returned by kvm_get_supported_cpuid().

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-23-seanjc@google.com

KVM: selftests: Use get_cpuid_entry() in kvm_get_supported_cpuid_index()

Use get_cpuid_entry() in kvm_get_supported_cpuid_index() to replace
functionally identical code.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-22-seanjc@google.com

KVM: selftests: Rename and tweak get_cpuid() to get_cpuid_entry()

Rename get_cpuid() to get_cpuid_entry() to better reflect its behavior.
Leave set_cpuid() as is to avoid unnecessary churn, that helper will soon
be removed entirely.

Oppurtunistically tweak the implementation to avoid using a temporary
variable in anticipation of taggin the input @cpuid with "const".

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-21-seanjc@google.com

KVM: selftests: Cache CPUID in struct kvm_vcpu

Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the
mess where tests, often unknowingly, modify the global/static "cpuid"
allocated by kvm_get_supported_cpuid().

Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID
model, e.g. during vCPU creation or when switching to the Hyper-V enabled
CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that
any adjustments made by KVM are always reflected in the cache. Drop
vcpu_get_cpuid() entirely to force tests to use the cache, and to allow
adding e.g. vcpu_get_cpuid_entry() in the future without creating a
conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but
vcpu_get_cpuid_entry() does not.

Opportunistically convert the VMX nested state test and KVM PV test to
manipulating the vCPU's CPUID (because it's easy), but use
vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test
to effectively retain their current behavior as they're less trivial to
convert.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-19-seanjc@google.com

KVM: selftests: Split out kvm_cpuid2_size() from allocate_kvm_cpuid2()

Split out the computation of the effective size of a kvm_cpuid2 struct
from allocate_kvm_cpuid2(), and modify both to take an arbitrary number
of entries. Future commits will add caching of a vCPU's CPUID model, and
will (a) be able to precisely size the entries array, and (b) will need
to know the effective size of the struct in order to copy to/from the
cache.

Expose the helpers so that the Hyper-V Features test can use them in the
(somewhat distant) future. The Hyper-V test very, very subtly relies on
propagating CPUID info across vCPU instances, and will need to make a
copy of the previous vCPU's CPUID information when it switches to using
the per-vCPU cache. Alternatively, KVM could provide helpers to
duplicate and/or copy a kvm_cpuid2 instance, but each is literally a
single line of code if the helpers are exposed, and it's not like the
size of kvm_cpuid2 is secret knowledge.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-18-seanjc@google.com

KVM: selftests: Use kvm_cpu_has() for nSVM soft INT injection test

Use kvm_cpu_has() to query for NRIPS support instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-16-seanjc@google.com

KVM: selftests: Use kvm_cpu_has() for KVM's PV steal time

Use kvm_cpu_has() in the stea-ltime test instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().

Opportunistically define all of KVM's paravirt CPUID-based features.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-15-seanjc@google.com

KVM: selftests: Remove the obsolete/dead MMU role test

Remove the MMU role test, which was made obsolete by KVM commit
feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN"). The
ongoing costs of keeping the test updated far outweigh any benefits,
e.g. the test _might_ be useful as an example or for documentation
purposes, but otherwise the test is dead weight.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-14-seanjc@google.com

KVM: selftests: Use kvm_cpu_has() in AMX test

Use kvm_cpu_has() in the AMX test instead of open coding equivalent
functionality using kvm_get_supported_cpuid_entry() and
kvm_get_supported_cpuid_index().

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-12-seanjc@google.com

KVM: selftests: Use kvm_cpu_has() for XSAVES in XSS MSR test

Use kvm_cpu_has() in the XSS MSR test instead of open coding equivalent
functionality using kvm_get_supported_cpuid_index().

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-10-seanjc@google.com

KVM: selftests: Use kvm_cpu_has() to query PDCM in PMU selftest

Use kvm_cpu_has() in the PMU test to query PDCM support instead of open
coding equivalent functionality using kvm_get_supported_cpuid_index().

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-8-seanjc@google.com

KVM: selftests: Use kvm_cpu_has() in the SEV migration test

Use kvm_cpu_has() in the SEV migration test instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-5-seanjc@google.com

KVM: selftests: Add framework to query KVM CPUID bits

Add X86_FEATURE_* magic in the style of KVM-Unit-Tests' implementation,
where the CPUID function, index, output register, and output bit position
are embedded in the macro value. Add kvm_cpu_has() to query KVM's
supported CPUID and use it set_sregs_test, which is the most prolific
user of manual feature querying.

Opportunstically rename calc_cr4_feature_bits() to
calc_supported_cr4_feature_bits() to better capture how the CR4 bits are
chosen.

Link: https://lore.kernel.org/all/20210422005626.564163-1-ricarkol@google.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-4-seanjc@google.com

KVM: sefltests: Use CPUID_* instead of X86_FEATURE_* for one-off usage

Rename X86_FEATURE_* macros to CPUID_* in various tests to free up the
X86_FEATURE_* names for KVM-Unit-Tests style CPUID automagic where the
function, leaf, register, and bit for the feature is embedded in its
macro value.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-3-seanjc@google.com

KVM: selftests: Use "a" and "d" to set EAX/EDX for wrmsr_safe()

Do not use GCC's "A" constraint to load EAX:EDX in wrmsr_safe(). Per
GCC's documenation on x86-specific constraints, "A" will not actually
load a 64-bit value into EAX:EDX on x86-64.

The a and d registers. This class is used for instructions that return
double word results in the ax:dx register pair. Single word values will
be allocated either in ax or dx. For example on i386 the following
implements rdtsc:

unsigned long long rdtsc (void)
{
unsigned long long tick;
__asm__ __volatile__("rdtsc":"=A"(tick));
return tick;
}

This is not correct on x86-64 as it would allocate tick in either ax or
dx. You have to use the following variant instead:

unsigned long long rdtsc (void)
{
unsigned int tickl, tickh;
__asm__ __volatile__("rdtsc":"=a"(tickl),"=d"(tickh));
return ((unsigned long long)tickh << 32)|tickl;
}

Because a u64 fits in a single 64-bit register, using "A" for selftests,
which are 64-bit only, results in GCC loading the value into either RAX
or RDX instead of splitting it across EAX:EDX.

E.g.:

kvm_exit: reason MSR_WRITE rip 0x402919 info 0 0
kvm_msr: msr_write 40000118 = 0x60000000001 (#GP)
...

With "A":

48 8b 43 08 mov 0x8(%rbx),%rax
49 b9 ba da ca ba 0a movabs $0xabacadaba,%r9
00 00 00
4c 8d 15 07 00 00 00 lea 0x7(%rip),%r10 # 402f44 <guest_msr+0x34>
4c 8d 1d 06 00 00 00 lea 0x6(%rip),%r11 # 402f4a <guest_msr+0x3a>
0f 30 wrmsr

With "a"/"d":

48 8b 53 08 mov 0x8(%rbx),%rdx
89 d0 mov %edx,%eax
48 c1 ea 20 shr $0x20,%rdx
49 b9 ba da ca ba 0a movabs $0xabacadaba,%r9
00 00 00
4c 8d 15 07 00 00 00 lea 0x7(%rip),%r10 # 402fc3 <guest_msr+0xb3>
4c 8d 1d 06 00 00 00 lea 0x6(%rip),%r11 # 402fc9 <guest_msr+0xb9>
0f 30 wrmsr

Fixes: 3b23054cd3f5 ("KVM: selftests: Add x86-64 support for exception fixup")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html#Machine-Constraints
[sean: use "& -1u", provide GCC blurb and link to documentation]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220714011115.3135828-1-seanjc@google.com

KVM: selftests: Add x86-64 support for exception fixup

Add x86-64 support for exception fixup on single instructions, without
forcing tests to install their own fault handlers. Use registers r9-r11
to flag the instruction as "safe" and pass fixup/vector information,
i.e. introduce yet another flavor of fixup (versus the kernel's in-memory
tables and KUT's per-CPU area) to take advantage of KVM sefltests being
64-bit only.

Using only registers avoids the need to allocate fixup tables, ensure
FS or GS base is valid for the guest, ensure memory is mapped into the
guest, etc..., and also reduces the potential for recursive faults due to
accessing memory.

Providing exception fixup trivializes tests that just want to verify that
an instruction faults, e.g. no need to track start/end using global
labels, no need to install a dedicated handler, etc...

Deliberately do not support #DE in exception fixup so that the fixup glue
doesn't need to account for a fault with vector == 0, i.e. the vector can
also indicate that a fault occurred. KVM injects #DE only for esoteric
emulation scenarios, i.e. there's very, very little value in testing #DE.
Force any test that wants to generate #DEs to install its own handler(s).

Use kvm_pv_test as a guinea pig for the new fixup, as it has a very
straightforward use case of wanting to verify that RDMSR and WRMSR fault.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Purge vm+vcpu_id == vcpu silliness

Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Move vm_is_unrestricted_guest() to x86-64

An "unrestricted guest" is an VMX-only concept, move the relevant helper
to x86-64 code. Assume most readers can correctly convert underscores to
spaces and oppurtunistically trim the function comment.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftest: Add proper helpers for x86-specific save/restore ioctls

Add helpers for the various one-off helpers used by x86's vCPU state
save/restore helpers, and convert the other open coded ioctl()s to use
existing helpers.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Dedup MSR index list helpers, simplify dedicated test

Consolidate the helper for retrieving the list of save/restore MSRs and
the list of feature MSRs, and use the common helpers in the related
get_msr_index_features test. Switching to the common helpers eliminates
the testcase that KVM returns the same -E2BIG result if the input number
of MSRs is '1' versus '0', but considered that testcase isn't very
interesting, e.g. '0' and '1' are equally arbitrary, and certainly not
worth the additional code.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Cache list of MSRs to save/restore

Cache the list of MSRs to save restore, mostly to justify not freeing the
list in the caller, which simplifies consumption of the list.

Opportunistically move the XSS test's so called is_supported_msr() to
common code as kvm_msr_is_in_save_restore_list(). The XSS is "supported"
by KVM, it's simply not in the save/restore list because KVM doesn't yet
allow a non-zero value.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: sefltests: Use vcpu_ioctl() and __vcpu_ioctl() helpers

Use the recently introduced vCPU-specific ioctl() helpers instead of
open coding calls to ioctl() just to pretty print the ioctl name.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: nSVM: Add svm_nested_soft_inject_test

Add a KVM self-test that checks whether a nSVM L1 is able to successfully
inject a software interrupt, a soft exception and a NMI into its L2 guest.

In practice, this tests both the next_rip field consistency and
L1-injected event with intervening L0 VMEXIT during its delivery:
the first nested VMRUN (that's also trying to inject a software interrupt)
will immediately trigger a L0 NPF.
This L0 NPF will have zero in its CPU-returned next_rip field, which if
incorrectly reused by KVM will trigger a #PF when trying to return to
such address 0 from the interrupt handler.

For NMI injection this tests whether the L1 NMI state isn't getting
incorrectly mixed with the L2 NMI state if a L1 -> L2 NMI needs to be
re-injected.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: check exact L2 RIP on first soft interrupt]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d5f3d56528558ad8e28a9f1e1e4187f5a1e6770a.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2

Add an option to dirty_log_perf_test that configures the vCPUs to run in
L2 instead of L1. This makes it possible to benchmark the dirty logging
performance of nested virtualization, which is particularly interesting
because KVM must shadow L1's EPT/NPT tables.

For now this support only works on x86_64 CPUs with VMX. Otherwise
passing -n results in the test being skipped.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h

This is a VMX-related macro so move it to vmx.h. While here, open code
the mask like the rest of the VMX bitmask macros.

No functional change intended.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Replace x86_page_size with PG_LEVEL_XX

x86_page_size is an enum used to communicate the desired page size with
which to map a range of memory. Under the hood they just encode the
desired level at which to map the page. This ends up being clunky in a
few ways:

- The name suggests it encodes the size of the page rather than the
level.
- In other places in x86_64/processor.c we just use a raw int to encode
the level.

Simplify this by adopting the kernel style of PG_LEVEL_XX enums and pass
around raw ints when referring to the level. This makes the code easier
to understand since these macros are very common in KVM MMU code.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: selftests: introduce and use more page size-related constants

Clean up code that was hardcoding masks for various fields,
now that the masks are included in processor.h.

For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux.
PAGE_SIZE in particular was defined by several tests.

Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: selftests: do not use bitfields larger than 32-bits for PTEs

Red Hat's QE team reported test failure on access_tracking_perf_test:

Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0x3fffbffff000

Populating memory : 0.684014577s
Writing to populated memory : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
lib/kvm_util.c:1411: false
pid=125806 tid=125809 errno=4 - Interrupted system call
1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
2 (inlined by) addr_gpa2hva at kvm_util.c:1405
3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
6 0x00007fefe9ff81ce: ?? ??:0
7 0x00007fefe9c64d82: ?? ??:0
No vm physical memory at 0xffbffff000

I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.

It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated. In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.

The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield. Remove the bit fields and using manual masking
instead.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <nanliu@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Define cpu_relax() helpers for s390 and x86

Add cpu_relax() for s390 and x86 for use in arch-agnostic tests. arm64
already defines its own version.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-28-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: move vm_xsave_req_perm call to amx_test

There is no need for tests other than amx_test to enable dynamic xsave
states. Remove the call to vm_xsave_req_perm from generic code,
and move it inside the test. While at it, allow customizing the bit
that is requested, so that future tests can use it differently.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: selftests: Do not indent with spaces

Some indentation with spaces crept in, likely due to terminal-based
cut and paste. Clean it up.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm/x86: Introduce x86_model()

Extract the x86 model number from CPUID.01H:EAX.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm/x86: Export x86_family() for use outside of processor.c

Move this static inline function to processor.h, so that it can be
used in individual tests, as needed.

Opportunistically replace the bare 'unsigned' with 'unsigned int.'

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm/x86: Introduce is_amd_cpu()

Replace the one ad hoc "AuthenticAMD" CPUID vendor string comparison
with a new function, is_amd_cpu().

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Test KVM_SET_CPUID2 after KVM_RUN

KVM forbids KVM_SET_CPUID2 after KVM_RUN was performed on a vCPU unless
the supplied CPUID data is equal to what was previously set. Test this.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftest: kvm: Move struct kvm_x86_state to header

Those changes can avoid dereferencing pointer compile issue
when amx_test.c reference state->xsave.

Move struct kvm_x86_state definition to processor.h.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211223145322.2914028-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: selftests: Add support for KVM_CAP_XSAVE2

When KVM_CAP_XSAVE2 is supported, userspace is expected to allocate
buffer for KVM_GET_XSAVE2 and KVM_SET_XSAVE using the size returned
by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2).

Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Guang Zeng <guang.zeng@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-20-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: KVM: Don't clobber XMM register when read

There is no need to clobber a register that is only being read from.
Oops. Drop the XMM register from the clobbers list.

Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210927223621.50178-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: KVM: Explicitly use movq to read xmm registers

Compiling the KVM selftests with clang emits the following warning:

>> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized]
>> return (unsigned long)xmm0;

where xmm0 is accessed via an uninitialized register variable.

Indeed, this is a misuse of register variables, which really should only
be used for specifying register constraints on variables passed to
inline assembly. Rather than attempting to read xmm registers via
register variables, just explicitly perform the movq from the desired
xmm register.

Fixes: 783e9e51266e ("kvm: selftests: add API testing infrastructure")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210924005147.1122357-1-oupton@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: Allows userspace to handle emulation errors.

This test exercises the feature KVM_CAP_EXIT_ON_EMULATION_FAILURE. When
enabled, errors in the in-kernel instruction emulator are forwarded to
userspace with the instruction bytes stored in the exit struct for
KVM_EXIT_INTERNAL_ERROR. So, when the guest attempts to emulate an
'flds' instruction, which isn't able to be emulated in KVM, instead
of failing, KVM sends the instruction to userspace to handle.

For this test to work properly the module parameter
'allow_smaller_maxphyaddr' has to be set.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210510144834.658457-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: sefltests: Add x86-64 test to verify MMU reacts to CPUID updates

Add an x86-only test to verify that x86's MMU reacts to CPUID updates
that impact the MMU. KVM has had multiple bugs where it fails to
reconfigure the MMU after the guest's vCPU model changes.

Sadly, this test is effectively limited to shadow paging because the
hardware page walk handler doesn't support software disabling of GBPAGES
support, and KVM doesn't manually walk the GVA->GPA on faults for
performance reasons (doing so would large defeat the benefits of TDP).

Don't require !TDP for the tests as there is still value in running the
tests with TDP, even though the tests will fail (barring KVM hacks).
E.g. KVM should not completely explode if MAXPHYADDR results in KVM using
4-level vs. 5-level paging for the guest.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add hugepage support for x86-64

Add x86-64 hugepage support in the form of a x86-only variant of
virt_pg_map() that takes an explicit page size. To keep things simple,
follow the existing logic for 4k pages and disallow creating a hugepage
if the upper-level entry is present, even if the desired pfn matches.

Opportunistically fix a double "beyond beyond" reported by checkpatch.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Hoist APIC functions out of individual tests

Move the APIC functions into the library to encourage code reuse and
to avoid unintended deviations.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-10-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Move APIC definitions into a separate file

Processor.h is a hodgepodge of definitions. Though the local APIC is
technically built into the CPU these days, move the APIC definitions
into a new header file: apic.h.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-9-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Introduce UCALL_UNHANDLED for unhandled vector reporting

x86, the only arch implementing exception handling, reports unhandled
vectors using port IO at a specific port number. This replicates what
ucall already does.

Introduce a new ucall type, UCALL_UNHANDLED, for guests to report
unhandled exceptions. Then replace the x86 unhandled vector exception
reporting to use it instead of port IO. This new ucall type will be
used in the next commits by arm64 to report unhandled vectors as well.

Tested: Forcing a page fault in the ./x86_64/xapic_ipi_test
halter_guest_code() shows this:

$ ./x86_64/xapic_ipi_test
...
Unexpected vectored event in guest (vector:0xe)

Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-4-ricarkol@google.com

KVM: selftests: Rename vm_handle_exception

Rename the vm_handle_exception function to a name that indicates more
clearly that it installs something: vm_install_exception_handler.

Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-2-ricarkol@google.com

KVM: x86: hyper-v: Make Hyper-V emulation enablement conditional

Hyper-V emulation is enabled in KVM unconditionally. This is bad at least
from security standpoint as it is an extra attack surface. Ideally, there
should be a per-VM capability explicitly enabled by VMM but currently it
is not the case and we can't mandate one without breaking backwards
compatibility. We can, however, check guest visible CPUIDs and only enable
Hyper-V emulation when "Hv#1" interface was exposed in
HYPERV_CPUID_INTERFACE.

Note, VMMs are free to act in any sequence they like, e.g. they can try
to set MSRs first and CPUIDs later so we still need to allow the host
to read/write Hyper-V specific MSRs unconditionally.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-14-vkuznets@redhat.com>
[Add selftest vcpu_set_hv_cpuid API to avoid breaking xen_vmcall_test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: Move kvm_get_supported_hv_cpuid() to common code

kvm_get_supported_hv_cpuid() may come handy in all Hyper-V related tests.
Split it off hyperv_cpuid test, create system-wide and vcpu versions.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftest: kvm: x86: test KVM_GET_CPUID2 and guest visible CPUIDs against KVM_GET_SUPPORTED_CPUID

Commit 181f494888d5 ("KVM: x86: fix CPUID entries returned by
KVM_GET_CPUID2 ioctl") revealed that we're not testing KVM_GET_CPUID2
ioctl at all. Add a test for it and also check that from inside the guest
visible CPUIDs are equal to it's output.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210129161821.74635-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm/x86: add test for pmu msr MSR_IA32_PERF_CAPABILITIES

This test will check the effect of various CPUID settings on the
MSR_IA32_PERF_CAPABILITIES MSR, check that whatever user space writes
with KVM_SET_MSR is _not_ modified from the guest and can be retrieved
with KVM_GET_MSR, and check that invalid LBR formats are rejected.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210201051039.255478-12-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Test IPI to halted vCPU in xAPIC while backing page moves

When a guest is using xAPIC KVM allocates a backing page for the required
EPT entry for the APIC access address set in the VMCS. If mm decides to
move that page the KVM mmu notifier will update the VMCS with the new
HPA. This test induces a page move to test that APIC access continues to
work correctly. It is a directed test for
commit e649b3f0188f "KVM: x86: Fix APIC page invalidation race".

Tested: ran for 1 hour on a skylake, migrating backing page every 1ms

Depends on patch "selftests: kvm: Add exception handling to selftests"
from aaronlewis@google.com that has not yet been queued.

Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20201105223823.850068-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Verify supported CR4 bits can be set before KVM_SET_CPUID2

Extend the KVM_SET_SREGS test to verify that all supported CR4 bits, as
enumerated by KVM, can be set before KVM_SET_CPUID2, i.e. without first
defining the vCPU model. KVM is supposed to skip guest CPUID checks
when host userspace is stuffing guest state.

Check the inverse as well, i.e. that KVM rejects KVM_SET_REGS if CR4
has one or more unsupported bits set.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: test enforcement of paravirtual cpuid features

Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.

Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201027231044.655110-7-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: Add exception handling to selftests

Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: Fix the segment descriptor layout to match the actual layout

Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test

vmx_tsc_adjust_test fails with:

IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is 281470681738540 (65534 * TSC_ADJUST_VALUE + 4294962476).
==== Test Assertion Failure ====
x86_64/vmx_tsc_adjust_test.c:153: false
pid=19738 tid=19738 - Interrupted system call
1 0x0000000000401192: main at vmx_tsc_adjust_test.c:153
2 0x00007fe1ef8583d4: ?? ??:0
3 0x0000000000401201: _start at ??:?
Failed guest assert: (adjust <= max)

The problem is that is 'tsc_val' should be u64, not u32 or the reading
gets truncated.

Fixes: 8d7fbf01f9afc ("KVM: selftests: VMX preemption timer migration test")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200601154726.261868-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: VMX preemption timer migration test

When a nested VM with a VMX-preemption timer is migrated, verify that the
nested VM and its parent VM observe the VMX-preemption timer exit close to
the original expiration deadline.

Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200526215107.205814-3-makarandsonare@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: KVM: Remove unused x86_register enum

x86_register enum is not used, let's remove it.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: KVM: AMD Nested test infrastructure

Add the basic infrastructure needed to test AMD nested SVM.
This is largely copied from the KVM unit test infrastructure.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: KVM: Replace get_{gdt,idt}_base() by get_{gdt,idt}()

get_gdt_base() and get_idt_base() only return the base address
of the descriptor tables. Soon we will need to get the size as well.
Change the prototype of those functions so that they return
the whole desc_ptr struct instead of the address field.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Wei Huang <wei.huang2@amd.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests, kvm: Replace manual MSR defs with common msr-index.h

The kernel's version of msr-index.h was pulled wholesale into tools by
commit

444e2ff34df8 ("tools arch x86: Grab a copy of the file containing the MSR numbers"),

Use the common msr-index.h instead of manually redefining everything in
a KVM-only header.

Note, a few MSR-related definitions remain in processor.h because they
are not covered by msr-index.h, including the awesomely named
APIC_BASE_MSR, which refers to starting index of the x2APIC MSRs, not
the actual MSR_IA32_APICBASE, which *is* defined by msr-index.h.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-3-sean.j.christopherson@intel.com

kvm: tests: Add test to verify MSR_IA32_XSS

Ensure that IA32_XSS appears in KVM_GET_MSR_INDEX_LIST if it can be set
to a non-zero value.

Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: Ia2d644f69e2d6d8c27d7e0a7a45c2bf9c42bf5ff
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: add test for dirty logging inside nested guests

Check that accesses by nested guests are logged according to the
L1 physical addresses rather than L2.

Most of the patch is really adding EPT support to the testing
framework.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Introduce VM_MODE_PXXV48_4K

The naming VM_MODE_P52V48_4K is explicit but unclear when used on
x86_64 machines, because x86_64 machines are having various physical
address width rather than some static values. Here's some examples:

- Intel Xeon E3-1220: 36 bits
- Intel Core i7-8650: 39 bits
- AMD EPYC 7251: 48 bits

All of them are using 48 bits linear address width but with totally
different physical address width (and most of the old machines should
be less than 52 bits).

Let's create a new guest mode called VM_MODE_PXXV48_4K for current
x86_64 tests and make it as the default to replace the old naming of
VM_MODE_P52V48_4K because it shows more clearly that the PA width is
not really a constant. Meanwhile we also stop assuming all the x86
machines are having 52 bits PA width but instead we fetch the real
vm->pa_bits from CPUID 0x80000008 during runtime.

We currently make this exclusively used by x86_64 but no other arch.

As a slight touch up, moving DEBUG macro from dirty_log_test.c to
kvm_util.h so lib can use it too.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482

Based on 1 normalized pattern(s):

this work is licensed under the terms of the gnu gpl version 2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 48 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tests: kvm: Check for a kernel warning

When running with /sys/module/kvm_intel/parameters/unrestricted_guest=N,
test that a kernel warning does not occur informing us that
vcpu->mmio_needed=1. This can happen when KVM_RUN is called after a
triple fault.
This test was made to detect a bug that was reported by Syzkaller
(https://groups.google.com/forum/#!topic/syzkaller/lHfau8E3SOE) and
fixed with commit bbeac2830f4de ("KVM: X86: Fix residual mmio emulation
request to userspace").

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: add a selftest for SMM

Add a simple test for SMM, based on VMX. The test implements its own
sync between the guest and the host as using our ucall library seems to
be too cumbersome: SMI handler is happening in real-address mode.

This patch also fixes KVM_SET_NESTED_STATE to happen after
KVM_SET_VCPU_EVENTS, in fact it places it last. This is because
KVM needs to know whether the processor is in SMM or not.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: selftests: tidy up kvm_util

Tidy up kvm-util code: code/comment formatting, remove unused code,
and move x86 specific code out. We also move vcpu_dump() out of
common code, because not all arches (AArch64) have KVM_GET_REGS.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: selftests: move arch-specific files to arch-specific locations

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>