#
dc54ce3e |
|
21-May-2023 |
Niklas Schnelle <schnelle@linux.ibm.com> |
usb: uhci: handle HAS_IOPORT dependencies In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to guard sections of code calling them as alternative access methods with CONFIG_HAS_IOPORT checks. For uhci-hcd there are a lot of I/O port uses that do have MMIO alternatives all selected by uhci_has_pci_registers() so this can be handled by UHCI_IN/OUT macros and making uhci_has_pci_registers() constant 0 if CONFIG_HAS_IOPORT is unset. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230522105049.1467313-38-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
0a3f82c7 |
|
02-Feb-2023 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: uhci: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230202153235.2412790-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
6690986d |
|
05-Sep-2022 |
Ard Biesheuvel <ardb@kernel.org> |
usb: clean up after dropping driver registration log spam Drop another couple of pointless pr_info() calls, and drop a number of instances of hcd_name variables that are no longer referenced now that they are no longer printed to the log at driver registration time. Fixes: 10174220f55a ("usb: reduce kernel log spam on driver registration") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220905111740.352348-1-ardb@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
5649d86f |
|
16-Feb-2021 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: host: uhci: remove dentry pointer for debugfs There is no need to keep the dentry pointer around for the created debugfs file, as it is only needed when removing it from the system. When it is to be removed, ask debugfs itself for the pointer, to save on storage and make things a bit simpler. And, no one noticed that a __maybe_unused dentry * in uhci_start() really was unused, so remove that as it's obviously not needed, and hasn't been for quite some time. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20210216144645.3813043-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
2d7a3dc3 |
|
29-May-2019 |
Laurentiu Tudor <laurentiu.tudor@nxp.com> |
USB: drop HCD_LOCAL_MEM flag With the addition of the local memory allocator, the HCD_LOCAL_MEM flag can be dropped and the checks against it replaced with a check for the localmem_pool ptr being initialized. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
750afb08 |
|
04-Jan-2019 |
Luis Chamberlain <mcgrof@kernel.org> |
cross-tree: phase out dma_zalloc_coherent() We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
37705870 |
|
29-May-2018 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: uhci: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
2b80a29b |
|
30-Dec-2017 |
Himanshu Jha <himanshujha199640@gmail.com> |
USB: host: Use zeroing memory allocator rather than allocator/memset Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
e99e88a9 |
|
16-Oct-2017 |
Kees Cook <keescook@chromium.org> |
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
5fd54ace |
|
03-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: add SPDX identifiers to all remaining files in drivers/usb/ It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
4642d34a |
|
22-May-2017 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
usb/uhci: Add support for Aspeed BMC SoCs The Aspeed 2400/2500 families have a variant of UHCI which requires some quirks to the driver to work: - The register offsets are different. We add a remapping helper. - All accesses have to be done via 32-bit loads and stores. We force all accessors to use readl/writel. This is of no consequence for reads as we never read "in the middle" of a register. For writes it also works fine as the registers only actually implement the bits we try to write (16-bit for the registers accessed with writew and 8-bit for the register accessed with writeb), so always using a 32-bit write will have no negative effect. We never do partial writes. - The resume detect interrupt is broken - The number of ports is (optionally) provided via the device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> -- v2. Remove the bulk of the #ifdef's drivers/usb/host/Kconfig | 6 ++++- drivers/usb/host/uhci-hcd.c | 17 +++++++++++--- drivers/usb/host/uhci-hcd.h | 51 ++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/uhci-platform.c | 22 ++++++++++++++++- 4 files changed, 91 insertions(+), 5 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
2c93e790 |
|
25-Feb-2017 |
yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> |
usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
7c0f6ba6 |
|
24-Dec-2016 |
Linus Torvalds <torvalds@linux-foundation.org> |
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
314e6725 |
|
25-Aug-2016 |
Wolfram Sang <wsa-dev@sang-engineering.com> |
usb: host: uhci-hcd: don't print on ENOMEM All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
f589b3e0 |
|
03-Jul-2014 |
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> |
USB: UHCI: don't allocate frame list atomically uhci_start() is executed one time during usb_add_hcd() call and by default UHCI frame list is allocated from atomic DMA pool. Do non-atomic allocation of uhci->frame and free some space in coherent atomic DMA pool. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
1c20163d |
|
18-Nov-2013 |
Oliver Neukum <oneukum@suse.de> |
usb: kill DEBUG compile option In the drivers that no longer need it, it is removed. It is removed from the Makefile. Drivers not fully converted to dynamic debug have it shifted down into the individual drivers. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
cadb3756 |
|
18-Nov-2013 |
Oliver Neukum <oneukum@suse.de> |
uhci: change dependency for debug parameter To allow a full switch to dynamic debugging make the debug parameter conditional on defined(DEBUF) || defined(CONFIG_DYNAMIC_DEBUG) Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
3171fcab |
|
23-Jan-2013 |
Chen Gang <gang.chen@asianux.com> |
USB: uhci: beautify source code get rid of the line breaks in string constants. let comments within 80 with limitation. delete ' \' at the end of a statement. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
13996ca7 |
|
23-Jan-2013 |
Chen Gang <gang.chen@asianux.com> |
USB: uhci: check buffer length to avoid memory overflow for function uhci_sprint_schedule: the buffer len is MAX_OUTPUT: 64 * 1024, which may not be enough: may loop UHCI_NUMFRAMES times (UHCI_NUMFRAMES is 1024) each time of loop may get more than 64 bytes so need check the buffer length to avoid memory overflow this patch fix it like this: at first, make enough room for buffering the exceeding contents judge the contents which written whether bigger than buffer length if bigger (the exceeding contents will be in the exceeding buffer) break current work flow, and return. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
0f815a0a |
|
22-Jan-2013 |
Alan Stern <stern@rowland.harvard.edu> |
USB: UHCI: fix IRQ race during initialization This patch (as1644) fixes a race that occurs during startup in uhci-hcd. If the IRQ line is shared with other devices, it's possible for the handler routine to be called before the data structures are fully initialized. The problem is fixed by adding a check to the IRQ handler routine. If the initialization hasn't finished yet, the routine will return immediately. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: "Huang, Adrian (ISS Linux TW)" <adrian.huang@hp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
100d4597 |
|
21-Jul-2012 |
Tony Prisk <linux@prisktech.co.nz> |
ARM: vt8500: Add support for UHCI companion controller Add support for a generic non-pci UHCI companion controller. Existing board files for arch-vt8500 updated to include UHCI support. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
9ffc93f2 |
|
28-Mar-2012 |
David Howells <dhowells@redhat.com> |
Remove all #inclusions of asm/system.h Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
|
#
2851784f |
|
13-Jan-2012 |
Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
usb/uhci: initialize sg_table properly Commit 689d6eac ("USB: UHCI: add native scatter-gather support(v1)) added sg support to uhci but forgot to set the sg_table so this feature remained unused. Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
90ab5ee9 |
|
12-Jan-2012 |
Rusty Russell <rusty@rustcorp.com.au> |
module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
#
5c12e785 |
|
26-Sep-2011 |
Alan Stern <stern@rowland.harvard.edu> |
USB: UHCI: improve comments and logic for root-hub suspend This patch (as1488) improves the comments and logic in uhci-hcd's suspend routine. The existing comments are hard to understand and don't give a good idea of what's really going on. The question of whether EGSM (Enter Global Suspend Mode) and RD (enable Resume Detect interrupts) can be useful when they're not both set is difficult. The spec doesn't give any details on how they interact with system wakeup, although clearly they are meant to be used together. To be safe, the patch changes the subroutine so that neither bit gets set unless they both do. There shouldn't be any functional changes from this; only systems that are designed badly or broken in some way need to avoid using those bits. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
51e2f62f |
|
18-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Add support for big endian descriptors This patch adds support for universal host controllers that use big endian descriptors. Support for BE descriptors requires a non-PCI host controller. For kernels with PCI-only UHCI there should be no change in behaviour. This patch tries to replicate the technique used to support BE descriptors in the EHCI HCD. Parts added to uhci-hcd.h are basically copy'n'paste from ehci.h. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
3db7739c |
|
05-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Add support for GRLIB GRUSBHC controller This patch adds support for the UHCI part of the GRLIB GRUSBHC controller found on some LEON/GRLIB SoCs. The UHCI HCD previously only supported controllers connected over PCI. This patch adds support for the first non-PCI UHCI HC. I have tried to replicate the solution used in ehci-hcd.c. Tested on GR-LEON4-ITX board (LEON4/GRLIB with GRUSBHC) and x86 with Intel UHCI HC. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
d3219d1c |
|
05-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Support non-PCI host controllers This patch is part of a series that extend the UHCI HCD to support non-PCI host controllers. This patch also extends the uhci_{read,write}* functions to allow accesses to registers not mapped into PCI I/O space. This extension also includes the addition of a void __iomem pointer to the uhci structure. A new Kconfig option is added to signal that the system has a non-PCI HC. If this Kconfig option is set, uhci-hcd.c will include generic reset functions for systems that do not make use of keyboard and mouse legacy support. PCI controllers will still always use the reset functions from pci-quirks This patch is followed by a patch that adds bus glue for the first non-PCI UHCI HC. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
9faa091a |
|
05-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Wrap I/O register accesses This patch is part of a series that extend the UHCI HCD to support non-PCI controllers. This patch replaces in{b,w,l} and out{b,wl} with calls to local inline functions. This is done so that the register access functions can be extended to support register areas not mapped in PCI I/O space. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
c31a65f8 |
|
05-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Move PCI specific functions to uhci-pci.c This patch is part of a series that extend the UHCI HCD to support non-PCI controllers. This patch moves PCI specific functions to uhci-pci.c and includes this file in uhci-hcd.c. It also renames the function uhci_init to uhci_pci_init. uhci_init/uhci_pci_init is modified so that the port-detection logic is kept in a new separate function uhci_count_ports() in uhci-hcd.c. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
e4d235d8 |
|
05-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Codingstyle fixes This patch is part of a series that extend the UHCI HCD to support non-PCI host controllers. This patch fixes the following warnings from checkpatch: ERROR: switch and case should be at the same indent + switch (to_pci_dev(uhci_dev(uhci))->vendor) { + default: [...] + case PCI_VENDOR_ID_GENESYS: [...] + case PCI_VENDOR_ID_INTEL: WARNING: static char array declaration should probably be static const char + static char bad_Asus_board[] = "A7V8X"; WARNING: Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id +static const struct pci_device_id uhci_pci_ids[] = { { Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
e7652e1e |
|
05-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Allow dynamic assignment of bus specific functions This patch is part of a series that extend the UHCI HCD to support non-PCI controllers. This patch changes calls to uhci_reset_hc, uhci_check_and_reset_hc, configure_hc, resume_detect_interrupts_are_broken and global_suspend_mode_is_broken so that they are made through pointers in the uhci hcd struct. This will allow these functions to be replaced with bus/arch specific functions. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
dfeca7a8 |
|
05-May-2011 |
Jan Andersson <jan@gaisler.com> |
USB: UHCI: Remove PCI dependencies from uhci-hub This patch is part of a series that extend the UHCI HCD to support non-PCI host controllers. uhci-hub.c contained two PCI vendor checks for silicon quirks. Move these checks into uhci-hcd.c and use bits in uhci_hcd structure to mark that we need to use the quirks. This patch is followed by other patches that will remove PCI dependencies from uhci-hcd.c as well. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
85ee7a1d |
|
23-Apr-2011 |
Joe Perches <joe@perches.com> |
treewide: cleanup continuations and remove logging message whitespace Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
99083f16 |
|
05-Apr-2011 |
Alan Stern <stern@rowland.harvard.edu> |
USB: UHCI: don't try to revive a dead controller This patch (as1457) abandons the curious strategy of declaring a controller dead following hibernation merely in order to reset and then revive it. The core no longer allow dead controllers to spring back to life when the system resumes, so there's no reason to declare a working controller temporarily dead. Instead we do an explicit reset. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
7d670a2e |
|
05-Apr-2011 |
Alan Stern <stern@rowland.harvard.edu> |
USB: UHCI: remove uses of hcd->state This patch (as1456) removes all uses of hcd->state from the uhci-hcd driver, as part of the overall strategy to eliminate hcd->state completely. Now when a controller dies we call usb_hc_died() directly, instead of relying on the core interrupt handler to see that hcd->state has changed to HC_STATE_HALT and make the call for us. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
ae0e47f0 |
|
01-Mar-2011 |
Justin P. Mattock <justinmattock@gmail.com> |
Remove one to many n's in a word Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
06125beb |
|
26-Feb-2011 |
Justin P. Mattock <justinmattock@gmail.com> |
usb: host: uhci-hcd.c Remove one to many n's in a word. The Patch below removes one to many "n's" in a word.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
ce7eb32f |
|
15-Nov-2010 |
Joe Perches <joe@perches.com> |
drivers/usb/host/uhci-hcd.c: Remove unnecessary casts of pci_get_drvdata Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
b409214c |
|
05-Aug-2010 |
Alan Stern <stern@rowland.harvard.edu> |
USB: remove fake "address-of" expressions Fake "address-of" expressions that evaluate to NULL generally confuse readers and can provoke compiler warnings. This patch (as1412) removes three such fake expressions, using "#ifdef"s in their place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
0d436b42 |
|
25-Jun-2010 |
Alan Stern <stern@rowland.harvard.edu> |
USB: UHCI: add support for Intel's wakeup flags This patch (as1396) adds code to uhci-hcd to support the vendor-specific wakeup settings found in Intel's ICHx hardware. A couple of unnecessary memory barriers are removed. And the root hub isn't put back into the "suspended" state if power was lost during a system sleep -- there's not much point in doing so because the root hub will be resumed shortly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
ee0b9be8 |
|
25-Jun-2010 |
Alan Stern <stern@rowland.harvard.edu> |
USB: controller resume should check the root hub This patch (as1394) adds code to ehci-hcd, ohci-hcd, and uhci-hcd for automatically resuming the root hub when the controller is resumed, if the root hub has a wakeup request pending on some port. During resume from system sleep this doesn't matter, because the root hubs will naturally be resumed along with every other device in the system. However it _will_ matter for runtime PM: If the controller is suspended and a remote wakeup request is received then the controller will autoresume, but we need to ensure that the root hub also autoresumes. Otherwise the wakeup request would be ignored, the controller would go back to sleep, and the cycle would repeat a large number of times (I saw this happen before the patch was written). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
4147200d |
|
25-Jun-2010 |
Alan Stern <stern@rowland.harvard.edu> |
USB: add do_wakeup parameter for PCI HCD suspend This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend method used by PCI-based host controller drivers. ehci-hcd in particular needs to know whether or not to enable wakeup when suspending a controller. Although that information is currently available through device_may_wakeup(), when support is added for runtime suspend this will no longer be true. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
541c7d43 |
|
22-Jun-2010 |
Alan Stern <stern@rowland.harvard.edu> |
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
ba297edd |
|
09-Jun-2010 |
Alan Stern <stern@rowland.harvard.edu> |
USB: UHCI: acquire spinlock before calling start_rh() This patch (as1392) fixes a bug in uhci-hcd: The start_rh() routine is supposed to be called with the private spinlock held. If an IRQ comes in at just the wrong time, the driver will think the controller has died when in fact it simply hasn't start yet. The patch also addresses some issues that may prevent an URB from being unlinked after the controller has stopped. This is an abnormal occurrence (ordinarily the controller stops only when the entire bus is suspended and hence there are no active URBs), so the pathways haven't gotten much testing. These two changes may be a little more than is strictly necessary, but clearly they won't hurt. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
27729aad |
|
24-Apr-2010 |
Eric Lescouet <Eric.Lescouet@virtuallogix.com> |
USB: make hcd.h public (drivers dependency) The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
d23356da |
|
08-Jan-2010 |
Pete Zaitcev <zaitcev@redhat.com> |
USB: fix crash in uhci_scan_schedule When hardware is removed on a Stratus, the system may crash like this: ACPI: PCI interrupt for device 0000:7c:00.1 disabled Trying to free nonexistent resource <00000000a8000000-00000000afffffff> Trying to free nonexistent resource <00000000a4800000-00000000a480ffff> uhci_hcd 0000:7e:1d.0: remove, state 1 usb usb2: USB disconnect, address 1 usb 2-1: USB disconnect, address 2 Unable to handle kernel paging request at 0000000000100100 RIP: [<ffffffff88021950>] :uhci_hcd:uhci_scan_schedule+0xa2/0x89c #4 [ffff81011de17e50] uhci_scan_schedule at ffffffff88021918 #5 [ffff81011de17ed0] uhci_irq at ffffffff88023cb8 #6 [ffff81011de17f10] usb_hcd_irq at ffffffff801f1c1f #7 [ffff81011de17f20] handle_IRQ_event at ffffffff8001123b #8 [ffff81011de17f50] __do_IRQ at ffffffff800ba749 This occurs because an interrupt scans uhci->skelqh, which is being freed. We do the right thing: disable the interrupts in the device, and do not do any processing if the interrupt is shared with other source, but it's possible that another CPU gets delayed somewhere (e.g. loops) until we started freeing. The agreed-upon solution is to wait for interrupts to play out before proceeding. No other bareers are neceesary. A backport of this patch was tested on a 2.6.18 based kernel. Testing of 2.6.32-based kernels is under way, but it takes us forever (months) to turn this around. So I think it's a good patch and we should keep it. Tracked in RH bz#516851 Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
cec3a53c |
|
08-Jan-2010 |
Alan Stern <stern@rowland.harvard.edu> |
USB: EHCI & UHCI: fix race between root-hub suspend and port resume This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
837cbb07 |
|
07-Sep-2009 |
GeunSik Lim <leemgs1@gmail.com> |
debugfs: Modified default dir of debugfs for debugging UHCI. Change default debugfs directory as mounting point for debugging UHCI(Universal Host Controller Interface driver) for USB. As we all know, We need change default directory for consistency of debugfs by Greg K-H Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
6ec4beb5 |
|
27-Apr-2009 |
Alan Stern <stern@rowland.harvard.edu> |
USB: new flag for resume-from-hibernation This patch (as1237) changes the way the PCI host controller drivers avoid retaining bogus hardware states during resume-from-hibernation. Previously we had reset the hardware as part of preparing to reinstate the memory image. But we can do better now with the new PM framework, since we know exactly which resume operations are from hibernation. The pci_resume method is changed to accept a flag indicating whether the system is resuming from hibernation. When this flag is set, the drivers will reset the hardware to get rid of any existing state. Similarly, the pci_suspend method is changed to remove the pm_message_t argument. It's no longer needed, since no special action has to be taken when preparing to reinstate the memory image. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
abb30641 |
|
27-Apr-2009 |
Alan Stern <stern@rowland.harvard.edu> |
USB: move PCI host controllers to new PM framework This patch (as1236) converts the USB PCI power management routines over to the new PM framework. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
ec20df2e |
|
24-Apr-2009 |
Greg Kroah-Hartman <gregkh@suse.de> |
USB: UHCI: use the new usb debugfs directory All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
3494252d |
|
13-Feb-2009 |
Rafael J. Wysocki <rjw@rjwysocki.net> |
USB/PCI: Fix resume breakage of controllers behind cardbus bridges If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
a15d95a0 |
|
19-Jan-2009 |
Rafael J. Wysocki <rjw@rjwysocki.net> |
USB: Fix suspend-resume of PCI USB controllers Commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 (USB: fix up suspend and resume for PCI host controllers) attempted to fix the suspend-resume of PCI USB controllers, but unfortunately it did that incorrectly and interrupts are left enabled by the USB controllers' ->suspend_late() callback as a result. This leads to serious problems during suspend which are very difficult to debug. Fix the issue by removing the ->suspend_late() callback of PCI USB controllers and moving the code from there to the ->suspend() callback executed with interrupts enabled. Additionally, make the ->resume() callback of PCI USB controllers execute pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the full power state (PCI_D0). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: "Jeff Chua" <jeff.chua.linux@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Zdenek Kabelac" <zdenek.kabelac@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
a0d4922d |
|
17-Dec-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: fix up suspend and resume for PCI host controllers This patch (as1192) rearranges the USB PCI host controller suspend and resume and resume routines: Use pci_wake_from_d3() for enabling and disabling wakeup, instead of pci_enable_wake(). Carry out the actual state change while interrupts are disabled. Change the order of the preparations to agree with the general recommendation for PCI devices, instead of messing around with the wakeup settings while the device is in D3. In .suspend: Call the underlying driver to disable IRQ generation; pci_wake_from_d3(device_may_wakeup()); pci_disable_device(); In .suspend_late: pci_save_state(); pci_set_power_state(D3hot); (for PPC_PMAC) Disable ASIC clocks In .resume_early: (for PPC_PMAC) Enable ASIC clocks pci_set_power_state(D0); pci_restore_state(); In .resume: pci_enable_device(); pci_set_master(); pci_wake_from_d3(0); Call the underlying driver to reenable IRQ generation Add the necessary .suspend_late and .resume_early method pointers to the PCI host controller drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
9beeee65 |
|
02-Oct-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
2b70f073 |
|
02-Oct-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: EHCI, OHCI, UHCI: remove version numbers This patch (as1145) removes the essentially useless driver-version strings from ehci-hcd, ohci-hcd, and uhci-hcd. It also unifies the form of the banner lines they display upon loading and adds a missing test for usb_disabled() to ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
d8f12ab5 |
|
22-Apr-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: UHCI: disable remote wakeup when it's not needed This patch (as1084b) fixes the way uhci-hcd handles polling and remote wakeups for its root hubs. When remote wakeup is disabled, neither interrupts nor polling should be enabled during a root-hub suspend. Likewise, if interrupts are enabled during suspend then polling isn't needed. Furthermore the EGSM (Enter Global Suspend Mode) bit shouldn't be set in the Command register unless remote wakeup is enabled. Apparently some controllers will issue a remote-wakeup interrupt whenever EGSM is on, even if Resume-Detect interrupts are supposedly disabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
441b62c1 |
|
03-Mar-2008 |
Harvey Harrison <harvey.harrison@gmail.com> |
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
58a97ffe |
|
13-Apr-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: HCDs use the do_remote_wakeup flag When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
7be7d741 |
|
03-Apr-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: clarify usage of hcd->suspend/resume methods The .suspend and .resume method pointers in struct usb_hcd have not been fully understood by host-controller driver writers. They are meant for use with PCI controllers; other platform-specific drivers generally should not refer to them. To try and clarify matters, this patch (as1065) renames those methods to .pci_suspend and .pci_resume. It eliminates corresponding dead code and bogus references in the ohci-ssb and u132-hcd drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
442258e2 |
|
06-Dec-2007 |
Alan Stern <stern@rowland.harvard.edu> |
USB: use IRQF_DISABLED for HCD interrupt handlers Host controller IRQs are supposed to be serviced with interrupts disabled. This patch (as1026) adds an IRQF_DISABLED flag to all the controller drivers that lack it. It also replaces the spin_lock_irqsave() and spin_unlock_irqrestore() calls in uhci_irq() with simple spin_lock() and spin_unlock(). This fixes Bugzilla #9335. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
1855256c |
|
03-Oct-2007 |
Jeff Garzik <jeff@garzik.org> |
drivers/firmware: const-ify DMI API and internals Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
#
20c2df83 |
|
19-Jul-2007 |
Paul Mundt <lethal@linux-sh.org> |
mm: Remove slab destructors from kmem_cache_create(). Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
#
cfa59dab |
|
21-Jun-2007 |
Alan Stern <stern@rowland.harvard.edu> |
USB: Don't resume root hub if the controller is suspended Root hubs can't be resumed if their parent controller device is still suspended. This patch (as925) adds a check for that condition in hcd_bus_resume() and prevents it from being treated as a fatal controller failure. ehci-hcd is updated to add the corresponding test. Unnecessary debugging messages are removed from uhci-hcd and dummy-hcd. The error return code from dummy-hcd is changed to -ESHUTDOWN, the same as the others. ohci-hcd doesn't need any changes. Suspend handling in the non-PCI host drivers is somewhat hit-and-miss. This patch shouldn't have any effect on them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
e009f1b2 |
|
19-Mar-2007 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: Fix problem caused by lack of terminating QH This patch (as871) fixes a problem introduced by an earlier change. It turns out that some systems really do need to have a terminating skeleton QH present whenever FSBR is on. I don't know any way to tell which systems do need it and which don't; the easiest answer is to have it there always. This fixes the NumLock-hang bug reported by Jiri Slaby. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
17230acd |
|
19-Feb-2007 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: Eliminate asynchronous skeleton Queue Headers This patch (as856) attempts to improve the performance of uhci-hcd by removing the asynchronous skeleton Queue Headers. They don't contain any useful information but the controller has to read through them at least once every millisecond, incurring a non-zero DMA overhead. Now all the asynchronous queues are combined, along with the period-1 interrupt queue, into a single list with a single skeleton QH. The start of the low-speed control, full-speed control, and bulk sublists is determined by linear search. Since there should rarely be more than a couple of QHs in the list, the searches should incur a much smaller total load than keeping the skeleton QHs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
28b9325e |
|
19-Feb-2007 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: Add macros for computing DMA values This patch (as855) adds some convenience macros to uhci-hcd, to help simplify the code for computing hardware DMA pointers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
cd354f1a |
|
14-Feb-2007 |
Tim Schmielau <tim@physik3.uni-rostock.de> |
[PATCH] remove many unneeded #includes of sched.h After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f3fe239b |
|
07-Jan-2007 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: improved debugging checks for the frame list This patch (as768) improves the debugging checks for the uhci-hcd frame list. The number of entries displayed is limited to 10, and the driver now checks for the correct Skeleton QH link value at the end of each chain of Isochronous TDs. The code to compute these link values is now used in two spots, so it is moved into its own separate subroutine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
25c77b32 |
|
15-Dec-2006 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: support device_may_wakeup This patch (as831) adds device_may_wakeup() support to uhci-hcd; it has been lacking for a long time. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
c80a70d5 |
|
15-Dec-2006 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: make test for ASUS motherboard more specific Instead of matching all motherboards whose name contains "A7V8X" for a remote-wakeup hardware bug, this patch (as829) matches only those boards whose name is exactly equal to "A7V8X". Later motherboards don't seem to have the bug. (In fact, it's possible that only one motherboard in the world has the bug. With only one user reporting problems, it's hard to tell.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
5f8364b7 |
|
05-Dec-2006 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: module parameter to ignore overcurrent changes Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spamming syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short-circuited cables. In addition, controllers with no devices attached will be forced to poll for new devices rather than relying on interrupts, since each overcurrent event would generate a new interrupt. This patch (as826) is essentially a copy of David Brownell's ignore_oc patch for ehci-hcd, ported to uhci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
e18b890b |
|
06-Dec-2006 |
Christoph Lameter <clameter@sgi.com> |
[PATCH] slab: remove kmem_cache_t Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
b62df451 |
|
10-Oct-2006 |
Alan Stern <stern@rowland.harvard.edu> |
UHCI: workaround for Asus motherboard This patch (as798) adds a workaround to uhci-hcd. At least one Asus motherboard is wired in such a way that any device attached to a suspended UHCI controller will prevent the system from entering suspend-to-RAM by immediately waking it up. The only way around the problem is to turn the controller off instead of suspending it. This fixes Bugzilla #6193. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
7d12e780 |
|
05-Oct-2006 |
David Howells <dhowells@redhat.com> |
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
|
#
1a1d92c1 |
|
27-Sep-2006 |
Alexey Dobriyan <adobriyan@gmail.com> |
[PATCH] Really ignore kmem_cache_destroy return value * Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
18584999 |
|
15-Aug-2006 |
David Brownell <david-b@pacbell.net> |
PM: USB HCDs use PM_EVENT_PRETHAW This teaches several USB host controller drivers to treat PRETHAW as a chip reset since the controller, and all devices connected to it, are no longer in states compatible with how the snapshotted suspend() left them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
6ab3d562 |
|
30-Jun-2006 |
Jörn Engel <joern@wohnheim.fh-wedel.de> |
Remove obsolete #include <linux/config.h> Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
c5e3b741 |
|
04-Jun-2006 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: Improve FSBR-off timing This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
e323de46 |
|
04-Jun-2006 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: remove hc_inaccessible flag This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
be3cbc5f |
|
04-Jun-2006 |
David Brownell <david-b@pacbell.net> |
[PATCH] UHCI: various updates This patch (as705) contains a small set of updates for uhci-hcd written mostly by Dave Brownell: * Root hub suspend messages come out labeled as root hub messages; PCI messages should only come out when the pci device suspends. * Rename the reset() method to better match its init() role * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub suspend/resume errors. * When an URB fails, associate the message with the usb device not the host controller (it still hides endpoint and direction) From: David Brownell <david-b@pacbell.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
c4334726 |
|
19-May-2006 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: use integer-sized frame numbers This patch (as687) changes uhci-hcd to keep track of frame numbers as full-sized integers rather than 11-bit values. This makes them a lot easier to handle and makes it possible to schedule beyond a 2-second window, should anyone ever want to do so. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
84afddd7 |
|
12-May-2006 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: Reimplement FSBR This patch (as683) re-implements Full-Speed Bandwidth Reclamation (FSBR) properly. It keeps track of which endpoint queues have advanced, and when none have advanced for a sufficiently long time, FSBR is turned off. The next TD on each of the non-moving queues is modified to generate an interrupt on completion, so that FSBR can be re-enabled as soon as the hardware starts to make some progress. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
04538a25 |
|
12-May-2006 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: Eliminate the TD-removal list This patch (as682) gets rid of the TD-removal list in uhci-hcd. It is no longer needed because now TDs are not freed until we know the hardware isn't using them. It also simplifies the code for adding and removing TDs to/from URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
c67808ee |
|
09-Apr-2006 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* defines We could use the recently added PCI_CLASS_SERIAL_USB_UHCI, PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in more places, for slightly shorter and clearer code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
8e326406 |
|
04-Apr-2006 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: UHCI: don't track suspended ports Someone recently posted a bug report where it turned out that uhci-hcd was disagreeing with the UHCI controller over whether or not a port was suspended: The driver thought it wasn't and the hardware thought it was. This patch (as665) fixes the problem and simplifies the driver by removing the internal state-tracking completely. Now the driver just asks the hardware whether a port is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
75e2df60 |
|
25-Mar-2006 |
Adrian Bunk <bunk@stusta.de> |
[PATCH] USB: pci-quirks.c: proper prototypes This patch adds a header file with proper prototypes for two functions in drivers/usb/host/pci-quirks.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
8d402e1a |
|
17-Dec-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: improve debugging code This patch (as626) makes some improvements to the debugging code in uhci-hcd. The main change is that now the code won't get compiled if CONFIG_USB_DEBUG isn't set. But there are other changes too, like adding a missing .owner field and printing a debugging dump if the controller dies. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
0ed8fee1 |
|
17-Dec-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: remove main list of URBs As part of reorienting uhci-hcd away from URBs and toward endpoint queues, this patch (as625) eliminates the driver's main list of URBs. The list wsa used mainly in checking for URB completions; now the driver goes through the list of active endpoints and checks the members of the queues. As a side effect, I had to remove the code that looks for FSBR timeouts. For now, FSBR will remain on so long as any URBs on a full-speed control or bulk queue request it, even if the queue isn't advancing. A later patch can add more intelligent handling. This isn't a huge drawback; it's pretty rare for an URB to get stuck for more than a fraction of a second. (And it will help the people trying to use those insane HP USB devices.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
dccf4a48 |
|
17-Dec-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: use one QH per endpoint, not per URB This patch (as623) changes the uhci-hcd driver to make it use one QH per device endpoint, instead of a QH per URB as it does now. Numerous areas of the code are affected by this. For example, the distinction between "queued" URBs and non-"queued" URBs no longer exists; all URBs belong to a queue and some just happen to be at the queue's head. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
687f5f34 |
|
30-Nov-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: UHCI: edit some comments This patch (as615b) edits a large number of comments in the uhci-hcd code, mainly removing excess apostrophes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
fa346568 |
|
30-Nov-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: UHCI: change uhci_explen macro This patch (as616) changed the uhci_explen macro in uhci-hcd.h so that it now accepts the desired length, rather than length - 1 with special handling for 0. This also fixes a minor bug that would show up only when a driver submits a 0-length bulk URB. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
1c50c317 |
|
14-Nov-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: central handling for host controllers that were reset during suspend/resume This patch (as515b) adds a routine to usbcore to simplify handling of host controllers that lost power or were reset during suspend/resume. The new core routine marks all the child devices of the root hub as NOTATTACHED and tells khubd to disconnect the device structures as soon as possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
c9a50cc9 |
|
07-Nov-2005 |
David Brownell <david-b@pacbell.net> |
[PATCH] USB: hcd uses EXTRA_CFLAGS for -DDEBUG This modifies the HCD builds to automatically "-DDEBUG" if CONFIG_USB_DEBUG is selected. It's just a minor source code cleanup, guaranteeing consistency. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
baefbc39 |
|
07-Nov-2005 |
David Brownell <david-b@pacbell.net> |
[PATCH] USB: wakeup flag updates (2/3) uhci-hcd This makes UHCI stop using the HCD glue wakeup flags to report whether the controller can wake the system. The existing code was wrong anyway; having a PCI PM capability doesn't imply it reports PME# is supported. I skimmed Intel's ICH7 datasheet and that basically says the wakeup signaling gets routed only through ACPI registers. (On the other hand, many VIA chips provide the PCI PM capabilities...) I think that doing this correctly with UHCI is going to require the ACPI folk to associate the /proc/acpi/wakeup identifiers (and wakeup enable/disable flags) with the relevant /sys/devices/pci*/... devices. From: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
42245e65 |
|
16-Dec-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: add missing memory barriers This patch (as617) adds a couple of memory barriers that Ben H. forgot in his recent suspend/resume fix. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
8de98402 |
|
24-Nov-2005 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[PATCH] USB: Fix USB suspend/resume crasher (#2) This patch closes the IRQ race and makes various other OHCI & EHCI code path safer vs. suspend/resume. I've been able to (finally !) successfully suspend and resume various Mac models, with or without USB mouse plugged, or plugging while asleep, or unplugging while asleep etc... all without a crash. Alan, please verify the UHCI bit I did, I only verified that it builds. It's very simple so I wouldn't expect any issue there. If you aren't confident, then just drop the hunks that change uhci-hcd.c I also made the patch a little bit more "safer" by making sure the store to the interrupt register that disables interrupts is not posted before I set the flag and drop the spinlock. Without this patch, you cannot reliably sleep/wakeup any recent Mac, and I suspect PCs have some more sneaky issues too (they don't frankly crash with machine checks because x86 tend to silently swallow PCI errors but that won't last afaik, at least PCI Express will blow up in those situations, but the USB code may still misbehave). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
249bb070 |
|
04-Nov-2005 |
Greg Kroah-Hartman <gregkh@suse.de> |
[PATCH] PCI: removed unneeded .owner field from struct pci_driver Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
efa400db |
|
09-Oct-2005 |
Ben Dooks <ben@fluff.org.uk> |
[PATCH] USB: add owner initialisation to host drivers Add .owner initialisation to the device drivers in drivers/usb/host so that when built as module the device_driver refers to the owning module Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
f37be9b9 |
|
17-Oct-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] Fix hcd->state assignments in uhci-hcd This patch (as581) changes the assignments to hcd->state in the uhci-hcd driver. It fixes part of bugzilla entry #5227. The problem was revealed by David's large suite of USB suspend/resume patches; this patch should go to Linus at the same time those do. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
0c0382e3 |
|
13-Oct-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
bb200f6e |
|
03-Oct-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: unify BIOS handoff and driver reset code This patch (as574) updates the PCI BIOS usb-handoff code for UHCI controllers, making it work like the reset routines in uhci-hcd. This allows uhci-hcd to drop its own routines in favor of the new ones (code-sharing). Once the patch is merged we can turn the usb-handoff option on permanently, as far as UHCI is concerned. OHCI and EHCI may still have some issues. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
a7f72abe |
|
22-Sep-2005 |
David Brownell <david-b@pacbell.net> |
[PATCH] UHCI PM updates This removes suspend and resume path recursion in UHCI. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/uhci-hcd.c | 9 --------- 1 file changed, 9 deletions(-)
|
#
a1d59ce8 |
|
16-Sep-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: UHCI: Split apart the physical and logical framelist arrays This patch (as563) splits the physical and logical framelist arrays in uhci-hcd into two separate pieces. This will allow slightly better memory utilization, since each piece is no larger than a single page whereas before the whole thing was a little bigger than two pages. It also allows the logical array to be allocated in non-DMA-coherent memory. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
8b4cd421 |
|
16-Sep-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: UHCI: Remove unused fields and unneeded tests for NULL This patch (as562) removes from the uhci-hcd driver a few unused fields and some unnecessary tests against NULL and assignments to NULL. In fact it wasn't until fairly recently that the tests became unnecessary. Before last winter it was possible that the driver's stop() routine would get called even if the start() routine returned an error, but now that can't happen. Hence there's no longer any need to check for partial initialization. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
1f09df8b |
|
05-Sep-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: remove the FSBR kernel timer This patch (as558) removes from the UHCI driver a kernel timer used for checking Full Speed Bandwidth Reclamation (FSBR). The checking can be done during normal root-hub polling; it doesn't need a separate timer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
e07fefa6 |
|
31-May-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: Detect invalid ports This patch changes the way uhci-hcd detects valid ports. The specification doesn't mention any way to find out how many ports a controller has, so the driver has to use some heuristics, reading the port status and control register and deciding whether the value makes sense. With this patch the driver will recognize a typical failure mode (all bits set to one) for nonexistent ports and won't assume there are always at least 2 ports -- such an assumption seems silly if the heuristics have already shown that the ports don't exist. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
247f3105 |
|
25-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB HCDs: no longer need to register root hub This patch changes the host controller drivers; they no longer need to register their root hubs because usbcore will take care of it for them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
2532178a |
|
25-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] UHCI: Don't store device pointer in QH or TD This patch simplifies the uhci-hcd driver by removing the device pointer currently stored in the QH and TD structures. Those pointers weren't being used for anything other than to increment the device's reference count, which is unnecessary since the device is used only when an URB completes, and outstanding URBs take their own reference to the device. As a useful side effect, this change means that uhci-hcd no longer needs to have the root-hub device available in the start routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
02597d2d |
|
28-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: Add shutdown method After all the discussion you might not be interested in this still, but nevertheless here it is. This patch adds a shutdown method to the uhci-hcd driver. Its prerequisite is the patch you wrote adding shutdown support for PCI. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
c074b416 |
|
22-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: improved reset handling This patch improves the strategy uhci-hcd uses for performing controller resets and checking whether they are needed. The HCRESET command doesn't affect the Suspend, Resume, or Reset bits in the port status & control registers, so the driver must clear them by itself. This means the code to figure out how many ports there are has to be moved to an earlier spot in the driver. The R/WC bits in the USBLEGSUP register can be set by the hardware even in the absence of BIOS meddling with legacy support features. Hence it's not a good idea to check them while trying to determine whether the BIOS has altered the controller's state. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
6c1b445c |
|
21-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: Use root-hub IRQs while suspended This patch, which has as478b as a prerequisite, enables the uhci-hcd driver to take advantage of root-hub IRQs rather than polling during the time it is suspended. (Unfortunately the hardware doesn't support port-change interrupts while the controller is running.) It also turns off the driver's private timer while the controller is suspended, as it isn't needed then. The combined elimination of polling interrupts and timer interrupts ought to be enough to allow some systems to save a noticeable amount of power while they are otherwise idle. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
4daaa87c |
|
09-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: Fix up loose ends This patch tidies up a few loose ends left by the preceding patches. It indicates the controller supports remote wakeup whenever the PM capability is present -- which shouldn't cause any harm if the assumption turns out to be wrong. It refuses to suspend the controller if the root hub is still active, and it refuses to resume the root hub if the controller is suspended. It adds checks for a dead controller in several spots, and it adds memory barriers as needed to insure that I/O operations are completed before moving on. Actually I'm not certain the last part is being done correctly. With code like this: outw(..., ...); mb(); udelay(5); do we know for certain that the outw() will complete _before_ the delay begins? If not, how should this be written? Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
a8bed8b6 |
|
09-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: Add root-hub suspend/resume support This patch implements (finally!) separate suspend and resume routines for the root hub and the controller in the UHCI driver. It also changes the sequence used to reset the controller during initial probing, so as to preserve the existing state during a Resume-From-Disk. (This new sequence is what should be used in the PCI Quirks code for early USB handoffs, incidentally.) Lastly it adds a notion of the controller being "inaccessible" while in a PCI low-power state, when normal I/O operations shouldn't be allowed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
c8f4fe43 |
|
09-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: Add root hub states This patch starts making some serious changes to the UHCI driver. There's a set of private states for the root hub, and the internal routines for suspending and resuming work completely differently, with transitions based on the new states. Now the driver distinguishes between a privately auto-stopped state and a publicly suspended state, and it will properly suspend controllers with broken resume-detect interrupts instead of resetting them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
f5946f82 |
|
09-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: Minor improvements This patch makes a few small improvements in the UHCI driver. Some code is moved between different source files and a more useful pointer is passed to a callback routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
014e73c9 |
|
09-Apr-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB UHCI: subroutine reordering This patch moves a few subroutines around in the uhci-hcd source file. Nothing else is changed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
1bc3c9e1 |
|
18-Apr-2005 |
Jesper Juhl <juhl-lkml@dif.dk> |
[PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*, there's no need to check a pointer for NULL before calling kfree() on it. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/class/audio.c ===================================================================
|
#
9a5d3e98 |
|
18-Apr-2005 |
David Brownell <david-b@pacbell.net> |
[PATCH] USB: hcd suspend uses pm_message_t This patch includes minor "sparse -Wbitwise" updates for the PCI based HCDs. Almost all of them involve just changing the second parameter of the suspend() method to a pm_message_t ... the others relate to how the EHCI code walks in-memory data structures. (There's a minor bug fixed there too ... affecting the big-endian sysfs async schedule dump.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/hcd.h ===================================================================
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|