KVM: nVMX: Introduce helpers to check if Hyper-V evmptr12 is valid/set

In order to get rid of raw 'vmx->nested.hv_evmcs_vmptr' accesses when
!CONFIG_KVM_HYPERV, introduce a pair of helpers:

nested_vmx_is_evmptr12_valid() to check that eVMPTR points to a valid
address.

nested_vmx_is_evmptr12_valid() to check that eVMPTR either points to a
valid address or is in 'pending' port-migration state (meaning it is
supposed to be valid but the exact address wasn't acquired from guest's
memory yet).

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-14-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: VMX: Split off hyperv_evmcs.{ch}

Some Enlightened VMCS related code is needed both by Hyper-V on KVM and
KVM on Hyper-V. As a preparation to making Hyper-V emulation optional,
create dedicated 'hyperv_evmcs.{ch}' files which are used by both.

No functional change intended.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-7-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: VMX: Rename XSAVES control to follow KVM's preferred "ENABLE_XYZ"

Rename the XSAVES secondary execution control to follow KVM's preferred
style so that XSAVES related logic can use common macros that depend on
KVM's preferred style.

No functional change intended.

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230815203653.519297-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: nVMX: Reword comments about generating nested CR0/4 read shadows

Reword the comments that (attempt to) document nVMX's overrides of the
CR0/4 read shadows for L2 after calling vmx_set_cr0/4(). The important
behavior that needs to be documented is that KVM needs to override the
shadows to account for L1's masks even though the shadows are set by the
common helpers (and that setting the shadows first would result in the
correct shadows being clobbered).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20220831000721.4066617-1-seanjc@google.com

KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs

Using raw host MSR values for setting up nested VMX control MSRs is
incorrect as some features need to disabled, e.g. when KVM runs as
a nested hypervisor on Hyper-V and uses Enlightened VMCS or when a
workaround for IA32_PERF_GLOBAL_CTRL is applied. For non-nested VMX, this
is done in setup_vmcs_config() and the result is stored in vmcs_config.
Use it for setting up allowed-1 bits in nested VMX MSRs too.

Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-32-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert "KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL VM-{Entry,Exit} control"

This reverts commit 03a8871add95213827e2bea84c12133ae5df952e.

Since commit 03a8871add95 ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL
VM-{Entry,Exit} control"), KVM has taken ownership of the "load
IA32_PERF_GLOBAL_CTRL" VMX entry/exit control bits, trying to set these
bits in the IA32_VMX_TRUE_{ENTRY,EXIT}_CTLS MSRs if the guest's CPUID
supports the architectural PMU (CPUID[EAX=0Ah].EAX[7:0]=1), and clear
otherwise.

This was a misguided attempt at mimicking what commit 5f76f6f5ff96
("KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled",
2018-10-01) did for MPX. However, that commit was a workaround for
another KVM bug and not something that should be imitated. Mucking with
the VMX MSRs creates a subtle, difficult to maintain ABI as KVM must
ensure that any internal changes, e.g. to how KVM handles _any_ guest
CPUID changes, yield the same functional result. Therefore, KVM's policy
is to let userspace have full control of the guest vCPU model so long
as the host kernel is not at risk.

Now that KVM really truly ensures kvm_set_msr() will succeed by loading
PERF_GLOBAL_CTRL if and only if it exists, revert KVM's misguided and
roundabout behavior.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: make it a pure revert]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220722224409.1336532-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Account for KVM reserved CR4 bits in consistency checks

Check that the guest (L2) and host (L1) CR4 values that would be loaded
by nested VM-Enter and VM-Exit respectively are valid with respect to
KVM's (L0 host) allowed CR4 bits. Failure to check KVM reserved bits
would allow L1 to load an illegal CR4 (or trigger hardware VM-Fail or
failed VM-Entry) by massaging guest CPUID to allow features that are not
supported by KVM. Amusingly, KVM itself is an accomplice in its doom, as
KVM adjusts L1's MSR_IA32_VMX_CR4_FIXED1 to allow L1 to enable bits for
L2 based on L1's CPUID model.

Note, although nested_{guest,host}_cr4_valid() are _currently_ used if
and only if the vCPU is post-VMXON (nested.vmxon == true), that may not
be true in the future, e.g. emulating VMXON has a bug where it doesn't
check the allowed/required CR0/CR4 bits.

Cc: stable@vger.kernel.org
Fixes: 3899152ccbf4 ("KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Refactor PMU refresh to avoid referencing kvm_x86_ops.pmu_ops

Refactor the nested VMX PMU refresh helper to pass it a flag stating
whether or not the vCPU has PERF_GLOBAL_CTRL instead of having the nVMX
helper query the information by bouncing through kvm_x86_ops.pmu_ops.
This will allow a future patch to use static_call() for the PMU ops
without having to export any static call definitions from common x86, and
it is also a step toward unexported kvm_x86_ops.

Alternatively, nVMX could call kvm_pmu_is_valid_msr() to indirectly use
kvm_x86_ops.pmu_ops, but that would incur an extra layer of indirection
and would require exporting kvm_pmu_is_valid_msr().

Opportunistically rename the helper to keep line lengths somewhat
reasonable, and to better capture its high-level role.

No functional change intended.

Cc: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Introduce 'EVMPTR_MAP_PENDING' post-migration state

Unlike regular set_current_vmptr(), nested_vmx_handle_enlightened_vmptrld()
can not be called directly from vmx_set_nested_state() as KVM may not have
all the information yet (e.g. HV_X64_MSR_VP_ASSIST_PAGE MSR may not be
restored yet). Enlightened VMCS is mapped later while getting nested state
pages. In the meantime, vmx->nested.hv_evmcs_vmptr remains 'EVMPTR_INVALID'
and it's indistinguishable from 'evmcs is not in use' case. This leads to
certain issues, in particular, if KVM_GET_NESTED_STATE is called right
after KVM_SET_NESTED_STATE, KVM_STATE_NESTED_EVMCS flag in the resulting
state will be unset (and such state will later fail to load).

Introduce 'EVMPTR_MAP_PENDING' state to detect not-yet-mapped eVMCS after
restore. With this, the 'is_guest_mode(vcpu)' hack in vmx_has_valid_vmcs12()
is no longer needed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Use '-1' in 'hv_evmcs_vmptr' to indicate that eVMCS is not in use

Instead of checking 'vmx->nested.hv_evmcs' use '-1' in
'vmx->nested.hv_evmcs_vmptr' to indicate 'evmcs is not in use' state. This
matches how we check 'vmx->nested.current_vmptr'. Introduce EVMPTR_INVALID
and evmptr_is_valid() and use it instead of raw '-1' check as a preparation
to adding other 'special' values.

No functional change intended.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: VMX: Enable SGX virtualization for SGX1, SGX2 and LC

Enable SGX virtualization now that KVM has the VM-Exit handlers needed
to trap-and-execute ENCLS to ensure correctness and/or enforce the CPU
model exposed to the guest. Add a KVM module param, "sgx", to allow an
admin to disable SGX virtualization independent of the kernel.

When supported in hardware and the kernel, advertise SGX1, SGX2 and SGX
LC to userspace via CPUID and wire up the ENCLS_EXITING bitmap based on
the guest's SGX capabilities, i.e. to allow ENCLS to be executed in an
SGX-enabled guest. With the exception of the provision key, all SGX
attribute bits may be exposed to the guest. Guest access to the
provision key, which is controlled via securityfs, will be added in a
future patch.

Note, KVM does not yet support exposing ENCLS_C leafs or ENCLV leafs.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <a99e9c23310c79f2f4175c1af4c4cbcef913c3e5.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE

A missing VMCS12 was not causing -EINVAL (it was just read with
copy_from_user, so it is not a security issue, but it is still
wrong). Test for VMCS12 validity and reject the nested state
if a VMCS12 is required but not present.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Remove unused 'ops' param from nested_vmx_hardware_setup()

Remove a 'struct kvm_x86_ops' param that got left behind when the nested
ops were moved to their own struct.

Fixes: 33b22172452f0 ("KVM: x86: move nested-related kvm_x86_ops to a separate struct")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200506204653.14683-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Report NMIs as allowed when in L2 and Exit-on-NMI is set

Report NMIs as allowed when the vCPU is in L2 and L2 is being run with
Exit-on-NMI enabled, as NMIs are always unblocked from L1's perspective
in this case.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: move nested-related kvm_x86_ops to a separate struct

Clean up some of the patching of kvm_x86_ops, by moving kvm_x86_ops related to
nested virtualization into a separate struct.

As a result, these ops will always be non-NULL on VMX. This is not a problem:

* check_nested_events is only called if is_guest_mode(vcpu) returns true

* get_nested_state treats VMXOFF state the same as nested being disabled

* set_nested_state fails if you attempt to set nested state while
nesting is disabled

* nested_enable_evmcs could already be called on a CPU without VMX enabled
in CPUID.

* nested_get_evmcs_version was fixed in the previous patch

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Rename exit_reason to vm_exit_reason for nested VM-Exit

Use "vm_exit_reason" for code related to injecting a nested VM-Exit to
VM-Exits to make it clear that nested_vmx_vmexit() expects the full exit
eason, not just the basic exit reason. The basic exit reason (bits 15:0
of vmcs.VM_EXIT_REASON) is colloquially referred to as simply "exit
reason".

Note, other flows, e.g. vmx_handle_exit(), are intentionally left as is.
A future patch will convert vmx->exit_reason to a union + bit-field, and
the exempted flows will interact with the unionized of "exit_reason".

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Pull exit_reason from vcpu_vmx in nested_vmx_reflect_vmexit()

Grab the exit reason from the vcpu struct in nested_vmx_reflect_vmexit()
instead of having the exit reason explicitly passed from the caller.
This fixes a discrepancy between VM-Fail and VM-Exit handling, as the
VM-Fail case is already handled by checking vcpu_vmx, e.g. the exit
reason previously passed on the stack is bogus if vmx->fail is set.

Not taking the exit reason on the stack also avoids having to document
that nested_vmx_reflect_vmexit() requires the full exit reason, as
opposed to just the basic exit reason, which is not at all obvious since
the only usages of the full exit reason are for tracing and way down in
prepare_vmcs12() where it's propagated to vmcs12.

No functional change intended.

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Uninline nested_vmx_reflect_vmexit(), i.e. move it to nested.c

Uninline nested_vmx_reflect_vmexit() in preparation of refactoring
nested_vmx_exit_reflected() to split up the reflection logic into more
consumable chunks, e.g. VM-Fail vs. L1 wants the exit vs. L0 always
handles the exit.

No functional change intended.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Move reflection check into nested_vmx_reflect_vmexit()

Move the call to nested_vmx_exit_reflected() from vmx_handle_exit() into
nested_vmx_reflect_vmexit() and change the semantics of the return value
for nested_vmx_reflect_vmexit() to indicate whether or not the exit was
reflected into L1. nested_vmx_exit_reflected() and
nested_vmx_reflect_vmexit() are intrinsically tied together, calling one
without simultaneously calling the other makes little sense.

No functional change intended.

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Move nested_get_vpid02() to vmx/nested.h

Move nested_get_vpid02() to vmx/nested.h so that a future patch can
reference it from vmx.c to implement context-specific TLB flushing.

No functional change intended.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-20-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: VMX: Configure runtime hooks using vmx_x86_ops

Configure VMX's runtime hooks by modifying vmx_x86_ops directly instead
of using the global kvm_x86_ops. This sets the stage for waiting until
after ->hardware_setup() to set kvm_x86_ops with the vendor's
implementation.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-5-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: remove side effects from nested_vmx_exit_reflected

The name of nested_vmx_exit_reflected suggests that it's purely
a test, but it actually marks VMCS12 pages as dirty. Move this to
vmx_handle_exit, observing that the initial nested_run_pending check in
nested_vmx_exit_reflected is pointless---nested_run_pending has just
been cleared in vmx_vcpu_run and won't be set until handle_vmlaunch
or handle_vmresume.

Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Rename nested_ept_get_cr3() to nested_ept_get_eptp()

Rename the accessor for vmcs12.EPTP to use "eptp" instead of "cr3". The
accessor has no relation to cr3 whatsoever, other than it being assigned
to the also poorly named kvm_mmu->get_cr3() hook.

No functional change intended.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Refactor IO bitmap checks into helper function

Checks against the IO bitmap are useful for both instruction emulation
and VM-exit reflection. Refactor the IO bitmap checks into a helper
function.

Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Emulate MTF when performing instruction emulation

Since commit 5f3d45e7f282 ("kvm/x86: add support for
MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap
flag processor-based execution control for its L2 guest. KVM simply
forwards any MTF VM-exits to the L1 guest, which works for normal
instruction execution.

However, when KVM needs to emulate an instruction on the behalf of an L2
guest, the monitor trap flag is not emulated. Add the necessary logic to
kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon
instruction emulation for L2.

Fixes: 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled

When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*),
nothing happens to VMX MSRs on the already existing vCPUs, however, all new
ones are created with PIN_BASED_POSTED_INTR filtered out. This is very
confusing and results in the following picture inside the guest:

$ rdmsr -ax 0x48d
ff00000016
7f00000016
7f00000016
7f00000016

This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does
KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three.

L1 hypervisor may only check CPU0's controls to find out what features
are available and it will be very confused later. Switch to setting
PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: mark functions in the header as "static inline"

Correct a small inaccuracy in the shattering of vmx.c, which becomes
visible now that pmu_intel.c includes nested.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL VM-{Entry,Exit} control

The "load IA32_PERF_GLOBAL_CTRL" bit for VM-entry and VM-exit should
only be exposed to the guest if IA32_PERF_GLOBAL_CTRL is a valid MSR.
Create a new helper to allow pmu_refresh() to update the VM-Entry and
VM-Exit controls to ensure PMU values are initialized when performing
the is_valid_msr() check.

Suggested-by: Jim Mattson <jmattson@google.com>
Co-developed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Don't leak L1 MMIO regions to L2

If the "virtualize APIC accesses" VM-execution control is set in the
VMCS, the APIC virtualization hardware is triggered when a page walk
in VMX non-root mode terminates at a PTE wherein the address of the 4k
page frame matches the APIC-access address specified in the VMCS. On
hardware, the APIC-access address may be any valid 4k-aligned physical
address.

KVM's nVMX implementation enforces the additional constraint that the
APIC-access address specified in the vmcs12 must be backed by
a "struct page" in L1. If not, L0 will simply clear the "virtualize
APIC accesses" VM-execution control in the vmcs02.

The problem with this approach is that the L1 guest has arranged the
vmcs12 EPT tables--or shadow page tables, if the "enable EPT"
VM-execution control is clear in the vmcs12--so that the L2 guest
physical address(es)--or L2 guest linear address(es)--that reference
the L2 APIC map to the APIC-access address specified in the
vmcs12. Without the "virtualize APIC accesses" VM-execution control in
the vmcs02, the APIC accesses in the L2 guest will directly access the
APIC-access page in L1.

When there is no mapping whatsoever for the APIC-access address in L1,
the L2 VM just loses the intended APIC virtualization. However, when
the APIC-access address is mapped to an MMIO region in L1, the L2
guest gets direct access to the L1 MMIO device. For example, if the
APIC-access address specified in the vmcs12 is 0xfee00000, then L2
gets direct access to L1's APIC.

Since this vmcs12 configuration is something that KVM cannot
faithfully emulate, the appropriate response is to exit to userspace
with KVM_INTERNAL_ERROR_EMULATION.

Fixes: fe3ef05c7572 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12")
Reported-by: Dan Cross <dcross@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: VMX: Rename {vmx,nested_vmx}_vcpu_setup()

Rename {vmx,nested_vmx}_vcpu_setup() to match what they really do.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Use descriptive names for VMCS sync functions and flags

Nested virtualization involves copying data between many different types
of VMCSes, e.g. vmcs02, vmcs12, shadow VMCS and eVMCS. Rename a variety
of functions and flags to document both the source and destination of
each sync.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: vmx: segment limit check: use access length

There is an imperfection in get_vmx_mem_address(): access length is ignored
when checking the limit. To fix this, pass access length as a function argument.
The access length is usually obvious since it is used by callers after
get_vmx_mem_address() call, but for vmread/vmwrite it depends on the
state of 64-bit mode.

Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Move nested code to dedicated files

From a functional perspective, this is (supposed to be) a straight
copy-paste of code. Code was moved piecemeal to nested.c as not all
code that could/should be moved was obviously nested-only. The nested
code was then re-ordered as needed to compile, i.e. stats may not show
this is being a "pure" move despite there not being any intended changes
in functionality.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>