powerpc: Support execute-only on all powerpc

Introduce PAGE_EXECONLY_X macro which provides exec-only rights.
The _X may be seen as redundant with the EXECONLY but it helps
keep consistency, all macros having the EXEC right have _X.

And put it next to PAGE_NONE as PAGE_EXECONLY_X is
somehow PAGE_NONE + EXEC just like all other SOMETHING_X are
just SOMETHING + EXEC.

On book3s/64 PAGE_EXECONLY becomes PAGE_READONLY_X.

On book3s/64, as PAGE_EXECONLY is only valid for Radix add
VM_READ flag in vm_get_page_prot() for non-Radix.

And update access_error() so that a non exec fault on a VM_EXEC only
mapping is always invalid, even when the underlying layer don't
always generate a fault for that.

For 8xx, set PAGE_EXECONLY_X as _PAGE_NA | _PAGE_EXEC.
For others, only set it as just _PAGE_EXEC

With that change, 8xx, e500 and 44x fully honor execute-only
protection.

On 40x that is a partial implementation of execute-only. The
implementation won't be complete because once a TLB has been loaded
via the Instruction TLB miss handler, it will be possible to read
the page. But at least it can't be read unless it is executed first.

On 603 MMU, TLB missed are handled by SW and there are separate
DTLB and ITLB. Execute-only is therefore now supported by not loading
DTLB when read access is not permitted.

On hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/4283ea9cbef9ff2fbee468904800e1962bc8fc18.1695659959.git.christophe.leroy@csgroup.eu

powerpc/32s: Introduce _PAGE_READ and remove _PAGE_USER

On 603 MMU, TLB missed are handled by SW and there are separated
DTLB and ITLB. It is therefore possible to implement execute-only
protection by not loading DTLB when read access is not permitted.

To do that, _PAGE_READ flag is needed but there is no bit available
for it in PTE. On the other hand the only real use of _PAGE_USER is
to implement PAGE_NONE by clearing _PAGE_USER.

As _PAGE_NONE can also be implemented by clearing _PAGE_READ, remove
_PAGE_USER and add _PAGE_READ. Then use the virtual address to know
whether user rights or kernel rights are to be used.

With that change, 603 MMU now honors execute-only protection.

For hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b7702dd5a041ec59055ed2880f4952e94c087a2e.1695659959.git.christophe.leroy@csgroup.eu

powerpc/32s: Add _PAGE_WRITE to supplement _PAGE_RW

Several places, _PAGE_RW maps to write permission and don't
always imply read. To make it more clear, do as book3s/64 in
commit c7d54842deb1 ("powerpc/mm: Use _PAGE_READ to indicate
Read access") and use _PAGE_WRITE when more relevant.

For the time being _PAGE_WRITE is equivalent to _PAGE_RW but that
will change when _PAGE_READ gets added in following patches.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5798782869fe4d2698f104948dabd17657b89395.1695659959.git.christophe.leroy@csgroup.eu

powerpc: Remove pte_mkuser() and pte_mkpriviledged()

pte_mkuser() is never used. Remove it.

pte_mkpriviledged() is not used anymore. Remove it too.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1a1dc18816456c637dc8a9c38d532f7598b60ac4.1695659959.git.christophe.leroy@csgroup.eu

powerpc: Untangle fixmap.h and pgtable.h and mmu.h

fixmap.h need pgtable.h for [un]map_kernel_page()

pgtable.h need fixmap.h for FIXADDR_TOP.

Untangle the two files by moving FIXADDR_TOP into pgtable.h

Also move VIRT_IMMR_BASE to fixmap.h to avoid fixmap.h in mmu.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5eba12392a018be28ad0a02ed844767b132589e7.1695659959.git.christophe.leroy@csgroup.eu

powerpc: Remove pte_ERROR()

pte_ERROR() is used neither in powerpc code nor in common mm code.

Remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/bec9eb973ecc1cba091e5c9201d877a7797f3242.1695659959.git.christophe.leroy@csgroup.eu

powerpc/32s: Cleanup the mess in __set_pte_at()

__set_pte_at() handles 3 main cases with #ifdefs plus the 'percpu'
subcase which leads to code duplication.

Rewrite the function using IS_ENABLED() to minimise the total number
of cases and remove duplicated code.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2322dd08217bccab25456fe8b189edf0e6a8b6dd.1692121353.git.christophe.leroy@csgroup.eu

mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma()

The x86 Shadow stack feature includes a new type of memory called shadow
stack. This shadow stack memory has some unusual properties, which requires
some core mm changes to function properly.

One of these unusual properties is that shadow stack memory is writable,
but only in limited ways. These limits are applied via a specific PTE
bit combination. Nevertheless, the memory is writable, and core mm code
will need to apply the writable permissions in the typical paths that
call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so
that the x86 implementation of it can know whether to create regular
writable or shadow stack mappings.

But there are a couple of challenges to this. Modifying the signatures of
each arch pte_mkwrite() implementation would be error prone because some
are generated with macros and would need to be re-implemented. Also, some
pte_mkwrite() callers operate on kernel memory without a VMA.

So this can be done in a three step process. First pte_mkwrite() can be
renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite()
added that just calls pte_mkwrite_novma(). Next callers without a VMA can
be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers
can be changed to take/pass a VMA.

Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and
adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same
pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(),
create a new arch config HAS_HUGE_PAGE that can be used to tell if
pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the
compiler would not be able to find pmd_mkwrite_novma().

No functional change.

Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/
Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com

powerpc: implement the new page table range API

Add set_ptes(), update_mmu_cache_range() and flush_dcache_folio(). Change
the PG_arch_1 (aka PG_dcache_dirty) flag from being per-page to per-folio.

[willy@infradead.org: re-export flush_dcache_icache_folio()]
Link: https://lkml.kernel.org/r/ZMx1daYwvD9EM7Cv@casper.infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-22-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove __HAVE_ARCH_PTE_SWP_EXCLUSIVE

__HAVE_ARCH_PTE_SWP_EXCLUSIVE is now supported by all architectures that
support swp PTEs, so let's drop it.

Link: https://lkml.kernel.org/r/20230113171026.582290-27-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

powerpc/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on 32bit book3s

We already implemented support for 64bit book3s in commit bff9beaa2e80
("powerpc/pgtable: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE for book3s")

Let's support __HAVE_ARCH_PTE_SWP_EXCLUSIVE also in 32bit by reusing yet
unused LSB 2 / MSB 29. There seems to be no real reason why that bit
cannot be used, and reusing it avoids having to steal one bit from the
swap offset.

While at it, mask the type in __swp_entry().

Link: https://lkml.kernel.org/r/20230113171026.582290-18-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

powerpc/mm: Make PAGE_KERNEL_xxx macros grep-friendly

Avoid multi-lines to help getting a complete view when using
grep. They still remain under the 100 chars limit.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3bc3f5a51949ee7f52dba36677db23d4337c7995.1662544980.git.christophe.leroy@csgroup.eu

powerpc/mm: Reduce redundancy in pgtable.h

PAGE_KERNEL_TEXT, PAGE_KERNEL_EXEC and PAGE_AGP are the same
for all powerpcs.

Remove duplicated definitions.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/92254499430d13d99e4a4d7e9ad8e8284cb35380.1662544974.git.christophe.leroy@csgroup.eu

powerpc/32s: Make pte_update() non atomic on 603 core

On 603 core, TLB miss handler don't do any change to the
page tables so pte_update() doesn't need to be atomic.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cc89d3c11fc9c742d0df3454a657a3a00be24046.1643538554.git.christophe.leroy@csgroup.eu

powerpc: Add pmd_pfn()

This is straightforward for everything except nohash64 where we
indirect through pmd_page(). There must be a better way to do this.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

powerpc/fixmap: Fix VM debug warning on unmap

Unmapping a fixmap entry is done by calling __set_fixmap()
with FIXMAP_PAGE_CLEAR as flags.

Today, powerpc __set_fixmap() calls map_kernel_page().

map_kernel_page() is not happy when called a second time
for the same page.

WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8
CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682
NIP: c0017cd4 LR: c00187f0 CTR: 00000010
REGS: e1011d50 TRAP: 0700 Not tainted (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000208 XER: 00000000

GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c
GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000
NIP [c0017cd4] set_pte_at+0xc/0x1e8
LR [c00187f0] map_kernel_page+0x9c/0x100
Call Trace:
[e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable)
[e1011e30] [c0165fec] __set_fixmap+0x30/0x44
[e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170
[e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0
[e1011e90] [c0c03634] do_one_initcall+0x80/0x178
[e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250
[e1011f20] [c0007e34] kernel_init+0x24/0x140
[e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010
4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030

Implement unmap_kernel_page() which clears an existing pte.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu

powerpc/32s: Remove asm/book3s/32/hash.h

Move the PAGE bits into pgtable.h to be more similar to book3s/64.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f4aaa479569328a1e5b07c96c08fbca0cd7dd88.1620307890.git.christophe.leroy@csgroup.eu

powerpc/32s: Define a MODULE area below kernel text all the time

On book3s/32, the segment below kernel text is used for module
allocation when CONFIG_STRICT_KERNEL_RWX is defined.

In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, use that segment below PAGE_OFFSET at all time.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a46dcdd39a9e80b012d86c294c4e5cd8d31665f3.1617283827.git.christophe.leroy@csgroup.eu

powerpc/32s: Inline flush_hash_entry()

flush_hash_entry() is a simple function calling
flush_hash_pages() if it's a hash MMU or doing nothing otherwise.

Inline it.

And use it also in __ptep_test_and_clear_young().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9af895be7d4b404d40e749a2659552fd138e62c4.1603348103.git.christophe.leroy@csgroup.eu

powerpc: Fix incorrect stw{, ux, u, x} instructions in __set_pte_at

The placeholder for instruction selection should use the second
argument's operand, which is %1, not %0. This could generate incorrect
assembly code if the memory addressing of operand %0 is a different
form from that of operand %1.

Also remove the %Un placeholder because having %Un placeholders
for two operands which are based on the same local var (ptep) doesn't
make much sense. By the way, it doesn't change the current behaviour
because "<>" constraint is missing for the associated "=m".

[chleroy: revised commit log iaw segher's comments and removed %U0]

Fixes: 9bf2b5cdc5fe ("powerpc: Fixes for CONFIG_PTE_64BIT for SMP support")
Cc: <stable@vger.kernel.org> # v2.6.28+
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/96354bd77977a6a933fe9020da57629007fdb920.1603358942.git.christophe.leroy@csgroup.eu

arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = a27bd01c
[00000000] *pgd=236a0003, *pmd=1ffa64003
Internal error: Oops: 207 [#1] SMP ARM
Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
Hardware name: BCM2711
PC is at zs_map_object+0x94/0x338
LR is at zram_bvec_rw.constprop.0+0x330/0xa64
pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013
sp : e376bbe0 ip : 00000000 fp : c1e2921c
r10: 00000002 r9 : c1dda730 r8 : 00000000
r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000
r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5383d Table: 235c2a80 DAC: fffffffd
Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.

I looked up the possible number of bits in source code and
datasheets, here is what I found:

- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
support more than 32 bits, even though supersections in theory allow
up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
XPA supports up to 60 bits in theory, but 40 bits are more than
anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit
addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit
addressing. There is no highmem support on RISC-V, so anything
above 2GB is unused, but it might be useful to eventually support
CONFIG_ZRAM for high pages.

Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX

When STRICT_KERNEL_RWX is set, we want to set NX bit on vmalloc
segments. But modules require exec.

Use a dedicated segment for modules. There is not much space
above kernel, and we don't waste vmalloc space to do alignment.
Therefore, we take the segment before PAGE_OFFSET for modules.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb8faba9148b6cf17c696ba776b4e8ee2f6313bf.1593428200.git.christophe.leroy@csgroup.eu

mm: consolidate pte_index() and pte_offset_*() definitions

All architectures define pte_index() as

(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)

and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().

For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.

Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.

The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.

The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().

[rppt@linux.ibm.com: v2]
Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: add support for folded p4d page tables

Implement primitives necessary for the 4th level folding, add walks of p4d
level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h.

[rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function]
Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com
[rppt@linux.ibm.com; build fix]
Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: James Morse <james.morse@arm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mm: Standardise pte_update() prototype between PPC32 and PPC64

PPC64 takes 3 additional parameters compared to PPC32:
- mm
- address
- huge

These 3 parameters will be needed in order to perform different
action depending on the page size on the 8xx.

Make pte_update() prototype identical for PPC32 and PPC64.

This allows dropping an #ifdef in huge_ptep_get_and_clear().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/38111acf6841047a8addde37c63e92d611ee38c2.1589866984.git.christophe.leroy@csgroup.eu

powerpc/mm: Standardise __ptep_test_and_clear_young() params between PPC32 and PPC64

On PPC32, __ptep_test_and_clear_young() takes the mm->context.id

In preparation of standardising pte_update() params between PPC32 and
PPC64, __ptep_test_and_clear_young() need mm instead of mm->context.id

Replace context param by mm.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0a65470e50a14373b7c2291184514aa982462255.1589866984.git.christophe.leroy@csgroup.eu

powerpc/mm: Refactor pte_update() on book3s/32

When CONFIG_PTE_64BIT is set, pte_update() operates on
'unsigned long long'
When CONFIG_PTE_64BIT is not set, pte_update() operates on
'unsigned long'

In asm/page.h, we have pte_basic_t which is 'unsigned long long'
when CONFIG_PTE_64BIT is set and 'unsigned long' otherwise.

Refactor pte_update() using pte_basic_t.

While we are at it, drop the comment on 44x which is not applicable
to book3s version of pte_update().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c78912bc8613fb249c3d80aeb1062796b5c49400.1589866984.git.christophe.leroy@csgroup.eu

powerpc: Replace _ALIGN() by ALIGN()

_ALIGN() is specific to powerpc
ALIGN() is generic and does the same

Replace _ALIGN() by ALIGN()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/4006d9c8e69f8eaccee954899f6b5fb76240d00b.1587407777.git.christophe.leroy@c-s.fr

powerpc: Replace _ALIGN_DOWN() by ALIGN_DOWN()

_ALIGN_DOWN() is specific to powerpc
ALIGN_DOWN() is generic and does the same

Replace _ALIGN_DOWN() by ALIGN_DOWN()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/3911a86d6b5bfa7ad88cd7c82416fbe6bb47e793.1587407777.git.christophe.leroy@c-s.fr

powerpc/mm: Don't kmap_atomic() in pte_offset_map() on PPC32

On PPC32, pte_offset_map() does a kmap_atomic() in order to support
page tables allocated in high memory, just like ARM and x86/32.

But since at least 2008 and commit 8054a3428fbe ("powerpc: Remove dead
CONFIG_HIGHPTE"), page tables are never allocated in high memory.

When the page is in low mem, kmap_atomic() just returns the page
address but still disable preemption and pagefault. And it is
not an inlined function, so we suffer function call for no reason.

Make pte_offset_map() the same as pte_offset_kernel() and make
pte_unmap() void, in the same way as PPC64 which doesn't have HIGHMEM.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/03c97f0f6b3790d164822563be80f2fd4713a955.1581932480.git.christophe.leroy@c-s.fr

powerpc/32: Add support of KASAN_VMALLOC

Add support of KASAN_VMALLOC on PPC32.

To allow this, the early shadow covering the VMALLOC space
need to be removed once high_memory var is set and before
freeing memblock.

And the VMALLOC area need to be aligned such that boundaries
are covered by a full shadow page.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/031dec5487bde9b2181c8b3c9800e1879cf98c1a.1579024426.git.christophe.leroy@c-s.fr

powerpc: use the generic dma coherent remap allocator

This switches to using common code for the DMA allocations, including
potential use of the CMA allocator if configured.

Switching to the generic code enables DMA allocations from atomic
context, which is required by the DMA API documentation, and also
adds various other minor features drivers start relying upon. It
also makes sure we have on tested code base for all architectures
that require uncached pte bits for coherent DMA allocations.

Another advantage is that consistent memory allocations now share
the general vmalloc pool instead of needing an explicit careout
from it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # tested on 8xx
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814132230.31874-2-hch@lst.de

powerpc/mm: refactor ioremap vm area setup.

PPC32 and PPC64 are doing the same once SLAB is available.
Create a do_ioremap() function that calls get_vm_area and
do the mapping.

For PPC64, we add the 4K PFN hack sanity check to __ioremap_caller()
in order to avoid using __ioremap_at(). Other checks in __ioremap_at()
are irrelevant for __ioremap_caller().

On PPC64, VM area is allocated in the range [ioremap_bot ; IOREMAP_END]
On PPC32, VM area is allocated in the range [VMALLOC_START ; VMALLOC_END]

Lets define IOREMAP_START is ioremap_bot for PPC64, and alias
IOREMAP_START/END to VMALLOC_START/END on PPC32

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42e7e36ad32e0fdf76692426cc642799c9f689b8.1566309263.git.christophe.leroy@c-s.fr

powerpc/mm: make ioremap_bot common to all

Drop multiple definitions of ioremap_bot and make one common to
all subarches.

Only CONFIG_PPC_BOOK3E_64 had a global static init value for
ioremap_bot. Now ioremap_bot is set in early_init_mmu_global().

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/920eebfd9f36f14c79d1755847f5bf7c83703bdd.1566309262.git.christophe.leroy@c-s.fr

powerpc/32: make KVIRT_TOP dependent on FIXMAP_START

When we add KASAN shadow area, KVIRT_TOP can't be anymore fixed
at 0xfe000000.

This patch uses FIXADDR_START to define KVIRT_TOP.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX

Today, STRICT_KERNEL_RWX is based on the use of regular pages
to map kernel pages.

On Book3s 32, it has three consequences:
- Using pages instead of BAT for mapping kernel linear memory severely
impacts performance.
- Exec protection is not effective because no-execute cannot be set at
page level (except on 603 which doesn't have hash tables)
- Write protection is not effective because PP bits do not provide RO
mode for kernel-only pages (except on 603 which handles it in software
via PAGE_DIRTY)

On the 603+, we have:
- Independent IBAT and DBAT allowing limitation of exec parts.
- NX bit can be set in segment registers to forbit execution on memory
mapped by pages.
- RO mode on DBATs even for kernel-only blocks.

On the 601, there is nothing much we can do other than warn the user
about it, because:
- BATs are common to instructions and data.
- BAT do not provide RO mode for kernel-only blocks.
- segment registers don't have the NX bit.

In order to use IBAT for exec protection, this patch:
- Aligns _etext to BAT block sizes (128kb)
- Set NX bit in kernel segment register (Except on vmalloc area when
CONFIG_MODULES is selected)
- Maps kernel text with IBATs.

In order to use DBAT for exec protection, this patch:
- Aligns RW DATA to BAT block sizes (4M)
- Maps kernel RO area with write prohibited DBATs
- Maps remaining memory with remaining DBATs

Here is what we get with this patch on a 832x when activating
STRICT_KERNEL_RWX:

Symbols:
c0000000 T _stext
c0680000 R __start_rodata
c0680000 R _etext
c0800000 T __init_begin
c0800000 T _sinittext

~# cat /sys/kernel/debug/block_address_translation
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 Kernel EXEC coherent
1: 0xc0400000-0xc05fffff 0x00400000 Kernel EXEC coherent
2: 0xc0600000-0xc067ffff 0x00600000 Kernel EXEC coherent
3: -
4: -
5: -
6: -
7: -

---[ Data Block Address Translation ]---
0: 0xc0000000-0xc07fffff 0x00000000 Kernel RO coherent
1: 0xc0800000-0xc0ffffff 0x00800000 Kernel RW coherent
2: 0xc1000000-0xc1ffffff 0x01000000 Kernel RW coherent
3: 0xc2000000-0xc3ffffff 0x02000000 Kernel RW coherent
4: 0xc4000000-0xc7ffffff 0x04000000 Kernel RW coherent
5: 0xc8000000-0xcfffffff 0x08000000 Kernel RW coherent
6: 0xd0000000-0xdfffffff 0x10000000 Kernel RW coherent
7: -

~# cat /sys/kernel/debug/segment_registers
---[ User Segments ]---
0x00000000-0x0fffffff Kern key 1 User key 1 VSID 0xa085d0
0x10000000-0x1fffffff Kern key 1 User key 1 VSID 0xa086e1
0x20000000-0x2fffffff Kern key 1 User key 1 VSID 0xa087f2
0x30000000-0x3fffffff Kern key 1 User key 1 VSID 0xa08903
0x40000000-0x4fffffff Kern key 1 User key 1 VSID 0xa08a14
0x50000000-0x5fffffff Kern key 1 User key 1 VSID 0xa08b25
0x60000000-0x6fffffff Kern key 1 User key 1 VSID 0xa08c36
0x70000000-0x7fffffff Kern key 1 User key 1 VSID 0xa08d47
0x80000000-0x8fffffff Kern key 1 User key 1 VSID 0xa08e58
0x90000000-0x9fffffff Kern key 1 User key 1 VSID 0xa08f69
0xa0000000-0xafffffff Kern key 1 User key 1 VSID 0xa0907a
0xb0000000-0xbfffffff Kern key 1 User key 1 VSID 0xa0918b

---[ Kernel Segments ]---
0xc0000000-0xcfffffff Kern key 0 User key 1 No Exec VSID 0x000ccc
0xd0000000-0xdfffffff Kern key 0 User key 1 No Exec VSID 0x000ddd
0xe0000000-0xefffffff Kern key 0 User key 1 No Exec VSID 0x000eee
0xf0000000-0xffffffff Kern key 0 User key 1 No Exec VSID 0x000fff

Aligning _etext to 128kb allows to map up to 32Mb text with 8 IBATs:
16Mb + 8Mb + 4Mb + 2Mb + 1Mb + 512kb + 256kb + 128kb (+ 128kb) = 32Mb
(A 9th IBAT is unneeded as 32Mb would need only a single 32Mb block)

Aligning data to 4M allows to map up to 512Mb data with 8 DBATs:
16Mb + 8Mb + 4Mb + 4Mb + 32Mb + 64Mb + 128Mb + 256Mb = 512Mb

Because some processors only have 4 BATs and because some targets need
DBATs for mapping other areas, the following patch will allow to
modify _etext and data alignment.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: add exec protection on powerpc 603

The 603 doesn't have a HASH table, TLB misses are handled by
software. It is then possible to generate page fault when
_PAGE_EXEC is not set like in nohash/32.

There is one "reserved" PTE bit available, this patch uses
it for _PAGE_EXEC.

In order to support it, set_pte_filter() and
set_access_flags_filter() are made common, and the handling
is made dependent on MMU_FTR_HPTE_TABLE

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Extend pte_fragment functionality to PPC32

In order to allow the 8xx to handle pte_fragments, this patch
extends the use of pte_fragments to PPC32 platforms.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/book3s32: Remove CONFIG_BOOKE dependent code

BOOK3S/32 cannot be BOOKE, so remove useless code

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/32: Remove #ifdef CONFIG_PPC_STD_MMU_32 in asm/book3s/32/pgtable.h

asm/book3s/32/pgtable.h is only included when CONFIG_PPC_BOOK3S_32 is set.
Whenever CONFIG_PPC_BOOK3S_32 is set, CONFIG_PPC_STD_MMU_32 is set as well.

This patch removes useless CONFIG_PPC_STD_MMU_32 #ifdefs

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

hugetlb: introduce generic version of huge_ptep_set_wrprotect()

arm, ia64, mips, powerpc, sh, x86 architectures use the same version of
huge_ptep_set_wrprotect, so move this generic implementation into
asm-generic/hugetlb.h.

Link: http://lkml.kernel.org/r/20180920060358.16606-10-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mm: Make pte_pgprot return all pte bits

Other archs do the same and instead of adding required pte bits (which
got masked out) in __ioremap_at(), make sure we filter only pfn bits
out.

Fixes: 26973fa5ac0e ("powerpc/mm: use pte helpers in generic code")
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/book3s/32: do not include pte-common.h

As done for book3s/64, add necessary flags/defines in
book3s/32/pgtable.h and do not include pte-common.h

It allows in the meantime to remove all related hash
definitions from pte-common.h and to also remove
_PAGE_EXEC default as _PAGE_EXEC is defined on all
platforms except book3s/32.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: use pte helpers in generic code

Get rid of platform specific _PAGE_XXXX in powerpc common code and
use helpers instead.

mm/dump_linuxpagetables.c will be handled separately

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: add pte helpers to query and change pte flags

In order to avoid using generic _PAGE_XXX flags in powerpc
core functions, define helpers for all needed flags:
- pte_mkuser() and pte_mkprivileged() to set/unset and/or
unset/set _PAGE_USER and/or _PAGE_PRIVILEGED
- pte_hashpte() to check if _PAGE_HASHPTE is set.
- pte_ci() check if cache is inhibited (already existing on book3s/64)
- pte_exprotect() to protect against execution
- pte_exec() and pte_mkexec() to query and set page execution
- pte_mkpte() to set _PAGE_PTE flag.
- pte_hw_valid() to check _PAGE_PRESENT since pte_present does
something different on book3s/64.

On book3s/32 there is no exec protection, so pte_mkexec() and
pte_exprotect() are nops and pte_exec() returns always true.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: don't use _PAGE_EXEC in book3s/32

book3s/32 doesn't define _PAGE_EXEC, so no need to use it.

All other platforms define _PAGE_EXEC so no need to check
it is not NUL when not book3s/32.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: handover page flags with a pgprot_t parameter

In order to avoid multiple conversions, handover directly a
pgprot_t to map_kernel_page() as already done for radix.

Do the same for __ioremap_caller() and __ioremap_at().

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/book3s: Remove PPC_PIN_SIZE

PPC_PIN_SIZE is specific to the 44x and is defined in mmu.h

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/405: move PPC405_ERR77 in asm-405.h

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang

When relaxing access (read -> read_write update), pte needs to be marked invalid
to handle a nest MMU bug. We also need to do a tlb flush after the pte is
marked invalid before updating the pte with new access bits.

We also move tlb flush to platform specific __ptep_set_access_flags. This will
help us to gerid of unnecessary tlb flush on BOOK3S 64 later. We don't do that
in this patch. This also helps in avoiding multiple tlbies with coprocessor
attached.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Change function prototype

In later patch, we use the vma and psize to do tlb flush. Do the prototype
update in separate patch to make the review easy.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Fix crashes with 16G huge pages

To support memory keys, we moved the hash pte slot information to the
second half of the page table. This was ok with PTE entries at level
4 (PTE page) and level 3 (PMD). We already allocate larger page table
pages at those levels to accomodate extra details. For level 4 we
already have the extra space which was used to track 4k hash page
table entry details and at level 3 the extra space was allocated to
track the THP details.

With hugetlbfs PTE, we used this extra space at the PMD level to store
the slot details. But we also support hugetlbfs PTE at PUD level for
16GB pages and PUD level page didn't allocate extra space. This
resulted in memory corruption.

Fix this by allocating extra space at PUD level when HUGETLB is
enabled.

Fixes: bf9a95f9a648 ("powerpc: Free up four 64K PTE bits in 64K backed HPTE pages")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Add proper pte access check helper for other platforms

pte_access_premitted get called in get_user_pages_fast path. If we
have marked the pte PROT_NONE, we should not allow a read access on
the address. With the current implementation we are not checking the
READ and only check for WRITE. This is needed on archs like ppc64 that
implement PROT_NONE using _PAGE_USER access instead of _PAGE_PRESENT.
Also add pte_user check just to make sure we are not accessing kernel
mapping.

Even though there is code duplication, keeping the low level pte
accessors different for different platforms helps in code readability.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/hugetlb: fix page rights verification in gup_hugepte()

gup_hugepte() checks if pages are present and readable, and
when 'write' is set, also checks if the pages are writable.

Initially this was done by checking if _PAGE_PRESENT and
_PAGE_READ were set. In addition, _PAGE_WRITE was verified for write
accesses.

The problem is that we have to handle the three following cases:
1/ The target defines __PAGE_READ and __PAGE_WRITE
2/ The target defines __PAGE_RW
3/ The target defines __PAGE_RO

In case 1/, this is obvious
In case 2/, __PAGE_READ is defined as 0 and __PAGE_WRITE as __PAGE_RW
so it works as well.
But in case 3, __PAGE_RW is defined as 0, which means __PAGE_WRITE is 0
and then the test returns true (page writable) in all cases.

A first correction was attempted in commit 6b8cb66a6a7cc ("powerpc: Fix
usage of _PAGE_RO in hugepage"), but that fix is wrong:
instead of checking that the page is writable when write is requested,
it checks that the page is NOT writable when write is NOT requested.

This patch adds a new pte_read() helper to check whether a page is
readable or not. This avoids handling all possible cases in
gup_hugepte().

Then gup_hugepte() is modified to use pte_present(), pte_read()
and pte_write() instead of the raw flags.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: declare some local functions static

get_pteptr() and __mapin_ram_chunk() are only used locally,
so define them static

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Rename map_page() to map_kernel_page() on 32-bit

These two functions implement the same semantics, so unify their naming so we
can share code that calls them. The longer name is more descriptive so use it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch, mm: convert all architectures to use 5level-fixup.h

If an architecture uses 4level-fixup.h we don't need to do anything as
it includes 5level-fixup.h.

If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK
before inclusion of the header. It makes asm-generic code to use
5level-fixup.h.

If an architecture has 4-level paging or folds levels on its own,
include 5level-fixup.h directly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: port 64 bits pgtable_cache to 32 bits

Today powerpc64 uses a set of pgtable_caches while powerpc32 uses
standard pages when using 4k pages and a single pgtable_cache
if using other size pages.

In preparation of implementing huge pages on the 8xx, this patch
replaces the specific powerpc32 handling by the 64 bits approach.

This is done by:
* moving 64 bits pgtable_cache_add() and pgtable_cache_init()
in a new file called init-common.c
* modifying pgtable_cache_init() to also handle the case
without PMD
* removing the 32 bits version of pgtable_cache_add() and
pgtable_cache_init()
* copying related header contents from 64 bits into both the
book3s/32 and nohash/32 header files

On the 8xx, the following cache sizes will be used:
* 4k pages mode:
- PGT_CACHE(10) for PGD
- PGT_CACHE(3) for 512k hugepage tables
* 16k pages mode:
- PGT_CACHE(6) for PGD
- PGT_CACHE(7) for 512k hugepage tables
- PGT_CACHE(3) for 8M hugepage tables

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Scott Wood <oss@buserror.net>

powerpc/mm: update radix__ptep_set_access_flag to not do full mm tlb flush

When we are updating a pte, we just need to flush the tlb mapping
that pte. Right now we do a full mm flush because we don't track the page
size. Now that we have page size details in pte use that to do the
optimized flush

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm/radix: Use different pte update sequence for different POWER9 revs

POWER9 DD1 requires pte to be marked invalid (V=0) before updating
it with the new value. This makes this distinction for the different
revisions.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Move PTE bits from generic functions to hash64 functions.

functions which operate on pte bits are moved to hash*.h and other
generic functions are moved to pgtable.h

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Don't use pmd_val, pud_val and pgd_val as lvalue

We convert them static inline function here as we did with pte_val in
the previous patch

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: Delete booke bits from book3s

We also move __ASSEMBLY__ towards the end of header. This avoid
having #ifndef __ASSEMBLY___ all over the header

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm: make a separate copy for book3s

In this patch we do:
cp pgtable-ppc32.h book3s/32/pgtable.h
cp pgtable-ppc64.h book3s/64/pgtable.h

This enable us to do further changes to hash specific config.
We will change the page table format for 64bit hash in later patches.

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>