Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Update message ring handling code for XLR/XLS

- Wakeup multiple threads per core using message ring watermark interrupts.
- Update message ring handler registration, use the real device station id
for registering interrupts.
- rge/nlge: update for the new message ring registration code.
- rge/nlge: use 2 message ring stations for incoming packets, this will
allow more messages to be queued.
- nlge: comment fixes, remove unused variable
- style and whitespace fixes

Fixes for XLR network accelerator driver (nlge).

- Process some tx done messages in the transmit path, to ensure that
the XLR NA tx done FIFO does not overflow.
- Add a message ring handler API to process atmost a given number of
messages from a specified bucket mask. This will be used to process
the tx done messages
- Add a callout to restart transmit in the case transmit gets blocked.
- Update enable_msgring_int() and disable_msgring_int(), remove unused
args and make static.

Obtained from: Sriram Gorti (srgorti at netlogicmicro dot com)

sys/mips/rmi/msgring.h - fixes and clean up.

- Remove sync from msgrng_send, sync needs to be called just once before
sending.
- Fix retry logic - don't reload registers when retrying in message_send,
also fix check for send pending fail.
- remove unused message_send_block_fast()
- merge message_receive_fast() to message_receive
- style(9) fixes, and comments
- rge and nlge updated for the sys/mips/rmi/msgring.h changes

Compilation fix - when INVARIANTS are turned off.

Clean up fast message ring code for XLR.

Fix message ring send path:
- define msgrng_access_enable() which disables local interrupts
and enables message ring access. Also define msgrng_restore() which
restores interrupts
- remove all other msgrng enable/disable macros, no need of critical_enter
and other locking here.
- message_send() fixup: re-read status until pending bit clears
- message_send_retry() fixup: retry only few times with interrupts disabled
- Fix up message_send/message_send_retry callers - call
msgrng_access_enable() and msgrng_restore() correctly so that interrupts
are not disabled for long.
- removed unused and obsolete code from sys/mips/rmi/msgring.h
- some style fixes - more later

rge.c (XLR GMAC driver):
- updated for the message ring changes
- remove unused message_send_block()
- retry on credit failure, this is not a permanent failure when credits
are configured correctly. Add panic if credits are not available to
send for a long time.

Move debug.h to the the rge driver directory. rge.c is the only user of
debug.h. Remove debug.h references from other files.

Clean up header files in RMI platform code (sys/mips/rmi), and remove
unused files.

- remove clock.c and clock.h, these are not used after the new timer
code was added.
- remove duplicated include files, fix header file ordering, remove
some unneeded includes.
- rename mips/rmi/shared_structs.h which contains the RMI boot loader
interface to mips/rmi/rmi_boot_info.h. Remove unused files
mips/rmi/shared_structs_func.h and sys/mips/rmi/shared_structs_offsets.h
- merge mips/rmi/xlrconfig.h and mips/rmi/rmi_mips_exts.h, and remove
duplicated functions.
- nlge - minor change to remove unneeded argument.
- Add FreeBSD svn keyword for headers

XLR PIC code update and style(9) fixes.

- style(9) fixes to mips/rmi platform files
- update pic.h to add pic_setup_intr() and use pic_setup_intr() for setting
up interrupts which are routed thru PIC.
- remove rmi_spin_mutex_safe and haslock, and make sure that the functions
are called only after mutexes are available.

Remove svn:executable prop.

Set the svn:eol-style = native and svn:mime-type = text/plain
properties on all files in this tree.

Submitted by: rpaulo@

Place proper svn:keywords tag on all these files. They were created
somehow without them on projects/mips, and that mistake was propigated
over to head.

Submitted by: rpaulo@

Merge from projects/mips to head by hand:

Copy over the support files (except sys/conf and sys/mips/conf) for
RMI XLR processor support. This port has been contributed by RMI and
brought up to date by Randal Stewart (rrs@). This port is a work in
progress, and there might still be significant changes. The port
makes it to multi-user, but is still early beta.

ok we now get so that the uart init's and we can print. We
cannot set baud rate as they did in 6.4, this hoses things and
we loose our 38400 default term.

We now lock somewhere in tcinit.

White space changes

> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> Security: Vulnerability reference (one per line) or description.
> Empty fields above will be automatically removed.

M rmi/xls_ehci.c
M rmi/clock.h
M rmi/xlr_pci.c
M rmi/perfmon.h
M rmi/uart_bus_xlr_iodi.c
M rmi/perfmon_percpu.c
M rmi/iodi.c
M rmi/pcibus.c
M rmi/perfmon_kern.c
M rmi/perfmon_xlrconfig.h
M rmi/pcibus.h
M rmi/tick.c
M rmi/xlr_boot1_console.c
M rmi/debug.h
M rmi/uart_cpu_mips_xlr.c
M rmi/xlrconfig.h
M rmi/interrupt.h
M rmi/xlr_i2c.c
M rmi/shared_structs.h
M rmi/msgring.c
M rmi/iomap.h
M rmi/ehcireg.h
M rmi/msgring.h
M rmi/shared_structs_func.h
M rmi/on_chip.c
M rmi/pic.h
M rmi/xlr_machdep.c
M rmi/ehcivar.h
M rmi/board.c
M rmi/clock.c
M rmi/shared_structs_offsets.h
M rmi/perfmon_utils.h
M rmi/board.h
M rmi/msgring_xls.c
M rmi/intr_machdep.c

more Updates on the RMI code close to compiling now ;-)

More initial RMI files. Note that these so far do NOT
compile and many of them may disappear. For example
the xlr_boot1_console.c is old code that is ifdef'd out.
I will clean these sorts of things up as I make progress
on the port. So far the only thing I have I think straightened
out is the bits around the interupt handling... and hey that
may be broke ;-)